As the title suggest this a video about a Huge Mystery Box so I am not going to say what’s in it, I can say that their are 4 main products mostly rifles per-say. One is a Futuristic Full Auto BB Rifle, one is a Paintball Shotgun, One is an AEG Airsoft Rifle and one is a Replica Break Barrel Pellet Rifle.
So I have a lot of variety here to show everyone! I did absolutely zero research on any of the products I show in this video since like you I had no real idea what was inside other than how many and that most where rifle based.
Enjoy finding out what new products I will be reviewing over the next month with dedicated Table Top and Field Test Shooting videos.
I sometimes mention in my review videos that a gun is either Full Blowback or Partial Blowback and some people may not understand exactly what this means and how it effects the Airguns Blowback Action and Performance so I figured it would be best to make a dedicated video talking about the differences and also some of the Pro’s and Con’s of each type of Blowback Action.
In the video I obviously go into a fair amount of detail and show you around each type of Airgun and Magazine as they do differ a fair amount but to summaries for you here in this written form, the main difference is going to be how much the slide moves back and forth. With Full Blowback Airguns the slide will move much longer back and forth on the frame of the Airgun much like a real gun does and the slide Catch/Lock generally locks back further too. With a Partial Blowback Airgun the slide generally has a shorter range of movement back and forth on the frame with the slide locks usually about half of the distance compared to a Full Blowback Airgun.
The magazines are also very different as a Full Blowbacks Airgun generally has a partially exposed BB which is pushed into the barrel by the nozzle with each slide cycle. With a Partial Blowback Airgun the BB is generally not exposed and either the trigger action or simply the CO2 force is required to transfer the BB in the breach of the Airgun.
Another point to mention is that Full Blowback Airguns tend to use more CO2 and have a slightly lower velocity as compared to Partial Blowback Airguns but this is not a rule.
There are many types of magazines used in Airguns and some of this is dependent on the ammunition used.
For instance a stacked type of magazine often used for Steel BB and Airsoft can not be used for Pellets as pellets tend to deform when stacked in such a way since there is no metal casting protecting them from mashing into each other.
So what type of magazines do we generally see in Airguns? The most common Airgun magazines are as follows:
Simple Stick Magazine
Mostly used with Steel BB but also found in some Airsoft Airguns.
Some Pellet Airguns use a type of stick magazine with a rotary magazine on each end.
Used in non-blowback and blowback Airguns.
Can be made from plastic or steel or a combination of both materials.
Full Size Drop Out Magazine
Used with Steel BB and Airsoft guns.
Generally you will find these types magazines hold both the BB’s and CO2.
Used in non-blowback and blowback Airguns.
Commonly used with Airsoft Rifles in mid to high capacity.
Can be made from plastic or steel or a combination of both materials.
Rotary magazine
Used with Steel BB, Airsoft and Pellet Airguns.
Used in non-blowback and blowback Airguns.
Can be made from plastic or steel.
Can often use mixed ammo types as in both 4.5mm Steel BB and .177 caliber pellet.
Belt Fed Magazine
Like rotary magazine belt fed magazine can accommodate Steel BB, Pellet and Airsoft but are most often used with Pellet Airguns.
Usually found in a full size magazine that also holds the CO2.
Used in non-blowback and blowback Airguns.
Can be made from plastic or steel or a combination of both materials.
Internal Magazine
Used with Steel BB, Airsoft.
Can have a hopper built in hat feeds a spring fed magazine.
Usually found in lesser expensive Airguns but not a rule.
In this Video I go through each type of Airgun Magazine and talk about their differences and uses.
I have another Full Auto Fun Video this one focusing on 4.5mm Steel BB Versus 6mm Plastic and which one is better in terms of accuracy and shredding power. I perform this super scientific test by shooting obviously in full auto two comparable Steel BB and Plastic Airsoft Rifles at a paper target setup 20 feet away with a magazine as a backer so I can see what the accuracy is like and how much of the paper magazine gets shredded by each ammo being tested.
I have split this video into three separate videos, in video one I compare two similar AR styled rifles, a CO2 powered Blowback 4.5mm BB Rifle to a Gas Blowback 6mm Airsoft Rifle. In video two I compare two AK type Blowback Rifles to each otters, again a CO2 4.5mm Steel BB along with a Gas 6mm Airsoft.
And lastly in Video three I compare my top picks for each category which include a non-Blowback CO2 4.5mm BB Machine gun to an AEG 6mm Airsoft Rifle.
I have another Full Auto Fun Video this one focusing on 4.5mm Steel BB Versus 6mm Plastic and which one is better in terms of accuracy and shredding power. I perform this super scientific test by shooting obviously in full auto two comparable Steel BB and Plastic Airsoft Rifles at a paper target setup 20 feet away with a magazine as a backer so I can see what the accuracy is like and how much of the paper magazine gets shredded by each ammo being tested.
I have split this video into three separate videos, in video one I compare two similar AR styled rifles, a CO2 powered Blowback 4.5mm BB Rifle to a Gas Blowback 6mm Airsoft Rifle. In video two I compare two AK type Blowback Rifles to each otters, again a CO2 4.5mm Steel BB along with a Gas 6mm Airsoft.
And lastly in Video three I compare my top picks for each category which include a non-Blowback CO2 4.5mm BB Machine gun to an AEG 6mm Airsoft Rifle.
For this Video 2 Accuracy Test I shoot all of the above listed Airguns at a paper target setup 30 feet down range using a semi rested shooting position with my hands resting on a sand bag up front and seated on a stool in the back. It’s not perfect but works well enough. I didn’t take a ton of time with each gun since there where 4 to shoot in this Field Test Shooting Video so accuracy may have been a bit better if I took a little more time with each gun.
In Video 2 I test the power and penetration of each Airgun option shooting at a pop can, a soup can and a toilet paper roll so make sure to watch that video if you have not already watched it.
For this Video 1 Power Test I shoot all of the above listed Airguns first at a pop can, then a soup can and then a toilet paper roll. The ides is to test penetration abilities with the pop and soup can and then raw force shooting the toilet paper as it will absorb all the energy from each airgun round and by gauging how much the toilet paper reacts or moves it should tell us which airgun has the most raw power or energy.
In Video 2 I will be testing accuracy using my standard 30 round paper target setup in the Replica Airguns Sea Can so stay posted for that upcoming video shortly…
This is Video 2 of the Full Auto Fun 2022 video series where I shoot my Crosman AK1 Duel CO2 Full Auto BB Machine Gun at some water filled cans and a paper gel target just for some good old fun times! In Video 1 which is already posted, I tested out the Crosman A4-P Duel CO2 Full Auto BB Gun. And in Video 3 which I have not posted yet I will be shooting the Air Ordnance SMG .22 which is a PCP powered Full Auto .22 Caliber Pellet Machine Gun to finish this 2022 Full Auto Fun Series off.
In this years 2022 Full Auto Fun Video series I take three Full auto Airguns outside in the yard and have some fun with them shooting at water filled cans and a gel target. I picked two Full Auto CO2 4.5mm Steel BB Guns from Crosman, the A4-P AR-15 Pistol and the AK1 Rifle which is a modernized AK 47. The Crosman A4-P representing my most compact entry with the Crosman AK1 representing my mid size entry even though it is fairly large. I end this series with the Air Ordnance SMG .22 which is a PCP powered Full Auto .22 Caliber Pellet Machine Gun and yes this represents my large or at least most powerful choice for this years 2022 Full Auto Fun Video.
In this video, (Video 1 of the series) I have some Full Auto Fun with the Crosman A4-P, watch and enjoy along with me as I place 100 rounds down range ripping up some water filled cans and putting holes in my gel target.
Type:Airsoft Rifle. Manufacturer: Tokyo Marui. Model:CQBR Block1. Materials: Metal and Polymer. Weight: 9.97 pounds (4.52kg). Barrel: 9.84 inches (250mm). Propulsion: Gas Blowback. Action: Semi & Full Auto - SAO trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 35 Max FPS: 350 Tested (.20 gram).
Trigger Pull: The trigger on the Tokyo Marui CQBR Block1 GBB Airsoft Rifle is single action only so the charging handle will need to be engaged on your first shot un less the bolt is already back for a preview empty magazine and reload. The trigger is light and short with virtual no makeup but then just a bit of creep before releasing the internal striker and firing a round.
Accuracy: I did already perform my Field Test Shooting Video for the Tokyo Marui CQBR Block1 GBB Airsoft Rifle so I do have some information to share relating to the shooting abilities of this Gas Blowback Airsoft Rifle. During my Velocity Chronograph Test I was able to average 332 fps using .20 gram Airsfot BB’s with my highest velocity shot hitting 350 fps. My 10 shot grouping at 30 feet away yielded a 1.5 inch spread and when I placed the Tokyo Marui CQBR Block1 GBB Airsoft Rifle in full auto it did open up a fair amount since the blowback action really rocks this gun around a lot making full auto shooting spread out much monroe than semi auto shooting but still so much fun to shoot in full auto :). You can watch my full Field Test Shooting Video here!
Build Quality: The build quality of the Tokyo Marui CQBR Block1 GBB Airsoft Rifle is one of the highest out there with high quality metal parts throughout this GBB AIrsfot Rifle both inside and out. Some of the internals include a heavy duty 19mm blowback piston, New mechanism Z-system to prevent wear and tear of bolt catch, piston absorber and friction relief bolt roller to reduce the burden on internal parts due to bolt operation.
Realism: The Tokyo Marui CQBR Block1 GBB Airsoft Rifle is a near perfect replica of a Colt licensed AR 15 and Tokyo Marui has a ton of detail to the fit and finish including the unique and multiple finishes on the external parts: The rail hand guard, front sight, and stock reproduce the difference in FDE color tone applied to each part as in the real thing. The metal rail hand guard reproduces the color by alumite treatment with excellent scratch resistance. In addition, the upper / lower frame and bolts are made of Ceracoat, which has a strong coating film and excellent scratch resistance.
Pros:
Super high quality GBB Airsoft Rifle.
Bolt locks back for easy hop-up adjustments.
Very heavy blowback operation.
Lots of metal parts, mostly everything except the stock, fore grip and pistol grip.
Lots of mounting points with it’s quad rail setup.
Awesome internals: Heavy duty 19mm blowback piston, New mechanism Z-system to prevent wear and tear of bolt catch, piston absorber and friction relief bolt roller to reduce the burden on internal parts due to bolt operation.
Attention to detail goes beyond expectation! Color reproduction and special surface treatment is a good example of this.
Easy to mount a sling with it’s QD tactical sling mounts on handguard, lower receiver, and stock.
Adjustable hop-up as expected.
6 portion rear stock.
Removable and fully adjustable rear sight.
Great for close and mid range shooting situations with a 350 average fps using .20 gram BB’s.
Accuracy was good at 30 feet getting around a 1.5 inch 10 shot grouping.
Cons:
My magazine did not seem to seal very well in the nozzle area when filling with propane but mag seemed to fill OK, just seemed to waste a bit of gas while filling.
Heavy blowback makes full auto accuracy move around a fair amount.
Pretty much have sue the included magazine filling tube to load BB’s in the magazine sop will need ot be carried with you in a game.
On the very high end of the price spectrum.
Comments: I am a bit of a sucker for Blowback Airguns in general whether it be Pistol, Rifle, BB, Pellet, Paintball or Airsoft. So right out of the box I loved the Tokyo Marui CQBR Block1 GBB Airsoft Rifle with its heavy blowback recoil. All that aside the Tokyo Marui CQBR Block1 GBB Airsoft Rifle is one of the highest quality Gas Blowback AR 15 type Airsoft Rifles you will be able to get your hands on assuming if you can find it in stock. It is a near perfect Airsoft Replica of a real steel Colt AR with only the best finishes and parts available for such a GBB Rifle.
Starting with my velocity test, I placed 6 rounds through my Chronpgrah using .20 gram Airsoft BB’s with a fully gassed up magazine. The slowest shot was 332 fps while the fastest shot was 350 fps for a 6 shot average of 337 fps, the temperature was not overly warm in the Sea Can for this Field Test so I would imagine in a warmer shooting conditions the velocity would be a little bit higher.
Switch to my Accuracy test for the Tokyo Marui CQBR Block1 GBB Airsoft Rifle I set myself up using a rested seated shooting position with a sand bag up front for stability. My fresh paper target was 30 feet down range for this test. I was able to place 10 rounds in semi auto all within about 1.5 inches slightly high on the target but well centered left to right. This is just using out of the box already setup hop-up and sight adjustments. I then shot the remaining 25 rounds left in the magazine using several full auto bursts until the magazine was empty and as expected the grouping opened up more since this Gas Blowback Airsoft Rifle really does have some kick and does move around a fair bit.
I really enjoyed testing out the Tokyo Marui CQBR Block1 GBB Airsoft Rifle in the Replcai Airguns Sea Can Indoor Airgun Shooting Range. It performed exactly how I was hoping with mid range velocity and excellent accuracy in semi auto. If you are looking for one of the more realistic and higher quality GBB Airsoft AR-15 type Airsoft Rifles on the market you really can not go wrong with the Tokyo Marui CQBR Block1 GBB Airsoft Rifle as it checks all these boxes!
In this Preview Unboxing Video I take a look at three rifles, two are Airsoft Rifles and one is an Archery Rifle. Then First Airsoft Rifle form Tokyo Marui i s full Gas Blowback all metal build AR 15 of the highest quality and realism while the second Airsoft Rifle from Sig Sauer is an AEG but again a high quality product for sure. Lastly I take a look at Umarex’s lates Airsaber which now sports dual Arrow configuration for quick follow up shots. I do plan to make future more intensive table top and shooting videos for some if not all of thees Rifles but this video will at least wet your appetite a bit.
In this Field Test Review Shooting Video I take the G&G Piranha SL GBB Airsoft Pistol through its paces to find out what we can expect in terms of velocity and accuracy. I perform two main tests, the Chronograph Test where I shoot around 5 rounds and average them out to see what the real world fps is and then I shoot 10 rounds at a paper taggert setup 30 feet downrange to see how tight of a grouping I can achieve with the G&G Piranha SL GBB Airsoft Pistol. I don’t talk much about the specifications and details in this video so if you are interested in that information you can watch my Table Top Video for this Airsoft Pistol here.
Starting first with the Chronograph Velocity Test I loaded .20 gram Airsoft BB’s into both of the supplied magazines and filled them up with propane gas. Often times because the valves may be tuned just a bit differently, you can expect each magazine to shoot a slightly different velocities or fps. This was the case with the G&G Piranha SL GBB Airsoft Pistol as the shorter double stack 25 round magazine averaged 353 fps while the longer single stack 20 round magazine shot a 328 average fps. So 25 fps difference between the two.
Moving on to the accuracy portion of the test I was able to get close to a two inch grouping fairly well centered shooting at a fresh paper target setup 30 feet away from a rested shooting position with my hands on a sand bag up front and sitting in the back. I was having some problems with the shorter double stack 25 round magazine not chambering rounds consistently which meant I had to reset my shooting position many times but even so I was able to get close to a two inch grouping. I did load up a different 25 round magazine from another Piranha Airsoft Pistol I had around and this magazine shot perfectly without any chambering problems so there must be something not exactly right with the short magazine that came with my G&G Piranha SL.
Other than the feeding issue I had for the double stack 25 round short magazine that came with my G&G Piranha SL GBB Airsoft Pistol, the Airsoft gun performed well. It for sure made for an entertaining video spraying Airsoft BB’s all over the Sea Can and trying o figure out why the Airsoft Pisotl was not working as it should. Such is life and at the end of the day it was simply something going on with the one magazine which seemed ot have a problem releasing the Airsoft BB’s into the gas chamber. All that was needed was a new magazine and we where back in business!
In this Field Test Shooting Video I test out the KJWorks CZ P-09 GBB Airsoft Pistol in the Replica Airguns Indoor Sea Can Shooting Range to find out what the velocity and accuracy is using .20 gram Airsoft BB’s. If you’re more interested in details, specifications and close up video of the KJWorks CZ P-09 GBB Airsoft Pistol then make sure to watch my Table Top Video for that information.
Starting with the velocity test I averaged out 6 rounds using my chronograph to find out the fps velocity for the KJWorks CZ P-09 GBB Airsoft Pistol and I was able to get 279.5 fps, the slowest of the 6 shots was 279 with the fastest being 281 so actually fairly closer to each other. I do mention at the end of the video that it felt like the velocity was not consistent because the blowback action to me felt like it was heavier on some shots than others? I felt like this might effect accuracy in terms of elevations if the velocity was not consistent but it ended up not being a factor as far as I could tell.
For my accuracy test I loaded 10 rounds in the KJWorks CZ P-09 GBB Airsoft Pistol and proceeded to place them to the best of my ability into my paper target setup 30 feet down range using a rested and seated shooting position (Sand bag up front, seated on a stool in the back). Even though the grouping spread out to about 4 inches, all but one round stayed within about 2 inches and side to side the spread was closer to about 1.5 inches for all shots. In terms of placement on the target they where all fairly well centered out of the box.
The fps for the KJWorks CZ P-09 GBB Airsoft Pistol is a bit low using the preinstalled short internal barrel that does not allow for the added threaded barrel extension but you could install the short internal threaded barrel and add the external barrel extension to increase the fps to more in the range of 360+. That said you would have a fairly long brass inner barrel protruding from your gun with no way I can see to install a mock suppressor to hide it so it would not look so good this way and there is also the possibility of damaging the thin exposed external barrel. Overall the KJWorks CZ P-09 GBB Airsoft Pistol performed well but I feel needs a little bit of break in time to smooth out the blowback consistency but even as is it shot consistent fps and was able to get most rounds well placed on the center of the target.
Type: Gas Blowback Airsoft Pistol. Manufacturer: KJWorks Model: CZ P-09 Materials: Metal & Polymer. Weight: 2.3 pounds (1050 grams). Length: 9 inches (229mm) total. Barrel: 4.4 inches (120mm),Metal non-rifled smooth bore. (Comes with barrel extension) Propulsion: Green gas or propane. Action: Blowback, single and double action. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 25rounds. FPS: 376 fps.
Trigger Pull: The trigger pull on the KJWorks CZ P-09 GBB Airsoft Pistol is good in both single and double action shooting modes. Most of the time you will be shooting in single action as the blowback action will do all the work cycling the slide and retracting the hammer allowing for light quick single action follow up shots. If you do decide to drop the hammer in-between shooting you can then pull the double action trigger which is much longer and a bit heavier but this will draw the hammer back and release the trigger as expected with single action shots to follow.
Accuracy: So far I have not made my Field Test Shooting Video for the KJWorks CZ P-09 GBB Airsoft Pistol but do expect it to behave much like the ASG distributed version of this same gun which by the way is also made by KJWorks. The only real difference to consider will be the gas used in both of these Airsoft guns as the ASG distributed version uses CO2 while the KJWorks version reviewed in this video uses Green Gas or Propane which will reduce the velocity a little bit. We will find out next week when I make my Field Test Shooting Video for the KJWorks CZ P-09 GBB Airsoft Pistol.
Build Quality: KJWorks is know for making high quality products and the KJWorks CZ P-09 GBB Airsoft Pistol is no different. Fit and finish is excellent and the quality of material is also very good with similar materials used as you would expect them compared to the real steel version with the exception of the metals not having to be as high grade because of way less force and pressure on the Airsoft version.
Realism: The KJWorks CZ P-09 GBB Airsoft Pistol is a one to one Replica of the real steel CZ P-09 firearm and on first inspection would be hard to tell apart. You are going to find CZ licensing throughout this Airsoft Pistol in all the right places and all the controls work just like the powder burning CZ P-09. The full blowback operation, reassessed barrel and ability to field strip it also aid in making the shooting experience super realistic.
Pros:
Build quality feels really goods, lots of weight to this Airsoft Pistol.
Full length blowback action.
Accurate licensed CZ P-09 Replica.
Trigger pull is nice in both single and double action.
Picatinny rail for adding accessories like a tac light or laser.
Double stack full size drop out Metal Magazine holds the Green Gas and 25 Airsoft BB’s
No orange tip which is always nice.
Easy to see white dot front and back sights.
Green Gas which when using propane is fairly cheap to shoot.
Easily Field Strippable.
Adjustable Hop-up.
Cons:
Sights don’t seem to be adjustable.
Controls are not fully ambidextrous.
Green Gas version has less velocity than CO2 version.
Comments:
The KJWorks CZ P-09 GBB Airsoft Pistol is really almost exactly like the ASG Distributed version since both are made by KJWorks at the end of the day. There are some slight differences between them like CO2 versus Green Gas and some other very minimal cosmetic changes. I would say go with which ever version is in stock and perhaps is less expensive at the time. You really can’t go wrong as this is a great choice to make for an Airsoft Side arm to use on the Airsoft field or for plinking in your yard or indoor range.
My Table Top Review Video of the KJWorks CZ P-09 GBB Airsoft Pistol:
Type: Gas Blowback Airsoft Pistol. Manufacturer: G&G Model: Piranha SL Materials: Metal & Polymer. Weight: 1.85 pounds (838 grams). Length: 10.3 inches (262mm) total. Barrel: 5.6 inches (142.5mm),Metal non-rifled smooth bore. Propulsion: Green gas or propane. Action: Blowback, single action only. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 20/25rounds. FPS: 370+ fps.
Trigger Pull: The trigger pull on the G&G Piranha SL GBB Airsoft Pistol is typical single action only with a super easy short take up (some of which is the trigger safety engaging), followed by a crisp predictable light release. The quick slide cycle allows for some quick semi auto shooting with the G&G Piranha SL GBB Airsoft Pistol making it a great fast action shooter with quick target acquisition.
Accuracy: I have not done my actual Field Test Shooting video review for the G&G Piranha SL GBB Airsoft Pistol but I expect it to perform similar to the G&G Piranha MK I and TR GBB Airsoft Pistol I made a Field Test Shooting Video for earlier and shoot consistently in the mid to high 300 fps with a 10 round grouping around 1-2 inches. Stay posted for my Field Test Shooting Video where I will confirm these predictions…
Build Quality: Like pretty much all G&G Airsoft guns including the Piranha series, the G&G Piranha SL GBB Airsoft Pistol build quality is really good. Fit and finish are excellent with virtually zero slide wiggle, I like the two tone stainless slide and chrome finish barrel version but the all black looks really good too. As with the entire Piranha line, the SL also has an updated Ceramic Whirl Cylinder Valve technology from G&G that should significantly help with freezing in colder or fast shooting situations along with a new Hop-up system you can easily adjust without taking the Airsoft gun apart by using the bullet shaped tool.
Realism: The G&G Piranha SL GBB Airsoft Pistol as far as I can determines not an exact replica of any specific real steel gun in production but it does share its looks and feel to that of the Glock but perhaps with an even more modernized look to it. Of course the SL version is elongates. You will find realistic function to the G&G Piranha SL GBB Airsoft Pistoling terms of it’s operation with its full blowback action, working slide catch release, magazine release trigger safety and takedown lever allowing for it to be field stripped easily.
Pros:
Good balance of metal and plastic for a balanced and light feel.
Partial slide Blowback operation should allow for even better gas performance and snappy operation.
Fiber optic sights front and back for easy target acquisition.
Has a working trigger safety.
Smaller grips perfect for people with smaller hands. Larger hands work just fine too!
Comes in a well presented soft foam form fitted box case.
New Hop-up system for quick and easy fine adjustments with no need to field strip the gun.
Long bottom rail for adding accessories.
Comes in all black and two tone black and sliver.
Comes with two magazines (20 round short and 25 round extended with fake bullets)
Comes with high quality speed loader.
Threaded barrel tip for add on mock suppressor if you want to.
Cons:
Sights are non adjustable.
Not an actual replica of any specific gun I know of but does share some Glock attributes.
Wish the extended mag held more rounds?
I like the hard shell case better that comes with the other Piranha versions.
Comments:
The G&G Piranha SL GBB Airsoft Pistol is for sure the flashiest version of the Piranha series of G&G Airsoft Pistols with its extended barrel and extended magazine with the fake bullets. I also imagine the extra barrel length will add some addition fps to the velocity and we will find out when I make my Field Test Shooting Video for it shortly. I am hoping the extended magazine holds more than an addition 5 rounds but again we are going to find out in my my Field Test Video so be sure to watch that one! If you don’t mind the additional bulk of the G&G Piranha SL GBB Airsoft Pistol over the MK 1 and TR than you will get an extra magazine and I a bit higher velocity.
My Table Top Review Video of the G&G Piranha SL GBB Airsoft Pistol:
In this Field Test Shooting Video I test out the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol in the Indoor Replica Airguns Sea Can Shooting Range to find out what the real world velocity and accuracy is for it. I start off by putting 5 rounds through my Chronograph and average the fps, I then I setup a fresh paper target 30 feet down range and put (max amount in the magazine) 8 Paintball rounds into it to see how close of a grouping I can get. If you want more details and specifications on the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol then checkout my Table Top Video for that information.
Starting with the Chronograph velocity test Umarex says you can expect around 350 - 400 fps which seems rather high to me based on my other Field Tests with similar .43 caliber Paintball Pistols. Perhaps this is using actual Paintballs whereas I was using rubber balls for my testing to reduce the mess in the Sea Can. I was able to average 300 fps using a brand new CO2 in what I would consider to be about a room temperature conditions which means in warmer situations I am sure we can get even higher than the 300 fps I hit on this day.
For the next portion of the Indoor Field Test I loaded 8 rounds into the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol and carefully placed them into a paper target 30 feet down range. I was using my standard seated position in the back with my hands resting on a sand bag up front which I have found to be fairly stable but there will still be some human factor which can effect overall accuracy. My results where about what I was expecting with a Paintball Pistol shooting Rubber Balls, generally they will spread out a bit at 30 feet and in this Field Test my 8 shot group spread out to about 8 inches or so. They did seem to be well centered on the target as a group and if I was shooting at a human sized torso at that distance I would have hit it every time.
The Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is another nice addition to the Umarex / T4E lineup up .43 Caliber Replica Paintball Pistols and if you are a Glock owner and want a Paintball Pistol to train with, then the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is about as good as you can get, the only other option would be to go with an Umarex Glock Airsoft or BB Pistol but at least we now have a bunch of options depending on your specific needs!
In this Field Test Shooting Video I test out the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol in the Indoor Airgun Sea Can Shooting Range to find out what the real world velocity and accuracy is for it. I first put 5 rounds through my Chronograph and average out the fps and then I setup a fresh paper target 30 feet down range and put 10 rounds into it to see how close of a grouping I can get. If you want more details and specifications on the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol then checkout my Table Top Video for that information.
Starting off with the Chronograph velocity test Sig says you can expect around 300 fps. I was able to average 286 fps using a brand new CO2 in what I would consider to be about a room temperature which means in warmer conditions I am sure we can get the claimed 300 fps made by Sig Sauer. I have been able to get higher velocities with other KWC 1911’s so perhaps with slightly lower fps for the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol we may get more shots per CO2?
Next I loaded 10 rounds into the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol and carefully placed them into a paper target 30 feet down range. I was using a seated position in the back with my hands resting on a sand bag up front which is fairly stable but there will still be some human factor which can effect overall accuracy a bit. My results where decent with about a 2 inch grouping that included 6 rounds right in the bullseye so out of the box the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol sights where good to go.
The Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol is another nice addition to the KWC built 1911 lineup and I do like the Sig Sauer/KWC customization of this version, maybe one of my favorite KWC 1911’s out there? You can expect around 300 fps and nice 2 inch grouping at 30 feet which will make this a perfect action plinker for shooting pop cans or targets at close to medium ranges.
Type:Paintball Gun. Manufacturer:Umarex - T4E. Model:Glock 17 Gen5 Materials: Metal & Polymer. Weight: 726 grams (1.6 pounds). Barrel: Smooth bore. Power Source: 1x12 gram CO2. Action: Semi-Automatic with blowback action. Ammo Type: .43 Caliber Paintball or Rubber Ball. Ammo Capacity: 8 Rounds. FPS: 350-400.
Trigger Pull: The trigger pull on Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol feels a lot like a double action trigger mainly because when you pull the trigger the inner barrel travels backwards into the magazine placing a paintball round in the barrel which seals the barrel with the magazine so less CO2 is wasted. This does make the trigger a little bit longer and heavier than a single action trigger. The internal hammer/striker is engaged from the blowback action reducing the friction on the trigger. In terms of it being similar to a Glock trigger pull it will be a bit heavier and longer but not bad overall.
Accuracy: So far I have not had the opportunity to test the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol out so stay posted for my future Field Test Shooting Video where I will see what kind of velocity and accuracy we can expect from it. For now you can watch my Field Test Shooting Video for the Umarex T4E Walther PPQ M2 .43 Caliber Paintball Pistol as it is very similar in design and should for the most part perform about the same.
Build Quality: The build quality of the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is really very good, metal parts are where you would expect them, the slide, slide catch, barrel, magazine and most internal parts giving the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol a solid 1.6 pound overall weight with the magazine in. The fit and finish is also very good with virtually no slide wiggle to be found.
Realism: The Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is a licensed Glock Replica via Umarex which owns the licensing so you will find Glock licensing and branding throughout this Paintball Pistol. Just looking at the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol you would find it hard to tell the difference between it and the real steel Glock 17 Gen5 but there are some notable differences as in the length of the slide travel which is about half of what you would expect from a real Glock. This is to account for the obvious internal differences to allow for CO2 and paintballs to be used. Overall the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol would make a great training pistol if you are a Glock owner and want to use the closest gun to it.
Pros:
Really great weight and solid feeling gun.
Full Metal slide that locks back on the last shot.
All metal heavy full size drop out magazine adds some additional weight to the gun.
Good for Glock shooters looking for a training weapon.
Everything works pretty much like the real gun so again great as a training tool.
Easy to see white dot sights front and back.
Working trigger safety.
Fit and finish is excellent.
Magazine spring release really shoots the magazine out so be warned!
.43 caliber barrel opening, adds to realism.
Fully Glock licensed via Umarex.
Comes in a ice hard shell case.
Cons:
Trigger is a bit heavy, not as light as a real Glock, more of a double action trigger in function.
Magazine only holds 8 rounds, so you are going to need extra magazines for sure.
Blowback action is not full blowback, more like a typical half blowback BB gun.
Comments:
The Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is another great addition to the Replica Paintball Pistol options out there and if you are a Glock owner looking for a training gun you can use for some additional trigger time outside of a gun range or want to perform realistic training exercises with live players then the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol will fill this need. I am looking forward to testing it out when I make My Field Test Shooting Video as Umarex claims it to have significantly higher fps (350-400) then some of the other replica T4E Paintball guns I have reviewed so far. I guess we will see soon!
