I've this one in the US Store for some time and thought it was time to bring it to the Canada Store.
The Walther PPQ CO2 Pistol is a pellet/ BB repeater powered by one 12g CO2 cylinder that hides in the grip of the BB pistol. An integrated accessory rail underneath the muzzle is a great place to add a tactical flashlight or an airgun laser.The Walther PPQ CO2 pistol has a manual slide lever safety, single action trigger, and a fixed blade front sight and an adjustable rear sight. This BB replica is not only a great BB gun for some fun plinking, but also makes a great target shooting and training pistol.
We've had the all black version so why not add the Nickel Slide PPK/S too!
Enjoy the excitement of the Umarex Walther PPK/S, one of the world's most famous pistols made infamous by the popular James Bond 007 movies. Fire 15 steel 4.5mm BB's as fast as you can pull the trigger with its ultra realistic blowback recoil. This air pistol has a heavyweight steel construction with an authentic look and feel you will surly enjoy!
Action: Blowback, Single action only on KP-07 - Single/Double action on KP-02 & Elite 1A
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 20/22/20 rounds.
FPS: 366+ fps.
Trigger Pull: The trigger pull on all of these KJWorks Airsoft guns is very nice in both single and double action, The KP-07's true single action only 1911 trigger is a beauty, with no take up at all and a very light and smooth release. The Beretta Elite 1A is the next best with a surprisingly light weight double action trigger. All of these guns will be shooting primarily in single action as the blowback precooks the hammer with each shot.
Accuracy: I shot all of these fine KJWorks Airsoft guns from 20 feet out in semi rested position and got very similar results. I was able to place 10 rounds in a 2 to 2.5 inch grouping for all guns, with the KP-07 1911 shooting the most well centered. The Beretta Elite 1A shot well centered also but just a hair under center mass while the KP-02 seemed to shoot low but could be adjusted to shoot higher by increasing the hopup. All three KJWorks Airsoft pistols got right around the 330-350 fps mark (5 shot average chrony testing) with the KP-7 1911 and Elite 1A Beretta hitting the higher end and the KP-02 Sig P229 getting right around 330fps. All three KJWorks Blowback Airsoft guns should be able to hit 366+fps in the right shooting conditions.
Build Quality: I was extremely impressed with the build quality of these KJWorks Airsoft guns, the fit and finish is the best I have seen on any of my guns including Airguns also. Even after shooting several magazines worth of BB's, the painted metal friction areas did not seem to show nearly as much wear as some of my other blowback guns. The tolerances between the moving parts like the slide and frame are very tight showing excellent workmanship and machining with these KJWorks Airsoft guns.
Realism: All of these KJWorks 6mm Airsoft pistols are based on real steal versions of the same guns (KP-02 is a Sig Sauer P229 copy, the KP-07 is a Colt 1911 copy and the Elite 1A is a Beretta Copy). They are very good replicas even though the KP-02 and KP-07 do not have any specific licensing on them. The Elite 1A does have licensing which is a plus. The only negative thing I can think of is the fact that the KP-02 has the rather unusual CO2 magazine that sticks out of the bottom of the handle that is not at all like a real P229 magazine. I do believe you can find a GBB magazine that would be much more in line with the real steel version of this magazine.
All metal guns with good overall realistic weights.
Very heavy blowback on all guns, especially the KP-07 1911
Excellent fit and finish - best I have seen.
Nice mid range fps - great for on the field.
Very consistent accuracy for all KJWorks Airsoft guns.
Very believable replicas of the real steel versions.
Cons:
KP-2 and KP-07 did not have official licensing.
All seem to go through CO2/Gas fairly fast.
KP-02 had a rather strange looking CO2 magazine.
KP-02 slide did not lock back after last shot, may be due to CO2 magazine configuration.
Comments:
I guess you get what you pay for, these KJWorks Airsoft guns do fetch a bit higher price but when you take them out of the box and really look at them closely you can see why, they are pretty much flawless and the fit and tolerances are very good with very little play in the mechanical parts. Shooting these guns is just as wonderful, they all worked very well and got consistent accuracy and fps between shots. There where no ammo loading problems and no unexpected behaviors with any of these Airsoft pistols. If you can afford to pay that little bit more for one of these very high quality KJWorks Blowback Airsoft guns, you will not be let down!
My first Airgun Silent Auction! I came into some used Airguns as part of an "Airgun - Blank Gun" package and since I already had these models I did not need them for my personal collection so I'm putting them up as a Three Airgun Silent Auction package.
These three Airguns are all made by Umarex and use 12 gram CO2 cartridges, the MP5K PDW shoots 4.5mm steel BB's and has blowback operation. The Beretta Elite II loads 4.5mm steel BB's into it's all metal drop out magazine and is know for it's very good combination of high FPS and accuracy. The CPSport uses a rotary 8 round magazine that hold 8 lead pellets, it has a full size drop out magazine that holds the CO2 making it very realistic and also easy to load CO2.
In order to won these fine Umarex Preowned Airguns, you will need to send in your highest bid to mike@replicaairguns.com before August 27th midnight. At the conclusion of this Silent Auction I will notify the winner. This Airgun Silent Auction is open to both my Canada and US customers, Canadian Customers will pay an additional $17.99 for Shipping/Handling plus their local provincial sales Tax. US Customers will pay $29.99 International Canada to US Shipping & Handling but will not pay any sales tax.
Of course you can also buy these guns new in my Canada & US Replica Airguns Stores
Here is a short video update along with a few photos of my KWC and Umarex Airsoft Pistols recently added to the Canada Replica Airguns Store. The models showcased are the KWC M1911 & KWC M92 (PT99) along with the Umarex Walther P99. All of these pistols use 6mm plastic Airsoft BB's, shoot over 366 fps using CO2 and have blowback operation.
Watch my Vimeo Update Video on these three Blowback Airsoft Pistols:
Last but not least for now, just added to the Canada Replica Airguns Store - the KWC M92 (PT99) CO2 Blowback Airsoft Pistol.
The KWC M92 (PT99) is essentially is the Airsoft KWC version of the Cybergun GSG 92 without any branding and also in 6mm Airsoft caliber. And it comes already to shoot in either semi or full auto so no modifications required!
The KWC M92 PT99 features a full size drop out metal magazine that holds both the 6mm Plastic Airsoft BB's and the CO2 cartridge. It features a working slide with realistic blowback operation and can be fully field stripped just like the actual sidearm.
The KWC M1911 is essentially is the Airsoft KWC version of the Cybergun Tanfoglio Witness 1911 without any branding and also in 6mm Airsoft caliber.
The KWC M1911 features a full size drop out metal magazine that holds both the 6mm Plastic Airsoft BB's and the CO2 cartridge. It features a working slide with realistic blowback operation and can be fully field stripped just like the actual 1911 sidearm.
The Umarex Walther P99, one of Walther's most popular semi auto pistols. This CO2 powered Airsoft version captures the realism with its BLOWBACK, semi-automatic action and full metal slide.
A 12g CO2 cylinder loads in the back of the grip and the Airsoft BB magazine releases with the push of a realistic magazine release lever. The recoil action made live by the power of CO2 kicks the slide back giving you that oh-so-realistic feel. A great pistol for Target, Airsoft Games and owners of the P99 or similar firearms.
6mm Airsoft Plastic BB's
CO2 Powered
15 round drop out metal magazine
Up to 380 fps
1.5 pounds
7.25 inch length
Double action only
Blowback
Metal slide - polymer frame
Tactical Rail Mount
Fully Licensed
Comes with red tip (Can be removed with a bit of work ;)
Trigger Pull: The trigger pull for both KWC blowback single action pistols is very good, the Desert Eagle is a bit better with less play and a lighter pull while the Sigma SW40F still feels very good but has a little bit more take up and a slight bit more pull required.
Accuracy: I shot both guns from 20 feet out in semi rested position and got similar results. I was able to place 10 rounds in a 2.5 to 3 inch group and both guns shot well centered. I have full confidence that I could easily hit a man sized target from 50 feet away. Both KWC Airsoft pistols got right around 400 fps (5 shot average chrony testing) with the Desert Eagle only 10 fps higher than the Sigma SW40F and this was using .20 gram plastic Airsoft BB's.
Build Quality: The build quality for both guns is pretty much the same, both have a metal slide and barrel with a polymer frame and plastic grips, the Sigma SW40F had a plastic magazine release and trigger while the Desert Eagle used metal in these parts. The KWC Sigma SW40F seemed to wear a bit better as the painted finish seemed more durable. I found the metal on metal areas on the Desert Eagle where losing the paint and also in some of the high spots. Over all the guns worked very well and had good fit and finish.
Realism: The KWC Desert Eagle .50 and Sigma SW40F are very accurate replicas of their real steel counterparts, with the Desert Eagle also having the full licensing on it for added authenticity. The workings of both Airsoft guns are pretty much just like a real gun with full size drop out magazines and very heavy full blowback operation. The slides on each gun give a nice metallic sound when operating.
Very believable replicas of the real steel versions.
Cons:
Paint wear in high spots noticeable on the Desert Eagle.
Non adjustable sights.
Both go through CO2 fast.
No trademarks on the Sigma SW40F.
Comments:
It's wonderful to get these KWC blowback Airsoft guns here in Canada finally and have the ability to review them for everyone. They remind me a lot of the Cybergun 4.5mm Steel BB blowback pistols very much and this is probably because there are Airsoft version of these guns also distributed by KWC. Whether you want one of these very nice Airsoft pistols for plinking and target practice or to use in battle on the Airsoft field, either gun would make a great choice. I am really loving the fact that I now have more guns I can review and Airsoft or 4.5mm Steel BB it really doesn't matter to me, I'm having way to much fun to care ;)
The Browning Buck Mark URX has a single stroke super easy cocking mechanism with break barrel action. This pistol shoots 320 FPS and has an automatic safety. The ergonomic ambidextrous grip help the user to feel comfortable while shooting this lightweight pistol. If you own the 22LR version this is a for sure purcahse as it is a dead ringer and will make a great off range practice gun.
Just added to the Canada Replica Airguns Store - Schrade Professionals Double Lock Handcuffs! Founded by Stewart Taylor in 1975, Taylor Brands has been manufacturing, designing and distributing high-quality stainless steel knives and accessories since its inception.
Taylor Brands manufactures Schrade Cutlery such as Old Timer, Uncle Henry, Schrade Tuff, and X-timer. They have recently introduced a high quality line of Schrade flashlight, scissors, and shears.
Taylor Brands also manufactures Smith & Wesson Cutlery such as S.W.A.T., Extreme Ops, Homeland Security, Search & Rescue, and H.R.T. Taylor Brands is also renowned for their specialty items and custom designed pieces such as the Texas Ranger Commemorative Knives celebrating the 180th Anniversary of Texas Rangers
Outdoor enthusiasts, hunters and, most recently, law enforcement and fire safety professionals utilize Taylor Brands products.
Last update for the day, I am happy to announce that I have added two Gas Blowback Airsoft Rifles from WE to the Canada Replica Airguns Store. They are both fantastic guns that are the spitting image of their real steel counterparts and both have awesome blowback action and feel. Both rifles shoot in semi and full auto which is exhilarating!
Some more asked for blowback Airsoft pistols just added to the Canada Replica Airguns Store, these three are from KJWORKS and are very high quality for sure with excellent fit and finish on them!
I have had a few Umarex Magazines but not as many as I would like to, now you can get some more popular Umarex Magazines for the following Umarex airguns:
CP99 Compact
PPK/S
CP88 - 8 Shot Rotary
CP99 - 8 Shot Rotary
CPSport - 8 Shot Rotary
Beretta M 92FS - 8 Shot Rotary
Colt 1911 A1 - 8 Shot Rotary
H&K P30 - 8 Shot Rotary
PPQ - 8 Shot Rotary
S&W M&P 45 - 8 Shot Rotary
Walther Lever Action Rifle - 8 Shot Rotary
You can get these Umarex Magazines in the Canada Store > Accessories > Air Guns > Magazines Section. Or click here!
It's about time! I have been holding out for some Zinc coated BB's as they are my ammo of choice, I feel they keep your gun a lot cleaner as the copper coated BB's can tend to leave a dusty rust colored residue behind.
You can get the Daisy Zinc Coated BB's in either 4000 or 6000 count bottles located in the Canada Store > Accessories > Air Guns > Ammo Section. Or click here!
I am super happy to announce a bunch of new Canada Store Products coming very soon. I have sourced out some Blowback Airsoft pistols and also a couple of GBB We Airsoft Rifles. (KJWorks: Elite 1A, KP-07, KP-02) (KWC: DE .50, SW40F) (RAM P99) (WE: G39C, M4 CQBR).
I am also adding some airgun pistols that I have not been able to find a supplier for here in Canada up until now, and I will also be adding them to the Canada Store shortly. (Umarex: Browning Buck Mark URX, XBG, Beretta 90two).
And of course the addition of some new accessories that I have been wanting to have listed in the Canada Store for some time now. (Daisy Zinc Coated BB's, Umarex CP99 - PPK - Rotary Magazines, Body Guard Mace Spray, Schrade Hand Cuffs)
So if your interested in any of these items then keep checking back, I will be adding them to the Canada Store as quick as I can - time permitting!
After what has been a very long absence of any new Blank (Flare Guns) in the Replica Airguns Canada Store, I managed to find a supplier for some very high quality German made .22 caliber compact revolvers. These two ROHM (RÖHM) blank revolvers are almost all metal with the exception of the grips and for their size are very hefty. The ROHM Le Petit RG-56 and Little Joe both come in a nice gift box with the manual and cleaning rod while the larger RG-56 also included a flare adaptor.
RÖHM Le Petit RG-56 .22 Blank Revolver:
The RÖHM Le Petit RG-56 22 Blank Revolver is a very high quality German made almost all metal blank gun that uses affordable .22 caliber acorn blanks. It is very compact, front firing and has an 7 shot cylinder. The RG-56 comes presented in a gift box with a manual, flare adaptor and cleaning rod.
Mostly metal construction
German made
.22 caliber acorn style blanks
7 shot capacity
Single & double action
Hefty 472 grams - 1 pound
Flare adaptor included
Cleaning rod included
Comes in a gift box
RÖHM Little Joe Ultra Compact .22 Blank Revolver:
The RÖHM Little Joe Ultra Compact .22 Blank Revolver is a very high quality German made almost all metal super compact blank gun that uses affordable .22 caliber acorn blanks. It is ultra compact, front firing and has a 5 shot cylinder. The RÖHM Little Joe comes presented in a gift box with a manual and cleaning rod.
I have had a lot of people ask to buy my Russian made ZMZ Tyrex PPA-K-01 4.5mm BB Machine Gun and offer a lot of money for it and I have turned them all down, some may say I am crazy but the people offering the big bucks understand how rare this gun is here in North America and will pay what it takes to own one.
I was approached by the seller that I originally purchased my ZMZ Tyrex PPA-K-01 from and he informed me that he has two brand new in the box units he has acquired and is willing to sell. So for those of you who wanted to buy mine from me, now is your chance to get one!
He is asking $850, "this is not a misprint", they are not cheap, they are a rare collectors item, if you can find one for less money then grab it quick.
Interested parties can send me an email and I will forward your information to the seller. You can work out the details with him. Good luck!
