Type: Blowback Airsoft Pistol. Manufacturer: Distributed by Cybergun. Model:Taurus PT24/7 G2. Materials: Metal & Polymer. Weight: 1.86 pounds (844 grams). Barrel: Metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, single action only. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 19 round double stack full size metal magazine. FPS: Claimed 438 using .20 gram BB's.
Trigger Pull: The trigger pull on the Cybergun Taurus PT24/7 G2 Airsoft Pistol is Single Action Only and feels really good, it was much lighter than I expected and has a medium length take up, the reset positions the trigger fairly far back ready for quick follow-up shots. You'll also find a working trigger safety on this Airsoft Pistol which is a nice touch and ads to the realism.
Accuracy: At this point I have not shot the Cybergun Taurus PT24/7 G2 Airsoft Pistol, I imagine it should perform well considering it has an adjustable spin-up or hop-up along with a rear site that can be adjusted for windage. According to the manufacturers claimed fps, we should get around 438 fps using .20 gram Plastic Airsoft BB's. I will be a bit surprise if this Cybergun Taurus PT24/7 G2 Airsoft Pistol actually hits this rather high velocity but anything over 400 will be impressive.
Build Quality: Overall the Cybergun Taurus PT24/7 G2 Airsoft Pistol looks and feels really good. It has a nice weight to it but is not overly heavy. Everything feels tight and the finish looks great. the only thing I noticed that stood out a little bit was some flex in the forward part of the frame near the accessory rail. It seems to seperate just a little bit leaving a very slight gap and there is some flex here. I would not worry too much about this as it is not a structural consideration.
Realism: The Cybergun Taurus PT24/7 G2 Airsoft Pistol is a real ringer for the lead bullet firing version in almost every way and even has licensed trademarks on it through Cybergun but they are not exactly where you would find them on the real steel version, at least on the slide portion. Everything works like you would expect including full ambidextrous slide catch, safety, and magazine release. You can also easily field strip the Cybergun Taurus PT24/7 G2 Airsoft Pistol just like the real steel version. Available From: The Replica Airguns Store.
Pros:
Claimed to have a very high fps over 400 using .20 gram Airsoft BB’s.
Full length blowback action.
Supper accurate licensed Taurus PT24/7 G2 replica.
Excellent SAO trigger pull, very smooth and light.
Working trigger safety.
Double stack full size drop out metal magazine holds the CO2 and 19 BB’s.
Comes with additional back-straps in small medium and large sizes.
Adjustable rear sight for windage.
Fully ambidextrous controls.
Easily field strippable.
Red tip is easy to remove using boiling water to melt the glue.
Adjustable Bax hop-up.
Cons:
Comes with red tip installed and glued on.
Seems to have a little bit of frame flex in the rail area with a slight gap.
Safety selector is plastic.
Comments:
The most noticeable feature of the Cybergun Taurus PT24/7 G2 Airsoft Pistol is the claimed high FPS of 438 using .20 gram airsoft BB's. This seems kind of high for a full blowback Airsoft pistol but we will find out when I do my Filed Test Shooting Video Review for the Cybergun Taurus PT24/7 G2 Airsoft Pistol. Velocity aside the Cybergun Taurus PT24/7 G2 Airsoft Pistol is a very stylish gun, I have always been a Sig Sauer fan and it remind me a lot of the Sig brand but with a some more rounded finishing going on. The Cybergun Taurus PT24/7 G2 Airsoft Pistol has a lot going for it: Taurus Licensing, metal and polymer parts where you would expect them, fully ambidextrous working controls, adjustable rear sight for windage, adjustable hop-up, a working trigger safety, some power behind it and a full size double stack all metal magazine. It's also rather reasonably priced in our Replica Airguns Canada and US Online Store.
It was fun to shoot the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol for a change but really it was a lot like shooting one of my BB and Airsoft pistols, except in this case I was shooting .43 caliber rubber balls. I decided to not use paintballs inside my nice new Sea Can Indoor Airguns Shooting Range to keep things clean :)
First, I put three rounds through my Chrony Chronograph to see what the real world FPS would be, keep in mind I was using rubber balls rather than paintballs and the rubber balls are a little bit heavier than paintballs so this could bring the FPS down a bit compared to the lighter paintballs. Using a brand new CO2, the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol average 316 FPS which was high than the claimed 290 FPS!
Moving on to my accuracy testing, as per usual I positioned myself 30 feet back from my paper target and using a seated and rested shooting position I shot a full magazine (8 rounds) of rubber balls on target with the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol. I was not expecting anything close to what I would get with a BB or Airsoft pistol since Paintball guns are not known for super tight groups. I did manage to shoot around a 6 inch group with most of the shots staying within around 3 inches. This is about what I was expecting as paintball guns are not meant for "target practicing", generally you are going to be shooting human sized objects and hoping to get some well placed center mass shots. 3-6 inch accuracy at 30 feet will get the job done for sure. I did find the trigger using rubber balls did have a bit more friction while the inner barrel seated itself into the magazine. When shooting quickly it is much less noticeable.
I know some of you are going to ask about using the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol with rubber balls for non-lethal self defense and the reality is it will not stop a person who is persistent on hurting you. There is simply not enough stoping power here. Will it "sting like a bitch" if you get shot up close with one of these Umarex Walther PPQ M2 .43 Cal. Paintball Pistol? For sure but a well timed punch has more chance of dropping someone than a .43 caliber rubber ball moving at around 300 FPS. You may scare someone off simply by brandishing it but you take the chance of the person calling your bluff. Perhaps 8 rubber balls to the face will change their mind but that's a chance you have to figure out if you want to take or not.
As a paintball pistol, the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is about the best I have seen in terms of replica paintball guns. It is as good as they come for realism, even better than many BB and Airsoft guns and in terms of performance it did not let me down either.
Type: Paintball Gun. Manufacturer:Umarex - T4E. Model:Walther PPQ M2. Materials: Metal & Polymer. Weight: 848 grams (1.87 pounds). Barrel: Smooth bore. Power Source: 1x12 gram CO2. Action: Semi-Automatic with blowback action. Ammo Type: .43 Caliber Paintball or Rubber Ball. Ammo Capacity: 9 Rounds. FPS: 290.
Trigger Pull: The trigger pull on Umarex Walther PPQ M2 .43 Cal. Paintball Pistol feels a lot like a double action trigger, internally it may be striker fired so expect a bit of a longer trigger pull with a fairly long reset and a medium strength trigger weight. There is also a working trigger safety which works well.
Build Quality: The build quality of the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is really very good, metal parts are where you would expect them, the slide, slide catch, barrel, magazine and most internal parts giving the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol a nice near 2 pounds (1.87 pounds) of weight with the magazine in which makes the Paintball version a little heavier than the real still version (1.53 pounds) but once the real steal version is loaded with a full mag this may even out a bit. The Walther PPQ M2 does have a polymer frame but again this is normal with todays modern guns and helps keep the weigth down. Fit and finish is also excellent.
Realism: The Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is a near perfect replica of the real steel Walther PPQ M2, form the fully licensed markings to the large .43 caliber diameter barrel. If you placed the Paintball version side by side with the real steel version I doubt you could tell them apart? You will find that the slide cycle distance is a bit shorter than it shoudl be meaning that when the side catch is engaged the slide does not go as far back as it should. Filed stopping the Walther PPQ M2 .43 Cal. Paintball Pistol may requires some tools.
Full Metal slide that locks back on the last shot.
All metal heavy full size drop out magazine adds some additional weigth to the gun.
Very Accurate Walther PPQ replica, almost indistinguishable from the real still version.
Everything works pretty much like the real gun so a great training tool.
Adjustable yellow dot sights.
Working trigger safety.
Fit and finish is excellent.
Magazine spring release really shoots the magazine out.
Love the .43 caliber barrel opening, adds to realism.
Cons:
Trigger pull seems a bit long as it shoots like a double action trigger, may be striker fired internally?
Magazine only holds 9 rounds, so you are going to need extras.
Blowback action is not full blowback, more like a typical BB airgun.
Comments:
I'm really glad to see another Replica Paintball Pistol available in Canada, especially such a well made and realistic version. The Umarex Walther PPQ M2 .43 Cal. Paintball Pistol looks to be perhaps the best to date .43 caliber Paintball gun on the market and may even prove to be an option for non-lethal personal defense when using rubber balls with it. Not that I would trust my life with it but it sure looks the part and I am sure most people would not want to be on the receiving end of 9 rounds coming at you. As a training tool and Paintball gun the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol offers superb realism for this purpose. I am looking forward to testing mine out shortly :)
I don't get many Gas Blowback Airsoft Rifles to review all that often so when I get my hands on them I sure have a great time testing them out and feeling the blowback action tapping me in the shoulder as I shoot in semi or full auto modes. Sure Gas Blowback Airsoft Guns don't perform like their AEG counterparts, especially when you're shooting in full auto. You can expect way less rounds in each magazine and even with less rounds the last 5 or 10 shots when shooting rapid fire are going to be compromised but I really don't care because a well made Gas Blowback Airsoft rifle like the KJWorks M4 CQB Carbine GBB is just so much more fun to shoot than an AEG and way more realistic.
So let's get on with my test results for the KJWorks M4 CQB Carbine GBB Airsoft Rifle... The fps consistency was really decent, super consistent when I spaced out my 5 test shots they averaged 377 fps, not really having any low or high fps shots out of the bunch. I did have a full gassed up mag and was using .20 gram plastic 6mm Airsoft BB's for this part of the field test.
Again shooting in semi auto mode, I placed 10 rounds into my paper target setup downrange 30 feet and as per usual I was using a rested shooting setup sitting on a stool and resting the KJWorks M4 CQB Carbine GBB Airsoft Rifle on a sandbag up front. 9 out of the 10 rounds all grouped in about a 3/4 inch group with only 1 round coming outside a bit stretching the 10 shot grouping out to about 1.5 inches. Still really great for a Gas Blowback or any Airsoft rifle for that matter!
Next I shot the rest of the mag in full auto burst mode which was about 20 rounds left in the KJWorks M4 CQB Carbine GBB Airsoft Rifle at this point. As expected the KJWorks M4 CQB Carbine GBB Airsoft Rifle cooled down pretty quick and the last 5 rounds did fire just fine but there was a noticeable drop in power making the rounds shoot low on the target. Keep in mind I was shooting in a not too warm environment, about 15 degrees which is not bad but also not that warm.
I would have liked to have seen the KJWorks M4 CQB Carbine GBB Airsoft Rifle perform as consistently in full auto mode as it did in semi auto but that would have been asking a bit too much from a Gas Blowback Airsoft rifle. The KJWorks M4 CQB Carbine GBB Airsoft Rifle is a really well put together Airsoft Rifle that didn't let me down in the end.
First off make sure to checkout my Table top review for the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol, it really is a nice Beretta Airsoft copy, perhaps one of the best out there!
In the Field Test Shooting Video I perform my standard Chronograph and accuracy tests on the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol. I put 5 rounds through my Chrony Chronograph using .20 gram plastic Airsoft BB's with a full propane filled magazine. My Sea Can indoor airgun range was warmed up sufficiently for a gas gun test but I found the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol did shoot a tad bit slower than the 330 or so claimed fps coming in closer to 300fps. Still totally usable for indoor airgun wars.
Moving onto my accuracy test I placed 10 shots on target 30 feet down range using a rested shooting position, sitting in the back and sand bag up front. This time I was impressed with how tight a group I got, I was able to get the bulk of the shots all within about three quarters of an inch with only two shots hitting just a little outside of this. I did notice the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol was shooting a bit low for me but that can be easily corrected by adjusting the the internal hop-up to raise the shot placement up as required.
The G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol has a somewhat relaxed blowback but has plenty to give some recoil feel. You will get at least a full 27 round magazines worth of shots from each gas fill, perhaps even two if you stretch out your shooting a bit.
Type: Gas Blowback Airsoft Pistol. Manufacturer: G&G Model: GPM92 Materials: Metal slide & frame. Weight: 2.24 pounds (1016 grams). Length: 8.9 inches total Barrel: 4.6 inches,Metal non-rifled smooth bore. Propulsion: Green gas or propane. Action: Blowback, single and double action. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 27 rounds. FPS: 350+ fps.
Trigger Pull: The trigger pull on the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol is very good in both single and double action. Double action is a bit longer but not that much heavier when shooting in single action. Single action shooting is short, light and crisp as you would expect when shooting a real steel Beretta 92 style pistol.
Accuracy: I have not done my actual Field Test Shooting video review for the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol but I did get the chance to shot it quickly in my Sea Can indoor shooting range. Blowback felt good and accuracy seemed tight even though I was shooting free hand. I did notice the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol shot just a little bit low but I can adjust the hop-up slightly to account for it.
Build Quality: Like pretty much all G&G Airsoft guns, the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol build quality is right inline. Fit and finish where excellent and a lot of attention to detail was seen all over this Replica Airsoft Pistol. There is also some new gas valve technology from G&G that should significantly help with freezing in colder or fast shooting situations.
Realism: The G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol is an excellent replica of the real steel Beretta Mod. 92FS, the safety even acts as a working decocker. You'll also find 5, 10, and 15 numbered markings on the backside of the magazine that would normally indicate how many bullets are in the magazine, a nice touch for sure! Everything works pretty much the same as it would on a real Beretta M9 including the ability to fully field strip the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol.
Whirl Cylinder Valve system should expect to get decent amounts of shots per gas fill.
White dot sights front and back.
Comes with hard shell case.
Very detailed full size drop out metal magazine.
20mm rail for accessories.
Comes with high quality speed loader.
Safety also works as a decocker.
Threaded removable barrel tip for add on mock suppressor.
Cons:
Sights are non adjustable.
A little bit more expensive than some other Beretta M92 full blowback Airsoft pistols
Barrel opening not as recessed as much as a real 9mm would be.
Comments:
I would have to say the G&G GPM92 is one of the nicest Beretta Model 92FS Airsoft Pistols you are going to find out there. There is a ton of attention to detail for sure, You also get the hard shell case with included high quality speed loader and G&G's new Advanced Safety Release Valve and Revolutionary Whirl Cylinder Valve that help with freeze-up issues. You might pay just a smidgen more that some other similar Blowback Beretta M92's out there but I feel it is well worth it.
My Vimeo Table Top Review of the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol:
I just received some really nice G& G Airsoft guns to share with everyone, I have two CQB Styled AEG rifles and a fantastic Gas Blowback Beretta Mod. 92FS.
The AEG CQB AR or M4 styled rifles are similar in a lot of ways and are super compact and really well built. The G&G ARP-9 has a polymer receiver and hand guard while the G&G ARP-556 has a full metal receiver and hand guard. Both have good weight to them. You will also find Skeletonized PDW stocks and large crown flash hiders on both models along with M-LOK hand guards. Inside you will find upgraded ETU and MOSFET electronics.
Obvious difference are the 9mm style magazine found on the G&G ARP-9 versus the M4 styled high capacity magazine on the G&G ARP-556. You also get an ambidextrous safety sector switch on the G&G ARP-556.
Next I show off the G&G GPM92 Beretta Mod. 92FS Gas Blowback Airsoft Pistol. It comes in a high quality hard plastic case with a well made speed loader. If you place the magazine in the gun you will have room for two magazine in the hard shell case. The G&G GPM92 hold 27 roads in it's double stack magazine that has some interesting new features that help it perform much beet in cold environments and really boost green gas usage. G& G calls them the Whirl Cylinder Valve system and Micro gas filter. Both help eliminate free up in the gun when shooting fast.
The G&G GPM92 Beretta Mod. 92FS is really well made and shoot in double and single action and the safety even works as a decocker. For those looking to add a mock suppressor you will happy to know the G&G GPM92 has a threaded barrel tip.
In this Classic Legends Airguns comparison video I look at a number of different Classic or Legendary BB Airguns and compare them to each other to determine which one I personally feel is the best . My final choices are of course based on my own personal opinion and in this video I end up picking two as they where kind of each in their own class.
In this Makarov comparison video I look at a variety of different versions of Makarov BB Airguns and compare them to each other to determine which one I feel is the best in their class. My final choice is of course based on my own personal opinion and even then I found it hard to pick a clear winner.
In this comparison video I look at a variety of different Sig Sauer P226 Airguns and compare them to each other to determine which one I feel is the best Sig Sauer styled Airgun. Of course my choice may not be your choice :)
In this comparison video I look at a variety of different Beretta 92/Taurus PT92 Airguns and compare them to each other to determine which one I feel is the best Beretta/Taurus Airgun. Keep in mind what's best in for me may not be best for you.
In this comparison video I look at a variety of different 1911 Airguns and compare them to each other to determine which one I feel is the best 1911 Airgun, well at least for me.
My final video for the Sig Sauer Spartan and Max Michel Blowback CO2 BB Pistols where I find out exactly how they perform. I test out the fps velocity with my Chrony Chronograph and then setup a paper target about 30 feet away and shoot 10 rounds from a rested and seated position with my hands on a sandbag for stability.
I decided to only shoot the Sig Sauer Spartan 1911 since the Max Michel is really the same gun mechanically but with slightly different cosmetics which should not change the performance in any way. I did use a brand new Sig Sauer CO2 along with Umarex zinc coated steel 4.5mm BB's for this test.
Starting with my fps velocity Chronograph testing for the Sig Sauer Spartan and Max Michel Blowback CO2 BB Pistols, it did take me 2 shots to get the chronograph to read but after that I got 5 good readings averaging about 370 fps with the fastest shot close to 400 fps. I know the first couple of shots that did not read where up in the higher ranges so my average result may have been a little higher if they had been included in the testing.
For my accuracy test I shot 10 rounds at a paper target setup about 30 feet away using my standard sea can seated and rested shooting position and I didn't feel like I pulled any shots. That said 2 of the 10 shots seemed to get away on me a little bit but the other 8 where well within a 2 inch grouping and the 2 outliers only extended the grouping by about an additional inch. In terms of placement on target the sig Sauer Spartan Blowback CO2 BB Pistol was well centered left to right but did shoot about 3 inches high.
I was a bit surprised by how heavy the blowback is on the Sig Sauer Spartan and Max Michel Blowback CO2 BB Pistols, it kind of rocked my table a little bit especially when the CO2 was new. I also really like the trigger and feel that theses Sig Sauer 1911 offerings really give the KWC 1911 blowback CO2 airguns a run for their money. If you can get over the plastic stick magazine then I think you would really like owning a Spartan or Max Michel Sig Sauer 1911 CO2 Blowback Airgun.
Type: Air Pistol. Manufacturer: Sig Sauer Model:Sig Sauer Spartan & Max Michel 1911 Materials: Mostly all metal build. Weight: 2.06 pounds (934 Grams). Barrel: 5 inches - Non-rifled. Propulsion: 12 gram CO2. Action: Blowback single action only. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 16 round stick magazine. Max FPS: 410.
Trigger Pull: The trigger pull on the Sig 1911 CO2 blowback pistols is excellent! juts like a real 1911 it is single action only and both Sig Sauer 1911's have very short and very light trigger pulls. To make the shooting experience even more realistic you will need to engage the working back strap safety in order to shot these guns, again just like a real 1911.
Accuracy: I have not done my official Field Test Shooting Video for the these Sig Sauer CO2 Blowback 1911's but I did do a shooting field test for the Daisy Winchester Model 11 which these guns are built in design from. The Daisy Model 11 on a rather cold day shot around 360 fps so I am expecting better results from the new updated Sig Sauer Max Michal and Spartan especially in warmer shooting conditions. during my previous Daisy Model 11 testing I was also able to get around a 2 inch 10 shot grouping from a 30 foot shooting position.
Build Quality: Both of the Sig Sauer Spartan and Max Michel Blowback CO2 airguns are built really well, they feel solid in the hand and all the mechanical parts feel tight, the finish is also nice and does not show any signs of wearing. You will find metal parts pretty much everywhere except the magazines, even the safety, magazine release and slide catch are metal, it's kind of too bad the magazine was also not metal?
Realism: Sig Sauer modeled the Spartan and Max Michel after their real steel version and overall they are very similar with the exception that neither of the real steel version have under barrel rails, you will also find adjustable sights on both of the real steel versions and of course proper full size magazines. Other than that both the Sig Sauer CO2 Blowback 1911/s look the part and have full Sig Sauer Licensing and branding,
Good overall replica of the real steel 1911 Sig Sauer pistols.
Really nice single action trigger.
Full Sig Sauer markings and licensing.
Cam lever system for easy CO2 loading.
Working grip safety.
Can expect reasonably decent blowback feel.
Higher fps than the KWC 1911’s range.
White dot sights front and back.
Rail for accessories.
Cons:
Plastic stick magazine.
Rail would not be on the original Sig Sauer pistols.
Sights are pretty basic and none adjustable.
Would have liked a more recessed barrel.
CO2 Grip comes off pretty easily.
Comments: I know that everyone seems to like airguns with full size drop out metal magazines and yes it does make the airgun look and feel more realistic but once the magazine is in the gun the experience for the most part is the same. Having a stick magazine in this case allows for a more efficient CO2 delivery which should increase power and shots per CO2, I know a lot of people complain about the low FPS of the KWC 1911's so if this is you then perhaps you then you may need to give up a full size mag for more power and shots per CO2? Other then the stick mag issue both the Sig Sauer Spartan and Max Michel are really nice CO2 Blowback Airguns and I am really hoping they perform well when I get to my field test shooting review shortly.
My Vimeo Table Top Review of the Sig Sauer Spartan & Max Michel Blowback CO2 BB Pistols:
At SHOT Show this year I got to checkout two new 1911 CO2 Blowback BB Pistols from Sig Sauer, the 1911 Spartan and the 1911 Max Michel. A couple years back Sig introduced their (Advanced Sport Pellet) or ASP line of pellet shooting Airguns in both rifle and pistol version but interestingly enough Sigs 1911 line of airguns are not pellet shooter but rather 4.5mm Steel BB airguns.
Both the Spartan and the Max Michel 1911 BB Pistols are styled after current real steal Sig Sauer 1911's. There are some slight differences in the airgun version cosmetically, notable the added Picatinny rails on both of them but overall they are decent replicas of the real steel versions.
The Spartan and the Max Michel 1911 BB Pistols are built on the same components but have different finishings but their general specifications will be identical.
12 gram CO2
4.5mm steel BB's
16 round stick magazine
410 fps
2.06 pounds
Full metal slide and frame
Semi auto blowback operation
Single action only trigger
Cam lever CO2 loading port
Functioning grip safety
White dot sights
Both Sig Sauer 1911 Blowback BB pistols feel really solid and the single action tigers also feel really nice, what you would expect from a real 1911 trigger. As I mentioned already both Sig 1911 BB Airguns have Picatinny raise which you will not find on the original real steal versions, and I also notices that the Max Michel version has standard sights rather than competition sights and is also lacking the flared but-plate on the magazine.
I am looking forward to giving both these Sig Sauer 1911 Blowback BB pistols a good testing in the Sea Can Airgun shooting range so stay posted for my Field Test Shooting Video and also full Table Top Review.
I had a good time reviewing the Umarex Beretta APX CO2 Blowback BB Pistol, this airgun feels really good in the hand, has some nice crips blowback action, shoots pretty hard and shot right on target at 30 feet. The trigger is a bit long but it feels really smooth with an easy release and no real friction points to it.
Getting to the actual performance testing, I put 5 round through my Chrony Chronograph with the Umarex Beretta APX CO2 Blowback BB Pistol and was able to average 395 fps which by the way is exactly what Umarex says it will do! The temperature was not too hot or to cold and I was using a brand new CO2 so it was a fair test all the way around. It's good to see accurate fps specification coming from airguns companies.
Next I preformed my accuracy test shooting the Umarex Beretta APX CO2 Blowback BB Pistol at a paper target setup about 30 feet down range while using a seated and hand rested position for stability. I was impressed with how well the Umarex Beretta APX CO2 Blowback BB Pistol shot in terms of closeness to the bullseye, it really centered well on the paper. I put an 11 round string of 4.5mm steel BB's into the paper target and was able to get them all within about 2 inches. Not bad at all.
Overall I really like the Umarex Beretta APX CO2 Blowback BB Pistol, if you're an APX owner and want a BB shooting version for some back yard practice then you may want to pick one up. I would even suggest Glock owners or enthusiasts take a look at the Umarex Beretta APX CO2 Blowback BB Pistol since actual Glock airguns are hard to come by and the APX is pretty close in terms of size weight, shape and even looks.
Also make sure to checkout my Table Top Review for more closeup video and details on this CO2 Blowback air pistol.
I was originally planning on working out some of the magazine feeding issues with the Umarex Legends MP 40 Blowback CO2 BB Machine Gun as other reviewers had mentioned that the steel 4.5mm BB's can jam up a bit in the magazine. The only thing I did with my Umarex Legends MP 40 Blowback CO2 BB Machine Gun was to add a little bit of dry Jig-A-Loo lubricant to the magazine feeding track and make sure all my BB's where properly double stacked.. Other than that my Umarex Legends MP 40 Blowback CO2 BB Machine Gun is stock with no magazine spring mods.
I did find that my RWS Zinc coated Steel 4.5mm BB's had a tendency to bind a little in the top part of the magazine where the BB's go from a double stack to a single stack configuration. Now my RWS 4.5mm BB's are a bit older and I have found that older Zinc and Copper coated steel BB's will corrode a little which could cause some friction problems.
So for my Shooting Field Test I selected some brand new Umarex Zinc Coated Steel BB's and they did seem to work a little better for me as I did not get any magazine feeding issues during my testing of the Umarex Legends MP 40 Blowback CO2 BB Machine Gun. I did notice that when I did a magazine dump that the bolt cycle started to shorten up due to some cool down effect causing the bolt to lock, a quick 5 second break and she was good to go again to finish off the mag.
In terms of feet per second velocity Umarex claims around 450 fps for the Umarex Legends MP 40 Blowback CO2 BB Machine Gun, this may be possible with brand new CO2 on a warm day but I got closer to a 400 fps 5 shot average under normal testing conditions, this is perfectly fine for a blowback BB airgun.
When I performed the accuracy test from my standard 30 foot out position on paper targets I got a very tight 1 inch group shooting in semi auto. just a light bit high and to the left but very close to the center bullseye. When I opened up and went full auto the group did largen a little since the Umarex Legends MP 40 Blowback CO2 BB Machine Gun does rock a little back and forth with it's internal bolt blowback operation but the remaining 40 rounds did stay within the most part within a 2-3 inch grouping.
The Umarex Legends MP 40 Blowback CO2 BB Machine Gun is a really sweet air riffle with a legendary look, blowback operation, semi and full auto capability, decent fps, great accuracy and at the end of the day is simply a ton of fun to shoot!
The Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol is a really nice evolution to the already existing line of Sig Sauer ASP Pellet Pistols. The 30 round belt fed pellet magazine is what really sets it apart from the Sig ASP P250 and Sig ASP P226 which both share the traditional double sided 8 round rotary pellet magazines found in other CO2 pellet pistols like the Umarex PX4 and ASG CZ P-09 Duty.
The big question I had was how is the trigger going to feel and is a 30 round belt magazine going to be reliable? Will other aspects of the Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol function and perform like its rotary magazine brothers?
During my Chronograph feet per second shooting test I compared all three blowback pellet pistols shooting five rounds from each of them using a brand new CO2 and Sig Sauer 5.25 grain Match Ballistic Alloy Pellets. It was a close race with the Sig ASP P250 averaging 413 fps, the Sig ASP P226 just under with a 409 fps average and the Sig ASP P320 coming in a very close third at 405 fps. Only about 8 fps separating all of them!
Moving on to the target portion of my testing. As per my standard Field Test Shooting Reviews I setup my paper targets about 30 feet from my rested shooting position and since the ASP P250 and P226 both have 8 rounds per side rotary magazines I decided to shoot an 8 round grouping with all three Sig ASP pellet pistols. It was really close and perhaps one could say most of the variability was because of the human factor. All three CO2 Blowback Pellet Pistols shot about 2 inch groupings with perhaps one or two outliers, again most likely my fault :) I would say the Sig Sauer ASP P250 was perhaps the most accurate with the tightest of the three groups and also the most centered. The Sig Sauer ASP P226 and Sig Sauer ASP P320 where both a close second with both of them shooting just a tad left on target but pretty close to the center.
What about that Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol trigger and belt fed magazine? The trigger actually felt great, much lighter than I was expecting and I did not have one pellet feed error during my entire testing. At the end of the day all three Sig ASP pellet guns performed about the same, but I have to say having 30 rounds at your disposal without having to reload or rotate the stick mag really makes the Sig ASP P320 stand out and perhaps make it the winner in a very close contest.
Trigger Pull: The trigger pull on the Umarex Beretta APX CO2 Blowback BB Pistol is a little different then that of the real steel APX. On the real steel APX there is actually a trigger safety and the actual gun uses a striker based system with a fairly short reset and take-up. On the replica Airgun version the trigger does not have a built in safety and the reset and take-up are much longer (full length). I have read that both the real steal and BB versions of the APX both have about 6 pounds trigger pulls but I personally felt like the Airgun version was heavier than that, perhaps because of the long pull. Overall the Umarex Beretta APX CO2 Blowback BB Pistol trigger is acceptable but not my favorite.
Accuracy: I have not shot the Umarex Beretta APX CO2 Blowback BB Pistol so far but based on similar blowback stick magazine BB air pistols from Umarex with around 400 fps performance, I know that it will have a medium blowback feel and should shoot pretty close to the claimed 395 fps. I also expect at least a 2 inch or smaller 10 shot grouping from 30 feet back.
Build Quality: Very good, the Umarex Beretta APX CO2 Blowback BB Pistol feels heavier than 1.5 pounds in the hand, perhaps because it is a more compact gun. The metal slide, metal stick mag and internal metal parts all help to balance off the polymer frame nicely. Fit and finish is also good.
Realism: The Umarex Beretta APX CO2 Blowback BB Pistol overall is a really close replica to the real steel APX other than the added safety and missing trigger safety. The added safety does not stand out too much and does serve a purpose while the missing trigger safety could of at least been there for show if not an actual working safety. Other than that the Umarex Beretta APX CO2 Blowback BB Pistol is very close to the Beretta APX with its full licensing, open ejection port, recessed barrel working slide catch release and blowback operation. Available at the:Replica Airguns Store
Pros:
Great weight and feel to it, build quality seems really good.
Really nice replica of the original Beretta APX in most ways.
Working slide catch and release.
Fully Beretta licensed.
Easy to see white dot sights front and back.
Recessed barrel and open ejection port for added realism.
Accessory rail for adding a laser or tactical light.
Stick magazine but plate gives the elusion of a full size magazine and covers the CO2 tab.
Warning instruction are nice and discreet!
Cons:
Trigger is a bit long and perhaps heavier than the real steel APX trigger. It also does not have the trigger safety.
Has a stick magazine rather than a full size magazine.
Sights are non-adjustable which is common with airguns like this one.
Comments:
It's always nice to get another airgun replica for fans of that particular real steel gun so they have a low cost shooting option they can use in a lot more locations for some safe trigger time. The Umarex Beretta APX CO2 Blowback BB Pistol is a great addition for sure and it's also nice that it is somewhat Glock like in looks and operation for those Glock fans out there that are having a tuff time locating a Glock airgun replica :) Other than my trigger beef, I really like the Umarex Beretta APX CO2 Blowback BB Pistol. I hope it performs as good as it looks when I do my field test shooting video in a bit.
My Vimeo Videos for the Umarex Beretta APX CO2 Blowback BB Pistol:
Type: Air Rifle / Machine Gun. Distributer: Umarex Model: Legends MP 40. Materials: Mostly Metal build. Weight: 7.7 pounds (3.5 kilograms) Barrel: 10 inches - smooth bore steel. Propulsion: 2x12 gram CO2. Action: Internal BoltBlowback single action. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 52 round full size drop out magazine. Max FPS: 465.
Trigger Pull: The trigger pull on the Umarex Legends MP 40 Blowback CO2 BB Machine Gun is single action only and even though I have seen it tested at around 10 pounds pull, in person it does not feel that heavy and is actually fairly smooth. You will need ti charge the bolt for the first shot just like you would on the real steel MP 40.
Accuracy: I have not done my official Field Test Shooting Video for the Umarex Legends MP 40 Blowback CO2 BB Machine Gun but did take it outside for a quick test run. Like others have reported back you really need to take your time loading the double stack magazine properly or you can have some feeding issues. it may even be a good idea to use a little lubricant in the magazine to help with BB smoothness. I will know more after I ahed played around with the Umarex Legends MP 40 Blowback CO2 BB Machine Gun a little more and worked out the BB feeding issues.
Build Quality: The Umarex Legends MP 40 Blowback CO2 BB Machine Gun is pretty much all metal other than the stock and pistol grip. Pretty much everything that is black is going to be metal on this airgun. It weighs in at a hefty 7.7 pounds which is only a punt off form the real steel version. Overall the fit and finish is really good, all mechanical parts including the retractible stock work flawless.
Realism: The Umarex Legends MP 40 Blowback CO2 BB Machine Gun is a 1 to 1 replica of the real steel German made World War II Machine Gun. It is very authentic looking and has very similar operation. The BB version does have the ability to shoot in semi auto mode which the real steel version did not but this is a good feature for saving on CO2 and BB's It would have been nice if the bolt was abel to lock all the way back and up but since the movement is shortened this is not possible. Still the Umarex Legends MP 40 Blowback CO2 BB Machine Gun is a really nice replica and almost every way.
Great to have another full size Rifle / Machine Gun available to purchase in a BB gun version.
Mostly all metal design with good overall weight.
Semi and Full auto select-ability.
Dual CO2 design for increased shots and less cool down effect.
High capacity full size drop out metal magazine.
Great looking replica of the real steel MP 40 in looks, operation and weight.
Internal bolt blowback will give a bit of recoil feedback feel.
Adjustable rear sight for shooting at different ranges.
Price point is reasonable for this type of full size mostly metal rifle.
Cons:
Sights are not adjustable for windage.
Bolt does not go all the way back to the lockout position.
Some reviewers have said that a full mag load does not always work well in full auto mode.
Comments: When I first got my hand on the Umarex Legends MP 40 Blowback CO2 BB Machine Gun at this years SHOT Show I immediately knew it was going to be a hit. The Umarex Legends MP has a lot going for it... High fps, semi and full auto, nostalgia of being a war replica and super great build quality and fit and finish. The questions is really who wouldn't want one? Especially being a replica BB rifle which has to be one of the more limited areas when it comes to airgun replicas. I look forward to shooting this offering from Umarex a little more and sharing my experiences with everyone.
My Vimeo Table Top Review of the Umarex Legends MP 40 Blowback CO2 BB Machine Gun:
