It's always good to start the week off with an update video so everyone knows what's happening short-term and long-term...

I recently acquired a couple new items that I will be reviewing in the near future (along with several other reviews that I will be trying to get to ASAP!) First off is the Crosman M4-177 which is basically a multi-pump pellet and BB shooting replica of an AR or M4 styled carbine used by the US military. The Crosman M4-177 is mostly plastic on the outside but on first inspection seems to be built fairly well. It has removable metal sights and the magazine is also detachable but is not used as a magazine but rather a compartment for storage. The unit I have is the Canadian detuned version which shoots .177 caliber lead pellets and 4.5mm steel BB's at under 500 fps.

I don't currently sell the Crosman M4-177 in the Canada Replica Airguns Store but I do have it available for purchase in the US Replica Airguns Store for my US customers.

I also received my first old west blank shooting revolver (M1873), I have wanted one of these for a while and finally got my hands on one :) Unfortunately this one has a plugged barrel so it vents out of the cylinder area which may get a bit messy. I may see about making this one a front venting gun if possible and of course as long as it's within the law as I plan to make sure the cylinder stays semi plugged so no actual rounds could ever be shot out of it. The Old West M1873 Blank Revolver holds six .380 crimped blanks and is an all metal and wood construction. This should be a fun review!

I also touch upon a few other guns on the list of items I need to review and by the way in an attempt to get caught up I will be doing my Table Top and Shooting reviews combined.

Here are some of the guns that I will be reviewing over the next while...

• Gamo P-25 & PT-85 .177 Caliber Blowback Pellet pistols (This one will get done this week!)

• Daisy Powerline 5501 Blowback 4.5mm BB pistol.

• Webley Tempest .177 & .22 Caliber Spring Piston Air Pistol.

• Western Arms Smith & Wesson Shorty 40 Blowback 6mm Airsoft Pistol.

• Kimar Lady K Stainless Steel 9mm P.A.K. Blank Pistol

• EKOL Lady Chrome 9mm P.A.K. Blank Pistol. 

I have been asked many times to make some videos on some of the Accessories that I have in the Replica Airguns Store and that I use in some of my reviews. So I made this overview video of several my NcSTAR Accessories and also my BSA Red Dot that I sell a lot of.

Here are the Accessories that I cover in this YouTube Video Overview.

• NcSTAR - Pistol Laser Sight
• NcSTAR Compact Ultra Bright Green Laser with Switch
• NcSTAR Tactical Flashlight/Laser Combo
• Red Dot Scope BSA Multi-Purpose (RD30)
• NcSTAR - Tactical Fore-grip (with rail)
• NcSTAR - Quick Release Uni-Bipod

Buy Accessories in Canada   -   Buy Accessories in the US

I added another NcSTAR accessory to the Canada Replica Airguns Store, this one is a laser only but it's a green laser which creates an ultra bright beam superior in brightness to just the standard red lasers.

NcSTAR Compact Ultra Bright Green Laser with Switch

• The Compact Green laser is an ultra bright and powerful green laser in a much smaller package than was available previously.
• The Weaver/Picatinny style mount will fit virtually any Weaver and Picatinny rails, making it possible to fit onto a wide variety of firearms.
• With precise windage and elevation adjustments, you will have a: quick, powerful, and precise laser aiming devise.
• With the supplied remote pressure switch, it gives you the flexibility to mount the laser anywhere on your firearm and be able to activate the laser when you want to.
• The laser is manufactured from aircraft quality anodized aluminum.

Buy in the Canada Store  -  Buy simlar item in the US Store

We just added this new Tactical Light/Laser combo to our Canadian Replica Airguns store. If you're looking for a super high quality Weaver/Picatinny Style mount compact Tactical light and Laser combo, then the NcSTAR Tactical Flashlight/Laser Combo is a perfect choice. Yes this one is a bit more spendy but you get what you pay for, well that's what people tell me so I just pass the knowledge on to you ;)

NcSTAR Tactical Flashlight/Laser Combo

• 3 watt Flashlight puts out a White-Hot 120 Lumens
• Right below the flashlight is an integrated, Fully adjustable Red Laser.
• Small toggle switch in the rear allows you to illuminate the Flashlight and Laser separately, or Both at the same time
• A Quick Release Weaver/Picatinny Style Mounting System
• Constructed of Hard Anodized Aluminum and Reinforced Nylon, this unit is sure to handle even the toughest abuse!

Buy in the Canada Store  -  Buy simlar item in the US Store

Type: BB air pistol.
Manufacturer: Swiss Arms.
Model: Sig Sauer GSR 1911.
Materials: Mostly plastic construction with a few metal parts.
Weight: 1.3 pound.
Barrel: 4.5 inches, metal non-rifled.
Propulsion: CO2 x 1.
Action: Semi auto, double action.
Ammunition Type: 4.5mm BB's.
Ammunition Capacity: 20 round magazine.
FPS: 398 claimed - 450 real world.
Trigger Pull: The Swiss Arms Sig Sauer GSR 1911 has a double action trigger with about a medium weight pull to it. It does feel somewhat long as the break point seems to take a while to get to but once you master where it is, you can shoot this BB gun with surprising accuracy.
Accuracy: Once I sorted out the laser sight which took some MacGyvering (as explained in the video), this gun shot a nice tight pattern! For my quick test I shot free standing from 20 feet away and put 8 rounds into my target taking my time. I got about a 1.5 inch group which was very good and another note worth mentioning would be the Chronograph results I got, even though the Sig Sauer GSR 1911 CO2 BB pistol has a claimed fps of 398, mine came in consistently right around 450 fps!

Build Quality: The Swiss Arms GSR 1911 is mostly plastic and has very few actual moving parts, I'm personally not too worried about it, in fact the lack of moving parts means there is less to go wrong with it! I found the fit and finish to be good overall and as long as you are OK with the plastic this gun should be just fine for you. The only thing that would have been nice to see improved would be the laser and how it is adjusted. As is out of the box without modification, you will find that it easily moves out of aim. (I do explain how I fixed this problem in my video review)
Realism: The Swiss Arms Sig Sauer GSR 1911 in terms of size and looks, is about what the real gun would look like, with the exception of the trigger which is kind of a strange looking combination of triggers mashed into one. Of course being a moulded plastic airgun, it is much lighter then the real steel 1911 and has the telltale screw holes on the right hand side. The magazine ejector does work but the real steel safety, slide catch/release, hammer and grip safety are all moulded into the plastic so they do not function. On a good note the barrel muzzle is large like a real 45 caliber adding to the realism.
Purchased this gun from: The Replica Airguns Store.

Pros:

• Much better than advertised FPS and good CO2 usage. (up to 200 shots).
• Good accuracy once you get the laser working with the gun it adds to the ease of targeting. 
• Inexpensive and comes with lots of extra stuff that ads value. (Safety Glasses, Laser Sight, Starter BB's)
• Well hidden CO2 tab and 45 caliber sized muzzle.
• Full Sig Sauer licensing, decent replica in terms of looks
• Drop out metal magazines, compatible with other airguns (Umarex Beretta Elite II, S&W M&P)

Cons:

• Pretty much all plastic and not many working parts (less to go wrong)
• light weight makes it feel a bit on the cheap side.
• Trigger action is long and takes some getting used to.
• Laser sight needs to be MacGyvered a bit to make it stay sighted in (again watch my video on how to fix this).

Comments:
The Swiss Arms Sig Sauer GSR 1911 is pretty much what you would expect from a low cost airgun in terms of build quality, lots of plastic, with less working parts. This does not take away from the performance however as the GSR 1911 performed well in both accuracy and power. It also comes with the laser sight, safety glasses and starter BB's as an added bonus for about the same price as many entry level airguns on their own. If you like ultra realistic guns then this is on may not be for you, but if you want a good performer with the replica look and combined with a value package then I think you will be more than happy with the Swiss Arms Sig Sauer GSR 1911.

My YouTube Video Review for the Swiss Arms Sig Sauer GSR 1911 CO2 Air Pistol:

Buy Swiss Arms GSR 1911 in Canada

Type: Airsoft.

Manufacturer:Western Arms (WA).

Model:Shorty 40.

Materials: Polymer & Metal.

Weight: 1.7 pounds.

Barrel: 3 inches, metal.

Propulsion: GBB

Action: Semi auto, single & double action.

Ammunition Type: 6mm plastic BB (recommended .20 gram).

Ammunition Capacity: 20 round magazine.

FPS: 260-270.

Trigger Pull: The trigger pull on the Western Arms Smith & Wesson Shorty 40 is very light in both single and double action but of course the lightest when shooting in single action mode. The single action is short with next to no reset making for very quick followup shots. If you have de-cocked the gun using the de-cocker, you may find it hard to re-cock again as there is no exposed hammer to grab. You will need to pull the trigger just a bit to expose the hammer and then pull it back the rest of the way as per normal.

Accuracy: This is now the third Airsoft gun I have tested and I always assumed Airsoft guns would not be nearly as accurate as my metal BB shooters but again I have been proven wrong! The WA S&W Shorty 40 even with its short 3 inch barrel got a nice 2 inch group my first time testing it out from 20 feet out in a free standing position. And 4 shots got right in the bullseye! Considering this Airsoft gun was supposed to be non-working, it worked pretty good for me!

Build Quality: When you first pickup the Western Arms Smith & Wesson Shorty .40, you immediately think it is an all metal gun since it's all black and has really good weight to it sitting in at 1.7 pounds and in a very small package. On close up inspection the WA Shorty 40 has a lot of plastic in it including the slide and the frame. Polymer frames are not uncommon and to be honest if the gun looks and feels like metal but is actually plastic, there are some benefits. This review model being used has seen some action but it looks pretty much like a brand new gun, the reason being is because of the plastic exterior - in general, plastic is not painted but rather the color is throughout the material so it will not rub off or show a scratch nearly as much as a painted or blued finishe which will show the grey metal underneath. And to be fair, my Western Arms Shorty 40 has lots of high quality metal parts where they really need to be like the magazine, magazine release, slide catch, trigger, hammer, barrel and many other internal parts.

Realism: From looking at photos of the real Smith & Wesson Shorty 40, I can say the Airsoft version is a dead ringer. The Western Arms version has all the markings and and licensing in all the right places and from what I can tell without actually having used the real steel version, it seems to function and even field strip like the real .40 caliber model. The only real telltale sign are the plastic parts but as I said before it is very hard to tell because of this Airsoft guns heavy weight.

Purchased From: Used.

Pros:

• I got this one as a bargain ($50) to say the least.

• Very realistic replica with full licensing.

• Seems to be very accurate for a short barreled Airsoft pistol.

• Decent FPS for a compact GBB Airsoft gun.

• Even thought the frame and slide are polymer, it has very good weight and feel to it.

• Everything works like the original, field strips and most mechanical parts are metal.

• Safety also works as the de-cocker.

• Adjustable rear sight for windage.

• Very nice light single and double action trigger.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Hard to find this one, not in production as far as I know?

• Plastic slide and frame but still very high quality.

• Seems to go through gas fast - 20 BB's and it's done!

Comments:

For those of you who have been a bit down on the Airsoft guns I have been reviewing, maybe you just haven't put your hands on the right ones so far? I am now on my third Airsoft product review and I have received all kinds of comments from people ranging from very positive to very negative, with some people comparing Airsoft guns to kids toys. The funny thing is it's all about perspective - people who only shoot powder burners will say an Airgun is a toy but again many powder burner shooters also shoot airguns for economical and practical reasons. I think we should respect peoples interest and if it's not for you then stick with what is for you but at least first give it a chance. I plan to take part in some Airsoft games so this is a great time for me to see what Airsoft guns I like and will work well once I get in a battle situation. Now getting back to the Western Arms Smith & Wesson Shorty 40 at hand... It is a pleasure to shoot and for a "Broken" gun it sure works well, I wonder what a new pristine condition one would shoot like? It's hard for me to tell you to go out and buy one since they are not readily available but if you do manage to come across one, grab it if you can!

My Vimeo Video Review for the Western Arms Smith & Wesson Shorty 40 Airsoft Pistol:

Buy Airsoft guns in Canada   -   Buy Airsoft Pistols in the US

I already mentioned all three of these gun in my previous posts, two being Airsoft: the King Arms Colt M4A1 All Metal and my Western Arms Shorty .40. And one being a 4.5mm steel BB shooter, the Swiss Arms Sig Sauer GSR 1911. I wanted to make you a quick YouTube Preview video to show you around all three replica guns before I get around to actually doing my full reviews for each of them.

I will most likely start off with my King Arms Colt M4A1 All Metal Airsoft rifle, then review my Swiss Arms Sig Sauer GSR 1911 4.5mm BB pistol, then finish off with my deal Airsoft pistol, the Western Arms Shorty 40.

This preview video should give you a good idea about these guns, but make sure to stay tuned for my full review videos for each of them.

Buy this Airsoft rifle in Canada   -   Buy this Airsoft rifle in the US

Buy Swiss Arms GSR 1911 in Canada

Every once in a while you get kind of lucky and get a real steel on something. Here in Canada, getting your hands on an "all black" Airsoft pistol is kind of hard since they are literally impossible to import as they are considered replicas unless they shoot "over" a set fps which most Airsoft pistols have trouble obtaining. There are some all black guns floating around from before the import restriction and there are some that slip through the cracks.

Yesterday I went into my local Army Surplus store (they also sell Airsoft guns) and saw a rather interesting little black pistol in behind the glass, something I had never seen before. When I looked at it a bit close it was in fact an all black GBB Airsoft pistol version of the Smith & Wesson .40 caliber Shorty! The sales person quickly told me the $50 price tag was because it was non-functioning or as he called it a "Grave Yard Special" I though hey, makes for a nice replica even if it does not work and so I bought it on the spot.

As is pretty normal for me, I rarely take anyone at their word and like to check things out for myself. So I loaded the magazine up with propane, added 20 BB's to the magazine and headed to my deck to give it a try. 20 rounds later and with my slide locked back I came to the conclusion that there was nothing wrong with this Airsoft catch of the day!

If your wondering where to get one I am not really sure, I did see them online in some overseas sites for around $220 or so. So my $50 was well spent ;)

I am in the process of making a "preview video" of this gun and will do a follow up full review video down the road a bit.

 Buy Airsoft guns in Canada   -   Buy Airsoft Pistols in the US

If you have not already read my Table Top review for the WE SCAR-L, then make sure to check it out for specifications and an overall review of this very nice Blowback Airsoft rifle.

This Field Test review kind of baffled me, I was surprised with almost everything about it. Initially when I got my WE SCAR, I tested it out with one of my CO2 mags and got some pretty decent results not only in FPS performance but also in the accuracy department, I got around 400+fps and a nice 2 inch group from 30 feet out in a semi-rested position.

So when I headed out to record my Field Test, I was expecting some decent results! I'm not going to say this gun let me down but it did perform radically different for me on this day then the previous day and the only real difference is that I did a complete filed strip, clean and lube of the Airsoft rifle which in my opinion should of improved things but I guess not?

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

The most surprising realization I had was that with CO2 (as compared to the Propane), I did notice a heavier blowback and faster rate of fire in full auto but for some reason I had less velocity by almost 100fps when compared to using my Propane magazine? And my accuracy suffered also by an amazing amount. Some rounds had trouble even getting on the paper?

I will revisit this rifle in the summer, I think I will strip it down and wipe it down and perhaps redo this test entirely! I still love this Airsoft blowback rifle for so many reasons but on this day at least it came up a bit short for me.

My Vimeo Video Field Test Review for the WE AWSS SCAR-L - SCAR Type Rifle:

Buy Airsoft rifles in Canada

Buy Airsoft rifles in the US

Make sure to also watch my Field Test Review for the WE SCAR-L!

Type: Airsoft.

Manufacturer:WE.

Model:AWSS SCAR-L Generation 3 Closed Bolt (Tan).

Materials: Metal & Polymer.

Weight: 6.9 pounds.

Barrel: 11.5 inches, metal.

Propulsion: Green-gas - propane - CO2

Action: Semi/full auto, single action.

Ammunition Type: 6mm Plastic BB.

Ammunition Capacity: 30 round magazine.

FPS: 450.

Trigger Pull: The trigger pull on the WE SCAR is very short and light. You can shoot this gun very quickly, that is after you recover from the very heavy blowback action you can really feel in your shoulder.

Accuracy: I thought I would test this Airsoft rifle just like I do my other BB guns, why put it in a class by it's self? So I put about 10 rounds into a target from 30 feet out using a semi rested position (sand bag in the front - standing in the rear). I was using a non magnified red dot so there was going to be some variance on the target from that range no doubt. When I walked up to the paper I was rather stunned as this Airsoft rifle shooting .25 gram plastic BB's got a 2 inch 10 round grouping! This makes for an awesome plinker - Airsoft or not!

Build Quality: The WE AWSS SCAR is very well made with a full CNC Aluminum Upper, all steel internals and very high quality polymer lower receiver and folding stock. As far as I could tell all the external mechanical parts are also metal including the trigger, selector switch magazine release, bolt catch release, charging handle. all accessory rails and sights and anything else I missed! The Magazine is also metal.

Realism: One thing about most Airsoft guns is the attention to realism and in this area they generally have the edge over their 4.5mm Steel BB shooting brothers. This WE SCAR copy is 100% true in design and even field strips exactly like the real NATO round firing version. It even has the true marking indicating "MK 16MOD O and CAL. 5.56 MM." on the upper receiver. Like the real SCAR, everything functions the same including the semi auto and full auto selector switch :)

Purchased From: Private sale.

Pros:

• Amazing attention to detail.

• All CNC aluminium upper.

• All metal internals and metal external mechanical parts.

• Semi auto & full auto selectable.

• Awesome blowback kick really hits you in the shoulder.

• Field strips just like the real steal.

• Nice high 400+ FPS even with .25 gram BB's

• Extremely accurate for plastic BB's.

• Full ambidextrous, even the charging handle can be switch side to side.

• Can use propane or CO2 with the appropriate magazine.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Not cheap to buy in Canada.

• Eats CO2 pretty quickly.

• Because of heavy blowback, you need to check wear and tear on the parts often.

• May be too powerful for skirmishes without some detuning.

Comments:

This is really my first Airsoft review and for the most part my first real serious Airsoft gun. I do have a Crosman M50 (UZI copy) that I bought a while back and I will review it also but it was one of those Canadian see through guns that look like kids toys :( Getting back to the WE AWSS SCAR-L... I just love the design of this type of rifle, I even bought the almost exact same gun in a .22 rimefire - the ISSC MK22 SCAR, check that review out if you have are looking for  a .22LR gun. Again getting back to the WE AWSS SCAR-L!! It's got so much going for it. Quality, realism, performance, made by a reputable Airsoft company and as far as GBB Airsoft guns go it is well priced!

For those that like to skirmish or use these in Airsoft war games, they may want to go with the AEG (Automatic Electric Gun) version because they require less reloading and have more sustained FPS. But for me since I don't really do any Airsoft war games, well at least not yet? I kind of like the realism of the blowback with its kick and more realistic magazine capacities. Since I go after the most realistic guns I can get, this Airsoft rifle really speaks to me and just because it shoots a plastic BB rather then a metal BB, I really can't say it makes to much difference for what I'm shooting at anyways. I point it at stuff and the stuff gets knocked down and generally with the same hole in it my 4.5mm BB's would have made. Look forward to more Airsoft reviews in the future...

My Vimeo Video Review for the WE AWSS SCAR-L - SCAR Type Rifle:

Buy Airsoft rifles in Canada   -   Buy Airsoft rifles in the US

I wanted to get this video out to you a bit sooner but I have been really sick the past three days and so I have not had a lot of time to put this YouTube Video together. It's a pretty simple compilation of some photos and videos I took during my time walking around the 2012 SHOT Show in Las Vegas, not all of it is to do with airguns but most of it is. I even took a few touristy shots since it wasn't all work ;)

This isn't an Airsoft review just yet but I will be reviewing the WE SCAR Gas Blowback 6mm Airsoft Rifle next week, I just purchased this one used from another fellow YouTuber "FuzzyDicePimp" who was gracious enough to sell me his.

You will have to bare with me a bit on this first review as I more experience with Airguns so I think my first Airsoft review may be a bit more of me comparing the WE AWSS SCAR-L to my airguns but then again I don't really have that many tactical rifle styled air guns to compare it to.

The WE SCAR I am reviewing is a generation 3 with the closed bolt system, it came with a gas magazine but I purchased a couple of CO2 mags as that is more what I am use to. So we will see if I can get a propane converter and I can do a comparison of the two magazines in my review.

My first impression of this gun is "WOW" FuzzyDicePimp sent it to me with some juice in the magazine so I shot a few rounds through it. I had some .12 gram 6mm Airsoft BB's lying around and I also had some 6mm steel ball bearings, both of these really seemed to shoot hard and the blowback on the WE SCAR is very solid.

Check back next week for more on this very nice Airsoft Rifle.

Buy Airsoft rifles in Canada   -   Buy Airsoft rifles in the US

We now have some extra magazines available for our popular BB shooting Colt Special Combat! Not only odes the magazine hold the 20 rounds of BB's but also a CO2 cartridge. So if you already have a Colt Special Combat or you're thinking of getting one, be sure to pickup an extra magazine while you're at it!

Buy this Magazine in Canada

My recently acquired (Thanks UmarexUSA) Umaerx EBOS CO2 BB Machine Gun was just screaming for some add-ons and to be honest the first thing that I noticed was the open sights really needed upgrading. Luckily the rear sight is removable allowing you to mount just about any type of Red Dot Scope or sighting system you want, just make sure it is high enough to see up and over the front BB hopper.

I decided to go with an EOTech Styled Red-Green Dot Tactical Scope and I have to tell you this guns looks awesome with it installed!

I finished off the look with an unobtrusive Tactical Rail Mount Flashlight. All in all I think I spent about as much if not more on accessories for this gun as it is worth to buy :)

Buy BB Rifles in Canada

Buy BB Rifles in the US

Type: CO2 BB Shotgun.
Manufacturer: UmarexUSA.
Model: Walther SG9000.
Materials: Plastic (polymer) and some metal construction.
Weight: 2.35 pounds.
Barrel: 11.5 inches, metal non-rifled.
Propulsion: CO2 x 1 (88 gram).
Action: Semi auto, double action only.
Ammunition Type: 4.5mm BB's
Ammunition Capacity: 40 shot internal spring fed magazine.
FPS: 480 (single shot) - 250 (three shot burst).
Trigger Pull: The trigger pull on the Umarex Walther SG 9000 is in the mid range and is a bit long but once you get used to it you can fire off shots very quickly with little resistance. There really aren't any sticky spots in the trigger pull to speak of.

Accuracy: I shot this CO2 BB Shotgun at a target from the hip 20 feet away using my NcSTAR laser sight I installed on it in a free standing position, and it performed excellent getting a 1.5 inch grouping fairly centered on target. I also performed my accuracy test from 30 feet out in a semi-rested position using my 6x32 NcSTAR Scope and again I got a 1.5 inch grouping proving that a BB gun can show decent accuracy even from further out when setup properly. With my Chrony Chronograph testing I scored much higher then the factory claimed feet per second of 480fps in single shot mode and 250fps in three shot burst mode. I ended up getting an average 8 shot fps in single shot mode of 504fps and 309fps in three shot burst mode!
Build Quality: This is an almost all external polymer air gun with some metal components on the inside giving the Walther SG9000 a bit of a light to medium overall weight but once you add the large 88 gram CO2 cartridge and some accessories this gun can quickly gain a pound or two. All four accessory rails are metal along with the trigger. The fit and finish is very good on the SG9000 and the plastic quality seems very durable.

Realism: The Umarex Walther SG9000 is licensed by Walther but other then a similarity in the pistol grip it doesn't closely look like any specific Walther product or any specific Tactical shotgun for that matter. It does have a very tactical look and with a few accessories added you will have yourself a very persuasive looking shotgun on your hands.
Supplied by UmarexUSA - Can be purchased from: The Replica Airguns Store.

Pros:

• Inexpensive versatile BB shotgun.
• Nothing else really like it out there.
• Multiple shooting modes - singe and three shot burst.
• Uses 88 Gram CO2 so less stopping to change CO2.
• Very good FPS readings - above factory claims.
• Very accurate for a BB gun from close up and further out.
• Lots of rail locations for all kinds of accessories and different customizable looks.
• High capacity 40 round internal magazine.
• Totally fun!

Cons:

• The plastic exterior may put off some people looking for a heavier more metal gun.
• 88 Gram CO2 can be a bit pricy, not as cost effective as 12 gram CO2.
• Trigger pull is kind of long.
• You will need to purchase some sort of a sighting system for it as all you have is a rail on top.

Comments:
The Umarex Walther SG9000 is a really fun and very inexpensive CO2 BB shotgun. With its multiple shooting modes you have the option of power and accuracy in single shot mode or to simply blow stuff away in three shot burst mode. The Walther SG9000 is also very customizable allowing you to really make this Tactical BB shotgun your own by decking it out with just about any combination of add ons and accessories you like! I found this gun the most fun to shoot in three shot burst mode using my laser sight and literally knocking down everything I pointed at!

Watch my YouTube Video Review of the Umarex Walther SG9000 CO2 BB Shotgun:

Buy this gun in Canada   -   Buy this gun in the US

Mil3 sent me some more updated photos of his customized Cybergun Tanfoglio Witness 1911 now with the Sight Rail add on.

Buy this gun in Canada   -   Buy this gun in the US

Type: BB air pistol.

Manufacturer: Umarex.

Model: CP99 Compact Recon Version.

Materials: Metal slide, polymer frame.

Weight: 1.8 pounds.

Barrel: 5 inches, non-rifled.

Propulsion: CO2 x 1.

Action: Semi auto, blowback, single action only.

Ammunition Type: Steel BBs 4.5mm.

Ammunition Capacity: 18 rounds.

FPS: Up to 400.

Trigger Pull: The trigger pull on the Umarex CP99 Compact Recon is amazing, it is short and light making it one of the best action shooters I own. You can fire this gun accurately and fast all day long.

Accuracy: Great! The addition of the Green Dot Scope and slightly longer barrel on the CP99 Compact Recon version work amazingly well, this is one of the most consistent BB shooter I own getting under 2 inch groups at will from 20 feet out.

Build Quality: Excellent, this BB gun is made in Japan and uses metal where it is really needed like in the slide, slide release, safety, trigger, magazine release, magazine and most of the mechanical parts. It's well made, well finished and feels great in the hand.

Realism: This Replica BB gun has many of the same characteristics of the actual 9mm P99 Compact with the exception of having a longer handle and much different safety mechanism. Umarex has even changed the design a bit with the newer CP99 Compacts and made the ejection port cut out adding to the realism of this BB shooter.

Available at: the Replica Airguns Store.

Pros:

• Decent reproduction of the original Walther P99 Compact 9mm.

• Would make an excellent training gun as it has a similar size, weight, and feel to the actual Walther P99 Compact 9mm handgun.

• Blowback action is very firm adding to the realism of shooting this weapon.

• Really good FPS, accuracy and CO2 efficiency for a blowback BB air gun.

• The Recon version has a longer barrel adding a few more FPS to this already great air pistol.

• Amazing light and fast trigger pull making it a blast to shoot.

• Addition of the Sight Rail, Compensator and Green Dot scope really add to the esthetics and performance of this BB pistol.

Cons:

• The Sight Rail, Compensator and most of the Green Dot scope are plastic but this does not seem to effect the performance in any way.

• Safety lever seems out of place and takes away from the realism of this replica.

• Switch on the Green Dot Scope is silver making it stand out from the rest of the all black air gun.

Comments:

I already loved the CP99 Compact non-Recon version so I had very high expectations for this BB gun to be at least as good if not better and I was not disappointed! I was actual surprised at the improvements that the longer barrel and Green Dot Scope made not only in a much higher Feet Per Second rating (about 75 fps), but also the much improved accuracy in what was already a decent shooter. For the additional $40, you get the Sight Rail which allows you to add multiple accessories if required. You get the Green Dot Scope that noticeably improved the accuracy, and you also get the compensator which hides the extra long barrel for more FPS.

Buy BB Pistols in Canada

Buy BB Pistols in the US

I can't help but share some of the photos my happy viewers and customers send me and it seem like the hot item right now is the Cybergun Tanfoglio Witness 1911 CO2 BB Pistol yet again.

These latest photos are brought to you by Mil3 who added rubber grips and an accessory rail to his Tanfoglio Witness 1911. He said the rubber grips only needed some slight carving out on the back side to make them fit.

Buy this gun in Canada   -   Buy this gun in the US

 

I've had a few questions about replacing the gips on the Cybergun Tanfoglio Witness 1911 BB pistol and if it is possible to use standard 1911 wood grips? The answer is yes if you don't mind spending about 15-20 minutes removing just a bit of the wood material in a few spots on the 1911 Wood Grips

Here are the instruction thanks to one of my Customers and viewers Michel:

First of all the holes are in the right place thank god for that! A dremel is the ideal tool youll need, and the whole mod.

1. Mark out the material you want to remove.
2. Remove the material on bottom part of each grip with a dremel using a cicular sandpaper bit.
3. Repeat on other grip .On the top of the grip on the mag release side you might have to remove material to clear pin.

After on the other side of the mag release button make sure there is enough clearance for when you depress the button.

Here are a few pictures of the mod. Have fun:

Buy this gun in Canada   -   Buy this gun in the US

I've written a few posts on the Umarex Walther CP99 Compact. It was even featured in my very first YouTube video with my Umarex Walther PPK Full Auto BB Pistol. I do sell the CP99 Compact in my web-store but not the regular version, rather the Recon version. With the Recon version you get a few extras: The Sight Rail, a Red Dot Scope and a Compensator extension which I feel is better value over the standard version.

One thing that I noticed about the Compensator extension is that it's not just an add on simply for looks, this Recon version of the CP99 Compact has a longer barrel inside the compensator which should give the Recon version of the CP99 Compact a bit higher FPS. I will test this theory down the road with my Chrony Chronograph.

Enjoy the picture for now...

Buy this gun in Canada   -   Buy similar gun in the US