And the winner of this years Best Halloween Costume Contest is YouTuber mp032. Congratulation on your great costume and very creative and well done video.
I will be sending him a Replica Airguns Coupon Code worth $100!
As with most new items I pickup, I like to share them with everyone. I am checking into some more ROHM blank guns, an RG-59 and RG-88, the RG-59 is a lot like the ROHM RG-56 .22 caliber blank revolver I sell in the Canada Replica Airguns Store but in .380 caliber and the one I show off here is a 5 shot two-tone model. Other than that they use the same frame and mechanical parts throughout.
I also received a black/blued ROHM RG-88 which is kind of like a Walther PPK in design, it field strips the same, has a similar safety setup and even has a similar size and look to it although it is definitely not a replica of a Walther PPK. I am impressed with the overall quality of the ROHM blank guns, material used, fit and finish is very good.
Lastly, I acquired a pre-owned Umarex CP99 CO2 Pellet Pistol from a customer of mine. It is in pretty much in new condition and is one of the Umarex guns I was missing in my collection and have been looking to add. The Umarex CP99 is a pretty good replica of the Walther P99 and uses the standard Umarex metal 8 shot rotary magazines and shares the same CO2 grip fed magazine as the CPSport. The CP99 is German made so it's not one of the lower cost Umarex pistols out there but you do get what you pay for ;)
I've had lots of requests to review the Daisy Winchester Model 11 and to give my opinion how it stacks up with the Cybergun Tanfoglio Witness 1911. I will be doing a full review of the Daisy Winchester Model 11 Colt 45 1911 replica shortly but wanted to kick things off with my comparison portion.
Your best off to simply watch my Vimeo Video Comparison of the Tanfoglio Witness 1911 and Winchester Model 11 but here are my thoughts on some of similarities, strengths and weaknesses for both 1911 syled airguns.
Similarities:
Both are good replicas of the classic Colt 45 1911 semi auto pistol.
Both shoot 4.5mm Steel BB's and use standard 12 gram CO2.
Both are mostly metal and weigh close to 2 pounds with the Cybergun Tanfoglio Witness weighing about 40 grams more.
Both come in a nice cardboard box.
Both have blowback operation with slides that lock back after the last shot.
Both have true 1911 styled single action only triggers.
Strengths:
The Winchester Model 11 has the higher feet per second rating and gets more shots per CO2 (410fps vs 320fps).
The Tanfoglio Witness 1911 has a full size drop out metal magazine that holds the BB's and CO2.
The Winchester Model 11 is more economical to buy and shoot.
The Tanfoglio Witness 1911 has a more realistic "full" blowback operation.
The Winchester Model 11 has less intrusive warning markings on the slide.
The Tanfoglio Witness 1911 has a working Grip Safety.
The Winchester Model 11 is made in Japan.
The Tanfoglio Witness 1911 can be field stripped similar to a real 1911.
Both have fairly high capacity magazines (16 BB's for the Winchester and 18 BB's for the Tanfoglio).
Weaknesses:
The Winchester Model 11 has a funky extra button on the thumb safety?
The Tanfoglio Witness 1911 tends to use a lot of CO2 with less average fps.
The Winchester Model 11 has more free-play (wiggle) in the slide.
The Tanfoglio Witness 1911 magazine are more expensive and can be hard to find at times.
All in all I really like both guns, and what really counts is how they feel and shoot and after a quick outside testing with the Daisy Winchester Model 11, it seemed to shoot and work pretty good for me. Realists may prefer the Cybergun Tanfoglio Witness 1911 because it is more realistic in terms of how it's built and how it functions but as a daily shooting gun, the Daisy Winchester Model 11 hits harder and gets more shots per CO2, all while still giving the shooter a very realistic 1911 styled shooting experience.
Watch my Vimeo video Comparison of the Daisy Winchester Model 11 vs the Cybergun Tanfoglio Witness 1911:
Trigger Pull: The trigger pull on the ASG/KWC MP9 A3 is single action only as the charging handle has to be pulled back to open and release the bolt for the first shot. There is a trigger safety but it is not noticeable when shooting this Airsoft machine gun. There is a short take-up and then a light release and short reset.
Accuracy: Right away I put my NcSTAR 1x25 Red Dot sight on the ASG/KWC MP9 A3 as it was a perfect fit for this small and compact machine pistol, it did not take long to sight it in and I was able to get decent accuracy in both semi auto and full auto burst due to the mild but very fast cycle rate. I was able to get a 2 inch grouping at 30 feet out using a rested position. In full auto mode the grouping did not really get too much wider. I also got between 350 and 370 fps when testing the ASG MP9 on my Chronograph.
Build Quality: The ASG/KWC MP9 A3 Airsoft Machine Pistol is built very well, using similar components that you would find on the real steel version so yes it has a plastic shell but that is to be expected. The ASG/KWC MP9 A3 does use lots of metal where it needs to be like in the internal parts, pins, bolt, barrel, rails and even the magazine. The fit and finish is near perfect!
Realism: I have to say the ASG/KWC MP9 A3 is pretty much a bang on copy of the real steel Brügger & Thomet MP9 A3. The only telltale sign is the ASG branding on the right side along with the 6mm caliber beside the ASG logo. One other small detail is the magazine which is metal on the Airsoft version where as you would find the real version uses a transparent polymer magazine.
Rate of fire is very fast and does not slow down much even when the gas is running low.
Good overall power for a short barreled gas blowback gun.
Very nice trigger with working trigger safety.
Excellent replica of the real steel version in just about every way.
Can add a lot of gear and make this gun your own.
Decent price for all you get out of the ASG MP9!
Cons:
Bolt didn't lock back for me when the gun got really cold?
Real magazine would actually be transparent polymer.
Comments:
I really like the ASG/KWC MP9 A3! I love the look, I love the features and the price is also really good for what you are getting. I was really impressed with the super high cycle rate and because of the small low weight bolt the gun does not move around too much or slow down in rounds per minute even when you do a full mag dump. There is however just enough blowback recoil to give you that GBB realistic feel! I also found that the magazine holds a lot of gas so it is possible to get two magazine worth of shots out of a single fill, that's around 100 shots. I also like how easy it is to add to the ASG/KWC MP9 A3, I had mine pimped out and looking amazing right away and suggest if you get one you do the same :)
My Vimeo Video of the ASG/KWC MP9 A3 Airsoft Machine Pistol:
For my Canadian Blank Gun collectors, I'm not going to list these ones as Silent Auction items this time around so if you're looking for an EKOL blank gun, I have one of each of the following versions for sale:
This one has to be the coolest Machine Pistols out there!
The KWA (ASG) B&T MP9 A3 Black GBB is a compact gas blowback machine pistol licensed by the original manufacturer Brügger & Thomet, Switzerland. The A3 version has a bottom rail and a folding stock and the whole body is made of reinforced fiber polymer. The whole construction of the MP9 is very realistic and it is field stripped as the real thing. The cocking handle is functional with the realistic metal bolt. The B&T MP9 has adjustable hop-up and both semi and full auto firing mode can be selected. Furthermore the trigger has an active safety function.
Plastic 6mm Airsoft BB's
(GBB) Gas Blow Back
Semi & Full Auto
366+ fps w/ .2g
Adjustable Hop Up
3.9 lbs
48 Round Magazine
11.5 Inches Folded - 20.5 Inches Open
Reinforced Fiber Polymer Body
Field Strips like the Real Steel
NO CLEAR sections (All Black) and does NOT have orange tip!
Take aim and fire with "The gun that helped to change the world". The Thompson Military M1A1 AEG is a battlefield weapon with a serious attitude. This beautiful gun is a fully licensed 1:1 scale replica of a real Tommy gun, and features a full metal body with artificial wood grain finish, a 60 Rd plastic magazine, and a shot velocity of 500 fps (using .20g BBs). The M1A1 also features an adjustable BAXS System for increased power and shooting accuracy. Airsoft enthusiasts will love the stunning classic era looks and awesome semi/fully automatic firepower of the Thompson Military M1A1 AEG. Do not miss this gun! Recommended for use with high quality .25g BBs.
It's that time of year again, when you can actually take your Airgun or Airsoft gun with you to a party (private house party of course). So once again I'm having a Halloween Costume Contest and like last year your costume should revolve around a weapon of some sort. That weapon could be a gun, knife, bat, axe or what have you...
You will need to upload your video as a response to my YouTube video for this contest before the end of day on October 31st. I will check them all out and pick my favorite as the winner. The prize portion of the contest can only go to a Canada or US customer as my Replica Airguns Store only ships within North America but everyone is welcome to upload their costume video.
$100 to the winner - so good luck and may the best costume win!
By the way, the winner of my last giveaway (10,000,000 Video Views) was Charles P with order number 20127595. Charles will be receiving a coupon code worth $211.30 which is the total value of his order.
Trigger Pull: The trigger pull on the WE G39C is about what you would expect from a Single action only Semi Auto rifle, it has a very slight take up and then about a 4 pound trigger pull that is crisp and smooth.
Accuracy: Out of the Box the WE G39C shot great up close and farther out, the hop-up seemed to be already dialed in, and even though I was using only .20 gram BB's which is a bit light for this gun, I still found they tracked well and stayed on target both near and far. My 30 foot semi rested testing produced a nice 2 inch grouping. Shooting the barrel out on the tactical range I did have to aim just a bit higher when back out at 60 or more feet away. Maybe a slight bit more hop-up would do the trick.
Build Quality: The WE G39C is very well made, yes it has lots of polymer but so does the real version and the plastic seems very durable, The fit and finish looked great and there is a lot of metal in and around the G39C where it would be on the real steel gun and where it is really required to be. Like the trigger, flash hider, rails, pins, switches, rear sight, magazine and most internal parts also.
Realism: I bet if you had the real G36C sitting beside the WE G39C you would be hard pressed to tell them apart? WE did a great job making this Airsoft version very believable not just in appearance but also when field stripping it and shooting it with it's heavy bolt and felt blowback recoil.
Amazing attention to detail, just like the real H&K G36C.
All metal internals and metal external mechanical parts.
Semi auto & full auto selectable.
Awesome blowback kick really hits you in the shoulder.
Field strips just like the real steal version.
Nice high 400 FPS and good accuracy near and far.
Full ambidextrous, even the charging handle can be switched side to side.
Can get up to three magazines per propane fill up.
Very well priced for how awesome it really is.
Cons:
Some people may not like that it is a polymer built gun externally but it is what it is!
And that's it!
Comments:
So far I have been impressed with We an Airsoft company, they really know how to make very realistic and high quality products. I wasn't sure if I was going to like the mostly polymer external build on this gun but the sheer quality and solid build took away any ideas that tis Airsoft gun would be anything like a toy. The WE G39C is one of the best performing GBB Airsoft guns I have tried out getting up to 90 shots per gas fill on a magazine which is very impressive. We was also able to keep the price down which means more people can get into one of the G39C's. If you've been thinking about adding one of these to your arsenal I don't see any reason why not to!
I recently picked up a couple of really nice condition pre-owned Air pistols, both replicas of some IWI (Israel Weapon Industries) semi auto pistols. The biggest and baddest being a very authentic replica of the notorious Desert Eagle. This Umarex CO2 Airgun Desert Eagle shoots .177 caliber pellets using an 8 shot rotary magazine and has realistic blowback action with over 400 fps velocity. It has excellent accuracy and packs a real punch.
I also have my Cybergun Jericho 941 which again is a very believable replica of the real steel semi auto pistol, some people refer to it as the Baby Eagle. The 4.5mm BB version has a full metal slide and full size drop out metal magazine that holds the BB's and CO2.
Both guns are in like-new condition and come with the original boxes and manuals, the Desert Eagle even comes with three magazines.
To get in on the bidding, simply Email Me Here with your highest bid by no later than October 10th 2012 at midnight. At the conclusion of this Silent Auction I will notify the winner.
This Airgun Silent Auction is open to both my Canada and US customers, Canadian Customers will pay an additional $17.99 for Shipping/Handling plus their local provincial sales Tax. US Customers will pay $29.99 International Canada to US Shipping & Handling but will not pay any sales tax. Good luck to everyone!
Checkout my related links for both of these very nice air pistols:
Action: Semi auto, single & double action with blowback.
Ammunition Type: .43 caliber paintball or rubber bullet.
Ammunition Capacity: 9 round magazine.
FPS: 250-300fps.
Trigger Pull: The trigger pull on the Real Action Paintball RAP4 X50 is rather nice in single action, being a true blowback gun, the cycling of the slide not only chambers a round but also pre-cocks the hammer allowing for a very smooth and light single action trigger pull. There is also a working de-cocker that allows you to release the internal hammer. Double action is noticeably heavier but would only really be used on the first shot if you had already used the de-cocker.
Accuracy: After my previous review of the RAM X50 I was expecting this gun to perform pretty much the same. I did find it to be a bit more accurate within the 20-25 foot range using the rubber balls but when I got out into the field and switched over to the Paintballs I found that they where really hooking and darting all over the place? Mind you, this gun was right out of the box and not broken in yet. I also got a bit lower fps (right around 250) out of the RAP4 RAM Walther P99 compared to my RAM X50 but again my review unit had not been adjusted in any way and I imagine I could turn it up a bit to get more fps out of it if I wante to. The plus side is I was able to get an astounding 8 magazines worth of shots out of one CO2.
Build Quality: The RAP4 RAM Walther P99 styled Paintball Pistol is built very well, it does have a polymer frame but the gun overall has lots of metal parts and a very good overall 2 pounds weight to it dry. The blowback action is very snappy and all the mechanics and fit and finish all look and function very nicely. The slide spring is nice and firm giving this paintball gun a snappy recoil and the feel closer to a real gun than that of an airgun.
Realism: The RAP4 RAM Walther P99 was primarily made to simulate real word shooting environments for Police and Military users and even includes Walther branding and licensing, it is a very believable looking and functioning copy of the real steel semi auto pistol it replicates. Other than the exception of the CO2 Cylinder hanging a bit far out of the bottom of the handle. The RAM P99 would be hard to tell from the actual Walther P99, especially when looking down the large .43 caliber barrel. The Blowback action and firm recoil help pull off the believability when shooting this ralistic Paintball Pistol.
Very Accurate Walther P99 replica including licensing and trademarks.
Everything works pretty much like the real gun so a great training tool.
Good accuracy up close and lots of shots per CO2 for such a large round.
Nice light single action trigger and working de-cocker.
Fairly affordable.
Cons:
CO2 cylinder sticks out from the handle and looks a bit odd.
Paintball accuracy out at range was unpredictable.
Does not field Strip conventionally.
Comments:
This was my second time testing a RAP4 RAM product and again I took the chance to use it as it was intended to be used - in the field going through simulated tactical situations. My targets where barrels this time but they could have been other people with similar paintball guns shooting back at me which would have put even more pressure on me and forced me to really see where my mistakes are being made. That's the whole point of this type of training airgun, make it as real as it can be without your actual life being in danger so that when you are in danger you will not have to think about what you are doing but simply react based on your previous training. I think anyone who is a gun owner wanting to improve their reactive shooting skills should invest in one of these Paintball guns. One day you may thank yourself but let's hope it does not come to that!
Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"
All references, photos and video claiming that any item in this Review/Video looks like a Glock or is a Replica of a Glock in any way shape or form have been removed from this post as requested by Glock"Renzulli Law Firm"
Type: Airsoft GBB pistol. Manufacturer: KSC? Model: NAME REMOVED 17. Materials: Plastic & metal. Weight: 1.6 pounds. Barrel: 4 inch, non-rifled. Propulsion: GBB - Propane. Action: Semi auto - single action only. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 23 round drop out all metal magazine. FPS: Up to 330. Trigger Pull: The trigger pull on this Mystery NAME REMOVED 17 GBB Airsoft pistol is very nice with some take-up at the beginning but once you hit the resistance part it is smooth and the release is very light. The NAME REMOVED trigger safety actually works on this model which is a nice touch!
Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"
Accuracy: I found the (KSC) NAME REMOVED 17 to have very good accuracy, getting about a 2 inch 8 shot grouping from 20 feet out in a semi rested position (sand bag up front, standing in the back). I also put 5 rounds through my Chrony Chronograph and this Airsoft Gas Blowback pistol averaged right around 326 fps using .20 gram 6mm plastic Airsoft BB's.
Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"
Build Quality: The (KSC) NAME REMOVED 17 Airsoft pistol uses a combination of plastic and metal and has a decent overall weight and feel to it thanks to the full size drop out metal magazine. The frame like a real NAME REMOVED is plastic but the slide and outer barrel are also plastic which on real steel NAME REMOVED would not be the case. Even so the overall weight is good and the fit and finish is very good. Even though this is a pre-owned Airsoft gun it is in as-new condition and seems to be holding up very well.
Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"
Realism: The (KSC) Airsoft NAME REMOVED 17 is very realistic in appearance and operation with all parts working exactly as they would on a real NAME REMOVED 17. Even the trigger safety works and field stripping this Airsoft gun is the same as a real NAME REMOVED. NAME REMOVED trademarks are present throughout, the only real giveaway is the plastic slide and outer barrel but you would need to examine this gun close up to see this for yourself. Purchased privately, check out some other Airsoft guns in theReplica Airguns Store.
Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"
Pros:
Very realistic and accurate licensing.
Got a tight two inch group but was a bit low, hop up should get it back up.
Decent FPS for a short barreled GBB Airsoft gun.
Even thought the frame and slide are polymer, it has good weight to it.
Everything works like the original, field strips and most mechanical parts are metal.
High capacity 23 round full size drop out metal magazine.
Adjustable rear sight for windage but is a bit lose on mine.
Good usage of the gas - two full magazines.
Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"
Cons:
Hard to get here in Canada.
Mostly plastic main build - slide and outer barrel are plastic.
Rear sight was a bit lose.
Comments: I am hoping that someone will know for sure who make this Airsoft NAME REMOVED 17 but either way it has been great playing around with it and doing my research to see if I could find out on my own. It's hard to tell you to go out and get one because I'm not sure what to go out and get at this point or even if this version can still be purchased and if so where from? All these questions... I can tell you that it's great to finally have an actual NAME REMOVED replica in my collection, I have a few NAME REMOVED-like guns but until I got my hand on this Mystery NAME REMOVED 17 GBB Airsoft pistol I really only had close proximities. So if you have the opportunity to snatch up something like this I say go for it!
Photo of Mystery KSC Removed by Request from Glock "Renzulli Law Firm"
Watch my YouTube Full Video Review of this Mystery NAME REMOVED 17 Airsoft Pistol:
I already posted that I recently hit 10,000,00 YouTube video Views but I have been hinting about there being another Giveaway/Contest. After much thought I wanted to have a way that more than just one person could benefit from this. So I decided to list a bunch of my Canada Store products on sale. (Sorry US customers but I have a lot more restrictions in the US when it comes to what I can do with my pricing).
These Canadian sales will be in effect from now until October 10th and to make things even better, one lucky shopper during this time will get their entire order for free (This includes US Customers too).
So make sure to get in on the savings and the chance to get your order free!
In this "Update Video" I also show off some new previously owned guns added to my collection, an Airsoft ASG shell ejecting CZ 75, a no-name KSC Airsoft shooter and a Gamo Combat .177 caliber pellet revolver. And if you're into spring piston break barrel pistols, make sure to watch for my customized Exisco XSP180 .177 caliber Verminator!
Ten Million Video Views Giveaway Plus CZ 75 - Glock Airsoft - Gamo Combat Pellet Revolver
Here is a sample of some of the items on sale right now...
We made it! I hit 10,000,00 YouTube Channel video views over the weekend and I'm really excited about it!
Thanks again to all of my loyal followers who spend many hours watching my videos :) Without you this huge accomplishment would never have happened!
I will be posting a YouTube video that will go over how I am going to celebrate my Ten Millionth YouTube Video View and how that will benefit you my fans and customers so keep posted...
I managed to grab few more Black Kimar - Crosman CK92's for the Canada Store, so if you missed out when I had these a while back make sure to grab one before they're gone again. This may just be the last time you will be able to buy a direct from the Kimar factory refurbished CK92 Beretta styled all metal classic pellet pistol!
Just thought you'd like to know we've added the classic Daisy 1938 Red Ryder BB Rifle to the Canadian Replica Airguns Store.
The legendary Red Ryder! Who hasn't wanted one of these? Daisy's 1938 Red Ryder model is still a favorite of boys and girls (and men and women). Suitable for shooters 10 and older (with adult supervision), this lever-action spring rifle is lightweight, easy to cock and durable. The solid wood forearm and engraved wood stock are just the right length for young shooters.
With a capacity of 650 BBs (Never shoot BBs at hard objects!), you'll be shooting all day long! The rifle comes with a blade and ramp front sight and an adjustable open rear sight. It has a stamped metal receiver.
Christmas Story Red Ryder. Ralphie was enjoying his BB gun, should your kids or grandkids enjoy it too? Experience the Christmas Story at home!
Sorry for not posting any videos for almost a week but the kids are back to school and I was also away in Whistler on a short family get away for the first half of the week. So I thought I would put together a quick Update video to show off some new products added to the Canada Replica Airguns Store and also an upcoming product review of a Crosman Pellet Revolver.
In this video Update I show you around two KWC Airsoft pistols, the Sig Pro SP2022, and the Taurus PT 24 (24/7), both of which I just added to the Canada Replica Airguns Store. I also show you a very nice alternative to the Cybergun Sig Sauer P226 X-Five - the KWC Equivalent which almost exactly the same but with an adjustable rear sight, flared magwell and an unlicensed slide.
One air pistol I get asked to review over and over again is the Crosman 357 .177 caliber pellet revolver and so I contacted Crosman and they where kind enough to send me one for review, so keep checking back for that one, it will be coming up soon.
Oh-yh, one more thing. I briefly mention an upcoming contest/giveaway that will coincide with my 10,000,000 YouTube Channel Video View that should be happening in the next couple of week!
Another nice example of a lower cost Airsoft gun from KWC, this KWC (Taurus PT24) 24/7 in 6mm Airsoft is very similar in construction to the KWC SP2022 with an all metal slide and full size drop out magazine. The 24/7 has a nice smooth double action trigger and comes with rubberized grips.
This is a KWC distributed Airsoft pistol, this non licenced version is a very detailed replica of the real steel Taurus PT24. The KWC 24/7 features a metal slide and full size drop out all metal magazine giving this Airsoft pistol even more realism! It has a nice light double action trigger and working magazine release and safety.
I have been selling the Cybergun 4.5mm Steel BB version of this fine Sig Sauer copy for some time now (that is when I have it in stock) The KWC Sig Suer SP2022 is pretty much the exact same gun but chambered in 6mm Airsoft and without andy licensing or branding on the metal slide. It really is a very nice low cost Airsoft gun with full metal drop free magazine and metal slide.
This is a KWC distributed Airsoft pistol, this non licenced Sig Sauer SP2022 is a very detailed replica of the real steel Sig Sauer SP2022 Sig Pro used by the DEA and many other law enforcement agencies worldwide. The KWC Sig Sauer SP2022 features a metal slide and full size drop out all metal magazine giving this Airsoft pistol even more realism! It has a very light double action trigger and working magazine release and safety.
I have been selling the Cybergun Sig Sauer P226 X-Five in both the Standard and Open versions for some time now but it can be hard keeping them in stock as they are very popular. I just added another option of the same gun but in the KWC configuration, the KWC version is similar to the Cybergun Standard model but with adjustable sights and a flared magwell similar to the Cybergun Open version. Magazines and parts are all interchangeable.
The Cybergun Sig Sauer P226 X Five is a CO2 powered 4.5mm all metal BB pistol. This detailed BB shooter is a replica of the real Sig Sauer P226 X Five and features a full size drop out metal magazine that holds both the 4.5mm BB's and the CO2 cartridge. It features a working slide with realistic blowback operation and can be fully field stripped just like the actual sidearm.
Your choice of Cybergun Standard or Open Version or KWC Adjustable Sights - click appropriate option.