Watch and see what happens when you take an RWA M1919 AEG Airsoft Machine Gun and put it head to head against the all metal F1 Chrony Chronograph. That's right, my old temperamental Chrony F-1 Chronograph meets its first opponent! Did it survive or did it bow to the hail storm of 6mm Airsoft BB's...
Recently I picked up my new Chrony Beta Shooting Chronograph to replace my F-1 that has not been working so well for me in past videos... I wanted to get outside and give it a try shooting a few of the airguns that I was not able to test out properly. Now I know that under my patio deck, the lighting is not optimal even on sunny days and because of this I have never expected to get perfectly consistent fps recording but as many of you know, my old Chrony F-1 was pretty much not working at all near the end there.
I have ordered a light kit which will help out a lot especially when summer is over and the sky becomes more overcast. But for now I decided to test my Chrony Beta Chronograph under my deck roof as I have been testing all along and see if I can get better results with this newer Beta version.
So makes sure to watch my Vimeo video testing of my Chrony Beta Shooting Chronograph shooting a selection of airguns.
As most my Vimeo Subscribers and Viewers will already know, I have been struggling with my Chrony Shooting Chronograph for a while now. I know some of it is to do with the bad lighting under my deck but over time my Chrony F-1 Shooting Chronograph has become less and less reliable to the point now that I simply don't get any usable feedback from it. If I'm lucky on a good day I might get one FPS reading out of ten shots which is nothing I can use.
So recently I went out and purchased a new Chrony Shooting Chronograph, I actually upgraded a little bit and got the higher end Chrony Beta Shooting Chronograph version which has more options than my older F-1 Chrony like:
Selector switch to change from FPS (feet per second) to MPS (meter per second).
Delivers Measurements and Statistics such as - High, Low and Average Velocities, Extreme Spread and Standard Deviation.
Retrieve individual Shot Velocities and Statistics.
Has temporary working memory.
Has 60 shot permanent memory (divided into 6 numbered strings of up to 10 shots each, with one set of Statistics for each string).
Delete individual shots (with automatic adjustment of Statistics).
Delete the content of a whole string or all data from memory.
Can be switched off, taken home & switched on again for reviewing and information retrieval.
Memory will stay even without battery.
Moves instantly from string to string, interrupts shooting on any string without memory loss, returns to any string to continue where you left off.
Change string size.
Stereo Jack for optional Printer or Remote Control.
Forget Button - To clear individual strings instantly.
In this review video I mainly show you around my new Chrony Beta Shooting Chronograph and don't really talk too much about features since it is all new to me and I have not played around with my new Beta Chrony much so far.
Since I pretty much took my Cybergun KWC Desert Eagle .50AE CO2 Airsoft Pistol right out of the box and started shooting I did not have the chance to set the hop-up or even figure out exactly where it was shooting and as I found out it was shooting rather high and the .20 gram BB's may have been a bit light since they seemed to spray all over. Either way I did manage to hit a few targets after eating up all the CO2 and shooting off two full mags of Airsoft Ammo...
Here is my second instalment for this summers Full Auto Fun Videos. in this Full Auto Fun Video I shoot my KWC M712 Broomhandle CO2 BB Pistol at some more water filled Pop Cans and Clay Pigeons in Full Auto mode of course :)
Last summer I made some "Full Auto Fun" videos and well... I had a lot of fun making them and of course shooting the full auto airguns. So I got to thinking I should make some more Full Auto Fun videos again this summer, at least for some of the new Full Auto guns I have not made these videos for yet.
So to kick it off, I brought out my Umarex Beretta Mod. 92 A1 CO2 BB Pistol and shot up some clay pigeons and water filled cans in Full Auto Mode of course :)
Make sure to watch my Vimeo video for this Comparison Review as I go into a lot of detail about the similarities and difference with each of these CO2 Blowback Pellet Guns.
All of these CO2 blowback pellet guns are made for each company in Japan (I am assuming from the same factory?)
All of the listed Pellet Airguns shoot .177 caliber pellets (Can be Alloy or Lead)
They all have double sided rotary stick magazines that hold 8 rounds on each end for a total of 16 shots per magazine.
All of the Airguns use 12 gram CO2.
All compared pellet guns have Blowback operation.
All of these pellet pistols have single and double action triggers except for the Gamo MP9 which is single action only and needs to be charged on the first shot.
They all have rifled barrels.
Here is where we find some key differences between these CO2 Blowback Pellet Pistols:
Trigger Pull: The trigger pull on the Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol is a lot better than I thought it was going to be. The blowback operation does place the hammer in the cocked position for single action type shooting but the the trigger is still required to index or advance the next pellet to line up with the barrel. Because of this, trigger pull is full length even in single action mode but you can barely feel any added friction from the indexing of the rotary magazine. All of this makes for a slightly longer trigger pull but one that is light weight with a fairly nice and easy release. For some reason the Sig Sauer P226 trigger does feel a little smoother with a slightly easier release.
Accuracy: I have not done my official Field Test Shooting Video with the Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol and I am not sure when I am going to get the chance to do so since I am waiting on a replacement Chronograph for my velocity portion of my testing. That said I can say that Sig has already done some of the work for me and conducted their own "real world" velocity testing for their ASP line of CO2 Pellet Guns. Sig tested both a standard 8.18 grain lead pellet and a high velocity 5.25 grain alloy pellet shooting an 8 shot string with each to find out average fps performance for both pellet types. The 8.18 grain lead pellet average 353 fps while the 5.25 grain alloy pellet average 399 fps. In terms of accuracy, I was able to get just under a 2 inch 16 shot well centered grouping on two separate 30 foot back tests which is pretty decent. I did notice that when shooting a 16 shot string, the first and last shot velocity will vary a fair amount as the CO2 cools the gun and lowers the fps. I would recommend taking your time in-between reloads to let the Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol warm back up.
Build Quality: The Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol is a bit on the lighter side coming in around 1.5 pounds since it does incorporate both metal and plastic construction. You will find the Sig Sauer P250 has a metal slide and plastic frames similar to the real steel version. Weighing it at 1.45 pounds, the P250 is lighter then a standard Sig Sauer P250. Sig claims that their entire APS line of pellet guns is life tested for 15,000 shots so you know this gun is going to last and provide years of shooting fun. The fit and finish seem really good, so far no real paint or finish problems and all mechanically everything is operating as it should.
Realism: The Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol is a very close replica of the real steel Sig Sauer P250. I really like the fact that the safety also works as a working decoker just as it would on the real Sig P250. Other similar working parts are the magazine release and the hammer that stays back for true single action shooting. The slide catch release and take down leaver are purely for show but they are not moulded in parts so they look good and realistic. One slight disappointment for me is when a gun does not have a cut out ejection port, that is the case with both the Sig Sauer ASP P226 and P250 but it does not take away from the shooting fun in any way.
Good overall replica of the real steel Sig Sauer P250.
Designed by Sig and made in Japan, fully Sig Sauer licensed.
Nice heavy blowback operation.
It might feel a bit light weight at first but out of the two Sig Sauer ASP pellet pistols this one seems to shoot a bit better.
Got respectable accuracy and seemed to shoot pretty hard.
Safety works as the de-cocker same as the real Sig Sauer P250.
White dot sights and accessory rail.
Great feel to the trigger not heavy or sticky in any way.
Cons:
Shots tended to slow down a bit near the end of a 16 shot strong as the gun cooled down.
Sight are non adjustable.
Ejection port is not cut out.
Comments:
What I really like about the Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol is that like all the other APS Airgun from Sig, it is a product that Sig has decided to invest a lot of their time and effort to develop rather then simply grab an existing Airgun product from a manufacturer and slap their license on it. Sigs product ingenuity is what will help to improve the airgun industry overall. Getting back to the Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol, it may feel a bit light weight at first but the heavy blowback will rock you unexpectedly! I found in terms of comparison to the Sig Sauer ASP P226, the P250 was more accurate and well centered on target for me as well. If you're a Sig Sauer P250 owner you are for sure going to want to pick yourself up one of these ASP CO2 Blowback Airgun versions so you can get some extra practice time in for pennies per shot and the ability to shoot in a lot more locations..
My Vimeo Table Top Review of the Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol:
Trigger Pull: The trigger pull on the Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol is a lot better than I thought it was going to be. The blowback operation does place the hammer in the cocked position for single action type shooting but the the trigger is still required to index or advance the next pellet to line up with the barrel. Because of this, trigger pull is full length even in single action mode but you can barely feel any added friction from the indexing of the rotary magazine. All of this makes for a slightly longer trigger pull but one that is light weight with a fairly nice and easy release.
Accuracy: I have not done my official Field Test Shooting Video with the Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol and I am not sure when I am going to get the chance to do so since I am waiting on a replacement Chronograph for my velocity portion of my testing. That said I can say that Sig has already done some of the work for me and conducted their own "real world" velocity testing for their ASP line of CO2 Pellet Guns. Sig tested both a standard 8.18 grain lead pellet and a high velocity 5.25 grain alloy pellet shooting an 8 shot string with each to find out average fps performance for both pellet types. The 8.18 grain lead pellet average 359 fps while the 5.25 grain alloy pellet average 403 fps. In terms of accuracy, I was able to get about a 2 inch 16 shot grouping on two separate 30 foot back tests which is pretty decent. I did notice that when shooting a 16 shot string, the first and last shot velocity will vary a fair amount as the CO2 cools the gun and lowers the fps. I would recommend taking your time in-between reloads to let the Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol warm back up.
Build Quality: The Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol is a very solid feeling pistol with its all metal construction. Weighing it at 2.35 pounds, it is actually a tad bit heavier then the real steel version but not by much. Sig claims that their entire APS line of pellet guns is life tested for 15,000 shots so you know this gun is going to last and provide years of shooting fun. The fit and finish seem really good, so far no real paint or finish problems and all mechanically everything is operating as it should.
Realism: The Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol is a very close replica of the real steel Sig Sauer P226, I would say it most closely takes after the MK-25 Threaded Barrel version. I really like the fact that the safety also works as a working decoker just as it would on the real P226. Other similar working parts are the magazine release and the hammer that stays back for true single action shooting. The slide catch release and take down leaver are purely for show but they are not moulded in parts so they look the part. One slight disappointment for me is when a gun does not have a cut out ejection port, that is the case with both the Sig Sauer ASP P226 and P250 but it does not take away from the shooting fun in any way.
Good overall replica of the real steel Sig Sauer P250.
Really solid feeling gun, has awesome weight to it with it’s all mental construction, pretty close in weight the real steel version.
Designed by Sig and made in Japan, fully Sig Sauer licensed.
Nice heavy blowback operation.
Got respectable accuracy and seemed to shoot pretty hard.
Safety works as the de-cocker same as the real Sig Sauer P226.
White dot sights and accessory rail.
Super easy CO2 loading system, no having to tighten a CO2 tab.
Great feel to the trigger not heavy or sticky in any way.
Cons:
Shots tended to slow down a bit near the end of a 16 shot strong as the gun cooled down.
Sight are non adjustable.
Ejection port is not cut out.
Comments:
What I really like about the Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol is that like all the other APS airguns from Sig, it is a product that Sig has decided to invest a lot of their time and effort to develop rather then simply grab an existing arigun product from a manufacturer and slap their license on it. Sigs product ingenuity is what will help to improve the airgun industry overall. Getting back to the Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol, it's a really solid CO2 Pellet pistol that is a lot of fun to shoot and for Sig Sauer P226 owners, the pellet shooting airgun version offers a super economical and safe way to get some practice in using a product that looks, feels and shoots similarly to their real steel counterpart.
My Vimeo Table Top Review of the Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol:
First off, this will be the last video where I try and use my Chrony Chronograph to determine the fps velocity for one of my airguns. It's time has come and I am officially retiring my Chrony or should I say setting aside for later destruction by means of many rounds of airgun ammo fired at it... I just need to locate and order a replacement solution, perhaps I will reach out to Chrony and see if they can help me out since they should really look into restoring my faith and many of my viewers faith in this product ;) If the airgun I am testing has blowback operation then I generally also record some slow motion video and place it in the end of the video while I am talking it out.
Moving on with my Field Test for the Air Venturi ISSC M22 CO2 Blowback BB Pistol. If you have not already checkout my Table Top Review for it then make sure to do so for some close up video and the main features and benefits.
As per normal my Field Test Shooting video is composed of a Chronograph test which in this case resulted in pretty much no data other than one recorded shot which may or may not even be accurate? I also step back 30 feet and shoot 10 rounds on a paper target with my Air Venturi ISSC M22 CO2 Blowback BB Pisto to figure out how close of a grouping I can get for the sake of accuracy purposes. I do us a somewhat rested shooting position which allows me to in most cases get pretty decent results with less human factor involved.
In terms of FPS for the Air Venturi ISSC M22 CO2 Blowback BB Pisto, all we can really go on are the claimed fps specifications which are 400, I would say based on how quickly rounds get to the target and how hard they hit that 400 fps is about right, perhaps even a little more? Maybe once I get my new Chronograph I will have to revisit this gun and see what it can do.
Accuracy wise I was able to fire 10 rounds within a nice 2 inch grouping, they did shoot a bit left for me but the good news is that the Air Venturi ISSC M22 CO2 Blowback BB Pisto has an adjustable rear sight for windage so this can be corrected for each user. The blowback Action is pretty hard on this gun, very quick and snappy, it is also fairly loud when using a new CO2. There is a fair bit of trigger take-up since the first stage of the trigger pull also chambers a round into the barrel form the full size drop out magazine. Once you get to the break point of the trigger there is a bit of extra tension followed by a distinct release. It may not be the smoothest trigger I have used but it does work just fine.
Overall the Air Venturi ISSC M22 CO2 Blowback BB Pisto has a lot going for it, good looks, blowback operation with a full size drop out magazine, an adjustable rear sight, decent power and accuracy and it is an excellent replica for the real steel ISSC M22.
In this Review Video I focus on the shooting performance of the Sig Sauer MPX ASP .177 Caliber Pellet Rifle to find out what kind of FPS we can get out of it and exactly how accurate the MPX is from 30 feet back using a fairly stable semi rested shooting position. I'll tell you right away my Chrony Chronograph has officially called it quits and I will be looking at replacing it for future Field Test Shooting videos. Lucky for us Sig sent me their real world inhouse testing using both 5.25 grain high velocity pellets and standard 8.18 grain lead pellets.
Here are the average results Sig achieved from each pellet type shooting an 8 shot string.
5.25 Grain Alloy High Velocity Pellets:
FPS - 506
Energy in Foot pounds - 2.98
Energy in Joules - .1257
Temperature at time of testing - 71 Degrees Fahrenheit
8.18 Grain Standard Lead Lead Pellets:
FPS - 447
Energy in Foot pounds - 3.63
Energy in Joules - .153
Temperature at time of testing - 71.5 Degrees Fahrenheit
In terms of accuracy, this rifle is made to shoot at much further out ranges than 30 feet but I was still able to get on what kind of a grouping is possible with the Sig Sauer MPX ASP .177 Caliber Pellet Rifle. I first shot 10 rounds at my paper target and then had a quick look. I was able to get a nice 1 inch grouping which I am sure I could improve upon with some more shooting time with the rifle. I was also not using a magnified scope, just a standard red dot. I then shot the remaining 20 rounds to finish off the 30 round belt fed magazine and for the most part the majority of the pellets all fell within the first 10 shot grouping and I did rip these shots off pretty quickly, about as fast as I could pull the trigger that is.
All in all the Sig Sauer MPX ASP .177 Caliber Pellet Rifle is a good performer, I am very happy with FPS form an 8 grain pellet consistently hitting 450 FPS, that's plenty fast enough to shoot all kinds of targets even out at further ranges. Accuracy was also consistent even under rushed shooting so I can imagine the Sig Sauer MPX ASP .177 Caliber Pellet Rifle would make a great trainer for tactical shooting situations. I thing Sig has a real winner here, great looks, excellent quality and good performance all at a reasonable cost. I just hope we get them here in Canada soon...
I wanted to make a quick update video to let everyone know what I will be up to over the next few weeks since it will effect my video production just a little bit, that said I will do my best to keep the videos coming...
If you remember last year around August, I entered a Fitness contest where I competed in Men's Physique. Well I did fairly well and placed 1st in two divisions, Masters and Open. What this means is I am now qualified to compete in my local Provincial Finals this year which is coming up in less than two weeks. The event is called the Vancouver Pro Am and it will be held in Vancouver BC Canada.
To get to the point, my contest prep especially the last couple of week is fairly taxing on me physically and mentally, it also takes up some of my time. So my videos may not be as regular and they may not be as put together since my mind is not working 100% right now due to the lack of food and carbs I am not eating ;) Anyway I will do my best! You can follow my Fitness journey over at www.GetFitOver40.com.
I also talk about two new Sig products I will be picking up next week to review, the Sig Sauer P250 and Sig Sauer P226 CO2 Blowback Pellet Pistols. I hope to at least have a preview video for you later on next week.
Materials: Plastic main body with some metal parts.
Weight: 1.6 pounds (708 grams).
Barrel: 5.5 inches - Metal none rifled.
Propulsion: 12 gram CO2.
Action: Blowback single action only.
Ammunition Type: 4.5mm Steel BB's.
Ammunition Capacity: 20 round top loading stick magazine.
FPS: 350+.
Trigger Pull: The trigger pull on the Daisy Powerline Model 400 CO2 Blowback BB Pistol is single action only and has about a medium pull to it, not the lightest single action trigger I have shot by far but not too heavy by any means. There is some initial take-up with a noticeable release point.
Accuracy: Make sure to watch my full Field Test Shooting video for th PHOTO4 Daisy Powerline Model 400 CO2 Blowback BB Pistol. When performing my usual 30 foot out paper target shooting performance test I was able to get about a 2 inch 10 shot grouping using a semi rested stance. This pistol did shoot rather on the high side so you will have to aim low as the sights are non-adjustable. In terms of velocity I was able to get fairly consistent 350fps performance using a brand new CO2, this is pretty good considering this is a 20 year old pistol and may have been one of the first blowback airguns to hit the market. The Daisy Powerline Model 400 CO2 Blowback BB Pistol was a bit of a CO2 hog only getting around 50 shots out of one 12 gram CO2.
Build Quality: The Daisy Powerline Model 400 CO2 Blowback BB Pistol is a mainly all metal airgun but it is solid and well built, The plastics used long ago in my opinion are superior in terms of longevity to today plastics. Being a Japan built gun is also a plus and you will find metal parts where they need to be as in the hammer, trigger, barrel, safety and many other internal parts. Keep my used pistol is over 20 years old and still looks and works like new.
Realism: The Daisy Powerline Model 400 CO2 Blowback BB Pistol is an obvious replica of a Desert Eagle Semi Auto Pistol, there are no licensed markings but there is no doubt what this gun is intended to look like. In terms of size and overall appearance it is a good copy of a real steel Desert Eagle but it does weigh in a lot lighter being made mostly from plastics. Some mechanical parts are moulded into the gun like the safety and slide catch but the blowback operation helps add back to the realism. Of course the top loading 20 round BB magazine is not at all what you would expect to find on the real Desert Eagle, that said it is practical for loading a BB gun.
Trigger Pull: The trigger on the SM Mod 110 8mm Blank Pistol is single action only so you will need to rack the slide to not only chamber a round but also cock the internal hammer / striker, follow up shots will case the slide to cycle on it own allowing for single action shooting. The trigger is rather nice with just a slight bit of take-up followed by a light release.
Accuracy: NA.
Build Quality: The SM Mod 110 8mm Blank Pistol was made in West Germany sometime back in the Mid 70's so this pistol is 30-40 years old and still looks great. Mine does have some slight pitting on the right side I am assuming from sitting in the box up against the manual which more than likely may have an acidic property to it. Even so this pitting is minor and the gun is in good condition overall. Like most blank pistols much of the gun is made out of pot metal (a zinc alloy) but it does have hardened steel parts where they need to be (Barrel, ejector, hammer, pins, screws and magazine).
Realism: The SM Mod 110 8mm Blank Pistol is not a true replica as far as I can tell is not an actual replica of any real steel semi-auto pistol in production but it does look a bit like the American Derringer LM5. In terms of looking like a gun it looks like what you would expect a small caliber sub compact pistol should look like and all operation is exactly like a semi auto pistol with the exception that the SM Mod 110 only shoots blanks since the barrel is obstructed with a metal rod.
I really like unique blank guns since they are so hard to locate here in Canada. When I saw this sitting on the table at my local gun show I kind of wondered if someone had accidentally left out a prohibited firearm but once I inspected it I quickly realized it was a blank shooter and decided right there and then I had to have it. I did pay close to $200 for it but to me it is worth it simply because this little blank shooter is a rare find and it was also in really good condition and even came with the original 8mm self defence pepper blanks. The SM Mod 110 8mm Blank Pistol is for sure a blank shooter I will be holding onto for some time...
My Vimeo Table Top Review for the SM Mod 110 8mm Blank Pistol:
I was personally confused about some of the similarities and differences between several models of KJWorks Beretta M9 CO2 Blowback Airsoft Pistols, so I decided to make a video where I go over 4 models of KJWorks M9 Pistols and point out the commonalities and differences between them.
Here are the 4 versions of KJWorks Beretta M9 CO2 Blowback Airsoft Pistols:
All of them come with interchangeable 25 round CO2 Magazines.
All of them shoot around 360+ fps.
All have a metal slide and frame.
All weigh close to the same weight (2.1 - 2.4 pounds).
All shoot in single and double action.
All have ambidextrous safeties.
All have white dot sights.
Prices range from $184 -$200.
Here is a list of the differences between them:
The VE, Vertex and M9A1 come in a semi gloss finish while the Tactical is more of a matt black.
The VE and M9A1 have rails for accessory attachments while the Vertex and Tactical do not.
The Vertec, Tactical and M9A1 have laniard loops while the VE does not.
Some slight trigger guard differences between the models but very subtle.
The Vertex and M9A1 share the same style classic Beretta pistol grip, The Tactical has a tactical finger pistol grip and the VE has it’s own unique pistol grip.
Make sure to watch my Vimeo video where I cover this information in detail:
Trigger Pull: The single action only trigger pull on the Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol is very nice, there is some take up required be for the release but the release or break point is very smooth, perhaps a little too smooth since there is no real noticeable resistance so you will have to get use to the range in the trigger pull in which the release takes place. Since there is no external hammer you will need to draw the slide back in order to cock the internal striker.
Accuracy: Make sure to checkout my full Field Test Shooting Video for the Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol where I test out this fun S&W M&P40 BB shooting replica by shooting some BB's through my chronograph and also at a paper target to find out how it performs. In summary I was able to get an average of around 300 fps and accuracy in the 2 inch size groupings from 30 feet away. Not bad for a full blowback short barrel CO2 BB pistol. It did shoot a little low so some manual target sighting adjustments may be required.
Build Quality: Very good, with metal and plastic construction where you would find it on the real steel S&W M&P40. I am fairly certain the the Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol is made by KWC which has produce some other nice quality examples of other full blowback replica BB and Airsoft pistols. As with most KWC powder coated airguns, you will get some wear in the high spots of the finish over time but this is true even with real steel blued guns.
Realism: This is by far the best example of a 4.5mm BB shooting Smith & Wesson M&P out there, I have had several real steel M&P40 owners comment on how accurate this BB copy really is including how the barrel drops from its locked position and angles down and up during blowback operation. You even get interchangeable grip backstraps to accommodate different sized hands. And of course all the mechanical parts function as you would expect them to including being able to fully field strip the Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol.
Most accurate looking steel BB shooting replica of the S&W M&P40 to date.
Good weight and feel to it.
Metal and plastic parts where you would find them on the real steel version.
Realistic working safety and working slide catch and release.
Full size dropout metal magazine that holds BB's and CO2.
Can be field stripped like original Smith & Wesson M&P40.
Fully Smith & Wesson licensed via Umarex.
Rail for add on accessories.
White dot sight with adjustable front sight for windage.
Comes with three sizes of interchangeable grip backstraps.
Cons:
FPS may be low for some people that like the more powerful CO2 pistols.
Shoots a bit low out of the box.
Ugly white warning instruction on the slide.
Comments:
Many of us have been waiting for a blowback Smith & Wesson M&P and now we have one. Thanks to Umarex, we also get it in a fully licensed version to make it even more realistic! Everything about the Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol is so very accurate to the real steel version other than of course the fact that it shoots 4.5mm Steel BB's using CO2 but isn't that why we are interested in it in the first place? If you are a Real Steel S&W M&P owner than you are going to have to get yourself one of these as a low cost and easily accessible training alternative. A great choice fro anyone else looking for an ultra realistic 4.5mm CO2 blowback pistol what ever your purpose is.
My Vimeo Videos for the Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol:
In this Field Test Shooting video I take out my Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol and put five shots through my Chronograph to see what the real word velocity performance will be, I also test the accuracy of the Smith & Wesson M&P40 by placing ten shots down range at a paper target setup 30 feet back using a semi rested shooting position(Pistol rested on a sandbag while standing in the back). I also include some slow motion video of the Umarex Smith & Wesson M&P40 CO2 Pistol blowback action close up for you to see how it cycles.
For my Feet Per Second portion testing I inserted a brand new CO2 cartridge along with 5.1 grain RWS nickel coated 4.5mm Steel BB's. The temperature outside was 15 degrees Celsius (59 Fahrenheit), so not overly warm or cold, On a warmer day I would expect a little higher fps for sure. Umarex claims a velocity of 310 fps from this pistol, As my Chronograph was misbehaving a little I was only able to get a three shot to record but was able to get a fairly realistic average of 299 which was pretty close to the claimed fps for the Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol.
Moving on to the Target Accuracy portion of my Field Test, all 10 shots landed within a 2 inch grouping, not bad for a full blowback BB pistol. I did notice the shots where a little low so some sight placement adjustments would be required depending on your shooting range since the sights on the Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol are non-adjustable for elevation, they are however adjustable for windage using the front sight to make adjustments. The blowback action is nice and heavy and the single action only trigger release is fairly light and kind of sneaks up on you a bit til you get used to it. You should be able to get around 4 magazines out of the Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol as long as you take some time in-between loading up your magazines to let both the magazine and gun warm up a bit from the cold CO2.
I have been waiting a while for this version of the Full Blowback Smith & Wesson M&P40 CO2 BB Pistol, and I am happy to say I am not disappointed in the least, it's a really great replica from Umarex and a must have BB pistol in my books!
In this Field Test Shooting video I take out my Umarex Beretta Mod. 92 A1 CO2 Blowback 4.5mm BB Pistol and place five shots through my Chrony Chronograph to find out what the real word velocity performance will be and I also test the accuracy of the Umarex Beretta Mod. 92 A1 CO2 Blowback 4.5mm BB Pistol by shooting ten rounds down range at a paper target from 30 feet back using a semi rested shooting position(Gun rested on a sandbag, standing in the back). I also include some slow motion video of the Umarex Beretta Mod. 92 A1 blowback action close up in both semi auto and full auto modes.
For the Feet Per Second portion of my test I used a brand new CO2 along with 5.1 grain RWS nickel coated 4.5mm Steel BB's. The temperature outside was 15 degrees Celsius (59 Fahrenheit), so not super warm or cold, I would expect a little higher fps on a warmed day. Umarex claims a velocity of 310 fps, I was able to get a five shot average of 322 which was nice to see a higher than claimed fps for the Umarex Beretta Mod. 92 A1 CO2 Blowback 4.5mm BB Pistol.
Moving on to the Accuracy portion of my Field Test, I was able to get all 10 shots within a 2 inch grouping, not bad for a heavy blowback BB pistol. I did notice the shots where a little low and to the right so some shot placement adjustments may be required depending on your shooting range since the sights on the Umarex Beretta Mod. 92 A1 CO2 Blowback 4.5mm BB Pistol are non-adjustable. The blowback action is nice and strong and the trigger is also very typical to what you would find on a Beretta M92. Shooting in full auto mode is a lot of fun and really gets your hand rocking. You should be able to get around 4 magazines in semi auto shooting mode and closer to 3 magazine in full auto shooting mode.
This Vimeo Video Preview covers three really nice CO2 Pistols recently added to our Replica Airguns Canada Store. One is a pellet pistol from Gletcher called the Gletcher NGT R which is for the most part the same as the standard 4.5mm Steel shooting NGT but the R model is made to shoot .177 caliber pellets so it also has a rifled barrel. I am expecting pretty decent accuracy with this pistol!
Last but perhaps the best or at least most anticipated gun I am showing off today is the Umarex S&W M&P40 Full Blowback CO2 BB Pistol. This is a really nice acurate replica of the real steal S&W M&P40 with full licensing and pretty much every part operational like it would be on the .40 caliber version.
Here are some basic Specifications for all of these fine Co2 Airguns...
Action: Semi and full auto blowback, single and double action.
Ammunition Type: 4.5mm Steel BB's.
Ammunition Capacity: 18 rounds.
FPS: 310.
Trigger Pull: The trigger pull on the Umarex Beretta Mod. 92 A1 BB Pistol is like what you would expect from a real Beretta 92 A1, it offers both single and double action but most of the time you will be shooting in single action since the blowback cocks the hammer after each shot. Single action has a little bit of take-up but has a predictable release that is not overly light or heavy. Double action shots are longer and heavier which is as expected.
Accuracy: I have not shot this "version" of the Umarex Beretta Mod. 92 A1 but it will undoubtedly perform very similar to the many other full blowback CO2 pistols I have tested like the KWC and Cybgergun M92's, 1911's and Sigs. I did notice the slide spring on the Umarex Beretta Mod. 92 A1 CO2 Blowback 4.5mm BB Pistol to be very firm so I am expecting it to have pretty good blowback action. One other consideration is this CO2 airguns offers both semi and full auto shooting options but with the heavy blowback, don't expect much accuracy when shooting in full auto mode :)
Build Quality: Very good, with almost all metal construction, good weight and craftsmanship. Don't quote me on this but I have a feeling the Umarex Beretta Mod. 92 A1 CO2 Blowback 4.5mm BB Pistol may be made by KWC, if this is the case then we know to expect the same quality as we have found with other KWC full blowback airguns which is pretty good overall. There may be some wear in the high spots of the finish over time but I kind of like this since it gives the gun a more realistic look.
Realism: This is by far the closest Beretta Model 92 out there, even the magazine butt plate looks the part, the safety is true to form and it is full licensed and trademarked throughout the gun via Umarex. I'm not sure if the real steal Umarex ever offered full auto or not but we can look past this for the sake of how much fun it is going to be shooting in full auto! The only negative aspect in terms of realism is the white warning writing on the left side of the slide.
Your choice of shooting in either semi auto or full auto mode.
Really nice replica of the original Beretta 92 A1.
Great weight and feel to it.
All metal design, fit and finish is very good.
Strong slide spring so it should have heavy blowback action.
Realistic working safety and working slide catch and release.
Full size dropout metal magazine that holds BB's and CO2.
Can be field stripped like original Beretta 92 A1.
Fully Beretta licensed.
Cons:
Will probably eat CO2 especially in full auto mode.
Non-adjustable sights.
Ugly white warning instruction on the slide.
Comments:
I know the KWC M92 and Cybergun GSG 92 have been out for a while and the Umarex Beretta Mod. 92 A1 CO2 Blowback 4.5mm BB Pistol is along the same lines, but I do like that it is a true Beretta Replica rather than the Taurus copy. I like that Umarex went the extra mile and made the magazine look the part with a much shorter butt plate and adding semi and full auto right out of the box with a dedicated selector switch is pretty cool too. I am really looking forward to testing this gun out and seeing how the blowback action combined with the full auto ability is going to recoil, I have a feeling it's going to kick like a mule!
My Vimeo Videos for the Umarex Beretta Mod. 92 A1 CO2 Blowback 4.5mm BB Pistol: