My first Airgun Silent Auction! I came into some used Airguns as part of an "Airgun - Blank Gun" package and since I already had these models I did not need them for my personal collection so I'm putting them up as a Three Airgun Silent Auction package.
These three Airguns are all made by Umarex and use 12 gram CO2 cartridges, the MP5K PDW shoots 4.5mm steel BB's and has blowback operation. The Beretta Elite II loads 4.5mm steel BB's into it's all metal drop out magazine and is know for it's very good combination of high FPS and accuracy. The CPSport uses a rotary 8 round magazine that hold 8 lead pellets, it has a full size drop out magazine that holds the CO2 making it very realistic and also easy to load CO2.
In order to won these fine Umarex Preowned Airguns, you will need to send in your highest bid to mike@replicaairguns.com before August 27th midnight. At the conclusion of this Silent Auction I will notify the winner. This Airgun Silent Auction is open to both my Canada and US customers, Canadian Customers will pay an additional $17.99 for Shipping/Handling plus their local provincial sales Tax. US Customers will pay $29.99 International Canada to US Shipping & Handling but will not pay any sales tax.
Of course you can also buy these guns new in my Canada & US Replica Airguns Stores
Here is a short video update along with a few photos of my KWC and Umarex Airsoft Pistols recently added to the Canada Replica Airguns Store. The models showcased are the KWC M1911 & KWC M92 (PT99) along with the Umarex Walther P99. All of these pistols use 6mm plastic Airsoft BB's, shoot over 366 fps using CO2 and have blowback operation.
Watch my Vimeo Update Video on these three Blowback Airsoft Pistols:
Last but not least for now, just added to the Canada Replica Airguns Store - the KWC M92 (PT99) CO2 Blowback Airsoft Pistol.
The KWC M92 (PT99) is essentially is the Airsoft KWC version of the Cybergun GSG 92 without any branding and also in 6mm Airsoft caliber. And it comes already to shoot in either semi or full auto so no modifications required!
The KWC M92 PT99 features a full size drop out metal magazine that holds both the 6mm Plastic Airsoft BB's and the CO2 cartridge. It features a working slide with realistic blowback operation and can be fully field stripped just like the actual sidearm.
The KWC M1911 is essentially is the Airsoft KWC version of the Cybergun Tanfoglio Witness 1911 without any branding and also in 6mm Airsoft caliber.
The KWC M1911 features a full size drop out metal magazine that holds both the 6mm Plastic Airsoft BB's and the CO2 cartridge. It features a working slide with realistic blowback operation and can be fully field stripped just like the actual 1911 sidearm.
The Umarex Walther P99, one of Walther's most popular semi auto pistols. This CO2 powered Airsoft version captures the realism with its BLOWBACK, semi-automatic action and full metal slide.
A 12g CO2 cylinder loads in the back of the grip and the Airsoft BB magazine releases with the push of a realistic magazine release lever. The recoil action made live by the power of CO2 kicks the slide back giving you that oh-so-realistic feel. A great pistol for Target, Airsoft Games and owners of the P99 or similar firearms.
6mm Airsoft Plastic BB's
CO2 Powered
15 round drop out metal magazine
Up to 380 fps
1.5 pounds
7.25 inch length
Double action only
Blowback
Metal slide - polymer frame
Tactical Rail Mount
Fully Licensed
Comes with red tip (Can be removed with a bit of work ;)
Trigger Pull: The trigger pull for both KWC blowback single action pistols is very good, the Desert Eagle is a bit better with less play and a lighter pull while the Sigma SW40F still feels very good but has a little bit more take up and a slight bit more pull required.
Accuracy: I shot both guns from 20 feet out in semi rested position and got similar results. I was able to place 10 rounds in a 2.5 to 3 inch group and both guns shot well centered. I have full confidence that I could easily hit a man sized target from 50 feet away. Both KWC Airsoft pistols got right around 400 fps (5 shot average chrony testing) with the Desert Eagle only 10 fps higher than the Sigma SW40F and this was using .20 gram plastic Airsoft BB's.
Build Quality: The build quality for both guns is pretty much the same, both have a metal slide and barrel with a polymer frame and plastic grips, the Sigma SW40F had a plastic magazine release and trigger while the Desert Eagle used metal in these parts. The KWC Sigma SW40F seemed to wear a bit better as the painted finish seemed more durable. I found the metal on metal areas on the Desert Eagle where losing the paint and also in some of the high spots. Over all the guns worked very well and had good fit and finish.
Realism: The KWC Desert Eagle .50 and Sigma SW40F are very accurate replicas of their real steel counterparts, with the Desert Eagle also having the full licensing on it for added authenticity. The workings of both Airsoft guns are pretty much just like a real gun with full size drop out magazines and very heavy full blowback operation. The slides on each gun give a nice metallic sound when operating.
Very believable replicas of the real steel versions.
Cons:
Paint wear in high spots noticeable on the Desert Eagle.
Non adjustable sights.
Both go through CO2 fast.
No trademarks on the Sigma SW40F.
Comments:
It's wonderful to get these KWC blowback Airsoft guns here in Canada finally and have the ability to review them for everyone. They remind me a lot of the Cybergun 4.5mm Steel BB blowback pistols very much and this is probably because there are Airsoft version of these guns also distributed by KWC. Whether you want one of these very nice Airsoft pistols for plinking and target practice or to use in battle on the Airsoft field, either gun would make a great choice. I am really loving the fact that I now have more guns I can review and Airsoft or 4.5mm Steel BB it really doesn't matter to me, I'm having way to much fun to care ;)
Last update for the day, I am happy to announce that I have added two Gas Blowback Airsoft Rifles from WE to the Canada Replica Airguns Store. They are both fantastic guns that are the spitting image of their real steel counterparts and both have awesome blowback action and feel. Both rifles shoot in semi and full auto which is exhilarating!
Some more asked for blowback Airsoft pistols just added to the Canada Replica Airguns Store, these three are from KJWORKS and are very high quality for sure with excellent fit and finish on them!
I am super happy to announce a bunch of new Canada Store Products coming very soon. I have sourced out some Blowback Airsoft pistols and also a couple of GBB We Airsoft Rifles. (KJWorks: Elite 1A, KP-07, KP-02) (KWC: DE .50, SW40F) (RAM P99) (WE: G39C, M4 CQBR).
I am also adding some airgun pistols that I have not been able to find a supplier for here in Canada up until now, and I will also be adding them to the Canada Store shortly. (Umarex: Browning Buck Mark URX, XBG, Beretta 90two).
And of course the addition of some new accessories that I have been wanting to have listed in the Canada Store for some time now. (Daisy Zinc Coated BB's, Umarex CP99 - PPK - Rotary Magazines, Body Guard Mace Spray, Schrade Hand Cuffs)
So if your interested in any of these items then keep checking back, I will be adding them to the Canada Store as quick as I can - time permitting!
I have had a lot of people ask to buy my Russian made ZMZ Tyrex PPA-K-01 4.5mm BB Machine Gun and offer a lot of money for it and I have turned them all down, some may say I am crazy but the people offering the big bucks understand how rare this gun is here in North America and will pay what it takes to own one.
I was approached by the seller that I originally purchased my ZMZ Tyrex PPA-K-01 from and he informed me that he has two brand new in the box units he has acquired and is willing to sell. So for those of you who wanted to buy mine from me, now is your chance to get one!
He is asking $850, "this is not a misprint", they are not cheap, they are a rare collectors item, if you can find one for less money then grab it quick.
Interested parties can send me an email and I will forward your information to the seller. You can work out the details with him. Good luck!
The bad news is we ran out of one of our most popular air pistols, the Cybergun Tanfoglio Witness 1911, but the good news is you can preorder one right now and save $20! We have an expected arrival date of mid July but this is not written in stone as there are things we juts have no control over in this crazy world we live in... What I can tell you is that if you don't order now and wait for them when they come in, we might already be sold out and if you do get one you will pay $20 more than you needed to!
If you live in the US we are also expecting stock to arrive right around mid July so hang on and yes you can now preorder one also...
Right off the bat I have to say I had a great time making this Field Test Video Review of the RAP4 RAM X50 (Sig P226) .43 Caliber Blowback Paintball Pistol. I did something I don't generally do, I went back into my forest area of the property and setup some human sized targets (5 gallon buckets) and did some tactical real world shooting simulation, it was a lot of fun and the RAP4 RAM X50 Paintball Pistol worked perfectly for this as I could very easily see exactly where I was shooting and also did not have to worry too much about rebounding ammo.
This video only covers the shooting performance of the RAP4 RAM X50, so checkout my Table Top Review for things like the Specifications and Features.
In this video I start out by doing a Chronograph Test and shoot not only Paintball rounds but also some Rubber bullet and got very good average FPS results using both ammo types (288 fps using .43 caliber Rubber Balls and 279 fps using .42 caliber Paintballs).
I also tested the accuracy out from 20 feet away in a semi rested position and got about an 8 inch group with a full 9 round magazine, which on a human sized target would do the trick for sure. Keep in mind this is not a target pistol! My Tactical Field or should I say "Forest test", showed that this paintball pistol performs very well when used in a simulated shooting scenario.
I can really see a use for a gun like this, mainly for training oneself on how to acquire targets quickly and how to improve your tactical shooting skills.
Action: Semi auto, single & double action with blowback.
Ammunition Type: .43 caliber paintball or rubber bullet.
Ammunition Capacity: 9 round magazine.
FPS: 250-300fps.
Trigger Pull: The trigger pull on the Real Action Paintball RAP4 X50 is rather nice, being a true blowback action gun, the cycling of the slide not only chambers a round but also pre-cocks the hammer allowing for a very smooth and light trigger pull in single action mode. There is also a de-cocker that allows you to release the hammer without activating the firing pin and placing the hammer in a half cock position rested about 2mm off the firing pin.
Accuracy: I did not expect amazing result with The RAM X50 Paintball Pistol in my preliminary testing as it does use rather light weight and fairly small caliber Paintballs that will be susceptible to wind gusts and the seems on them will make them a bit more turbulent than a standard Pellet, BB or Airsoft round. Even so I was able to hit pretty much any moderate sized target I shot at and I would assume in a battle situation I could place most shots on a human sized target fairly well as along as I was not too panic stricken ;)
Build Quality: The RAP4 RAM X50 Sig Sauer P226 styled Pistol is built very well, it does have a polymer frame but the gun overall has lots of metal parts and a very good overall 2.2 pounds weight to it dry. The blowback action is very snappy and all the mechanics and fit and finish all look and function very nicely. The only function that was not working on my "used" gun was the slide catching on the last round. I have not looked into it too much to see what may be the problem but I can see some wear on the catch area of the slide that may be causing it. I have no idea how the previous owners may have cared for this Paintball gun but overall it is in good condition.
Realism:The RAP4 RAM X50 was primarily made to simulate real word shooting environments for Police and Military users and even though it is not branded and licensed as such, it is a bang on copy of a Sig Sauer P226 Semi Auto Pistol. Other than the exception of the CO2 Cylinder hanging a bit far out of the bottom of the handle, The RAM X50 would be hard to tell from the Real Steel Sig Sauer P226, especially when looking down the large .43 caliber barrel. The Blowback action and firm recoil help pull off the believability when shooting this Paintball Pistol.
Everything works pretty much like the real gun so a great training tool.
Fairly affordable in the US adn Canada.
Seemed to have Decent accuracy, decent amount of shots, about 3-4 good magazines
Nice light single action trigger.
Cons:
CO2 cylinder sticks out from the handle and looks a bit odd.
My slide does not lock back after the last shot, may be a potential wear problem?
Does not field Strip conventionally.
Comments:
I have had my eye on this paintball pistol for some time now, the first time I saw it, it was behind the counter in a Paintball store and generally in Canada they sell in retail shops for about $450+ so I have kind of been holding off to see if it woudl come my way a bit more affordably. The time came when I was able to leverage another sought after item I had and I was able to add this gun to my collection. I found that it shoots much like many of my other blowback airguns but perhaps with a bit more force than most. Shooting at targets 20-40 feet away was easy and the Paintball's had no problems breaking on contact with most medium to hard objects. I normally would not have a need for Paintball pistol but heck, why not if it looks this good and next time I go out to a paintball battle, I will have a surprise waiting for when I run out of rifle ammo or need to work in some close combat situations...
Some more updates for you, I received some more NcSTAR Accessories for my Canada Replica Airguns Store, some Red Dots, Scopes, Lasers, Tactical Lights, Rails, Bipods and some Vests, Slings and Holsters. I will be updating the Canada Store shortly with these very well priced items shortly so check back soon!
I also have a couple more blank guns that I will be conducting a Silent Auction on shortly: An EKOL Lady in Satin and an EKOL Special 99 in "White", which is more like a soft textured Nickel.
Lastly I also just picked up my first paintball pistol a RAM X50 and it is one I have been after for a while since I am a big Sig fan. It' basically an unlicensed Sig Sauer 226 that uses CO2 and chambers .43 caliber paintball and/or rubber balls. It is blowback and has a drop out 9 round metal magazine.
Trigger Pull: The trigger pull on the Daisy Powerline 5501 is about average, a bit long but fairly smooth and about a medium pull weight. The first part of the action loads a BB into the chamber and the second part releases the hammer which give the pistol a bit of a creepy first stage.
Accuracy: I was not impressed with how my Daisy 5501 performed in the accuracy portion of this review, it got about a 3 inch 8 shot group from 20 feet out in a semi rested position, in comparison many of my BB pistols can easily get a 1 inch grouping shooting this way. I may try a different brand of BB's even though the RWS BB's I used where of high quality, they just may have not suited this pistol? FPS velocities where a bit under the manufacturers claimed ratings but very close at a respectable average of 386 fps with my 8 shot test shooting on a somewhat cold day. Not bad for a blowback pistol!
Build Quality: The Daisy Powerline 5501 is a pretty much all metal pistol with what looks to be very good build quality. The 5501 is made in Japan, I have found most Japanese made guns to be well made in the past. The frame, slide, trigger, safety, slide catch, CO2 screw, and de-cocker are all metal and of course many of the internal parts too. The only plastic parts to speak of are the grips and the magazine. I would have liked to have seen the magazine with more metal in it but for the most part it is protected within the gun so you should be OK.
Realism:The Daisy Powerline 5501 is loosely styled after the Sig Sauer in combination with a Walther semi auto pistol. It is lacking a cut-out ejection port that would have added greatly to its realism. I would have also liked to have seen a metal magazine as it's seems a bit cheap compared to the rest of the pistol. I do like the fact that the barrel tip has a large diameter opening making the gun look more like the larger caliber weapon it is styled after. It's also one of the few BB pistols with a working de-coker on it.
The two-tone look is very nice with a stainless look to the frame.
Accessory rail makes adding a tactical light or laser easy.
Warning instructions on slide are color matched to be more discreet.
Very well designed CO2 tightening system and also well hidden.
Cons:
Did not shoot very accurately for me with the BB's I used.
Ejection port is not cut out, takes away from the realism a bit.
All plastic magazine.
No white dotes on rear sight.
Comments:
All in all I liked this Daisy Powerline 5501, other than the poor results I got in terms of accuracy using my chosen zinc platted RWS BB's, the Powerline 5501 was really very good in all other aspects. I think it is a rather nice looking gun with excellent build quality throughout with lots of metal giving the 5001 a nice 1.5 pounds weight. The Daisy 5501 had very heavy and snappy blowback while retaining decent shots per CO2 and respectable close to 400 fps real world velocities. This Daisy Powerline 5501 blowback BB pistol is priced at well under $100 making it very good value in my mind.
My Vimeo Video Comparison Review for the Daisy Powerline BB Pistol:
Just a quick heads up for our Canadian customers waiting on Dan Wesson Revolvers, the ASG Airguns and some Airsoft guns have now cleared customs, we still have some more Airsoft guns from ASG coming down the road but at least we have some to start with for now.
PLEASE KEEP IN MIND that we have a very large backorder list and we will be doing our best to send out the backordered Dan Wesson starting tomorrow. It will take some time to get caught up so please try to avoid sending us an email about your backordered Dan Wesson, we are working very hard to get them to all of you and will update everyone with a tracking number as soon as yours ships.
If you are interested in some of the ASG Airsoft guns then make sure to check back over the next few days as I update our Airsoft guns section or our Canada Replica Airguns Store with the new ASG Airsoft items.
We have been waiting a while here in Canada for some of our ASG products to come back in stock. ASG provides us with our Dan Wesson line and the Dan Wesson Revolvers have been a very popular airgun to say the least. We did manage to get a few of them, mainly to fill some of the earlier back orders but this big order had to come by cargo ship and now it has arrived and has been with Canada customs for about a week so we should be close to having them for you!
The hold up on this shipment is because we have some ASG Airsoft guns in with the regular Airguns which is good news as we will soon be stocking some very nice ASG Airsoft Pistols and Rifles but the new Airsoft guns are the main reason that Canada Customs is taking their time giving their OK on this shipment.
My advice to anyone who has been waiting a long time for their Dan Wesson Revolver (Mostly the 2.5 & 4 inch versions) is to hold on a bit longer because the wait is almost over and we will sell out of these guns quickly so having your backorder in guarantees you will get yours.
It's always good to start the week off with an update video so everyone knows what's happening short-term and long-term...
I recently acquired a couple new items that I will be reviewing in the near future (along with several other reviews that I will be trying to get to ASAP!) First off is the Crosman M4-177 which is basically a multi-pump pellet and BB shooting replica of an AR or M4 styled carbine used by the US military. The Crosman M4-177 is mostly plastic on the outside but on first inspection seems to be built fairly well. It has removable metal sights and the magazine is also detachable but is not used as a magazine but rather a compartment for storage. The unit I have is the Canadian detuned version which shoots .177 caliber lead pellets and 4.5mm steel BB's at under 500 fps.
I also received my first old west blank shooting revolver (M1873), I have wanted one of these for a while and finally got my hands on one :) Unfortunately this one has a plugged barrel so it vents out of the cylinder area which may get a bit messy. I may see about making this one a front venting gun if possible and of course as long as it's within the law as I plan to make sure the cylinder stays semi plugged so no actual rounds could ever be shot out of it. The Old West M1873 Blank Revolver holds six .380 crimped blanks and is an all metal and wood construction. This should be a fun review!
I also touch upon a few other guns on the list of items I need to review and by the way in an attempt to get caught up I will be doing my Table Top and Shooting reviews combined.
Here are some of the guns that I will be reviewing over the next while...
Gamo P-25 & PT-85 .177 Caliber Blowback Pellet pistols (This one will get done this week!)
