Related Posts:
Here's a quick YouTube video of the Zoraki M906 P.A.K. Blank pistol firing off some blank rounds. I fire off 6 semi-auto rounds which by the way is the magazines maximum capacity! I also capture the test fire using my Canon High Speed Slow Motion camera in 210 frames per second mode to really slow down the action and see how this small blank shooter cycles rounds.
My YouTube Shooting Review for the Zoraki MOD 925 Blank Gun:
Related Posts:
"Before you attempt to do this modification you need to be aware that it may void your warrantee and/or you may fail and either break something or incorrectly reassemble your Mini UZI rendering it "Broked"! This is your problem so please do not attempt this modification (even though it is fairly easy to do) unless you're 100% confident you can do it and are aware of the possible consequences. Make sure to also take into account any gun laws in your area prohibiting full-auto capable firearms!"
(Special thanks to Herman for showing me the ropes on this modification)
This modification will make your semi-auto "only" Cybergun/KWC Mini UZI BB Gun into a full auto capable 4.5mm BB machine gun. From the factory the full auto switch position (Far Left "A") is disabled but the full auto selector position is visible. The actual full-auto functionality is still present in the Mini UZI but has been decommissioned by the simple means of blocking the selector switch from being moved to the far left full-auto or "A" position.
This full auto modification will show you how to disassemble the Cybergun - KWC Mini UZI BB Gun and remove the small plastic selector switch blockage so you will be able to manually switch between semi auto and full auto modes. This modification takes about 15 minutes to complete.
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
You will need the following tools: A pair of pliers and either a pair of small wire cutters or a file.
Let's begin! Below are the two pre-modification positions available from the factory:
"S - SAFE"
"R - SEMI AUTO"
Below is a closeup of the top bolt cover that we will be removing to access the internal bolt for removal:
In the next photo we have removed the bolt cover by pressing the "angled button" towards the rear sight:
And now the bolt is removed:
I removed the grips but this is not necessary:
Now you will need to remove the lower receiver pin located at the back end of the receiver closest to the grip safety. Use a pair of pliers to pinch the metal pin while pushing it through. Once the pin is started you can use the pliers on the other side to pull the pin all the way out. You may need to us a fair amount of force to do this as the fit of the pin is tight:
Once the pin is removed the lower receiver can be detached:
You can see in the picture below the small plastic nub that we will need to remove in order to restore full-auto capability:
I used a pair of small wire cutters to clip this plastic nub off, but you could use a file too. Just make sure that the plastic is flush and does not have any burs or protrusions.
Below is a photo of the Plastic Nub removed from another angle:
After that, all you need to do is reassemble you Mini UZI in revers order to finnish the Full Auto modification.
In the below Photos you can see we have restored the ability to move the fire selector switch over to the "Far Left" or "A" position, reenabling the Cybergun - KWC Mini UZI BB Gun to shoot in full auto when desired.
"A - FULL AUTO"
Now enjoy your Cybergun - KWC Mini UZI BB Gun in full-auto as it was originally designed!
Here is my Vimeo Video in Narrative with Photos:
Related Posts:
Type: BB air pistol.
Manufacturer: Cybergun.
Model: Mini UZU.
Materials: Metal and Polymer.
Weight: 4.8 pounds.
Barrel: Metal, non-rifled.
Propulsion: CO2 x1.
Action: Semi auto (Selectable Full Auto with Mod) blowback, single action only.
Ammunition Type: Steel BBs 4.5mm.
Ammunition Capacity: 25 rounds
FPS: 344
Trigger Pull: The trigger pull is very light with an easy break.
Accuracy: Very good, even with all the heavy blowback recoil!
Build Quality: Excellent, with a good amount of metal construction, good weight and craftsmanship with good fit and finish. Much of the gun is made out of metal with the exception of some of the outer receiver and grips.
Realism: This is a very close replica of the actual real steel with many of the same markings in all the right places, It's hard to find any real differences other than the fact that it shoots 4.5mm BB's and has a bit more plastic.
Pros:
Extremely realistic airgun replica of the Mini UZI.
Metal construction where it counts.
Would make an excellent training gun as it functions just like a real Mini UZI.
Blowback action is incredibly firm (more than a rimfire 22 cal.) adding to the realism of shooting this weapon.
Can be easily field striped.
Can be easily modified to fire in either Semi Auto or Full Auto by removing one small plastic blockage.
Adjustable sights.
Very useful metal folding stock.
Cons:
It goes through CO2 very fast.
When the magazine is empty, the slide bolt does not stay open and the gun will continue to fire waisting CO2.
Some of the outer materials are plastic, would have been nice if they too where metal construction.
Comments:
This is a really nice blowback BB gun. Although it is advertised on many websites as being all metal, it does have some plastic outer parts, but the parts that get the most wear and tear are made out of metal. That aside, the Cybergun Mini UZI is pretty much an exact copy of the real Mini UZI with many of the same markings as the original. One feature that makes it feel even more genuine is the very heavy blow back recoil, it is alarming at first and I would even say it has more recoil than a rimfire 22 cal. gun does. It only comes in a semi auto version but all Cybergun did to inhibit full auto mode was to simply add a plastic nub that stops the fire selector switch from being selected to full auto. Once this plastic nub is removed, full auto mode is resorted. This well made BB gun is a bit pricy but you get a lot of gun for your money!
Related Posts:
Type: Blank Gun.
Manufacturer: Zoraki - Atak Arms.
Model:Zoraki M906.
Materials: Metal & Polymere.
Weight: .9 pounds.
Barrel: Semi plugged - front firing.
Propulsion: Gun powder.
Action: Single action.
Ammunition Type: 9mm P.A.K.
Ammunition Capacity: 6 round magazine.
FPS: N/A.
Trigger Pull: The trigger pull is short and smooth, typical of a semi auto action.
Accuracy: NA.
Build Quality: The overall build quality of this gun is awesome. The design and materials all seem to be of good quality. After I received my Zoraki Mod.925 and saw how well ATAK Arms made it's polymer components, I was actually expecting the M906 to be as good if not better. I was not disappointed! ATAK Arms put excellent thought into using metal and polymer materials to their full advantage, making the frame and handle out of polymer and where it really counts, metals are used; Slide, Barrel, and most other mechanical parts. The slide feels as well made as you would find in an actual firearm. The overall quality is that of an actual Firearm!
Realism: This gun is not supposed to be a replica of any gun in production but it does look like a shrunken down Sig Sauer in some ways and hey I love the Sigs. The Zoraki M906 looks and feels like a real gun, always make sure to take precautions when using this realistic looking blank shooter!
Purchased From:VinzerSports.com.
Pros:
In Canada it is one of the few blank guns available for purchase that is not prohibited.
Excellent construction, great usage of metal and polymer materials.
Well priced for an extremely high quality blank gun.
Very compact in every aspect, great for conceal carry purposes (Check your areas laws).
Well thought out modern design.
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
Cons:
Not as readily available in Canada, the US and other areas..
9mm P.A.K. Blank ammo is expensive.
Limited ammunition capacity.
Comments:
The Zoraki M906 is well thought out, well built, and well priced! What more do I need to say? If you want an extremely compact modern looking blank shooter, then make sure to consider this ATAK Arms 9mm P.A.K. blank gun. It immediately became my favorite gun in my blank collection.
My table top Vimeo Video Review for the Zoraki M906 Blank Gun:
Related Posts:
I have been holding off and holding off on this gun for a while now but I just can't wait any longer! So today I finally ordered up a Full Metal UZI Blowback CO2 .177 BB Gun from the Air Gun Source here in Canada.
I'm not 100% sure who makes this full metal replica UZI BB gun but I believe it may be the Cybergun version. There seems to be identical version distributed by "Armist Industries" and "KWC", when it comes I should have more info about it. This UZI is stated to be "Full Metal" but I have heard conflicting stores and again when I get it I will update you on the quality of this nice UZI Blowback BB Gun.
These guns ship with a selector switch that has three positions: (A-R-S), one is the safety and the other two are semi-auto only. This gun does not ship with a full-auto feature but I have a source who has converted his to full auto and he is sharing this information with me shortly. I plan to mod mine so it has a selectable semi auto and full auto.
This gun is reported to have a very heavy blow back action with significant shoulder kick for a BB gun. Sounds like fun! It has also been chronographed at 390 FPS! And it even comes with a folding Stock.
Here are some basic stats for you until I do my full review...
Related Posts:
I couldn't help myself, I have all the Zoraki Blank Guns except for the latest Zoraki M906. This is Atak Arms most compact blank gun and it's even smaller than the Zoraki Mod.914. It does come at a bit of an ammo capacity cost as the M906 can only hold 6 rounds due to its shorter and thinner handle.
The Zoraki M906 appears to have more usage of composite component, so it should be a very light gun. It also has a more traditional design than Zoraki's other automatic blank shooter.
I'm looking forward to receiving my new addition some time late next week...
Related Posts:
Here's a quick Vimeo video of the Zoraki Mod. 925 P.A.K. Blank pistol firing off some blank rounds. First I shoot two rounds off in semi-auto mode and then switch the Zoraki 925 over to full-auto and fire off the last 10. The Magazine I used is capable of holding 26 rounds but hey, that would have been about the equivalent in cost to 4 Starbucks Mochas!
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
My Vimeo Video Shooting Review for the Zoraki MOD 925 Blank Gun:
Related Posts:
I've already done a review of the Non-Tactical Umarex PX4 Storm CO2 Blowback Pellet-BB Airgun so make sure to read up on it and also checkout my YouTube Video Review.
This post/video is mainly just to show you what the differences are between the Tactical Recon Version and Non-Tactical versions of the PX4 Storm and talk a little about the added accessories included in the Tactical version.
The base gun is literally exactly the same except for the two-tone coloration on the Tactical version. The Tactical version obviously comes with the addition of several accessories which makes it the "Tactical Model".
Firstly, there is the addition of the Suppressor. With an airgun, usually a suppressor is mainly for show as sound level is not often an issue! That said, an airgun can benefit from a suppressor in one big way - a longer barrel meaning more FPS. Unfortunately Umarex did not take advantage of adding barrel length to the PX4 Tactical model and I'm not really sure why? Even with a longer barrel I double that the PX4 Storm would exceed 500 FPS excluding it from the Canadian market. That's just my two cents on the suppressor but on a good note it seems to be all metal and well built.
There is also the addition of a "Tactical Bridge Mount" that allows you to add more accessories than just the under barrel ones available to the Non-Tactical version. The Tactical Bridge Mount actually gives you four location to mount more accessories - (bottom, top and both sides). The Tactical Bridge Mount is not the most ridged of mounts but it does the job and because it is more flexiable it may be less prone to breakage in a fall.
Umarex takes advantage of these rail locations by including a Red-Dot scope on the top and a Tactical Light on the left side. The Red-Dot scope is decent but there is room for improvement as it's fairly entry level. The Walther Tactical Light on the other hand is very nice and comes with a pressure sensitive thumb grip switch.
All in all you will pay about double for the PX4 Storm Recon over the basic PX4 Storm but it does make for an intimidating looking hand gun especially if you're into that tactical look!
Related Posts:
Type: Blank Gun.
Manufacturer: Zoraki - Atak Arms.
Model:Zoraki MOD 925.
Materials: Metal, Polymere shell.
Weight: 1.8 pounds.
Barrel: Semi plugged - front firing.
Propulsion: Gun powder.
Action: Single action.
Ammunition Type: 9mm P.A.K.
Ammunition Capacity: 16/26 rounds (magazine dependent).
FPS: N/A.
Trigger Pull: The trigger pull is short and smooth, typical of a semi auto action.
Accuracy: NA.
Build Quality: The overall build quality of this gun is excellent. The design and materials all seem to be of good quality. I was actually not expecting this gun to be as well built and finished as it was. Inside it has a metal frame based on the MOD 914 Zaraki with an exo-shell made of a polymer type material. It also comes in a very nice hard shell case with cut outs for everything included. (The Zoraki MOD 925 blank gun, 16 round and 26 round extended magazine, cleaning rod, oil bottle, alternate barrel tip, barrel changing tool, and flare adaptor)
Realism: This gun is not supposed to be a replica of any gun in production but it does look a bit like a mini sub machine pistol. The Zoraki 925 looks and feels like a real gun, so make sure to take precautions when using this blank mini machine gun!
Purchased From:CanadaAmmo.com.
Pros:
In Canada it is one of the few blank guns available for purchase that is not prohibited.
Excellent construction, all metal internal frame with high quality external polymer shell.
Well priced for what you get even at the newer higher pricing.
Magazines interchangeable with the Zoraki MOD 914.
Come with a very nice hard shell case and accessory package.
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
Cons:
Not as readily available in Canada, the US and other areas..
9mm P.A.K. Blank ammo is expensive.
Comments:
The Zoraki MOD 925 is a sweet full auto machine pistol and if you can find one is a great addition to anyone blank gun collection. When compared to other full auto blank firing machine guns or pistols (Voltran Ekol UZI 9mm P.A.K. Blank Gun / Voltran Jackal air pistol) it is well priced but does not sacrifice in quality!
My table top Vimeo Video Review for the Zoraki MOD 925 Blank Gun:
Related Posts:
Type: BB spring air rifle.
Manufacturer: Crosman.
Model:Marlin Cowboy.
Materials: Mostly metal and wood.
Weight: 2.75 pounds.
Barrel: Smooth bore.
Propulsion: Spring.
Action: Lever action.
Ammunition Type: Steel BBs 4.5mm.
Ammunition Capacity: 700 rounds.
FPS: Up-to 350.
Trigger Pull: The trigger pull is pretty good, not super light but predictable.
Accuracy: About as good as you can expect from a kids sub $50 BB gun with a non-rifled barrel, it was actually better than I thought it would be. I did experience some flyer BB's, which may have been due to the gun not being broken in yet.
Build Quality: When you pay under $50 for a BB gun you don't expect the build quality to be over the top but this little BB rifle is actually pretty nice! It's almost entirely made out of metal and wood, even the lever is made out of metal unlike its competition the Daisy Red Ryder BB Gun. The only plastic I found was the trigger, safety and front sight assembly.
Realism: Even though this BB gun is styled after the Original 1984 Marlin Cowboy, it's not a close replica. You have to keep in mind the purpose of this gun - meant primarily for young first time shooters. For its intent and purpose it does look really nice and if I was a youngster receiving this gun on a birthday or as a Christmas present, I probably wouldn't get much sleep thinking about shooting this gun.
Purchased From: Wholesale Sports Outdoor Outfitters.
Pros:
Inexpensive introduction to the sport of Airgun shooting.
Made out of Mostly Metal and Wood - Including the Lever.
Large capacity internal barrel magazine (700 rounds).
Adjustable rear sight.
Decent 350 fps velocity.
20 pound lever action pull adding a level of safety to the over enthusiastic young shooter.
Cons:
Plastic trigger, safety and front sight assembly.
Very small trigger hole - if you are an adult shooter and have thick fingers (Didn't bother me)!.
Comments:
I think this is a wonderful little BB rifle and even though it's intended for the young entry level shooter it can make a great back yard plinker that anyone can join in and enjoy - adults included! The gold standard is the Daisy Red Ryder type BB, the Crosman Marlin Cowboy BB rifle is a nice addition to this market and is definitely a contender to think about.
I had an idea the other day, Since I have all these Replica Guns and just about any TV show, Movie or even Internet Video that uses guns is going to need guns that look real, why not put my Replica Guns along with myself up for hire!
The first thing one must do with an idea like this is a bit of research to make sure there aren't any major road blocks like the law, and getting thrown in jail, so I called my local RCMP Chief Firearms Officer and we had a talk. Long story short, if I can buy the guns I'm going to be using without a firearms license, then I don't need a Business Firearms License to use my guns on set.
What most large budget TV and Film productions do is a hire a "Gun Wrangler" who is authorized to transport and supervise real steel guns on set - Very Expensive!!!
So with my much lower overhead and next to no red tape I can now offer a large and growing assortment of Replica guns for use on set in TV and Film. Right now I am only offering this in Canada, in the Vancouver and lower mainland areas.
So if you need guns for your TV, Film or Movie - You know who to call - Click on the link for more info on TV, Movie & Film Prop Guns For Hire!
I just noticed that you can get Bulk Air-CO2 Adaptors on Amazon via a company called "Air Venturi". They have them for the Steel Storm, the Drozd and the Blackbird. The Blackbird one actually doubles as a stock mount for your CO2 or Bulk Air Tank.
Related Posts:
That was fast shipping, it only took one day from when it left CanadaAmmo.com to arrive, not bad for free shipping!
I also got a couple of boxes of Fiocchi 9mm P.A.K. Blanks as theses full auto blank guns eat up the ammo fast and at $29 bucks for a box of 50 it ain't cheap!
The Zoraki 925 came in a very nice plastic box with cut out foam sections for each accessory.
The shorter 16 round magazine was inside the blank gun and the longer 26 round magazine was in a foam cut out in the case. Also included was an alternate barrel adaptor (longer barrel), flare adaptor, cleaning brush, oil container and a tool for swapping the alternate barrels ends. (The short barrel end I left on the gun out of personal preference)
And of course there was a manual with instructions on what to do and most importantly, what not to do!
The Zoraki 925 was surprisingly much nicer than I thought it would be, maybe a bit smaller. I had the impression that it would be a lot larger than my Zoraki 914 but it really was only marginally larger.
The cool part is that both the magazine from my Zoraki 925 also fit into my Zoraki 914 making it an even smaller 26 round full auto machine gun! Maybe not quite as mean looking as the 925?
The quality of the Zoraki 925 is amazing when considering the price! The polymer shell looks flawless and feels very durable, the mechanics of the gun feel tight and snappy with an overall solid feel probably because the polymer shell only covers the metal internal of what is nearly a complete simplified version of the 914 model.
The operation of the Zoraki 925 is very similar to the 914 with the exceptions of the ejection port cover which snaps open when you pull the slide lever back or pull the trigger. The mechanics of pulling the slide back is also different as the internal slide is not accessible from the outside, so you need to pull back on a slide lever located at the back of the gun.
The Zoraki 925 blank gun is definitely one of my favorite blank guns, I imagine it will shoot just like my 914 but I look forward to giving it a go anyways.
Look forward to my table top YouTube review shortly and when I feel like making some noise I will also do a shooting YouTube video of the Zoraki 914 rip'n it up...
Related Posts:
I purchased a Zoraki 925 Deluxe Blank Gun back in late September on a pre-order from CanadaAmmo.com and have been waiting patiently for stock to arrive! Well it finally happened and my Zoraki 925 "Deluxe" is now officially on its way. The last order I received from CanadaAmmo only took two days to arrive as they are located very near to where I live.
Zoraki guns are starting to get a bit harder to buy in Canada and if you can find one it will probably be a bit more expensive now as the Zoraki line distribution channel has changed effectively increased the cost. I paid just under $150 for my 925 Deluxe model including shipping and taxes which is a great deal! The difference between the deluxe model and regular 925 is that the deluxe version comes with two magazines: a shorter 14 round mag and a longer 25 round magazine. I believe the deluxe version also has a nicer hard shell case with cut-outs for the gun, extra mag and accessories.
The Zoraki 925 is based on a simplified 914 9mm P.A.K. blank gun but has a polymer shell around it making it look a bit like a mini UZI. It also is capable of shooting in semi or full auto and a nice little bonus is that the magazines are interchangeable.
Here is a little bit of trivia on the Zoraki 925 - it was used in the movie Universal Soldier: Regeneration by Jean-Claude Van Damme in a few of the carnage scenes. Hey, if it's good enough for JCVD, it's good enough for me!
I can hardly wait for it to get here and of course I will be doing a review and shooting test to follow...
Related Posts:
I wasn't planning on buying a BB Air Gun today but I walked into my local Wholesale Sports Outdoor Outfitters and was expecting to see absolutely no airguns and/or airgun supplies but to my amazement they had an entire plethora of air powered weaponry on display. They went from literally nothing to a very decent assortment in about a week. Kudos to them!
So back to the Marlin Cowboy Lever Action BB Gun... I have been reading up on this nice little entry level BB rifle a bit recently as it only became available from Crosman in September of this year, so when I saw it there in the showcase for a measly $43.99 Canadian, I was a bit surprised. It has always been in my plan to pick up a Red Ryder type BB rifle for my son and I was in no hurry because he is only 3 1/2 years old but hey, why not pick one up now and when he's old enough I'll pass it on to him!
So why did I go for the Crosman over the Daisy? There's not a huge difference but I liked the look of the Crosman Marlin Cowboy over the Dasiy Red Ryder and also the fact that the Marlin Cowboy has more metal specifically the Lever is made out of metal where as the Red Ryder has a plastic lever.
The Crosman Marlin Cowboy is a replica or should I say styled after the Marlin Model 1984 Cowboy, as far as being an accurate replica... that's not really the purpose of this little BB gun. It's intended as an introduction to the world of shooting for kids and so it's pretty durable, cheap and far from over powered. The Marlin Cowboy is spring powered via the 20 pound pull lever action (May need an adult to do this adding another level of safety) and has an fps of up to 350. It holds up to 700 4.5mm steel BB's within the internal gravity fed barrel magazine and also has an adjustable rear sight. The barrel is not rifled as is with most BB guns.
I gave it a quick trial test, firing off about 50 BB's, some at miscellaneous cans and plastic items, and then 15 rounds at a target to get an idea of the accuracy. Even with its minimal fps, the Marlin Cowboy sends cans and small items flying with a nice cracking sound. I was fairly impressed with the grouping I got (about 2 inches from about 15 feet out), but I did get a few rouge BB's that for some reason liked to veer high and to the left. This is probably due to the gun not being broken-in yet and having metal and oil bits clinging on to some of the BB's. Also the gravity fed BB's require a bit of trial and error figuring out the best way to hold and cock the gun to ensure the least amount of misfires.
Overall the Crosman Marlin Cowboy Lever Action BB Rifle was very fun to shoot and the small interruptions when engaging the lever action made it that much more enjoyable!
Related Posts:
One of my viewers (Lee) sent me some pictures of their Cybergun Sig Sauer X-Five BB gun that he stripped down to the bare metal. His had some of the paint flake off so he decided to take it down to bare metal. It looks pretty good and he says with some of his "secret" metal oil on it, it stays rust free.
Here are some picts of it:
Related Posts:
Below is my Vimeo Video of the Zoraki Mod.914, Zoraki Mod.R1 (2.5) and Kimar Lady K Blank
Guns. I fire 9mm and 8mm P.A.K blank ammunition through these guns and even show off the Zoraki Mod.914 in full auto firing mode. In the Vimeo Videos I also slow down the video to one-quarter speed so you can really see the action of these blank guns.
Zoraki Mod.914
9mm P.A.K. Ammunition
14 Round Magazine
Semi & Full Auto Modes
Front Muzzle Firing
Zoraki Mod. R1
9mm P.A.K. Ammunition
6 Round Capacity
Single & Double Action
Front Muzzle Firing
Kimar Lady K
8mm P.A.K. Ammunition
6 Round Magazine
Semi Auto Only
Top Muzzle Firing
Here is the Vimeo Video of my Zoraki 914, R1 and Kimar Lady K Blank Gun Test Firing:
Type: BB air pistol.
Manufacturer:Umarex.
Model:CP99 Compact.
Materials: Metal slide, composite frame.
Weight: 1.6 pounds.
Barrel: 3.5 inches, non-rifled.
Propulsion: CO2 x 1.
Action: Semi auto, blowback, single action only.
Ammunition Type: Steel BBs 4.5mm.
Ammunition Capacity: 18 rounds.
FPS: 345.
Trigger Pull: The trigger pull on the Umarex CP99 Compact is amazing, it is short and light making it one of the best action shooters I own. You can fire this gun accurately and fast all day long.
Accuracy: Good, I find the sights on the CP99 Compact set up to work really well with my shooting style. I don't have to make any adjustments and I'm able to get tight groups even when shooting fairly quickly.
Build Quality: Excellent, this BB gun is made in Japan and it shows, I have owned it for close to 5 years now and it still shoots just as good as the day I bought it. It's well made, well finished and feels great in the hand.
Realism: This Replica BB gun has many of the same characteristics of the actual 9mm P99 Compact with the exception of having a longer handle and much different safety mechanism. My particular version did not have a cut out ejection port either but I believe the newer models do have cut out ejection ports adding to the realism of this replica CP99 Compact BB gun.
Available at: the Replica Airguns Store.
Pros:
Decent reproduction of the original Walther P99 Compact 9mm.
Would make an excellent training gun as it has a similar size, weight, and feel to the actual Walther P99 Compact 9mm handgun.
Blowback action is very firm adding to the realism of shooting this weapon.
Decent FPS and CO2 efficiency for a blowback BB air gun.
Amazing trigger pull making it a blast to shoot.
Picatinny rail for accessories like a laser sight and/or tactical light.
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
Cons:
Ejection port on older models is not cut out but rather molded into the slide.
Safety lever seems out of place and takes away from the realism of this replica.
Comments:
This fine Blowback BB gun was the airgun that got me back to being interested in Replica Airguns. I've put thousands of rounds through this BB gun and it hasn't always been treated with the greatest care, but still it has held up very well. The Umarex Walther CP99 Compact a really fun gun to shoot and is not only easy on the pocket book to purchase but also to shoot, as it easily gets 100 shots plus per CO2 cartridge.
My Vimeo Video Review for this Airgun:
You may be surprised to know that the Airgun that started off my collection was purchased only about 4 years ago. As a kid I had a few Airguns growing up and then suddenly in my late 30's I just picked it up again. Anyways the Airgun this post is focusing on is the Umarex Walther CP99 Compact. This post is not intended to be a review but in summary the CP99 Compact BB Blowback BB gun has one of the nicest trigger pulls in my collection. It is so much fun to shoot, it's very well made and is reasonably priced.
The one feature,or lack of a feature that I never really like about the Umarex CP99 Compact was the molded ejection port. In other words the ejection port is not cut out of the slide on this gun but instead is molded into the slide to look like an ejection port.
That said I have noticed a few of these Umarex CP99 Compacts sporting a cut out ejection port and so I thought to myself that maybe people have been cutting the ejection port out themselves? Hey I thought about giving it a try several times myself. So I took a walk over to the Umarex US website and low and behold if you click on the 360 view, you will see that it too has a cut out ejection port. The photos on their site do not show this new feature but rather the older molded version. I can not confirm that all new CP99 Compacts will in fact have the cut out ejection port, but it does look like Umarex has moved to this updated version…
So I thought enough is enough! It's time to pull out my tools and cut into my beloved CP99 BB gun. The best way to show you what transpired next is with a series of photos. At the end of about 2 hours of work I have to say I am very happy with the end result!
Related Posts:
Type: Blank Gun.
Manufacturer: Zoraki - Atak Arms.
Model:Zoraki R1 2.5.
Materials: All metal with plastic grips.
Weight: 1.7 pounds.
Barrel: 2.5 inches, semi plugged - front firing.
Propulsion: Gun powder.
Action: Single and double action.
Ammunition Type: 9mm P.A.K. or 380 R Blanks.
Ammunition Capacity: 6 rounds.
FPS: N/A.
Trigger Pull: The trigger pull is good overall, even in double action mode it is smooth and not too heavy, in single action mode it is even lighter and shorter.
Accuracy: NA.
Build Quality: The overall build quality of this gun is very good. The design and materials all seem to be good quality. The cosmetics look good but when closely inspected there are small imperfections such as tool marks and some finishing blemishes. Not a big deal but if you are picky about this kind of thing then it may turn you off a bit.
Realism: This gun in theory is not supposed to be a replica of any gun in production but it does resemble many common snub nosed revolvers available such as the Rossi Snub Nosed Revolvers. It would be hard to tell the difference between the Zoraki R1 and a real snub nosed revolver even side by side. The only real tell tale sign would be if you looked at the front of the cylinder, you may notice the front bullet ports are smaller than they should be, more like a 22 caliber. The Zoraki looks and feels like a real gun, so make sure to take precautions when using this blank revolver!
Purchased From:CanadaAmmo.com.
Pros:
In Canada it is one of the few Blank guns available for purchase that is not prohibited.
All metal construction, with the exception of the grips.
Attractive styling, many finishing options available.
Well priced.
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
Cons:
Finishing detail could be better.
Pistol grips are hard plastic, would be better in rubber.
9mm P.A.K. Blank ammo is expensive.
Comments:
The Zoraki R1 (2.5) is a nice addition to my Replica gun collection, if you are a Canadian then there are few options available to us if you want to legally own a Blank shooter. I do like the look of this Zoraki snub nosed revolver, especially in the two-tone configuration that I purchased. I'm not sure of the availability of Zoraki gun in other parts of the world but in the US there is another Snub Nosed Revolver that is virtually identical, made by the company Viper for about $99.
My Vimeo Video Review for this Airgun:
