A while back I made a full Table Top Review and Field Test Shooting Review for my sample - pre-production KWC Mauser M712 Broomhandle CO2 Blowback Airsoft Pistol. Well we finally got the finished product in our Canada Replica Airguns Store and not only in the 6mm Airsoft version but also the 4.5mm Steel BB versions!
I most likely will not be doing another table top review for the KWC Mauser M712 Broomhandle CO2 Blowback BB and Airsoft Pistol since I already made a fairly comprehensive Table Top Review of my sample - pre-production Airsoft unit. The only real difference I could find visually is the markings on the left side of the receiver indicating the pistol is made by KWC in Taiwan and the Caliber it shoots.
I will however be making a side by side Field Test Shooting Comparison Video to see if the production Airsoft version shoots the same as my pre-production model and also how the 4.5mm steel BB version compares in terms of fps and accuracy side by side.
We also have magazines for both of these KWC pistols in our Canada Store!
Materials: Mostly metal with some plastic construction.
Weight: 2 pounds (900 grams).
Barrel: 2.25 inches, non-rifled.
Propulsion: 12 gram CO2.
Action: Revolver, single & double actions.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 6 rounds.
FPS: 360+.
Trigger Pull: The trigger pull on the KWC 357 2.5 Inch CO2 Airsoft Revolver is good in both single and double action, even better than the Dan Wesson and S&W 327 TRR8 shell loading revolvers, most likely because the spring tension that pushes the inner barrel to make contact with the cylinder is noticeably lighter on the KWC 357's. Even the hammer is smoother and has less wiggle, just a better trigger and hammer mechanism overall.
Accuracy: This is yet to be determined but I did notice on the KWC Airsoft versions of their shell loading Airsoft Revolvers, that they do have a built in preset Hop-up by way of a small rubber bar that goes along the top of the barrel just inside the rear portion. This will create some backspin which will keep the Airsoft BB's trajectory more level but should also help them stay more accurate in general as compared to a plastic Airsoft BB that is not spinning but rather just floating through the air.
Build Quality: The KWC 357 2.5 Inch CO2 Airsoft Revolver being mostly metal has a very good build quality, perhaps even better than the Dan Wesson and S&W 327 TRR8 shell loading revolvers, even the weight of the KWC 357 is noticeably more! The only real plastic or rubber I could find was in the grips and the shell tips. Fit and finish was also good with no noticeable wear or sloppy workmanship.
Realism: The KWC 357 2.5 Inch CO2 Airsoft Revolver overall is a close copy a the real steel 357 styled revolver. I did notice the rear portion of the receiver (between the rear cylinder and hammer) to be a bit longer perhaps to accommodate the CO2 valve length, but other than that this pistol is super close to the original 357 styled revolver it is based on. Again being all metal gives this CO2 Airsoft revolver very realistic weight and feel and the loadable brass shells make using this gun almost exactly like using a real shell loading revolver but for much less cost per shot and of course a lot less recoil on the hands that a real 357 magnum or even when shooting 38 special shells for that matter ;)
Pretty all the parts work as they would in a similar real steel revolver of this type.
Good overall weight, Very dense because of the shorter barrel.
Should have good overall power, accuracy and shots per CO2 (based on Colt Python testing).
Fully adjustable rear sight for windage and elevation.
Well hidden CO2 Screw.
Recessed barrel.
Not much white writing on the gun.
Nice easy Trigger pull in both single and double action.
Cons:
Short 2.25 inch barrel will rob power but the Dan Wesson style long barrel Airsoft revolvers are know to be a bit hot for some Airsoft games so this may be a good thing.
Grips may be a bit large for people with small hands.
All black sights with no white dots are not great on dark backgrounds or low lighting.
Comments:
The KWC 357 2.5 Inch CO2 Airsoft Revolver is yet another addition to the increasing lineup of shell loading revolvers available today in both Steel BB and Airsoft versions. The 2.5 inch reviewed here is meant to be the compact version with its snub nosed barrel but I would have to say it is not a small gun at all coming in at 2 pounds and with rather large grips and a pretty large cylinder to pack around. But then again, that may be just what you are looking for? The shorter barrel will lower the fps a bit which may bring it back in line with the requirements of some Airsoft fields and the addition of the built in preset Hop-up, this pistol should shoot pretty well out at medium and even longer ranges.
My Vimeo Table Top Review for the KWC 357 2.5 Inch CO2 Airsoft Revolver:
Action: Semi auto blowback, double and single action.
Ammunition Type: Airsoft 6mm plastic BB's.
Ammunition Capacity: 25 rounds
FPS: 390
Trigger Pull: The trigger pull on the KWC Model 226-S5 Sig Sauer CO2 Blowback Airsoft Pistol is what you would expect from a blowback pistol with true single action capability. nice and light with a short take-up in single action and also decent when shooting in double action which for the most part you will not be doing since the blowback pre-cocks the hammer for single action shooting.
Build Quality: Very good, pretty much an all metal construction, good weight and craftsmanship, slide wiggle is minimal, fit and finish is good. As with many of the KWC airguns that use an electromagnetic powder coating, the finish looks great but is thin so it does wear off on the high posts and where metal on metal movement takes place.
Realism: Compared to the real steel Sig Sauer X-Five, the KWC version is pretty close, although it does have a bit different looking slide in terms of the groves or slide serration's, and of course there is no Sig Sauer licensing on the KWC version. You also do not get the ugly white warning instructions so there is a bit of a trade off here and the KWC version also comes with a fully adjustable rear sight which is nice if your aim point is off a bit. Over all the KWC Model 226-S5 Sig Sauer CO2 Blowback Airsoft Pistol is super realistic with its full blowback operation, full size drop out metal magazine and ability to filed strip just like the real steel Sig Sauer it replicates.
All metal construction - Extremely good weight and solid feeling gun. As real as you can get.
Heavy blowback action.
Accurate X-five replica without the Sig Licensing or white warning instructions.
Awesome training gun.
Both SA & DA with excellent trigger pull, very smooth and light.
Has the fully adjustable rear sight for windage and elevation.
Nice high capacity full size drop out metal magazine.
Fully field strippable.
Cons:
Top loading magazine only.
Sacrifice some fps and shots per CO2 because of the heavy blowback but worth it.
Finish is prone to wear on the high spots and metal on metal areas
Comments:
I am really looking forward to my Field Test Shooting video for this Airsoft pistol, the KWC Model 226-S5 Sig Sauer is a nice big heavy pistol with lots of blowback, right up my alley! I am hoping the hop-up will keep this gun in the same accuracy zone as the 4.5mm Cybergun X-Five version, I may just have to test them head to head to find out? If you're a Sig Sauer fan like me, and require a solid useable Airsoft pistol for gaming or just plinking, the KWC Model 226-S5 Sig Sauer CO2 Blowback Airsoft Pistol should do the job well and at a price point that is very reasonable.
My Vimeo Videos for the KWC Model 226-S5 Sig Sauer CO2 Blowback Airsoft Pistol:
Some more CO2 pistols I will be doing Table Top and Field Test video reviews for in the near future. Some of them I have already reviewed in different caliber versions, either 4.5mm Steel BB or 6mm Plastic Airsoft.
From KWC I show off two revolvers styled after the 357 and if you watched my Umarex Colt Python 357 Review then you will notice the similarities between these KWC made revolvers since they are all made by KWC. The Model 357 6 inch version is finished in Chrome and made to shoot 4.5mm Steel BB's while the KWC Model 357 2.5 inch shoots 6mm Plastic BB's and is in all black. At this time I do not have these KWC revolver listed in the Replica Airguns Canada Store but should have them listed fairly soon...
While the weather is still holding on, I setup some clay pigeon targets at varying further out distances than the typically 30 feet I shoot on my deck. I paced out approximately 40-60-80-100+ foot ranges conservatively thinking this would be a good test to see if a 6mm Airsoft rifle could effectively hit targets at any of these ranges using heavy .36 gram Airsoft BB's.
So today I brought out an Airsoft Sniper rifle since this is what it's made to do, the model being the ASG AW .308 Airsoft Sniper. As with many of my shooting videos I captured all the fun using a bunch of different cameras and camera angles along with a dedicated lapel microphone so the audio also comes in nice and clear.
So make sure to watch my YouTube video and see how the ASG AW .308 Airsoft Sniper Rifle does shooting clay pigeons up to 100 Plus feet away...
I often get asked about using a 4.5mm Steel BB gun for pest control and to be honest I really don't think a BB gun is the right tool even at close range to properly and humanly take care of pests when need be. A much better tool is a high powered pellet rifle in just about any caliber as long as you have taken the time to practice your shot placement at a variety of ranges.
Pellets on the other hand, since they are shot out of a rifled barrel are generally super accurate, even within an inch or so at long ranges. Steel BB's on the other hand will do OK within 20-30 feet but once they get to the farther out ranges, they tend to drift a lot, making it very hard to predict exactly where they are going to go...
So I thought I would back up my words with a real world test by taking an average mid priced BB rifle and taking aim at some clay pigeon targets setup about 100 feet away. Watch my YouTube video to see how my Umarex Steel Force did shooting in semi auto at 100+ feet out.
Perhaps the last of my 4.5mm Steel BB Dull Auto Fun Video? We'll see? Today I take out my Umarex EBOS (Electric Burst of Steel) 8 Round Burst BB Machine Gun and again take aim at a bunch of clay pigeons I set up 30 feet away. Even thought the EBOS does not have the highest rate of fire with only 500 rounds per minute, it does get the job done because it stays true on target and really proved to be very accurate allowing me to even trim off the smallest bits of clay pigeon stuck in the edges of the holders.
The rate of fire on the Umarex E.B.O.S. almost reminds me of what you would hear or expect from an AK 47 type machine gun.
Near the end of this video I try my luck at shooting some of the clay pigeons out of the air shotgun style but failed horribly :( Perhaps I should give by modified 1200 rounds per minute Drozd Blackbird a go at it :)
Only a few more Full Auto Fun Videos left to do for you, todays features the Umarex Steel Force which is basically an updated version of the Steel Storm but instead of having an H&K styled outer shell, the Steel Force is based around the popular AR 15 series and like many modern AR 15's, the Steel Force has an adjustable stock which really helps with target acquisition and accuracy.
Like my other Full Auto Fun Videos, I take out a bunch of clay pigeons from about 30 feet away. The Umarex Steel Force proves to be very accurate and CO2 efficient (got about 300 shots from the pair of 12 gram CO2's) but is a bit of a pain to reload the spring fed 30 rounds magazine when the 300 round BB hopper is full.
All in all if you'er looking for a low cost and super fun BB machine gun with a high rate of fire, good CO2 efficiency, awesome pinpoint accuracy and pretty decent power, then pick yourself up one of our Umarex Steel Force BB Guns!
The good news is that out of the box the KWC Mini UZI and KWC M92 both shoot in selectable semi auto and full auto modes. And if you didn't already know, the KWC versions are virtually the same guns since KWC makes them for Cybergun. The only real difference being the KWC version does not have the licensing or white lettering on the BB guns and of course the KWC versions are full auto ready to go.
Alright, so todays Full Auto Fun Video may be stretching things just a bit but I figured that since my Umarex Walther SG 9000 does have the ability to shoot 3 rounds with each pull of the trigger that we'll give it the benefit of the doubt and include it in this round of Full Auto Fun Videos.
The Walther SG 9000 is a kind of different looking airgun, the back half looks like a Walther Pistol while the front half is more of a tactical styled shotgun. And like a shotgun you can shoot multiple BB's with one shot. You actually have teh option of shooting single shot or three shot burst. In single shot mode, the Walther SG 9000 is pretty peppy shooting at around 500 fps on a fresh and warm 88 gram CO2. When you switch the SG 9000 over to three shot burst mode, it does slowdown somewhat closer to the 250 fps range so not really that great for any serious penetration.
But I figured since I was shooting clay pigeons which are made for shotgun use, why not use a BB styled multi-round shotgun on some of them! All in all the Umarex Walther SG 9000 got the job done...
I am sad to say that Umarex does not seem to make the Walther SG 9000 anymore so if you're looking for one you may have to settle for a used on if you can find an owner willing to give it up.
Today's Full Auto Fun Video features the Umarex Steel Storm CO2 (Internal) Blowback Semi Auto and 6 Round Burst BB Gun. In my books any gun that can shoot at least 3-6 rounds for every pull of the trigger is full auto in my opinion. I tend to shoot in short bursts even if the gun is truly full auto since holding the trigger down till the mag is empty just means you have a lot of down time reloading on your hands. I prefer short controlled bursts because they are more accurate and you can make corrections if need be. You also use less CO2 giving the gun and CO2 a chance to warm up a bit between bursts.
The Umarex Steel Storm has been in my collection of a while now and was the first out of the box full auto BB gun I reviewed on my YouTube Channel. Version 2 of the Steel Storm is the Steel Force which shares many mechanical attributes to the Steel Storm but the Steel Force (externally) is modeled after the AR platform and has the addition of a multi-position AR styled stock which does help with target hold and accuracy.
I will be shooting the Steel Force in an upcoming Full Auto Fun Video so stay posted for that one!
Yes! More Full Auto Fun Videos on the way and to kick of this week I shoot my ZMZ Tyrex PPA-K-01 Full Auto BB Gun. If you're not aware of the background on this very hard to get ahold of Airgun, I bought it new from another collector and imported it into Canada. I Paid an arm and a leg for it because the Tyrex PPA-K-01 is really hard to find here in Canada and the US, new or used.
The ZMZ Tyrex PPA-K-01 is a super close copy of the Kedr PP-91 (9 x 18 mm Makarov), also made in the same Russian ZMZ factory. So like my Baikal Makarov, the BB version and real steel version are made side by side and both guns use weapons grade steel and some parts from the real guns. Nothing of course that could be converted to a real gun.
As with my other Full Auto Fun Videos, I shoot up a bunch of clay pigeons and record all the fun using several cameras from several angles and points of view. The ZMZ Tyrex PPA-K-01 Blowback CO2 Full Auto BB Gun has a very high rate of fire and sounds like a real machine gun but much quieter of course. It is also surprisingly accurate as you will see in this Full Auto Fun Video!
You guessed it, another Full Auto Fun YouTube Video! And another great Blowback BB gun from the past dusted off and brought out for some more shooting fun :)
With that said this video is me actually shooting my original Cybergun / KWC Licensed GSG 92 version that I modded to shoot full auto. It was giving me a bit of trouble today but it seemed to work out the kinks near the end.
In an upcoming Full Auto Fun Video I do plan to bring out a new KWC full auto ready M92 and Mini UZI to see how these factory full auto 4.5mm BB guns shoot out of the box.
I do have to say, modifying the PPK to Full Auto is not recommended, mine originally worked well but the heavy blowback in full auto eventually broke the firing pin setup and I lost it somewhere in my back field. I had to Macgyver a bolt in place to kind of work but now my Full Auto Modded PPK shoots out of control, what I mean by this is when I press the trigger, it does not stop shooting until all the BB's are gone. Safe, I don't think so!
My suggestion is to leave the Umarex Walther PPK as is, it truly is a an awesome CO2 Blowback BB replica with some really decent blowback recoil in a small airgun.
Full Auto Fun video number three this week and this one is perhaps the craziest one! When you take a Drozd Blackbird that already has a 800-1000 round BB magazine, convert it to 1200 rounds of full auto, add a custom JimC Barrel to it, some bulk CO2 and a bunch of other cosmetic accessories... Well you get the most ridiculous full auto BB gun you can ask for.
Since I had an extra 800-900 BB's more than I am used to when making these full auto videos, I decided to add a few additional targets over and above the clay pigeons I have been using so far. I picked up a nice fairly heavy gauge Santa tin and a rather solid hard wax candle from the dollar store that proved to add some drama to this Full Auto Fun video!
Make sure to also watch my first two Full Auto Fun videos:
If you like what you see in this video and want an absolutely crazy BB gun, then checkout our Replica Airguns Store where we Sell the Drozd BB gun and some add ons for it!
In this "Full Auto Fun" video I bring out my RAP4 - RAP5 MP5 Full auto BB Rifle. The RAP5 MP5 started out life as a .43 caliber paintball gun but I bought it converted in the factory to 4.5mm Steel BB. RAP4 converts it by adding a barrel sleeve adaptor and includes some plastic casings that allow you to place 4.5mm Steel BB's into a kind of donut shaped shell that is then placed into the 21 round magazines. The plastic Donut BB shells eject from the gun like a real shell casing which is super cool!
Like my KWC Mini UZI Full Auto Fun video, I shoot up a bunch of clay pigeons but this time using my RAP4 - RAP5 MP5 4.5mm Steel BB Full Auto Rifle which I found to be very accurate but perhaps a bit thirsty when it comes to CO2 usage. Some bulk air would be a nice combination with this BB shooter, maybe in another video...
This "Full Auto Fun" video focuses on my KWC/Cybergun 4.5mm Steel BB CO2 Blowback Mini UZI BB Gun, where I kick of a short series based around shooting a bunch of 4.5mm Steel BB machine guns! Sounds like fun cause it is fun!
This KWC/Cybergun Blowback Mini UZI comes in a variety of versions, 4.5mm Steel BB and Airsoft versions, it also comes in RWS and KWC Distributed models.
In this video I basically shoot a bunch of clay pigeons positioned in various locations and film it using 4 different camera angles to spice things up a bit.
I also mention some upcoming videos where I will be shooting my RAP4 MP5 and Baikal Drozd Blackbird Full Auto BB guns so make sure to watch those video when I upload them later on this week!
Make sure to also checkout my full Table Top Review where you will find more details and specifications for the KWC Luger P-08 Airsoft replica pistol which is virtually the same gun as the 4.5mm BB version with the only real difference being the ammo type and the amount of rounds per magazine (21 rounds for the 4.5mm BB version and 15 rounds for the 6mm Airsoft version).
Basically in this YouTube video, I shoot the 4.5mm Steel BB version of the KWC P-08 Luger head to head against the Airsoft Version to see how they compare in terms of Feet Per Second speed and Accuracy from30 feet away from a paper target using a semi rested shooting stance. As expected the heavier 4.5mm Steel BB's shot a bit slower but did seem to have a slight advantage in the accuracy department.
Watch my YouTube Field Test Head to Head Shooting video of the KWC Luger P-08 CO2 Blowback Replica Pistols to see how they both compared:
Great news, we just received our shipment of KWC P-08 Luger CO2 Blowback Pistols and yes we have them in both 4.5mm Steel BB and 6mm Plastic Airsoft so this news should make everyone very happy!
The KWC Mauser is still a bit of a ways off since it was still a sample product when I tested it.
So make sure to pick yours up ASAP before we sell out of them as we have limited supplies and if you haven't already watched my Table Top Video and Field Test Video for the KWC P-08 Luger then make sure to do so.
I like shooting 1911 styled pistols, the KJWorks KP-06 1911 HI-CAPA Blowback Airsoft Pistol is no exception, it's a bit beefier in terms of overall size and even handle grip thickness but held well for me.
So let's get right to the test results! I started off by shooting 5 rounds through my Chronograph using a brand new CO2 along with .25 gram plastic Airsoft BB's. My 5 shot average velocity was 329 fps and the temperature on this day was not too warm, perhaps around 15-18 Celsius. So on a warmer day you can expect to get higher fps out of the KJWorks KP-06 Airsoft Pistol.
Moving on to the Target accuracy performance, I shot 10 .25 gram rounds using the KJWorks KP-06 from a 30 foot distance using a semi rested position (Sand bag in the front, standing in the back). I was able to place the bulk of the shots within a 1.5 inch group but one shot came out extending the group to about 2 inches. Overall the placement was fairly well centered on target, just a hair to the right but one could easily adjust the green dot sights for both windage and/or elevation as required.
The single action 1911 type trigger is exactly what you would expect from a 1911, short, light and crisp. The blowback action is very solid and this pistol settles down after each shot very quickly. If you don't mind a 1911 styled Airsoft pistol with a bit bulkier size than the KJWorks KP-06 1911 HI-CAPA may just make a good choice.
