Type: Air Pistol. Manufacturer: Sig Sauer ASP Model:Sig Sauer P365. Materials: Metal and polymer build. Weight: .8 pounds (363 Grams). Barrel: 3.2 inches - smooth bore. Propulsion: 12 gram CO2. Action: Blowback singe action only. Ammunition Type: 4.5mm steel BB’s. Ammunition Capacity: 12 round full size drop out magazine. Max FPS: 295.
Trigger Pull: The trigger on the Sig Sauer P365 CO2 Blowback BB Pistol is a single action only trigger so you will need to rack the slide to cock the trigger and internal striker, after which the blowback operation will do this for you. When the Sig Sauer P365 CO2 Blowback BB Pistol is unloaded the trigger pull length is short and the trigger weight is fairly light. That said when you load the full size drop out magazine with steel 4.5mm BB’s, the trigger pull weight increases significantly. This is because the inner barrel comes back and into the magazine when the trigger is pulled allowing for a better seal between the barrel and magazine which increases power and CO2 efficiency. The drawback to this is more friction on the trigger when you pull it with a loaded magazine.
Accuracy: Since I have not done my Field Test Shooting Review for the Sig Sauer P365 CO2 Blowback BB Pistol, I can not comment fully on how the Sig Sauer P365 CO2 Blowback BB Pistol will perform in terms of accuracy and power. I did have the chance to shoot off a couple magazines worth of ammo in the yard shooting at some pop cans around 30 feet away and the Sig Sauer P365 CO2 Blowback BB Pistol seemed to hit them most often then not. I was a bit surprised by the snappy blowback and loud pop the Sig Sauer P365 CO2 Blowback BB Pistol made and will not be surprised if it is able to hit the claimed 295 fps velocity using a brand new CO2.
Build Quality: The Sig Sauer P365 CO2 Blowback BB Pistol has a metal and plastic (polymer) build, the slide is metal along with part of the full size magazine and I am sure several inner parts will also be metal. The frame along with section of the magazine are plastic. It’s kind of hard to tell if the trigger, safeties, slide catch and take down leavers are metal but I believe they are with the magazine release being plastic. The Sig Sauer P365 CO2 Blowback BB Pistol is not the heaviest Airgun coming in at about .8 pounds but for its size it feels good. Fit and finishes are also good.
Realism: The Sig Sauer P365 CO2 Blowback BB Pistol is a replica of the real steel Sig Sauer P365 which is a 9mm striker fired everyday cary compact pistol. It looks and feels the part with most external mechanical working parts mimicking the real steel version well enough. I was not able to easily field strip the Sig Sauer P365 CO2 Blowback BB Pistol since the takedown leaver seems to be only for show. One main difference between the CO2 Airgun and Real Steel version of the Sig Sauer P365 is the use of polymer in the frame for the Airgun version while the real steel Sig Sauer P365 has a metal frame. I imagine this is because 9mm rounds pack some punch and a small polymer frame may not have been up to the job. not something to be concerned with in a CO2 version of the same pistol.
One of the smallest CO2 BB Airgun on the market and somehow Sig managed to get a full size drop out magazine in it?
Good overall replica of the real steel P365 Sig Sauer pistol in terms of looks and operation.
Full Sig Sauer markings and licensing.
Working ambidextrous safeties and slide catch release (locks back after last shot).
Snappy blowback feel.
White and green dot sights front and back.
Rail for accessories (Maybe).
Recessed barrel opening and open ejection port for added realism.
Warning instructions are super discreet!
Cons:
SAO trigger gets a bit harder to pull when loaded up with BB’s.
Has a polymer frame as compared to the metal frame on the real steel version.
Not easily field strippable..
Comments: The Sig Sauer P365 CO2 Blowback BB Pistol was a real show stopper at this years SHOT Show, I was amazed that Sig Sauer was able to actually figure out a way to fit a full size drop out magazine that holds both the CO2 and 12 steel BB’s in such a compact Airgun. The Sig Sauer P365 CO2 Blowback BB Pistol is even small than the Walther PPK in many ways so great work by Sig in figuring out how to engineer their new Sig Sauer P365 CO2 Blowback BB Pistol. I also think the the Sig Sauer P365 CO2 Blowback BB Pistol is a great replica of the real steel version in looks, feel and function which is what we are all looking for when considering buying a new CO2 replica Air Pistol. My initial test shots went well and make me feel optimistic about how the Field Test Shooting Video will go when I make it shortly.
My Table Top Review of the Sig Sauer P365 CO2 Blowback BB Pistol:
The question comes up often about which Airgun to buy. Customers are wondering when they are looking at a specific Airgun and they see several similar products but from different companies, are they the same gun and if so which one should they decide to buy?
One of the biggest Airgun suppliers out there is for sure KWC, their BB and Airsoft guns are redistributed through companies like Umarex, Crosman, Sig Sauer, ASG, Gletcher and more. Often times the companies that redistribute KWC Airguns hold licensing agreements with real gun manufacturers like Smith & Wesson, Glock, Colt, Beretta, Sig Sauer, Taurus to name a few… KWC makes the Airguns in their Taiwanese factory but they are not allowed to put a real gun manufacturer license on the Airguns they distribute directly so KWC distributed Airguns will generally be all black.
I have also seen companies like Umarex distribute a new KWC Airgun that I have not seen yet from KWC, I believe KWC works with these big name Airgun companies directly and will build a new gun or variation of an existing KWC Airgun for them and give that Company an exclusive for a period of time. KWC will eventually regain the rights to sell that Airgun model directly after 6 months to a year.
Now that you know a little bit more on how it all works let’s get back to whether you should buy a KWC branded Airgun or other Brands same Airgun. It really comes down to I would say three factors. Do you want a Licensed version of the Airgun you are buying? Is there a price difference? Which gun is available to buy when I am ready to buy?
When you buy the Licensed version of the KWC Airgun redistributed through a third part Airgun Company you will often get a lot more writing on the Airgun than just the Gun Manufacturers name. Warning information comes to mind and does not look all that attractive on the slide where it is usually found in bright white lettering. If you like a cleaner look and don’t mind the lack of licensing then the KWC distributed version will generally be all back, nice and clean looking.
You would think buying the KWC Version that is sold more directly to the end customer would be the less expensive of the options because less hands are involved in the selling process. This is not always true, it is more about supply and demand, if more people want the cleaner looking KWC version but it’s harder to get ahold of than the price of the KWC version may actually be higher than say the Umarex or Crosman version. So shop around if price is the deciding factor as the guns are going to be mechanically the same with just some slight cosmetic differences between them.
Lastly, availability maybe what eventually leads you to buy a KWC version over an Umarex, or Crosman or Sig version since if the gun is not in stock well you may have limited options and so the one in stock is going to be perhaps your only option! Don’t feel like you got short changed, again these guns are virtually all the same at the end of the day no matter if you buy it from KWC, Umarex, Crosman, Sig Sauer, ASG, Gletcher or whomever.
Type: Gas Blowback Airsoft Pistol. Manufacturer: G&G Model: GTP9 Materials: Polymer slide & frame. Weight: 1.5 pounds (680 grams). Length: 8.85 inches (22.5 cm) total Barrel: 4.4 inches (11.2 cm),Metal non-rifled smooth bore. Propulsion: Green gas or propane. Action: Blowback, single action only. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 23 rounds. FPS: 350-400 fps.
Trigger Pull: The single action only trigger pull on the G&G GTP9 GBB Airsoft Pistol is light with just a little bit of take-up. Since there is a built in trigger safety you will need to make sure your finger is firmly on the trigger or you may notice the trigger safety binding a little bit. Other than that the trigger pull is smooth.
Accuracy: I have not done my actual Field Test Shooting video review for the G&G GTP9 GBB Airsoft Pistol but I did get the chance to shot it quickly in my Sea Can indoor shooting range. Blowback felt pretty decent considering the slide is polymer and I was able to get most of my shots on or near the bullseye from about 25 feet out free standing. I did really like the more open sight setup as it allowed me to see over and under my target giving me a bigger picture of what I am lined up with.
Build Quality: Like pretty much all G&G Airsoft guns, the G&G GTP9 GBB Airsoft Pistol build quality is very high quality all around. Fit and finish where excellent and even though the slide is polymer the G&G GTP9 GBB Airsoft Pistol felt solid in the hadn't and had a decent overall weigth to it. I know plastic slides are not always everyones first choice but the slide on the G&G GTP9 GBB Airsoft Pistol did have good weight to it allowing for decent blowback feel and in many cases plastic will be more durable than pot metal or zinc metal slides and stand up to abuse and wear and tear better.
Realism: The G&G GTP9 GBB Airsoft Pistolis not a replica of any specific real steel gun in production but it is designed to look like your common modern pistol and it seems many of these modern pistols have some Glock like tributes, that square shaped slide, square trigger guard and shallow thumb rest. That all said the G&G GTP9 GBB Airsoft Pistol has all of the right stuff we look for in a replica pistol like a full size drop out metal magazine, full blowback operation and of course the ability to field strip the gun juts for fun or for occasional cleaning.
Most external parts on gun are polymer so you will not get finish wear or noticeable scratches on it. Also keeps the weight down.
Threaded barrel for adding a mock suppressor.
Comes with two different sized Grip Back-straps to accommodate small and larger hands.
Expect to get decent amount of shots per gas fill (around 3-4 magazines).
Adjustable Hop-up that is super easy to access with no gun disassembly required.
Micro Gas Filter and Whirl Cylinder Valve help to manage gas efficiency.
Full Size Dropout metal magazine pretty standard on Airsoft pistols these days.
Rail for accessories if you choose.
Open white dot sights make it super easy to see your target.
Dual safety system, cross bolt on frame and trigger safety.
Narrow and light, would make a great lightweight side arm for Airsoft battles.
Cons:
Some people may not like the polymer slide?
Sights is non adjustable but mine got bullseyes from 25 out.
Comments:
Normally I am not a big fan of all plastic or polymer guns but in the case of the G&G GTP9 GBB Airsoft Pistol I think it makes sense, G&G has done a great job of making the plastic slide feel solid and have good overall weigth to it so you still get that weighty feeling int he hand and enough blowback to feel the recoil with each shot. I also think the G&G GTP9 GBB Airsoft Pistol will be more durable long term and look better even if it gets knocked around since you won’t see the scratches and dings that you would see on a metal gun. The G&G GTP9 GBB Airsoft Pistol also has a ton of stuff going on that I have not seen on other guns to date like the open rear sights for better sight framing and that super cool easy to access hop-up adjustment system.
My Table Top Review of the G&G GTP9 GBB Airsoft Pistol:
In this Update Video we take a look at some BB and Airsoft pistols I have already reviewed but in a slightly different form factor. They are all Umarex Legends pistols but two of them (The P.08 and M712) are WWII Special Editions versions with that aged weathered look to them.
The Umarex Single Action Army Wildcard .45 is in 6mm Airsoft which I have so far not review in a Single Action Army Revolver so not only will I be showing you this one up close, but I will be doing a followup Field Test Shooting video for it shortly.
Here are some basic specifications on these three Airguns:
Umarex WWII Limited Edition M712 Full Auto Blowback BB Pistol
Type:BB Pistol Manufacturer:Umarex Model:WWII Limited Edition M712 Materials: Full Metal Weight: 1424 grams (3.15 pounds) Barrel: Smoothbore Power Source: CO2 Action: Semi and Full Auto Ammo Type: 4.5mm BBs Ammo Capacity: 18 Rounds FPS: 360
Umarex WWII Limited Edition P08 CO2 Blowback BB Pistol
Type:BB Pistol Manufacturer:Umarex Model:WWII P08 Materials: Full Metal Weight: 808 grams (1.7 pounds) Barrel: Smoothbore Power Source: CO2 Action: Semi and Full Auto Ammo Type: 4.5mm BBs Ammo Capacity: 21 Rounds FPS: 300
In this Field Test Shooting Review I test both the KWA Ronin TK.45 Tekken AEG 2.5 & 3 Airsoft Rifles out putting some rounds through my Chronograph to see what the actual fps is. I also put some rounds down range to see how the accuracy is for both of these KWA AEG Airsoft Rifles is.
Starting with my Chronograph test, I was using heavier than normal .32 gram Airsoft BB’s to see if this would help out a bit with the accuracy but keep in mind it will slow the fps down a bit compared to using standard .20 gram Airsoft BB’s. My results for both AIrsoft guns where pretty close with the KWA Ronin TK.45 Tekken AEG 2.5 Airsoft Rifle shooting slightly faster at around 324 fps versus the KWA Ronin TK.45 Tekken AEG 3 Airsoft Rifle coming in with a velocity of 314 fps. The KWA Ronin TK.45 Tekken AEG 2.5 Airsoft Rifle can be adjusted for 320-380 fps by accessing a screw situated at the end of the buffer tube. The KWA Ronin TK.45 Tekken AEG 3 Airsoft Rifle does not have this feature since it has its recoil system setup inside the buffer tube. You can swap out springs if you want to adjust your fps on the TK.45 3 Airsoft Rifle.
Moving on to the accuracy test. I know 30 feet is not really a great range for testing out an AEG Airsoft rifle but it does give us an idea of how tight it will shoot at this range and then all we need to do is expand that a bit as we get further out. But a tight group at 30 feet should mean a decent group even when shooting further away.
I do have to say I was having some difficulty with the KWA Ronin TK.45 Tekken AEG 3 Airsoft Rifle using the same ammo in both guns so this should not be a problem if it works well in one but not the other? That said I was getting misfeeds followed by double shots using the .32 gram Airsoft BB’s in the TK.45 3 Airsoft Rifle. Even in full auto it seemed to misfeeds for a bit but then cleared up at the end. Maybe a different ammo choice or some break in time is required? That said both Airsoft guns seemed to shoot low so perhaps a hop-up adjustment is in order. The KWA Ronin TK.45 Tekken AEG 2.5 Airsoft Rifle seemed to shoot the lowest even requiring me to retest it since my first go around shot below the range of the camera. When I sighted in at the top of the target the second time I did get a very tight 1 inch grouping just below the bullseye. In full auto both guns punched nice 2-3 inch holes through the paper targets.
Other than the strange miss feeding issue I had with the KWA Ronin TK.45 Tekken AEG 3 Airsoft Rifle, I found them to be very nice rifles. The simulated blowback recoil action felt nice on the shoulder so personally I would go for the KWA Ronin TK.45 Tekken AEG 3 Airsoft Rifle, I would just need to workout the miss feeding issue for sure. Maybe even a shorter version of the KWA Ronin TK.45 Tekken AEG 3.0 Airsoft Rifle would be nice? You can purchase one of these KWA Airsoft Rifles over in our Canada Replica Airguns store!
Type: BB Machine Gun/Rifle. Manufacturer: Umarex USA. Model: Steel Strike (AR Platform). Materials: Plastic shell with internal metal parts. Weight: 3.8 pounds (1720 grams). Barrel: 9 inch Metal non-rifled. Propulsion: CO2 x 2 (housed in b uffer tube) Action: Semi and 6 round burst blowback, single action only. Ammunition Type: 4.5mm BB's. Ammunition Capacity: 900/30 round drop out hopper/magazine. FPS: 400.
Trigger Pull: The trigger pull on the Umarex Steel Strike CO2 BB Rifle is single action only, so you will need to charge the rifle by pulling back the charging handle first, once this is done the trigger is reset and the gun is ready to shoot. The blowback operation charges the internal bolt automatically after each shot so keep this in mind as the gun is going to be live and ready to shoot until you either run out of ammo or CO2. Make sure to place it in safe mode when not in use especially when you have CO2 in the gun.
Accuracy: I have not shot the Umarex Steel Strike CO2 BB Rifle yet but will remaking a Field test Shoting video very soon for it. But for a reference I did shoot the Umarex Steel Froce which is a very similar product and this is how it performed for me:
Shooting the Umarex Steel Force at a target from 30 feet away in a semi rested position using both the semi auto and 6 round burst modes, the Steel Force performed very good getting around a 1.5 inch 10 shot grouping in semi auto and then spreading out a bit in 6 round burst mode which was to be expected, still a respectable grouping. Shots where well centered on the target but I did have the advantage of using a red dot scope, I found when using the none adjustable open sights that come with the Umarex Steel Force that I was shooting under the target at closer ranges. My Chrony testing did not go exactly as planned due to my temperamental Chronograph but I was able to get two shots to read and they average out at 466 fps, well over the 430 claimed fps.
Build Quality: The Umarex Steel Strike CO2 BB Rifle is mostly plastic on the outside with most of it's metal parts on the inside, pretty much everything you can see on the outside is going to be plastic except for maybe the magazine release and selector switch. The plastic seems durable enough but it has just a bit too much shine for me which I think makes it look less like metal and more like plastic. Everything seemed to function as expected but again I would have liked to have seen a bit more metal, not necessarily the outer shell, but I feel the flash hider, trigger, flip up sights and charging handle could have been made out of metal and would have given this Umarex Umarex Steel Strike CO2 BB Rifle a bit more weight and balance to it.
Realism: The Umarex Steel Strike CO2 BB Rifle is designed on the AR platform and for the most part is about the right size shape and look of an AR 15 / M16 type rifle. Even the selector switch, magazine release, rear adjustable stock and Charging handle function just like a real AR 15! Some parts are molded in just for looks like the bolt release, dust cover and forward assist but at least they look the part. The plastic for me was the real tell here as it kind of looks like plastic where as some plastic guns are really hard to tell they are not metal, but other than that this is a pretty decent replica of an AR Rifle.
Will get a decent amount of shots with its dual CO2 configuration.
Removable and 2 position adjustable stock.
Flip up sights with optical sight top rail option.
Lots of rials for adding on accessories.
Not a bad replica of an AR platform gun.
Full auto has a very high rate of fire.
Internal blowback does give a bit of recoil feedback feel.
CO2 in the buffer tube makes more sense?
Price point is good for a fun full auto BB rifle.
Cons:
Pop up sights are non adjustable.
Plastic finish could have been a bit higher grade, like what most Airsoft AR's use.
Just a bit more metal would have been nice and added to the overall weight a bit. (Switches, Sights, Charging handle.
No sling mounts.
Comments:
The Umarex Steel Strike CO2 BB Rifle looks to be an improvement over the Steel Storm and Steel Force, I like the new placement of the duel CO2 into the buffer tube and changing the location of the BB’s from the upper receiver and into the drop out magazine which is where we would normally expect them to be. We also get a magazine hopper capacity of up to 900 rounds with the new Umarex Steel Strike CO2 BB Rifle so no having to refile int for several CO2 swap-outs. I think the overall looks ahed improved and the tighter aperture of the pep sight shoudl make getting BB;s on target with more accuracy a bit easier. I look forward to seeing what kind of performance I get out of the Umarex Steel Strike CO2 BB Rifle when I test it out during my upcoming Field Test Shooting Video.
My Vimeo Table Top Videos for the Umarex Steel Striker BB Rifle:
This is going to be the only video this week. I’m turning 50 on Friday April 5th and had a goal that I wanted to complete before I reached 50. I wanted to get my 1993 Ducati 750 Super Sport all fixed up and ready to go, and it’s been a lot of work cleaning, fixing, painting… Perhaps it’s a bit of a mid life crisis sort of thing but at least it’s gotten my but in gear :) Stay tuned till the end of the video for some video of what the mighty Ducati looks like today if you’re into that sort of thing!
Getting back to the KWA Ronin TK.45 Tekken AEG 2.5 & AEG 3 Airsoft Rifles. You may remember my Shot Show Interview with Jonathan, well he went front to back and up and down the entire KWA product line ending with the KWA Ronin TK.45 Tekken AEG 2.5 & AEG 3 Airsoft Rifles and boy does he know his stuff, I will be adding the portion of Jonathan’s interview that deals with these rifles at the end of this video also.
Here is some info on the KWA Ronin TK.45 Tekken AEG 2.5 & AEG 3 Airsoft Rifles…
Trigger Pull: The trigger pull on the Umarex Beretta APX CO2 Blowback Airsoft Pistol is a little different then that of the real steel APX. On the real steel APX there is actually a trigger safety and the actual gun uses a striker based system with a fairly short reset and take-up. On the Umarex Replica Airsoft version the trigger does not have a built in safety and the reset and take-up are much longer (full length). I have read that both the real steal and Airsoft versions of the APX both have about 6 pounds trigger pulls but I personally felt like the Airsoft version was heavier than that, perhaps because of the long pull. Overall the Umarex Beretta APX CO2 Blowback Airsoft Pistol trigger is acceptable but not my favorite.
Build Quality: Very good, the Umarex Beretta APX CO2 Blowback Airsoft Pistol feels heavier than 1.5 pounds in the hand, perhaps because it is a more compact gun. The metal slide, metal stick mag and internal metal parts all help to balance off the polymer frame nicely. Fit and finish is also good.
Realism: The Umarex Beretta APX CO2 Blowback Airsoft Pistol overall is a really close replica to the real steel APX other than the added safety and missing trigger safety. The added safety does not stand out too much and does serve a purpose while the missing trigger safety could of at least been there for show if not an actual working safety. Other than that the Umarex Beretta APX CO2 Blowback Airsoft Pistol is very close to the Beretta APX with its full licensing, open ejection port, recessed barrel working slide catch release and blowback operation. Available at the:Replica Airguns Store
Pros:
Good weight and feel to it, build quality seems good overall.
Really nice replica of the original Beretta APX in most ways.
Working slide catch and release. Will also lock back on last shot.
Fully Beretta licensed through umarex.
Easy to see white dot sights front and back.
Recessed barrel and open ejection port for added realism.
Accessory rail for adding a laser or tactical light.
Stick magazine but plate gives the elusion of a full size magazine.
Warning instruction are nice and discreet!
Comes with two magazines and an additional back strap grip in a different color.
Cons:
Trigger is a bit long and perhaps heavier than the real steel APX trigger. It also does not have the trigger safety.
Has a stick magazine rather than a full size magazine.
Comes with orange tip but can be removed with some work.
Comments:
I like that the Airsoft version of the Beretta APX now comes in a box and also includes not only an extra magazine but also an included grip back strap in an alternate color for those that want a bit of customization. The Umarex Beretta APX CO2 Blowback Airsoft Pistol feels good in the hand and even thought the trigger is a bit long you can still get off some pretty quick shots since the trigger pull is not too tough. The Umarex Beretta APX CO2 Blowback Airsoft Pistol makes a fairly economical option for your sidearm in Airsoft battles and if you want more than two magazines than additional magazines are not that expensive and will not weigh you down on the field.
My YouTube Videos for the Umarex Beretta APX CO2 Blowback Airsoft Pistol:
Type: Blowback GBB Airsoft Pistol. Manufacturer: Distributed by Umarex. Model:Glock 17 Gen 4. Materials: Metal & Polymer. Weight: 1.45 pounds (658 grams). Barrel: 3.75 inches metal non-rifled. Propulsion: Green Gas or Propane. Action: Semi auto blowback, single action only trigger. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 20 round drop out full size metal magazine. FPS: Claimed 300+.
Trigger Pull: The trigger pull on the Umarex Glock 17 4th Gen GBB Airsoft Pistol is fairly short with only a little bit of take up, the release is light and crips. The blowback action resets the internal Hammer / Striker with each shot for that true single action trigger and it’s also nice that the trigger does have a working trigger safety.
Accuracy: At this point I have not shot the Umarex Glock 17 4th Gen GBB Airsoft Pistol so I can only quote what Umarex is saying in terms of FP2 which is around 300 using Green Ga or Propane. This is fine for playing Airsoft games but for Canada import it can get a bit sticky. Luckily we where able to get a bunch into Canada so hopefully we can get some more in our Canada Replica Airguns Store in the future… US supply will be less of a problem.
Build Quality: TheUmarex Glock 17 4th Gen GBB Airsoft Pistol seems well made overall. It does seem a little bit underweight but still feels solid enough in the hand. The Slide is metal but has a bit of an unusual finish that makes it look a lot like the plastic frame rather than a more shiny metal look. All the parts seem to fit nicely, maybe even a bit snug at first as I noticed the side had a bit of friction to it but seems to be working in nicely now.
Realism: The Umarex Glock 17 4th Gen GBB Airsoft Pistol looks the part of a Glock 17 4th Generation all day long. Other then the slightly lighter weight it would be hard to tell off hand until you remove the magazine and take a closer look. All the parts work as you would expect them to, similar to the real steel version and you can even fully field strip the Umarex Glock 17 4th Gen GBB Airsoft Pistol which makes getting to and adjusting the hop-up easy enough to do. Available From: The Replica Airguns Store.
Pros:
Decent weight and feel to it, build quality seems good.
Really nice looking replica of the original Glock 17 Gen 4.
Fully Glock licensed.
Easy to see white dot sights front and back.
Recessed barrel for added realism.
Accessory rail for adding a laser or tactical light.
Full size drop out metal magazine that holds the CO2 and 20 6mm Airsoft BB’s.
Warning instruction are nice and discreet under trigger guard
Nice light SAO trigger as the blowback pre-cocks the internal hammer/strike.
Working trigger safety.
Cons:
May or may not come with an orange tip but can be fairly remissly removed.
Sight are non-adjustable which is common with low cost airguns like this one.
FPS is a bit low making Canada import difficult.
Comments:
Getting the Umarex BB versions of the Glock 17 and Glock 19 has for sure been a bit easier since fps velocity is not a factor. So it was great that we where able to import at least some of these Umarex Glock 17 4th Gen GBB Airsoft Pistols into Canada. I hope we will be able to continue supplying the Glock Airsoft versions in our Canada Replica Airguns Store but I can not promise anything… So if you see some in stock then grab one while you still can!
Type: Blowback CO2 BB Pistol. Manufacturer: Distributed by Umarex. Model:Glock 17 Gen 3. Materials: Metal & Polymer. Weight: 1.6 pounds (726 grams). Barrel: 4 inches metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, double action only trigger. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 18 round drop out full size metal magazine. FPS: Claimed 365.
Trigger Pull: The trigger pull on the Umarex Glock 17 Gen 3 CO2 Blowback BB Pistol is in a way a single action trigger since the blowback action pre-cocks the internal hammer allowing for a much lighter single action type trigger pull. I call it a a double action trigger mainly because there is an indexing of a BB from the magazine into the breach area every time you pull the trigger which means the take up is long and there is a little bit of friction from the mechanical mechanism that indexes a BB.
Accuracy: At this point I have not shot the Umarex Glock 17 Gen 3 CO2 Blowback BB Pistol so I can only quote what Umarex is saying in terms of FP2 which is 365. That's sounds reasonable based on other similar guns like this that have that parcial blowback action and BB indexing system to allow for a more sealed system. We will find out when I perform my Field Test Shooting video for the Umarex Glock 17 Gen 3 CO2 Blowback BB Pistol shortly.
Build Quality: TheUmarex Glock 17 Gen 3 CO2 Blowback BB Pistol seems well made overall, Fit and finish are nice and slide wiggle is minimal. There is a bit of a clanky sound when the slide cycles but since pretty much all of these types of airguns are made out of pot metal with a high con ten of zinc alloy this is kind of expected.
Realism: The Umarex Glock 17 Gen 3 CO2 Blowback BB Pistol absolutely looks the part of a Glock 17 3rd Generation, sitting on the table and even holding it in your hand you are going to think it's the real deal until of course you drop the magazine and see that it is a Co2 mag. Mostly everything operates like a real Glock 17 but the slide is not a full blowback meaning it only goes back about 3/4 as much as a real Glock 17 slide would. One other noticeable difference is the ability to quickly field strip the Umarex Glock 17 Gen 3 CO2 Blowback BB Pistol, you will need to remove a pin since the take down tabs are non functioning and moulded into the frame. Available From: The Replica Airguns Store.
Pros:
Great weight and feel to it, build quality seems good.
Really nice looking replica of the original Glock 17 Gen 3.
Fully Glock licensed.
Easy to see white dot sights front and back.
Recessed barrel for added realism.
Accessory rail for adding a laser or tactical light.
Full size drop out metal magazine that holds the CO2 and 18 4.5mm steel BB’s.
Safety built into the serial number plate area keeps it well hidden.
Warning instruction are nice and discreet under trigger guard
Not bad feeling double action only trigger as the blowback pre-cocks the internal hammer/strike.
365 fps is decent for a blowback BB gun.
Cons:
Does have blowback action but not full blowback.
Slide sound is a bit clanky.
Sight are non-adjustable which is common with low cost airguns like this one.
Would have liked to have seen more pristine packaging from Glock.
Comments:
Since there release of the Umarex Glock 17 Gen 3 CO2 Blowback BB Pistol we have all been waiting for a blowback version and now we have it in the Umarex Glock 17 Gen 3 CO2 Blowback BB Pistol! Defiantly another step in the right direction when it comes to a Licensed Glock. Am I looking forward to the Glock 17 Gen 4 Blowback BB Pistol, sure but if you’re a Glock fan why not have them all and this version will get you a bit higher fps and more shots per CO2 while still offering blowback action with a decent trigger!
In this Vimeo Preview Video I show off three new Glock and Glock-like Air Pistols. Two of them are from Umarex and are Glock Licensed, one being a GGB Airsoft Pistol and the other is a CO2 Blowback BB Pistol. I also show an unlicensed Glock-like CO2 Blowback BB Pistol from KWC that kind of looks like a glock but has several key differences that do make it deviate a fair amount from that of a true Glock pistol.
Starting with the KWC 17. At first glance you may think it looks a lot like a Glock but on closer inspection it has the following differences: Notched out trigger guard, extended thumb guard or beaver tail, straight pistol grip with no finger indents, cut out on slide, slide serration on front. The KWC 17 CO2 Blowback BB Pistol is a full blowback Airgun with a full size drop out metal magazine that holds the CO2 and 17 rods of 4.5mm steel BB’s. You can expect to get around 330 fps for it.
Another Blowback CO2 BB Glock is the Umarex Glock 17 Gen 3 CO2 Blowback BB Pistol which is fully Glock licensed and also features a full size drop out metal magazine that hold 18 4.5mm steel BB’s. The Glock 17 Gen 3 CO2 Blowback BB Pistol is a partial blowback Airgun so you can expect a little bit higher velocity of around 365 fps and additional shots per CO2.
Lastly I show you the Umarex Glock 17 Gen 4 GBB Airsoft Pistol, another fully Glock Licensed airgun with full blowback operation and a full size drop out metal magazine that holds 20 6mm plastic Airsfot BB’s and the either Green Gas or Propane Gas. Velocity will be around 300 fps on this one.
Pickup one of these Glock and Glock-like Airguns form either our Canada or US online Replica Airgun stores!
Type: Blank Revolver. Manufacturer: ROHM (RÖHM). Model:RG-89 Materials: Mostly Metal. Weight: 1.45 pounds (658 grams). Barrel: Front firing designed for attaching a flare adaptor. Propulsion: Gun powder. Action: Single & double action. Ammunition Type: 9mm / .380 caliber crimped. Ammunition Capacity: 6 rounds. FPS: N/A.
Trigger Pull: The trigger pull on the ROHM RG-89 .380 Caliber Blank Revolver in single action is fairly light weight with virtually no take up at all as you would expect from a revolver. The double action trigger pull is much heavier with a smooth release. Mechanically the trigger feels really solid.
Accuracy: NA.
Build Quality: The overall build quality for the ROHM RG-89 .380 Caliber Blank Revolver is excellent, being German made its built to last and the fit and finish is typical German quality. There are steel parts where they need to be like in the barrel, pins, screws and reenforcing parts, the rest of the gun is generally made out of a zinc alloy otherwise know as pot metal with only the moulded grips being made out of plastic.
Realism: The ROHM RG-89 .380 Caliber Blank Revolver is not an exact replica of any given gun in production as this would make importing it into Canada even more difficult, but it is styled after a Snub Nosed type Revolver. As for looking like and working like a real gun, the ROHM RG-89 .380 Caliber Blank Revolver looks and sounds as loud as a real gun, of course with the exception of the dangerous bullet coming out of the barrel!
All metal gun with reenforced steel in some areas.
Front firing gun.
Large caliber makes a bigger bang.
Higher 6 shot capacity over RG-59.
Chrome (Silver) finish is very nice.
Also like the moulded grips on the Chrome version.
Comes with Flare Adaptor & Cleaning Rods.
Comes in a nice foam lined plastic hard shell case.
Right now Rohm is the only blank gun brand we can get in Canada.
Cons:
Double Action trigger pull is a bit heavy.
Have to make sure you only shot them where you will not get in trouble. Very loud!
Expensive due to them being harder to get and in high demand in Canada.
Comments: I think the ROHM RG-89 .380 Caliber Blank Revolver especially in the Chrome (Nickel) version is one of the nicest looking ROHM Blank guns we stock. The additional size over say a ROHM RG-59 makes it feel a lot more beefy in the hand, you also get the extra 6th 9mm / .380 caliber blank with the larger cylinder of the ROHM RG-89 .380 Caliber Blank Revolver. Anther bonus with the Chrome or Nickel version is that you get moulded grips that again I feel looks and fells better in the hand. Along with the ROHM RG-88, the ROHM RG-89 .380 Caliber Blank Revolver is one of my Top ROHM Picks!
My Full Video Review for the ROHM RG-89 .380 Caliber Blank Revolver:
In this Evolution of the Sig Sauer ASP Pellet Pistols YouTube Video I show you Sig Sauer’s full lineup of ASP CO2 Blowback Pellet Pistols and talk about how Sig Sauer has consistently improved their ASP Airgun designs to make their ASP Pellet Pistol the new standard for other airgun companies to follow.
Sig Sauer introduced and started shipping their Sig Sauer APS P250 and P226 CO2 Blowback Pellet Pistols in 2015. Both of these Pellet firing Air Pistols used a similar styled double sided rotary magazine as the Umarex PX4 which is common in many blowback pellet Airguns today. The Sig Sauer ASP P226 did include a new lever styled CO2 piercing system that did not require manual tab based tightening of the CO2. Both the Sig Sauer APS P250 and P226 included full Sig Licensing and one to one scale accuracy in a very high quality build.
In 2017 Sig Sauer introduced the Sig Sauer ASP P320 which included their first Belt Fed Rotary Magazine similar to the Belt Fed Rotary Magazines in their ASP Rifle line. The Sig Sauer ASP P320 stick styled belt magazine held a whopping 30 rounds!
In the spring of 2018 Sig started shipping their Sig Sauer ASP X-Five which featured a Belt Fed Rotary Magazine along with Sig’s Lever CO2 Loading System. The Sig Sauer ASP X-Five is also one of the rare action shooting CO2 blowback Airguns with a fully adjustable rear sight.
In the Fall of 2018 Sig brought out their latest ASP CO2 Blowback Pellet Air Pistol, the Sig Sauer ASP M17. The Sig Sauer ASP M17 CO2 Blowback Pellet Pistol nailed everything us Airgun enthusiast are looking for in an Airgun which can be hard to achieve when pellets are involved! The Sig Sauer ASP M17 CO2 Blowback Pellet Pistol not only featured a Belt Fed Rotary Magazine and Lever Style CO2 System but put all of this into a full size drop out magazine. The Sig Sauer ASP M17 CO2 Blowback Pellet Pistol brought even more features we where looking for like a Cut Out Ejection Port, Recessed Barrel Opening and the ability to be Filed Striped for easy access to a removable barrel just incase a pellet managed to get jammed.
So as you can see Sig Sauer is pushing the boundaries of Airgun Designs and always trying to make even better and better products to bring to us each year. I look forward to seeing What Sig Sauer is going to show me this year at SHOT Show 2019!
Type: Air Pistol. Manufacturer: Sig Sauer ASP Model:Sig Sauer ASP M17. Materials: Metal and plastic build. Weight: 2.21 pounds (1002 Grams). Barrel: 4.6 inches - Rifled steel. Propulsion: 12 gram CO2. Action: Blowback double action only. Ammunition Type: .177 caliber pellets. Ammunition Capacity: 20 round belt fed magazine. Max FPS: 430.
Trigger Pull: The trigger pull on the Sig Sauer M17 ASP CO2 Blowback Pellet Pistol is actually very good considering the trigger not only cocks the hammer with each shot but it also has to index the 20 round belt fed magazine. All of this is done only using around 6 pounds of trigger pull. You will find the trigger pull to be a bit long because of this but overall it feels pretty good and will allow for fairly fast rapid fire action shooting.
Accuracy: So far I have not done my official Field Test Shooting Video for the Sig Sauer M17 ASP CO2 Blowback Pellet Pistol but plan on making it shortly. I did hover get a chance to load some CO2 and Sig Sauer Led Pellets into my Sig Sauer M17 ASP CO2 Blowback Pellet Pistol and so far fired two fully loaded magazines which is 40 rounds. So far so good, no misfires or jams and power can accuracy seemed nice and consistent. The blowback action is scrips and snappy!
Build Quality: As with all the Sig Sauer ASP Airguns, the qualify is very good. Sig does not actually make these guns but has full control over the design and manufacturing of them. The actual airguns are made in Japan for Sig Sauer but this OK since Sig is not really an Airgun manufacturer and so levying that part to a company that is is not a bad idea. The fit and finish on the Sig Sauer M17 ASP CO2 Blowback Pellet Pistol is top notch. There is lots of metal in the Sig Sauer M17 ASP CO2 Blowback Pellet Pistol similar to where you would find it in the real steel version.
Realism: The Sig Sauer M17 ASP CO2 Blowback Pellet Pistol is a very close replica of the real steel Sig Sauer M17. Even the slight difference in color between the slide and frame has been recreated on the Airgun version as compared to the real steel Military version. Sig has made this new ASP Airgun even more realistic by giving it an open ejection port, a recessed barrel, a full size drop out magazine that holds the CO2 and belt magazine, and Sig even made the M17 ASP field strippable!
Very good overall replica of the real steel Sig Sauer M17.
Designed by Sig and made in Japan, fully Sig Sauer licensed.
Has nice heavy blowback operation.
Has accurate weight to it at just over 2 pounds, will be similar to a loaded real steel M17.
White dot sights and accessory rail.
High capacity 20 round belt feed magazine that fits into the full size drop out magazine.
Easy loading CO2 with Sigs lever system, CO2 also combined with the full size drop out magazine.
Decent feel to the trigger not heavy or as sticky even though the trigger action rotates the 20 round belt fed magazine.
First Sig Sauer ASP pistol that is Field Strippable.
Open ejection port and reassessed barrel that help with believability.
Cons:
Slide does not lock back after last shot.
Sights are non adjustable.
Only magazine option is the longer high capacity magazine that does extend the pistol grip.
Comments: I really like what Sig Sauer is doing for airgun community. What I mean by this is that rather than simply slapping their License on an already existing airgun like many other companies tend to do, Sig instead has decided to create something new and fresh. Sig Sauer has in brought new advancements and deigns to their APS Airgun line that nobody els so far has been able to do and with each new ASP Airgun Sig Sauer has improved upon their designs always staving to be better than the previous version. That’s exactly what the Sig Sauer M17 ASP CO2 Blowback Pellet Pistol is to me, Sigs best ASP Air Pistol to date!
My Table Top Review of the Sig Sauer M17 ASP CO2 Blowback Pellet Pistol:
Here we go again with another Favorite Airgun Video of 2018, this time I show you my Air Rifle Favorites! There are usually a lot less Air Rifles that come out than Air Pistols but this year was’t too bad for new and interesting Ari Rifles. As per usually there where more 4.5mm Steel BB Rifles and I am sorry to say nothing really came out at least in the Replica Air Rifle department but of course there where 6mm Airsoft rifles too.
I do mainly focus on the 4.5mm BB rifles but throw in the group a very well made and ultra realistic Airsoft Rifle that was for sure in this years Top Five!
Next in this video I take a look at what I can say was my number one pick this year, the Crosman DPMS SBR Steel BB Rifle! When Crosman announced the Crosman DPMS SBR Steel BB Rifle at SHOT Show I was a bit surprised since Crosman is not known best for their Replica Airguns. Not only did Crosman decide to come out with an M4 Replica Air Rifle but they in fact made what I believe is the best one out there at least in 4.5mm Steel BB. It covers all the check boxes I am looking for. It’s very well made, shoots in semi and full auto with a working internal blowback bolt. All the mechanical parts work in the same way as a real M4 including being able to take apart the upper and lower receivers. I really hope Crosman took note of how popular this style of Airgun is and keeps making more product like the Crosman DPMS SBR Steel BB Rifle.
Another 4.5mm Steel BB M4 Replica that came out in 2018 is the Air Venturi HellBoy CO2 BB M4 Air Rifle. The HellBoy may not be as full featured as the Crosman DPMS SBR but it is worthy of this years Top Five. The Air Venturi HellBoy CO2 BB M4 Air Rifle is similar to how the Cybergun AK 47 BB rifles are built, using a magazine design that is basically the bulk of the working mechanism, it hold the CO2, CO2 Valve, BB’s, and even part of the trigger mechanism. The Air Venturi HellBoy CO2 BB M4 Air Rifle may not be as ultra realistic as the Crosman DPMS SBR but it’s an excellent full metal M4 Replica with decent shooting performance.
My only Airsoft contribution to this years list is the KWA LM4 RIS PTR Full Metal GBB Airsoft Rifle. I just love this Airsoft Rifle, It may not be the cheapest M4 GBB Airsoft Rifle out there but it sure is worth it. When you pick it up it just feels like quality and when you shoot it you know it’s quality, the shooting performance is awesome for a GBB Rifle. I barely noticed any cool down even when shooting off the entire magazine in full auto. If you want the most realistic M4 Air Rfile out there than the KWA LM4 RIS PTR Full Metal GBB Airsoft Rifle is going to be the one.
Last up to showcase in this years Favorite Air Rifles is the Umarex Legends MP40 CO2 BB Weathered Submachine Gun. I know the Umarex Legends MP40 CO2 BB Submachine Gun kinda came out last year but I did not get my hands on the Weathered version till only recently so I decided to put it in this years Top Five pick. The Umarex Legends MP40 CO2 BB Submachine Gun is another fine 4.5mm Steel BB Rifle in this case it’s more of a Submachine Gun. The Umarex Legends MP40 CO2 BB Submachine Gun also offers semi and full auto select fire and is a very close replace to the real steel MP40 in almost every way. The Weathered Finish and included Leather Sling really finish it off to make it super believable.
2018 was another great year for Airguns and so I wanted to take a look at some of my favorite Air Pistols from 2018. There where many to choose for and perhaps some of them could just as easily been in my top five list but at some point I have to narrow it down and make a video for you all.
Here they are in no particular order, you may notice that most of them are from Umarex, and no I am not trying to promote Umarex over the other Airgun companies. Umarex simply brought out a lot of new products this year! I will be making a similar Favorite Air Rifle Video for 2018 so we’ll see if some of the other companies get more of a highlight…
First up we have the Umarex HK USP CO2 Blowback BB Pistol which is another full blowback full size drop out metal magazine BB Pistol that is an outstanding replica of the real steel HK USP in not only looks but also in function.
Next is the Umarex Glock 19 CO2 BB Pistol. Now it may seem that the Umarex Glock 19 is a fairly basic BB pistol in that it does not have blowback operation and uses a standard stick magazine. Not always what we are looking for in a replica airgun. What the Umarex Glock 19 CO2 BB Pistol offers that no other airguns has been able to accomplish so far is to bring a Glock approved license to an Airgun. Yes there are other “Glock Replicas” out there but Glock did not approve or license them so these imposters are made without Glock’s golden seal of approval. Counterfeits if you may… This Umarex breakthrough with Glock will allow for many more new Glock licensed Airguns in the future so if you want a full blowback full size mag Glock Airgun then just wait a bit and you will have one.
A nice compact CO2 Blowback BB Pistol that came out this year is the Umarex Walther PPS M2 CO2 Blowback BB Pistol. It’s basically the new version to the Standard Walther PPS. I simply just like the look and size of this Air Pistol and appreciate the engineering that went into such a small compact airgun with limited space for airgun components like a 12 gram CO2 and the CO2 valve mechanism.
One last Umarex product in my top five lineup is the Umarex SA10 CO2 Blowback BB and Pellet Air Pistol. The Umarex SA10 is very different than most other Air Pistols out there. First off it’s a blowback Airguns that shoots both BB’s and Pellets which may not be totally unusual, but it has a very unique full size magazine that stores extra rotary magazines that you can preload for easy and quick reloading. The Umarex SA10 is an all metal Airgun with a heavy construction and during my Field Test Shooting Review it performed rather well especially in the accuracy department.
Last and would you believe not an Umarex product is the Sig Sauer X-Five ASP CO2 Blowback Pellet Pistol. The Sig X-Five Pellet Pistol like the Umarex SA10 is full metal, has blowback operation and shoots Pellets, but the Sig Sauer X-Five ASP has a 20 round belt fed magazine which is something that Sig Sauer has been utilizing in their Pellet Airguns. Sure there are some other companies that have attempted to make Airguns with belt fed magazine but usually these Airguns have very heavy triggers making them almost painful to shoot. I like the fact that Sig Sauer is breaking new ground and trying to bring unique concepts and ideas to the Airgun Market.
In this video I do get in nice and close with the camera so you can see how awesome the Weathered finish and Leather Sling look. Just keep in mind you will pay a bit more of a premium for the Umarex Legends MP 40 Weathered version.
If you haven’t already watched my Table Top Comparison Review for the KWA M226-LE and KJWorks KJ1060 Sig Sauer P226 Airsoft Pistols than make sure to have a look at that video if you’re interested in more of the specifications and details and some closeup shots of both Airsoft Guns.
In this Field Test Shooting Video Review I compare the KWA M226-LE and KJWorks KJ1060 Sig Sauer P226 Airsoft Pistols head to head and side by side to see how these two very similar Sig Sauer P226 Airsoft Replicas perform. They both cost about the same, are built with similar quality and look a lot alike but what I really wanted to know is how do they shoot!
First off I tested out the power of both Airsoft Guns shooting 5 consistent .20 gram Airsoft BB’s from each gun through my Chronograph. Keep in mind I was using a full magazine of propane gas in the KWA M226-LE and a brand new 12 gram CO2 in the KJWorks KJ1060 (KP-01). As CO2 is know to have more power than green gas I was expecting a bit more pop out of the KJWorks KJ1060 which I did get. The temperature in my indoor Sea Can Airgun Shooting Range was 18 degree Celsius (64 degrees Fahrenheit) so not too cold or too hot. The KWA M226-LE averaged right around 320 fps while the KJWorks KJ1060 averaged 350 fps.
Moving on to my accuracy portion of the test for the KWA M226-LE and KJWorks KJ1060 Sig Sauer P226 Airsoft Pistols. I placed fresh paper targets 30 feet down range for each Airsoft pistol and put 10 rounds into each target shooting from a rested seated position. I did not adjust the hop-up or sights for either Airsoft Pistol prior to this test to see how close to the bullseye they would get out of the box. First up was the KWA M226-LE and it performed nicely for me shooting close to the bullseye, just a little bit low but getting around a 3.5 inch 10 round group. I then followed up with the KJWorks KJ1060 (HP-01) and also shot fairly near the Bullseye out of the box but the grouping opened up just a bit resulting in a 4.5 inch 10 round group. Still respectable for a close Airsoft quarters sidearm.
At the end of the day, the KWA M226-LE and KJWorks KJ1060 Sig Sauer P226 Airsoft Pistols came out pretty close to each other in this head to head Filed Test Shooting Comparison Review. One shot a little bit harder while the other one was a little bit more accurate but neither was a standout in either category. I guess you’re going to have to flip a coin deciding on which one of these two very well made Sig Sauer P226 Airsoft Pistols you’re going to choose but either way you will be getting a winner here.
Type: 6mm Plastic BB Airsoft Pistols. Manufacturer:KWA & KJWorks Model:KWA M226-LE - KJWorks KJ1060 (Sigt Sauer P226) Materials: Metal slide & frame. Weight: About 2.5 pounds. Barrel: Metalnon-rifled smooth bore. Propulsion: Green Gas - 12 Gram CO2. Action: Single and double action. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 24-25 rounds. FPS: 350-400 fps
Trigger Pull: The trigger pull on both the KWA M226-LE and KJWorks KJ1060 Sig Sauer P226 Airsoft Pistols is very similar, they both shoot in single and double action and both actions are fairly light on the finger. I found the KWA M226-LE had a bit lighter double action trigger while the KJWorks KJ1060 seemed lighter when shooting in single action. This is all based on simply dry firing both guns to see who the triggers felt in both their single and double actions.
Accuracy: So far I have not shot either Sig Sauer P226 Airsoft Pistol but plan to get to my Field Test Shooting Review very soon. I will be testing both Airsoft Guns out head to head to see how each performs against each other for power and accuracy.
Build Quality: The build quality for the KWA M226-LE and KJWorks KJ1060 Sig Sauer P226 Airsoft Pistols is excellent. Both KWA and KJWorks make exception quality Airguns so which ever one you pick will be a good choice here. Both Airsoft Sig Sauer P226 Pistols are all metal full Blowback ultra realistic Airguns It may just come down to a few small differences. Overall I liked the fit and finish on the KWA M226-LE just a little bit more but it was very close.
Realism: In terms of realism it does not get any more realistic than this. You are going to find that the KWA M226-LE and KJWorks KJ1060 Sig Sauer P226 Airsoft Pistols mimic a real Sig Sauer P226 very closely with working parts as you would find them in the real steel version. The only tell tale sign on the KWA M226-LE is the orange tip which by they ways was not what we ordered so in future versions they will not have orange tips. The KJWorks KJ1060 comes with a CO2 magazine which is a bit elongated from the pistol grip but there are shorter Green Gas magazines for this gun available.
I like that both guns have full blowback operation, full size drop out magazines, easy to use white dot sights.
Working de-cockers and true to form single and double action triggers.
I like the finish on the KWA M226-LE, it’s smoother and has stamped in branding on the slide and frame.
I like the Grips on the KWA M226-LE, more ergonomic and comfortable.
Fit and overall quality feels just a little bit better on the KWA M226-LE.
I like the look of the flush green gas magazine on the KWA M226-LE.
I like the additional power the CO2 Magazine will give the KJWorks KJ1060.
I like that the KJWorks KJ1060 doe snot have an orange tip.
I like the the KJWorks KJ1060 comes with a speed loader.
What I dislike about each gun:
I don’t like that either gun doe snot have adjustable sights.
I don’t like the orange tip on the KWA M226-LE.
I don’t like the way the extended CO2 mag looks on the KJWorks KJ1060
Comments: No matter which of these two awesome Sig Sauer P226 Airsoft Pistols you may choose, you are going to love it. I am a big Sig Sauer fan and so it makes sense for me to own something like this so I can shoot it any time I want without having to go to the actual gun range and spend a boat load of money firing off real 9mm ammo. You really do get a very realistic experience shooting these ultra realistic Airsoft Pistols. They are the same size and weight, all the controls work the same, the triggers have the same weigth and feel to them, the blowback action simulates the recoil. The only difference is the cost to shoot, less recoil feel obviously and the fact that most people can shoot them safely and quality in the privacy of their own back yards.
My Table Top Comparison Review of the KWA M226-LE & KJWorks KJ1060 Sig Sauer P226 Airsoft Pistols:
Trigger Pull: The trigger pull on the KWA LM4 RIS PTR and KWA LM4 KR7 PTR Full Metal GBB Airsoft Rifles is exactly what you would expect on an AR style rifle. You are required to pull the charging handle back for the first shot which draws the bolt back and chambers a round. The Single action trigger has very little take up and a light crisp release. Of course if you select full auto mode all you need to do is hold down the trigger until the magazine is empty!
Accuracy: So far I have not field tested either the KWA LM4 RIS PTR and KWA LM4 KR7 PTR Full Metal GBB Airsoft Rifles but I did throw some green gas in one of the mags and fires off a bunch of semi and full auto shots in my Sea Can Airgun shooting range. You can expect a ton of felt blowback recoil and both semi and full auto modes performed perfectly for me with no problems unloading a full 40 rounds magazine and no slow down in the blowback action.
Build Quality: The KWA LM4 RIS PTR and KWA LM4 KR7 PTR Full Metal GBB Airsoft Rifles are about as good as it gets in terms of build quality. They both have pretty much the same aluminum metal receivers and reenforced steal bolts. Fit and finishes is excellent everything just looks and feels great on these high end KWA Airsoft rifles.
Realism: The PTR in the name stands for “Professional Training Rifle” and the KWA LM4 RIS PTR and KWA LM4 KR7 PTR Full Metal GBB Airsoft Rifles not only look the part but operate as close as you are going to get to the real steal version in an Airsoft rifle. You can even interchange the stock, grips, trigger guard with MilSPec components and the same goes for the rails, all MilSpec ready. I want to mention the blowback recoil again because it is truly awesome on these rifles!
Really well built mostly aluminum and steel components.
Fully customizable MilSpec design throughout.
Amazingly realistic perfect for training.
Gas Magazine performs really well easily getting through the 40 rounds.
Type 3 Hop-up for extended range shooting.
Fully Field Strippable.
Cons:
GBB system has more limitation compared to an AEG, less rounds, not goof in cold weather.
Not the cheapest Airsoft rifles out there but worth every penny.
Hard to keep in stock.
Comments:
I know most go-to Airsoft rifles for game play are going to be an AEG since they are going to have a lot more rounds per mag and more consistent performance over a Gas Blowback Airsoft rifle. That said the KWA LM4 RIS PTR and KWA LM4 KR7 PTR Full Metal GBB Airsoft Rifles really make you want to reconsider this choice and try and figure out if perhaps you could use a Gas Blowback Airsoft Rifle on the field? Sure you will need a lot of extra magazines but man is it ever fun feeling that blowback action on your shoulder and experiencing a more true to life experience shooting the KWA LM4 RIS PTR and KWA LM4 KR7 PTR Full Metal GBB Airsoft Rifles. If you want the most realistic training Airsoft rifles then it would be hard to find a better option out there.
