Trigger Pull: The trigger pull on the ZMZ Tyrex PPA-K-01 is a bit on the heavy side even though it is single action only. In full auto mode this doesn't really matter too much, but in semi auto the heavy trigger can slow down how fast you can shoot your followup shots. You quickly forget about it though because you are having so much fun shooting the Tyrex :)
Accuracy: I was very impressed with the Tyrex PPA-K-01 BB machine guns accuracy in both semi and full auto. I was actually expecting it to do poorly in this area because of the sights, they are inverted or in other words when you are shooting with the stock open, the peep sight would be best suited and when shooting with the stock folded, the pistol "V" sight would be best suited. Unfortunately the setup is backwards on the BB gun version, perhaps a mixup in manufacturing? I may attempt to switch this around at some point. Even with hard to use sights, the Tyrex shot a 1.5 inch 8 shot group in semi auto from 20 feet out and a very respectable full auto burst grouping.
Build Quality: The ZMZ Tyrex PPA-K-01 is not going to win any beauty contests and it's a bit rough around the edges but everything about it is made to last. It's virtually all steel with the exception of the grips and when I say steel, I mean the real hard stuff they put in actual firearms. You won't find any zinc in this BB gun! The Tyrex feel solid and tight with no slop in the moving parts at all, and when you shoot it, it feels like the real thing, minus the loudness and extra recoil of course.
Realism: The Tyrex PPA-K-01 is a very close copy of the Kedr PP-91 (9 x 18 mm Makarov) which is also made in the Russian ZMZ factory. You can tell them apart visually by the grips but other then that they are virtually the same! Based on the quality of the steel used in this gun I would bet money that the BB gun version is made in the same assembly plant and using the same steel.
Purchased From: Private sale
Pros:
All "Steel" construction - Good weight and very solid gun.
Fit of the parts is very good.
Heavy blowback action.
Semi and full auto selectable with a nice high rate of fire in full auto.
Good accuracy in both semi and full auto.
Very Accurate Kedr PP-91replica.
Pretty easy operation.
The folding stock works very well and is very secure.
Not too bad amount off shots for this style - About 2-3 25 round magazines.
If you can find one you will be the only kid on the block with a Tyrex for sure!
Peep and "V" sight should be the other way around.
CO2 access can be a bit finicky and be very careful when removing it!
Finish is a bit rough but about what you would expect from many Russian made guns.
Supper hard to find and if you do find one you will pay a lot of money for it.
Comments:
I have been wanting to get my hands on the ZMZ Tyrex PPA-K-01 BB machine gun for some time now and I was willing to pay dearly for it! I am very happy with this purchase not just as a collector piece but one that I plan to take out and shoot often. Here in Canada the real version of this gun is completely unobtainable so this will have to do and even better yet I can shoot it in my backyard! The Tyrex PPA-K-01 is very pleasing to shoot and sounds more like a suppressed real gun then a BB gun adding to the enjoyment of shooting the Tyrex. Perhaps one day I'll swap the rear sight around and really see how well this BB gun shots?
My Vimeo Video Review for the ZMZ Tyrex PPA-K-01 4.5mm BB shooting machine gun:
If you haven't already checked out the main review for the RAP4 - RAP5 BB Machine Gun then make sure to read it also. This "update review" is to cover a few extra things that I didn't include in the main review like a comparison of the RAP5 to my Umarex MP5K PDW and some more video of the RAP5 shooting some cans in full auto and recorded in slow motion.
I have also had some more time to play around with the RAP5 BB gun and get an idea of how many shots you can expect using the dual 12 gram CO2 adaptor and I also tried putting two BB's inside one shell to see how 42 rounds would work shooting in full auto.
Trigger Pull: The trigger pull on the Real Action Paintball RAP5 feels kind of like an on/off switch, even though it is not an electronic switch it kind of feels like one a bit and it seems to need some CO2 or Air pressure in order to operate. Once the pressure is there, you can engage the trigger. The trigger is fairly short and nice and light.
Accuracy: I was pretty impressed with the RAP5 BB machine guns overall accuracy. I did not have to play around to much with my Red Dot scope to get it on target and keeping it on target is easy to do in both semi and full auto modes. I was especially impressed with how well it stayed on target in full auto mode. I like the fact that it pumps out BB's very quickly and they go exactly where you want them too go.
Build Quality: I was very impressed with the overall build quality of the RAP5, it has lots of metal parts exactly where they would be metal on the real MP5 giving the RAP4-RAP5 BB machine gun a very solid feel. Even the magazines feel solid and are made with metal. I was bit concerned about how the RAP5 would feed and shoot the BB & casing combination but it really seemed to work well and the combined full auto and ejecting casings makes the RAP5 a total gas to shoot!
Realism: The RAP5 BB machine gun is extremely realistic, you can even mix and match real H&K MP5 accessory parts! The only way you can tell its not the real steel is the small ejection port where the .43 caliber casings fly out, and they really come out with some momentum! Other then that this BB machine gun is very realistic in how it operates, looks and feels.
Ejecting casings makes for a realistic experience.
Semi and full auto selectable with a nice high rate of fire in full auto.
Can customize with actual MP5 add on parts. (stocks, rails, grips)
Good accuracy even in full auto mode.
Can use either CO2 or bulk-air power sources.
Decent 400fps for a full auto machine gun.
Cons:
Not a cheap gun!
Hunting down the ejected casings can be a bit of a chore but they are not expensive to buy.
.43 caliber ejection port on the side is a bit of a giveaway.
Would have liked more options of power-sources when purchasing. (Dual 12 gram CO2 adaptor should come standard)
Comments:
When I heard about this BB machine gun, I new I had to have it and mostly because of the way it feeds and ejects the shell casings, much like a real gun! I'm also a big fan of the H&K MP5 styled rifle and PDW version. I was genuinely impressed with everything about this BB shooter; design, quality, realism and shoot-ability and I hope to one day get the RAP4 (M4 styled) version of this gun which uses the same feeding mechanism. If you want the most realistic looking and operating full auto 4.5mm BB machine gun you can get then this is really it.
Trigger Pull: The trigger pull on the ISSC MK22 is fairly short with a bit of noticeable break point in it but overall is pretty light. I get the feeling that this may be a striker based action because of the slight tension before the release.
Accuracy: I put about 300 rounds through the ISSC MK22 and took some time getting used to how it felt and also sighting in the sights on my 4 power scope. Once I felt comfortable I setup a new target and placed a full magazine (22 shots) all with in a 2 inch group from 20 yards out (60 feet). I was in a seated position using and elbow based rest. I was very happy with these results.
Build Quality: To me the ISSC MK22 SCAR clone feels like the real deal, it's not till you load it up and fire off a few rounds that you can even tell you are shooting the .22 caliber rimefire version. The MK22 has a lot of metal parts and the fit and finish is very good. You do have to use quality .22 caliber ammo in this guns for the best results because it can be a bit picky and also make sure to also take a bit of extra time when loading your magazines to ensure the ammo is set well to the back of the magazine. I'm not saying you can't use the cheap box ammo but you will have to be prepared to clear a few rounds from time to time.
Realism: It doesn't get any more real than this, the ISSC MK22 is basically an FN SCAR in a smaller cheaper .22LR caliber. But if you want to spend $3000 on the real thing and several hundred dollars per day at the range in ammo then get the full NATO round firing version. Unfortunately my pocket book does not allow for this and I don't think we can even get the larger caliber versions here in Canada. I also go to an indoor range that allows .22 caliber rifles to be used alongside the pistols which makes getting out and using the ISSC MK22 that much easier.
Purchased From: ???
Pros:
One fifth the price of the NATO round firing version to purchase and operate.
Mostly metal construction with good usage of polymer in the right places to keep it light.
Lots of rails to mount just about any type of accessory you can think of.
Nice high capacity 22 round magazine to keep the shoots going.
Versatile flip up multi position sights for pistol or rifle based target acquiring.
Fully adjustable stock with three length positions and check hight position, can also be folded in.
Most bad ass looking .22 caliber rimefire rifle around.
Not the Cheapest .22LR on the market in this category but well worth the added price tag.
Can be a bit picky about which bullet's you use in it and how you load the magazine.
The rear stock cheek rest is a bit high when using the pistol sights or a low rise scope, you may need a riser under your scope.
Comments:
As you know, I don't do a lot of actual "real gun" reviews, the ones that use gun powder and shoot lead bullets. I do have a very soft spot for the .22 caliber rifles for a few reasons. Firstly, they are usually more inexpensive to buy and also to shoot as the ammo is only a fraction of the cost of the larger caliber ammo. .22 rimefire guns can also be shot in more areas and at most gun ranges so you are more likely to get better use out of it in the long run. The ISSC MK22 FN SCAR clone is definitely the most impressive .22 caliber tactical styled rifle you can get, at least in Canada and even though it is at the top of the price rang in it's category it is well worth it because it is really a very high quality gun at a reasonable price.
My Vimeo Video Review for the ISSC MK22 FN SCAR Type .22LR:
Although it looks like a semi auto, under the hood is a multi-pump pneumatic system that requires pumping between shots, you can pump just a few times or several to get right up to 625 fps with 7.9 grain pellets so I am assuming this one is not coming to the Canadian market in it's current configuration. By the way you can also shoot BB's by loading up to 350 into the BB reservoir located on the side of the receiver, while an 18 round track feeds the BB's for shooting.
Some other interesting points to mention are the adjustable rear stock and windage adjustable, dual aperture (2-position), flip rear sight, and elevation adjustable front sight that can also be removed entirely for alternative sighting like a red dot or scope.
The Crosman M417 - M4 styled pellet and BB rifle uses a polymer stock, receiver and forearm and sports tactical rails for mounting accessories in several locations. MSRP is right around $119.
Here 's to hoping for a Canadianized version some time in the near future...
Trigger Pull: The trigger pull on the CS9 is fairly light with a shorter pull. There is no double action on the Retay CS9 but it does have an exposed hammer making it easy to pull back and fire if you have a round already in the chamber but your gun is de-cocked.
Accuracy: N/A.
Build Quality: The build quality is similar to that of my EKOL blank guns which is what you would expect since they are both Turkish made guns. The Retay CS9 is well built and uses good quality materials with pretty decent fit and finish, this gun is mostly metal and has good heft for its small size weighing in at 2 pounds. My review unit is the Gloss black version but keep in mind we will be selling the CS9 in Matte Black and Satin only. The Retay CS9 performed very well for me and had no problems with chambering, firing and ejecting rounds when I tested it, just like the other Retay blank guns I tested before it
Realism: The Retay CS9, Smith & Wesson CS9 copy is a pretty good Smith & Wesson CS9 replica with the exception of the de-cocker and a few other minor differences. The basic gun shape and main features are similar to that of a Smith & Wesson CS9.
Barrel back pressure screw needs to be removed in order to use flare adaptor.
Could have been just a bit closer to the real CS9.
No Manual or cleaning rod included.
Comments:
I wasn't sure about the Retay CS9 at first and kind of preferred my Retay Baron HK and Eagle over the CS9 at first but this smaller Retay has really grown on me. It's almost the perfect size yet it retains a very compact frame while still having a mid sized guns weight and magazine capacity. And as mentioned, it kind of fills the void that the Zoraki 914 left behind when it was reclassified as a prohibited firearm in Canada. I will most likely be picking myself up a Satin version of this one to go with my black Retay CS9, hey you can't lose at this very good price.
My Vimeo Video Review of the Retay Baron HK Sig Sauer P228 copy) Blank Gun:
Trigger Pull: The trigger pull on the Retay Baron HK is about light to medium with a fairly short pull. The actual real steel Sig Sauer P228 would have both single and double action but many semi auto guns shoot in single or double action only.
Accuracy: N/A.
Build Quality: The build quality is similar to that of my EKOL blank guns which makes sense since they are both Turkish made guns. The Retay Baron HK is well built and uses good quality materials with pretty decent fit and finish, this gun is almost all metal and has good heft to it weighing in at 2.3 pounds. The matte black finish on this gun is pretty close to what you would find on a blued gun but with less shine to it, keep in mind we will be selling the Baron HK's in Matte Black and Satin. The Retay Baron HK performed very well for me and had no problems with loading, firing and ejecting rounds when I tested it.
Realism: The Retay Baron HK Sig Sauer P228 copy is a really good Sig Sauer P228 replica. The grips could even almost be swapped with a real Sig Sauer P228 grip if the screw holes where just a bit closer to the center of the hand grip. The basic gun shape and main features are almost dead on to the real Sig Sauer P228 including the de-cocker, slide catch and take down leaver. Internally the gun does differ as the Baron HK has a single action only trigger and a fixed barrel.
Barrel back pressure screw needs to be removed in order to use flare adaptor.
Grips are a bit shiny and the texture takes some getting used to.
No Manual or cleaning rod included.
Comments:
This gun for me was another must have blank shooter as I already own a real steal 9mm version of this gun (My Norinco NP-34), I just really like the look of Sig Sauer semi auto pistols! I will be getting another Retay Barron HK but this time in the satin finish. Because I have the real gun version, I was able to see how really close this gun is to an actual Sig in looks weight and handling. As a training gun, this is ideal as there is much less risk when using blank guns for practicing things like holster draws or even basic gun control drills.
My Vimeo Video Review of the Retay Baron HK Sig Sauer P228 copy) Blank Gun:
Trigger Pull: The trigger pull on the Retay is about medium pull, it is a bit heavier in double action mode as would be expected and I found that the release is fairly near the very end of the pull. I'm pretty sure the real Desert Eagle only has single action operation but being able to shoot in both actions is kind of nice.
Accuracy: N/A.
Build Quality: The build quality is similar to that of my EKOL blank guns which makes sense since they are both Turkish made guns. The Retay Eagle is well built and uses good quality materials, this gun is almost all metal and has good heft to it weighing in at 3.1 pounds. The finish quality is typical of other Turkish guns - good but not perfect. The satin finish on this gun has a raw metal look but with a slight gold tint and a semi polished look, keep in mind we will be selling it in Matte Black, non-shiny Chrome and Nickel. The Retay Eagle performed very well for me and had no problems with loading, firing and ejecting rounds when I tested it.
Realism: The Retay Eagle Desert Eagle copy is a pretty decent Desert Eagle replica with a few small exceptions. Overall I would say it is slightly smaller than a real Desert Eagle and has a bit smaller handle which may be good for people with smaller hands and it also has 2 screws near the front of the slide on each side that would not be there on a real Desert Eagle.
Slightly smaller in size then a real Desert Eagle?
The screws on the slide are a bit out of place and would look better color matched.
Barrel back pressure screw needs to be removed to use flare adaptor
No Manual or cleaning rod included.
Comments:
This gun was a must have blank gun for me, owning a real Desert Eagle is pretty much out of the question because they are not cheap to buy and operate. For a very small fraction of the price of a real Desert Eagle I get to own the next best thing and as a matter of fact, I may just buy one in each color since the price is very affordable! As with many of the blank guns, the Retay Eagle would make an excellent prop gun for TV or Movie scenes. And you can always impress you friends by pulling out the Retay Eagle and proclaiming "That's not a gun - This is a gun!"
My Vimeo Video Review of the Retay Eagle (Desert Eagle copy) Blank Gun:
Trigger Pull: The trigger pull on the Crosman - Kimar CK92 is absolutely excellent! Single action is very light and smooth and double action is almost exactly the same. The CK92 has one of the lightest and smoothest double action trigers out of all my airguns and that's saying a lot!
Accuracy: I shot the Crosman - Kimar CK92 air pistol at a target from 20 feet away in a free standing position, and it performed well getting about a two inch grouping right close to the center, just to the right. Most of the rounds stayed in a one inch group while two rounds strayed away a bit. I had a very awkward grip due to my camera mount so I know this guns should get closer to a one inch grouping with some getting used to it and using a standard grip. The rear sight is adjustable for windage and elevation so hitting the bullseye would not take much work. My Chronograph testing started out a bit rough due to the 10 year absence of shooting this gun but once I blew out some of the cobwebs it settled in at around the 350 fps mark and I was also able to get 10 magazines worth of shots before I noticed a drop in performance.
Build Quality: The Crosman- Kimar CK92 is built like a tank, it is probably one of my heaviest pellet pistols weighing in at 2.6 pounds! The build quality and craftsmanship is very nice with most of the gun being made out of metal and only a couple parts made from plastic like the grips and part of the rear sight. You can really feel the quality of this gun when you pick it up and squeeze the trigger a few times.
Realism:The CK92 pellet air pistol is a very nice copy of the real steel Beretta 92FS and considering it was made some 10 years ago when most replica air guns still looked mostly like air guns. You really have to give Crosman and Kimar credit for making this gun so close to the actual Beretta 92FS. Everything is exactly where it would normally be on the real Beretta and most of the mechanical part are functional, even if they serve a different purpose as it is an airgun after all.
The price is right, especially for this condition of collectors item!
All metal very heavy and well made gun.
Pellet shooting with a rifled barrel.
Fully adjustable rear sight with windage and elevation.
Decent accuracy and power and CO2 usage.
CO2 screw and tab are hidden in the handle.
Excellent trigger pull in both single and double action.
Very good Beretta 92FS replica.
Comes in a plastic case.
Rare collectors opportunity.
Made in Italy
Cons:
Have to use narrow headed CO2, can be a bit tricky to load until you get used to it
This is a 10 year old gun and hard to tell how reliable it will be because of its age?
When they are gone, they are gone! No more in this kind of shape.
Comments:
This was a very different review for me to do, a part of me wanted to just put my two CK92's away in a safe place and just keep them as collectors guns but I was also very curious to see if the CK92 performed as well as it looked and felt. Curiosity got the best of me as you can see and I am glad I ended up testing at least my Chrome CK92 because it was a real joy to shoot and it didn't let me down in any way. I am not going to recommend the CK92 airgun for anyone who plans to shot it regularly because I really believe that 10 year old valves and seals have a lot more potential to fail then a new airgun and getting replacement part will not be easy for this very fine air pistol. That said, you may get lucky because it's a very well made air gun. Personally I am going to put both my Chrome and Black Crosman - Kimar CK92's in a nice safe place and treasure them like you would anything rare and valuable. I think these guns are selling at a steel of a price right now and when they are all gone I just know people will be offering me several times the price I paid for my personal Chrome and Black Crosman - Kimar CK92's, and I will tell you my answer right now... Sorry, these guns are not for sale.
As promised, I went out and picked up some Reball (reusable) paintballs to try in my Tacamo T68 AK47 styled paintball rifle. I wanted to see what kind of damage they could inflict on various targets. The purpose of the Reball is mainly for practice or training use with paintball guns, they are also used in some indoor paintball facilities. Reballs have the advantage of not only being reusable but also not making a lot of mess.
Another benefit is that Reballs do not break apart and so they will deliver more energy on target which may be useful in a self defense situation with a high fps Paintball gun. Now I am not recommending these guns in any ways to be used for self defense or non-lethal use but other people have suggested it to me, and I wanted to see what these little rubber balls could do to different targets.
Keep in mind I was not looking for penetration as that is not the purpose of a "traumatic round", such as a rubber bullet. Rubber bullets are not supposed to penetrate but rather stun a person.
I found the Rubber Reball Paintballs to be about the same weight as standard paintballs and so they shoot about the same fps which in my gun was about 350 fps.
In conclusion, I would not want to be shot with a Reball out of a high fps paintball gun, as for stopping an intruder, maybe? You most certainly would be able to pick them out of a police lineup because they would be riddled with red welts :)
Ammunition Capacity: Dependent on hopper system used.
FPS: 350
Trigger Pull: The trigger pull on the Tacamo T68 AK-47 is what you would expect from a blowback operated single action gun, easy and light with just a bit of creep to it. The action of the bolt gives the gun a nice little snap to it and with the extra CO2 needed to push out the large .68 caliber paintball markers you also get a little bit of recoil adding to the shooting enjoyment.
Accuracy: I'm not going to spend a lot of time talking about accuracy with the Tacamo T68 Paintball gun as I don't really have any other references to base it on but I can say I was pretty impressed with how well it stayed on target considering most paintball ammo is not really uniform in shape which effects accuracy a lot. I was also expecting lower FPS performance closer to the 250-300 FPS range but I got nice consistent 350 FPS shots with the Tacamo T68 AK47.
Build Quality: Very nice, the Tacamo T68 AK-47 is made of mostly metal and wood with many actual parts from a real AK 47 including the wood handle and stock, rear sight, safety, magazine and authentic strap. The Tacamo Paintball rifle has some weight to it also making the AK 47 replica feel solid and durable.
Realism: Again the Tacamo AK 47 replica is made of lots of real AK47 parts making this gun very realistic, you can't really get around the telltale Paintball marker top loading tube and CO2 hookups but other then that the Tacamo AK47 really looks like a an actual AK47, so if you want to play the bad guy you can definitely pull it off with this replica paintball rifle.
Magazine can be used for storage of tools or extra paintballs
Adjustable sights
3 models to choose from with different styled stocks.
Comes with genuine strap.
Fun to play the bad guy with this villainous rifle.
Cons:
Semi auto only, no full auto - would have been nice!
May be a bit large and heavy compared to other more compact Paintball guns.
A few paintballs broke in my barrel when shooting, FPS pressure may have been set too high?
Comments:
I really like my Tacamo T68 AK47 Paintball rifle, again I have virtually no experience with Paintball guns so my reasons for liking it are mostly based on the all metal and wood build and real AK 47 look of the Tacamo T68 AK47. That said I thought it performed pretty good overall getting decent accuracy and shooting well into the 300+ FPS. I may pull this one out once in a while even to shot some various targets just because it does have a more realistic recoil feel when shooting then my smaller caliber pellet and BB airguns.
Action: Semi auto non-blowback, double action only.
Ammunition Type: Steel BBs 4.5mm.
Ammunition Capacity: 22 rounds
FPS: 443
Trigger Pull: The trigger pull on the IWI Jericho 941 was about medium to hard but defiantly not the worst air gun I have tested. After you quickly shoot off a full CO2 cartridge you may need a bit of a break to rest your trigger finger but the actual shooting experience is just fine.
Accuracy: Accuracy was pretty good for a double action shooter, I got around a 1.5 inch grouping from a 20 foot away free standing position, shooting just a hair to the left but a bit on the high side. It is a bit unfortunately that the Jericho 941 does not have sight elevation adjustments as it would make a very accurate airgun otherwise. I also put the Cybergun IWI Jericho 941 through my Chrony Chronograph and got very impressive FPS results, actually starting off and staying well above the claimed manufacturers FPS. My 8 shot average on a new CO2 was a very high 488 FPS, again well above Cybergun's claimed 443 FPS.
Build Quality: Very good, the Jericho 941 weights in at about 2 pounds which is a very hefty weight for a medium sized pistol. The build quality and fit and finish is good all around with decent usage of metal in the slide, magazine, outer barrel and trigger.
Realism: The Cybergun IWI Jericho 941 is very close to the look, weight, and feel of the real Israel Weapons Industries Jericho 941! Even though it doesn't have a working slide it definitely looks the part with the Licensed trade marks, cut out ejection port, full size drop out metal magazine and recessed metal barrel.
The hammer is only for show and does not cock back for single action shots.
Non adjustable rear sights, a bit of a pity with this rather accurate pistol.
Trigger action is bit on the heavy side and gets a bit tiring after lots of shooting.
Comments:
I ordered my Cybergun IWI Jericho 941 with two other Cybergun pistols (The Sigarms GSR and Sig Sauer SP2022), all of them in the lower and more affordable price point, the Jericho 941 is definitely the hardest shooting out of the bunch. For a relatively inexpensive BB gun you get good value for your money, most importantly a very accurate reproduction of the real IWI Jericho 941 firearm! If you want to purchase an air pistol replica that's very hard hitting, accurate, get's lots of shots per CO2, has excellent weight and realism then the Jericho 941 may be the airgun for you?
My Vimeo Videos for the Cybergun IWI Jericho 941 Air Pistol:
Trigger Pull: The trigger pull on the MP-655K is in the medium range with the single action being a bit lighter due to less cocking effort required. There is some force required to rotate the rotary magazines when shooting both pellets and BB's. It's important to make sure you use pellets that fit the rotary magazine correctly or they may move around and cause the magazine to bind up requiring additional trigger force.
Accuracy: I found the Baikal MP-655K to be a good shooter, this airgun took me some time to get used to however, so make sure to give it some time and also make sure to try an assortment of pellets as they do effect the trigger pull and the trigger pull ultimately effects accuracy. I did get about a 2 inch 8 shot grouping from an unrested 20 foot out position but I know this gun is capable of much better results. BB's also did fairly well in my test results. My Chronograph testing also confirmed that you can expect to get feet per second rating in-between 300 and 360 fps when using both pellets and BB's.
Build Quality: Excellent, like just about all the Baikal products, these guns are built to very high standards. the designs are sometimes unusual but you can count on the quality to be top notch and in most cases there is little to no difference between the materials used in Baikal's real guns and their air guns.
Realism: The Baikal IZH MP-655K is closely based on the real steel Baikal Viking 9mm semi auto pistol, or (Yarygin pistol) the latest Russian standard military-issue side arm. As far is looking and feeling like a real gun, it sure plays the part. Both the air gun version and 9mm version have steel slides and polymer frames.
You wWill have to read manual and get used to this guns operation.
A bit hard to load the pellet magazine at first.
Trigger is kind of funny and a bit hard on fingers.
Comments:
The Baikal MP-655K Pellet and BB Air pistol is another excellent product from Baikal, it is an extremely unique air gun in that it shoots both pellets with an 8 shot rotary magazine but can also shoot up to 100 BB's with its integrated 100 round BB hopper and special adapted magnetized rotary BB magazine! The quality of this gun is outstanding and there are tons of great features like the rifled barrel, fully adjustable sights, single and double action trigger, moving slide with slide catch, weapons grade materials and of course the ability to shoot both pellets and BB's. You are going to need to take some extra time to fully understand how to best use this air gun but the extra effort is well worth it in the end!
Action: Semi auto non-blowback, double action only.
Ammunition Type: Steel BBs 4.5mm.
Ammunition Capacity: 21 rounds
FPS: 397
Trigger Pull: The trigger pull on the Sig Sauer GSR Sigarms was about medium to hard but I have definitely experienced heavier trigger pulls on some guns. It is nice that the trigger is in the style of a 1911 and not your typical lever styled trigger. This may be one reason why the pull is a bit heavier on the GSR.
Accuracy: Accuracy was decent but not outstanding, I got around a 2.5 inch grouping from a 20 foot away free standing position, shooting just to the left and high on the target. I did find that I was able to zone in a bit better with the Cybergun GSR as I got used to the trigger. I also put the Cybergun Sig Sauer GSR through my Chrony Chronograph and got very close the manufacturers 397 claimed feet per second, actually starting off well above it and settling down to around the 370 FPS mark. My 8 shot average on a new CO2 was actually 422 FPS.
Build Quality: Very good, this is an almost all metal gun with a few exceptions like the hammer, trigger. magazine release, slide catch and the outer barrel. Pretty much everything else is metal including the slide, frame, magazine, and even the grips. The finish is very good and the Cybergun GSR worked flawlessly for me.
Realism:The Cybergun Sig Sauer GSR is very close to the look, weight, and feel of the real GSR Sigarms! Even the 1911 style trigger was used and licensed trademarks on the slide. It would have been nice to have a single action trigger and a working slide to finish off the illusion but overall the GSR is a really nice copy of the real steel Sig Sauer GSR Sigarms firearm.
Very Accurate Sig Sauer GSR Sigarms with licensing.
Nice high fps results close to manufacturers specifications.
Very affordable and good value for the money.
Lots of shots per CO2.
Nice sights with white dots front and back.
Magazine holds both the CO2 and BB's - always nice.
Recessed barrel for added realism.
True 1911 style trigger even though it is double action only.
Cons:
Non-blowback and the slide does not move either.
The hammer is only for show and does not cock for single action shots.
Non adjustable rear sights.
Trigger action is bit on the heavy side.
Comments:
I ordered my Cybergun Sig Sauer GSR Sigarms with two other Cybergun pistols (The Jericho 941 and Sig Sauer SP2022), all of them in the lower and more affordable price point, the GSR is the heaviest out of the bunch, most likely because of the metal frame. For a relatively inexpensive BB gun you get a lot for your money, most importantly a very accurate reproduction of the real GSR Sigarms firearm! If you're a 1911 fan and want to pick up an airgun that won't set you back too much, then the Cybergun GSR would make a great choice with it's heavy weight, full size drop out metal magazine, and true 1911 styled trigger.
Type: BB air pistol. Manufacturer: Cybergun. Model:Sig Sauer SP2022. Materials: Metal and polymer build. Weight: 1.7 pounds. Barrel: 4 inches, brass, non-rifled. Propulsion: CO2 x1. Action: Semi auto non-blowback, double action only. Ammunition Type: Steel BBs 4.5mm. Ammunition Capacity: 23 rounds FPS: 328 (Tested way higher!) Trigger Pull: The trigger pull on the Sig Sauer SP2028 was much lighter then I expected! As the SP2022 is a double action only pistol, the trigger must first cock the hammer before the hammer can be released, usually requiring additional force. The trigger was a bit long but smooth and light.
Accuracy: Very decent for a low cost short barreled BB shooter, I got just over a 2 inch grouping from a 20 foot away free standing position, shooting just to the left and a bit high. I also put the Cybergun Sig Sauer SP2022 Metal Slide version through my Chrony Chronograph and even though the box has a 328 fps rating on it, I got an incredible 8 shot average velocity of 478 fps and no my Chronograph was not broken! I really don't know what to say abut this? Perhaps my gun was an exception or maybe I accidentally got the "powered Version" as one does exist from Cybegun with a higher 426 fps claimed velocity. Or maybe they are all just this way? Build Quality: Very good, I was extremely pleased with the fit and finish of my Cybergun Sig Sauer SP2022 Sig Pro! The metal slide and polymer frame along with the all metal full size drop out magazine gave this air pistol a really nice balance and weight to it, I would expect it to be very similar to the real steel as they are both constructed similarly.
Realism: The Cybergun Sig Pro SP2022 is very close to the look, weight, and feel of the real Sig Sauer SP2022 Sig Pro! For a lower cost airgun, I was very impressed with all the detail that it had including the licensing and trademarks throughout the pistol and amazing attention to detail. Available From: The Replica Airguns Store
Pros:
Good weight and very solid feeling gun.
Metal slide and all metal full size drop out magazine.
Very Accurate licensed Sig Sauer SP2022 replica.
Crazy high fps results!
Very affordable.
Fairly light double action trigger.
Magazine holds both the CO2 and BB's - always nice.
Recessed barrel for added realism.
Good overall accuracy and shots per CO2.
Cons:
Non-blowback and the slide does not move either.
The hammer is only for show and does not move when firing.
Non adjustable rear sights.
Comments: I ordered my Cybergun Sig Sauer SP2022 Sig Pro with two other Cybergun pistols (The Jericho 941 and Sigarms GSR), all of them in the lower and more affordable price point, out of all three of them so far I am really liking the SP2022 for a lot of reasons: It just looks really good, it has good weight and feel, for an air pistol in this price range to have a metal slide and full metal drop out magazine is also a welcome change. But most of all mine shot so much harder then expected that I was almost afraid to publish my test results! Even if it shot closer to the claimed fps this gun is well worth it and I would still be very happy and quick to recommend the Cybergun Sig Sauer SP2022 Sig Pro.
My YouTube Videos for the Cybergun Sig Sauer SP2022 Sig Pro Metal Slide version Airgun:
Action: Electronic trigger with 1-3-6 round burst & 300-340-600 Rounds Per Minute.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 30 rounds.
FPS: 360-500.
Trigger Pull: The trigger pull on the IZH Drozd is nice and light due to the fact that the trigger is not mechanical but is instead an electronic on-off switch that operates a solenoid. The solenoid pulsates in turn hitting the CO2 valve release. This is how the single fire and burst fire rates are achieved.
Accuracy: When I was sighting the Baikal Drozd in I got several 5 shot groups well within 1 inch 30 feet out from the target. But when I did my actual video accuracy test, the Drozd did not perform as well, getting more like a 2 inch group, still very reasonable for a gun that can shoot 600 rounds per minute out of the box and 1200 rounds per minute when modified. With metal streaming out the barrel like that you are pretty much going to hit what ever you point it at, the odds are in your favor!
Build Quality: This is a typical Russian made gun, all business and less importance put on looks but even so it is visually appealing, at least to me! Everything works exactly as it should and even though the main shell is plastic it is really a weapons grade polymer so there is no cause for concern here. There are a fair amount of metal components like the factory barrel, most of the magazine and many internal parts.
Realism: Again, the Baikal Drozd IZH MP-661K is not a replica, but it does look like a sub machine gun in many ways, I'm really just not sure exactly what it looks like but when you are shooting this gun you really don't think much about this point because you are too busy grinning!
Rear stock can get lose sometimes (just add some tape to tighten it up a bit).
Comments:
The Baikal IZH MP-661K is one of the most fun BB machine guns out there and well worth the extra cost to get such a quality product that not only is great out of the box but can also be modified in so many ways to improve it's performance and looks dramatically. Sure the Baikal IZH MP-661K now has a big brother, the Drozd Blackbird, but the Blackbird may be just a bit of overkill for some, I kind of like the Drozd Classics more compact size and if you can't nail what your shooting at with 30 rounds then your doing something very wrong! The Drozd is really the epitome of extreme BB gun weaponry!
My Vimeo Video Review for this Russian made BB Machine gun:
Action: Bolt-action single shot, single action only.
Ammunition Type: .177 caliber pellet.
Ammunition Capacity: 1 round.
FPS: 495.
Trigger Pull: The trigger pull on the Crosman 1377 American Classic is non-adjustable but is short and light with virtually no creep at all, it's just right there! It makes for very accurate shot placement.
Accuracy: I found the Crosman 1377 to be an amazing target pistol, getting about a 1/2 inch grouping from 30 feet out in a semi-rested position. And I performed my accuracy test twice with the same result each time. I also put the America Classic through the Chrony Chronograph test using increasingly more pumps each time and got it up into the 460+ fps range with 15 pumps using 6.9 grain RWS lead pellets. Keep in mind this is the Canadianized version that has been release valve limited to under 500 fps, so over-pumping should not hurt this gun too much, but either way do so at your own risk as Crosman says it's a 10 pump gun...
Build Quality:The Crosman 1377 American Classic is not a fancy looking gun but it gets the job done with a mostly metal design and build. Remember this gun has been around for 40 years and has pretty much stayed the same so Crosman must be doing something right with it.
Realism:The Crosman 1377 pellet pistol is not a replica, it is a target airgun, so it looks like a target air pistol and for that we'll give it high marks ;)
Ability to regulate power with the amount of pumps.
Mostly metal construction.
Rifled barrel.
Adjustable sights for windage and elevation.
Light and short single action trigger.
Would be good for small pest control because of its decent FPS and excellent accuracy for precise shot placement ability.
Lots of mods and upgrades available for this gun!
It has been around for 40 years!
Cons:
Trigger is a bit thin (but can be upgraded)
Sights are fully adjustable but a bit hard to adjust.
Comments:
The Crosman 1377 America Classic .177 caliber pellet pistol is a must have target air pistol, even though I own the much more full featured (and pricey!) Webley Alecto .22 caliber multi-pump pneumatic target air pistol, the Crosman 1377 is still great to own and shoot. I think one day I will pass my 1377 down to my son when he is ready to learn the art of accurate pistol target shooting. The fact that you can head out for the day with the 1377 America Classic in one hand and a tin of .177 caliber pellets in the other and shoot till you can't shoot any more, with no CO2 required makes it very inviting - and pretty much everything you point it at will get nocked down or nailed dead on.
Action: Semi auto blowback, double and single action.
Ammunition Type: Steel BBs 4.5mm.
Ammunition Capacity: 18 rounds
FPS: 330
Trigger Pull: The trigger pull on the Sig Sauer X-Five is what you would expect from a real automatic pistol, in single action mode it is very light and short. The blowback action re-cocks the hammer with each shot.
Accuracy: Excellent for a BB shooter, I got about a 1 inch grouping from a 20 foot away free standing position with this red dot equipped BB shooter. I also put the Cybergun Sig Sauer P226 Open version through my Chrony Chronograph and even though the box has a 300 FPS rating on it I, I was able to get an 8 shot average of 343 FPS.
Build Quality: Excellent, with an almost all metal construction, this gun has some weight to it and the craftsmanship is also very good!
Realism: The Cybergun Sig Sauer X-Five P226 is as close as you can come to the look, weight, feel, and action of the real Sig Sauer X-Five. P226! Everything about this gun makes it feel real, it would make an excellent training gun for someone just getting started in the sport or even for a skilled semi auto shooter wanting to hone their skills when a gun range is not easily accessible.
Sacrifice some fps and shots per CO2 because of the heavy blowback but worth it.
A bit hard to load up.
Can not field strip without taking off the sight rail?
Comments:
This Cybergun BB air pistol is styled after many modern blowback Airsoft pistols, this means it functions very similarly to the real steel. It is a very hefty gun made almost entirely from metal and has a very snappy blowback action which adds to its shooting realism. Even the magazine looks and feels like a real 9mm magazine with similar weight and dimensions. The Cybergun Sig Sauer X-Five Open version shoots even more accurately than the non-sight rail version because of the addition of a Red Dot scope helping the accuracy! Both the regular version of teh Sig Sauer X-Five P226 and this "Open" version are absolutely great air pistols but for the extra $10 price tag you get some really nice additions to this pistol including an adjustable rear sight.
My Vimeo Videos for this very fine Cybergun Sig Sauer P226 X-Five Open version Airgun:
Materials: Plastic (polymer) and some metal construction.
Weight: 2.95 pounds.
Barrel: 9.75 inches, metal non-rifled.
Propulsion: CO2 x 1 (88 gram).
Action: Semi/Full auto 1-4-8 shot burst, electronic trigger motor driven.
Ammunition Type: 4.5mm BB's
Ammunition Capacity: 360-400round hopper with 24 shot internal spring fed magazine.
FPS: 540 (single shot).
Trigger Pull: The trigger on the Umarex EBOS is electronic so it does not have any real distinct break point or resistance to it. It is essentially a switch that actives a motor and the motor operates the CO2 valve. It works very well and even in single fire mode you can fire very quickly, almost as fast as when shooting in 500 rounds per minute mode but with a lot more effort from the user!
Accuracy: I shot this CO2 BB Machine gun at a target from 30 feet away using my EOTech Styled Red-Green Dot Tactical Scope in a semi rested standing position, and it performed excellent getting a little over a 1 inch grouping fairly centered on target. I also performed my accuracy test in full auto 8 round burst mode and although the grouping did get a bit larger, the EBOS still stayed well on target. I decided to use a partially used 88 gram CO2 cartridge to see what the EBOS could do in a very real world Feet Per Second test and I was able to get a 481 fps average 8 shot result which was very good considering I was well into the CO2 tank at that point. On a brand new CO2 cartridge, attaining the maximum claimed fps rating is very achievable.
Build Quality: The EBOS is an almost all external polymer air gun with some metal components on the inside. For the most part it feels solid and has good weight especially when you load up the 88 gram CO2 tank and slap on a Red Dot and a couple other accessories. Everything seemed to operate as you would expect and I especially liked the easy access to the CO2 and well designed rear stock which conceals the CO2 cartridge very nicely. My only concern with the EBOS is the front barrel which protrudes out from the EBOS a bit and because it is made of plastic, it may be prone to breakage in the event of a drop directly onto the barrel.
Realism: The Umarex EBOS BB machine gun doesn't closely look like any specific Tactical rifle, but does have that very assault rifle look to it. It almost looks to me like something from a Science Fiction movie!
The all plastic exterior may put off some people looking for a heavier more metal gun.
88 Gram CO2 can be a bit pricy, not as cost effective as 12 gram CO2.
The rear sight was way to wide - it is the first thing to replace or upgrade.
The plastic barrel worries me just a bit in the event of a fall?
Comments:
The Umarex EBOS is a really - really fun BB gun! That should almost be enough right there to buy it on the spot as it's not all that expensive all thing considered! The EBOS has a lot going for it, nice high up to 540 fps velocities, very good accuracy for a BB shooter even in full auto mode, a high capacity CO2 and BB feeding system, versatile shooting selection (1-4-8 shot burst) and (300-400-500 rounds per minute), the ability to add accessories top and bottom and a price tag that is very reasonable. Unfortunately this Umarex product is not that readily available here in Canada because the scary 540 FPS rating on the box, but for you non-Canadians, you're in luck so make sure to think about us Canucks when your spraying BB's with the Umarex EBOS.
Watch my Vimeo Video Review of the Umarex EBOS CO2 BB Machine gun:
Trigger Pull: The trigger pull on the Crosman PRO77 is good and light as it should be for a single action only airgun. I did find it to be a bit creepy when the magazine is loaded but on an unloaded magazine it is smooth as silk. There must be something going on with the chambering of BB's.
Accuracy: I found the Crosman PRO77 to be a decent shooter, getting about a 2 inch grouping from 20 feet out standing in a free standing position. After my test grouping I shot another 2 magazines into the target in a more rushed shooting style and the pattern did not grow much larger than the original 2 inches. I also put 8 rounds through my Chrony Chronograph and the PRO77 averaged a respectable 285 fps, not too far off of the factory claim of 325 fps and keep in mind it was not a very warm day for the testing.
Build Quality: The Crosman PRO77 looks and feels overall like a pretty well made airgun. The slide, trigger, hammer, slide release, CO2 screw and safety are all made out of metal. The only part that could use an upgrade would be the all plastic magazine, it would have been nice to have a metal magazine for durability and a bit extra weight in the gun. The fit and paint looked good and did not show any signs of wear problems in the high point areas.
Realism: The Crosman PRO77 is not a Replica gun so to speak but it does look a bit like a combination of perhaps a Sig Sauer, Steyr M9 and maybe even a little Walther P series thrown in to the pot? Crosman seems to keep well away from licensing guns for the most part. Maybe they figure they can put more money into the product and less money into other companies accounts?
A bit low on fps compared to some other blowback guns.
Ejection port is not cut out but molded into the slide.
Magazine could have been made out of metal and not all plastic.
Non-adjustable sights, kind of normal in this category.
Comments:
The Crosman PRO77 I believe is Crosman's first modern blowback operated air pistol and they did a pretty good job with it getting most things right like a true single action trigger and working hammer, a discreet CO2 system, lots of metal parts where they really need to be and an overall good performer. Sure there is room for some improvement but as a first attempt it's a nice gun and not one that's going to set you back to much money either. I am looking forward to Crosman's upcoming blowback air pistol, the C51 that should be out in a month or two...
My Vimeo Video Review of the Crosman PRO77 Blowback BB Pistol:
