View fullsize

Type: BB/Pellet air revolver.
Manufacturer/Distributor: Bear River.
Model: Schofield No. 3
Materials: Mostly metal with plastic grips.
Weight: 2.4 pounds. (1089 grams)
Barrel: 7 inch (178mm) smooth bore barrel.
Propulsion: 12 gram CO2.
Action: Revolver, single action only.
Ammunition Type: 4.5mm steel BB's and .177 Cal. Pellets.
Ammunition Capacity: 6 rounds.
FPS: 445fps.

View fullsize

Trigger Pull: The trigger pull on the single action only Schofield No. 3 CO2 BB-Pellet Revolver is what you would expect from a pistol of this design. Like the Colt Single Action Army the trigger pull is very short, light and crips, perfect for taking your time and getting a precise shot on target. You will of course have to cock the hammer manually before each shot ao no real action shooting.

View fullsize

Accuracy: I have not tested the Schofield No. 3 CO2 BB-Pellet Revolver in the Replica Airguns Sea Can Indoor Airgun Range but plan to get to it shortly. I will test out both 4.5mm Steel BB’s and some .177 caliber lead Pellets and see how the different ammo types effect both power and accuracy. Keep in mind the Schofield No. 3 CO2 BB-Pellet Revolver has a smooth bore barrel but I am pretty sure pellets will still perform well at 30 feet away.

View fullsize

Build Quality: The Schofield No. 3 CO2 BB-Pellet Revolver is built a lot like the Webley MK VI .455 CO2 Shell Loading Revolver line, perhaps even made in the same factory in Taiwan? The Schofield No. 3 CO2 BB-Pellet Revolver is pretty much an all metal construction other than the plastic grips and any internal seals. The fit and finish is excellent with a great overall weight in the hand. The pistol grips is a lot like what you have with the Colt Single Action Army pistol but the Schofield No. 3 CO2 BB-Pellet Revolver is a lot more front end heavy because of its beefy barrel.

View fullsize

Realism: In terms of replicating a real steel Schofield No. 3 CO2 BB-Pellet Revolver for sure looks and feels that part. The reassessed barrel and well hidden CO2 screw don’t give anything away that the Airgun version is not the real deal. But as with all of these shell loading Airgun Revolvers, the shells are actually closer to a .380 Caliber in diameter rather than a 45 which is what the real steel Schofield No. 3 CO2 BB-Pellet Revolver would be designed for.

Available in the: Replica Airguns Store

View fullsize

Pros:

• If you are like a bulky revolver with good weight to it then the Bear River Schofield No. 3 is it.

• Can shoot Steel BB’s or Pellets since it comers with both shell types.

• Recessed barrel.

• Well concealed CO2.

• Shell loading design that loads from the back so no need to remove shells if you wish not to.

• Single Action Only hammer and trigger action feel good, nice and light with short take-up and release.

• Fairly discreet safety location right behind the hammer so easy to get at.

• Super easy to load, pellet shells can even be reloaded with shells in the gun if you are using the pellet shells.

• Really like the Nickel Finish on this gun.

• Can get simulated Ivory grips for it if you prefer that look.

Cons:

• Sights are not adjustable.

• Warning instructions on side of the frame.

• Barrel is not rifled for pellet use?

• Only a Single Action Only Hammer and Trigger but true to the style of the gun.

View fullsize

Comments:

Yet another classic shell loading CO2 BB Revolver, and again the more the merrier in my option! I like that you get 12 shells with our kit version, 6 removable shells for 4.5mm Steel BB’s and 6 removable shells for .177 caliber Pellets. The Schofield No. 3 CO2 BB-Pellet Revolver is for sure a hefty revolver but the pistol grip is not super large so even people with smaller hands should not have a problem shooting the Schofield No. 3 CO2 BB-Pellet Revolver. The real problem is deciding which Shell Loading Airgun Revolver to buy now since we have so many to choose from… Classic or modern, nickel or black, or perhaps weathered?

My Table Top Review for the Schofield No. 3 CO2 BB/Pellet Revolver:

• Buy the Schofield No. 3 CO2 BB-Pellet Revolver in Canada:

• Buy the Schofield No. 3 CO2 BB-Pellet Revolver in the US:

View fullsize

Type: Blowback CO2 BB Pistol.
Manufacturer: Distributed by Umarex.
Model: Glock 19X.
Materials: Metal & Polymer.
Weight: 1.5 pounds (662 grams).
Barrel: Smooth bore 3.36 inch barrel (85.3mm).
Propulsion: CO2 x 1.
Action: Semi auto blowback, double action only trigger.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 18 round drop out full size metal magazine.
FPS: Claimed 360.

View fullsize

Trigger Pull: The trigger pull on the Umarex Glock 19X CO2 Blowback BB Pistol is what I would call a double action trigger mainly because there is an indexing of the BB from the magazine into the breach area every time you pull the trigger which means the take up is longer thanks a standard Glock take up and there is a little bit of friction from the mechanical mechanism that indexes the BB making the trigger feel more like a double action only trigger.

Accuracy: At this point I have not shot the Umarex Glock 19X CO2 Blowback BB Pistol so I can only quote what Umarex is saying in terms of FP2 which is 360. That said I have already done a full Table Top and Field Test Shooting Video for the Umarex Glock 17 Gen 3 CO2 Blowback BB Pistol which is essentially the same mechanical gun but with a slightly longer slide and barrel. In my Field Test Shooting Video for the Umarex Glock 17 Gen 3 CO2 Blowback BB Pistol I was able to get a 5 shot average fps of 363 in a bit cooler shooting conditions along with 2 inch 10 shot grouping from a 30 foot shooting distance.

View fullsize

Build Quality: The Umarex Glock 19X CO2 Blowback BB Pistol seems to be really well made. Fit and finish are nice and slide wiggle is minimal. There is a bit of a clanky sound when the slide cycles but not as bad as the Umarex Glock 17 Gen 3 CO2 Blowback BB Pistol. I also think the Coyote finish is the nicest looking with its black on tan two tone look.

Realism: The Umarex Glock 19X CO2 Blowback BB Pistol absolutely looks the part of a Glock 19X, sitting on the table and even holding it in your hand you are going to think it's the real deal until of course you drop the magazine and see that it is a CO2 mag. Mostly everything operates like a real Glock 17 but the slide is not a full blowback meaning it only goes back about 3/4 as much as a real Glock 17 slide would. One other noticeable difference is the ability to quickly field strip the Umarex Glock 19X CO2 Blowback BB Pistol, you will need to remove a pin since the take down tabs are non functioning and moulded into the frame.
Available From: The Replica Airguns Store.

View fullsize

Pros:

• Nice weight and feel to it, build quality seems good.

• Really nice looking replica of the real steel Glock 19X, love the Coyote color.

• Fully Glock licensed.

• Easy to see white dot sights front and back.

• Recessed barrel for added realism.

• Accessory rail for adding a laser or tactical light.

• Full size drop out metal magazine that holds the CO2 and 18 4.5mm steel BB’s.

• Safety built into the serial number plate area keeps it well hidden. 

• Warning instruction are nice and discreet under trigger guard

• Not bad feeling double action only trigger as the blowback pre-cocks the internal hammer/strike.

• 360 fps is decent for a blowback BB gun.

Cons:

• Does have blowback action but not full blowback.

• Slide sound is a bit clanky but not as bad as the 17 Gen 3 Blowback.

• Sight are non-adjustable which is common with low cost action shooters like this one.

• Would have liked to have seen more pristine packaging from Glock over the plastic clamshell

View fullsize

Comments:

It’s great to see Umarex expanding their live of Glock licensed Airguns and the addition of the Umarex Glock 19X CO2 Blowback BB Pistol is welcome! Some of you are not going to like the semi blowback action but it does mean you get higher fps and more shots per CO2 while still getting that simulated recoil form the blowback action. I honestly thing the Umarex Glock 19X CO2 Blowback BB Pistol is one of the most attractive Glock Airguns with it’s Coyote Tan frame and slide with black highlights, I also like the compact size for its shortened frame and slide over the Umarex Glock 17 Gen 3 CO2 Blowback BB Pistol. So many to choose for now but I guess that a good thing or perhaps just get them all!

• Buy the Umarex Glock 19X CO2 Blowback BB Pistol in Canada

• Buy the Umarex Glock 19X CO2 Blowback BB Pistol in the US

View fullsize

There are two parts to they video, the Halloween Costume Contest and what’s going on next week so make sure to watch it all…

Part 1 - 2019 Replica Airguns Halloween Contest Giveaway

Contest Rules:

• Must be 18+ to receive a prize.

• Canada & US winners only.

• Halloween Costumes must have a weapon of some sort in them.

• Must post a Halloween costume video to your YouTube channel.

• Your video must be named "2019 Replica Airguns Halloween Contest Giveaway".

• November 9th is the deadline date for you to get your video in.

• Must post a comment in this video letting me know you have a video for me.

• Must be a subscriber to the Replica Airguns channel.

• Must like this video

1st, 2nd and 3rd Prizes Awarded:

• Crosman Bushmaster Full Auto BB Rifle

• KWC 24/7 Blowback BB Airsoft Pistol

• Umarex Legends Makarov NBB BB Pistol

What’s going on next week?

I will be away competing in a Body Building Fitness Contest so there will not be any more videos that week.

You may have noticed I have been withering away this past couple of months. This is in preparation for a Fitness Contest I am going into. For a show like this you need to be super lean to be competitive.

I have been competing since 2015 mainly in Men’s Physique and have qualified myself over the years to compete at the National level in Amateur Body Building.

The competition I am going to is the GNC / ALLMAX Canadian National Pro Qualifier in Toronto. If I do really well I can possibly get an IFBB Pro Card. Getting an IFBB Pro Card means I would now be able to compete in Pro Body Building competitions.

In order to win the Pro Card I would need to win my hight class and then win the overalls against the other winners in their hight class.

To date I have come close to winning the IFFB Pro Card but just missed it on two occasions. I am hoping to get the IFBB Pro Card this times around but I know the competition will be very competitive.

I though I would feature the fact that we recently added some of the Tokyo Marui product line to our Canada Replica Airguns Store. Tokyo Marui is said to be one of the best Airsoft products on the market and they have been around for a while so they have had time to get it right! As Tokyo Marui is a Japanese based company they are restricted to only being able to use plastic frames and slides but even with this limitation the Tokyo Marui products that I have personally looked at are extremely well made.

In this Tokyo Marui New Product Preview Unboxing Video I take a look at 4 Tokyo Marui models; the Tokyo Marui Strike Warrior .45 1911 Gas Blowback Airsoft Pistol, the Tokyo Marui Hi-Capa 5.1 D.O.R (Direct Optics Ready) GBB Airsoft Pistol, the Tokyo Marui FNX-45 Tactical Gas Blowback Airsoft Pistol and lastly the Tokyo Marui VSR-10 Pro Sniper Bolt Action Airsoft Rifle.

View fullsize

Tokyo Marui Strike Warrior .45 1911 Gas Blowback Airsoft Pistol

• Type: Airsoft Pistol

• Manufacturer: Tokyo Marui

• Model: Strike Warrior .45

• Materials: ABS

• Weight: 816 g (1.8 lb)

• Length: 205 mm (8.1 in)

• Barrel: 74 mm (2.9 in), metal

• Power Source: Green Gas

• Action: Semi-automatic, blowback

• Ammo Type: 6mm airsoft BBs

• Ammo Capacity: 28 rounds

• FPS: 366

View fullsize

Tokyo Marui Hi-Capa 5.1 D.O.R (Direct Optics Ready) GBB Airsoft Pistol

• Type: Airsoft Pistol

• Manufacturer: Tokyo Marui

• Model: Hi-Capa 5.1 D.O.R.

• Materials: Polymer and metal

• Weight: 839 g (1.85 lb)

• Length: 220 mm (8.7 in)

• Barrel: 112 mm (4.4 in), metal

• Power Source: Green Gas

• Action: Semi-automatic, blowback

• Ammo Type: 6mm airsoft BBs

• Ammo Capacity: 31 rounds

• FPS: 366

View fullsize

Tokyo Marui FNX-45 Tactical Gas Blowback Airsoft Pistol

• Type: Airsoft Pistol

• Manufacturer: Tokyo Marui

• Model: FNX-45 Tactical

• Materials: ABS

• Weight: 830 g (1.8 lb)

• Length: 220 mm (8.7 in)

• Barrel: 113 mm (4.4 in)

• Power Source: Green Gas

• Action: Semi-automatic, blowback, single/double-action

• Ammo Type: 6mm airsoft BBs

• Ammo Capacity: 29 rounds

• FPS: 366

View fullsize

Tokyo Marui VSR-10 Pro Sniper Bolt Action Airsoft Rifle

• Type: Airsoft Rifle

• Manufacturer: Tokyo Marui

• Model: VSR-10 Pro Sniper vers.

• Materials: ABS

• Weight: 1.9 kg (4.2 lb)

• Length: 107.5 cm (42.3 in)

• Barrel: 430 mm (17 in)

• Power Source: Spring

• Action: Bolt action

• Ammo Type: 6mm airsoft BBs

• Ammo Capacity: 30 rounds

• FPS: 366

View fullsize

Type: Blowback CO2 BB Pistol.
Manufacturer: Distributed by Umarex.
Model: Glock 17 Gen 4.
Materials: Metal & Polymer.
Weight: 1.7 pounds (771 grams).
Barrel: 3.6 inches metal non-rifled.
Propulsion: CO2 x 1.
Action: Semi auto blowback, single action only trigger.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 18 round drop out full size metal magazine.
FPS: Claimed 300.

View fullsize

Trigger Pull: The trigger pull on the Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol is single action only so you will need to rack the slide first to not only chamber a 4.5mm Steel BB in the breach area but to also cock the internal striker. There is a working trigger safety on the Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol and you’ll also find the Glock 17 Gen 4 has a nice short and light trigger as you would expect similar to the real steel Glock. Perfect for fast action shooting!

Accuracy: At this point I have not shot the Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol so I can only quote what Umarex is saying in terms of FP2 which is 300. That sounds reasonable based on other Airguns like this that have that full blowback action since much of the CO2 gas is used to work the action of the slide. This not only reduces how many shots you can expect o get out of a single 12 gram CO2 cartridge but a reduction in power over non-blowback or even partial blowback CO2 Airguns.

View fullsize

Build Quality: The Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol looks to be well made overall with metal and plastic parts where you would find them on a real steel Glock 17 Gen 4. Fit and finish are nice and the slide wiggle is next to zero. The slide spring is very heavy and the sound of the slide when racked and released does not have that cheap metallic sound some blowback Airguns have. I am expecting some pretty decent blowback action recoil from the Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol when I do my Field Test Shooting Review!

View fullsize

Realism: The Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol 100% looks the part of a Glock 17 4th Generation, sitting on the table and even holding it in your hand you are going to think it's the real deal until of course you drop the magazine and see that it is a BB/CO2 mag. Mostly everything operates like a real Glock 17 including the slide catch release, trigger safety, magazine release and even the take down switches for quick field stripping and access to the adjustable hop-up, yes it is adjustable.
Available From: The Replica Airguns Store.

View fullsize

Pros:

• Good weight and feel to it, build quality seems very good.

• Really nice looking and full featured replica of the original Glock 17 Gen 4.

• Fully Glock licensed through Umarex.

• Easy to see white dot sights front and back.

• Recessed barrel for added realism.

• Accessory rail for adding a laser or tactical light.

• Full size drop out metal magazine that holds the CO2 and 18 4.5mm steel BB’s.

• Slide spring feels heavier than most full blowback Airguns, should have a heavy blowback recoil effect.

• Safety built into the serial number plate area keeps it well hidden.

• Comes with additional Backstraps for different sized hands.

• Warning instruction are nice and discreet under trigger guard.

• Great feeling single action only trigger as the blowback pre-cocks the internal hammer/strike.

• 300 fps is decent for a full blowback BB gun.

Cons:

• FPS could be higher but fairly inline with other full blowback CO2 air pistols.

• Sight are non-adjustable which is common with low cost Airguns like this one.

• Would have liked to have seen more pristine packaging from Glock..

View fullsize

Comments:

I know everyone has been waiting for Umarex to release the Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol and here it is finally, does it live up to all the hype and excitement? So far without shooting it I have to say yes, I am very pleased with how the Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol looks and feels. There is not too much more you can ask for in a replica Airgun of any kind… it looks like the real steel version, it feels like there real steel version, it functions like there real steel version. Hopefully it shoots just as well! If you haven’t bought one of the Umarex Glocks so far then this one is the one to have, but I say why not have them all :)

• Buy the Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol in Canada

• Buy the Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol in the US

View fullsize

Type: Gas Blowback Airsoft Pistol.
Manufacturer: G&G
Model: GPM1911
Materials: Metal slide, frame & Magazine.
Weight: 2.25 pounds (1020 grams).
Length: 8.66 inches (22.0 cm) total.
Barrel: 4.58 inches (11.7 cm), Metal non-rifled smooth bore.
Propulsion: Green gas or propane.
Action: Blowback, single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 25 rounds.
FPS: 300-330 fps.

Trigger Pull: The single action only trigger pull on the G&G GPM1911 GBB Airsoft Pistol is what you would expect from a traditional single action only 1911 trigger, a very short take-up and a crips and light release. Great for getting a lot fo shoots off quickly and accurately down range without making your trigger finger do a lot of work.

View fullsize

Accuracy: I have not done my actual Field Test Shooting video review for the G&G GPM1911 GBB Airsoft Pistol so I can into comment just yet but I will be making a Field Test Shooting Video for it as soon as I can and will post that here on the website and of course over on the Replica Airguns YouTube channel when I have it ready.

Build Quality: The G&G GPM1911 GBB Airsoft Pistol is in my opinion one for the nicer looking finishes wise and I would have to say it seems to also be one of the better quality 1911 Airguns out there, for sure a step up from a KWC blowback 1911’s and in line with what KWA and KJWorks is making these days which is good quality. The G&G GPM1911 GBB Airsoft Pistol is one of the heavier Airsoft 1911 Blowback Pistols which makes me think the metal is a bit higher quality where it needs to be. Tolerances are nice and tight and the blowbacks action is very heavy.

View fullsize

Realism: The G&G GPM1911 GBB Airsoft Pistol like most of these full blowback 1911 Airguns, Steel BB or Airsoft BB, is super realistic with an all metal build. All the real steel working parts like the slide catch release, back strap safety and pretty much everything else function as they should. The G&G GPM1911 GBB Airsoft Pistol even field strips like a traditional 1911 pistol. Not sure what you could do to make it more authentic for an Airgun?

Available in the: Replica Airguns Store

View fullsize

Pros:

• Nice high capacity magazine compared to other GBB 1911 Airsoft pistols.

• Heavier than most Airsoft 1911’s.

• All parts fit nice and tight, tolerances are very good.

• Working back-strap safety.

• No ugly red tip.

• Finish is really nice, gun looks really good.

• Expect to get decent amount of shots per gas fill.

• Micro Gas Filter and Whirl Cylinder Valve help to manage gas efficiency and reduced frost buildup.

• Traditional adjustable Hop-up.

• Full Size Dropout metal magazine pretty standard on Airsoft pistols.

• Comes with high quality hard shell case and speed loader.

Cons:

• Sights are pretty basic, no white dots and non-adjustable as you would expect on a 1911 A1.

• Very simple Airsoft gun, no modern bits and pieces on it.

• FPS could be a bit higher but fine for close quarters.

View fullsize

Comments:

The G&G GPM1911 GBB Airsoft Pistol is for sure one of the nicer 1911 A1 styled Airsoft pistols, inline with KWC and KJWorks. It does come in a little bit heavier and seems to have more blowback recoil action which is nice. All I need to do now is find out how well it shoots! If it’s not half bad then it is for sure worth the price which by the way is a little bit cheaper than a KWA or KJWorks 1911 and about the same price as a KWC 1911. So many choices I know but that’s a good thing :)

My Table Top Review of the G&G GPM1911 GBB Airsoft Pistol:

• Buy the G&G GPM1911 GBB Airsoft Pistol in Canada

• Buy 1911 Airguns in Canada

View fullsize

Type: BB air pistol.
Manufacturer: KWC.
Model: Makarov PM NBB.
Materials: Mostly metal.
Weight: 1.76 pounds (800 grams).
Barrel: 3 inches, metal smooth bore.
Propulsion: CO2 x 1.
Action: Semi auto, double action only.
Ammunition Type: Steel BB's 4.5mm.
Ammunition Capacity: 18 rounds.
FPS: 394 fps/ 120 m/s.

View fullsize

Trigger Pull: The trigger pull on the KWC Makarov PM CO2 NBB BB Pistol is pretty decent for a double action only trigger, certainly light enough for some fairly fast action shooting without tiring your trigger finger too much. It would have been nice to have been able to cock the hammer for some slower and more precise single action shots.

View fullsize

Accuracy: So far I have not had the chance to test out the shooting performances for the KWC Makarov PM CO2 NBB BB Pistol, but I am expecting it to get sub 2 inch 10 shot groupings from 30 feet out and hopefully the KWC Makarov PM CO2 NBB BB Pistol will chronograph in close to the 400 claimed fps. Watch for my Field Test Shooting Video down the road.

View fullsize

Build Quality: The KWC Makarov PM CO2 NBB BB Pistol is a pretty basic CO2 BB Airgun, basically two metal halves of the frame screwed together and not a lot of working parts. It’s almost all metal except for the grips and hammer and has a good weight and solid feel to it so I expect it to hold up well over time. The fit and finishes seem just fine but it does have some noticeable seems going all around the Airgun where the two halves join together.

View fullsize

Realism: The KWC Makarov PM CO2 NBB BB Pistol at first looks like a real steel Makarov, it’s about the right size and weight, has a recessed barrel and no CO2 tab on the bottom so overall a good looking replica. It’s when you look a little bit closer look that you can really tell, from the lack of an open ejection port to the small screws on the right hand side of the KWC Makarov PM CO2 NBB BB Pistol. When you start to play around with it you will notice the hammer is plastic and only for show and of course not being a blowback gun the slide and slide catch release do not function at all.

View fullsize

Pros:

• Full metal frame.

• All metal full size drop out magazine that holds the BB’s and CO2.

• Working safety, and magazine release.

• Because it’s NBB it will get higher fps and more shots per CO2.

• No ugly CO2 tab on the magazine.

• Seems to have a decent double action only trigger.

• Very affordable at around $70 Canadian.

• Less moving parts means less to go wrong for longer reliability.

Cons:

• No blowback operation so no single action trigger or simulated recoil.

• Ejection port is not cut out and hammer is only for show.

• Has those ugly screws on one side of the frame.

Comments:

View fullsize

Most of you probably already know I am a bit of a Blowback operation Airgun snob so when I review Non Blowback Airguns I am generally not as excited. What can I say, I just like the simulated recoil Blowback offers and the fact that Blowback Airguns will generally allow for a much lighter and shorter single action trigger. The plus side to a Non Blowback Airgun is going to be four main points: Usually a lower price tag, faster fps, more shots per CO2 and better longevity of the gun since there are a lot less moving parts to wear or break. It really come down to what you prefer, but the good news is you can have your choice of a Non Blowback Makarov like the KWC Makarov PM CO2 NBB BB Pistol or you can go with the blowback KWC Makarov PM CO2 Blowback BB Pistol. Or better yet, why not both!

My Video Review for the KWC Makarov PM CO2 NBB BB Pistol:

• Buy the KWC Makarov PM CO2 NBB BB Pistol in Canada

• Buy the KWC Makarov PM CO2 NBB BB Pistol in the US

View fullsize

In this Field Test Shooting Review Video I test out both the 3.8 Compact and 4.5 Full Size Air Venturi Springfield Armory XDM Blowback CO2 BB Pistols to see how they perform in both velocity and accuracy. I thought it would be interesting to see how the shorter and longer barreled versions compare side by side and if we sill see a difference in power and down range accuracy…

As always I use a brand new 12 gram CO2 along with 5.1 gran zinc coated steel BB’s for my testing and on this day the temperature in the Sea Can Indoor Airgun range was around 24 degrees Celsius or 75 degrees Fahrenheit.

View fullsize

Starting with the Chronograph test I placed 5 rounds through each gun and averaged out the result. The 3.8 inch Compact Air Venturi Springfield Armory XDM Blowback CO2 BB Pistol averaged 281 fps while the 4.5 inch Full Size Air Venturi Springfield Armory XDM Blowback CO2 BB Pistol averaged 303 fps. So it looks like the additional .7 inches increases the velocity about 20 fps!

I then shot 10 steel BB’s from each Air Venturi Springfield Armory XDM Blowback CO2 BB Pistol on my paper target setup 30 feet down range using a rested and seated shooting position. The 3.8 Compact Air Venturi Springfield Armory XDM Blowback CO2 BB Pistol shot about a 2 inch grouping but seemed to shoot rather low, just outside the outer rings so about 3-4 inches below the bullseye. Windage was good pretty much dead center left to right on the target.

View fullsize

I did find the 4.5 Air Venturi Springfield Armory XDM Blowback CO2 BB Pistol to shoot a little bit low as well but not as low as the 3.8 XDM staying inside the rings and about 2 inches below the bullseye, again all within about 2 inches and well center left to right.

At the end of the day both the 3.8 and 4.5 Air Venturi Springfield Armory XDM Blowback CO2 BB Pistols perfumed flawlessly for me with really great SAO triggers and a nice heavy blowback feel giving a noticeable recoil effect. The 3.8 Springfield Armory XDM did shoot a little bit slower as expected and a little bit lower on the target. It all comes down to choice and there are many with the Air Venturi Springfield Armory XDM Blowback Air Pistols. Airsoft or Steel BB, 3.8 inch or 4.5 inch, all black or silver slide. You decide which one is best for you :)

• Buy Springfield Armory XDM Blowback Airguns in the Canada Store

• Buy Springfield Armory XDM Blowback Airguns in the US Store

View fullsize

For more of a traditional Table Top Features and Specifications video for the Air Venturi Springfield Armory XDM Air Pistol, then watch my Table Top Review for the Airsoft Springfield Armory XDM here.

Since both the 6mm Airsoft and 4.5mm Steel BB Air Venturi Springfield Armory XDM’s are nearly identical with only a few exceptions, I didn’t feel it was necessary to make another almost identical Table Top Video for the Steel BB firing Air Venturi Springfield Armory XDM. Instead I want to focus mainly on the differences in this comparison video.

View fullsize

Watch my Video for all the main differences but in short here they are for those reading this post:

• Steel BB version uses CO2 while the Airsoft version uses Green Gas or Propane.

• There is no orange tip on the Steel BB version while Airsoft versions come with orange tips installed.

• Steel BB versions have 20 round full length magazines for both the 3.8 and 4.5 inch versions, while the Airsoft 3.8 compact comes with the shorter 14 round magazine and the Airsoft 4.5 comes with a longer 25 round magazine.

• FPS for the Steel BB versions are 270fps for the 3.8 and 325fps for the 4.5, comparably the Airsoft 3.8 is claimed to have 280fps with the 4.5 version a bit higher at 330fps. (Keep in mind that steel BB’s weigh more at around .33 grams compared to the .20 gram plastic Airsoft BB’s used for testing).

• I did notice that on the sliver slide version, my earlier Airsoft 4.5 had more of a parkerized metallic finish while my same Steel BB version I received at a later time had more of brushed stainless look to it. Air Venturi has since informed me that all silver slide version will now have the brushed stainless finish.

• Buy Air Venturi Springfield Armory XDM Airguns in the Canada Store

• Buy Air Venturi Springfield Armory XDM Airguns in the US Store

View fullsize

Type: BB Rifle.
Manufacturer: Crosman.
Model: Bushmaster MPW.
Materials: Metal & plastic.
Weight: 6.5 pounds (4.98 kilograms).
Length: 21 inches (Stock all the way in).
Propulsion: 12 gram CO2 dual cartridges.
Action: Blowback - single action only.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 25 rounds.
FPS: 430fps.
Rate of Fire: 1400 rounds per minute in full auto

View fullsize

Trigger Pull: The trigger pull on the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is single action only since the charging handle must be cocked first before you can shoot it. The trigger is short and fairly light as you would expect from an AR type trigger action. The bonus with the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is when you switch it over to full auto mode and just one pull and hold of the trigger will empty the 25 round magazine in just seconds.

View fullsize

Accuracy: So far I have not actually shot the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun but since the internals are exactly the same as the Crosman DPMS SBR CO2 Blowback BB M4 I have already fully review, then I will expect it to performa about the same until I do my Field Test Shooting Review. You shoudl expect about 400 fps in semi auto mode and in terms of accuracy I hope to get a similar 3/4 inch 10 round semi auto grouping from 30 feet away. Full auto will open up the group a bit but not too much, maybe around 2 inches…

View fullsize

Build Quality: The Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is well made all around. Weighing in at 6.5 pounds without any add on accessories it feel solid and well built. There is a lot of metal going on inside and out of this rifle but keep in mind the top and bottom receiver are plastic with metal parts where they need to be like in the internals, pretty much all the working parts are metal, the magazine is full metal, the buffer tub is metal, charging handle, selector switch, magazine release, bolt release, trigger and of course the barrel is metal.

View fullsize

Realism: The Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is about as real as you are going to get in a CO2 Blowback AR/M4 styled Airgun. You can even take it apart and split the top and bottom receivers like the real steal version. The blowback action gives you some recoil but more importantly offers a true single action trigger and of course the full auto ability we all love. Almost all the working parts work like they would on a real M4 other than the forward assist which is moulded into the receiver.

View fullsize

Pros:

• Super realistic working M4/AR 4.5mm BB Rifle just like the DPMS SBR but in a different flavor.

• Full blowback operation with both semi and full auto shooting, can feel the blowback operation rocking the gun.

• Good weight and feel to it.

• Almost everything works exactly like the real steel version. (Charging handle, dust cover, bolt release, magazine release, selector switch…)

• Duel CO2 full metal drop out magazine that holds the 25 4.5mm steel BB’s.

• Adjustable and customizable AR buttstock.

• Included red dot sights and ability to add pop-up iron sights.

• Lots of rails for mounting additional cool hardware.

• Built in Mock Suppressor.

View fullsize

Cons:

• Receiver is plastic but well made and does not compromise feel or weight since there is lots of metal throughout this gun.

• No iron sights included.

• No fore grip included like the DPMS SBR.

View fullsize

Comments:

The Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is really pretty much the same as the Crosman DPMS SBR CO2 Blowback BB Full Auto Rifle with more or less Cosmetic changes. One big advantage over the DPMS SBR is the AR comparable buffer tube which allows you to swap out any AR styled rear stock you choose! You also get an included Red Dot sight since there are no Iron sights. The Crosman Bushmaster MPW CO2 Blowback BB Machine Gun is super customizable with its quad-rail so go ahead and dress yours up with Iron sights, lasers, tactical lights, foregrips or whatever else you can dream up.

My Table Top Video of the Crosman Bushmaster MPW CO2 Blowback BB Machine Gun:

• Buy the Crosman Bushmaster MPW in Canada

• Buy the Crosman Bushmaster MPW in the US

View fullsize

Type: Air Pistol.
Manufacturer: Sig Sauer ASP
Model: Sig Sauer P365.
Materials: Metal and polymer build.
Weight: .8 pounds (363 Grams).
Barrel: 3.2 inches - smooth bore.
Propulsion: 12 gram CO2.
Action: Blowback singe action only.
Ammunition Type: 4.5mm steel BB’s.
Ammunition Capacity: 12 round full size drop out magazine.
Max FPS: 295.

View fullsize

Trigger Pull: The trigger on the Sig Sauer P365 CO2 Blowback BB Pistol is a single action only trigger so you will need to rack the slide to cock the trigger and internal striker, after which the blowback operation will do this for you. When the Sig Sauer P365 CO2 Blowback BB Pistol is unloaded the trigger pull length is short and the trigger weight is fairly light. That said when you load the full size drop out magazine with steel 4.5mm BB’s, the trigger pull weight increases significantly. This is because the inner barrel comes back and into the magazine when the trigger is pulled allowing for a better seal between the barrel and magazine which increases power and CO2 efficiency. The drawback to this is more friction on the trigger when you pull it with a loaded magazine.

View fullsize

Accuracy: Since I have not done my Field Test Shooting Review for the Sig Sauer P365 CO2 Blowback BB Pistol, I can not comment fully on how the Sig Sauer P365 CO2 Blowback BB Pistol will perform in terms of accuracy and power. I did have the chance to shoot off a couple magazines worth of ammo in the yard shooting at some pop cans around 30 feet away and the Sig Sauer P365 CO2 Blowback BB Pistol seemed to hit them most often then not. I was a bit surprised by the snappy blowback and loud pop the Sig Sauer P365 CO2 Blowback BB Pistol made and will not be surprised if it is able to hit the claimed 295 fps velocity using a brand new CO2.

View fullsize

Build Quality: The Sig Sauer P365 CO2 Blowback BB Pistol has a metal and plastic (polymer) build, the slide is metal along with part of the full size magazine and I am sure several inner parts will also be metal. The frame along with section of the magazine are plastic. It’s kind of hard to tell if the trigger, safeties, slide catch and take down leavers are metal but I believe they are with the magazine release being plastic. The Sig Sauer P365 CO2 Blowback BB Pistol is not the heaviest Airgun coming in at about .8 pounds but for its size it feels good. Fit and finishes are also good.

View fullsize

Realism: The Sig Sauer P365 CO2 Blowback BB Pistol is a replica of the real steel Sig Sauer P365 which is a 9mm striker fired everyday cary compact pistol. It looks and feels the part with most external mechanical working parts mimicking the real steel version well enough. I was not able to easily field strip the Sig Sauer P365 CO2 Blowback BB Pistol since the takedown leaver seems to be only for show. One main difference between the CO2 Airgun and Real Steel version of the Sig Sauer P365 is the use of polymer in the frame for the Airgun version while the real steel Sig Sauer P365 has a metal frame. I imagine this is because 9mm rounds pack some punch and a small polymer frame may not have been up to the job. not something to be concerned with in a CO2 version of the same pistol.

Buy Sig Airguns in the: Replica Airguns Store

View fullsize

Pros:

• One of the smallest CO2 BB Airgun on the market and somehow Sig managed to get a full size drop out magazine in it?

• Good overall replica of the real steel P365 Sig Sauer pistol in terms of looks and operation.

• Full Sig Sauer markings and licensing.

• Working ambidextrous safeties and slide catch release (locks back after last shot).

• Snappy blowback feel.

• White and green dot sights front and back.

• Rail for accessories (Maybe).

• Recessed barrel opening and open ejection port for added realism.

• Warning instructions are super discreet!

View fullsize

Cons:

• SAO trigger gets a bit harder to pull when loaded up with BB’s.

• Has a polymer frame as compared to the metal frame on the real steel version.

• Not easily field strippable..

View fullsize

Comments:
The Sig Sauer P365 CO2 Blowback BB Pistol was a real show stopper at this years SHOT Show, I was amazed that Sig Sauer was able to actually figure out a way to fit a full size drop out magazine that holds both the CO2 and 12 steel BB’s in such a compact Airgun. The Sig Sauer P365 CO2 Blowback BB Pistol is even small than the Walther PPK in many ways so great work by Sig in figuring out how to engineer their new Sig Sauer P365 CO2 Blowback BB Pistol. I also think the the Sig Sauer P365 CO2 Blowback BB Pistol is a great replica of the real steel version in looks, feel and function which is what we are all looking for when considering buying a new CO2 replica Air Pistol. My initial test shots went well and make me feel optimistic about how the Field Test Shooting Video will go when I make it shortly.

My Table Top  Review of the Sig Sauer P365 CO2 Blowback BB Pistol:

• Buy the Sig Sauer P365 CO2 Blowback BB Pistol in Canada

• Buy the Sig Sauer P365 CO2 Blowback BB Pistol in the US

Again I have some new products to show everyone. Some we got a bit of a preview of when I was at SHOT Show 2019 earlier this year but now I have them in my hands to show off and of course will be doing full Table Top and Filed Test for anything new as soon as I can get to them.

View fullsize

Starting with Sig Sauer, they sent me their brand new Sig Sauer P365 CO2 Blowback BB Pistol. This was probably one of my favorite new Air Pistols at SHOT Show simply because it is so small and somehow Sig was able to find a way to put a full size drop out metal magazine that holds both the CO2 and BB’s in it. This is one I am really looking forward to testing out in the Indoor Sea Can Airgun Shooting Range.

View fullsize

Another fantastic product is Crosman’s DPMS Full Auto CO2 BB Rifle which was pretty much perfect the first time around. Well at SHOT Show this year Crosman updated it a bit mainly with some cosmetic changes and now is offering the Crosman MPW, a slightly shorter version of the DPMS and now with an AR Compatible Stock for customizing your Crosman’s MPW Full Auto CO2 BB Rifle.

View fullsize

Yet one more item I was drooling over at SHOT Show 2019 where the Air Venturi Springfield Arms XDM Air Pistols being offered in GBB Airsoft and CO2 BB models along with 3.8 and 4.5 inch versions. It looks like the GBB Airsoft venisons where first out of the factory and I was able to get them in two styles, the Air Venturi Springfield Arms XDM 3.8 GBB Airsoft and Air Venturi Springfield Arms XDM 4.5 GBB Airsoft.

View fullsize

So maybe not as exciting… I also take a look at a NBB CO2 BB Makarov from KWC that is pretty basic but is much less expensive and will offer higher FPS and more shots per CO2 being that it is Non-blowback Airgun. It will be interesting to see how it compares performance wise to the KWC Full Blowback CO2 BB version.

View fullsize

Last but also super cool and I know it’s not really as Airgun related but still something I think everyone will be interested in is the Pocket Shot Pro Arrow Pouch with D-Loop. I reviewed the Pocket Shot “Slingshot” a while back, this new product allows you to use standard Arrows with their new Arrow Pouch getting around 40 pounds of pull and it comes with a trigger release. By the way the Pocket Shot Pro Arrow system is legals to hunt deer with in most US States, I’m not sure about Canada but perhaps here too?

View fullsize

The question comes up often about which Airgun to buy. Customers are wondering when they are looking at a specific Airgun and they see several similar products but from different companies, are they the same gun and if so which one should they decide to buy?

One of the biggest Airgun suppliers out there is for sure KWC, their BB and Airsoft guns are redistributed through companies like Umarex, Crosman, Sig Sauer, ASG, Gletcher and more. Often times the companies that redistribute KWC Airguns hold licensing agreements with real gun manufacturers like Smith & Wesson, Glock, Colt, Beretta, Sig Sauer, Taurus to name a few… KWC makes the Airguns in their Taiwanese factory but they are not allowed to put a real gun manufacturer license on the Airguns they distribute directly so KWC distributed Airguns will generally be all black.

View fullsize

I have also seen companies like Umarex distribute a new KWC Airgun that I have not seen yet from KWC, I believe KWC works with these big name Airgun companies directly and will build a new gun or variation of an existing KWC Airgun for them and give that Company an exclusive for a period of time. KWC will eventually regain the rights to sell that Airgun model directly after 6 months to a year.

Now that you know a little bit more on how it all works let’s get back to whether you should buy a KWC branded Airgun or other Brands same Airgun. It really comes down to I would say three factors. Do you want a Licensed version of the Airgun you are buying? Is there a price difference? Which gun is available to buy when I am ready to buy?

View fullsize

When you buy the Licensed version of the KWC Airgun redistributed through a third part Airgun Company you will often get a lot more writing on the Airgun than just the Gun Manufacturers name. Warning information comes to mind and does not look all that attractive on the slide where it is usually found in bright white lettering. If you like a cleaner look and don’t mind the lack of licensing then the KWC distributed version will generally be all back, nice and clean looking.

View fullsize

You would think buying the KWC Version that is sold more directly to the end customer would be the less expensive of the options because less hands are involved in the selling process. This is not always true, it is more about supply and demand, if more people want the cleaner looking KWC version but it’s harder to get ahold of than the price of the KWC version may actually be higher than say the Umarex or Crosman version. So shop around if price is the deciding factor as the guns are going to be mechanically the same with just some slight cosmetic differences between them.

Lastly, availability maybe what eventually leads you to buy a KWC version over an Umarex, or Crosman or Sig version since if the gun is not in stock well you may have limited options and so the one in stock is going to be perhaps your only option! Don’t feel like you got short changed, again these guns are virtually all the same at the end of the day no matter if you buy it from KWC, Umarex, Crosman, Sig Sauer, ASG, Gletcher or whomever.

• Buy KWC Airguns in Canada

• Buy KWC Airguns in the US

The subject of Red/Orange tips on Airguns is often a bit controversial, the idea behind putting a Red or Orange tip on an Airgun is to distinguish an Airsoft gun from a “Real Gun”. Is this really a good idea? Do we really want to encourage people from treating an Airgun as if it was not real? Does the Orang/Red tip give people the wrong idea that an Airgun can be used with less responsibility than a real gun and if so what are the consequences.

View fullsize

In my “Is a Red or Orange Tip on an Airgun a Good or Bad Idea” YouTube Video I dress two main issues I have with putting Red or Orange Tips on Airguns and in this case I am talking mainly from the perspective of a person living in North America where we often see Red/Orange tips on Airsoft guns that come from the US. In Canada our legally imported Airsoft guns do not require Red or Orange tips since they are actually considered unregulated firearms as an Airsoft gun has been determined to be able to cause serious injury.

View fullsize

Main Point Number 1:
Does adding a Red or Orange tip give the false impression that an Airgun is a toy and can be treated just like a toy? Would you give an Airgun to a child unsupervised? Can an Airgun cause a serious injury or even death, and if so why is an Airgun potentially less dangerous than a “Real Gun”?

View fullsize

Main Point Number 2:
Does the additional a Red/Orange Tip on and Airgun make it harder for law enforcement to make a decision when they are forced to act on someone that appears to have a gun and is using it in a dangerous way? What do they do when a person is brandishing what looks to be a firearm but it appears to have a Red or Orange Tip on it? What if someone simply painted the tip Red or Orange to throw people off and make them second guess themselves allowing the perpetrator critical time to get the first and most critical shots off?

I am not trying to stir up any pots here but simply bringing up concerns I have with adding Red or Orange Tips to Airguns. Maybe the powers that be need to reconsider if a Red or Orange Tip on an Airgun is a good or bad idea?

• Buy Airgun related products in Canada

• Buy Airgun related products in the US

View fullsize

It’s started, save 15% on select products in the Replica Airguns Canada Online Store from now until June 16th!

• www.replicaairguns.ca/fathers-day-sale

To celebrate Victoria Day here in Canada we are having a SALE over in the www.ReplicaAirguns.ca Online Store! Everything will be 10% OFF! Sale will go over this weekend and end Monday night.

We are featuring a couple of newer products in the Canada Store, one from G&G and one from Umarex…

View fullsize

G&G GTP9 Gas Blowback Airsoft Pistol

• Type: Airsoft Pistols

• Manufacturer: G&G

• Model: GPT9

• Materials: Metal & Polymer

• Weight: 680 g (1.5 lb)

• Barrel: Smoothbore

• Power Source: Green Gas

• Action: Semi-Automatic

• Ammo Type: 6mm Airsoft BBs

• Ammo Capacity: 23 Rounds

• FPS: 370

View fullsize

Umarex Beretta M9A3 Full Auto CO2 BB Pistol

• Full-Auto

• Semi-automatic repeater

• Blowback action slide

• Authentic FDE Color Scheme

• Threaded muzzle for mock suppressor

• Full size 18-round BB magazine

• 12 gram CO2 capsule (not included) loads in the magazine

• Fits holsters made for M9A3

• Under muzzle rail for light / laser

• Clean, crisp trigger

• Authentic ambidextrous safety

• Tough polymer frame

• Beretta vertical grip

View fullsize

Type: Gas Blowback Airsoft Pistol.
Manufacturer:  G&G
Model: GTP9
Materials: Polymer slide & frame.
Weight: 1.5 pounds (680 grams).
Length: 8.85 inches (22.5 cm) total
Barrel: 4.4 inches (11.2 cm), Metal non-rifled smooth bore.
Propulsion: Green gas or propane.
Action: Blowback, single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 23 rounds.
FPS: 350-400 fps.

View fullsize

Trigger Pull: The single action only trigger pull on the G&G GTP9 GBB Airsoft Pistol is light with just a little bit of take-up. Since there is a built in trigger safety you will need to make sure your finger is firmly on the trigger or you may notice the trigger safety binding a little bit. Other than that the trigger pull is smooth.

View fullsize

Accuracy: I have not done my actual Field Test Shooting video review for the G&G GTP9 GBB Airsoft Pistol but I did get the chance to shot it quickly in my Sea Can indoor shooting range. Blowback felt pretty decent considering the slide is polymer and I was able to get most of my shots on or near the bullseye from about 25 feet out free standing. I did really like the more open sight setup as it allowed me to see over and under my target giving me a bigger picture of what I am lined up with.

View fullsize

Build Quality: Like pretty much all G&G Airsoft guns, the G&G GTP9 GBB Airsoft Pistol build quality is very high quality all around. Fit and finish where excellent and even though the slide is polymer the G&G GTP9 GBB Airsoft Pistol felt solid in the hadn't and had a decent overall weigth to it. I know plastic slides are not always everyones first choice but the slide on the G&G GTP9 GBB Airsoft Pistol did have good weight to it allowing for decent blowback feel and in many cases plastic will be more durable than pot metal or zinc metal slides and stand up to abuse and wear and tear better.

View fullsize

Realism: The G&G GTP9 GBB Airsoft Pistolis not a replica of any specific real steel gun in production but it is designed to look like your common modern pistol and it seems many of these modern pistols have some Glock like tributes, that square shaped slide, square trigger guard and shallow thumb rest. That all said the G&G GTP9 GBB Airsoft Pistol has all of the right stuff we look for in a replica pistol like a full size drop out metal magazine, full blowback operation and of course the ability to field strip the gun juts for fun or for occasional cleaning.

Available in the: Replica Airguns Store

View fullsize

Pros:

• Most external parts on gun are polymer so you will not get finish wear or noticeable scratches on it. Also keeps the weight down.

• Threaded barrel for adding a mock suppressor.

• Comes with two different sized Grip Back-straps to accommodate small and larger hands.

• Expect to get decent amount of shots per gas fill (around 3-4 magazines).

• Adjustable Hop-up that is super easy to access with no gun disassembly required.

• Micro Gas Filter and Whirl Cylinder Valve help to manage gas efficiency. 

• Full Size Dropout metal magazine pretty standard on Airsoft pistols these days.

• Rail for accessories if you choose.

• Open white dot sights make it super easy to see your target.

• Dual safety system, cross bolt on frame and trigger safety.

• Narrow and light, would make a great lightweight side arm for Airsoft battles.

View fullsize

Cons:

• Some people may not like the polymer slide?

• Sights is non adjustable but mine got bullseyes from 25 out.

View fullsize

Comments:

Normally I am not a big fan of all plastic or polymer guns but in the case of the G&G GTP9 GBB Airsoft Pistol I think it makes sense, G&G has done a great job of making the plastic slide feel solid and have good overall weigth to it so you still get that weighty feeling int he hand and enough blowback to feel the recoil with each shot. I also think the G&G GTP9 GBB Airsoft Pistol will be more durable long term and look better even if it gets knocked around since you won’t see the scratches and dings that you would see on a metal gun. The G&G GTP9 GBB Airsoft Pistol also has a ton of stuff going on that I have not seen on other guns to date like the open rear sights for better sight framing and that super cool easy to access hop-up adjustment system.

My Table Top Review of the G&G GTP9 GBB Airsoft Pistol:

• Buy the G&G GTP9 GBB Airsoft Pistol in Canada

In this Update Video we take a look at some BB and Airsoft pistols I have already reviewed but in a slightly different form factor. They are all Umarex Legends pistols but two of them (The P.08 and M712) are WWII Special Editions versions with that aged weathered look to them.

The Umarex Single Action Army Wildcard .45 is in 6mm Airsoft which I have so far not review in a Single Action Army Revolver so not only will I be showing you this one up close, but I will be doing a followup Field Test Shooting video for it shortly.

Here are some basic specifications on these three Airguns:

View fullsize

Umarex WWII Limited Edition M712 Full Auto Blowback BB Pistol

Type: BB Pistol
Manufacturer: Umarex
Model: WWII Limited Edition M712
Materials: Full Metal
Weight: 1424 grams (3.15 pounds)
Barrel: Smoothbore
Power Source: CO2
Action: Semi and Full Auto
Ammo Type: 4.5mm BBs
Ammo Capacity: 18 Rounds
FPS: 360

• Buy the Umarex WWII Limited Edition M712 BB Pistol in Canada

• Buy the Umarex WWII Limited Edition M712 BB Pistol in the US

View fullsize

Umarex WWII Limited Edition P08 CO2 Blowback BB Pistol

Type: BB Pistol
Manufacturer: Umarex
Model: WWII P08
Materials: Full Metal
Weight: 808 grams (1.7 pounds)
Barrel: Smoothbore
Power Source: CO2
Action: Semi and Full Auto
Ammo Type: 4.5mm BBs
Ammo Capacity: 21 Rounds
FPS: 300

• Buy the Umarex WWII Limited Edition P08 Blowback BB Pistol in Canada

• Buy the Umarex WWII Limited Edition P08 Blowback BB Pistol in the US

View fullsize

Umarex Legends Wildcard Airsoft Revolver

Type: Airsoft Pistol
Manufacturer: Umarex
Model: WildCard .45
Materials: Full Metal
Weight: 454 grams (16 oz)
Barrel: Smoothbore
Power Source: CO2
Action: Revolver
Ammo Type: 6mm Airsoft BBs
Ammo Capacity: 6 Rounds
FPS: 325+

• Buy the Umarex Legends Wildcard Airsoft Revolver in Canada

• Buy the Umarex Legends Wildcard Airsoft Revolver in the US

View fullsize

Make sure to watch my Preview Vimeo Video for the KWA Ronin TK.45 Tekken AEG 2.5 & 3 Airsoft Rifles where I go over some of the specifications and also end off the video with my SHOT Show KWA Interview where Johnathan shows us around the KWA Ronin TK.45 Tekken AEG 2.5 & 3 Airsoft Rifles.

In this Field Test Shooting Review I test both the KWA Ronin TK.45 Tekken AEG 2.5 & 3 Airsoft Rifles out putting some rounds through my Chronograph to see what the actual fps is. I also put some rounds down range to see how the accuracy is for both of these KWA AEG Airsoft Rifles is.

View fullsize

Starting with my Chronograph test, I was using heavier than normal .32 gram Airsoft BB’s to see if this would help out a bit with the accuracy but keep in mind it will slow the fps down a bit compared to using standard .20 gram Airsoft BB’s. My results for both AIrsoft guns where pretty close with the KWA Ronin TK.45 Tekken AEG 2.5 Airsoft Rifle shooting slightly faster at around 324 fps versus the KWA Ronin TK.45 Tekken AEG 3 Airsoft Rifle coming in with a velocity of 314 fps. The KWA Ronin TK.45 Tekken AEG 2.5 Airsoft Rifle can be adjusted for 320-380 fps by accessing a screw situated at the end of the buffer tube. The KWA Ronin TK.45 Tekken AEG 3 Airsoft Rifle does not have this feature since it has its recoil system setup inside the buffer tube. You can swap out springs if you want to adjust your fps on the TK.45 3 Airsoft Rifle.

View fullsize

Moving on to the accuracy test. I know 30 feet is not really a great range for testing out an AEG Airsoft rifle but it does give us an idea of how tight it will shoot at this range and then all we need to do is expand that a bit as we get further out. But a tight group at 30 feet should mean a decent group even when shooting further away.

I do have to say I was having some difficulty with the KWA Ronin TK.45 Tekken AEG 3 Airsoft Rifle using the same ammo in both guns so this should not be a problem if it works well in one but not the other? That said I was getting misfeeds followed by double shots using the .32 gram Airsoft BB’s in the TK.45 3 Airsoft Rifle. Even in full auto it seemed to misfeeds for a bit but then cleared up at the end. Maybe a different ammo choice or some break in time is required? That said both Airsoft guns seemed to shoot low so perhaps a hop-up adjustment is in order. The KWA Ronin TK.45 Tekken AEG 2.5 Airsoft Rifle seemed to shoot the lowest even requiring me to retest it since my first go around shot below the range of the camera. When I sighted in at the top of the target the second time I did get a very tight 1 inch grouping just below the bullseye. In full auto both guns punched nice 2-3 inch holes through the paper targets.

View fullsize

Other than the strange miss feeding issue I had with the KWA Ronin TK.45 Tekken AEG 3 Airsoft Rifle, I found them to be very nice rifles. The simulated blowback recoil action felt nice on the shoulder so personally I would go for the KWA Ronin TK.45 Tekken AEG 3 Airsoft Rifle, I would just need to workout the miss feeding issue for sure. Maybe even a shorter version of the KWA Ronin TK.45 Tekken AEG 3.0 Airsoft Rifle would be nice? You can purchase one of these KWA Airsoft Rifles over in our Canada Replica Airguns store!

• Buy the KWA Ronin TK.45 Tekken 2.5 AEG Airsoft Rifle in Canada

• Buy the KWA Ronin TK.45 Tekken 3 AEG Airsoft Rifle in Canada

We recently updated our Canada Replica Airguns Online Store and made some visual and navigation changes to help our customers find products they are looking for a little bit easier. We will also be rolling this new look and design over to the US Replica Airguns Online Store shortly but for now you can see the before and after by swathing between Canada and US Stores.

Watch my Replica Airguns Online Store Update and New Look Video to see some of the new changes!