In this Replica Airguns Vimeo Field Test Shooting Video I put the KWC / Umarex Mod. 92 A1 andElite Force 1911 TAC CO2 Blowback Airsoft Pistols through my Indoor Sea Can Shooting Test. Fist I find out what the real world velocity is by placing 5 rounds through my Chronograph and average out the FPS. I then shoot 10 rounds on a paper target for 30 feet back using a semi rested shooting position, sand bag up front and seated in the back.
Starting with my velocity test for both CO2 Blowback Airsoft Pistols I made sure to use a brand new CO2 along with .25 gram Airsoft BB’s so a bit heavier than what was used for the official stats. Both Umarex Airsoft Pistols shot really similar velocities with the Umarex Beretta Mod. 92 A1 averaging 364 FPS and the Umarex Elite Force 1911 TAC averaging 365 FPS. If I had been using .20 gram Airsoft BB’s I am sure these numbers would have been closer to the claimed 400 or so FPS.
Moving on to the accuracy test again I performed this test which each Umarex CO2 Blowback Airsoft Pistol. The Umarex Beretta Mod. 92 A1 performed a little bit better than the 1911 with all 10 shots grouping within 1.5 inches and very well centered on the target. The Umarex Elite Force 1911 TAC did have a slightly wider grouping closer to 2 inches and was a lilt bit high on the target but center nicely left to right. Of course the full auto mode on the Umarex Beretta Mod. 92 A1 did not produce anything even close to a tight group but it is always fun shooting in full auto :)
All in all both of these KWC / Umarex CO2 Blowback Airsoft Pistols performed well for me in terms of meeting their expectations for velocity and accuracy. We have them in our online Replica Airguns Stores in either KWC Unlicensed or Umarex Licensed versions so take your pick!
In this Vimeo Replica Airguns Update Video I take a look at three CO2 Airguns, one is a 4.5mm Steel BB revolver distributed by Barra and two are CO2 Blowback Airsoft Pistols distributed by Umarex. All of these CO2 Airguns I have previously reviewed in slightly different versions either barrel length and finish or Steel BB as compared to 6mm Airsoft So checkout why other reviews on similar version Airguns.
The Barra Barra Schofield CO2 BB Revolver is a replica of the Schofield No. 3 single action revolver and utilizes 6 reloadable shells for a very realistic shooting experience. It is very solid in construction bing made mostly out of metal and weighs in at around 2.4 pounds. This version shots 4.5 mm Steel BBs at a velocity of up to 400 fps. It comes in a variety of barrel lengths and finishes so amen sure to have a look in our Online Replica Airguns Store for what we have available…
Next up from Umarex is the fully licensed Beretta Pietro Mod. 92 A1 CO2 Blowback Semi and Full Auto Airsoft Pistol, this product is distributed by Umarex but is made by KWC. Another solid metal pistol with a hefty 2.4 pound weigth that holds 21 rounds in its full size drop out metal magazine and offers both semi and full auto shooting at the flick of a switch!
Again from Umarex I showcase the Elite Force 1911 Tac CO2 Blowback Airsoft Pistol and like the Beretta Pietro it too is made in the KWC factory for Umarex. The 1911 Tac as the name suggest is a tactical version of the standard Colt 1911 but with some upgrades like a skeletonized hammer and trigger along with an ambidextrous safety, white dot sights front and back and a picatinny rail on the frame for add ons. You can expect velocity to be somewhere in the 400 fps range and the full size drop out metal magazine holds 15 Airsoft BB’s.
UPDATE: All Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols now ship with the Shorter Barrels!!
In this Field Test Shooting Video I test out the Umarex Glock 17 Gen 4 GBB Airsoft Pistol in the Replica Airguns Indoor Sean Airgun Shooting range. This product now comes with the longer sticking out barrel to increase the FPS for import into Canada to get it up and over the 360 FPS requirement using a .20 gram Airsoft BB. In my previous video I test out the Umarex Glock 19 Gen 3 GBB Airsoft Pistol but swapped out the longer barrel for the shorter barrel to see how much the sorter barrel reduces velocity and also if there is an impact on accuracy? Make sure to watch that video to get the scoop on the shorter barrel with both the Umarex Glock 17 dam Glock 19 GBB Airsoft Pistols
For the velocity portion of this test I placed several .25 gram Airsoft BB’s through my Chronograph and was please to get a very consistent 355 average FPS reading which is very close to the claimed 360 FPS when using .20 gram Airsoft BB’s so if I had been using a lighter BB I would have for sure seen velocity up and over the 360 FPS.
In terms of accuracy the Umarex Glock 17 Gen 4 GBB Airsoft Pistol also performed really well, maybe not as well as the short barrel Glock 19 Gen 3 I tested just last week that seemed to group just a little bit tighter and was a little bit more well vented on the target. Both the Glock 17 and Glock 19 shot a bit low but I am sure a slight hop-up tweak could rectify that. I did however manage to get around a 2 - 2.5 inch 10 shot grouping.
So in summary both the Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols at least for now come with the longer barrels only and so you options are to either cut down the existing barrel or buy a shorter barrel and replace it, that is unless you like the look of the long sticking out barrel ;) You will get a velocity drop of around 75 FPS with the shorter barrel installed but I would say accuracy should be about the same at the end of the day.
UPDATE: All Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols now ship with the Shorter Barrels!!
In this Field Test Shooting Video I test out the Umarex Glock 19 Gen 3 GBB Airsoft Pistol in the Replica Airguns Indoor Sean Airgun Shooting range. This product now comes with the longer sticking out barrel to increase the FPS for import into Canada to get it up and over the 360 FPS cut off using a .20 gram Airsoft BB. I wanted to see how much of a difference the shorter barrel would make so I will be comparing the short barrel with the long barrel to find out the FPS and accuracy differences. In the Video I only shoot the Umarex Glock 19 Gen 3 GBB Airsoft Pistol with the short barrel but in my next video I Shot the Umarex Glock 17 Gen 4 GBB Airsoft Pistol with its included long barrel for comparison.
For the velocity portion of this test I placed 5 .25 gram Airsoft BB’s through my Chronograph and was please to get a very consistent 276 average FPS reading with the slowest shot hitting 274 FPS and the fastest shot hitting 278 FPS so really close. Keep in mind I was using .25 gram Airsoft BB’s rather than .20 gram Airsoft BB’s so I would imagine the Umarex Glock 19 Gen 3 GBB Airsoft Pistol even using the shorter barrel should hit closer to 300 FPS with the lighter Airsoft BB’s.
In terms of accuracy the Umarex Glock 19 Gen 3 GBB Airsoft Pistol also performed really well, I did not make any adjustments to the gun after installing the shorter barrel not even to the hopup. I was pleased to see a fairly well centered 10 shot grouping mostly within a 2 inch grouping with perhaps one flyer extending that group to about 2.5 inches. All shots where well centered left to right but just a light bit under the target, a quick hopup adjustment should rectify that.
My next Vimeo Video will be focusing on the Umarex Glock 17 Gen 4 GBB Airsoft Pistol with its included long barrel to see what kind of velocity gains we get for it and if the longer barrel helps with accuracy at all so look for that video early next week!
UPDATE: All Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols now ship with the Shorter Barrels!!
Type: Blowback GBB Airsoft Pistols. Manufacturer: Distributed by Umarex. Model:Glock 17 Gen 4 & Glock 19 Gen 3. Materials: Metal & Polymer. Weight: 1.66 Pounds (642 grams) / 1.64 Pounds (634 grams). Barrel: Smooth bore 10.8 inch barrels. Propulsion: Green Gas or Propane. Action: Semi auto blowback, single action only trigger. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 22 / 19 round drop out full size metal magazines. FPS: Claimed 410 with .20 gram Airsoft BB’s.
Trigger Pull: The trigger pull on the Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols is fairly short with only a little bit of take up, the release is light and crips. The blowback action resets the internal Hammer / Striker with each shot for that true single action trigger and it’s also nice that the trigger does have a working trigger safety like the real steel versions.
Accuracy: At this point I have not shot either of the long barrel Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols so I can only quote what Umarex is saying in terms of FPS which is around 410 using Green Gas or Propane. These longer barreled versions should shoot fairly hot compared to the much shorter barreled versions and since i do have a short barrel Glock 17 Gen 4 I may also compare it at the same time to see what the actual barrel length does in terms of fps velocity. Of course my Field test Shooting video will also focus on accuracy add see what can be accomplished shooting a 10 shot grouping at 30 feet down range.
Build Quality: TheUmarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols seems well made overall. It does seem a little bit underweight but still feels solid enough in the hand, Glocks are not known for being all that hefty. The Slide is metal but has a bit of an unusual finish that makes it look a lot like the plastic frame rather than a more shiny metal look. All the parts seem to fit nicely, maybe even a bit snug at first as I noticed the side had a bit of friction to it but seems to be working in nicely now.
Realism: The Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols look the part of these Glocks all day long. Other then the slightly lighter weight it would be hard to tell off hand until you remove the magazine and take a closer look. All the parts work as you would expect them to, similar to the real steel version and you can even fully field strip the them which makes getting to and adjusting the hop-up easy enough to do. Available From: The Replica Airguns Store.
Pros:
Decent weight and feel to them, build quality seems good.
Really nice looking replicas of the original Glock 17 Gen 4 / Glock 19 Gen 3.
Fully Glock licensed via Umarex.
Easy to see white dot sights front and back with rear sight adjustable for windage.
Recessed barrel for added realism when cut down.
Accessory rail for adding a laser or tactical light.
Full size drop out metal magazines that holds the Green Gas and 6mm Airsoft BB’s.
Warning instruction are nice and discreet under trigger guard.
Nice light SAO trigger as the blowback action pre-cocks the internal hammer/striker.
Working trigger safeties.
No red tips and more realistic outer barrel size.
Cons:
Only comes with the longer barrel so you need to either cut it down or replace it with a shorter barrel.
No way to put a mock suppressor on it to keep extended barrel.
Comments:
Getting the Umarex BB versions of the Glock 17 and Glock 19 has for sure been a bit easier since fps velocity is not a factor. So it’s great that we at least have a way to import these two Umarex Glock GBB Airsoft Pistols into Canada! Yes some home modifications may be required to cut down the inner barrel as the long extended barrels are certainly not practical for every day shooting. That said with the extended long barrels I did get out and shoot a few rounds through them and the added barrel length really does allow for a much faster velocity Airsoft BB making these Umarex GBB Airsoft Glocks more like snipper pistols :)
UPDATE: All Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols now ship with the Shorter Barrels!!
In this YouTube Update Preview Video I go over a couple new Umarex Glock Licensed GBB Airsoft Pistols that I feel require a bit of explaining. Essentially we already stock these same Umarex Glock Blowback Airsoft Pistols, but in the CO2 magazine versions. The Umarex Glock 17 Gen4 and Umarex Glock 19 Gen3 I highlight in this video come with Green Gas Magazines and both have extended inner barrels to allow for Canada import to increase the velocity to our over 360 fps using a .20 gram Airsoft BB.
Usually Green Gas Airsoft Pistols with extended inner barrels will have the ability to unscrew the extension and will even come with a shorter replaceable barrel but in this case all you get is the longer one piece inner barrel. My suggestion is to either cut down the long inner barrel to fit within the out barrel or purchase a short inner barrel when they are available.
At the moment we do not have either one of these Airsoft Pistols listed in our Replica Airguns Stores but they should pop up shortly!
In this Preview Update Video three newer products, two Umarex Airsoft CO2 Blowback Pistols and one CO2 Blowback BB Pistol from Crosman. This is far from a full review which I will remaking for all of these Airguns in the near future. I simply go over some of the main specifications and show you quickly around each Airgun.
Type: GBB Airsoft Pistol. Manufacturer: WE Airsoft Model:1039 M2 Materials: Mostly all metal build. Weight: 2.43 pounds (1100 grams). Barrel: 4.53 inches, non-rifled. Length: 8.5 inches. Propulsion: Green Gas Action: Semi & full Auto, single and double action trigger. Ammunition Type: 6mm Plastic Airsoft BB's. Ammunition Capacity: 26 round full size dropout metal magazine. FPS: 366+.
Trigger Pull: The trigger pull on the WE M92 GBB Full Auto Airsoft Pistol is good in both single and double action. Double action as expected has the longer heavier pull but is still smooth and fairly light with a predictable release. Single action shooting has a much shorter trigger pull with a bit of take-up and an even lighter release than in double action shooting mode.
Accuracy: This is one of those times I actually performed my Field Test Portion of my Review first so I do have some feedback in terms of the accuracy and velocity for the WE M92 GBB Full Auto Airsoft Pistol. WE claims an fps of around 366+ using the extended barrel that comes with it so this is how I tested it. I did use .26 gram airsoft BB’s so the fps was a bit lower but I did get close to 320 fps, So you should expect around a 20% increase in FPS using .20 gram Airsoft BB’s, so closer to 360-380 fps. In terms of accuracy I did notice that the WE M92 GBB Full Auto Airsoft Pistol shot rather low for me, as much as 8 inches at 30 feet out, perhaps adjustment get hop-up will fix that, at longer ranges it should… That said I found I was able to get around a 1-5.2 inch 10 round grouping at 30 feet out. In terms of full auto, all I can say is don’t expect to hit very much you point at as the gun really likes to rock around!
Build Quality: The WE M92 GBB Full Auto Airsoft Pistol is a really gorgeous looking pistol and has one of my favorite looking finishes in that stainless steel look. You will find it has an overall solid build quality, it is virtually all metal with only the grips and some internal parts like the gas chamber and nozzle being plastic. There is almost zero slide wiggle and all in all this Airsoft pistol performed great for me with no mechanical problems.
Realism: As is with most Full Blowback Airsoft Pistols they are built to look and act the part of their real steel counterparts and the WE M92 GBB Full Auto Airsoft Pistol is no exception! All mechanical parts work as intended and you can easily field strip the WE M92 GBB Full Auto Airsoft Pistol to swap out the internal barrel and adjust the hop-up. I like the fact that WE Airsoft color matched the magazine rather than simply shipping it with the black magazine as I have found some other companies do.
Pros:
All metal pistol with good weight to it.
Crisp firm full blowback operation.
Excellent fit and finish.
No markings on the metal parts at all, just the WE branding on the grips.
Color matching magazine.
Gun will accept real Beretta M9 grips.
Semi and full auto selector safety switch.
White dot sights front and back.
Good fps, right around the claimed 366 using .20 gram Airsoft BB’s.
Very believable working replica of the real steel Beretta M9 Pistol.
Fully field strip-able.
Comes with extension barrel and replaceable inner barrel if not going to use extension.
Cons:
No marking on the gun if that is important to you?
Shot rather low in my testing but hop-up and barrel change may fix it.
Almost unusable in Full Auto mode.
The WE M92 GBB Full Auto Airsoft Pistol is one of the nicer looking Airsoft Beretta M9 pistols on the market and is comparable in quality to other higher end brands like KWA and KJWorks. The price point is also in line with what you are getting. I really like the Stainless - Silver - Chrome finish or what ever you want to call it… One thing I was not able to determine 100% is if this version is in fact the Gen 2 version but I do believe it is given that it has the black gas tube in it. We just don’t have it advertised as such. If you’re in the market for a Beretta style M9 Pistol then consider the WE M92 GBB Full Auto Airsoft Pistol as a solid choice.
I haven’t reviewed many WE products over the years as they where not part of our inventory in the Replica Airguns Store. The good news is we do carry a selection of their pistols in our Canada Store including the WE 1039 M92 GBB Full Auto Airsoft Pistol I review in this video along with some 1911’s. In this Field Test Shooting Video I test out the WE 1039 M92 GBB Full Auto Airsoft Pistol in the Replica Airguns Sea Can Indoor Shooting Range to find out what the real world velocity and accuracy is.
Starting with the velocity portion of the test I place 6 rounds through my Chronograph using .25 gram Airsoft BB’s and I averaged 317 fps which is about right considering the claimed fps is 366+ using .20 gram Airsoft BB’s. The temperature was also not overly hot or cold in the Sea Can so in warner shooting conditions the fps will up a bit too.
Next I performed my accuracy test where i generally shoot 10 rounds on a paper target for 30 feet back ling a rested shooting position, sand bag up front and sensated in the back. I found the WE 1039 M92 GBB Full Auto Airsoft Pistol was shooting a good 6-8 inches low at this range with the default hop-up setup so I had to aim near the top of my target to place rounds closer to the bullseye for the sake of the video. I would say the WE 1039 M92 GBB Full Auto Airsoft Pistol is capable of 1-2 inch 10 rod groupings, my test was closer to 2 inches but I can see potential for sub 2 inch groups. A quick hop-up adjustment should bring the aim point closer to where the rounds are actually hitting. I did perform a full auto mag dump and the WE 1039 M92 GBB Full Auto Airsoft Pistol was able to get through all 26 rounds with a full mag of gas but as expected accuracy was not very goo dat all as the heavy blowback action really throws this gun around.
All in all the WE 1039 M92 GBB Full Auto Airsoft Pistol is a really nice Airsoft pistol that performs fairly well and in a game situation would get the job done nicely. It’s also a real looker with it’s stainless looking finish. Keep posted for my Table Top Video I will be making shortly for the WE 1039 M92 GBB Full Auto Airsoft Pistol.
Wow, an accessory review, not many of these :) Today I take a look at the Amomax Airsoft Airgun Holster product line since at some point you may want to put your gun in a holster or practice drawing your gun from a holster?
The good news is we just got in a decent amount of product for our Amomax Airsoft Airgun Holsters. Here is a bit of info about Amomax but of course make sure to watch the video as I take a good look at a few of the versions we sell in our Canada and US online Replica Airguns Stores.
Amomax holsters are compatible with 4 different carrying platforms :paddle (standard), belt clip, MOLLE, and drop leg platforms. All the carrying platforms can be replaced by only one screw. Users can carry them in daily use, outdoor sports, normal shooting training and competition. Holster will stay firmly on a belt, leg and MOLLE system even in fast moving situations with a quick release Retention System button that keeps the gun locked in place until you are ready to draw. Holster body and carrying platform are connected with a tooth gear that allows for 360 degrees of rotation. User can easily adjust the carrying position to fit their needs.
Amomax Holsters are currently available in the following versions:
Today I decided to get outside since the weather was nice and make my Field Test Shooting Video for the ASG TAC-6 CO2 Airsoft Rifle (actually outside in the filed!) After all the ASG TAC-6 CO2 Airsoft Rifle is a sniper rifle and so I wanted to test it out at longer ranges than my 30 foot indoor shooting range can allow for. So I setup two paper targets at around 40 feet and 80 feet out, the actually distance may have been longer than that?
Starting off my Field Test Review I placed five .25 gram plastic Airsoft BB’s through my Chronograph and averaged 446 fps which is 6 fps faster than the claimed 440 fps from ASG. And that was with .25 gram Airsoft BB’s so if I was using lighter .20 gram BB’s I would expect velocity closer to around 500fps so don’t be shooting anyone with this Airsoft Rifle at close ranges!
Next I proceeded with my accuracy test placing 5 rounds on the target setup around 40 feet downrange. I managed to get all 5 rounds within about 2 inches of each other, not bad since this is a good 10 feet more than I usually test my Airsoft Rifles at. With the remaining 10 rounds in my magazines I was hoping to get at least a couple shots on my paper target setup a good 80 feet away but did not have much luck, I even reloaded the 15 round stick magazine 2 more times and gave it a go but again with no success! The Airsoft BB’s seemed to want to angle off in all direction usually up and to the right or left right before the 80 foot target, perhaps I would have had much better luck at 60 feet?
All I can surmise from this higher range Field Test is that the ASG TAC-6 CO2 Airsoft Rifle is not really a long range Airsoft gun at least with the .25 gram Airsoft BB’s I was using, maybe heavier Airsoft BB’s would settle down a bit more? I can say at ranges up to 40 feet the ASG TAC-6 CO2 Airsoft Rifle did perform just fine so keep that in mind when looking into buying one of these as smoking cans at 30-40 feet will be no problem and make for some fun times in the back yard or even basement makeshift gun range.
Type: Airsoft Rifle. Manufacturer: ASG. Model:TAC-6. Materials: Plastic with some internal metal parts. Weight: 3.5 pounds (1588 grams). Barrel: 12 inches, metal non-rifled. Length: 36 inches. Propulsion: 12 gram CO2 x 1. Action: Semi auto, double action only. Ammunition Type: 6mm BB's. Ammunition Capacity: 15 round metal stick magazine. FPS: 440.
Trigger Pull: The double action only type trigger pull on the ASG TAC-6 CO2 Airsoft Rifle is not too heavy but it is rather long so really quick rapped fire shooting will require some finger work. The trigger reset is right at the begging of the pull so you need to make sure you allow the trigger full range of motion or you may miss the odd shot.
Accuracy: I haven't done my Field Test Shooting video just yet for the ASG TAC-6 CO2 Airsoft Rifle but will shortly so stay posted for that video. ASG claimed the fps to be right around 440 and I am assuming with .20 gram Airsoft BB’s, I will most likely busing .25 gram Airsfto BB’s for my testing so I am hoping for around 400 fps or so. With the fiber optic front sight and fully adjustable rear peep sight I shoudl be able to get some decent rounds on target downrange and hopefully get a nice grouping.
Build Quality: The ASG TAC-6 CO2 Airsoft Rifle is mostly plastic but feels pretty good in the hand with decent fit and finish. There are some metal internal part along with the outer barrel and top rail but for the most part the ASG TAC-6 CO2 Airsoft Rifle is all plastic including the trigger and front and rear sights.
Realism: The ASG TAC-6 CO2 Airsoft Rifle is not a replica of any modern rifle that I know of but it does look a bit like a Beretta CX4 Storm especially the back half of it. The flash hider and top and bottom raise add to the realism. Available From: The Replica Airguns Store.
Pros:
Very customizable with rails top and bottom.
Comes with a rather nice Bipod that can be used with other rifles.
Front and back removable Iron sights are very usable, fiber optic in front, peep in back.
Safety switch is in a great location for right handed shooters.
Canada version comes with black flash hider.
Mostly plastic but solid construction.
Rubber Butt Pad is nice and thick.
Removable barrel to reduce size for easier transportation.
Also come in 4.5mm Steel BB version.
Optional Integrated laser can be added.
Cons:
DOA Trigger pull is a bit long which will slow down rapid fire shooting a bit.
Mostly Plastic Polymer build.
Why not a longer inner barrel for possible more fps?
CO2 is in the Pistol grip and not the magazine so may not be great for on field battles.
Comments: This may not be the most exciting Airsoft Rifle I have reviewed, it does look kind of cool and the price is right compared to other Airsoft Rifles. Who is it really for? I would say someone looking for an Air Rifle for plinking in the backyard or basement that perhaps want's a little bit more safety in terms of using plastic BB’s rather than Steel BB’s. Sure you can use the ASG TAC-6 CO2 Airsoft Rifle for Airsoft wars but most people want something a bit more realistic in terms of looks and function. Because the ASG TAC-6 CO2 Airsoft Rifle does have built-in Popup it shoudl be able to reach out to longer ranges so we will have to see if it can perform decent at longer ranges when I do my Field test Shooting Video.
My YouTube Table Top Review Video for the ASG TAC-6 CO2 Airsoft Rifle:
I will also be following up my Table Top video with a Field Test Shooting Video to see what possible advantages and disadvantages the Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank has in a real world test of its performance, hopefully all advantages!
Pros:
Compact and is the perfect size to use as a rear buttstock for various 88 Gram and or HPA rifles.
Smaller tank means if you are using a foot pump it won’t take all day to fill up :)
Comes with adapter so can be used with regular HPA and 88 Gram CO2 systems.
Regulated to 1100 psi so should perform better in terms of max velocity and consistency compared to CO2 which is around max 800-900 psi with velocity being effected by cool down.
Not effected by colder temperatures compared to CO2.
Once you have this tank the cost is virtually nothing to shoot compared to expensive 88 Gram CO2 cartages. You just need to buy your pellets or BB’s.
Cons:
Still takes a while to pump up using a foot pump system.
Higher initial cost ($195) than simply buying 88 gram CO2 cartages when you need them.
Will need access to a pump or compressor to use it.
Doesn’t look as good as the supplied buttstock at least with the Sig Sauer MCX and MPX.
Comments:
I guess the question is who is this for? If you are a casual shooter that perhaps owns the Sig MPX or MCX or even another 88 Gram CO2 Air Rifle that the Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank would work with then this may be a bit expensive especially if you don’t have a way to pressurizer the tank at home. On the other hand if you already have a foot pump or air compressor or easy access to one and maybe you have other HPA or CO2 based airguns this tank will work with then it’s kind a no brainer to get it. Maybe you juts want a system that gives you maximum and consistent velocity no matter how cold it is outside. All good reasons to get one in my books.
In this Field Test Shooting Video I put the EMG TTI STI 2011 Combat Master John Wick GBB Airsoft Pistol through its paces to see how well it performs in the Replica Airguns Indoor Sea Can Airgun Shooting Range. I first place 5 rounds through the chronograph to see what the actual real world velocity is and then I shoot 10 rounds on my paper target 30 feet downrange to see how tight of a grouping I can get with it.
For my Chronograph Test I was using .25 gram Airsoft BB’s so the velocity will be a little bit under the claimed 370 using .20 gram Airsoft BB’s. The temperature was average, not hot or cold so right around room temperature. My 5 shot sting resulted in an average of 312 fps so I would guesstimate an additional 50-60 fps using the .20 gram BB’s since the Airsoft BB’s I was using where ab out 20% heavier than what was claimed. So 370 is for sure possible with the EMG TTI STI 2011 Combat Master John Wick GBB Airsoft Pistol.
Going onto my accuracy test, again I used the same .25 gram Airsoft BB’s and placed 10 rounds back to back into my fresh paper target setup 30 feet away. As usually I had my hands resting on a sand bag up front and I was sitting in the back which helps get a fairly stable shooting position but not without some human factor involved. I did manage to place 4 rounds right inside the 1.5 inch bullseye but 6 did come out with my last shot being a bit of a flyer hitting rather low on the target. If I removed the flyer form the equation the EMG TTI STI 2011 Combat Master John Wick GBB Airsoft Pistol did mange to shoot a 3 inch grouping. I do feel I can do better with this Airsoft pistol when I dial in the right Airsoft BB’s, hop-up and of course get a bit more use to shooting it.
All things considered, I really like the EMG TTI STI 2011 Combat Master John Wick GBB Airsoft Pistol! It has one of the best triggers I have ever reviewed with a nice combination of short take up and light predictable trigger release. The blowback action is fast yet not overwhelming and the overall feel of shooting this gun is very satisfying. Make sure to also checkout my Table Top Video Review for the EMG TTI STI 2011 Combat Master John Wick GBB Airsoft Pistol where I go into more details about the specifications and features along with some nice close up video.
Type: GBB Airsoft Pistol. Manufacturer: Made by EMG. Model:TTI STI 2011 Combat Master. Materials: Aluminum & polymer components. Weight: 2.4 pounds (1100 grams). Barrel: 5 inches (127mm) metal non-rifled. Propulsion: Green gas. Action: Semi auto blowback, single action only trigger. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 28 round drop out full size metal magazine. FPS: Claimed 370.
Trigger Pull: The single action only trigger pull on the EMG TTI STI 2011 Combat Master is really great, there is virtually zero take-up with a light, crisp and easy release. You can double tap with ease making the EMG TTI STI 2011 Combat Master a great action pistol. One of the shortest and smoothest 1911 triggers I have tested, at least up there with the best for sure!
Accuracy: At this point I have not shot the EMG TTI STI 2011 Combat Master so I have no idea what the actual real world fps is going to be and how accurate it proves itself so my comments for this part of the review will ahed to wait till I perform my Field Test Shooting Video coming up shortly…
Build Quality: TheEMG TTI STI 2011 Combat Master is for the most part an all metal gun with a CNC Machined Aluminum Slide and metal slide along with mostly ,metal parts throughout. The guide rod is stainless steel and the barrel is also aluminum with an anodized rose gold finish. The fit and finish is awesome on the EMG TTI STI 2011 Combat Master with attention to detail everywhere. The only plastic I could find on this Airsoft pistol would be the grips and the skeletonized trigger.
Realism: The EMG TTI STI 2011 Combat Master is based off of the STI 2011 but is really a replica of the John Wick pistol used in the John Wick 3 movie and is virtually the spitting image to it. You will find licensing and trademarks where you would find them on the real steel version. Of course all the mechanical parts work like the real version and the EMG TTI STI 2011 Combat Master can be fully field stripped.
Pros:
Super crisp, light and short SAO trigger.
Fit and finish is excellent, very little slide wiggle.
Extremely close replica of the custom STI 2011 pistol used in the John Wick 3 movie.
Rear sight is fully adjustable and is not too bulky.
Fiber optic front sight helps with quick targets acquisition.
CNC machined two tone Aluminum slide with metal frame.
Rose Gold barrel looks great!
Full size high capacity 28 round double stack metal magazine.
Ambidextrous thumb safeties.
Working grip safety as you would expect on a 1911 based gun.
Most Mechanical parts work just like a steel version and can be easily field stripped to access hop-up.
Super crisp and fast blowback action, great for action shooting.
Licensing all over this gun true to the real steel version..
Cons:
Comes with the red tip but can be remove pretty easily.
Need a tool to remove the two part guide rod and barrel (don’t lose the screw!).
No dot’s on the rear sight.
Comments:
The EMG TTI STI 2011 Combat Master has got to be one of the most gorgeous and sticking Airsoft Pistols I have reviewed so far. Just everything about this pistol looks and feel great. For a $299 Canadian Pistol you get a really well made high quality product that will be a collectors item to own for years to come. It’s not a small or light gun but for it’s size it feels really well balanced in the hand but for those with small hands it may be a bit too much of a handful. If you see them in stock on our website, make sure to grab one while you can!
In this Update Preview Unboxing Video I take a look at 5 products that came across my table and that I have not reviewed so far on the Replica Airguns YouTube channel.
First I show off an HPA tank from Air Venturi that works perfectly for the Sig Sauer MPX and MCX Pellet Rifles allowing for more consistent fps and I would image a higher overall fps? We will find out when I test it out in the replica Airguns Indoor Sea Can Airgun Range.
13 Oz Aluminum
10 Inches Long
2 Inches Diameter
Integrated Pressure Gauge
Includes Buttstock
CO2 Adaptor Included
3000 PSI Fill
1100 PSI Regulated
Next I take a look at the KJWorks M9A1 GBB Airsoft Pistol, I hover revived the CO2 version before but this version comes with the Gas magazine rather than the CO2 mag for those that prefer gas operated Blowback Airsoft Pistols. Because of the slightly lower FPS the Gas version comes with a barrel extension to make it Canada import friendly.
6mm Airsoft BB’s
Green Gas / Propane
370 fps
25 Round Magazine
2 Pounds
Probably one of the most interesting product I look at in this video at least for me is the EMG JW3 Combat Master GBB Airsoft Pistol. This Airsoft pistol is mainly aluminum with some polymer based off of the 2011 STI and was featured in the 2019 John Wick 3 Film. I’m really looking forward to testing this one out in the Sea Can Replica Airguns Airgun Range!
6mm Airsoft BB’s
Green Gas / Propane
9.4 Inches
366 fps
28 Round Magazine
2.4 Pounds
Moving along to another Air Pistol I finally get my hands on the Crosman P1 which is really just a KWC PT92 4.5mm Blowback CO2 BB Pistol but with Crosman Branding and an included laser. Since I have never shot a PT92 BB Pistol with a laser I will probably make a Field Test Shooting Video to see how well it performs.
4.5 mm Steel BB’s
CO2 x 1
4.2 Inch Barrel
330 fps
19 Round Magazine
2.4 Pounds
Comes with Laser Sight
Last up I take a look at the ASG TAC-6 which is pretty much the exact same ASG TAC-4.5 CO2 Air Rifle I tested a while back but in this case the 6 refers to it being a 6mm Airsoft Rifle rather than a 4.5mm Steel BB Riffle. I am not sure I will do a full Table Top Video since these guns are virtually identical but just in different Ammo types but I hope to get outside and see how well it performs shooting at a bit more distance than the 30 foot indoor range I usually test my Airgun in.
As with most of the new tech I purchase or acquire that I will be using in my Videos for either my GetFitOver40 or ReplicaAirguns YouTube channels, I generally like to do some sort of a practical review for the item. In this case I take a look at the Synco G1 (A2) Wireless Microphone Set which is a pair of wireless transmitters that pair with a single dedicated receiver allowing me to quickly and easily capture good quality audio for my Videos.
For the past couple of years my go to microphone setup for my video was to use a generic lapel mic connected to my Samsung Galaxy Smartphone recording into an audio program. I would then send the audio file via dropbox to my computer where I would then line up the audio file with the video file in my video editing software to get a much higher quality and more clear voice recording versus what the camera mic would be able to capture.
This system has been working fairly well for me but required a somewhat cumbersome lapel cable and of course my bulky Smartphone in my pocket at all times but did allow me to be as far away from the camera as I wanted without any interference or loss of audio clarity.
After playing around with the Synco G1 (A2) Wireless Microphone System I have determined I will most likely simply be clipping the transmitter onto my shirt without the lavaliere mic plugged in and transmitting the audio into either my Samsung Smartphone or my iPad where I can then again dropbox the audio file to wherever I plan on editing the video.
This video was kind of a test to see how everything sounded in terms of the lapel mic versus the built in mic. What settings to use and how distance effected the audio signal and quality. Unfortunately the lapel mic was a bit close to my voice causing some distortion to occur but you can still hear what I am saying no problem. In the future I would place the lapel mic a bit further away from my voice lower down on my shirt or simply use the built in mic as it was not as sensitive to this distortion and seemed to handle louder volume much better than the lapel mic.
Here are some of the specifications for those that like that sort of info :)
Transmitter (TX )
Wireless Transmission - Digital 2.4GHz
RF Frequency Band - 2400-2483.5MHz
Working Distance - 164ft/50m (LOS area) 98ft/30m (NLOS area)
Latency - 12.5ms
Mounting - Pocket Clip
Audio Input - 1/8" / 3.5 mm TRS Mic Input
Audio Input Level - 1V (0dBV)
RF Output Power - ＜10mW
Power Requirement - 3.3V-4.7V
Battery Type - Built-in Lithium Battery
Battery Charging Time - 1.5h
Battery Life - 5h
Dimensions - 52X42X16mm
Material - Plastic
Weight - 35g
Receiver (RX)
Wireless Transmission - Digital 2.4GHz
RF Frequency Band - 2400-2483.5MHz
Approximate RF Sensitivity - -81dBm
Working Distance - 164ft/50m (LOS area) 98ft/30m (NLOS area)
Latency - 12.5ms
Mounting - Pocket Clip
Number of Audio Channels - 2
Audio Output - 1/8” / 3.5 mm TRS Mic Output - 1/8“ / 3.5 mm TRS Headphone Output
Gain - 0-4 Level (0 to 8dB)
Audio Output Level - Line Out: 1V, Monitoring: 25-30mW
In this Field Test Shooting Video I perform my usual Chronograph and Accuracy tests in the Replica Airguns Indoor Sea Can Shooting Range to find out what the actual feet per second velocity is and how accurate the ICS CPX-APE SF1 AEG Airsoft Rifle is in both semi auto and full auto. Watch my Table Top Video if you are looking for more info on Specifications and Details along with a full tear down of the ICS CPX-APE SF1 AEG Airsoft Rifle.
First up I place 6 rounds through my Chronograph to see what the real world velocity is and the ICS CPX-APE SF1 AEG Airsoft Rifle was able to average 391 fps using .25 gram plastic Airsoft BB’s. ICS claims the ICS CPX-APE SF1 is capable of fps up to 460 fps but this would be using lighter .20 gram Airsoft BB’s which I believe is entirely possible!
Next I put a fresh paper target on my metal backstop 30 feet downrange and proceeded to shoot 10 round in semi auto to see how tight of a grouping I could get. I was happy to see that 7 of my 10 rounds all grouped nicely within the 1.5 inch bullseye and only 3 came out just slightly increasing the grouping to around 2 inches but still closer to 1.5 inches. When I switched over to full auto and emptied the 300 round magazine into the target, amazingly the grouping still seemed to stay pretty close to 2 inches in diameter with some stragglers. The ICS CPX-APE SF1 AEG Airsoft Rifle punched a satisfying hole in my target going through several layers of cardboard.
As you can see in this YouTube Field Test Shooting Video the ICS CPX-APE SF1 AEG Airsoft Rifle performed very well for me living up to its pristine price point. You will pay top dollar for the ICS CPX-APE SF1 AEG Airsoft Rifle but will also get top quality with a ton fo features including an almost all metal/aluminum build, ambidextrous controls throughout, tons of add on capabilities using the 5 sided Keymod hand-gurd, fully adjustable folding stock and exceptional performance.
Type: AEG EBB Airsoft. Manufacturer: ICS Model: CPX-APE SF1 Materials: Mostly Metal/Aluminum. Weight: 6.4 pounds (2900 grams). Length: 25.2 inches folded / 32.5-36.2 unfolded. Hop-up: Yes adjustable. Propulsion: AEG EBB (Electric Blowback). Action: Semi & Full Auto single action only electric trigger. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 300 rounds. FPS: 460 fps.
Trigger Pull: The trigger pull on the ICS CPX-APE SF1 AEG Airsoft Rifle is pretty much like most AEG Electric trigger operated Airsoft Rifles. Usually mid range, light and with no real noticeable release point since it is an electric on and on switch at the end of the day and not really mechanical. Of course you can elect between semi and full auto operation at will.
Accuracy: I have not done my actual Field Test Shooting video review for the ICS CPX-APE SF1 AEG Airsoft Rifle but plan to tackle this video next on my list so this week for sure, stay posted of this one as I have not Field Tested any ICS Airsoft Rifles to date and really don’t know what to expect!
Build Quality: The G&G ICS CPX-APE SF1 AEG Airsoft Rifle is extremely well made as the price tag would suggest. You are going to find metal almost everywhere on this product including the all aluminum upper receiver. The only plastic I could find on the ICS CPX-APE SF1 AEG Airsoft Rifle was in the magazine and the folding butt stock. Everything else is metal/aluminum including the upper and lowe receivers, the sights, the rails and all of the controls. Fit and finish feels great as-well!
Realism: The ICS CPX-APE SF1 AEG Airsoft Rifle is not a replica so to speak of any one particular gun in production but does have some AR and perhaps SCAR attributes to it. Perhaps there needs to be a real steel version of this gun as it does combine a bit of the best of a both platforms. The ICS CPX-APE SF1 AEG Airsoft Rifle is sold for sure with great weigth and feel to it being that it is mostly metal. All the controls work exactly like you would expect on a the real powder burner and you can totally take this Airsoft rifle apart in just a minute or two with virtually no tools.
Mostly metal construction with full aluminum upper receiver.
Tons of rail attachment options with the 5 sided Keymod rail hand-guard.
Fully adjustable pop-up iron sights.
Most everything is ambidextrous: Selector switch, Magazine release, Charging handle, Sling mount.
Rear folding stock has tons of positions, 6 in length and 5 for cheek rest.
Super easy access to everything, hop-up, gear box, inner barrel, outer barrel.
Electric blowback system for slight recoil effect.
T-window in magazine for quick ammunition checks.
FPS is nice and high, great for longer range shooting.
Cons:
On the expensive side but very high quality.
Limited battery options as space for a battery is tight.
May have a bit too high of fps for closer quarter indoor Airsoft games.
Comments:
The ICS CPX-APE SF1 AEG Airsoft Rifle is not an inexpensive product and may be a bit out of touch for Airsofters on a tighter budget. That said it is really well thought out and well built Airsoft product that is ready to go with no real upgrading required. You may want to show on an optical or red dot sigh, perhaps a tac light or fore grip? Nothing you need right away. There really isn’t one thing I can point out that makes this gun so great, it is a combination of everything. when it comes down to it the ICS CPX-APE SF1 AEG Airsoft Rifle kind of has it all going for it. I am looking forward to seeing just how well it performs during my Indoor Field Test. I have high hopes!
It was a decent day today, not too cold and not raining at least at the time I and ethics video :) I figured with my new Insta60 One R and iVUE Vista cameras it would be a great day to test them out outside shooting with my G&G SMC-9 Full Auto Airsoft Carbine. I like the bak for more regulated Indoor Field Tests, these outside usually clay pigeon shooting videos are a lot more fun and I think a nice break for everyone.
So in this video I have three cameras rolling and switch camera switch back and forth throughout the video to make the experience more immersive. I have cameras setup front and back (Sony RX100 IV in front & Sony HDR-AS15 Back), along with my iVUE camera glasses and my Insta360 One R mounted to the barrel of my G&G SMC-9. All in all I think the video turned out well. It may be time to upgrade my Sony Action Camera as it is probably the oldest camera in my collection and you can see in the video it does not look as good as the other cameras.
