Can I use Airsoft BB's in my BB Pistol? I would have to say this is by far the number one question I get asked in the comments section of my Vimeo videos. I have made several videos where this question gets addressed within the video but so far to date I have not made a stand alone video just covering Airsoft BB use in BB Guns.
So here it is, and now I have a video I can link to this so very common question, if you where wondering about this yourself than please watch my YouTube Video on this topic as it goes into a fair amount of detail about it.
The short answer to this question is no, you can not use 6mm Airsoft BB's in a 4.5mm Steel BB Pistol or Rifle. For the simple reason that 6mm is larger than 4.5mm and so the physical diameter of a6mm Plastic Airsoft BB is just to large to fit inside of a 4.5mm Steel BB magazine or barrel.
People have commented about using a 4.5mm plastic Airsoft BB in a 4.5mm BB gun and yes this could in theory be an option but I discuss why I feel this is not a good idea based on size and mass.
With the popularity of the KWC - Cybergun 1911 Blowback CO2 Pistols and how super realistic they are in so many ways, it is no surprise that people often ask me if they can replace the original grips with grips made for a real 1911.
The short answer is yes you can! You will have to be prepared to remove just a little bit of material from the backside of both grips near the bottom of the handle where there is an area that has been flared out to accommodate the CO2. Not really a big deal, you can use a Dremel for the quick and easy approach or even some sand paper if you don't mind taking a little more time.
I'm getting close to uploading 600 videos now over on the Replica Airguns Vimeo channel, so there are bound to be a lot of similar questions and popular discussions. In this Replica Airguns Vimeo Video I address what I feel are my Top 10 Most Common Airgun Questions and Discussions.
Trigger Pull: The trigger on the G&G GR14 Type 57 R.O.C. is like most AEG Airsoft Rifles, being that it is essentially an electric on off switch and not a mechanical one. So it is light with not much take up. You will notice a bit of delay from the time your press the trigger till a BB is released since the electric motor must first pull back the spring and release it.
Accuracy: So far I have not tested out the G&G GR14 AEG Type 57 R.O.C. Walnut Wood Stock Airsoft Rifle. When I get the chance, I will have to set my paper target up further out than my usual 30 feet! I am also expecting the fps to be a bit higher than the stated factory default since this G&G GR14 AEG Airsoft Rifle is marked as being the "High Muzzle Velocity Version"! Stay tuned for my future Field Test Shooting video for the G&G GR14 AEG Type 57 R.O.C. Walnut Wood Stock Airsoft Rifle.
Build Quality: The G&G GR14 AEG Type 57 R.O.C. Walnut Wood Stock Airsoft Rifle looks to extremely well made with most of the build materials being metal and wood. The only none metal or wood noticeable parts would be the upper hand guard which is made out of some sort of nylon or plastic. I believe the original M14 Rifle upper hand guard was made out of fiberglass. Then Walnut Wood Stock is nicely finished and the metal parts function and look really great.
Realism: In terms of realism the G&G GR14 AEG Type 57 R.O.C. Walnut Wood Stock Airsoft Rifle is extremely authentic in terms of looks, weight and even overall length and barrel length! Most of the parts operate exactly as they would on the real M14 rifle including the selector switch, safety, magazine release, shoulder rest adjustable sights and bolt.
Lots of metal and wood parts where they would be on the real M14.
True realistic 9 pound weight.
High capacity magazine at 470 rounds.
Sights are adjustable for elevation and windage.
Semi and Full Auto selectable.
Real Walnut Wood Stock.
Flip up metal shoulder rest.
Engraved with "The Republic of China" Chinese Text Markings.
25000 rpm Hi-torque Long axis Motor with 7/8 mm Bearings.
8.4v Large Tamiya Battery System.
Cons:
Does not come with battery or charger.
Not setup as is for a scope.
Comments:
History of the M14 this rifle is based on - "The M14 rifle, formally the United States Rifle. M14 is an American selective fire automatic rifle firing 7.62x51mm NATO (.308 Winchester) ammunition. It was the standard issue U.S. rifle from 1959 to 1970. The M14 was used for U.S. Army and Marine Corps basic and advanced individual training and was the standard issue infantry rifle in CONUS, Europe, and South Korea, until replaced by the M16 rifle in 1970."
So the M14 has a place in our history books and also a place in many of our war veterans hearts. This G&G GR14 AEG Type 57 R.O.C. Walnut Wood Stock Airsoft Rifle replica is an excellent example of such a great piece of history, to have one in a working Airsoft version may be the next best option to having the real deal.
My YouTube Review Video of the G&G GR14 AEG Type 57 R.O.C. Walnut Wood Stock Airsoft Rifle:
Whether you like it or not, most of us have come across an Airgun with an ugly orange tip on it at some point. In most cases you will find the intrusive orange or red tips on Airsoft guns that shoot plastic BB's, in some cases you will even find them on Airguns that shoot either lead pellets and/or steel BB's.
It really comes down to where you live as to what your local gun laws have determined is required for your area. You may even live in a region where Airguns and Airsoft guns are not allowed at all! So for you a red or orange tip on the front would be welcome if it would allow you to own an Airgun or Airsoft gun. What about the entire gun being painted a bright color, well that is the case for some folks so again having a red or orange tips may not be as bad as it originally seemed...
In Canada where I live, we used to only be allowed Airsoft guns that had clear sections as our replica gun laws are very strict and all black Airsoft guns would have fallen iinto the "replica" category if they did not have large clear plastic see-through sections on them. This clear section law was revised somewhat over the last several years to allow for all black Airsoft guns here in Canada. It was determined that many Airsoft guns with higher fps limits could cause a serious injury to a human, making them less of a toy in the eyes of the law and more of a weapon. Because of this, Airsoft guns that are capable of shooting a .20 gram plastic BB at a velocity of 360 fps or "higher" are now considered to be similar in the eyes of the law to a regular steel BB or lead pellet shooting Airgun. In Canada, Pellet and Steel BB guns are actually considered firearms of a sort so this allows the higher fps Airsoft guns to be all black since it can not be a replica of a firearm if it is in fact considered to be a firearm by law.
The long and short of all of this is that here in Canada we do not require our Airsoft guns to have orange or red tips since they are considered more or less to be just like any other Airgun and our Airguns do not have red or orange tips either.
Getting back to the title of this article "No Orange Tip On Your Airsoft Gun! Are You Insane?" I often get folks from the US giving me heck for removing the orange tips from my Airsoft guns or asking me why my Airsoft guns don't have them in the first place. These people even state that I could get in a lot of trouble for this! Perhaps they think I live in the US or that US laws govern Canada as well? I am not sure but I can say for the record that I am not breaking any laws at least here in Canada where I live.
I know in the US that wholesalers and retailers by law have to sell Airsoft guns with the affixed orange tips on them, once the end user receives that gun and depending on which state they live in, it may or may not be legal to remove the orange tip. Again, you will need to look into your local state laws as they are different from state to state in the US.
In this Video Review I show you around the G&G CM16 Raider and Carbine AEG Airsoft Rifle's. Since these AEG Airsoft AR Rifles are a bit large to showcase using my traditional Table Top location I move into my gym and take each gun out of its box to have a good look at them. I talk about some of the main features and specification. The main features being these G&G CM16 AR15 / M16 AEG Airsoft Rifles are all really well priced but also very well made for their rather low overall cost. They do have a primarily all Nylon Fiber build even in the receivers but they still have a nice 4.6 to 5.7 pound weight to them, and once dressed up with a few accessories they come in at a perfect weight that is not too heavy to carry around in just about any game situation. The Nylon material in some way is a better choice in terms of getting scratched and dinged since they will not mark up as easily as painted metals will.
Ammunition Capacity: 17 round full size metal magazine.
FPS: 380 using .20 gram BB's.
This is a Mini Review for the KWC/Cybergun Colt M1911 A1 CO2 Blowback Airsoft Pistol. I have already reviewed other KWC version of this all metal realistic CO2 blowback pistol in both 6mm Airsoft and 4.5mm Steel BB and in a variety of different finishes so if you are interested in a more detailed write up for the Cybergun Colt M1911 A1, you can check out the below links where I have reviewed many variations of virtually the same blowback CO2 airgun made by KWC.
Ammunition Capacity: 15 round full size metal magazine.
FPS: 300+
Trigger Pull: The trigger pull on the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol is I would have to say one of the nicest 1911 single action triggers I have tested so far. The take-up is very slight with an extremely light trigger pull required to release the hammer. Any lighter and I would say it would be too light and perhaps prone to accidental firing.The three hole tactical trigger extends out a little further than some 1911's but feels secure on the finger.
Accuracy: At this point I have not shot the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol but have high expectations based on the overall quality of this pistol and form other reviews I have read on this Airsoft 1911 replica. According to the manufacturers claimed fps, we should get somewhere right around 300 fps. The ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol has an adjustable rear sight for windage and we can take care of elevation using the adjustable hop-up so zoning in the Socom Gear US Marine MEU SOC 1911 to shoot dead center on target should not be too difficult.
Build Quality: The ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol is one of those Airguns that really catches your eye, and once you pick it up and hold it in your hands you discover that not only does it look really great but it also feels really great in your hands! The tolerances of the parts are excellent, everything mechanical is smooth without any friction and you can even see the texture of the metal grain through the quality matt black powder finish.
Realism: The ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol is a a fantastic replica of a real steel MEU SOC 1911 used by the US Marine Corps' Marine Expeditionary Unit (MEU). The balance and weight really make this 1911 Airsoft pistol feel like your holding the real deal, all the mechanic parts function as they would compared to the original and the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol is fully field stripable.
Excellent quality, durable black powder coat matte finish .
Enhanced Pro-Grip with brass marine inserts
MEU SOC 1911 Licensed.
Three hole tactical trigger with skeleton hammer.
Comes in a hard shell case with Gemtech Outback II 5-inch silencer and lanyard.
Rail for adding accessories.
Cons:
FPS is kind of low for Canada Market so not one we can regularly get in stock.
A bit on the pricy side.
No option of CO2 magazine.
Comments:
With all the BB and Airsoft 1911's out there what makes the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol stand out from the rest. First off it feel the most believabel when holding it in your hand, it seems ot have that perfect weight and balance that is often hard to replicate in an Airgun. With features like enhanced Pro-Grips with brass marine inserts, MEU SOC 1911 licensing, three hole tactical trigger, ambidextrous safety, super smooth and light single action trigger, White dot adjustable sights and the included hard shell case with lanyard and Gemtech silencer you can not go wrong with the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol.
My Vimeo Video Review for the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol:
Trigger Pull: The trigger pull on the KWC Mac 11 M11 is double action only and is rather long and a bit firm so you will get a bit of a finger workout especially when shooting a full 39 rounds from the 4.5mm steel BB version. There is no blowback operation so this is a double action only pistol.
Accuracy: The accuracy and true feet per second performance will be tested when I do my future Field Test Shooting Review shortly (weather permitting).
Build Quality: Overall the KWC Mac 11 M11 CO2 BB - Airsoft Pistol is built fairly well as long as you don't mind the all plastic build. to be honest if you where to drop this all plastic pistol on the ground it would most likely just bounce a couple of times no worse for wear since it is kind of light weight and all. If it was an almost all metal build it would weigh in a lot more and the drop onto a hard surface could easily break the zinc alloy metal parts. That said there is some metal on the KWC Mac 11 M11 CO2 BB - Airsoft Pistol and that would be the folding - sliding stock and of course some internal parts. The rear fold out portion of the stock is actually hardened steel!
Realism: As a replica of a real steel Mac 11 M11, the KWC Mac 11 M11 CO2 BB - Airsoft Pistol looks bang on since it is 1 to 1 scale and at least in terms of looks is virtually identical ot teh real Mac 11. In terms of function, that is a different story since the KWC Mac 11 M11 CO2 BB - Airsoft Pistol does not have many working parts other than the trigger, safety and magazine release. The selector switch, bolt charging handle and bolt are all molded into this gun and their only purpose is to look good! The overall weight is rather light too since most of this Mac 11 pistol is ABS or plastic.
Pros:
First 4.5mm Steel BB Mac 11.
1/1 scale replica definitely looks the part.
Full size drop out magazine that holds the CO2 and BB’s.
High capacity 39 rounds magazine.
Built in metal and steel retractable stock.
Decent fps.
Available in both 4.5mm Steel BB and 6mm Plastic Airsoft versions.
Cons:
Pretty much all ABS, kind of light weight.
No blowback or many working parts.
Kind of long and heavy trigger.
Pretty much everything is moulded into this gun.
Comments:
Too be honest when I first saw the box for the KWC Mac 11 M11 CO2 BB - Airsoft Pistol I was a bit excited, that was until I opened it up and found out I was looking at a pretty much all plastic gun with few working parts and no blowback operation. But after holding it and giving this air pistol a good look over I have to say I am warming up to it a bit more now. After all it is the first Mac 11 M11 4.5mm steel BB pistol that I know of and it 100% looks the part so if you are looking for a replica Mac 11 then this will fill that purpose for sure. Even though it is almost all ABS plastic, this airgun feels solid seems to be really well made. The steel and metal stock is a nice addition and so would have been a metal magazine but overall for a low cost replica BB and Airsoft shooter you do get your moneys worth.
My Vimeo Video Review for the KWC Mac 11 M11 CO2 BB - Airsoft Pistol:
Wow! Some new 4.5mm Steel BB and 6mm Plastic Airsoft guns and they are all brought to us from KWC. I would expect all of them to be available eventually in both 4.5mm Steel BB and 6mm Plastic Airsoft but for now I have the M11 in both Steel BB and Plastic Airsoft and the Makarov PM and CQBP M45 A1 in Steel BB.
This is just my quick preview video so make sure to watch it as I do show you around the guns fairly nicely but you can expect some more upcoming detailed Table Top and Shooting Videos shortly...
Here are some of the basic specifications for each gun...
Before I get into the detail of my Rambo Costume this year I wanted to mention we are having a Halloween sale in our Canada Replica Airguns Store from Thursday October 29th till Sunday November 1st 2015.
Continuing on with the Halloween Theme... this YouTube video showcases my Rambo Halloween Costume components. I will be dressing up in full costume and sharing the video very soon but wanted to show you al my Halloween Costume bits and pieces most of which I already had which made my costume pretty easy and low cost this year :)
So what does one need to be Rambo for Halloween?
Some heavy duty black boots for sure and beat up is better.
You pant choice could be jeans, camo or all black depending on which movie Rambo you pick, I went with Black cargo style pants and an olive green belt.
You are going to want a dark color wife beater (tank top) as this is a classic Rambo attire, another option is to go shirtless if you are brave enough to do so :)
I would imagine most people are not going to have that 80's long hair so you will probably need some sort of a dark brown curly or wavy wig. I figure the bigger the hair the better. To keep all that hair out of your eyes, Rambo often wore a headband in either black or red, this will also help keep the wig in place.
In terms of weaponry a large kick-ass knife should be strapped to one leg and for firepower, go with bigger is better and a classic trusted machine gun like the AK or M60.
One optional item you can add to your Rambo Halloween Costume all be it one I plan to go with is an Ammo Belt because there simply is never too much ammo!
Finish off the entire package with a few days worth of stubble and some makeup to give you that been through hell dirty and bloodied up look.
Materials: Metal and plastic (polymer) construction.
Weight: 2.7 pounds (1220 grams).
Length: Open 20.6 inches (522mm) - Closed 10.6 inches (270mm).
Propulsion: AEG.
Action: Semi and full auto.
Ammunition Type: 6mm Airsoft BB's
Ammunition Capacity: 58 round magazine.
FPS: 360+.
Trigger Pull: The trigger pull on the ASG CZ Scorpion VZ61 AEG 6mm Airsoft Gun is what you would expect from your typical AEG Airsoft gun since it is basically an on off switch for the electric circuit, it's light and short. As with most AEG Airsoft guns there is a noticeable sight delay from the time you press the trigger till the gun actually fires a BB since the electric motor must first pull the spring plunger back and then release it to fire a round. Because the ASG CZ Scorpion VZ61 AEG 6mm Airsoft Gun uses a fairly low voltage battery it is a bit more noticeable than with some other AEG Airsoft guns and I am not sure if there are higher output batteries for this style of battery setup.
Accuracy: At this point I have not yet tested the ASG CZ Scorpion VZ61 AEG 6mm Airsoft Gun so I do not have any Chronograph fps velocity or paper target accuracy information to provide to you. I plan on performing my Field Test Shooting Review fairly soon so stay posted for that. I can say that since this is the Canada import version it should shoot a .20 gram plastics Airsoft BB at over 360 fps.
Build Quality: The ASG CZ Scorpion VZ61 AEG 6mm Airsoft Gun is a Chinese made Airsoft gun but I have to say it looks and feels really great. For sure as good as any Taiwanese airgun I have come across! The fit and finish both are excellent and there is a lots of metal in this gun including the main frame, folding stock, front and back sights, charging handle, barrel extension, magazine release, selector switch, pins, trigger and trigger guard.
Realism: The ASG CZ Scorpion VZ61 AEG 6mm Airsoft Gun is is true to scale, size and weight to that of the real steel CZ Scorpion VZ61 as far as I can tell without actually having a real CZ Scorpion VZ61 in my possession. Everything works in the same manor as the real CZ Scorpion VZ61, like the charging handle, magazine release, selector switch, adjustable rear sight and folding stock.
Lots of metal parts for a good overall realistic weight and feel.
Semi and full auto selectable.
Comes with battery and charger.
Comes with rail attachment for add on accessories
Folding metal stock.
Adjustable rear metal sight.
Working charging/cocking handle
Scorpion VZ61 Licensed.
Cons:
No blowback so ejection port does not cycle while firing.
May be hard to locate extra batteries and magazines since it is not a common style Airsoft charging system.
Fold out stock is not that usable, kind of short and low.
Made in China?
Comments:
I am really looking forward to performing my Field Test Shooting review for the ASG CZ Scorpion VZ61 AEG 6mm Airsoft Gun and expect it to perform as good as it looks and feels. In terms of size, the ASG CZ Scorpion VZ61 AEG 6mm Airsoft Gun is not much larger than most pistols yet packs a 58 round magazine and AEG reliability and consistency along with true 58 round mag-dump full auto capability. What an awesome sidearm to carry around as your backup gun or tight quarters weapon choice.
Watch my YouTube Table Top Review of the ASG CZ Scorpion VZ61 AEG 6mm Airsoft Gun:
Materials: Metal and plastic (polymer) construction.
Weight: 5.3pounds (2400 grams).
Length: Open 24.8 inches (630mm) - Closed 15.6 inches (395mm).
Propulsion: AEG.
Action: Semi and full auto.
Ammunition Type: 6mm Airsoft BB's
Ammunition Capacity: 100 round magazine.
FPS: 312+.
Trigger Pull: The trigger pull on the ASG B&T BT5 PDW 6mm AEG Airsoft Gun is what you would expect from most AEG Airsoft guns since it is basically an on off switch for the electric circuit. It is fairly light and relatively short. As with most AEG Airsoft guns there is a noticeable sight delay from the time you press the trigger till the gun actually fires a BB since the electric motor must first pull the spring plunger back and then release it to fire a round. Higher output batteries will make this less noticeable since the electric motor will run much quicker.
Accuracy: At this point I have not yet tested the ASG B&T BT5 PDW 6mm AEG Airsoft Gun so I do not have any Chronograph fps velocity or paper target accuracy information to provide to you. I plan on performing my Field Test Shooting Review fairly soon so stay posted for that.
Build Quality: The ASG B&T BT5 PDW 6mm AEG Airsoft Gun is a Chinese made Airsoft gun but I have to say it looks and feels really well built in general. I would say easily as good as any Taiwanese gun I have come across! The fit and finish both are excellent and there is a ton of metal in this gun including the main frame, sights, but plate, charging handle, barrel extension, sling mount and magazine release.
Realism: The ASG B&T BT5 PDW 6mm AEG Airsoft Gun is is very true to scale, size and weight to that of the real steel MP5 PDW as far as I can tell without actually having a real MP5 PDW in my hands . I am pretty sure Brügger & Thomet does not actually have an MP5 version in their product lineup or as this ASG model is named BT5 rather than MP5? That said the ASG B&T BT5 PDW 6mm AEG Airsoft Gun is really simply a replica of an HK MP5 PDW and based on that, it's really close in almost every way.
Lots of metal parts for good overall weight and feel.
Semi and full auto selectable.
Comes with battery and charger.
Folding stock.
Adjustable rear metal sight.
Working Cocking Handle
B&T Licensed.
Cons:
No blowback.
Does not come with rail clamp.
Would of liked a longer higher capacity magazine.
Mine had the wrong charger.
Comments:
I am really looking forward to performing my Field Test Shooting review for the ASG B&T BT5 PDW 6mm AEG Airsoft Gun and hope it performs as good as it looks and feels. I really like my 4.5mm Steel BB Umarex HK MP5K PDW but find it to be a little bit on the lighter side since it is mostly plastic. The ASG B&T BT5 PDW 6mm AEG Airsoft Gun fixes that problem with it's mostly metal build and I also get the added benefit of having full auto that is missing from the Umarex version.
Watch my Vimeo Table Top Review of the ASG B&T BT5 PDW 6mm AEG Airsoft Gun:
Ammunition Capacity: 15 round metal stick magazine.
FPS: 380 & 400 fps claimed.
Trigger Pull: Trigger pull on both the Umarex Beretta Elite II and Umarex HK45 is double action only but they don't feel too bad, they have that traditional longer double action pull but I did not find it to be too heavy and the release point is fairly predictable for me which should allow for some good overall accuracy when I do my future Field Test Shooting Review.
Accuracy: I have done a full Felid Test Shooting Review Video for the Umarex HK 45 Metal Slide CO2 4.5mm steel BB Pistol so make sure to check that one out! In summary with the 4.5mm Steel BB version I got a bit higher fps then claimed at 420 fps with a 5 shot string using a brand new CO2 with RWS 5.1 grain zinc coated steel BB's. From 30 feet away shooting on a paper target using a semi rested posting I was able to place 10 BB's within 1.5 inches, almost close to a 1 inch grouping. The shot placement for me was just a tad to the left and a bit down but several shots hit the bulls eye so out of the box accuracy was really good on this low cost BB pistol. Since both the Umarex Beretta Elite II and Umarex HK45 Airsoft pistols share many of the same mechanical qualities, I should expect similar results even using 6mm plastics BB's, perhaps a bit wider grouping but fps should be pretty close to claimed.
Build Quality: The Umarex Beretta Elite II and Umarex HK45 are built fairly basic with few moving parts so there is not much to go wrong, the fit and finish is good and there is metal where it needs to be internally and also in the trigger, magazine and on the HK45 even the slide. Both Airsoft Pistols have decent weight even though there is a fair amount of plastic in them.
Realism: Both Umarex Airsoft pistols are accurate looking replicas of their real steel counterparts, in the case of the Umarex HK45, it is very accurate on almost every detail appearance wise, the Umarex Beretta Elite II is not an exact replica of any one specific Beretta but is based on the Beretta Elite II Brigadier. There is no working slide on either pistol and the slide catch/release and hammer are molded into the plastic. The only working parts would be the safety, magazine release and trigger.
Both have tactical rails for adding on accessories.
Both are fully licensed.
Both have pretty decent weigh to them.
The HK45 has a metal slide and white dot sights front and back
The Elite II has white dot front sight.
Cons:
Both guns are double action only.
Both guns have none working hammers
Neither gun has a working slide or blowback action.
Both guns have red tips.
Non adjustable sights.
Comments:
Considering these Airsoft Pistols are rather low cost, the Umarex Beretta Elite II and Umarex HK45 have a lot going for them! They are fully Beretta and HK licensed through Umarex with a (metal slide in the HK45) and metal parts where you want and need them to be. I am expecting decent accuracy and power from both guns and even the double action triggers are very usable. Sure the both budget Airsoft pistols is a pretty basic airguns with few moving parts but then again simplicity is sometimes better in terms of reliability. If you are an Beretta or HK fan and want low cost well made and good performing Airsoft pistols then checkout these Umarex Airsoft guns.
My Vimeo Table Top Review for the Umarex Beretta Elite II and HK45 CO2 Airsoft Pistols:
Getting back to this Field Test Shooting Video, so how did the KWC Jericho 941 CO2 Airsoft Pistol perform for me? I was expecting some pretty decent fps performance sine the steel BB version was a pretty hot shooter but in Airsoft you don't always want crazy high fps performance or the gun may not be usable in any Airsoft games since it could injure an opponent. My 5 shot Chronograph test using .20 gram Airsoft BB's with a brand new 12 gram CO2 gave me an average of 438 fps which is about as fast as you are going to want an Airsoft gun to shoot. This pistol should be capable of hitting targets pretty far down range.
When I setup for the accuracy portion of my Shooting Field Test, as usual I stood 30 feet back from a paper target and used a semi rested stance (sand bag up front and standing in the back). My first round of 10 shots shot really high, with most of the shots hitting the target off camera. So I decided to take another 10 shots but this time with my aim point set at the bottom of the target. Using this method I was able to get all 10 shots fairly well centred on the paper target all within about 3 inches of each other. Not bad. So yes the KWC Jericho 941 CO2 Airsoft Pistol at 30 feet shoots a bit high but depending on what ranges you want it set for it may be just what you want?
The KWC Jericho 941 CO2 Airsoft Pistol is a double action only pistol without blowback operation so the trigger pull is longer and heavier then a blowback pistol with a single action trigger but I would have to say you can still rip off a bunch of quick shots regardless of the heavier trigger pull. In a nutshell the KWC Jericho 941 CO2 Airsoft Pistol is a really solid and consistent shooter with a fairly low price tag and the advantage of full size drop out metal magazines which are perfect for in field shooting.
I have already reviewed the 4.5mm Steel BB version of the ASG Bersa BP9CC and done both a Table Top Video and Field Test Video review for it so make sure to check those review video links out!
In this Field Test Shooting videos review I take the ASG Bersa BP9CC CO2 Blowback Airsoft Pistol through its paces and test it using my Chronograph to see what kind of real world fps we can expect from it. I also perform my usual 30 foot back paper target accuracy test to see what kind of a 10 shot grouping the ASG Bersa BP9CC CO2 Blowback Airsoft Pistol will achieve.
I have to be honest and say that there may have been a problem with the valve in my test unit since I was getting really inconsistent velocity readings using my Chronograph to test out the fps. I could even hear the difference in how much CO2 was being let out with each shot and even the recoil from the blowback slide was sometimes very hard and sometimes very soft. I did end up getting an average of 356 fps but it ranged anywhere from 420 right down to below 300 fps?
With the extreme velocity readings I was getting I did not expect the ASG Bersa BP9CC CO2 Blowback Airsoft Pistol to be super accurate as velocity can really effect the high and low target placement but I was surprised when pretty much all the shots hit within a 3 inch group, with the excepting of a double shot that obviously shot slow and low. This double shot was a result of the slide not kicking back all the way and not reset the single action internal hammer so when I pulled back the trigger I loaded a round into the barrel but could not fire the gun. Resulting in me having to manually pull the slide back and then pull the trigger back a second time, loading a second Airsoft BB into the barrel and firing both BB's at the same time.
My 4.5mm Steel BB version did not seem to have this inconsistent power problem so it may be that my gun either needed some break in time or perhaps had a faulty valve? Even so It actually performed well during the accuracy portion of the test for me.
During this Field Test Shooting Review Video I test out the ASG - Marushin Chrome Derringer 6mm Gas Airsoft Pistol by shooting some rounds through the Chronograph to get an idea on how powerful it really is. I also step back 30 feet and place some rounds down range on my paper target to see just how accurate this little surprise double shot Airsoft pistol is.
In terms of power, all I had to go on was the factory claimed power rating of .6 joules. So I filled up the ASG - Marushin Chrome Derringer 6mm Gas Airsoft Pistol with Propane gas, loaded two .20 gram BB's and shot them both one after the other though my Chrony. I did find that topping up the gas was necessary between loading this gun as the gas chamber is very small. You will only get three shots out of a fill but the last shot is really slow.
I did find that I consistently got right around 250 fps on the fist shot and pretty much bang on 200 fps for the follow-up shot. Not super fast but fast enough to hit a small paper target 30 feet away pretty much every shot. Shooting 6 rounds on my paper target from 30 feet back using a semi rested position I was able to get 5 out of 6 shots pretty well placed on my paper target. I am not sure what happened to the 6th shot but it seemed to hook really hard to the right, perhaps the Airsoft BB was deformed? My 6 shot grouping with the excepting of the one shot that went MIA ended up being about 5 inches, not bad for such a small little low fps pistol.
So in terms of usefulness what can you expect from the ASG - Marushin Chrome Derringer 6mm Gas Airsoft Pistol? Well you are for sure not going to be sniping anyone with it but it could for sure come in handy as a surprise back for your backup gun!
Action: Over-under double barrel single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 2 rounds.
Energy: .6 Joules.
Trigger Pull: The trigger pull on the ASG - Marushin Chrome Derringer is single action only so you will have to cock the hammer separately for each of the two shots. The action of the single action trigger is extremely short with virtually no take-up to speak of. The trigger pull is also very light.
Accuracy: This part of the review is yet to be determined as I have not done my Field Test or Shooting tests for this pistol. I will put a link in here when I have done my official Field Shooting Test. I have done a little bit of playing around with the ASG - Marushin Chrome Derringer 6mm Gas Airsoft Pistol and can say it is not going to be the most accurate or powerful gun out there but that's not really what this ultra compact gun is meant for, more of a surprise, hey where did that come from kind of gun!
Build Quality: The ASG Chrome Derringer 6mm Gas Airsoft Pistol is built by Marushin and as a Japanese based company it is going to be mostly plastic but with that said this little pistol is built really well, the mechanical parts that need to be metal are, like the grips hammer, trigger, safety and many of the pins and screws. Everything is tight and the tolerances are excellent. The finish is also pretty much flawless.With the added metal parts this .5 pounds pistol actually feels pretty solid in the hand and it's hard to tell so much of it it is actually plastic.
Realism: The ASG - Marushin Chrome Derringer 6mm Gas Airsoft Pistol looks the part of a real steel Derringer in terms of size and mechanical parts all functioning as they would. Even the over-under barrels are recessed to look like a much larger caliber than 6mm. The only real give away would be the small gas valve located under the handle and of coursee the lighter weight.
Not a lot of meat parts but the metal grips, hammer, trigger and safety seem to add enough weight to make this Derringer feel pretty solid in the hand.
Nice recessed over-under barrels.
Mechanical part feel solid and tight.
Cons:
Main gun build is plastic, typical of Marushin guns.
Not a lot of power from my preliminary testing.
Only 2 shots so make them count!
Comments:
The ASG - Marushin Chrome Derringer is a rather unique 6mm Gas Airsoft Pistol and is not going to make a very good primary weapon or for that matter even a good secondary weapon, but on that off chance you want surprise on your side then this little guy would make a really great last resort gun for when you only have that one shot up close and personal and it's now or never... There's also the fact that it's a Derringer and how cool is that!
My Vimeo Table Top Video Review for this ASG Chrome Derringer 6mm Gas Airsoft Pistol:
In this Field Test Shooting video I test out the performance of the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol using my Chronograph to get a real world (FPS) Feet Per Second rating. I also position myself 30 feet back and shoot 10 rounds at a paper target using a semi-rested shooting position (Sand bag up front and standing in the back).
In terms of velocity the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol shot a bit on the fast side at 414 FPS when averaging a 5 shot strong using .20 gram BB's with a brand new CO2. Keep in mind I was using the CO2 magazine which will have more power than the Gas Magazine version. I would assume the Gas mag version would shoot right around the mid 300's which may be more suited for indoor Airsoft games. For outside Airsoft wars you may want the extra power of the CO2 mag for shooting at targets further distances out.
Stepping back 30 feet and shooting at my paper target, the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol produced a decent 2 inch 10 shot grouping that was just a hair low but well centered left and right. The low factor could be adjusted up using some Hop-up tweaking. The trigger in single action mode is light and the release is crisp. Even the double action trigger is fairly light for double action, but there is a lot more take up since your finger is doing all the work that the blowback action would normally do for you when shooting in single action.
With the heavy blowback and high FPS the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol creates a really great shooting experience. It would be great for some target practice, getting some additional trigger time in if you are a Sig Sauer P226 owner and would make an excellent outdoor Airsfot war backup weapon. The quality is excellent and as a lover of the Sig Sauer lineup of guns I highly recommend this Airsoft pistol from KJWorks.
Here is my follow up Shooting Field Test video for my Cybergun Colt 1911 MKIV CO2 Table Top Review. During this Field Test Shooting video review I shoot 5 rounds of .20 gram Airsoft BB's through my Chronograph to find out the average FPS. I also step back 30 feet and setup my shooting stance by resting my hands on a sand bag and standing in the back for a fairly secure shooting position. As per most of my accuracy tests, I loaded my Cybergun Colt 1911 MKIV CO2 Blowback Airsoft Pistol with 10 rounds in the magazine to see what kind of grouping I could get on the paper target..
I was a bit surprised by the FPS for the Cybergun Colt 1911 MKIV CO2 Blowback Airsoft Pistol I tested. The claimed FPS by the factory is 360 using .20 gram BB's, the temperature outside was decently warm and I was using a brand new CO2 so I should have gotten fairly close the this velocity. As it turned out on this day the gun I was testing shot right around 300 FPS which is great for close quarters Airsoft games but perhaps a bit weak for the longer ranges of outside games.
When it came to accuracy, I did find the Cybergun Colt 1911 MKIV CO2 Blowback Airsoft Pistol shot a bit high and to the left right out of the box but since it has a fully adjustable trigger this did not concern me. I was pleased to see that I was able to get a 2 inch 10 shot grouping from 30 feet back using a semi rested position which is about right for an Airsoft Pistol at this range.
While testing the Cybergun Colt 1911 MKIV CO2 Blowback Airsoft Pistol I did not have nay mechanical problems, everything worked exactly as it was meant to , the Blowback was nice and crisp with that usually 1911 sluggishness I have come to expect. The trigger is pretty typical for a single action 1911 styled trigger which in some cases can actually be a little bit on the light side which with the Cybergun Colt 1911 MKIV CO2 Blowback Airsoft Pistol was not the case. Over all a really pleasurable Airsoft Pistol to shoot!
