We have a few ROHM (RÖHM) RG-88 9mm P.A.K. Front Firing Blank Pistol we juts got in stock but supplies are very limited so grab one while you can...
Enough said, here are some more photos:
Buy the ROHM RG-88 9mm P.A.K. Blank Pistol in the Canada Store
Type: Airsoft Assault Rifle.
Model:HK G36 KV.
Materials: Metal & polymer.
Weight: 7 pounds.
Barrel: Smooth bore.
Propulsion: AEG (EBB) Blowback.
Action: Semi & full auto.
Ammunition Type: Airsoft 6mm Plastic BB's.
Ammunition Capacity: 400 rounds.
FPS: 450+.
Trigger Pull: The trigger pull on the Umarex HK G36 KVis fairly short and light as it is essentially just an electrical on off switch for the internal electronic components. You can shoot the G36 very quickly in semi auto mode, and in full auto it cycles very quickly giving a high rate of fire.
Accuracy: In my brief pre-testing without any sighting in, the Umarex Heckler & Koch G36 KV shot just a bit off center to the right from a 30 foot semi rested position and produced a nice 2 inch grouping. In full auto the grouping opened up a bit but still punched a nice 1.5 inch hole in the target with most of the BB hitting there.
Build Quality: The Umarex HK G36 KV is very well made, yes it has lots of polymer but so does the real version and the plastic seems very durable, the fit and finish looked great and there is a lot of metal in and around the G36 where it would be on the real steel gun and where it is really required to be. Like the trigger, top rail, pins, selector switch, barrel, gearbox and gears.
Realism: Similar to my WE G39C reviewed earlier, I bet if you had a real Heckler & Koch G36 sitting beside the Umarex HK G36 KV, you would be hard pressed to tell them apart? The Umarex is also fully HK licensed and trademark throughout even including the 5.56mm NATO markings.
Available at the: Canada Replica Airguns Store.
Pros:
Excellent attention to detail with lots of working parts.
All metal internals and metal external mechanical parts.
Semi auto & full auto selectable.
Full HK licensing and markings.
Accurate 2 inch 10 shot group from 30 feet out.
Nice high 450+ FPS.
Full ambidextrous, even the charging handle can be switched side to side.
High capacity magazine (400 rounds)
Built in 3x optical sight with ability to add a Red Dot for close quarter shooting.
4 position adjustable folding stock.
Easy access to hop up system.
Cons:
Does not come with a battery or charger.
Came with the orange tip, you may want to replace it or paint it black?
May be too powerful for close quarter skirmishes without some detuning.
Comments:
This is my first Umarex Airsoft rifle product review and I have to say it really seems good so far, I have not had a lot of hands on time shooting the Umarex HK G36 KV but right out of the box I was getting very good results, nice high 450+ fps and good groupings even out at further range. The fit and finish are all very good and the realism is as good, if not better than other Airsoft AEG I have reviewed. I like the built in 3x Optical Scope and the addition of an upper rail to accommodate a Red Dot, this gives you the ability to acquire quick close up shot placements using a Red Dot while also being able to focus in on further out targets using the magnified optical scope. I look forward to my official Field Test shooting review.
What goes perfectly with guns and ammo... Flashlights! If you can't see it you cant' shoot it!
I wanted to bring to everyones attention the Fenix line of flashlights we will shortly be bringing to the Canada Replica Airguns store. These lights are high quality yet very well priced so make sure to check back in a bit for the addition of the Fenix Flashlights to the Replica Airguns Store.
The Fenix models I show off in the YouTube video are the TK45 -TK15 - LD22 - PD22, a rather nice selection that should cover most lighting requirements.
Some Features and Benefits of Fenix Flashlights:
Fenix TK45:
Fenix TK15:
Fenix LD22:
Fenix PD22:
Make sure to watch my YouTube Video Preview on the Fenix line of Flashlights:
Sometimes we all get caught up in which gun is brand new and has the most realistic features. I wanted to put the focus back on a few high quality German made Umarex Airguns that where designed from the ground up to be very good replicas but also take into consideration that yes, they are airguns and so they should be designed to operate like an airgun and have excellent build quality, and performance. Quality and performance sometimes gets sacrificed on newer guns that just go after realism and can sacrifice form over function.
Sure these German made Umarex air pistols are not cheap, but hold one in your hand and shoot it and you will quickly see that they are built to last a lifetime, these guns are an investment!
I have already reviewed the Colt Government 1911 A1 (Satin version), I wanted to also show you how it looks in the all black model. Two other Umarex German made guns I have been asked often to review are the Walther CP99 and Smith & Wesson 586/686 Revolvers. I am happy to inform you that I have these guns on hand and will be reviewing them shortly for you.
You can watch my Update video to see a bit of a preview of these very fine German made Umarex pellet shooters:
We where out of stock for a bit but now we have some more ROHM (RÖHM) RG-56 Blank Revolvers back in stock (Limited Supplies!)
These are the 7 shot .22 caliber blank front firing versions, very high German quality, come in a nice presentation box and include the flare adaptor! Grab yours before they are gone again...
Some of you may have noticed I have not been making any videos or posting any new articles for the last few weeks, that's cause I took some time off to take a break from work and spend some time with my family while on Vacation in beautiful Maui!
The party is over so to speak and I am back at it and to be honest I kind of missed my "real life" a bit!
The really good news is that I have made a few changes here at Replica Airguns that not only allowed me the time off to take a break and go on a bit of an extended vacation but will now allow me to get back to what started this all off, making videos and interacting with my social network fans :)
So stay posted for even more videos, articles and posts then before!
And don't forget to stick around and watch my YouTube Video I put together for all of you to see some of the fun stuff I did with my Family while on vacation in Maui...
Type: Airsoft AEG.
Manufacturer: Bolt Airsoft.
Model:B4A1 with BRRS (Bolt Recoil Shock System).
Materials: Metal & Nylon.
Weight: 6 pounds.
Barrel: 15 inches, metal.
Propulsion: AEG with BRSS
Action: Semi/full auto, single action.
Ammunition Type: 6mm Plastic Airsoft BB (recommended .20 gram plus).
Ammunition Capacity: 300+ round magazine.
FPS: 366-400.
Trigger Pull: The trigger pull on the Bolt Airsoft B4A1 is fairly short and light as it is essentially just an on off switch for the internal electronic components. You can shoot this gun very quickly in semi auto mode, and of course in full auto when full auto position is selected. As is with all AEG rifles there is a bit of a delay while the spring is retracted and released, this is not as noticeable in full auto.
Accuracy: I tested the B4A1 Airsoft rifle by putting around 10 rounds into a target from 30 feet with .36 gram Airsoft 6mm BB's while using a semi rested position (sand bag in the front - standing in the rear). I used a non-magnified red dot scope for this test rather than using the built in iron sights. I got very good result in semi auto and even with the recoil making my sights jump around a bit in full auto still stayed well centered on target and got about a 1.5 inch group in both semi and full auto. My chronograph testing with lighter .20 gram BB's resulted in a 421 fps 5 shot average.
Build Quality: The Bolt Airsoft B4A1 Metal AEG Carbine is very well made with a full Metal upper and lower receiver, along with metal and polymer parts exactly where they would be on the real steel version of an actual Colt M4. The only plastic or nylon components are the stocks and the grips and perhaps some internal parts. I found the adjustable stock and magazine tolerance to be tighter than my King Arms M4A1 I previously reviewed which showed the Bolt B4A1 had a bit higher quality in the workmanship, for the most part the fit and finish was very good!
Realism: As with many Airsoft guns, there is great attention to realism and the Bolt Airsoft BRSS B4A1 Carbine is another great example of an Airsoft Carbine based on the Colt M4 platform. It is an AEG but because of the BRSS (Bolt Recoil Shock System) you get a very nice compromise between a conventional AEG and a GBB (Gas Blow Back Airsoft) gun. In other words, like a standard AEG I get that endless stream of consistent BB's flying down range on target but unlike a true Gas Blow Back Airsoft gun, I don't get that drop off in power and limitation to about 30 usable rounds per magazine . What I do get similar to a GBB is that recoil action that helps make the shooting experience so much more believable! Even the sound from the Bolt B4A1 is much snapper than a standard AEG and more like a GBB. I also like the fact that the charging handle and forward assist work similarly to a real M4 and also the dust cover cleverly exposes the bolt and internal hop-up for easy adjustment along with the bolt cycling just like a GBB rifle would cycle which is similar to a real steel M4.
Purchased From: The Replica Airguns Store.
Pros:
Great attention to detail with lots of working parts.
All Metal upper and lower receiver, lots of metal parts throughout.
Semi auto & full auto selectable.
High capacity 300+ round magazine.
Removable carry handle with Weaver/Picatinny rail underneath.
Nice high 420 real FPS.
Extremely accurate for plastic BB's.
Fully adjustable sights with two position Peep sights.
6 position adjustable stock.
Easy access to internal hop-up system.
Realistic Blowback Recoil system (BRSS) for a very believable shooting experience!
Cons:
May not get off as many shots per battery charge as a traditional AEG because of the Bolt Recoil Shock System.
Does not come with battery or charger but most higher end AEG's also do not.
Not yet readily available in Canada, maybe we can change that :)
Comments:
The Bolt Airsoft B4A1 Blowback Airsoft Carbine is a great compromise for the avid Airsofter looking for a practical skirmish weapon, but also craving the realistic experience of having blowback with recoil which up until now was really only provided by Gas Blow Back systems. I really like this concept and find it great fun to shoot even if its just for plinking in the yard. The overall quality is very good and you just have to love the M4 platform it's based on. If you're into customizing you can mix and match many external and internal parts with other existing Airsoft mechanical parts and I would imagine real steel accessories. I like mine as is with my addition of a riser and Red Dot and if I every get a chance to get out for a skirmish this will be my weapon of choice for sure!
This post has nothing to do with guns but it is for a really good cause. I'm growing my mustache during the month of November for the "Movember Cause". I have also donated $100 that goes towards Mens Health focusing mainly on Prostate Cancer and Mens Mental Health.
I encourage everyone to join me on this journey and if you can grow a stache - go for it, please also throw a little love in the form of a small or large donation, I have setup a "Movember" Team where we can all pool our donations together and see how much money we can donate to this very worthwhile cause!
Here is the direct link to my ReplicaAirguns Movember Team Sponsor Page:
I got a few sample products I wanted to quickly share with everyone :) First off Bolt Airsoft, a Taiwanese based company, sent me one of their B4A1 (M4A1 Copy) AEG Airsoft rifles featuring BRSS - (Bolt Recoil Shock System) which has Blowback with simulated recoil.
The Bolt B4A1 is designed after the M4A1 and looks and works like most AEG Airsoft rifles giving you sustained performance and the use of high capacity magazines but Bolt has added their BRSS - (Bolt Recoil Shock System) which gives you the feedback and recoil you would normally only get with a true GBB (Gas Blow Back) Airsoft gun.
I will be doing a full review very shortly so watch for it!
I also received from ASG (Action Sport Games) a few Mock Airsoft Suppressors, all of them are B&T (Brügger & Thomet) derivatives. It was nice that they sent me the version (MP9 QD) that fits perfectly on my ASG/KWA MP9. The other tow are the ROTEX-IIIA and ROTEX-IIIA Compact that fit perfectly on to a standard flash hider and even include one with them.
Check out my Vimeo Preview Video of these Review items from Bolt Airsoft and ASG:
And the winner of this years Best Halloween Costume Contest is YouTuber mp032. Congratulation on your great costume and very creative and well done video.
I will be sending him a Replica Airguns Coupon Code worth $100!
Thanks Again to everyone who took the time to submit their Best Halloween Costume Contest video! Check them out if you have not done so yet.
As with most new items I pickup, I like to share them with everyone. I am checking into some more ROHM blank guns, an RG-59 and RG-88, the RG-59 is a lot like the ROHM RG-56 .22 caliber blank revolver I sell in the Canada Replica Airguns Store but in .380 caliber and the one I show off here is a 5 shot two-tone model. Other than that they use the same frame and mechanical parts throughout.
I also received a black/blued ROHM RG-88 which is kind of like a Walther PPK in design, it field strips the same, has a similar safety setup and even has a similar size and look to it although it is definitely not a replica of a Walther PPK. I am impressed with the overall quality of the ROHM blank guns, material used, fit and finish is very good.
Lastly, I acquired a pre-owned Umarex CP99 CO2 Pellet Pistol from a customer of mine. It is in pretty much in new condition and is one of the Umarex guns I was missing in my collection and have been looking to add. The Umarex CP99 is a pretty good replica of the Walther P99 and uses the standard Umarex metal 8 shot rotary magazines and shares the same CO2 grip fed magazine as the CPSport. The CP99 is German made so it's not one of the lower cost Umarex pistols out there but you do get what you pay for ;)
Type: Airsoft Machine Pistol.
Manufacturer:ASG.
Model: ASG/KWC MP9 A3.
Materials: Metal & plastic.
Weight: 3.9 pounds.
Barrel: 5.5 inches, smooth bore.
Propulsion: GBB - Gas Blowback.
Action: Semi-full auto selectable SAO.
Ammunition Type: Airsoft 6mm Plastic BB's.
Ammunition Capacity: 48 rounds.
FPS: Up-to 375.
Trigger Pull: The trigger pull on the ASG/KWC MP9 A3 is single action only as the charging handle has to be pulled back to open and release the bolt for the first shot. There is a trigger safety but it is not noticeable when shooting this Airsoft machine gun. There is a short take-up and then a light release and short reset.
Accuracy: Right away I put my NcSTAR 1x25 Red Dot sight on the ASG/KWC MP9 A3 as it was a perfect fit for this small and compact machine pistol, it did not take long to sight it in and I was able to get decent accuracy in both semi auto and full auto burst due to the mild but very fast cycle rate. I was able to get a 2 inch grouping at 30 feet out using a rested position. In full auto mode the grouping did not really get too much wider. I also got between 350 and 370 fps when testing the ASG MP9 on my Chronograph.
Build Quality: The ASG/KWC MP9 A3 Airsoft Machine Pistol is built very well, using similar components that you would find on the real steel version so yes it has a plastic shell but that is to be expected. The ASG/KWC MP9 A3 does use lots of metal where it needs to be like in the internal parts, pins, bolt, barrel, rails and even the magazine. The fit and finish is near perfect!
Realism: I have to say the ASG/KWC MP9 A3 is pretty much a bang on copy of the real steel Brügger & Thomet MP9 A3. The only telltale sign is the ASG branding on the right side along with the 6mm caliber beside the ASG logo. One other small detail is the magazine which is metal on the Airsoft version where as you would find the real version uses a transparent polymer magazine.
Available at the:Canada Replica Airguns Store.
Pros:
Extremely fun to shoot and it sounds awesome!
Rate of fire is very fast and does not slow down much even when the gas is running low.
Good overall power for a short barreled gas blowback gun.
Very nice trigger with working trigger safety.
Excellent replica of the real steel version in just about every way.
Can add a lot of gear and make this gun your own.
Decent price for all you get out of the ASG MP9!
Cons:
Bolt didn't lock back for me when the gun got really cold?
Real magazine would actually be transparent polymer.
Comments:
I really like the ASG/KWC MP9 A3! I love the look, I love the features and the price is also really good for what you are getting. I was really impressed with the super high cycle rate and because of the small low weight bolt the gun does not move around too much or slow down in rounds per minute even when you do a full mag dump. There is however just enough blowback recoil to give you that GBB realistic feel! I also found that the magazine holds a lot of gas so it is possible to get two magazine worth of shots out of a single fill, that's around 100 shots. I also like how easy it is to add to the ASG/KWC MP9 A3, I had mine pimped out and looking amazing right away and suggest if you get one you do the same :)
My Vimeo Video of the ASG/KWC MP9 A3 Airsoft Machine Pistol:
For my Canadian Blank Gun collectors, I'm not going to list these ones as Silent Auction items this time around so if you're looking for an EKOL blank gun, I have one of each of the following versions for sale:
Act fast if you want one!
Buy EKOL ASI Full Auto Machine Blank Gun in Canada
This one has to be the coolest Machine Pistols out there!
Buy the ASG MP9 A3 in Canada - Buy similar Airsoft Gun in the US
Now the Thompson 1928 Tommy Gun has some company!
Buy this Airsoft Rifle in Canada - Buy similar Airsoft Rifles in the US
It's that time of year again, when you can actually take your Airgun or Airsoft gun with you to a party (private house party of course). So once again I'm having a Halloween Costume Contest and like last year your costume should revolve around a weapon of some sort. That weapon could be a gun, knife, bat, axe or what have you...
You will need to upload your video as a response to my YouTube video for this contest before the end of day on October 31st. I will check them all out and pick my favorite as the winner. The prize portion of the contest can only go to a Canada or US customer as my Replica Airguns Store only ships within North America but everyone is welcome to upload their costume video.
$100 to the winner - so good luck and may the best costume win!
By the way, the winner of my last giveaway (10,000,000 Video Views) was Charles P with order number 20127595. Charles will be receiving a coupon code worth $211.30 which is the total value of his order.
Type: Airsoft Assault Rifle.
Manufacturer:WE.
Model: G39C.
Materials: Metal & plastic.
Weight: 6.1 pounds.
Barrel: 9.5 inches, smooth bore.
Propulsion: (GBB) Gas Blowback.
Action: Semi & full auto.
Ammunition Type: Airsoft 6mm Plastic BB's.
Ammunition Capacity: 32 rounds.
FPS: Up-to 420.
Trigger Pull: The trigger pull on the WE G39C is about what you would expect from a Single action only Semi Auto rifle, it has a very slight take up and then about a 4 pound trigger pull that is crisp and smooth.
Accuracy: Out of the Box the WE G39C shot great up close and farther out, the hop-up seemed to be already dialed in, and even though I was using only .20 gram BB's which is a bit light for this gun, I still found they tracked well and stayed on target both near and far. My 30 foot semi rested testing produced a nice 2 inch grouping. Shooting the barrel out on the tactical range I did have to aim just a bit higher when back out at 60 or more feet away. Maybe a slight bit more hop-up would do the trick.
Build Quality: The WE G39C is very well made, yes it has lots of polymer but so does the real version and the plastic seems very durable, The fit and finish looked great and there is a lot of metal in and around the G39C where it would be on the real steel gun and where it is really required to be. Like the trigger, flash hider, rails, pins, switches, rear sight, magazine and most internal parts also.
Realism: I bet if you had the real G36C sitting beside the WE G39C you would be hard pressed to tell them apart? WE did a great job making this Airsoft version very believable not just in appearance but also when field stripping it and shooting it with it's heavy bolt and felt blowback recoil.
Available at the:Canada Replica Airguns Store.
Pros:
Amazing attention to detail, just like the real H&K G36C.
All metal internals and metal external mechanical parts.
Semi auto & full auto selectable.
Awesome blowback kick really hits you in the shoulder.
Field strips just like the real steal version.
Nice high 400 FPS and good accuracy near and far.
Full ambidextrous, even the charging handle can be switched side to side.
Can get up to three magazines per propane fill up.
Very well priced for how awesome it really is.
Cons:
Some people may not like that it is a polymer built gun externally but it is what it is!
And that's it!
Comments:
So far I have been impressed with We an Airsoft company, they really know how to make very realistic and high quality products. I wasn't sure if I was going to like the mostly polymer external build on this gun but the sheer quality and solid build took away any ideas that tis Airsoft gun would be anything like a toy. The WE G39C is one of the best performing GBB Airsoft guns I have tried out getting up to 90 shots per gas fill on a magazine which is very impressive. We was also able to keep the price down which means more people can get into one of the G39C's. If you've been thinking about adding one of these to your arsenal I don't see any reason why not to!
I already posted that I recently hit 10,000,00 YouTube video Views but I have been hinting about there being another Giveaway/Contest. After much thought I wanted to have a way that more than just one person could benefit from this. So I decided to list a bunch of my Canada Store products on sale. (Sorry US customers but I have a lot more restrictions in the US when it comes to what I can do with my pricing).
These Canadian sales will be in effect from now until October 10th and to make things even better, one lucky shopper during this time will get their entire order for free (This includes US Customers too).
So make sure to get in on the savings and the chance to get your order free!
In this "Update Video" I also show off some new previously owned guns added to my collection, an Airsoft ASG shell ejecting CZ 75, a no-name KSC Airsoft shooter and a Gamo Combat .177 caliber pellet revolver. And if you're into spring piston break barrel pistols, make sure to watch for my customized Exisco XSP180 .177 caliber Verminator!
Here is a sample of some of the items on sale right now...
We made it! I hit 10,000,00 YouTube Channel video views over the weekend and I'm really excited about it!
Thanks again to all of my loyal followers who spend many hours watching my videos :) Without you this huge accomplishment would never have happened!
I will be posting a YouTube video that will go over how I am going to celebrate my Ten Millionth YouTube Video View and how that will benefit you my fans and customers so keep posted...
I managed to grab few more Black Kimar - Crosman CK92's for the Canada Store, so if you missed out when I had these a while back make sure to grab one before they're gone again. This may just be the last time you will be able to buy a direct from the Kimar factory refurbished CK92 Beretta styled all metal classic pellet pistol!
