Trigger Pull: The trigger pull on the ASG/KWC MP9 A3 is single action only as the charging handle has to be pulled back to open and release the bolt for the first shot. There is a trigger safety but it is not noticeable when shooting this Airsoft machine gun. There is a short take-up and then a light release and short reset.
Accuracy: Right away I put my NcSTAR 1x25 Red Dot sight on the ASG/KWC MP9 A3 as it was a perfect fit for this small and compact machine pistol, it did not take long to sight it in and I was able to get decent accuracy in both semi auto and full auto burst due to the mild but very fast cycle rate. I was able to get a 2 inch grouping at 30 feet out using a rested position. In full auto mode the grouping did not really get too much wider. I also got between 350 and 370 fps when testing the ASG MP9 on my Chronograph.
Build Quality: The ASG/KWC MP9 A3 Airsoft Machine Pistol is built very well, using similar components that you would find on the real steel version so yes it has a plastic shell but that is to be expected. The ASG/KWC MP9 A3 does use lots of metal where it needs to be like in the internal parts, pins, bolt, barrel, rails and even the magazine. The fit and finish is near perfect!
Realism: I have to say the ASG/KWC MP9 A3 is pretty much a bang on copy of the real steel Brügger & Thomet MP9 A3. The only telltale sign is the ASG branding on the right side along with the 6mm caliber beside the ASG logo. One other small detail is the magazine which is metal on the Airsoft version where as you would find the real version uses a transparent polymer magazine.
Rate of fire is very fast and does not slow down much even when the gas is running low.
Good overall power for a short barreled gas blowback gun.
Very nice trigger with working trigger safety.
Excellent replica of the real steel version in just about every way.
Can add a lot of gear and make this gun your own.
Decent price for all you get out of the ASG MP9!
Cons:
Bolt didn't lock back for me when the gun got really cold?
Real magazine would actually be transparent polymer.
Comments:
I really like the ASG/KWC MP9 A3! I love the look, I love the features and the price is also really good for what you are getting. I was really impressed with the super high cycle rate and because of the small low weight bolt the gun does not move around too much or slow down in rounds per minute even when you do a full mag dump. There is however just enough blowback recoil to give you that GBB realistic feel! I also found that the magazine holds a lot of gas so it is possible to get two magazine worth of shots out of a single fill, that's around 100 shots. I also like how easy it is to add to the ASG/KWC MP9 A3, I had mine pimped out and looking amazing right away and suggest if you get one you do the same :)
My Vimeo Video of the ASG/KWC MP9 A3 Airsoft Machine Pistol:
For my Canadian Blank Gun collectors, I'm not going to list these ones as Silent Auction items this time around so if you're looking for an EKOL blank gun, I have one of each of the following versions for sale:
This one has to be the coolest Machine Pistols out there!
The KWA (ASG) B&T MP9 A3 Black GBB is a compact gas blowback machine pistol licensed by the original manufacturer Brügger & Thomet, Switzerland. The A3 version has a bottom rail and a folding stock and the whole body is made of reinforced fiber polymer. The whole construction of the MP9 is very realistic and it is field stripped as the real thing. The cocking handle is functional with the realistic metal bolt. The B&T MP9 has adjustable hop-up and both semi and full auto firing mode can be selected. Furthermore the trigger has an active safety function.
Plastic 6mm Airsoft BB's
(GBB) Gas Blow Back
Semi & Full Auto
366+ fps w/ .2g
Adjustable Hop Up
3.9 lbs
48 Round Magazine
11.5 Inches Folded - 20.5 Inches Open
Reinforced Fiber Polymer Body
Field Strips like the Real Steel
NO CLEAR sections (All Black) and does NOT have orange tip!
Take aim and fire with "The gun that helped to change the world". The Thompson Military M1A1 AEG is a battlefield weapon with a serious attitude. This beautiful gun is a fully licensed 1:1 scale replica of a real Tommy gun, and features a full metal body with artificial wood grain finish, a 60 Rd plastic magazine, and a shot velocity of 500 fps (using .20g BBs). The M1A1 also features an adjustable BAXS System for increased power and shooting accuracy. Airsoft enthusiasts will love the stunning classic era looks and awesome semi/fully automatic firepower of the Thompson Military M1A1 AEG. Do not miss this gun! Recommended for use with high quality .25g BBs.
Trigger Pull: The trigger pull on the WE G39C is about what you would expect from a Single action only Semi Auto rifle, it has a very slight take up and then about a 4 pound trigger pull that is crisp and smooth.
Accuracy: Out of the Box the WE G39C shot great up close and farther out, the hop-up seemed to be already dialed in, and even though I was using only .20 gram BB's which is a bit light for this gun, I still found they tracked well and stayed on target both near and far. My 30 foot semi rested testing produced a nice 2 inch grouping. Shooting the barrel out on the tactical range I did have to aim just a bit higher when back out at 60 or more feet away. Maybe a slight bit more hop-up would do the trick.
Build Quality: The WE G39C is very well made, yes it has lots of polymer but so does the real version and the plastic seems very durable, The fit and finish looked great and there is a lot of metal in and around the G39C where it would be on the real steel gun and where it is really required to be. Like the trigger, flash hider, rails, pins, switches, rear sight, magazine and most internal parts also.
Realism: I bet if you had the real G36C sitting beside the WE G39C you would be hard pressed to tell them apart? WE did a great job making this Airsoft version very believable not just in appearance but also when field stripping it and shooting it with it's heavy bolt and felt blowback recoil.
Amazing attention to detail, just like the real H&K G36C.
All metal internals and metal external mechanical parts.
Semi auto & full auto selectable.
Awesome blowback kick really hits you in the shoulder.
Field strips just like the real steal version.
Nice high 400 FPS and good accuracy near and far.
Full ambidextrous, even the charging handle can be switched side to side.
Can get up to three magazines per propane fill up.
Very well priced for how awesome it really is.
Cons:
Some people may not like that it is a polymer built gun externally but it is what it is!
And that's it!
Comments:
So far I have been impressed with We an Airsoft company, they really know how to make very realistic and high quality products. I wasn't sure if I was going to like the mostly polymer external build on this gun but the sheer quality and solid build took away any ideas that tis Airsoft gun would be anything like a toy. The WE G39C is one of the best performing GBB Airsoft guns I have tried out getting up to 90 shots per gas fill on a magazine which is very impressive. We was also able to keep the price down which means more people can get into one of the G39C's. If you've been thinking about adding one of these to your arsenal I don't see any reason why not to!
Action: Blowback, Single action only on KP-07 - Single/Double action on KP-02 & Elite 1A
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 20/22/20 rounds.
FPS: 366+ fps.
Trigger Pull: The trigger pull on all of these KJWorks Airsoft guns is very nice in both single and double action, The KP-07's true single action only 1911 trigger is a beauty, with no take up at all and a very light and smooth release. The Beretta Elite 1A is the next best with a surprisingly light weight double action trigger. All of these guns will be shooting primarily in single action as the blowback precooks the hammer with each shot.
Accuracy: I shot all of these fine KJWorks Airsoft guns from 20 feet out in semi rested position and got very similar results. I was able to place 10 rounds in a 2 to 2.5 inch grouping for all guns, with the KP-07 1911 shooting the most well centered. The Beretta Elite 1A shot well centered also but just a hair under center mass while the KP-02 seemed to shoot low but could be adjusted to shoot higher by increasing the hopup. All three KJWorks Airsoft pistols got right around the 330-350 fps mark (5 shot average chrony testing) with the KP-7 1911 and Elite 1A Beretta hitting the higher end and the KP-02 Sig P229 getting right around 330fps. All three KJWorks Blowback Airsoft guns should be able to hit 366+fps in the right shooting conditions.
Build Quality: I was extremely impressed with the build quality of these KJWorks Airsoft guns, the fit and finish is the best I have seen on any of my guns including Airguns also. Even after shooting several magazines worth of BB's, the painted metal friction areas did not seem to show nearly as much wear as some of my other blowback guns. The tolerances between the moving parts like the slide and frame are very tight showing excellent workmanship and machining with these KJWorks Airsoft guns.
Realism: All of these KJWorks 6mm Airsoft pistols are based on real steal versions of the same guns (KP-02 is a Sig Sauer P229 copy, the KP-07 is a Colt 1911 copy and the Elite 1A is a Beretta Copy). They are very good replicas even though the KP-02 and KP-07 do not have any specific licensing on them. The Elite 1A does have licensing which is a plus. The only negative thing I can think of is the fact that the KP-02 has the rather unusual CO2 magazine that sticks out of the bottom of the handle that is not at all like a real P229 magazine. I do believe you can find a GBB magazine that would be much more in line with the real steel version of this magazine.
All metal guns with good overall realistic weights.
Very heavy blowback on all guns, especially the KP-07 1911
Excellent fit and finish - best I have seen.
Nice mid range fps - great for on the field.
Very consistent accuracy for all KJWorks Airsoft guns.
Very believable replicas of the real steel versions.
Cons:
KP-2 and KP-07 did not have official licensing.
All seem to go through CO2/Gas fairly fast.
KP-02 had a rather strange looking CO2 magazine.
KP-02 slide did not lock back after last shot, may be due to CO2 magazine configuration.
Comments:
I guess you get what you pay for, these KJWorks Airsoft guns do fetch a bit higher price but when you take them out of the box and really look at them closely you can see why, they are pretty much flawless and the fit and tolerances are very good with very little play in the mechanical parts. Shooting these guns is just as wonderful, they all worked very well and got consistent accuracy and fps between shots. There where no ammo loading problems and no unexpected behaviors with any of these Airsoft pistols. If you can afford to pay that little bit more for one of these very high quality KJWorks Blowback Airsoft guns, you will not be let down!
I haven't had a blank gun Silent Auction for a few months now. Not too many people are willing to give theirs up here in Canada. Today I am featuring two very good condition EKOL blank guns, both front firing and in Satin finish and both full size and full weight 15 round double stack semi auto shooters. The EKOl Dicle is semi auto only while the Jackal Dual has a selector switch for shooting in semi auto or full auto. The EKOL Dicle comes with it's original hard shell case, manual and flare adaptor while the EKOL Jackal Dual does not have a case but does come with a flare adaptor.
Remember the Silent Auctions for blank guns are primarily for my Canadian customers as blank guns are very hard to come by here in Canada. If you are interested in bidding on one or both of these guns, please send me an email with your highest bid to mike@replicaairguns.com. This Silent Auction end date is August 24th at midnight so get your bids in ASAP.
If you are US based you can order a front firing EKOL Blank gun from my US Replica Airguns Store.
You can also check out my full reviews on both these guns:
Here is a short video update along with a few photos of my KWC and Umarex Airsoft Pistols recently added to the Canada Replica Airguns Store. The models showcased are the KWC M1911 & KWC M92 (PT99) along with the Umarex Walther P99. All of these pistols use 6mm plastic Airsoft BB's, shoot over 366 fps using CO2 and have blowback operation.
Watch my Vimeo Update Video on these three Blowback Airsoft Pistols:
Last but not least for now, just added to the Canada Replica Airguns Store - the KWC M92 (PT99) CO2 Blowback Airsoft Pistol.
The KWC M92 (PT99) is essentially is the Airsoft KWC version of the Cybergun GSG 92 without any branding and also in 6mm Airsoft caliber. And it comes already to shoot in either semi or full auto so no modifications required!
The KWC M92 PT99 features a full size drop out metal magazine that holds both the 6mm Plastic Airsoft BB's and the CO2 cartridge. It features a working slide with realistic blowback operation and can be fully field stripped just like the actual sidearm.
Last update for the day, I am happy to announce that I have added two Gas Blowback Airsoft Rifles from WE to the Canada Replica Airguns Store. They are both fantastic guns that are the spitting image of their real steel counterparts and both have awesome blowback action and feel. Both rifles shoot in semi and full auto which is exhilarating!
I am super happy to announce a bunch of new Canada Store Products coming very soon. I have sourced out some Blowback Airsoft pistols and also a couple of GBB We Airsoft Rifles. (KJWorks: Elite 1A, KP-07, KP-02) (KWC: DE .50, SW40F) (RAM P99) (WE: G39C, M4 CQBR).
I am also adding some airgun pistols that I have not been able to find a supplier for here in Canada up until now, and I will also be adding them to the Canada Store shortly. (Umarex: Browning Buck Mark URX, XBG, Beretta 90two).
And of course the addition of some new accessories that I have been wanting to have listed in the Canada Store for some time now. (Daisy Zinc Coated BB's, Umarex CP99 - PPK - Rotary Magazines, Body Guard Mace Spray, Schrade Hand Cuffs)
So if your interested in any of these items then keep checking back, I will be adding them to the Canada Store as quick as I can - time permitting!
The video is just a quick preview but you get to see the guns up nice and close and at the end I also show off my 9mm bullet Casing Ear Bud Headphones and talk a bit about what I like about them.
Without further ado here is My YouTube video featuring the Thompson M1928 Submachine Gun, ICS SIG SG-551 SWAT and 9mm Bullet Digital Stereo Earbuds:
I have had a lot of people ask to buy my Russian made ZMZ Tyrex PPA-K-01 4.5mm BB Machine Gun and offer a lot of money for it and I have turned them all down, some may say I am crazy but the people offering the big bucks understand how rare this gun is here in North America and will pay what it takes to own one.
I was approached by the seller that I originally purchased my ZMZ Tyrex PPA-K-01 from and he informed me that he has two brand new in the box units he has acquired and is willing to sell. So for those of you who wanted to buy mine from me, now is your chance to get one!
He is asking $850, "this is not a misprint", they are not cheap, they are a rare collectors item, if you can find one for less money then grab it quick.
Interested parties can send me an email and I will forward your information to the seller. You can work out the details with him. Good luck!
The Thompson M1928 Chicago Style 1928 Submachine Gun with Drum Magazine is an awesome weapon that delivers semi & fully automatic fire at outstanding velocities in the battlefield. This gun has a polished full metal body that recreates the awesome look and feel of a real Tommy gun. The gun features a metal gear box & steel bushings, a high-capacity 450 rd drum magazine and a shot velocity of 390-450 fps (using .20g BBs).
The front charging handle allows you to control the gun and an adjustable BAXS shooting system improves the accuracy of the gun when shooting from long distances. Own your enemies and order today! This rifle also Includes: 8.4 V 2000 mAh Ni-CD battery, 300 mah charger (6.5 hrs charge time), cleaning rod & manual.
We just got in a new Field ready Airsoft AEG rifle, the Cybergun ISC SG-551 SWAT version. Get in on our introductory sale price!
The Cybergun ICS SIG SG-551 SWAT offers hardcore performance in a lightweight and compact package. Manufactured in Taiwan under licensed from Cybergun this rifle features full SIG trademarks engraved into its receiver.
With a stamped aluminum upper receiver and cast lower, the SG-551 weighs over a pound less than a KWA M4 while retaining the same strength and rigidity. Complete with a fiber composite handguard and pistol grip you can feel the quality of this rifle as soon as you pick it up. Its side folding skeleton stock locks firmly into open and closed positions making this rifle highly versatile in both indoor and outdoor scenarios. It features a centrally located magazine release and ambidextrous selector levers allowing for left or right handed use. One cool thing about these ICS SIG series rifle is the functioning bolt catch. Pull the bolt back all of the way and it will lock open allowing you to easily adjust the rifle hop-up without needing a third hand to keep the bolt back. Once you are done just flip the bolt release and the bolt flies forward with a nice metallic ring. Other features include a folding trigger guard for use with thick gloves, adjustable front sight complete with hood and changeable long/close range sight post, rotary rear sight with four adjustable apertures as well as windage and elevation adjustments.
Its battery is housed in the handguard which has enough room to hold an 8.4v or 9.6v AK Stick Type battery.
I have been hinting about an even bigger Canada sale on the King Arms Colt M4A1 Metal AEG Airsoft Rifle and here it is - now $100 OFF the regular price (Canada Store Only) so don't wait as I'm not sure how long this sale will last...
The classic Webley Tempest is now available in the Replica Airguns Canada Store and let's set the record straight right from the start. This is a the latest made in Turkey version and it really smokes! From most peoples reviews the fit and finish are comparable to previous versions and we will just have to take their word for it as I have never had a Webley Tempest to compare one to? I can tell you the new Turkish made Webley Tempest is very well made air pistol and when it comes to power this gun take it right to the edge in terms of what is legal as an unregulated airgun in Canada.
I tested both the .177 caliber and .22 caliber Webley Tempests and they both shot very hard, keep in mind, with added velocity there is also added cocking effort and the .22 caliber definitely uses a stronger spring as it also has more energy behind the fast moving .22 caliber pellets. The .22 is not for everyone because it take a lot for work to cock this bad boy!
These are the results I got shooting the Webley Tempests using my Chronograph:
.177 Caliber
6.9 grain pellets used
499 fps
3.8 foot pounds
5.2 Joules
.22 Caliber
11.9 grain pellets used
400 fps
4.2 foot pounds
5.7 Joules
Here is some more info on the new Turkish Webley Tempest:
This is the latest and most powerful (made in Turkey) version of the original barrel over cylinder design that made Webley pistols world famous. Positively locked barrel using the famous Webley revolver type stirrup.
The Webley Tempest is a spring-operated, single shot; break barrel air pistol fitted with a precision-rifled barrel primarily suited to waisted lead pellets. The gun is available in either .177 or .22 caliber. The gun incorporates many additional design features, which include: adjustable trigger, manual safety catch (i.e. selective use), adjustable rear sight with vertical and horizontal adjustment. Handle is designed to fit the hand, with a thumb rest and checkered grips.
We where out of the Umarex Steel Storm for a while, I had a lot of people asking about this one so I thought I would let everyone know we now have the Umarex Steel Storm back in stock and for sale again in the Canada Replica Airguns Store.
Another slap in the face to my Canada Customers :( But for my US customers this is great news, I pretty much added the entire EKOL - Voltran linup of blank guns in a variety of styles and finishes to the US Replica Airguns Store.
Here is a complete listing of the EKOL - Voltran lineup: