We just received an order of KWC products so if you've been waiting for some out of stock items then go take a look! By the way, the KWC Beretta / Taurus full metal blowback BB and Airsoft versions now come semi and full auto enabled!
I originally made this Field Test Review Video a few months ago but had to pull it down because it featured two WE Products. The WE AK74-UN and the WE G18C which unfortunately looks a bit like a Glock. If you are not familiar with the video I made on the Glock Trademark Infringement Cease Order I received then you should probably watch that video, it will fill in some of the gaps on why I had to cut out the WE G18C portions from this video and repost it with only the parts that showcase the WE AK74-UN.
Anyways you can still read my Original Field Test Review post minus the video and photos of the WE G18C.
Type: Airsoft Pistol.
Manufacturer:Cybergun - VFC.
Model:Smith & Wesson M&P 9C.
Materials: Metal and Polymer.
Weight: 1.25 pounds (566 grams).
Barrel: 3 inches, metal non-rifled.
Propulsion: GBB - Green Gas or Propane.
Action: Semi & full auto, single action only with full blowback.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 16 round full size drop out metal magazine.
FPS: 280+.
Trigger Pull: The Single Action Only trigger pull on the Cybergun - VFC Smith & Wesson M&P 9C GBB Airsoft Pistol is kind of what I would expect form the real Smith & Wesson M&P 9C, fairly light with a small amount of take-up and creep but still fairly short. And the trigger safety actually works just the same as the real steel Smith & Wesson M&P 9C!
Accuracy: I have already done my dedicated Field Test Shooting Video for the Cybergun - VFC Smith & Wesson M&P 9C GBB Airsoft Pistol so check out the link here, This very short barreled pistol is not going to win any target shooting contests but it faired well and even shot a bit tighter groupings and higher fps than I expected. Most importantly it worked exactly as it was supposed to without any problems.
Build Quality: The Cybergun - VFC Smith & Wesson M&P 9C GBB Airsoft Pistol is extremely well built and you will find metal and polymer in pretty much the same places as you would find on a real S&W M&P 9C. Fit and finish and quality of materials seems really good, I am really happy with the work VFC is doing with their guns, at least from what I see here with their Smith & Wesson M&P 9C GBB Airsoft Pistol.
Realism: The Cybergun - VFC Smith & Wesson M&P 9C GBB Airsoft Pistol is based on the real steel version Smith & Wesson M&P 9C and I have to say this is one of the most bang on replications of any gun I have seen, you would have to get right up close to tell the difference and only then if you looked at either the magazine or you could see the inner Airsoft barrel. This gun is juts that realistic. There is Smith & Wesson licensing and marking all over this gun and even the white warning instructions on the right side of the slide. Of course this Airsoft Replica Pistol field strips and functions just like the real Smith & Wesson M&P 9C Pistol.
Purchase it from:The Replica Airguns Store
Pros:
Very good weight and solid feeling gun for being so compact.
Full size drop out metal magazine.
Nice snappy blowback action.
Excellent fit and finish.
Extremely accurate looking and working Smith & Wesson M&P 9C - Fully licensed..
Rear sight is adjustable for windage.
White dot sights for quick target acquisition
Working trigger safety
Fully field strip-able.
Cons:
Comes with an orange tip not required for Canada.
White dot sights need to be install?
Right side slide catch-release is for show only - non-functioning.
Comments:
Overall the Cybergun - VFC Smith & Wesson M&P 9C GBB Airsoft Pistol as I said is really a wonderful replica in terms of realism in looks and function, I wish all Airsoft guns and Airguns paid this much attention to the details. But more than that, the Cybergun - VFC Smith & Wesson M&P 9C is really well put together and even though it is small it feels tuff and well made. I could see myself using this exact pistol as a backup gun for some future Airsoft battles :) I hope to have the opportunity to review more guns made by VFS down the road...
My Vimeo Video Review for the Cybergun - VFC Smith & Wesson M&P 9C GBB Airsoft Pistol:
All references, photos and video claiming that any item in this review/video looks like a Glock or is a Replica of a Glock in any way shape or form have been removed from this post as requested by Glock "Renzulli Law Firm"
I almost forgot to do my field test review for my WE AK-74UN & WE G18C Tactical GBB Airsoft Pistol and Rifle! I decided to do them both together on this one but I still did my usual full testing for both guns which consisted of my Chronograph, Target and Can destruction along with some high speed slow motion of the blowback action of both guns in full auto mode.
Photo of WE G18C Removed by Request from Glock "Renzulli Law Firm"
Your best bet is to watch my Youtube video and see how both of these WE Airsoft guns perform. Overall they are both rally nice and super realistic, the WE G18C Tactical is definitely the full auto monster here while the AK-74UN is the bull in the China store with its crazy heavy blowback action, it has so much recoil that when shooting in full auto it kind of runs our of steam near the end, not so with the WE G18C as it did not slow down even with the 50 round magazine loaded up!
The WE AK-74UN even with it's crazy recoil holds on target very well in semi and full auto and of course has the superior fps performance. I found when shooting the G18C in full auto, I needed to hold my aim-point low as the blowback and super fast cycle rate wanted to pull the gun up and over my target, same would be true with a real gun so no surprise here.
Photo of WE G18C Removed by Request from Glock "Renzulli Law Firm"
I filmed this video Field Test Shooting Review of my Cybergun VFC Smith & Wesson M&P 9C GBB Airsoft Pistol alongside my Cybergun Tanfoglio Gold Custom which I already posted, both guns performed very well for me. I am supper impressed with the realism of the Cybergun VFC Smith & Wesson M&P 9C and was hopping that the testing would prove this Airsoft pistol to be equally as good of a shooter as it is a looker and I was not let down. It's not going to win any awards for super high fps or tight accuracy but it did a nice job overall and most importantly it worked without any problems whatsoever.
I shot this Cybergun blowback Airsoft pistol using .20 gram Airsoft BB's through my Chrony Chronograph and got just under 300 fps which is not bad for such a compact short barreled GBB Airsoft pistol. I also shot 5 rounds first in semi auto at the target from 20 feet out using a semi rested position (resting on a sand bag up front and kneeling in the back) and the S&W M&P 9C shot a respectable 2 inch grouping. When I switched over to full auto and blasted the last 10 rounds it was pretty much a spray and pray but who cares it was fun and if anyone was standing in front of that they where gonna get hit for sure.
I really like the Cybergun VFC Smith & Wesson M&P 9C GBB Airsoft Pistol , not just because it really looks the part, it also feels solid and well built, everything about it seems to be very high quality and the shooting performance is no letdown either. This may even be one of my favorite Airsoft pistols! Look forward to my upcoming Table Top Review for this very fine Cybergun Airsoft Pistol...
I received some review BB and Airsoft guns and as I often like to do, I made a quick Update Vimeo Video for you. This way I can show them off real quickly so you get at least a bit of a taste of what's in store...
Below are the guns I show you in todays Update Video!
ASG CZ 75D GNB 4.5mm BB Compact CO2 Pistol:
4.5mm Steel BB
17 Round Full Size Drop Out Metal Magazine
400 FPS
Adjustable Rear Sight
Working Slide
Built-in Accessory Rail
1.3 Pounds (595 grams)
Cybergun Blackwater 1911 R2 Blowback CO2 4.5mm BB Air Pistol:
4.5mm Steel BB
18 Round Full Size Drop Out Metal Magazine
312 FPS
Full Blowback Operation
Blackwater Licensed
Built-in Accessory Rail
2.04 Pounds (925 grams)
This product is no longer available. Check out these similar guns instead:
Cybergun Tanfoglio Gold Custom 4.5mm BB Blowback Air Pistol:
4.5mm Steel BB
18 Round Full Size Drop Out Metal Magazine
300 FPS
Full Blowback Operation
Compensator and Sight Rail
2.96 Pounds (1343 grams)
Cybergun Smith & Wesson M&P 9C GBB Airsoft Pistol:
6mm Airsoft BB's
16 Round Full Size Drop Out Metal Magazine
300 FPS
Full Blowback Operation
Semi & Full Auto
1.25 Pounds (567 grams)
Sport Smoke Tactical Smoke Grenade:
Cool Burning
Biodegradable
Smoke Output of 10,000Cubic Feet
75 Second Duration
Made in the USA
We have added some items to the Canada and US Replica Airguns Stores, most are completely new items and one is a Canada only item we added to the US store!
KWC 1911 Tac A1 Blowback CO2 Steel BB Pistol
I wanted to cover some basic Airgun, Airsoft Gun, Blank Gun and Paintball Gun information on what do they all shoot, what makes them shoot and some other miscellaneous info thrown in along the way...
Your should also watch the video attached at the bottom of this post as it goes into a fair amount of detail.
Let's begin with the types of ammo used:
Airgun Ammo
Airgun ammo for the most part is broken down into BBs and Pellets, the most standard size BB and Pellet is the 4.5mm or .177 caliber Steel BB and Lead Pellet. You can also get Pellets in other calibers and even other materials other than lead such as steel or aluminum, some can have plastic skirting around a metal interior.
Pellets also come in a variety of caliber's like .177, .20. 22. 25 and even larger but then I would start considering them to be bullets as they will take on the shape of a bullet when they get into the larger sizes.
Airgun Ammo is not be fired at people, it is primarily used for target and hunting small game.
Airguns can use Spring Pistons, CO2, Compressed Air and Multi-pump propulsion systems.
Airsoft Gun Ammo
Airsoft Guns for the most part shoot round 6mm (.22 caliber) plastic BBs which come in a variety of weights ranging from .12 grams up to .48 grams. There are larger Airsoft BBs such as 8mm and even larger.
There are biodegradable and even tracer florescent Airsoft BBs available.
Airsoft Ammo is traditionally used for Airsoft battles and can be fired at people using protective gear. Airsoft Ammo can also be used for target shooting.
Airsoft Guns can use Spring Pistons, Spring Piston - AEG (Electric Motor) CO2, Gas (Green, Red, Propane) and Compressed Air propulsion systems.
Paintball Gun Ammo
Paintball Guns or "Markers" have been historically used for the sport of Paintball but their whereabouts came from the need of ranchers and forestry workers to mark trees. Hence the name "Marker"
Paintball ammo comes in a variety of sizes ranging with the most common being .43 and .68 caliber. They are generally made from a gelatin outer coating containing primarily polyethylene glycol, other non-toxic and water-soluble substances, and dye, they are usually biodegradable.
Paintball Guns can also shoot a variety of Paintball Ammo that can be made out of Rubber, Plastic, Glass and they can also contain Powders and even Pepper for use in non lethal defense.
Paintball Guns can generally use either CO2 or Compressed Air as their propellant.
Blank Gun Ammo
Blank Guns are just like Real Guns but without the dangerous bullet at the end of the brass shell. Other than that they work exactly the same as a Real Gun!
Blank Guns are used when a bullet is not required or even wanted. For instance... Gun safety, gun training, training animals to be around guns and/or loud noises, Props for Movies - Stage - Film - TV, Collectors that do not want the red tape associated with owning a Real Gun or when owning a Real Gun is prohibited.
Blank Guns can shoot a variety of sized ammo, most common are .22 caliber crimped, .380 crimped, 8mm P.A.K. and 9mm P.A.K.
Blank Guns use gun powder as their means of operation.
Here are the most common forms of propulsion used in the guns we discussed earlier:
CO2
CO2 is the most common propellant in Airguns (BB and Pellet), it is also used in Airsoft Guns and Paintball Guns.
CO2 is a compressed gas which expands when released, it requires a warm environment to fully expand and tends to cool it's surroundings quickly when shot fast or in full automatic which can slow the velocity of the projectile and even freeze up the gun being used.
The most common reusable CO2 cartridges are 12 and 88 gram but you can get larger CO2 tanks in a variety of sizes that can be refilled with CO2.
Gas
Gas is used primarily in Airsoft Guns, I have not personally seen an Airgun that is made to use Gas other than CO2.
Gas is similar to CO2 in that it is a compressed gas that expands when releases, it also cools down the gun it is being used in and requires a warm environment.
Gas comes in a variety of names, Green Gas, Red Gas and Propane Gas. Green Gas contains Propane as it's base but has additives in it like silicone for lubrication .
Red Gas is know to be a bit more powerful than Green Gas as it has Chlorodifluoromethane or HCFC-22, R22 or Freon 22 used in refrigeration which turns to a liquid under a slightly higher pressure giving you slightly higher fps.
Many people use propane gas with an adapter that allows the mixture of silicone as propane is cheaper to buy.
Compressed Air (HPA)
Compressed Air (HPA - High Pressure Air) is most commonly used in Airguns and Paintball Guns but some people use it for their Gas based Airsoft guns.
The compressed air comes from high PSI tanks that can be purchased in a variety of sizes and contains compressed air at pressures up to 5000psi.
These tanks are reusable and usually need to be refilled at a paintball or scuba shop, some people buy their own compressors or large scuba tanks for refilling purposes.
Some Compressed Air (HPA) guns have their own built in tanks that can be filled with a compressor or even a manual pump.
Compressed air does not cool down the gun it is being used in and is a great option for high output or fully automatic guns.
Multi-Pump Pneumatic
Multi-Pump Pneumatic systems are most commonly used in Pellet and/or BB guns.
Multi-Pump Pneumatic guns use the same principle as HPA - High Pressure Air guns in that they require pressurized air as the propellant. The main difference with Multi-Pump Pneumatic guns, is that you do all the work by pumping the gun between shots. Generally speaking you pump the gun 3-10 times, take a shot and repeat this process.
Multi-Pump Pneumatic guns are not effected by air temperature and are great for target and small pest control.
Spring Piston
Spring pistons are generally found in Pellet Rifles and Pistols but some Airsoft Guns also use a Spring Piston System and generally speaking Spring Piston Guns are single shot only or in other words, the Spring needs to be drawn back before each shot. Spring Piston Guns can have magazines that allow for quicker repeat shots.
Spring Piston Guns come in many cocking configurations, Brake Barrel and Side lever to name a couple.
The Spring can be a Mechanical Spring or a Gas Spring.
Spring Piston Guns are not effected by temperature and are often used for small game hunting and target shooting.
Automatic Electric Guns (AEG)
Automatic Electric Guns are generally found in Airsoft Rifles but there are some Airsoft Pistols (AEP) that use this same system.
Automatic Electric Guns use a similar system to a Spring Piston gun but have an electric motor that does all the work of drawing back the spring. You can even have fully automatic AEG guns.
The power for the electric motor comes from removable batteries, so it is a combination a battery supplying the motor with the power to draw back the spring that creates a pillow of air that shoots the BB.
AEG Airsoft Guns are great for situations when you require high capacity magazines with full auto capability.
Gun Powder
Gun powder is used in Blank Guns, in the same manor that it is used in a Real Gun, the charge from the Gun Powder supplies the force required to operate the blowback in most semi auto Blank Pistols, it also creates the sound of a live round along with the muzzle flash which makes Blank Guns great for training and as Props for Movies and Film.
Because the kinetic energy from a blank gun is the same as a real gun, blank guns can be very dangerous when used in close proximity to an object, see my "Are Blank Guns Dangerous Video"!
Some other Gun Relevant Terminology:
Blowback
Blowback operation is when some of the force of the propellant is used to move the slide backwards, which in most cases cocks the hammer for single action and can also pickup and chamber a round into the barrel.
The slide spring supplies the energy for the return to the forward position of the slide.
Blowback Guns do rob some power from the bullet force and in the case of CO2 or Gas Guns the also reduce the amount of shots per CO2 or Gas fill.
Revolver, Semi Automatic
Revolver: Revolvers feed ammunition via the rotation of a cartridge-filled cylinder, in which each cartridge is contained in its own ignition chamber, and is sequentially brought into alignment with the weapon's barrel by a mechanism linked to the weapon's trigger (double-action) or its hammer (single-action)
Semi Automatic: semi-automatic pistols use the energy of one shot to reload the chamber for the next. Typically recoil energy from a fired round is mechanically harnessed. After a round is fired, the pistol will cycle, ejecting the spent casing and chambering a new round from the magazine, allowing another shot to take place immediately.
Single Shot, Repeater, Semi Automatic & Fully Automatic
Single Shot: A Single Shot Gun needs to be reloaded each time it is shot.
Repeater: Repeating action Guns are single barreled guns containing multiple rounds of ammunition. These rounds are loaded from a magazine by means of a manual or automatic mechanism, and the action that reloads the rifle also typically re-cocks the firing action. The term repeating rifle is most often applied to weapons in which the next cartridge is loaded by a manual action, as opposed to semi-automatic rifles, in which the force of one shot is used to load the next.
Semi Automatic: A semi-automatic, or self-loading, firearm is a weapon that performs all steps necessary to prepare the weapon to fire again after firing.
Fully Automatic: A Gun that uses either its recoil or a portion of the gas propelling the projectile to remove the spent cartridge (in the case of a gun-shell), fire again repeatedly, as long as the trigger is held down or until the magazine is exhausted. Automatic Guns are distinguished from semi-automatic Guns in their ability to fire more than one shot in succession once the trigger is pulled.
Single, Double Action, SA/DA
Single-Action (SA): trigger performs the single action of releasing the hammer or striker to discharge the firearm each time the trigger is pulled.
Double-Action (DA): The trigger both cocks and releases the hammer or striker
SA-DA: A SA/DA firearm combines the features of both mechanisms. You can pull the trigger in Double Action when the hammer is down which cocks and releases the trigger or you can cock the hammer with your thumb and then release the trigger using Single Action to fire the weapon.
Lever Action, Pump Action, Bolt Action
Lever Action: In a classic lever-action firearm, rounds are individually loaded into a tubular magazine parallel to and below the barrel. A short bolt is held in place with an over center toggle action. Once closed, the over center action prevents opening solely by the force on the bolt when the weapon is fired. This toggle action is operated by a hand grip that forms part of the trigger guard. When operated, a spring in the tubular magazine pushes a fresh round into position. Returning the operating lever to the home position chambers the round and closes the breach.
Pump Action: With a pump-action firearm, the action is operated by a movable fore-end that goes backwards and forwards to eject, extract, and chamber a round of ammunition. Pump-actions are usually associated with shotguns.
Bolt Action: The bolt opens and closes the breech end of the barrel and contains the firing pin. The bolt is held in place with a lever that fits into a notch. Moving this lever out of the notch will release the restraint on the bolt, allowing it to be drawn back. An extractor removes the spent cartridge, which is then ejected through the lever slot. A spring at the bottom of the magazine pushes up the reserve rounds, positioning the topmost between the bolt and the chamber at the base of the barrel. Pushing the bolt lever forward chambers this round and pushing the lever into the notch locks the bolt and enables the trigger mechanism.
Magazine vs Clip
Magazine: A magazine is an ammunition storage and feeding device within or attached to a repeating firearm. Magazines can be removable (detachable) or integral to the firearm. The magazine functions by moving the cartridges stored in the magazine into a position where they may be loaded into the chamber by the action of the firearm. The detachable magazine is often referred to as a clip, although this is technically inaccurate.
Clip: A clip is a device that is used to store multiple rounds of ammunition together as a unit, ready for insertion into the magazine or cylinder of a firearm. This speeds up the process of loading and reloading the firearm as several rounds can be loaded at once, rather than one round being loaded at a time. The term "clip" is also frequently used to refer to a detachable magazine, though such usage is incorrect.
I wanted to show off a few new items that I will be reviewing, one being the Crosman MK-177 Pellet and BB pneumatic multi-pump air rifle that was very graciously provided to me by Crosman for review. And the other item is something kind of new in terms of the type of gun, since it is not really gun but rather a bow, or crossbow to be exact. We hope to be adding to our Replica Airguns Store a couple variations of the Avalanche Trailblazer 150lb Crossbows in wood stock and polymer stock versions.
Here are a couple key points about each item being looked at in this update video and then I will leave you with some detailed photos to drool over and of course my YouTube Update Video to watch...
Crosman MK-177 multi-pump bolt action .177 caliber BB/pellet air rifle:
Shoots both .177 caliber pellets and 4.5mm Steel BB's
Maximum 800 FPS (US Version being reviewed here)
5 shot pellet magazine and 300+ BB reservoir
Multi-pump single shot bolt action
3-10 pumps per shot
16.75 inch rifled barrel
3.5 pounds
Mostly plastic with some internal metal parts
Avalanche Trailblazer 150lb Crossbow with Wood Stock:
150 pound pull
Fiberglass bow
Wood Stock
Comes with two arrows
Fully adjustable rear sight
Can mount a dovetail sight to it.
Type: Airsoft GBB Rifle.
Manufacturer:WE.
Model:AK74UN.
Materials: Metal & plastic.
Weight: 6.9 pounds (3115 Grams).
Barrel: 9 inches, smooth bore.
Propulsion: (GBB) Gas Blowback.
Action: Semi & full auto.
Ammunition Type: Airsoft 6mm Plastic BB's.
Ammunition Capacity: 30 rounds.
FPS: 400+.
Trigger Pull: The trigger pull on the WE AK74UN GBB Airsoft Rifle is very light (maybe even under 1 pound) since the blowback action has already pre-cocking the action making this rifle single action only. The take-up is very short, about one eighth of an inch or even less! The magazine has two switches, the one on the top allows you to dry fire while the one on the backside resets the trigger block. You will need to push the side switch down after reloading your magazine to allow the trigger/hammer to function again.
Accuracy: Out of the box the WE AK74UN Airsoft Rifle shot on the high side for me, about 8 inches at 30 feet, you can adjust the front sight post to some degree for elevation but I was not able to find any way of adjusting the windage? I did my pretest shooting from the 30 foot mark and I found the WE AK74UN Gas Blowback Airsoft Rifle AK74 Replica shot a very respectable 5 shot 1.5 inch group in semi auto which opened up of course when I shot the rest of the rounds in full auto. The full auto group stayed pretty tight considering all the recoil that was going on. I would say this gun should be able to shoot fairly accurately at distances even greater than 50 feet and even in full auto.
Build Quality: The WE AK74UN Airsoft Rifle is very well made with a lot of actual stamped steel parts, the only metal (zinc alloy) would be the trigger group, bolt, and part of the front sight, the pistol grip and front stock are made out of a matt finished hard plastic. Fit and finish is near perfect and I had no problems with the functionality of this Airsoft replica in any way. There are third party steel replacement parts for the trigger group and bolt if you want to swap these out at some point.
Realism: Everything about this gun is realistic! Operation, field stripping, tones of steel and metal parts, the long travel bolt, the slower cycle rate, and the heavy recoil all make the WE AK74UN GBB Airsoft Rifle as near perfect a working replica that you can find. Sure WE modernized this AK74 variant a bit with the addition of some enhancements but they do work well and make this Airsoft rifle very usable.
Reviewed by:Replica Airguns.
Pros:
Long travel bolt with heavy blowback, lower cycle rate like a real AK!
Lots of steel and metal in this gun, very hefty and solid.
Awesome blowback kick really hits you in the shoulder.
Semi auto & full auto selectable.
Field strips just like the real AK.
Nice high 400+ FPS and good 1.5 inch 5 shot group from 30 feet away.
Decent use of Gas.
Modified improved selector/safety switch can be used with trigger finger and also can be used to lock the bolt back for easy hop-up adjustments.
Magwell guide helps with insertion of the magazine.
Cons:
Long travel bolt kicks so hard that it can wear the softer Zinc Alloy internal parts quickly like the bolt and trigger grouping.
Sights are not really very adjustable, at least for windage.
Comments:
I really love my WE AK74UN Gas Blowback Airsoft Rifle, it is truly one of the most realistic replica guns I own, not just in looks but in how it functions and shoots. The heavy use of stamped steel, lots of metal throughout, full travel bolt with heavy blowback and realistic AK cycle rate make this one of the most fun guns to shoot that I own. If you're looking for a Gas Blowback AK styled Airsoft rifle this one is one of the best out there!
My Vimeo Table Top Video REVIEW of the WE AK74UN Gas Blowback Airsoft Rifle:
Photo of WE G18C Removed by Request from Glock "Renzulli Law Firm"
All references, photos and video claiming that any item in this review/video looks like a Glock or is a Replica of a Glock in any way shape or form have been removed from this post as requested by Glock"Renzulli Law Firm"
Type: Airsoft GBB Pistol.
Manufacturer: WE.
Model: G18C.
Materials: Metal & plastic.
Weight: 1.7 pounds (776 Grams).
Barrel: 4.5 inches, smooth bore.
Propulsion: (GBB) Gas Blowback.
Action: Semi & full auto.
Ammunition Type: Airsoft 6mm Plastic BB's.
Ammunition Capacity: 25 rounds.
FPS: Up-to 380 with longer barrel attached.
Trigger Pull: The trigger pull on the WE G18C is very nice and light since the blowback action does most of the work pre-cocking the action. There is a built in and working trigger safety like you would find on a real steel NAME REMOVED with about a quarter inch of take-up leading to a very light and crisp release.
Photo of WE G18C Removed by Request from Glock "Renzulli Law Firm"
Accuracy: Out of the Box the WE G18C shot great rather well for me when I did my pretest from the 20 foot mark, I found the WE G18C was dialed in pretty decent and shot very close to the bulls eye, maybe a hair to the left which is good since the sights are non adjustable. I shot a very respectable 5 shot 1.5 inch group in semi auto which opened up a great deal when I shot the remaining 15 rounds but at least they all seemed to stay pretty much on the paper which is not bad considering how much this gun jumps around in full auto.
Photo of WE G18C Removed by Request from Glock "Renzulli Law Firm"
Build Quality: The WE G18C Airsoft seems to be well made, and you will find lots of metal parts where they need to be, again similar as what you would find in a real NAME REMOVED. Fit and finish is nice but I did have an issue with the gas tube when I first got mine, it broke rendering the gun inoperable, a quick swap out with a new gas tube and all is well and so far after a number of magazine worth of shots the WE G18C is still working well and the new gas tube is holding up.
Photo of WE G18C Removed by Request from Glock "Renzulli Law Firm"
Realism: WE has taken some liberty with the markings on their WE G 18C copy, they are similar to what you would find on a real NAME REMOVED but not actually the same, as longs as you don't look too closely you will most likely be fooled into believing it's a licensed NAME REMOVED! As for how the WE G18C is built and how it operates, you will find it's a dead ringer to a real steel NAME RMOVED and even breaks down exactly the same.
Reviewed by: Replica Airguns.
Photo of WE G18C Removed by Request from Glock "Renzulli Law Firm"
Pros:
Photo of WE G18C Removed by Request from Glock "Renzulli Law Firm"
Cons:
Photo of WE G18C Removed by Request from Glock "Renzulli Law Firm"
Comments:
I have heard many people say they love WE products and then there are some that claim they are not all that well made! Other than my issue with the cracked gas tube, my WE G18C is holding up well and is working nicely, I think some earlier WE products lacked some refinement which may have led to problems but from what I have heard as of late, WE has stepped things up and is making a better product these days. My WE AK74UN is a testament to this as it is built like a tank and has tons of real stamped steel all throughout. Getting back to the WE G18C Airsoft GBB, it's really fun to shoot with it's amazing blowback and for a GBB pistol it shoots pretty hard and finds the target with easy.
Photo of WE G18C Removed by Request from Glock "Renzulli Law Firm"
My YouTube Video of the WE G18C Gas Blowback Airsoft Pistol:
Buy Airsoft gun in the Canada Store - Buy Airsoft gun in the US Store
I have a couple of guns I wanted to share with you all and no we do not sell them at this point in time and I can not say if we will or not down the road.
There is just no way we can carry every brand of gun and every gun from every brand, that said I still sometimes have my eye on a gun and will pick it up even if I have to pay full retail juts so I can add it to my collection and also do a review for all of you.
Photo of WE G18C Removed by Request from Glock "Renzulli Law Firm"
Today I showcase two Gas Blowback Airsoft guns from WE. I have been wanting to get an AK variant of some sort since there was a big whole in my collection after the RCMP came into my house and took my scary AK BB gun away. And if for some reason you feel this "again" legally imported through the CBSA non convertible airgun is in some way a concern, please feel free to come on over and have a good look, no SWAT team necessary this time. I am just around the corner from the police station and I make a good cup of coffee!
Getting back to this update, the other WE Airsoft gun is the WE G18C which like the WE AK74UN, also has semi and full auto select-ability. Both guns have excellent blowback kick with the AK74UN having a full travel blot which kicks like a mule and has a slower full auto cycle rate much like a real AK47.
Both guns have metal parts where you would find them on the real steel versions while the AK even goes so far to have actual stamped steel all over just like you would find on an AK.
Photo of WE G18C Removed by Request from Glock "Renzulli Law Firm"
I will be doing full reviews for both these WE GBB Airsoft guns so stay posted for those video reviews, in the meantime you can watch my Update Video showcasing both these WE Airsoft guns.
Buy Airsoft gun in the Canada Store - Buy Airsoft gun in the US Store
The rainy weather let up today so I grabbed up my Umarex - KWA MP7 Blowback Airsoft PDW and put it through its paces today. I was a bit surprised that my groupings from 30 feet away shooting from a semi-rested position where a bit spread out, mostly top to bottom. Perhaps the hop up was effecting the MP7? The good news is that shooting in full auto did not seem to make things any worse :) I was using .25 gram BB's for the accuracy test.
As for the Chronograph portion of this field test shooting review, the Umarex - KWA MP7 Blowback Airsoft Machine Pistol shot a bit higher than claimed at just over 400 fps using .20 gram BB's with Propane Gas. I had no problems shooting a full magazine of 40 rounds with a full gas fill up and the cycle rate stayed nice and high with very little cool down effect.
I really enjoyed shooting the Umarex - KWA MP7 Blowback Airsoft PDW, it has a nice sound with just the right amount of blowback to give it a good feel without throwing off the sights, the trigger was very light and responsive and I ended up preferring to use the pop up sights over the pistol sights as I was shooting mostly with the stock and fore grip open. Those Cans never had a chance!
All in all the Umarex - KWA MP7 Blowback Airsoft PDW is one of the coolest compact and ultra modern Airsoft guns I have had the pleasure to review and test out.
Watch my Field Test Shooting Vimeo Video for the Umarex - KWA MP7 Blowback Airsoft PDW:
Type: Airsoft Machine Pistol (PDW).
Model: H&K MP7 A1.
Materials: Metal & plastic.
Weight: 4 pounds, 7 ounces (2130 grams).
Barrel: 6.3 inches, smooth bore.
Propulsion: GBB - Gas Blowback.
Action: Semi-full auto selectable SAO.
Ammunition Type: Airsoft 6mm Plastic BB's.
Ammunition Capacity: 40 rounds.
FPS: 370.
Trigger Pull: The trigger pull on the Umarex - KWA H&K MP7 A1 is single action only as the charging handle has to be pulled back to open and release the bolt for the first shot fired. There is a trigger safety that must be engaged to fire, but it is not noticeable when shooting this Airsoft PDW. There is a short take-up and then a nice light release and short reset.
Accuracy: I was able to get decent accuracy in both semi auto and full auto burst with my H&K MP7 due to the mild to medium blowback. I would say I shot somewhere in the 2-3 spread with my 10 shot grouping from 20 feet out. When I do my full Field Test Shooting Review I will take it back a bit further and shoot form 30 feet out. I did get a bit higher then claimed fps right up into the 400 fps range when testing the Umarex - KWA H&K MP7 A1 on my Chronograph.
Build Quality: The Umarex - KWA H&K MP7 A1 Airsoft PDW is built extremely well, using near exact components that you would find on the real HK MP7, yes it has a plastic or polymer shell but that is what you would find on the 4.6mm x 30 real steel version. The Umarex MP7 Airsoft PDW does use lots of metal where it needs to be like in the internal housing, pins, bolt, barrel, rails and even the magazine. The fit and finish is bang on, this gun is as solid as they come!
Realism: I have to say the Umarex - KWA H&K MP7 A1 is pretty much a bang on copy of the real steel H&K MP7. The only telltale sign is the Umarex branding and warning label on the right side receiver, even the 6mm caliber markings are near impossible to make out on the underside right beside the serial number plate. Of course the red flash hider is a big "red flag" that takes away form the realism but for us here in Canada, a bit of red paint is all that is needed to fix that problem. just be aware that the flash hider is really glued on tight so plan that project accordingly!
Available at the: Canada Replica Airguns Store, US Replica Airguns Store
Pros:
Excellent attention to detail with lots of working parts.
Full H&K licensing and markings.
Good overall 400 fps power for a short barreled gas blowback gun.
Very nice trigger with working trigger safety.
Lots of metal parts where they need to be and would be on the real K&H MP7 PDW.
Semi auto & full auto selectable.
High capacity GBB magazine (40 rounds)
Sights are fully adjustable and offer two positions.
Built in for-grip and rear slide-out stock
Easy access to hop up system.
Cons:
Came with the orange tip, you may want to paint it. (hard to get off as it is glued on!)
May be too powerful for CQB skirmishes without some detuning.
Comments:
I really like the Umarex - KWA H&K MP7 A1 Airsoft PDW, it's my kind of Airsoft gun! I love the modern look, I love the features and the price is also really good for what you are getting here, a GBB gun that is super versatile and can be used in close our out at range. The build quality is what impressed me the most, this Airsoft gun is super solid, that combined with the attention to every detail would fool just about anyone that it's not the real deal until a very close inspection is done:) The Umarex - KWA H&K MP7 A1 reminds me of the other ASG MP9 KWA built PDW I reviewed earlier, they are like two peas in a pod but both with their own unique personalities.
Here is a quick Update video of three Airsoft guns, two of which I have touched upon before but have not gotten around to doing any actual Table Top or Field Test Shooting videos for you (The ASG Dan Wesson Airsoft Revolver and the Umarex P99 Blowback Airsoft Pistol). I also show you a new Umarex Airsoft Gas Blowback PDW, the H&K MP7 A1, a very realistic version I am sure will be of interest to many of my Airsoft fans.
I will be doing proper Table Top and Field Test Videos for each of these Airsoft guns as soon as I can get to them all, starting with the Umarex Gas Blowback H&K MP7 A1 Airsoft PDW so stay posted for these upcoming video reviews...
Testing out the ASG - Marushin CZ 75 Blowback Shell Ejecting Airsoft Pistol was not an easy one but I did manage to get thorough it! First there was the setup, I could not shoot the ASG Shell Ejecting CZ 75 Airsoft pistol on my deck or I would have fore sure lost most of my shell casings for it. So I decided to setup camp in my pool area where I have a nice large flat area off to one side, I put down a ginormous tarp in hopes to catch the radically flying shells but even this failsafe did not catch them all as I later found out ;)
As with most of my Field Test Shooting videos, I usually do a bit of a pre test to make sure the gun is functioning properly and so I shot a full magazine of my brass shells through the ASG CZ 75 and it worked like a charm, of course when I started recording the live video it decided not to work at all and I still do not know why? I was able to revert back to the plastic shell casing that came with my ASG CZ 75 Blowback Shell Ejecting Airsoft Pistol and they seemed to be working so I went with them for my testing. Interestingly enough the brass shells got much higher fps (around 300+) when I did my pretest compared to around the 250 average fps I was getting with the plastic shell casings.
Shooting on target proved to be better than I though once I raised my sight point up a bit, the gun likes to shoot a bit low but once I found the sweet spot I got three rounds within about 3/4 of an inch from just over 20 feet away in a semi rested position.
I would not recommend this Airsoft gun as an everyday shooter and there is no way you could use it in any type of Airsoft simulation as the ejected shell casings would get lost for sure and the cost to shoot the ASG CZ 75 would get very high indeed! It would be good for use in a movie or video where you wanted the realistic look of shells being ejected and did not want to use a blank gun or render the shells in post. And of course it is just really cool to have an Airsoft gun that has ejecting shells :)
Make sure to watch my Table Top Video Review for information and photos on the ASG CZ 75.
Watch my Vimeo video of the ASG CZ 75 Blowback Shell Ejecting Airsoft Pistol in action:
Type: Shell Ejecting 6mm Plastic BB Airsoft Pistols.
Model: CZ 75
Materials: Plastic slide & frame, some metal parts.
Weight: 1.4 pounds (616 grams).
Barrel: Metalnon-rifled smooth bore.
Propulsion: Propane, green gas.
Action: Blowback, single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 8 rounds.
FPS: 279+ fps.
Trigger Pull: The trigger pull on the ASG CZ 75 Shell Ejecting Airsoft Replica is single action only, unlike the real steel version that actually has a single and double action trigger. The single action trigger has a light to medium pull but does have a fair bit of take-up to it.
Accuracy: I did not pre-test the ASG CZ 75 as the shells fly everywhere and you really need to be able to retrieve them afterwards as the cost to replace the shell casing is rather high. I do plan to do a full Shooting Field Test where I will shoot the ASG Shell Ejecting CZ 75 through the chronograph, place some shots on a target and also capture the action of this pistol in slow motion with a high speed camera. So stay posted for that. I can say that from the few shots taken in my house, that it seems to shoot pretty hard and the shells really com flying out of this gun with force, I also noticed that a BB does have to be loaded into each shell for there to be enough back pressure to allow for a full slide blowback and ejection of each shell.
Click here to watch my Field Test Video Review for the ASG CZ 75 Shell Ejecting Airsoft Pistol.
Build Quality: Even though this gun is made mostly out of plastic and from what I can tell is also made in Taiwan, it has a very good overall fit and finish. The slide slop is next to none and the licensing and markings look great. There are metal parts where they really need to be like in the barrel, hammer, trigger, safety, slide catch, magazine and a few other internal parts.
Realism: The ASG Shell Ejecting CZ 75 Airsoft Pistol is one of the most ultra realistic Airsoft pistols I have seen and mimics a real steel gun right down to the shells being ejected, how cool is that! If it had more metal then that would really top it off. Even with the plastic slide and frame it is very realistic in almost every way and even field strips just like a real CZ 75 and is fully licensed. The only feature not true to the actual CZ 75 would be the single action only trigger.
Purchased from YouTuber: FuzzyDicePimp
Pros:
Cons:
Comments:
The ASG CZ 75 Shell Ejecting Blowback Airsoft Pistol is a very unique Airsoft gun, not very many Airsoft guns actually have ejecting shells. Just because of that I had to have it! Overall it is a pretty decent gun but I have yet to really test it out and that is the biggest shortcoming with this gun, you can't just shoot it anywhere as you need to shoot it in a place where you can recover your spent shell casings, unless of course you have all the money and shell cases in the world... That said it has a lot going for it other than the ejecting shells; Fully licensed and trademarked, blowback operation, full size drop out metal magazine and it's fully field strippable. I am sorry to say we don't offer it in out Canada or USReplica Airguns Store but we do have a similar all metal CZ 75 Airsoft offering in the form of the KJWorks KP-09 which I have done both a Table Top and Shooting Review for.
For the most part, this video is to test out some cameras and using them all together in a multi-camera scenario. I wanted to see how many camera angles I could shoot at one time and see how they would all work together when editing the video.
Cameras used:
My new Pivothead Recon Camera Glasses.
Sony HDR-AS15 Action Cam.
Drift HD170 Point of View Camera.
Nikon 1 with 10mm fixed lens.
Casio TRYX.
*All cameras where shooting in 1080p for this video.
I hope to use camera setups like this in the future, maybe not all at once but at least a couple at a time to give you some viewing options.
I picked out my WE SCAR GBB Airsoft Rifle for this test as it had a lot of mounting points and the Gas Blow Back makes for some great video action. Unfortunately My WE SCAR was not working at 100% but I still think I was able to pull off this test video either way.
Watch my Multi-Camera-Angle Test Video shooting the WE SCAR GBB AIrsoft Rifle:
Type: 6mm Plastic BB Airsoft Pistols.
Manufacturer:Cybergun
Model:Sig Sauer P226
Materials: Metal slide & frame.
Weight: 2 pounds (920 grams).
Barrel: Metalnon-rifled smooth bore.
Propulsion: Gas Blowback (GBB).
Action: Single and double action.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 26 rounds.
FPS: 383 fps (Using .12 gram BB's).
Trigger Pull: The trigger pull on the Cybergun Sig Sauer P226 Airsoft Replica is good in both single and double action. Once the slide is pulled back and released the first round is chambered and the hammer will remain back placing the P226 in single action mode, the pull is light and the take-up is fairly short, most of your shots will be in single action mode unless you use the de-cocker to lower the hammer for a subsequent double action next shot, double action shots are still pretty light but much longer in order to cock the hammer.
Accuracy: Shooting the Cybergun Sig P226 from 20 feet out in semi rested position I was able to get very good results. I placed 10 rounds in about 1.5 inches with the shot placement being a bit low possibly due to my barrel mod, adjusting the hop-up may bring the aim point back up to where it should be. The Sig Sauer P226 Airsoft Replica shot right around the 316 fps range while conducting my 5 shot average chrony testing which was lower than advertised but I was using much heavier .20 gram BB's. You can expect to get a full magazine worth of shots out of each gas fill-up but I did notice that as the magazine got colder it did tend to become much less efficient and also seemed to vent a lot of vapor.
Build Quality: The build quality is generally good and I was surprised at the finish on this model as the paint is not showing any wear marks so far, the fit is good with minimal slide and barrel wobble and everything is working very well with no problems so far with a fair amount of shots through it, guess you could say I like shooting this gun :) Most of the gun is metal with only the grips and a couple internal parts being plastic.
Realism: The Cybergun Sig Sauer P226 6mm Airsoft pistol is a replica of the real steel Sig Sauer P226 right down to the licensing and it really is a great looking and functioning Airsoft Replica. You can field strip this gun exactly like a real Sig and all the mechanical parts work just the same including a working de-cocker and adjustable front sight.
Available in the:Replica Airguns Store
Pros:
All metal pistol with good overall realistic weight to it.
Very crisp and firm full blowback operation.
Excellent fit and finish - paint seems to be wearing well.
Nice accurate looking and working Sig Sauer P226 Replica with licensing
Working de-cocker.
White dot sights for quick target acquisition.
Front sight is adjustable for windage.
Full size drop out magazine holds BB's and gas.
Fully field strip-able.
Buy this Airsoft Pistol in Canada - Buy this Airsoft Pistol in the US
Cons:
Comes with an orange tip not required for Canada.
Seemed to shoot a bit low for me, could adjust with hop-up a bit?
Only one magazine per Gas fill.
Comments:
I am a big Sig Sauer fan so it would take a lot for me to not give this gun a good review, with that said it performed pretty well, sure it was not the most powerful but I was using gas over CO2 so I was not expecting too much, it also shot a bit low for me but again that may have been because of the barrel mod so who really knows for sure at this point ;) And yes it came with that unsightly orange tip that I took short work of removing. At teh end of the day I still love it and it performed well without letting me down, just like a would expect from a real Sig Sauer!
My Vimeo Table Top Review of the Cybergun Sig Sauer P226 GBB Blowback Airsoft Pistol:
I usually do my Table Top Video Review first but this time around I did my Field Test Video Review first since I was all setup checking out a couple other guns at the time. When I do my detailed Table Top Video Review for the Cybgergun Sig Suer P226, I'll post the link here so stay tuned. If you have not already checked out my Barrel Mod Video for this same gun then check that video out where I remover the extended orange portion of the metal barrel and make the barrel flush with the end of the slide which is how the real steel version was originally made.
Getting back to the Cybergun Sig Sauer P226 GBB blowback Airsoft Pistol field test, as per usual I test this Airsoft semi auto gas blowback pistol on the Chronograph to see what kind of real world velocity I get and since I had some Green Gas on hand, I used it for this part of the review and got an average of 315 fps with a six shot string.
I also stepped back 20 feet and shot 10 times at my stationary target using a semi rested position (sand bag up front and kneeling in the back). Even though the Sig Sauer P226 shot a bit low I did get about a 1.25 inch group with the exception of one flyer that hooked down just a bit making the 10 shot group a bit wider at just under 2 inches. The low shot placement may have been caused by my barrel mod but since I did not do a before and after test, I can not say for sure?
Make sure to watch my YouTube Video of this Field Test as it also includes some nice slow-motion of the slide blowback at both 400 and 1200 frames per second.
Watch my full Video Field Test Shooting Vimeo Video below:
