Type: Airsoft Assault Rifle.

Manufacturer:WE.

Model: G39C.

Materials: Metal & plastic.

Weight: 6.1 pounds.

Barrel: 9.5 inches, smooth bore.

Propulsion: (GBB) Gas Blowback.

Action: Semi & full auto.

Ammunition Type: Airsoft 6mm Plastic BB's.

Ammunition Capacity: 32 rounds.

FPS: Up-to 420.

Trigger Pull: The trigger pull on the WE G39C is about what you would expect from a Single action only Semi Auto rifle, it has a very slight take up and then about a 4 pound trigger pull that is crisp and smooth.

Accuracy: Out of the Box the WE G39C shot great up close and farther out, the hop-up seemed to be already dialed in, and even though I was using only .20 gram BB's which is a bit light for this gun, I still found they tracked well and stayed on target both near and far. My 30 foot semi rested testing produced a nice 2 inch grouping. Shooting the barrel out on the tactical range I did have to aim just a bit higher when back out at 60 or more feet away. Maybe a slight bit more hop-up would do the trick.

Build Quality: The WE G39C is very well made, yes it has lots of polymer but so does the real version and the plastic seems very durable, The fit and finish looked great and there is a lot of metal in and around the G39C where it would be on the real steel gun and where it is really required to be. Like the trigger, flash hider, rails, pins, switches, rear sight, magazine and most internal parts also.

Realism: I bet if you had the real G36C sitting beside the WE G39C you would be hard pressed to tell them apart? WE did a great job making this Airsoft version very believable not just in appearance but also when field stripping it and shooting it with it's heavy bolt and felt blowback recoil.

Available at the:Canada Replica Airguns Store.

Pros:

• Amazing attention to detail, just like the real H&K G36C.

• All metal internals and metal external mechanical parts.

• Semi auto & full auto selectable.

• Awesome blowback kick really hits you in the shoulder.

• Field strips just like the real steal version.

• Nice high 400 FPS and good accuracy near and far.

• Full ambidextrous, even the charging handle can be switched side to side.

• Can get up to three magazines per propane fill up.

• Very well priced for how awesome it really is.

Cons:

• Some people may not like that it is a polymer built gun externally but it is what it is!

• And that's it!

Comments:

So far I have been impressed with We an Airsoft company, they really know how to make very realistic and high quality products. I wasn't sure if I was going to like the mostly polymer external build on this gun but the sheer quality and solid build took away any ideas that tis Airsoft gun would be anything like a toy. The WE G39C is one of the best performing GBB Airsoft guns I have tried out getting up to 90 shots per gas fill on a magazine which is very impressive. We was also able to keep the price down which means more people can get into one of the G39C's. If you've been thinking about adding one of these to your arsenal I don't see any reason why not to!

Buy the WE G39C in Canada

Buy Airsoft Rifles in the US

Type: Paintball Pistol.

Manufacturer:RAP4.

Model:RAP4 RAM P99

Materials: Metal & Polymer.

Weight: 2 pounds.

Barrel: 4 inches, metal non-rifled.

Propulsion: 12 gram CO2.

Action: Semi auto, single & double action with blowback.

Ammunition Type: .43 caliber paintball or rubber bullet.

Ammunition Capacity: 9 round magazine.

FPS: 250-300fps.

Trigger Pull: The trigger pull on the Real Action Paintball RAP4 X50 is rather nice in single action, being a true blowback gun, the cycling of the slide not only chambers a round but also pre-cocks the hammer allowing for a very smooth and light single action trigger pull. There is also a working de-cocker that allows you to release the internal hammer. Double action is noticeably heavier but would only really be used on the first shot if you had already used the de-cocker.

Accuracy: After my previous review of the RAM X50 I was expecting this gun to perform pretty much the same. I did find it to be a bit more accurate within the 20-25 foot range using the rubber balls but when I got out into the field and switched over to the Paintballs I found that they where really hooking and darting all over the place? Mind you, this gun was right out of the box and not broken in yet. I also got a bit lower fps (right around 250) out of the RAP4 RAM Walther P99 compared to my RAM X50 but again my review unit had not been adjusted in any way and I imagine I could turn it up a bit to get more fps out of it if I wante to. The plus side is I was able to get an astounding 8 magazines worth of shots out of one CO2.

Build Quality: The RAP4 RAM Walther P99 styled Paintball Pistol is built very well, it does have a polymer frame but the gun overall has lots of metal parts and a very good overall 2 pounds weight to it dry. The blowback action is very snappy and all the mechanics and fit and finish all look and function very nicely. The slide spring is nice and firm giving this paintball gun a snappy recoil and the feel closer to a real gun than that of an airgun.

Realism: The RAP4 RAM Walther P99 was primarily made to simulate real word shooting environments for Police and Military users and even includes Walther branding and licensing, it is a very believable looking and functioning copy of the real steel semi auto pistol it replicates. Other than the exception of the CO2 Cylinder hanging a bit far out of the bottom of the handle. The RAM P99 would be hard to tell from the actual Walther P99, especially when looking down the large .43 caliber barrel. The Blowback action and firm recoil help pull off the believability when shooting this ralistic Paintball Pistol.

Purchase it from:The Replica Airguns Store

Pros:

• Good weight and solid feeling gun.

• Full metal slide with nice heavy blowback recoil.

• All metal heavy 9 round magazines.

• Very Accurate Walther P99 replica including licensing and trademarks.

• Everything works pretty much like the real gun so a great training tool.

• Good accuracy up close and lots of shots per CO2 for such a large round.

• Nice light single action trigger and working de-cocker.

• Fairly affordable.

Cons:

• CO2 cylinder sticks out from the handle and looks a bit odd.

• Paintball accuracy out at range was unpredictable.

• Does not field Strip conventionally.

Comments:

This was my second time testing a RAP4 RAM product and again I took the chance to use it as it was intended to be used - in the field going through simulated tactical situations. My targets where barrels this time but they could have been other people with similar paintball guns shooting back at me which would have put even more pressure on me and forced me to really see where my mistakes are being made. That's the whole point of this type of training airgun, make it as real as it can be without your actual life being in danger so that when you are in danger you will not have to think about what you are doing but simply react based on your previous training. I think anyone who is a gun owner wanting to improve their reactive shooting skills should invest in one of these Paintball guns. One day you may thank yourself but let's hope it does not come to that!

Buy Umarex Pistols in Canada

Buy Umarex Pistols in the US

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"

All references, photos and video claiming that any item in this Review/Video looks like a Glock or is a Replica of a Glock in any way shape or form have been removed from this post as requested by Glock"Renzulli Law Firm"

Type: Airsoft GBB pistol.
Manufacturer: KSC?
Model: NAME REMOVED 17.
Materials: Plastic & metal.
Weight: 1.6 pounds.
Barrel: 4 inch, non-rifled.
Propulsion: GBB - Propane.
Action: Semi auto - single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 23 round drop out all metal magazine.
FPS: Up to 330.
Trigger Pull: The trigger pull on this Mystery NAME REMOVED 17 GBB Airsoft pistol is very nice with some take-up at the beginning but once you hit the resistance part it is smooth and the release is very light. The NAME REMOVED trigger safety actually works on this model which is a nice touch!

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm" 

Accuracy: I found the (KSC) NAME REMOVED 17 to have very good accuracy, getting about a 2 inch 8 shot grouping from 20 feet out in a semi rested position (sand bag up front, standing in the back). I also put 5 rounds through my Chrony Chronograph and this Airsoft Gas Blowback pistol averaged right around 326 fps using .20 gram 6mm plastic Airsoft BB's.

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm" 

Build Quality: The (KSC) NAME REMOVED 17 Airsoft pistol uses a combination of plastic and metal and has a decent overall weight and feel to it thanks to the full size drop out metal magazine. The frame like a real NAME REMOVED is plastic but the slide and outer barrel are also plastic which on real steel NAME REMOVED would not be the case. Even so the overall weight is good and the fit and finish is very good. Even though this is a pre-owned Airsoft gun it is in as-new condition and seems to be holding up very well.

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm" 

Realism: The (KSC) Airsoft NAME REMOVED 17 is very realistic in appearance and operation with all parts working exactly as they would on a real NAME REMOVED 17. Even the trigger safety works and field stripping this Airsoft gun is the same as a real NAME REMOVED. NAME REMOVED trademarks are present throughout, the only real giveaway is the plastic slide and outer barrel but you would need to examine this gun close up to see this for yourself.
Purchased privately, check out some other Airsoft guns in the Replica Airguns Store.

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"

Pros:

• Very realistic and accurate licensing.
• Got a tight two inch group but was a bit low, hop up should get it back up.
• Decent FPS for a short barreled GBB Airsoft gun.
• Even thought the frame and slide are polymer, it has good weight to it.
• Everything works like the original, field strips and most mechanical parts are metal.
• High capacity 23 round full size drop out metal magazine.
• Adjustable rear sight for windage but is a bit lose on mine.
• Good usage of the gas - two full magazines.

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"

Cons:

• Hard to get here in Canada.
• Mostly plastic main build - slide and outer barrel are plastic.
• Rear sight was a bit lose.

Comments:
I am hoping that someone will know for sure who make this Airsoft NAME REMOVED 17 but either way it has been great playing around with it and doing my research to see if I could find out on my own. It's hard to tell you to go out and get one because I'm not sure what to go out and get at this point or even if this version can still be purchased and if so where from? All these questions... I can tell you that it's great to finally have an actual NAME REMOVED replica in my collection, I have a few NAME REMOVED-like guns but until I got my hand on this Mystery NAME REMOVED 17 GBB Airsoft pistol I really only had close proximities. So if you have the opportunity to snatch up something like this I say go for it!

Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"

Watch my YouTube Full Video Review of this Mystery NAME REMOVED 17 Airsoft Pistol:

Buy Airsoft Pistols in Canada  -  Buy Airsoft Pistols in the US

Type: Pellet Revolver.

Manufacturer:Crosman.

Model:357.

Materials: Metal and plastic.

Weight: 1.75 pounds.

Barrel: 6 inch, rifled.

Propulsion: 12 gram CO2.

Action: Revolver - single and double action.

Ammunition Type: .177 caliber pellets.

Ammunition Capacity: 10 shot rotary magazine.

FPS: Up to 435.

Trigger Pull: The trigger pull on the Crosman 357 is decent in both single and double action. Single action is much shorter and lighter but not overly light with just a very short break to it. In double action it does get heavier and much longer as is expected. People with small hands may have to adjust their grip so they will have enough extension for the entire trigger pull, this is partially because of the larger grips that sit far back on the revolver frame.

Accuracy: I found the Crosman 357 pellet revolver to have excellent accuracy, getting about a 1 inch grouping from 30 feet out in a semi rested position (sand bag up front, standing in the back). I also put 6 rounds through my Chrony Chronograph and the Crosman 357 averaged 402 fps using RWS 6.9 grain lead pellets.

Build Quality: The Crosman 357 CO2 Pellet Revolver uses a combination of metal and plastic and has a good overall weight and feel to it. There could be more metal (like in the outer barrel) but Crosman used metal parts where they really needed to be like in the main frame, trigger, hammer, CO2 area and inner barrel. This air pistol has been around for a long time and so you can count on all the bugs being worked out. You will not find a great amount of detail in the Crosman 357 and some of the joints seem a bit unrefined but overall it is a nice looking airgun and feels well made.

Realism: The Crosman 357 is a replica of the Colt Python 357 Magnum and overall looks similar in shape. I would have liked to have seen a full swing our cylinder but this would have meant a complete redesign and the Crosman 357 main design goes back to the early 80's. Yes there are some newer revolver styled airguns like the Dan Wesson that have full swing out cylinders (BB only) but I still would have liked to have seen this, maybe on a future updated revision?

Available in the:Replica Airguns Store.

Pros:

• Inexpensive Pellet revolver, not really any other pellet revolvers out there to compare to.

• Good usage of metal parts. (Metal  trigger, hammer, frame, barrel, CO2 tab screw).

• Single and double action trigger.

• Excellent accuracy and good power with a reasonable amount of shots per CO2.

• Can mount optics on the dove tail railed barrel.

• High capacity 10 round removable magazine.

• Fully adjustable rear sight.

Cons:

• Outer barrel is plastic.

• Grips and trigger pull length may be a bit long for smaller handed people when shooting in double action.

• Some of the finish detail could be better (seems).

• A slight recess on the inner barrel would have added to the realism.

Comments:

Reviewing this fun Crosman Pellet revolver was a bit of a walk in the past for me. back when I was in my early teens I had one and it went with me on just about all of my back woods adventures. I'd have to say I learned how to shoot with this pistol and it felt right at home back in my hands after all these years... Back in the day I didn't do any scientific testing with my Crosman revolver but I can tell you it shot hard and true then, just like it does now! I'm not sure why I held out so long getting another one, the price is right and if you are looking for a nice multi-shot pellet pistol with excellent accuracy and good power for well under $100, the Crosman 357 might just be for you.

Buy Air Pistols in Canada

Buy Air Pistols in the US

Type: Apring piston air pistol.

Manufacturer: Webley.

Model: Tempest.

Materials: Mostly metal with minimal plastic parts.

Weight: 2.1 pounds.

Barrel: 6.9 inches, metal rifled.

Propulsion: Spring-piston-operated.

Action: Single shot.

Ammunition Type: .177 & .22 caliber pellets.

Ammunition Capacity: 1 pellet.

FPS: 400-499.

Trigger Pull: The trigger pull on the Webley Tempest is very good, being that it is single action, there is next to no take-up and the pull itself is very light, yet not so light that you would accidentally shoot the gun. This helps a lot with accuracy. And to top it off, you can even adjust the trigger pull weight to your liking from 3-5 pounds!

Accuracy: Being that the Webley Tempest is a spring piston design, there is a noticeable amount of felt recoil when the spring snaps backwards, and I say backwards because it compress towards the front of the gun. With many spring piston rifles the spring snaps forwards almost giving a reverse recoil effect. The Webley Tempest recoil hits you in a familiar direction which made the airgun feel a bit more natural and I believe helped me to get a nice 1.5 inch 5 shot grouping from 30 feet out in a semi rested position. I also got a 400 fps average rating form my .22 caliber 11.9 grain RWS pellets which took me right up to the Canadian limit of 5.7 Joules to stay just within the limits of the uncontrolled firearm status for an airgun. FEW!

Build Quality: Build quality is very good, most of the gun is all metal with a few plastic parts, basically the nose cap and hand grips, everything else is metal on the Tempest. The Webley Tempest has a nice compact size for a spring piston design and has a nice weight to it making it feel very solid but not overly heavy. I do have to say the cocking effort is very heavy and you will have to try a few different techniques until you find a way that works for you.

Realism: This is not a replica airgun so to speak of but the basic pistol grips and trigger are designed to replicate a revolver more than anything. The Tempest is very unique and its basic design roots go back to the 1920's.

Purchased From: the Replica Airguns Store.

Pros:

• Very accurate for a spring piston air pistol.

• One crank - one shot.

• Mostly metal and very solid!

• Fully adjustable rear sight for windage and elevation.

• Small and compact yet very effective power.

• Trigger pull adjustable from 3-5 pounds.

Cons:

• If you're left handed the grips will not be as comfortable for you.

• Sight adjustment will take some time to get right.

• Spring recoil takes some getting used to so practice - practice - practice.

• Cocking effort especially on the .22 caliber model is very heavy.

Comments:

Some people may qualify the fact that this "new version" is now made in Turkey but with that said I have been selling the Turkish made Webley Alecto for some time now and it has been one of my most trouble free airguns in the web-store. The Tempest looks to me to be just as well made and a nice perk with the Turkish made Tempest is its jump in velocity with the .22 actually hitting 400 fps and the .177 getting right around 500 fps, not bad at all for a fairly short barreled pistol. I also really like the small size this airgun has, it's no larger or heavier than say a Beretta 92 yet somehow it has to cram all the mechanics for the spring piston design into it and still get good performance. The only real reason I would not recommend this gun to some people is if you are of slight build or perhaps have some hand or wrist problems because it does take some effort to cock this gun, if this is a factor for you, you may want to go with the .177 caliber version as it does have a lighter cocking effort.

Buy this gun in Canada 

Type: 6mm Plastic BB Airsoft Pistols.

Manufacturer:KJWorks.

Model:KP-02, KP-07, Elite A1

Materials: Metal slides & frames.

Weight: 2/2.1/2 pounds.

Barrel: Metalnon-rifled smooth bore.

Propulsion: 12 gram CO2.

Action: Blowback, Single action only on KP-07 - Single/Double action on KP-02 & Elite 1A

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 20/22/20 rounds.

FPS: 366+ fps.

Trigger Pull: The trigger pull on all of these KJWorks Airsoft guns is very nice in both single and double action, The KP-07's true single action only 1911 trigger is a beauty, with no take up at all and a very light and smooth release. The Beretta Elite 1A is the next best with a surprisingly light weight double action trigger. All of these guns will be shooting primarily in single action as the blowback precooks the hammer with each shot.

Accuracy: I shot all of these fine KJWorks Airsoft guns from 20 feet out in semi rested position and got very similar results. I was able to place 10 rounds in a 2 to 2.5 inch grouping for all guns, with the KP-07 1911 shooting the most well centered. The Beretta Elite 1A shot well centered also but just a hair under center mass while the KP-02 seemed to shoot low but could be adjusted to shoot higher by increasing the hopup. All three KJWorks Airsoft pistols got right around the 330-350 fps mark (5 shot average chrony testing) with the KP-7 1911 and Elite 1A Beretta hitting the higher end and the KP-02 Sig P229 getting right around 330fps. All three KJWorks Blowback Airsoft guns should be able to hit 366+fps in the right shooting conditions.

Build Quality: I was extremely impressed with the build quality of these KJWorks Airsoft guns, the fit and finish is the best I have seen on any of my guns including Airguns also. Even after shooting several magazines worth of BB's, the painted metal friction areas did not seem to show nearly as much wear as some of my other blowback guns. The tolerances between the moving parts like the slide and frame are very tight showing excellent workmanship and machining with these KJWorks Airsoft guns.

Realism: All of these KJWorks 6mm Airsoft pistols are based on real steal versions of the same guns (KP-02 is a Sig Sauer P229 copy, the KP-07 is a Colt 1911 copy and the Elite 1A is a Beretta Copy). They are very good replicas even though the KP-02 and KP-07 do not have any specific licensing on them. The Elite 1A does have licensing which is a plus. The only negative thing I can think of is the fact that the KP-02 has the rather unusual CO2 magazine that sticks out of the bottom of the handle that is not at all like a real P229 magazine. I do believe you can find a GBB magazine that would be much more in line with the real steel version of this magazine.

Available in the:Replica Airguns Store

Pros:

• All metal guns with good overall realistic weights.

• Very heavy blowback on all guns, especially the KP-07 1911

• Excellent fit and finish - best I have seen.

• Nice mid range fps - great for on the field.

• Very consistent accuracy for all KJWorks Airsoft guns.

• Very believable replicas of the real steel versions.

Cons:

• KP-2 and KP-07 did not have official licensing.

• All seem to go through CO2/Gas fairly fast.

• KP-02 had a rather strange looking CO2 magazine.

• KP-02 slide did not lock back after last shot, may be due to CO2 magazine configuration.

Comments:

I guess you get what you pay for, these KJWorks Airsoft guns do fetch a bit higher price but when you take them out of the box and really look at them closely you can see why, they are pretty much flawless and the fit and tolerances are very good with very little play in the mechanical parts. Shooting these guns is just as wonderful, they all worked very well and got consistent accuracy and fps between shots. There where no ammo loading problems and no unexpected behaviors with any of these Airsoft pistols. If you can afford to pay that little bit more for one of these very high quality KJWorks Blowback Airsoft guns, you will not be let down!

Buy the KP-02 Airsoft Pistol in Canada 

Buy Airsoft Guns in the US

Buy the KP-07 Airsoft Pistol in Canada

Buy Airsoft Guns in the US

Buy the M9 Elite 1A Airsoft Pistol in Canada

Buy Airsoft Guns in the US

Type: Pellet & BB air pistol.

Manufacturer:Umarex.

Model:HK P30.

Materials: Metal & plastic construction.

Weight: 1.7 pounds.

Barrel: 3.88 inches, metal rifled.

Propulsion: CO2 x 1.

Action: Semi auto, single and double action.

Ammunition Type: .177 caliber lead pellets & 4.5mm Steel BB's.

Ammunition Capacity: 8 shot pellet rotary magazine & 15 shot inline BB magazine.

FPS: 360/410

Trigger Pull: The trigger pull on the Umarex HK P30 is fairly nice in single action mode while shooting in double action will give your trigger finger a bit of a workout. You can fire off pretty quick in double action but not as fast as with airguns that have a lighter double action.

Accuracy: I shot the Umarex HK P30 at a target from 20 feet away in a semi rested position using both pellets and BB's to see how both ammunitions worked. I was also interested to see if pellets would perform better than the BB's? Using 6.9 grain RWS pellets I was able to get just over a one inch grouping close to the center of the target and also averaging 363 fps with my 5 shot chronograph testing. BB's did get  higher chronograph results as expected with an averaged 415 fps but grouped a bit larger at just under two inches.

Build Quality: This is an extremely well made metal and polymer air pistol with great fit and finish and a nice dense 1.7 pound weight to it. It's another "made in Germany" Umarex that uses the 8 shot rotary pellet magazines but with teh added ability to shoot BB's loaded in the full size drop out magazine? There is plastic on this air pistol but it's in the same places you would find it on the real steel HK P30. The balance, ergonomics and feel this gun offers is as good as it gets.

Realism: The Umarex HK P30 is a licensed replica of the real HK P30 semi auto pistol. It looks almost exactly like the real steel version with the exception of the break in the slide where the rotary magazine is accessible and the smaller .177 caliber muzzle opening.

Purchased From: The Replica Airguns Store.

Pros:

• Rifled barrel for Pellets but can also shoot BB's.

• Full H&K Licensing.

• German made!

• Comes in a nice hard-shell case.

• Full size drop out magazine that holds BB's and CO2.

• Adjustable rear sight for windage.

• Double and Single Action trigger.

• Rail for adding accessories.

• Very nice holding gun, good ball acne and weight.

• Good accuracy and power.

Cons:

• More expensive then many entry level guns but much higher quality.

• Barrel is not recessed at all.

• Did not get a lot of shots form a CO2.

• Trigger is a bit tuff in double action mode.

Comments:

I have had a lot of people ask me to review this air pistol and to be honest I thought it would be just like the other Umarex German made rotary magazine pellet shooters, and that's not a bad thing! But it is different then the rest as it is the only one that also has the ability to shoot BB's by loading up the inline drop out magazine with 15 BB's and fitting the BB adapter where the rotary magazine would normally go. I also really like the look and feel of this gun. It is the perfect size and weight, not too big or small and not to heavy or light. I would really lie to get my hands on the real steel HK P30 to see if it has similar characteristics? If you want the best of both worlds, an accurate CO2 pellet pistol and an action shooting high capacity BB shooter, you can have it all with the HK P30.

Buy Umarex Umarex HK P30 in Canada

Buy the Umarex HK P30 in the US

Type: Airsoft Pistols.

Manufacturer:KWC.

Model:Desert Eagle .50 & Sigma SW40F.

Materials: Metal slide & polymer frame.

Weight: 2.5/1.8 pounds.

Barrel: Metalnon-rifled smooth bore.

Propulsion: 12 gram CO2.

Action: Blowback, single action only.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 21/22 rounds.

FPS: 400/390.

Trigger Pull: The trigger pull for both KWC blowback single action pistols is very good, the Desert Eagle is a bit better with less play and a lighter pull while the Sigma SW40F still feels very good but has a little bit more take up and a slight bit more pull required.

Accuracy: I shot both guns from 20 feet out in semi rested position and got similar results. I was able to place 10 rounds in a 2.5 to 3 inch group and both guns shot well centered. I have full confidence that I could easily hit a man sized target from 50 feet away. Both KWC Airsoft pistols got right around 400 fps (5 shot average chrony testing) with the Desert Eagle only 10 fps higher than the Sigma SW40F and this was using .20 gram plastic Airsoft BB's.

Build Quality: The build quality for both guns is pretty much the same, both have a metal slide and barrel with a polymer frame and plastic grips, the Sigma SW40F had a plastic magazine release and trigger while the Desert Eagle used metal in these parts. The KWC Sigma SW40F seemed to wear a bit better as the painted finish seemed more durable. I found the metal on metal areas on the Desert Eagle where losing the paint and also in some of the high spots. Over all the guns worked very well and had good fit and finish.

Realism: The KWC Desert Eagle .50 and Sigma SW40F are very accurate replicas of their real steel counterparts, with the Desert Eagle also having the full licensing on it for added authenticity. The workings of both Airsoft guns are pretty much just like a real gun with full size drop out magazines and very heavy full blowback operation. The slides on each gun give a nice metallic sound when operating.

Available in the:Replica Airguns Store

Pros:

• Lots of metal and good overall weight.

• Very heavy blowback on both guns

• Good fit and finish.

• Excellent fps.

• Good accuracy with both guns.

• Very believable replicas of the real steel versions.

Cons:

• Paint wear in high spots noticeable on the Desert Eagle.

• Non adjustable sights.

• Both go through CO2 fast.

• No trademarks on the Sigma SW40F.

Comments:

It's wonderful to get these KWC blowback Airsoft guns here in Canada finally and have the ability to review them for everyone. They remind me a lot of the Cybergun 4.5mm Steel BB blowback pistols very much and this is probably because there are Airsoft version of these guns also distributed by KWC. Whether you want one of these very nice Airsoft pistols for plinking and target practice or to use in battle on the Airsoft field, either gun would make a great choice. I am really loving the fact that I now have more guns I can review and Airsoft or 4.5mm Steel BB it really doesn't matter to me, I'm having way to much fun to care ;)

Buy KWC Airsoft Desert Eagle in Canada

Buy KWC Airsoft  Desert Eagle in the US

Buy KWC Airsoft SW40F in Canada

Type: Blank revolvers.

Manufacturer:RÖHM.

Model:Le Petit RG 56 & Little Joe.

Materials: Mostly metal with plastic grips.

Weight: 472/134 grams.

Barrel: Front firing.

Propulsion: Gun powder.

Action: Revolver, single & double action/Single action only

Ammunition Type: .22 caliber crimped blanks (6mm Flobert).

Ammunition Capacity: 7/5 rounds.

FPS: NA.

Trigger Pull: The trigger pull for both ROHM Le Petit and Little Joe blank revolvers in single action is nice and light. The action for both blank revolvers is very solid so cocking both guns requires a firm grip, the ROHM Le Petit also allows for double action shots and while it takes some force, the mechanics are very smooth and you can really feel the German quality in the hammer and trigger.

Accuracy: NA.

Build Quality: Even though both revolvers are made as blank/signal guns and do utilize scaled down metals (not high pressure gun steel), they are made very well and many of the internal mechanical parts, pins and screws are solid steel. The fit and finish is excellent and both guns worked flawlessly for me in my testing.

Realism: Both ROHM blank Revolvers are derivatives of similar real guns (Freedom Arms and RG 22) but again have been made from the ground up to be blank guns and can not be converted in any way shape or form to fire live ammo. The quality and feel is very believable, they also both fire out the front of the barrels and can shoot 15mm flares with the required flare adaptors attached.

Available in the: Replica Airguns Store

Pros:

• Sold metal construction.

• Excellent fit and finish.

• Made in Germany.

• Shoot lesser expensive .22 caliber crimped blanks.

• Can also shoot 15mm flares with appropriate flare adaptor attached.

• Come in gift box with cleaning rod and manuals (Le Petit RG-56 also comes with flare adaptor)

Cons:

• Real wood grips would have been a nice touch but could be added later.

• Little Joe does not come with a flare adaptor.

Comments:

We now have some blank guns that seem to be somewhat available in Canada... At least for now! And even though some of the other blank guns I was selling may have been more to the liking of the folks that where looking for a semi auto styled blank gun, the good news is both of these guns are very high quality and revolvers in general are very dependable. I also like the fact that both of the ROHM Blank Revolvers are fairly compact and so if you want to take them with you out on a hike or in the back country, they will not take up much room or add too much weight, but are still ready if required to scare off something bigger or more dangerous than you!

Buy the ROHM Le Petit RG-56 Blank Revolver in Canada

Buy the ROHM Little Joe Blank Revolver in Canada

Type: BB air pistol.

Manufacturer: UmarexUSA.

Model: Beretta 90two.

Materials: Metal and plastic construction.

Weight: 1.2 pounds.

Barrel: 5 inches, non-rifled.

Propulsion: 12 gram CO2.

Action: Single & double actions.

Ammunition Type: 4.5mm steel BB's.

Ammunition Capacity: 21 rounds.

FPS: 375+ fps.

Trigger Pull: The trigger pull on the Umarex Beretta 90two is respectable in both single and double action, I found the 90two to be good shooting in both actions but preferred the feel of single action for more precise shooting. In double action you fire off a lot of shots quickly but the trigger is fairly long so you need to use a full pull or you may miss a shot here or there.

Accuracy: The results I got shooting my 8 round group from 20 feet out where excellent, coming in at just under a 1 inch group which is about as good as you can expect from a BB pistol of any quality. I also got well over the factory claimed 375 fps at an average of closer to 400 feet per second.

Build Quality: The Umarex Beretta 90two does use both plastic and metal in its build with an all metal slide and feels solid in the hands but I feel it would of felt even better if it had a another half pound to it or so. I had no problems with it in terms of function and the fit and finish where very good but there is always that feeling you get when you hold something with some weight to it in your hands. I do have to credit Umarex for working in a moveable slide and full size drop out magazine.

Realism: The Umarex Beretta 90 two is very realistic and includes Beretta licensing and markings throughout. As mentioned before, the moveable slide and full size drop out magazine along with the recessed barrel makes this air pistol version look very close to the real steel Beretta 90two. The only real giveaways are the exposed CO2 tab on the bottom of the magazine and the somewhat out of place safety switch on the right side of the gun.

Available in the:Replica Airguns Store

Pros:

• Has metal working slide.

• Full size drop out magazine that holds BB's and CO2.

• Full Beretta Licensing and markings.

• Single and double action trigger.

• Rail for adding accessories.

• Above claimed fps with good usage of CO2 and excellent accuracy.

Cons:

• Gun could be a bit heavier for added realism.

• Non adjustable sights.

• CO2 tab is plastic and exposed.

Comments:

Right off the bat I have to say the Umarex Beretta 90two is a step up from the Elite II, not that there is anything wrong with the Elite II, but given the choice I would go with the Beretta 90two as it's simply a more realistic version of the Beretta 92 with its working metal slide and full size drop out magazine that holds both the BB's and CO2 in it. On the performance side of things, the Umarex Beretta 90two also met or exceeded my expectations so the 90 two is not just built for show. If your a beretta fan looking for a realistic Beretta styled air gun and don't want to spend the big bucks for the all metal German made Umarex version, then the Beretta 90two is an excellent option to consider adding to your collection or even as a first time BB gun purchaser!

Buy Beretta 90two in Canada

Buy Beretta 90two in the US

Type: BB air revolver.

Manufacturer: UmarexUSA.

Model:Smith & Wesson 327 TRR8.

Materials: Mostly metal with some plastic construction.

Weight: 2.3 pounds.

Barrel: 6 inches, non-rifled.

Propulsion: 12 gram CO2.

Action: Revolver, single & double actions.

Ammunition Type: 4.5mm steel BB's.

Ammunition Capacity: 6 rounds.

FPS: 400fps.

Trigger Pull: The trigger pull on the Umarex Smith & Wesson 327 TRR8 is good in both single and double action, I wouldn't say it isn't supper light in either action but pretty decent overall. I found shooting in single action to be the most precise as the release point is instant. Shooting in double action was also fairly predictable.

Accuracy: The results I got shooting my 6 round group from a 20 foot out position where none other than impressive and I would have to say the 327 TRR8 shot the best group (just over a 1/2 inch) I have ever recorded using 4.5mm steel BB's. I'm not even sure if I have bettered these results using pellets from a rifled barreled pistol? This goes to show you how well an accurate BB gun can perform when shooting from a reasonable distance.

Build Quality: With the Umarex S&W 327 TRR8 Revolver being mostly metal, you would expect it to have a decent build quality and I am happy to say it does. Everything looked and fit well, the CO2 Revolver had good heft to it and I had absolutely no problems shooting this gun. My only real reservation is the plastic CO2 screw tab but so far with my other guns that have the same type of tabs, they are holding up well.

Realism: The Umarex Smith & Wesson 327 TRR8 is very realistic in terms of looking and operating as a revolver with it's brass shell casings you load juts like a real revolver, so yes it feels realistic and even looks a lot like a S&W 327 TRR8 to some degree. With that said, Umarex has taken some liberty on this one most likely because it is built off an existing airgun frame and to make it into a true 327 TRR8 replica would have required a complete redesign. I would have to say the Umarex S&W M&P R8 is actually a closer 327 TRR8 Replica than the gun reviewed in this video.

Available in the:Replica Airguns Store

Pros:

• It's a revolver with actual shells! Gives you the feeling of loading and shooting a real revolver.

• Almost all metal design.

• Lots of detail in this gun, very well made, fit and finish is excellent.

• Excellent power, accuracy and shots per CO2.

• Adjustable fiber optic sights.

• Lots of places to mount accessories.

Cons:

• Plastic CO2 screw tab could cause problems down the road?

• Only shoots BB's - why not make a pellet version with a rifled barrel?

• Actually shoots 6 rounds not 8 like the real version of this revolver.

Comments:

What's not to like about this Umarex Smith & Wesson Revolver? It's built very well, it most certainly looks good, it has the best tested accuracy I have seen so far from a BB gun, it shot even higher velocities than claimed, it gets tons of shots from a single CO2, and it loads up just like a real steel revolver but at a fraction of the cost to shoot! If you want to customize yours you have plenty of options with two weaver mounts top and bottom and it comes in at a very reasonable price tag!

Buy S&W 327 TRR8 in Canada 

Buy S&W 327 TRR8 in the US

Type: Pellet air pistol.

Manufacturer:UmarexUSA.

Model:Browning Buck Mark URX.

Materials: Metal & plastic construction.

Weight: 1.5 pounds.

Barrel: 5.25 inches, metal rifled.

Propulsion: Spring piston.

Action: Break barrel, single action only.

Ammunition Type: .177 caliber pellets.

Ammunition Capacity: 1 pellet.

FPS: 320fps.

Trigger Pull: The trigger pull on the Umarex Browning Buck Mark URX is not too bad but I feel it is a bit heavier than the claimed 5.75 pounds. In comparison to my real steel 22LR Buck Mark, the trigger is much heavier but then again my 22LR trigger is what I would consider to be near perfection. I was able to work with the trigger as is but found I was expecting the trigger to release earlier then it actually did and I needed to apply just a bit more force than I would have liked to. Even so, with a bit of practice I was able to nail my shots.

Accuracy: Wow is all I can say, you will need to work withe the Umarex Browning Buck Mark URX a bit to get used to where the trigger breaks but once you dial it in this airgun is a tac driver. I decided to go with a non-magnified NcSTAR Ultra Compact 1x25 Red/Green Dot Sight and found it worked well with this Buck Mark pellet shooter. From 30 feet out I was able to land 4 shots pretty much right on top of each other and ended up with an under 1 inch 5 shot group, and keep in mind that I was only using a standing but rested stance (non braced).

Build Quality: Considering the very low price tag for this pellet shooting Buck Mark Replica, I was not expecting it to be as well constructed as it was, there is a decent amount of metal in teh URX giving it a nice 1.5 pound heftiness to it and the rubberized grips make this air pistol feel much more expensive than it is. My only concern is the hinge area in the break barrel portion of the gun, once cocked there seems to be some play that could effect accuracy down the road when wear appears. But once locked back into the closed position the play is all but eliminated.

Realism: The Umarex Browning Buck Mark URX is a licensed replica of the actual Browning Buck Mark 22LR semi auto pistol. Umarex did a great job making this break barrel pistol look very close in most ways to the actual Browning Buck Mark URX with the exception of the lever required to cock the spring that is located just under the back of the barrel. The barrel itself is also a tad bit long but I am sure this helps when cocking to get a bit more leverage. When you consider this is a single shot break barrel pellet shooting version, it looks pretty authentic and most importantly it feels very similar to the real 22LR version which makes it a great off range alternative for 22LR Buck Mark owners.

Available in the:Replica Airguns Store

Pros:

• Very decent Browning Buck Mark Replica!

• Feels very well built overall for a low cost airgun.

• Excellent accuracy once you spend a bit of time with it.

• Got much better than claimed fps.

• Has a built in rail for an added sight system.

• Awesome rubberized grip texture.

• Ergonomics are much like the real Buck Mark making this a great off the range substitution for the real 22LR pistol.

• Very low price tag.

Buy Browning Buck Mark URX in Canada 

Buy Browning Buck Mark URX in the US

Right off the bat I have to say I had a great time making this Field Test Video Review of the RAP4 RAM X50 (Sig P226) .43 Caliber Blowback Paintball Pistol. I did something I don't generally do, I went back into my forest area of the property and setup some human sized targets (5 gallon buckets) and did some tactical real world shooting simulation, it was a lot of fun and the RAP4 RAM X50 Paintball Pistol worked perfectly for this as I could very easily see exactly where I was shooting and also did not have to worry too much about rebounding ammo.

This video only covers the shooting performance of the RAP4 RAM X50, so checkout my Table Top Review for things like the Specifications and Features.

In this video I start out by doing a Chronograph Test and shoot not only Paintball rounds but also some Rubber bullet and got very good average FPS results using both ammo types (288 fps using .43 caliber Rubber Balls and 279 fps using .42 caliber Paintballs).

I also tested the accuracy out from 20 feet away in a semi rested position and got about an 8 inch group with a full 9 round magazine, which on a human sized target would do the trick for sure. Keep in mind this is not a target pistol! My Tactical Field or should I say "Forest test", showed that this paintball pistol performs very well when used in a simulated shooting scenario.

I can really see a use for a gun like this, mainly for training oneself on how to acquire targets quickly and how to improve your tactical shooting skills.

Buy RAP4 Paintball Guns in Canada   -   Buy RAP4 Paintball Guns in the US

Type: Airsoft Rifle.

Manufacturer:ASG.

Model: ASG AW .308 Airsoft Sniper Rifle.

Materials: Metal & plastic.

Weight: 6.61 pounds.

Barrel: 19 inches, smooth bore.

Propulsion: Spring.

Action: Bolt action single shot.

Ammunition Type: Airsoft 6mm Plastic BB's.

Ammunition Capacity: 28 rounds.

FPS: Up-to 449.

Trigger Pull: The trigger pull on the ASG AW .308 Sniper Rifle is very nice, there is very little play, once the trigger safety is flush the release is almost instant and the pull is very light but not so light that you would accidentally shoot it.

Accuracy: Being an Airsoft Rifle and a Sniper rifle in one made me wonder if you could actually get a tight grouping at longer distances? I'm sure hitting a human target at 60 feet shouldn't be too hard but what about a pop can consistently? With a bit of fine tuning I was able to get a 2 inch grouping at 60 feet out using a rested position. And with the Hop-up dialed in, my aim point was the same at 30 feet as it was at 60 feet as a result of the backspin keeping the trajectory even all the way out.

Build Quality: The ASG AW .308 is not over the top price wise so I was not expecting it to be built like a Sherman tank. It is however solid enough but also light enough to use in the field without having to lug around too much extra weight. Most of the parts that you want to be metal are metal including the barrel, bolt & receiver, trigger, magazine, strap rings and rial system. The stock is of course plastic with some added rubber and seems to be hollow in parts which I am assuming is what keeps this rifle on the lean side.

Realism: Without actually having handled a real AW .308 Accuracy International England Sniper Rifle, it's hard to say how spot on it is but it does look very similar to the photos I found online with the exception of the magazine being further forward on the stock. It is a nice touch that the actual Accuracy International England licensing is also on the ASG AW .308.

Available at the:Canada Replica Airguns Store.

Pros:

• Extremely fun to shoot (Even though it's not a semi or full auto gun).

• No CO2 or batteries required, ready when you are.

• Excellent accuracy at most ranges.

• Very nice trigger.

• Good power.

• Good use of metal parts.

• Will not break the bank.

Cons:

• Does not come with a sighting system so you need to buy something to shoot it.

• Light Airsoft BB's will not give you good results, use high end heavy Airsoft BB's for best results.

• Stock looks adjustable but is not, was not a problem, everything felt good!

• Some things are not explained in the manual?

Comments:

I thoroughly enjoyed reviewing this Airsoft rifle, you would think that a full auto gun would be so much more fun to shoot and don't get me wrong they are fun to shoot, but there is something to be said about setting up a target well down range, getting into position to take the shot and slowly squeezing off one well placed round! And of course hitting the target. I really like the fact that all you need is a bunch of Airsoft BB's and you're ready to go, no CO2, no dead batteries to deal with. Every time a do another Airsoft review I am impressed with how well these guns shoot and how accurate they are! The ASG AW .308 took this to an even higher level and also showed me that an Airsoft BB can pack some real punch to it. All in all it was a good day and I have a feeling when I get the urge to fire off some well placed rounds just for fun, this rifle is going to get picked more often than not.

Buy AW .308 Airsoft Rifle in Canada

Buy AW .308 Airsoft Rifle in the US

Type: BB air pistol.

Manufacturer: Daisy.

Model: Powerline 5501.

Materials: Mostly metal.

Weight: 1.44 pounds.

Barrel: 4 inches, smooth bore.

Propulsion: CO2.

Action: Semi auto, blowback, single action.

Ammunition Type: Steel BBs 4.5mm.

Ammunition Capacity: 15 rounds.

FPS: Up-to 430.

Trigger Pull: The trigger pull on the Daisy Powerline 5501 is about average, a bit long but fairly smooth and about a medium pull weight. The first part of the action loads a BB into the chamber and the second part releases the hammer which give the pistol a bit of a creepy first stage.

Accuracy: I was not impressed with how my Daisy 5501 performed in the accuracy portion of this review, it got about a 3 inch 8 shot group from 20 feet out in a semi rested position, in comparison many of my BB pistols can easily get a 1 inch grouping shooting this way. I may try a different brand of BB's even though the RWS BB's I used where of high quality, they just may have not suited this pistol? FPS velocities where a bit under the manufacturers claimed ratings but very close at a respectable average of 386 fps with my 8 shot test shooting on a somewhat cold day. Not bad for a blowback pistol!

Build Quality: The Daisy Powerline 5501 is a pretty much all metal pistol with what looks to be very good build quality. The 5501 is made in Japan, I have found most Japanese made guns to be well made in the past. The frame, slide, trigger, safety, slide catch, CO2 screw, and de-cocker are all metal and of course many of the internal parts too. The only plastic parts to speak of are the grips and the magazine. I would have liked to have seen the magazine with more metal in it but for the most part it is protected within the gun so you should be OK.

Realism: The Daisy Powerline 5501 is loosely styled after the Sig Sauer in combination with a Walther semi auto pistol. It is lacking a cut-out ejection port that would have added greatly to its realism. I would have also liked to have seen a metal magazine as it's seems a bit cheap compared to the rest of the pistol. I do like the fact that the barrel tip has a large diameter opening making the gun look more like the larger caliber weapon it is styled after. It's also one of the few BB pistols with a working de-coker on it.

Available at:Replica Airguns Store US.

Pros:

• Lots of metal in this gun!

• Nice hard blowback.

• Good fps velocity and decent shots per CO2.

• The two-tone look is very nice with a stainless look to the frame.

• Accessory rail makes adding a tactical light or laser easy.

• Warning instructions on slide are color matched to be more discreet.

• Very well designed CO2 tightening system and also well hidden.

Cons:

• Did not shoot very accurately for me with the BB's I used.

• Ejection port is not cut out, takes away from the realism a bit.

• All plastic magazine.

• No white dotes on rear sight.

Comments:

All in all I liked this Daisy Powerline 5501, other than the poor results I got in terms of accuracy using my chosen zinc platted RWS BB's, the Powerline 5501 was really very good in all other aspects. I think it is a rather nice looking gun with excellent build quality throughout with lots of metal giving the 5001 a nice 1.5 pounds weight. The Daisy 5501 had very heavy and snappy blowback while retaining decent shots per CO2 and respectable close to 400 fps real world velocities. This Daisy Powerline 5501 blowback BB pistol is priced at well under $100 making it very good value in my mind.

My Vimeo Video Comparison Review for the Daisy Powerline BB Pistol:

Buy the Daisy Powerline 5501 in the Canada Store

Buy the Daisy Powerline 5501 in the US

Type: Blank Gun.

Manufacturer:UMAREX USA.

Model:SW1911 S

Materials: Mostly Metal with rubber grips.

Weight: 2.2 pounds.

Barrel: Top venting with fully plugged barrel.

Propulsion: Gun powder.

Action: Single action only.

Ammunition Type: 9mm P.A.K.

Ammunition Capacity: 8-10 rounds.

FPS: N/A.

Trigger Pull: The trigger pull on the Umarex SW1911 S is actually fairly heavy which I found a bit surprising because it is a single action only gun. I found myself thinking a few times that the gun may have misfired but realised that I just needed to pull the trigger a bit firmer. This can be good in that the gun will not easily or accidentally go off and since accuracy is not a factor it is not a big deal.

Accuracy: NA.

Build Quality: The overall build quality of the SW1911 S is fantastic. It is one of the nicest blank guns in terms of overall build quality and finish quality. The tolerances are very tight and the quality of the workmanship is top notch. When holding the Umarex SW1911 it has a lot of mass to it and feels just like a real 1911 in the hand. This blank pistol is made in Germany!

Realism: The Umarex SW1911 S is a replica of a Smith and Wesson 1911 semi auto pistol but I could not find an exact match to a specific model they currently make. It is licensed and branded by Smith & Wesson and in terms of looking like a real steel gun it is bang on with the exception of the exhaust notch that is cut into the top of the slide. Interestingly enough I think Umarex may have not even needed to cut out this notch as my slow motion video shows that all the burn off happens before the slide even starts to move.

Purchase from: The US Replica Airguns Store.

Pros:

• Very well made, materials fit and finish is all very good.

• Two-tone finish looks very nice.

• Very true to the original 1911 - (A1 styled).

• Love the nice rubber wrap around grips.

• I was able to fit 10 rounds in the magazine (2 extra)!

• German made quality.

Cons:

• Top venting.

• Notch cut out of slide takes away from the realism a bit.

• Magazine can be a bit tuff to get in (pressing the magazine release helps).

• Heavy trigger pull on mine.

Comments:

Even though the Umarex SW1911 S had a few shortcoming like being a top venting gun, having the notch cut out of the slide and perhaps a bit heavy of a trigger, I still really like it! The quality is evident throughout this fine German made blank gun and you can just tell it's made right. This is also my first true replica blank gun as it is fully licensed by Smith & Wesson, something that has been lacking in all my other blank guns because of our Canadian importation laws. I really wish I could get my hands on some more "replica blank guns" as I don't mind giving up the front firing for top venting to obtain a blank gun that is a true replica.

Buy Blank Guns in Canada 

Buy Blank Guns in the US Store

Type: Pellet/BB Multi-pump Air Rifle.

Manufacturer:Crosman.

Model:M4-177.

Materials: Plastic with some metal.

Weight: 3.6 pounds.

Barrel: 16.75 inches, rifled.

Propulsion: Multi-pump.

Action: Single shot - bolt action with manual advance magazine.

Ammunition Type: .177 caliber pellets & 4.5mm steel BB's.

Ammunition Capacity: 5 shot pellet magazine - 18 shot BB internal BB magazine - 350 round BB hopper.

FPS: Up to 495 in Canada and 600 fps in the US.

Trigger Pull: The trigger pull on the Crosman M4-177 is medium length and fairly light. The trigger mainly releases the bolt so no pre-cocking is required. It takes a bit to get used to where the release point since there are no real warning indicators. The trigger is plastic but seems to work just fine as there is no real load on the trigger when shooting.

Accuracy: I found the Crosman M4-177 Air Rifle to be a very good shooter, getting about a 3/4 inch grouping from 30 feet out in a semi rested position (sand bag up front, standing in the back). I also put 3 rounds through my Chrony Chronograph and the M4-177 averaged about 410 fps with the 10 pump maximum which is about what I would expect from the Canadian detuned version, keep in mind the US non-detuned version shoots up in the 600 fps range so it would have been nice if the Canadian version got closer to our legal non-registered limit of 500 fps.

Build Quality: The Crosman M4-177 Multi-pump Air Rifle is mostly plastic which some of my viewers will not like, but for a sub $100 Replica Air Rifle it hits the mark in terms of affordability and if it was an all metal airgun you would more than likely expect to double the price tag - if not more! Even though plastic is used throughout the Air Rifle, there are some internal metal parts where they need to be, the fit and finish is very good and I do not get the feeling that the Crosman M4-177 is cheaply made in any way.

Realism: The Crosman M4-177 is a respectable M4/AR replica. It is not exact in terms of true dimensions as the forward stock is a bit long to accommodate the pumping mechanism, (kind of long like the original AR but without the tapering). Crosman did a good job to add all the parts that you would find on a real M4/AR even if they are simply for show and are molded into the plastic. I particularly like the removable iron sights and full rail for mounting a scope or red dot sight. I am also really glad to see a Replica Assault rifle on the market as so few of them are available in pellet or steel BB shooters.

Available in the: Replica Airguns Store.

Pros:

• One of the few replica Air Rifles on the market (MP5K PDW & Mini UZI).
• Very well priced.
• Excellent accuracy!
• Comes with detachable and adjustable iron sights.
• Fully adjustable stock.
• Picatinny rail on top for just about any type of sight system.
• Option of shooting pellets or BB's.

Cons:

• Mostly plastic build.
• Lower rails you just can not use as the pumping action gets in the way?
• FPS is well below the Canada non PAL limit of 500 fps so maybe a bit too detuned?

Comments:

The Crosman M4-177 Multi-Pump Pellet/BB Air Rifle is in my opinion a must have air rifle, simply because... why not? How many replica pellet and steel BB shooting air rifles are there out there and for under $100 to boot? What the M4-177 lacks in metal parts, it makes up in accuracy and fun factor. And the M4-177 really is not a bad replica in terms of realism as Crosman made it a point to copy the real steel M4/AR fairly closely. I know for a fact from the emails I received and YouTube comments that many people have been looking for an M4/AR styled Air Rifle and Crosman has now delivered one to us so what are you waiting for ;)

Buy Air Rifles in Canada 

Buy Air Rifles in the US

Type: BB air pistol.

Manufacturer:UmarexUSA.

Model:Browning Hi-power Mark III.

Materials: Plastic (polymer) and some metal construction.

Weight: .92 pounds.

Barrel: 4.5 inches, metal smooth bore.

Propulsion: 12 gram CO2 x 1.

Action: Semi auto, single and double action.

Ammunition Type: 4.5mm steel BB's.

Ammunition Capacity: 18 shot full size drop out magazine.

FPS: 410.

Trigger Pull: The trigger pull on the Umarex Browning Hi-power Mark III is not too bad but has more resistance when the BB magazine is full as the first part of the trigger pull is dedicated to advancing a BB into the BB chamber, this is true in both single and double action. Shooting the Browning Hi-power in single action mode is a bit smoother but also has some resistance right at the beginning. Overall I would say it has a medium pull and as you can see in my shooting results the trigger did not effect the accuracy negatively at all!

Accuracy: Excellent for a BB shooter I shot a 1 inch 7 shot group from 20 feet out in a semi-rested position and this is was with open sights! I also shot freehand in double action, shooting quickly and also got a very respectable 2.5 inch pattern that represented an additional 36 shots. When it came to FPS performance the Umarex Browning Hi-power Mark III was a bit lower than claimed which is not unusual with most airguns (369 fps averaged 8 shots). The Umarex Browning Hi-power did get well over 100 shots per CO2 but I would have given up a few shots for a bit more power.

Build Quality: I would have liked to have seen this air pistol replica use a lot more metal and perhaps some more working parts. As is it is mostly plastic and very light weight but the fit and finish are good overall and the gun should work just fine and hold up over time.

Realism: The Umarex Browning Hi-power Mark III is a licensed replica of the actual Browning Hi-power Mark III semi auto pistol. It is a very close "looking" copy in almost every way. I like the fact that there are no side screw holes that you find in many plastic moulded BB pistols and the Browning Mark III has a working ambidextrous safety and magazine release just like the real Browning Hi-power Mark III. The let down here is in the .92 pound weight of the Browning BB version, it just doesn't have that "gun like" weight to it which makes it feel a bit cheap. I would have really liked to see this BB pistol in all metal and with a working slide, and I would not have minded to pay extra for the upgrade in materials.

Available in the:Replica Airguns Store

Pros:

• Non of those side assembly screw holes which are a dead giveaway that it's an airgun.

• Feels well built even though it is a bit light weight.

• Inexpensive but has good fit and finish.

• Trigger and hammer are metal.

• Excellent accuracy and decent power.

• Full size magazine that is very easy to load.

• Very good replica of the actual Browning Hi-power Mark III.

• Single and double action trigger.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Mostly plastic which makes the gun feel kind of light weight.

• No working slide.

• Could have just a bit more power even at the expense of less shots per CO2.

• No white dots on the sights?

Comments:

The Umarex Browning Hi-power Mark III BB CO2 pistol is a very good replica of the real steel version of this gun and in terms of "looks" alone does a good job making this pistol very believable. Now once you pick it up, you know it's not the real deal because of the plastic build and much lower weight. So with that out of the way, let's talk a bit more about what I did really like about the Browning Hi-power Mark III! I liked the excellent accuracy, easy to load and use full size drop out metal magazine not often found in a low price airgun like this, and I also like the fact that there are no screw holes on the side of this gun found in so many plastic and even some metal BB guns. So overall the Browning Hi-power Mark III is a good overall replica, has excellent accuracy and is really the only Browning Hi-power available in an airgun that I know about.

My Vimeo Table Top & Shooting Review for the Browning Hi-power Mark III BB CO2 Pistol:

Buy BB Pistols in Canada   -   Buy BB Pistols in the US

Photo of Zoarki 917 Removed by Request from Glock "Renzulli Law Firm"

All references, photos and video claiming that any item in this Review/Video looks like a Glock or is a Replica of a Glock in any way shape or form have been removed from this post as requested by Glock"Renzulli Law Firm"

Type: Blank Gun.

Manufacturer: Zoraki - ATAK Arms

Model: Zoraki M917

Materials: Metal slide, Polymer frame.

Weight: 1.91 pounds.

Barrel: Semi plugged - front firing.

Propulsion: Gun powder.

Action: Single action.

Ammunition Type: 9mm P.A.K.

Ammunition Capacity: 17 rounds.

FPS: N/A.

Photo of Zoarki 917 Removed by Request from Glock "Renzulli Law Firm"

Trigger Pull: The trigger pull has a medium pull and also has the built in trigger safety found on the real NAME REMOVED. There is also a grip safety that is used in combination with the trigger safety giving the Zoraki M917 a double safety system.

Accuracy: NA.

Build Quality: The overall build quality of this gun is excellent. The design and materials all seem to be of good quality as is true with all of the Zoraki blank guns. Out of all the blank guns I have reviewed the Zoraki gun materials and workmanship are closest to what you would find on real steel guns.

 Photo of Zoarki 917 Removed by Request from Glock "Renzulli Law Firm"

Realism: This gun is not "supposed" to be a replica of any gun in production but it does look amazingly similar to a NAME REMOVED semi auto pistol. The Zoraki M917 is different in that it has the double safety system with the extra grip safety on the back of the grips. The take down switch is also more like what you would find on a Walther series pistols but it makes for very easy field stripping!

Supplied on loan for review.

Photo of Zoarki 917 Removed by Request from Glock "Renzulli Law Firm"

Pros:

• Excellent construction, built pretty much just like a real NAME REMOVED.

• Front firing and flawless performance.

• Interesting double safety system.

• Super easy to field strip.

• High capacity magazine.

• Come with a very nice hard shell case and accessory package.

Cons:

• Not available in Canada at this time:(

• NAME REMOVED users may not like the double safety system.

Comments:

The Zoraki MOD 917 is another very fine blank gun from Zoraki (ATAK Arms) which is exactly what I expected it to be! It is a real shame we can not import blank guns in Canada at this time and also the recent prohibition of several of the Zoraki blank gun models like the R1, M914 and M925. Make sure to watch my YouTube video on the Zoraki M917 for more information on what is happening in Canada with blank related importation. If you're are lucky enough to live in an area like the US or other parts of the world where your government does not treat you like a small child, then you can have one of these beautiful blank shooters!

Buy Blank Guns in Canada

Buy Blank Guns in the US

Type: Airsoft.

Manufacturer:King Arms.

Model:Colt M4A1 Metal AEG.

Materials: Metal & Nylon.

Weight: 6 pounds.

Barrel: 15 inches, metal.

Propulsion: AEG

Action: Semi/full auto, single action.

Ammunition Type: 6mm Plastic BB (recommended .20 gram plus).

Ammunition Capacity: 300+ round magazine.

FPS: 450.

If you haven't already checked out my King Arms Colt M4A1 Table Top Review, make sure to do so for all the details and specifications on the King Arms Colt M4A1 Airsoft AEG Carbine.

This Field Test Review focusses primarily on how the AEG  M4A1 performs in feet per second velocity using .25 gram plastic Airsoft BB's, its accuracy in both semi and full auto and of course my comments on it's shoot-ability and overall performance.

For this field test review of my King Arms M4A1 Airsoft rifle I switched from the .20 gram Airsoft BB's to heavier .25 gram plastic BB's. I did this to have a comparison between the two weights since I had already Chronographed and accuracy tested the .20 gram BB's. As expected the fps dropped a bit, down to around 380 fps but still stayed very consistent for me as would be expected with an AEG styled rifle.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Another reason I wanted to test out the heavier .25 gram Airsoft BB's is because generally speaking, heavier BB's will shoot a bit more accurately as they are not as effected by the higher fps this guns is capable of shooing. The .20 gram BB's actually did well so I had high expectation for the .25 gram BB's and I was not disappointed! For this test I shot the King Arms Colt M4A1 from 30 feet out in a semi rested position (rested on a sand bag in the front and standing in the back). I shot 10 rounds in semi auto and got a very respectable 1.5 inch group which rivals any airgun in my collection! I also shot in full auto (I can't really tell you how many rounds ;) and the King Arms Colt M4A1 punched a nice 2 inch hole in the target. I would almost say it even beat out my other full auto 4.5mm steel BB shooting guns in terms of how tight of a group it can shoot while in full auto mode.

I am sure the Airsoft Hop-up system has something to do with the accuracy as the back-rotating BB's should keep a truer trajectory. One thing I notice while shooting this AEG styled Airsoft rifle, is that there is a slight delay from the time you pull the trigger till the shot is released. The trigger is actually activating a motor which in turn pulls the internal spring back, which then releases it once it hits the end of it's cycle. It's not a long delay but it is noticeable. In full auto it really does not matter at all :)

All in all I am again impressed with what an Airsoft gun can do in terms of both looks and performance.

My Vimeo Field Test Review for the King Arms Colt M4A1 6mm AEG Airsoft Carbine:

Buy this Airsoft rifle in Canada   -   Buy this Airsoft rifle in the US