Type: Pellet Pistol. Distributer:Umarex. Model:Stainless Ruger Mark IV. Materials: Metal and polymer build. Weight: 1.56 pounds (708 grams). Barrel: 5.3 inches (135mm). Total Length: 11 inches (279mm). Propulsion: Spring Piston. Action: SAO Break Barrel. Ammunition Type: .177 caliber pellets. Ammunition Capacity: 1 round. FPS: 320.
Trigger Pull: The trigger pull on the Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistolis not too bad, I feel it is a around 6-7 pounds or so without measuring. In comparison to a real steel 22LR semi auto SAO trigger pistol, the trigger is much heavier but most of these 22LR pistols of this nature have what I would consider to be near perfect triggers. Over time once you get use to the pressure and release point accuracy with this pistol it is for sure possible.
Accuracy: I have tested out the all black version of this pistol which will perform exactly the same or should I say is expected to perform the same since they are virtually the exact same Pellet Pistol but in different finishes. You can watch my Field Test Shooting Video for the all black version but in case you don’t make it there I will fill you in on the basic results… In terms of velocity I averaged 312 fps using 7 grain lead pellets and got around a 2 inch 7 rounds grouping but expect with a bit more trigger time to get closer to 1 inch.
Build Quality: The Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistolis a low cost target plinker that also doubles as a licensed Replica for that coolness factor so you won’t get an all metal super top quality build here. That said metal and plastics are well used and for sure details in the fit and finish have been improved over the Buck Mark URX version where I found the barrel felt a bit sloppy and the trigger was plastic. The Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol has a much tighter barrel fit when closed and the trigger is now metal! Maybe Umarex watched my video back in the day and took some notes?
Realism: The Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol most resembles the Mark IV Hunter edition and is pretty much bang on in terms of being a replica other than the tell tail hinge just under the barrel required for a spring piston design, there really is no way to get around this so I’m not going to criticize this minor difference. The real steel version is almost 3 pounds and so the pellet shooting version is a bit under weight so it would have been to have had more metal perhaps in the barrel and lower frame. Again since the pellet shooting version is a springer you will not have any working bolts or slide catches or a built in magazine.
Pros:
It's a decent Ruger Mark IV Replica!
Feels well built overall.
Expect it to have really good accuracy like the Umarex Browning Buck Mark URX since they share similar mechanical design.
Barrel locks into place much better than the Umarex Browning Buck Mark URX did.
Fully adjustable rear sight with fiber optic front sight.
Auto locking safety, just don’t forget to unlock before each shot
Actual metal trigger in this version.
Nice and compact, not too heavy.
Full Ruger licensed via Umarex.
Fairly low price tag.
Cons:
No built in rail for a sight system like the Umarex Browning Buck Mark URX.
Would have liked a metal trigger and maybe a slightly lighter trigger pull to match the real Buck Mark's very light trigger pull.
A bit more metal would have been nice.
Significantly more expensive than the black version which is the same exact gun in a different color.
Comments: The Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol is a decent looking replica and a decent pellet shooting target pistol and if you own the real steel version in 22LR you may just want to get your hands on one of these Break Barrel Replica Pellet shooters. The only real question is do you get the Stainless version with simulated wood grips or the all black version? If you like the look of the stainless version and don’t care about money whatsoever, then pickup that one up since it is a Limited Edition version that will only go up in value over time. If you are on a budget and don’t mind the look of the all black versions or maybe even prefer it then by all means grab one since at the end of the day they will both perform exactly the same.
My Vimeo Table Top Review Videos for the Umarex Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol:
Type:Airsoft pistol. Distributer:Umarex. Model:Smith & Wesson M&P 9L. Materials: Metal and polymer build. Weight: 1.7 pounds (757 grams). Barrel: 4.75 inches (121mm), non-rifled. Total Length: 8.5 inches (215mm). Propulsion: CO2 x1. Action: Semi auto blowback, single action only Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 15 rounds. FPS: 410 Claimed.
Trigger Pull: The trigger pull on the Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol is fairly light weight being a single action only trigger. There is about a quarter inch of take up with an easy release that is not hitchy at all. You will need to rack the slide to load your first Airsoft BB into the breach and engage the action but on the first shot but then the blowback action does this for you until the Airsoft Pistol is out of ammo and the slide locks back.
Accuracy: I have not performed my Field Test Shooting Video for the Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol so stay posted for that video coming out in the next couple of weeks. Umarex has claimed a velocity of around 410 FPS using .20 gram Airsoft BB’s but that does seem a bit quick, well will have to see when I place some shots though my Chronograph! In terms of accuracy I expect it to shoot about the same as most Full Blowback Airsoft Pistols which generally produces a 1.5 to 2 inch 10 shot grouping from 30 feet out using a semi rested shooting position. Again we will find out when I perform my Field Test Shooting Video for the Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol.
Build Quality: The Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol build quality is fairly decent, fit and finish looks good with not too much slide wiggle and the materials used are both metal and plastic or polymer that look to be good quality. I do expect some of the black finishes ot come off on the high spots as these guns are generally electroplated and not too thick with it but this can actually make the gun look more realistic with that slightly worn in look to it.
Realism: The Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol in terms of looking like the real steel version of its counterpart is very close for sure, it would be hard to tell without really taking a close look t it. Everything about this Replica Pistol works for the most part like the real steel version including most of the mechanical parts like the slide catch release, magazine release, take down lever, trigger safety and you can even fully field strip it which gives you easy access to the hopup on the barrel. Of course the full blowback action really seals the deal in terms of making this gun shoot like a real semi auto pistol.
Pros:
Very accurate replica of the S&W M&P 9L.
Fairly accurate weight and feel to it.
Metal and plastic parts where you find them on the real steel version, fit and finish is good.
Working trigger safety and ambidextrous working slide catch release.
Full size dropout metal magazine that holds Airsoft BB's and CO2.
Warning instructions are discreet under the trigger guard.
Recessed barrel and hidden CO2 screw for more realistic look
Fully Smith & Wesson licensed via Umarex.
Rail for add on accessories.
White dot sights for easy target acquisition.
Comes with three sizes of interchangeable grips S/M/L.
Adjustable hopup so you can at least adjust elevation at range.
Comes in a box rather than a clamshell.
Cons:
Has an orange tip but could be painted black or silver to match.
Sight are not adjustable.
15 round magazine has less capacity than some other blowback Airsoft Pistols.
Comments: The Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol is a nice addition to the Smith & Wesson M&P line of Replica Airguns. I’m glad they made it in full blowback but being Airsoft based that is generally the way they lean towards. Hopefully we get to see 4.5mm Steel BB version too in the future! For now we have it in Airsoft and with the longer barrel perhaps it will shoot a bit hotter than most of the other CO2 Blowback Airsoft Pistols, maybe even 410fps like Umarex claims but I will be surprised if it does. I will be happy to see something in the high 300’s to be honest. No matter what, you now have yet another Smith & Wesson option to consider when looking for your ultimate Replica Airgun!
My Vimeo Videos for the Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol
This time I have a tiny Mystery Box to unpack and show you guys, this time there are only two pistols, one is a Spring Piston Single Shot .177 Caliber Pellet Pistol and the other is a 6mm Airsoft Blowback BB Pistol, both are Licensed Replicas for Umarex. If you want to find out more about each Air Pistol then make sure to watch this Mystery Box Unboxing Preview Video!
This will be my only video this week as I am in what is called Peak Week in preparation for the Vancouver Fall Calssic Fitness show I am competing in this upcoming weekend. Peak Week really takes a lot out of me and is rather time consuming with the physical activity I am doing and daily blog styled videos I am posting for my other channel www.GetFitOver40.com.
If you are interested in what I do fitness wise then checkout that channel and follow me along this week as I hope to kick some but competing against dudes half my age.
Starting with my velocity test, I shot 3 rounds through my Chronograph using .177 caliber 7 grain lead pellets achieving 482, 489 and 466 fps with an average of 479 for the three shots. Not bad for a fairly compact Break Barrel Airgun. This is perhaps fast enough for small game like mice and small rats but you would need to get proficient on your shot accuracy to make sure you got a good head or lung shot to make it a more humane pest control.
For the accuracy portion of this Field test Shooting Review I proceeded to fire 6 rounds into a paper target setup 30 feet away. I use a semi rested shooting position with the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun resting on a sand bag up front and me sitting on a stool for stability. My 6 shot grouping was all within around 1.5 inches but I feel like this Pellet gun can do better with me getting a bit more use ot it, still not bad out of the box and with my first round shooting it.
I really like the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun as not only a Replica but it also shoed itself ot be a decent target Airgun at the end of the day. I do have to say the trigger is a bit long but not heavy at all, it has a smooth pull with a soft release. Most pimple should be able towel with this just fine. SO if you are looking for a Replica but also want an Airgun that can shoot hard and with decent accuracy then look no further than the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun.
In this Field Test Shooting Video Review I test out the brand new Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun in the Replica Airguns Indoor Airgun Range Sea Can to see what the actual velocity is along with accuracy. I first test fps using my Chronograph and I perform this test with and without the barrel extension to see how much the additional barrel length will increase velocity. I also shot the Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun in both semi auto shooting 10 rounds into my paper target setup 30 feet down range and then I perform a full auto 25 round magazine dump to see if the grouping expands or not.
Staring with the velocity test I did use brand new CO2 for this and the temperature was around 20 degrees Celsius or 68 Fahrenheit so not too cold or warm. With the Barrel extension installed I managed to average 418 fps shooting 4 rounds. With the barrel extension removed as expected the velocity did drop a bit down to 373 fps shooting 4 rounds and averaged out.
For my Accuracy Test I placed the Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun in semi auto for the first portion and fired 10 shots into the paper target setup 30 feet away, I was using a semi rested shooting position with a sand bag up front to rest the gun on and me sitting on a stool in the back. I did not sight the red dot in and found that out of the box the Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun shot down and too the right a fair amount but at least I was able to get most of the shots on the paper target and on camera. The grouping was around 2.5 to 3 inches so not super great but not bad either.
I then flicked the main selector to Full Auto since this is what most people want to see. I also reloaded the magazine with 25 rounds from the onboard hopper and unloaded the full magazine in a second or two. I did aim a bit higher and to the left this time to get the shots closer to the bullseye and I was able to do so with most of the 25 shots all within about 2.5 to 3 inches so not really any difference shooting in semi or full auto at least in terms of accuracy.
As I mention before in my Tabel Top Review for the Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun, it is a bit different looking and for me took a bit of getting use to but the good news is that it performs about the same as the other Crosman CO2 Full Auto Blowback BB Rifles in this similar lineup so if you like the look then don’t be afraid to pick one up over on our Canada or US replica Airgun Stores.
Type:Pellet Rifle. Manufacturer: Umarex Model:HK MP7 .177. Materials: Metal and Polymer. Weight: 4.4 pounds (2kg). Barrel: 11.7 inches (29.7cm). Total Length: 31 inches (78.7cm). Propulsion: Break Barrel Spring Piston. Action: Single Action Single Shot. Ammunition Type: .177 Caliber Pellets. Ammunition Capacity: 1. Max FPS: 490 Claimed.
Trigger Pull: The trigger on the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is single action only requiring you to break the barrel and compress the internal spring piston before you can shoot it. The actual trigger pull is pretty decent overall. There is very little take-up but the creep is on the longer side but fairly smooth requiring medium pressure. The release is a bit hard at first to predict but nothing some trigger time can’t get you use to.
Accuracy: I have not performed any shooting tests with the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun so far. I hope to make that Video Review next week. I expect the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun to perform well in the accuracy department especially with the included Red Dot Optical Scope installed. I hope the velocity rating from Umarex is based on lead pellets and not hyper velocity light weight pellets but we will find out the story when I perform my Field Test Shooting Video shortly!
Build Quality: The Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is a China made Airgun but looks to be well made. It has lots of metal parts as you would expect from a Spring Piston Rifle which adds a nice weight and feel to it. I did however have an issue with the front plastic mock Suppressor/Compensator as it does not seem to be attached to the metal barrel very well other than being pressure fit which is not going to cut it with all the vibration a spring piston system makes. My first shot loosened the mock Suppressor/Compensator so I will either have to hold it when shooting or find another way to make sure it stays in place.
Realism: The Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is kind of unique in this department as most break barrel rifles are not Replicas, especially the more compact sub machine gun styled ones. Umarex did good job making the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun look like a real HK MP7 for the most part. Of course it is a Spring Piston Rifle at its core so exceptions had to be made to make this work including molded non working parts like the magazine release, sector switch and, bolt/ejection port. That said all in all it is a decent looking replica considering it is a Break Barrel Airgun under the skin.
Pros:
Not many Replica Pellet Rifles on the market, especially in a more compact gun.
Comes with Red Dot sight.
Lots of rails for adding accessories to it.
Full HK Licensed by Umarex.
Collapsible Wire Stock.
Nice high claimed 490 fps.
No need for CO2 so low cost to cooperate.
Not effected by temperature like a CO2 Airgun.
Should have better accuracy than most BB Replica Airguns.
Very solid feel to it, good overall weight and feel.
Cons:
Not going to be an action shooter, have to reload after each shot.
A good overall Replica but not as Realistic or full operation as a BB version would be.
Mock Suppressor/Compensator poorly attached to barrel.
Comments: The Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is an interesting product, on one hadn't it is a Replica Airgun and most people expect a Replica Airgun to have all of the appropriate working parts similar to what would be found on the real steel version. But since this is a Break Barrel Airgun at the core the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun will not function the same as the Real Steel version so as long as you don’t expect it to and appreciate the fact that it should be a nice accurate low cost to operate target rifle then I think you will understand this product and enjoy it for what it is… A Single Shot Pellet Rifle that looks a lot like a HK MP7.
Type: BB Rifle. Manufacturer: Crosman. Model: ST-1. Materials: Metal & plastic. Weight: 6.07 pounds (2.75 kilograms). Total Length: 17.75/33 inches (Pistol/Rifle). Barrel Length: 15.5 inches. Propulsion: 12 gram CO2 dual cartridges. Action: Blowback - single action only. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 25 Round/Spring - 300 Round/Hopper. FPS: 480fps. Rate of Fire: 1400 rounds per minute in full auto
Trigger Pull: The trigger pull on the Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun is single action only since the right side charging handle must be cocked first before you can shoot it to engage the action. The trigger is short and fairly light but not overly light. The real fun happens with the Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun when you switch it over to full auto mode and with just one pull and hold of the trigger you empty the 25 round magazine in a mere matter of seconds at 1400 rounds per minute.
Accuracy: I have not actually shot this BB Rifle to date but expect it to get similar results to the other Crosman Full Auto BB Machine guns I have already reviewed. I am expecting a bit more velocity with the longer barrel extension installed and would be happy if I was able to get in the mid 400’s. Accuracy should also be about the same with 1 inch semi auto groups from 30 feet out expending a bit when in full auto.
Build Quality: The Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun is well made all around. Weighing in at 6.07 pounds without any add on accessories other than the included compact Red Dot sight. It feels solid and well built. There is a lot of metal going on inside and out of this rifle but keep in mind the top and bottom receiver are plastic with metal parts where they need to be like in the internals, pretty much all the working parts are metal, the magazine is full metal, the buffer tub is metal, charging handle, selector switch, magazine release, bolt release, trigger and of course the barrel is metal.
Realism: The Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun is not modeled after any real steel gun I know of. It resembles a futuristic weapon you would see in a SciFi Action Movie or Alien First Person Shooter. I was not a fan of it when it was first released by Crosman but after seeing and holding it in person it is growing on me quickly.
Pros:
Very unique, not like your regular Replica Rifles, very futuristic in design.
Drop out magazine doubles as the 300 round hopper and holds CO2 and BB’s.
Comes with Red Dot Sight and lots of rails for mounting what every you want on it.
Can be either a Pistol or Rifle or a PDW by adding or removing the Barrel Extension and Rear Stock.
Barrel Extension actual lengthens the barrel and should increase fps, not just for show!
Tactile comfortable rubber padding in multiple locations.
Semi auto and full Auto selectable.
Expected higher fps of up to 480.
Cons:
Some people may not like the look? Not like your normal modern rifle.
Front rubber grip comes off really easy at least on mine?
Will require barrel extension for full velocity.
Comments:
The Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun is a brave move by Crosman, I was not expecting something like this from them and when I originally saw it I was not sure if it was a good idea or not but again once seeing it in person and actually holing it I feel a lot better about it. It will for sure appeal to those looking for a futuristic Airgun or wanting something that looks like a gun from a video game or SciFi movie. I also like the versatility you have with the Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun being able to configure it how you like either as a Pistol, full on Rifle or PDW style shooter.
My Table Top Video of the Crosman ST-1 CO2 Blowback Full Auto Steel BB Machine Gun:
As the title suggest this a video about a Huge Mystery Box so I am not going to say what’s in it, I can say that their are 4 main products mostly rifles per-say. One is a Futuristic Full Auto BB Rifle, one is a Paintball Shotgun, One is an AEG Airsoft Rifle and one is a Replica Break Barrel Pellet Rifle.
So I have a lot of variety here to show everyone! I did absolutely zero research on any of the products I show in this video since like you I had no real idea what was inside other than how many and that most where rifle based.
Enjoy finding out what new products I will be reviewing over the next month with dedicated Table Top and Field Test Shooting videos.
I sometimes mention in my review videos that a gun is either Full Blowback or Partial Blowback and some people may not understand exactly what this means and how it effects the Airguns Blowback Action and Performance so I figured it would be best to make a dedicated video talking about the differences and also some of the Pro’s and Con’s of each type of Blowback Action.
In the video I obviously go into a fair amount of detail and show you around each type of Airgun and Magazine as they do differ a fair amount but to summaries for you here in this written form, the main difference is going to be how much the slide moves back and forth. With Full Blowback Airguns the slide will move much longer back and forth on the frame of the Airgun much like a real gun does and the slide Catch/Lock generally locks back further too. With a Partial Blowback Airgun the slide generally has a shorter range of movement back and forth on the frame with the slide locks usually about half of the distance compared to a Full Blowback Airgun.
The magazines are also very different as a Full Blowbacks Airgun generally has a partially exposed BB which is pushed into the barrel by the nozzle with each slide cycle. With a Partial Blowback Airgun the BB is generally not exposed and either the trigger action or simply the CO2 force is required to transfer the BB in the breach of the Airgun.
Another point to mention is that Full Blowback Airguns tend to use more CO2 and have a slightly lower velocity as compared to Partial Blowback Airguns but this is not a rule.
There are many types of magazines used in Airguns and some of this is dependent on the ammunition used.
For instance a stacked type of magazine often used for Steel BB and Airsoft can not be used for Pellets as pellets tend to deform when stacked in such a way since there is no metal casting protecting them from mashing into each other.
So what type of magazines do we generally see in Airguns? The most common Airgun magazines are as follows:
Simple Stick Magazine
Mostly used with Steel BB but also found in some Airsoft Airguns.
Some Pellet Airguns use a type of stick magazine with a rotary magazine on each end.
Used in non-blowback and blowback Airguns.
Can be made from plastic or steel or a combination of both materials.
Full Size Drop Out Magazine
Used with Steel BB and Airsoft guns.
Generally you will find these types magazines hold both the BB’s and CO2.
Used in non-blowback and blowback Airguns.
Commonly used with Airsoft Rifles in mid to high capacity.
Can be made from plastic or steel or a combination of both materials.
Rotary magazine
Used with Steel BB, Airsoft and Pellet Airguns.
Used in non-blowback and blowback Airguns.
Can be made from plastic or steel.
Can often use mixed ammo types as in both 4.5mm Steel BB and .177 caliber pellet.
Belt Fed Magazine
Like rotary magazine belt fed magazine can accommodate Steel BB, Pellet and Airsoft but are most often used with Pellet Airguns.
Usually found in a full size magazine that also holds the CO2.
Used in non-blowback and blowback Airguns.
Can be made from plastic or steel or a combination of both materials.
Internal Magazine
Used with Steel BB, Airsoft.
Can have a hopper built in hat feeds a spring fed magazine.
Usually found in lesser expensive Airguns but not a rule.
In this Video I go through each type of Airgun Magazine and talk about their differences and uses.
I have another Full Auto Fun Video this one focusing on 4.5mm Steel BB Versus 6mm Plastic and which one is better in terms of accuracy and shredding power. I perform this super scientific test by shooting obviously in full auto two comparable Steel BB and Plastic Airsoft Rifles at a paper target setup 20 feet away with a magazine as a backer so I can see what the accuracy is like and how much of the paper magazine gets shredded by each ammo being tested.
I have split this video into three separate videos, in video one I compare two similar AR styled rifles, a CO2 powered Blowback 4.5mm BB Rifle to a Gas Blowback 6mm Airsoft Rifle. In video two I compare two AK type Blowback Rifles to each otters, again a CO2 4.5mm Steel BB along with a Gas 6mm Airsoft.
And lastly in Video three I compare my top picks for each category which include a non-Blowback CO2 4.5mm BB Machine gun to an AEG 6mm Airsoft Rifle.
I have another Full Auto Fun Video this one focusing on 4.5mm Steel BB Versus 6mm Plastic and which one is better in terms of accuracy and shredding power. I perform this super scientific test by shooting obviously in full auto two comparable Steel BB and Plastic Airsoft Rifles at a paper target setup 20 feet away with a magazine as a backer so I can see what the accuracy is like and how much of the paper magazine gets shredded by each ammo being tested.
I have split this video into three separate videos, in video one I compare two similar AR styled rifles, a CO2 powered Blowback 4.5mm BB Rifle to a Gas Blowback 6mm Airsoft Rifle. In video two I compare two AK type Blowback Rifles to each otters, again a CO2 4.5mm Steel BB along with a Gas 6mm Airsoft.
And lastly in Video three I compare my top picks for each category which include a non-Blowback CO2 4.5mm BB Machine gun to an AEG 6mm Airsoft Rifle.
For this Video 2 Accuracy Test I shoot all of the above listed Airguns at a paper target setup 30 feet down range using a semi rested shooting position with my hands resting on a sand bag up front and seated on a stool in the back. It’s not perfect but works well enough. I didn’t take a ton of time with each gun since there where 4 to shoot in this Field Test Shooting Video so accuracy may have been a bit better if I took a little more time with each gun.
In Video 2 I test the power and penetration of each Airgun option shooting at a pop can, a soup can and a toilet paper roll so make sure to watch that video if you have not already watched it.
For this Video 1 Power Test I shoot all of the above listed Airguns first at a pop can, then a soup can and then a toilet paper roll. The ides is to test penetration abilities with the pop and soup can and then raw force shooting the toilet paper as it will absorb all the energy from each airgun round and by gauging how much the toilet paper reacts or moves it should tell us which airgun has the most raw power or energy.
In Video 2 I will be testing accuracy using my standard 30 round paper target setup in the Replica Airguns Sea Can so stay posted for that upcoming video shortly…
This is Video 2 of the Full Auto Fun 2022 video series where I shoot my Crosman AK1 Duel CO2 Full Auto BB Machine Gun at some water filled cans and a paper gel target just for some good old fun times! In Video 1 which is already posted, I tested out the Crosman A4-P Duel CO2 Full Auto BB Gun. And in Video 3 which I have not posted yet I will be shooting the Air Ordnance SMG .22 which is a PCP powered Full Auto .22 Caliber Pellet Machine Gun to finish this 2022 Full Auto Fun Series off.
In this years 2022 Full Auto Fun Video series I take three Full auto Airguns outside in the yard and have some fun with them shooting at water filled cans and a gel target. I picked two Full Auto CO2 4.5mm Steel BB Guns from Crosman, the A4-P AR-15 Pistol and the AK1 Rifle which is a modernized AK 47. The Crosman A4-P representing my most compact entry with the Crosman AK1 representing my mid size entry even though it is fairly large. I end this series with the Air Ordnance SMG .22 which is a PCP powered Full Auto .22 Caliber Pellet Machine Gun and yes this represents my large or at least most powerful choice for this years 2022 Full Auto Fun Video.
In this video, (Video 1 of the series) I have some Full Auto Fun with the Crosman A4-P, watch and enjoy along with me as I place 100 rounds down range ripping up some water filled cans and putting holes in my gel target.
In this Field Test Shooting Video I get outside for a change and test out the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle to see what the actual velocity is and what kind of accuracy I can expect shooting at much further ranges than my Sea Can Airgun Range can offer. If you want to know more about specifications and details for this Break Barrel Air Riffle make sure to watch my Table Top Video for information along with more closeup video.
Starting with the velocity for the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle, Beeman claims up to 475 fps but based on how light the spring feels when cocking this Airgun I was not expecting to get that high of fps. I placed 5 rounds through my Chronograph and was able to average 361 fps using 14.3 grain lead pellets which gave me an energy of 4.14 foot pounds. This isn’t bad in terms of energy but I would not suggest this Air Rifle for pest control because of the lower fps unless you are shooting really small pests at closer ranges.
While I was testing velocity to speed things up I also placed the same rounds on my paper target setup around I would say 80 feet down range (Best guess). Keep in mind I am not the best long range shooter especially with Spring Piston Air Rifles but I was able to get around a 3 inch 5 shot grouping at this distance with three of the shoots all within about 1 inch of each other so not bad for me. I was using the provided Beeman 4x30 optical scope which was nice and crips. My pellet choice was .22 Caliber Crosman Premier Hollow Point 14.3 grain lead Pellets.
What I like about the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle is the easy to cock break barrel, the optical scope, the nice wood finish and its overall performance. I did feel the trigger was a bit heavy and it would be nice to have just a bit more power but that would come at a harder to cock break barrel. If you want an easy shooting and overall good looking lower cost Spring Piston Pellet Rifle in .22 caliber then I would recommend the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle for sure!
Type:Pellet Rifle. Manufacturer: Beeman Model:Longhorn II 10611. Materials: Metal and Polymer. Weight: 8.5 pounds (3.77kg). Barrel: 18 inches (45.7mm). Propulsion: Spring Piston. Action: Single Action Single Shot. Ammunition Type: .177 and .22 Caliber Pellets. Ammunition Capacity: 1. Max FPS: 495 Claimed.
Trigger Pull: The trigger on the Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle is single action only requiring you to break the barrel and compress the internal spring piston before you can shoot it. This will also engage the safety which you have to disengage for each shot manually as an added safety measure. The actual trigger pull is pretty good overall. There is very little take-up but the creep is on the longer side but very smooth not requiring too much pressure. The release is also smooth but will take a bit of time to learn just exactly when it is going to release. There is an adjustment screw for the trigger but it is not advertised or explained in the manual exactly how this effects the trigger pull so a bit of trial and error may improve the trigger feel.
Accuracy: I have not performed any shooting tests with the Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle so far, I hope to make that Video Review next week “weather permitting” as I want to get outdoors for this test to be able to shoot it at longer ranges. I expect the Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle to perform well in the accuracy department especially with the 4x32 optical scope installed. In terms of power I did notice that the spring does seem ot be fairly strong so I am hoping to get close to the claimed 495 fps even using .22 caliber heavier grain pellets.
Build Quality: The Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle is a China made Air Rifle but looks to be well made. It is mostly metal other than the synthetic modern stock, even the iron fiber optic sights are full metal front and back. I am not a big fan of the stock texture patter but it does work to add extra grip.
Realism: The Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle is not a copy of any real steel gun in production but does have that overall rifle shape to it so yet it looks like a gun but most people will be able to immediately see that it is a Pellet Rifle and that is exactly what it is since it is not trying to be anything other than that.
Pros:
Comes with two barrels for .177 and .22 caliber pellets.
Comes with included 4x32 scope and ring mounts.
Durable synthetic stock with modern look and pistol grip.
Can also shoot using included iron metal fiber optic adjustable sights.
Automatic trigger safety system.
Rated at 495 fps using .22 caliber pellets so top out at max Canada legal power without a firearms license.
Nice rubber butt-pad looks good and adds to shooting comfort.
Has a scope stop so your scope will stay nicely in place.
Really well priced for what you get which is two rifles one.
Cons:
Changing out barrels does require tools.
Not a big fan of the stock texturing pattern.
Made in China.
Comments: The Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle is a very affordable Break Barrel Spring Piston Pellet Rifle that offers two Airguns in one with it’s interchangeable barrel system allowing you to shoot either .177 or .22 Caliber pellets. You also have the option of using the already installed Fiber Optic fully adjustable sights or you can install the included 4x32 Optical Scope for potential longer range shooting. The modern looking synthetic stock with it’s pistol grip and rubber butt-pad will make shouldering this Air Rifle super comfortable and I would imagine help with accuracy at the end of the day.
Type:Airsoft Rifle. Manufacturer: Tokyo Marui. Model:CQBR Block1. Materials: Metal and Polymer. Weight: 9.97 pounds (4.52kg). Barrel: 9.84 inches (250mm). Propulsion: Gas Blowback. Action: Semi & Full Auto - SAO trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 35 Max FPS: 350 Tested (.20 gram).
Trigger Pull: The trigger on the Tokyo Marui CQBR Block1 GBB Airsoft Rifle is single action only so the charging handle will need to be engaged on your first shot un less the bolt is already back for a preview empty magazine and reload. The trigger is light and short with virtual no makeup but then just a bit of creep before releasing the internal striker and firing a round.
Accuracy: I did already perform my Field Test Shooting Video for the Tokyo Marui CQBR Block1 GBB Airsoft Rifle so I do have some information to share relating to the shooting abilities of this Gas Blowback Airsoft Rifle. During my Velocity Chronograph Test I was able to average 332 fps using .20 gram Airsfot BB’s with my highest velocity shot hitting 350 fps. My 10 shot grouping at 30 feet away yielded a 1.5 inch spread and when I placed the Tokyo Marui CQBR Block1 GBB Airsoft Rifle in full auto it did open up a fair amount since the blowback action really rocks this gun around a lot making full auto shooting spread out much monroe than semi auto shooting but still so much fun to shoot in full auto :). You can watch my full Field Test Shooting Video here!
Build Quality: The build quality of the Tokyo Marui CQBR Block1 GBB Airsoft Rifle is one of the highest out there with high quality metal parts throughout this GBB AIrsfot Rifle both inside and out. Some of the internals include a heavy duty 19mm blowback piston, New mechanism Z-system to prevent wear and tear of bolt catch, piston absorber and friction relief bolt roller to reduce the burden on internal parts due to bolt operation.
Realism: The Tokyo Marui CQBR Block1 GBB Airsoft Rifle is a near perfect replica of a Colt licensed AR 15 and Tokyo Marui has a ton of detail to the fit and finish including the unique and multiple finishes on the external parts: The rail hand guard, front sight, and stock reproduce the difference in FDE color tone applied to each part as in the real thing. The metal rail hand guard reproduces the color by alumite treatment with excellent scratch resistance. In addition, the upper / lower frame and bolts are made of Ceracoat, which has a strong coating film and excellent scratch resistance.
Pros:
Super high quality GBB Airsoft Rifle.
Bolt locks back for easy hop-up adjustments.
Very heavy blowback operation.
Lots of metal parts, mostly everything except the stock, fore grip and pistol grip.
Lots of mounting points with it’s quad rail setup.
Awesome internals: Heavy duty 19mm blowback piston, New mechanism Z-system to prevent wear and tear of bolt catch, piston absorber and friction relief bolt roller to reduce the burden on internal parts due to bolt operation.
Attention to detail goes beyond expectation! Color reproduction and special surface treatment is a good example of this.
Easy to mount a sling with it’s QD tactical sling mounts on handguard, lower receiver, and stock.
Adjustable hop-up as expected.
6 portion rear stock.
Removable and fully adjustable rear sight.
Great for close and mid range shooting situations with a 350 average fps using .20 gram BB’s.
Accuracy was good at 30 feet getting around a 1.5 inch 10 shot grouping.
Cons:
My magazine did not seem to seal very well in the nozzle area when filling with propane but mag seemed to fill OK, just seemed to waste a bit of gas while filling.
Heavy blowback makes full auto accuracy move around a fair amount.
Pretty much have sue the included magazine filling tube to load BB’s in the magazine sop will need ot be carried with you in a game.
On the very high end of the price spectrum.
Comments: I am a bit of a sucker for Blowback Airguns in general whether it be Pistol, Rifle, BB, Pellet, Paintball or Airsoft. So right out of the box I loved the Tokyo Marui CQBR Block1 GBB Airsoft Rifle with its heavy blowback recoil. All that aside the Tokyo Marui CQBR Block1 GBB Airsoft Rifle is one of the highest quality Gas Blowback AR 15 type Airsoft Rifles you will be able to get your hands on assuming if you can find it in stock. It is a near perfect Airsoft Replica of a real steel Colt AR with only the best finishes and parts available for such a GBB Rifle.
