• Make sure to also checkout my Table Top Review for the KJWorks KP-06

I like shooting 1911 styled pistols, the KJWorks KP-06 1911 HI-CAPA Blowback Airsoft Pistol is no exception, it's a bit beefier in terms of overall size and even handle grip thickness but held well for me.

So let's get right to the test results! I started off by shooting 5 rounds through my Chronograph using a brand new CO2 along with .25 gram plastic Airsoft BB's. My 5 shot average velocity was 329 fps and the temperature on this day was not too warm, perhaps around 15-18 Celsius. So on a warmer day you can expect to get higher fps out of the KJWorks KP-06 Airsoft Pistol.

Moving on to the Target accuracy performance, I shot 10 .25 gram rounds using the KJWorks KP-06 from a 30 foot distance using a semi rested position (Sand bag in the front, standing in the back). I was able to place the bulk of the shots within a 1.5 inch group but one shot came out extending the group to about 2 inches. Overall the placement was fairly well centered on target, just a hair to the right but one could easily adjust the green dot sights for both windage and/or elevation as required.

The single action 1911 type trigger is exactly what you would expect from a 1911, short, light and crisp. The blowback action is very solid and this pistol settles down after each shot very quickly. If you don't mind a 1911 styled Airsoft pistol with a bit bulkier size than the KJWorks KP-06 1911 HI-CAPA may just make a good choice.

Buy the KJWorks KP-06 Blowback Airsoft Pistol in Canada

I've already done a full Table Top Review that included a Pre-test for this war pistol replica where you will find more details and specifications for the KWC Mauser Airsoft pistol.

In this official Field Test Shooting Video, I do my standard Chronograph test where I shoot a series of .25 gram 6mm Plastic Airsoft BB's using a brand new CO2 cartridge to see what kind of real word Feet Per Second performance I can get out of the KWC Mauser CO2 Blowback Airsoft Pistol. On this medium temperature day I averaged a very quick 415 fps which may be a bit hot for most Airsoft matches. The temperature was fairly cool at 14 Celsius or 57 Fahrenheit so the fps will only get faster on a warmer day.

During my Accuracy Shooting Test, I set myself up 30 feet away using a semi-rested stance (Sand bag up front, standing in the back). I did have to adjust my rear sight to the lowest position and even then I found that I needed to aim at the lowest ring on the target to get my shots close to the center and even then they placed a bit high. Even though the KWC Mauser Airsoft Pistol shot high the results where very good, resulting in a 10 shot grouping in the 1.5 to 2 inch range!

Overall I really enjoyed shooting the KWC Mauser CO2 Blowback Airsoft Pistol, the trigger is super nice and short with a light single action release. The blowback action is very quick and snappy which really makes the full auto rate of fire very high. You will go through a 21 round magazine in a hurry! It is a sample or prototype pistol and I would imagine that KWC could work on getting the FPS juts a bit lower so it would be more usable in an Airsoft Game, and while they're at it they should bring the shot placement down just a bit. Other than that it's a really great Airsoft War pistol replica worthy of addition to anyone collection.

Buy KWC Mauser Products in the Canada Store

I've already done a full Table Top Review that included a Pre-test for this pistol where you will find more details and specifications for this KWC Luger P-08 Airsoft replica pistol.

In this official Field Test Shooting Video, I do my standard Chronograph test where I shoot a series of .25 gram 6mm Plastic Airsoft BB's using a brand new CO2 cartridge to see what kind of real word Feet Per Second performance I can get out of the KWC P-08 Luger CO2 Blowback Airsoft Pistol. On this medium temperature day I averaged 335 fps which is a nice velocity for most Airsoft matches. The temperature was fairly cool at 14 Celsius or 57 Fahrenheit.

During my Accuracy Shooting Test, I set myself up 30 feet away using a semi-rested stance (Sand bag up front, standing in the back). I did have to adjust my aim point at the lowest ring on the target to get my shots near the center. The results where not my best for the KWC P-08 Luger CO2 Blowback Airsoft Pistol, or perhaps this pistols best performance, resulting in a 10 shot grouping in the 4 inch range. Pretty sure this Airsoft pistol can do better!

Overall I thoroughly enjoyed shooting the KWC P-08 Luger CO2 Blowback Airsoft Pistol, the trigger is nice, short and light and the blowback action reminded me a lot of the more sluggish blowback you get from a 1911 styled pistol. You can't help but notice the toggle popping up with every shot which can be distracting at first but it sure comes in handy when it locks back on the last shot clearly indicating that the pistol is empty of rounds. The KWC P-08 Luger CO2 Blowback Pistol is for sure an Airsoft replica any war pistol enthusiast will want to have.

Buy KWC Products in the Canada Store

Type: Airsoft Pistol.

Manufacturer:KWC.

Model:Mauser (M1932 / M712 Schnellfeuer).

Materials: Almost entirely all Metal.

Weight: 3.15 pounds (1424 grams).

Barrel: 5 inches, metal non-rifled.

Propulsion: 12 gram CO2.

Action: Semi & full auto, single action only with full blowback.

Ammunition Type: 6mm Plastic Airsoft BB's.

Ammunition Capacity: 21 round full size drop out metal magazine.

FPS: 400+.

Trigger Pull: The Single Action Only trigger pull on the KWC Mauser CO2 Blowback Airsoft Pistol is what you would expect from a full blowback, true single action only pistol, it has a little bit of take-up and then a smooth fairly light release. Of course when in full auto mode, just press and hold the trigger till the ammo is gone, but don't hold the trigger too long since when the BB's run out, the gun will keep firing as there is no bolt lock back on empty.

Accuracy: It took me a while to figure out exactly where this pistol was actually shooting, but once I realized the KWC Mauser was shooting way high and I adjusted the rear sight all the way to the bottom, I started getting shots at least on to the paper, I did have to hold really low to get near the bulls eye but keep in mind this is a sample pre-production model so some modifications may be in order to correct the rather high shot placement. Over all the accuracy at 30 feet out was very good with about a 2 inch group from 10 shots. Full auto was as you would expect, more of a spray and pray. I do have to say I was surprised by the feet per second performance, even with .25 gram Airsoft BB's I still shot well over 400 fps on a new CO2 cartridge.

Build Quality: The KWC Mauser CO2 Blowback Airsoft Pistol is well built being that it is pretty much entirely metal. It weighs in at a whopping 3.15 pounds so be prepared for a heavier gun but you can choose to hold it two handed by using the forward magazine as a sort of fore-grip. Again this was a pre-production sample but even so the fit and finish looked and felt good. I really liked the dark grey finish and very believable plastic wood grain grips.

Realism: The KWC Mauser Airsoft Pistol is spot on replica of the M1932 / M712 Schnellfeuer with as far as I can tell all the same working parts including the semi and full auto selector switch. The KWC Mauser also has a full working bolt, hammer, safety, adjustable rear sight and of course full size drop out metal magazine that holds the CO2 and Airsoft BB's.

Purchase from:The Replica Airguns Store

Pros:

• Nice quick snappy blowback.

• Lots of metal and good overall weight - very heavy

• Very high fps and good accuracy.

• Very good replica of a real Mauser (M1932 / M712 Schnellfeuer) with all working parts.

• Nice short single action light trigger.

• Shoots in both semi and full auto selectable.

• Will come in 4.5mm Steel BB and 6mm Plastic Airsoft.

Cons:

• Bolt does not lock back on last shot.

• Seemed to shoot really high even when adjusted as low as possible.

• Not totally sure when we will have it in stock?

Comments:

Overall the KWC Mauser CO2 Blowback Airsoft Pistol is that all metal version we kind of hoped Umarex had made, and from what I can tell in the KWC product brochure, this one should be available in both 4.5mm Steel BB and 6mm Plastic Airsoft so this should make everyone pretty happy :) Other than the rather high shot placement I really liked the KWC Mauser especially the super high fps and ultra fast rate of fire in full auto mode. Another must have classic war pistol to add to the collection!

My Vimeo Video Review for the KWC Mauser CO2 Blowback Airsoft Pistol:

Buy KWC Mauser Products in the Canada Store

I have some really new guns from KWC for you today, so new that we don't even stock them yet (hopefully soon) and one of then is an un-marked and un-branded sample version that didn't even come in a proper box. Pretty sure this will be the first YouTube video review of it!

It's great that we are starting to see more of the classic older guns, it really give you a chance to appreciate some of the original designs that helped the development of the more modern guns we now have today.

In this preview-review video we take a quick look at the KWC P-08 Luger and KWC Mauser C96 CO2 powered Blowback Airsoft pistols. I will be doing a full table top and field test shooting video for each gun so make sure to check back for them later. I even do a quick comparison to the same style 4.5mm BB pistol offerings from Umarex I already reviewed, the Umarex P-08 and Umarex C96.

Both the KWC P-08 Luger and C96 Mauser are pretty much all metal with full drop out magazines that hold the CO2 and the 6mm plastic Airsoft BB's, the KWC luger holds 15 rounds while the KWC Mauser holds 19 rounds. Since both Airsoft pistols are full metal they come in nice and heavy with the C96 Mauser weighing just a hair over 3 pounds and the P-08 just a bit under 2 pounds. Both pistols have full blowback operation with very nice single action only triggers and while the P-08 shoots in semi-auto only the C96 can select fire in semi and full-auto modes.

According to the KWC product brochure, both of these new classic CO2 blowback pistols will be offered in 4.5mm Steel BB and 6mm Plastics Airsoft versions. As of right now we do not have any in stock as we are planning an order based on these two samples. We like what we see and will be bringing them in to our Canada and possible US online store so stay posted as once we have verification of an order on rout, we will be offering a pre-sale option so you can reserve yours.

Watch my preview-review of the KWC P-08 Luger and Mauser C96 CO2 Blowback Airsoft Pistols:

Buy KWC Products in the Canada Store

Buy Umarex Products in the Canada Store

• Make sure to also checkout my Field Test Shooting Review for the KJWorks KP-06

Type: 6mm Plastic BB Airsoft Pistols.

Manufacturer:KJWORKS.

Model: KP-06 (1911 HI-CAPA Replica)

Materials: Metal slide & frame.

Weight: 2.6 pounds (1180 grams).

Barrel: Metalnon-rifled smooth bore.

Propulsion: 12 gram CO2.

Action: Blowback, Single action only.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 28 rounds.

FPS: 366+ fps.

Trigger Pull: The trigger pull on the KJWORKS KP-06 is what you would expect from a true 1911 single action only trigger, it has very little take up with a smooth crisp and super light release to it.

Accuracy: I shot the KJWORKS HI-CAPA KP-06 from 30 feet out in semi rested position and got very good test results. I was able to place 10 rounds in the 2 inch range with most of the shots being very well centered (sights can be adjusted for windage and elevation if need be). The KJWORKS HP-06 1911 styled HI-CAPA Airsoft Replica shot right around 331 fps range on this mid temperature day while conducting my 5 shot average chronograph test. The blowback recoil is very heavy heavy due to the large full length blowback slide and the green fiber optic sights are a joy to use.

Build Quality: As expected, the KJWORKS KP-06 build quality is just like all the other KJWORKS Airsoft guns I've tested so far, excellent the fit and finish is the best in my opinion even when compared to my my 4.5mm steel BB shooters. When using these guns regularly, areas that are painted like the metal friction areas show very light wear which is rarely the case with metal built blowback airguns. Again the tolerances between the moving parts like the slide and frame are very tight showing excellent workmanship and machining from KJWorks.

Realism: The KJWORKS KP-06 6mm Airsoft Pistol is a replica of a Tactical High Capacity styled 1911 45 Auto and is a great looking and functioning replica. You will not find any actual licensing on this pistol and the CO2 magazine does stick out a bit to accommodate the 12 gram CO2 but other than that this Airsoft pistol looks and works near exactly like a real 1911 tactical semi auto and is fully field strip-able.

Available in the: Replica Airguns Store

Pros:

• Pretty much all metal pistol with good weight to it.

• Full length heavy blowback operation.

• Excellent fit and finish as always with KJWorks pistols.

• High capacity full size drop out magazine that holds 28 rounds.

• Very accuracy and well centered on target.

• Like the green dot fiber optic sights and fully adjustable rear sight.

• Like the stainless highlights and ambidextrous safety and long rail for accessories.

• Field strip-able.

Cons:

• Grips are wide, may not fit the hands of small shooters.

• FPS was not super high but gets the job done.

• To fully field strip this pistol requires tools.

Comments:

The KJWorks KP-06 1911 HI-CAPA is another excellent full blowback Airsoft pistol from KJWorks. It is a rather large Airsoft pistol, overall wider, longer and thicker than a standard 1911 so small hands may not be suited to this pistol but if you can manage the KJWorks KP-06, you will be treated with a very responsive and highly reliable Airsoft gun. I really like the updated more tactical add ons like the super long tactical lower rail, machined trigger and hammer, fiber optic adjustable sights, textured grips and ambidextrous safety. The quality on all KJWorks Airsoft guns is top notch so yes they do cost a bit more but you really do get what you pay for here, the KJWorks HI-CAPA KP-06 will look good and perform well for a very long time so your return on investment is well worth it!

My Vimeo Table Top  Review of the KJWorks KP-06 Blowback Airsoft Pistol:

Buy the KJWorks KP-06 Blowback Airsoft Pistol in Canada

In this Vimeo Update Video I show you around some new Pistols recently added to the Replica Airguns Canada Store.

First up, the KJWorks KP-06 1911 HI-CAPA Blowback CO2 Airsoft Pistol in 6mm Airsoft BB. A very sturdy all metal double stack (HI-CAPA) tactical 1911 with excellent fit and finish and performance to match:

• Made by KJWorks.

• CO2 Semi Auto Blowback.

• Mostly Metal Design.

• Full sized drop out metal magazine hold BB's and CO2.

• 12 gram CO2.

• 6mm Airsoft Plastic BB's.

• 28 shot magazine.

• 2.6 pounds (1180 grams).

• Single Action Only.

• 366+ fps.

Next we have the Cybergun Model 75 Tac Blowback CO2 BB Pistol in 4.5mm Steel BB, basically a simplified and more compact version of the Cybergun Tanfoglio Gold Custom: 

• Blowback all metal design.

• Dark Golden brown.

• 12 gram CO2 .

• 4.5mm steel BBs.

• 17 shot full size drop out metal magazine.

• 2.53 pounds (1150 Grams).

• Single Action Only.

• 325 fps.

• Spin up shooting system. 

Make sure to check out my Vimeo Preview Update video showcasing both of these fine CO2 blowback Pistols and stop by the Canada Replica Airguns Store and pick one up!

Buy the KJWorks KP-06 Blowback Airsoft Pistol in Canada

Buy the KWC Model 75 Tac Blowback BB Pistol in Canada

In this Comparison video I go through the benefits and shortcomings of both Blowback and Non-Blowback Airguns. I focus mainly on Airguns but there is a definite crossover with Airsoft guns.

Here are some basic statements that best describe both Blowback and Non-Blowback Airguns.

Blowback Airguns:

• Blowback Airguns usually have a movable slide that moves back and forth with each shot.

• Sometimes the blowback operation is internal (Internal bolt) so there may not be an external moveable slide.

• Some CO2 is used to move the slide rearwards in a Blowback Airgun.

• The Blowback motion of the slide with some blowback airguns can also cock the hammer or internal striker allowing for true single action trigger pull. But not always!

• Some Blowback airguns have the potential for full auto capabilities since they can have a true semi auto action.

• There is some noticeable recoil from the Blowback action simulating the recoil of a real gun.

Non-Blowback Airguns:

• Non-Blowback Airguns can have fixed or movable slides but they will not cycle back and forth with each shot.

• Non-Blowback Airguns tend to have less working parts since no Blowback valves are required or even a moveable slide.

• There are some Blowback and Non-Blowback Airguns that field strip similarly to their real steel counterparts but this is most commonly found in Blowback Airguns.

• Non-Blowback Airguns require the shooter to cock the hammer for single action shooting or use a double action trigger pull for semi auto like performance.

Pros:

Blowback Airguns:

• Blowback Action causes a noticeable recoil which makes the airgun feel more realistic.

• Blowback Airguns in some cases have true semi auto action with true single action triggers which mimic the authenticity of the real steel versions of the guns they replicate much better making them better training tools.

• Having some recoil makes blowback Airguns potentially better training tools.

• Blowback Airguns look really cool when shooting them  and are great action prop guns.

Non-Blowback Airguns:

• Non-Blowback Airguns tend to have less working parts so less to go wrong and more reliability.

• Non-Blowback Airguns can be more accurate since the recoil from the blowback is not a factor.

• Non-Blowback Airguns have more potential power and more shots per CO2 since no CO2 is robbed for the blowback operation.

Cons:

Blowback Airguns:

• Blowback operation can rob some of the power and will also rob how many shots you get from the Airgun.

• Blowback Airguns are effected even more by cold weather and the cool down effect.

• The recoil from Blowback Airguns can effect accuracy for some shooters.

Non-Blowback Airguns:

• Non-Blowback airguns are generally double action when shooting semi auto and so the trigger pull will be longer and heavier.

• Non-Blowback Airguns do not replicate the recoil action of a real gun.

• Non-Blowback Airguns do not look as cool to shoot and are not as good of an action prop gun.

Is an Airgun Good for Self Defense? Another one of those questions I get asked fairly often that's a bit hard to answer in a few sentences... Not all of us have easy access to a 9mm pistol or even a rifle but many of us can get our hands on an airgun fairly easily and they look real enough, I guess that is one thing they have going for them.

But what if the mere sight of what looks like a gun does not scare an intruder off? If you where hoping that would be enough, you may just be out of luck and what if you just brought an Airgun to a "real" gun fight? You are going to be drastically "outgunned" pun intended and here's why. A 4.5mm Steel BB weighs about 5.1 grains and generally you are looking at about 2-3 foot pounds of energy from a CO2 BB gun. Even a .177 caliber lead pellet is only marginally heavier at around 7-8 grains and if you're really lucky you might just get 4 foot pounds of energy out of a CO2 pellet pistol.

So let's take a look at a fairly conservative "real pistol" rounds, the 9mm. The 9mm rounds come in different bullet weighs but you can get a 120 grain 9mm in a plus p ammo with as much as 400 foot pounds of energy and even with that much raw power, many people claim that a 9mm round does not always have enough stopping power to put down a person even when shot multiple times center mass. It just depends what vital organs or arteries you hit that determines if he gets lucky or you get lucky.

Your 5.1 grain 4.5mm Steel BB is not going to do anything if it hits any type of clothing and even if you find some flesh it's just going to piss off the intruder.

My suggestion is to consider a bat or a golf club or a really big knife or just about anything other than an airgun because if the sight of the airgun replica does not scare an intrude away then you are really buggered.

Keep in mind that you need to abide by any laws regarding the use of self defense in your areas. Even just physical force could be considered a crime and at the end of the day you are ultimately accountable for your actions.

I get asked about what cameras I use fairly often so a while back I made a video showing some of the cameras I used at that time. Since that video was made I have been using a newer pair of "HD Camera Glasses" called Pivothead Recons' which I really like and are very good quality and are perfect for that first person video camera angle.

In this video review, I show you around my pair of Pivothead Recon 1080p HD Camera Glasses and include some footage taken with them. I talk a bit about the specifications but have included the below specs right off of Pivothead's website to make sure it all gets covered:

OPTICS

4 ELEMENT GLASS LENS

Largan Glass Camera Lens

FOCUS

Recon'sContinuosFocus | Auto Focus: 4”- | Fixed focus: 2.8’ – | Macro 4”- 28”

FIELD OF VIEW

75 Degrees

IMAGE SENSOR

8MP Sony CMOS

RAM

2GB SDRAM

VIDEO

RESOLUTION

1080p@30fps | 720p@60fps | 720p@30fps

VIDEO FORMAT

Mp4 H.264

EXPOSURE

Auto | Bright | Dim

VIDEO OPTIONAL SETTING

Black & White | Face Tracking | Time/Date Stamp

AUDIO FORMAT

AAC MONO

44.1 kHz

PHOTO

IMAGE SIZE OPTIONS

8MP | 5MP | 3MP

BURST OPTIONS

16 Shot Stills | 10 Shot Stills | 5 Shot Stills | 3 Shot Stills

TIME LAPSE OPTION

1 Shot/1s | 1 Shot/30s | 4 Shots/8s

4 Shots/30s | 10 Shots/30s | 5 Shots/60s

FOCUS

Auto | Macro

EXPOSURE

Auto | Bright | Dim

ISO

Auto | 200 | 800 | 1600

PHOTO OPTIONAL SETTING

Black & White | Face Tracking | Time/Date Stamp

STORAGE

INTERNAL MEMORY

8GB

INTERFACE

USB CABLE

USB 2.0 Cable for Charging and Data Transfer

POWER

RECHARGEABLE

Rechargeable 3.7VLi-Polymer/440mAh

DC POWER

USB power via Micro USB, 5V DC 500mA

OPERATING SYSTEM

SYSTEM

Mac | PC | Android

PRE SET MODES

Active | Action Sport | Power Save

Spectator | Hands On (Macro) | Social | Black & White

CERTIFICATION

FCC | FDA | CE

Make sure to watch my Vimeo Video Review of the Pivothead Recon HD Video Glasses:

Type: Airsoft AR M16 Styled Rifle.

Manufacturer:G&G.

Model:CM16 Carbine GBB.

Materials: Metal and plastic/fiber construction.

Weight: 5 pounds.

Barrel: 10 inches, metal non-rifled.

Propulsion: GBB

Action: Semi & full auto blowback.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 30+ round magazine.

FPS: 370+.

I could pretty much copy and paste my review of my G&G CM16 Raider GBB since both of these guns are pretty much the same Airsoft Rifle with different finishings. Instead I will place a link to my G&G CM16 RaiderVersion 2 GBB AR Airsoft Rifle Review and insert some nice photos of the  G&G CM16 Carbine version for you to admire :)

Buy the G&G CM16 Raider GBB Airsoft Rifle in Canada - Buy G&G Airsoft Rifles in the US

I stopped by the ICS Booth, we don't sell too much of their products but have carried a few items from time to time. ICS caries some nice quality Airsoft guns including the M1 Grand with real wood stock, and some AK & AR variants.

One of our suppliers had the new FN Herstal Five-seveN Blowback Airsoft pistol, I believe made by Marushin. Like the real FN Herstal Five-seveN, the pistol is pretty much all polymer including the slide and frame. This pistol also uses CO2 in the full size drop out magazine which should make it fairly powerful.

Looks like there is another Dan Wesson contender available now in the form of a Swiss Arms S&W 357 Magnum 4 inch and 6 inch barreled version, they look really nice and like the Dan Wesson have the realistic reusable brass shells that hold the 4.5mm Steel BB's.

Ever considered owning a  mobile Gunsmith vehicle, look no further, I came across this pimped out Firearms Van complete with machine guns mounted in the front :) Inside was a complete firearms workshop.

Last but not least, we had some fun while in Vegas. I go down for the SHOT Show for business but I also bring my wife and we make time for some non business related activities. I generally stay at the WorldMark resort each time and this year the weather was pretty nice so we where able to get some sun by the pool a couple of days and I even got a tan line! Of course the food and entertainment is always awesome in Vegas.

We carry a lot of the G&G line and perhaps have as much in stock as you would find at the G& G booth ;) I did see a few items we do not have in stock so I will have to see what I can do about that. Some products that I hope to see added to our Canada Replica Airguns Store would for sure be the M1 Grand and our Canadian Military Colt C7A1/2.

One company I took notice of was Inokatsu, they make super high quality Airsoft guns. I was drawn to their Sig Sauer P229 and 1911 pistols that by the way are made out of real steel and as close to the real version as possible without it being a real gun. The Inokatsu pistols I looked at are not cheap and will set you back over a grand but are as close as you can get to a real sidearm as possible in an Airsoft version. They feel amazing to shoot with heavy blowback and that sound real steel makes when the slide snaps back.

Let me know if you're like me and would be willing to part with a substantial amount of money for one of these treasures? 

I also visited my friends at the ASG booth but for some reason I did not get a photo  of their booth? I do have some video walk through stuff I will show you in my YouTube Video coverage of this years Vegas SHOT Show. Most importantly I have lots of gun photos so let's take a look at them...

One of my favorite ASG pistols is the Bersa BP9CC, I have already reviewed it and I just really like how this gun looks and holds, ASG took it one step further this year by adding a two-tone silver version and I have to say it looks awesome in person, my photos do not do it justice at all :(

A new handgun to the ASG blowback pistol series is the CZ P-09 Duty Pellet pistol. Basically it shares similar mechanics to the Umarex PX4 and Gamo PT-85 using the double sided rotary pellet magazine with 8 shots located on each end of the stick magazine. The ASG CZ P-09 Duty features a metal slide, working hammer and safety.

Another pellets pistol that should be very familiar to most of you is the new .177 caliber pellet shooting Dan Wesson in 6 inch silver and 8 inch black versions. ASG added a rifled barrel and redesigned solid brass shells that hold pellets instead of 4.5mm Steel BB's. Expect to take a little bit longer to reload the pellets as unscrewing the tip of each shell is required to place a .177 caliber pellet in each bullet tip.

Of course ASG has tons of licensed pistols to choose from, many on both 4.5mm Steel BB and 6mm Plastic Airsoft!

One new rifle that stood out to me was the ASG CZ Scorpion EVO 3 A1 AEG Airsoft Rifle, the Scorpion features an intelligent AEG system that detects when there may be a potential feeding problem and also when the magazine is out of ammo.

So it's 2014 but I still needed to make my 2013 Airgun, Airsoft Gun and Blank Gun Collection Favorites for 2013. It's become a tradition I guess you could say. No I do not show all the guns in my collection but I do cover most of my favorites and also some new guns I picked up in 2013.

Here's a peek but make sure to watch the YouTube video bellow where I go over all my top picks for 2013. You can also buy many of the guns I show in this YouTube video over in our Canada and US Replica Airguns Store!

2013 BB Pistols

2013 Pellet Pistols

2013 Airsoft Pistols

2013 Blank Pistols

2013 Rifles

Type: GBB Airsoft Machine Pistol (Used).

Manufacturer: KSC

Model: Cobra M11A1

Materials: Plastic and metal.

Weight: 2.9 pounds (1315 grams).

Barrel: Metal non-rifled.

Propulsion: GBB.

Action: Single action only.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 40 rounds.

FPS: 300+ fps.

Trigger Pull: The trigger pull on the KSC M11A1 GBB Airsoft Machine Pistol is pretty much exactly what you would expect from this fast firing single action only semi and full auto machine pistol, it has a really short take-up and then a nice crisp light trigger pull. Since it is an open bolt system, you will need to pull back the bolt for the first shot, releasing the trigger releases the bolt, just like with a real M11A1.

Accuracy: At this point because I received this gun from another collector in used condition, it is not working 100%, the hop-up bucking was damaged and the new ones I ordered are not the correct versions for this Airsoft gun. It does shoot but it is temperamental, sometimes the bolt will not cycle all the way and I have no idea how this is effecting the fps and accuracy. It would not be fair to test it in this condition, hopefully I can find the right hop-up bucking for it and do the Field Test Shooting Review at some point.

Build Quality: MyKSC M11A1 GBB Airsoft Machine Pistol has been used a fair bit so it is somewhat battle scarred, still it looks pretty good and other than the Hop-up bucking problem I am having it should be in working condition, unfortunately without the correct hop-up bucking, this gun will not work properly. Hopefully I can find a hop-up bucking? Even though much of this machine pistol is plastic externally, it has held up very well, the metal parts do also help to balance it off and give it a decent overall 3 pound weight which feels good considering it is such a small gun. 

Realism: The KSC M11A1 GBB Airsoft Machine Pistol is a very close copy of the real steel Cobra M11A1 Machine Pistol, all the parts appear to function just like the original Cobra RPB Industries M11A1 and it even field strips in the same manor. The full licensing and trademarks also help to make this replica very believable.

Reviewed by:ReplicaAirguns.com

Pros:

• Very realistic and accurate replica with full Cobra RPB Industries licensing.

• Even though there is lots of external polymer, it still has good weight to it.

• Full metal 40 round drop out magazine, holds BB's and Gas.

• Everything works like the original, field strips and lots of mechanical parts. 

• Shoots in both semi and full auto.

Cons:

• Hard to get here in Canada and hard to get parts here in Canada.

• Mostly plastic main build - Limited usage of metal and steel.

• Have no idea how it will perform because it is not functioning at 100%.

Comments:

Well I've pretty much said everything I can say without actually shooting it? Even though my used KSC M11A1 GBB Airsoft Machine Pistol is not in 100% working condition, I still like having it as I like the replica aspects of owning it, how else would I get my hands on a .380 caliber full auto machine pistol here in Canada ;) And you never know, I may just luck out and find the proper hop-up bucking for it and then have the chance to do my Field Test Shooting Review for you all :)

My Vimeo Table Top  Review of the KSC M11A1 GBB Airsoft Machine Pistol:

Buy BB Mini UZI in Canada

Buy BB Mini UZI in the US

• Watch my Table Top Review for the G&G GS-801

I struggled a bit with this pistol during this Field Test Shooting review, mainly just in the accuracy portion. Perhaps the G&G GS-801 CO2 Blowback Airsoft Pistol did not like the .36 gram BB's I was using, maybe a bit too heavy or perhaps the hop-up did not agree with the size of this Airsoft round. Either way, my accuracy test did not do so well! I may give this gun another go at some point using a different Airsoft BB and perhaps simply using the iron sights over the built in laser just in case that was the issue?

As per usual, I tested this pistol out using my Chronograph to see what kind of actual feet per second rating I get from it. I fired 5 rounds from the G&G GS-801 using .20 gram plastic Airsoft BB's and this CO2 semi auto blowback pistol shot a very speedy 415 fps average.

Next up was the accuracy test, I decided to setup at the 30 foot mark and I shot a total of 10 rounds from my G&G GS-801 CO2 Blowback Airsoft Pistol using a semi rested position, (sand bag for a hand rest and standing in the back). My grouping was all over the place vertically (about 6 inches) but not so bad horizontally (about 2 inches). It makes me wonder if the hop-up was playing into it or maybe my laser sight was moving around up and down?

The trigger pull on the G&G GS-801 CO2 Blowback Airsoft Pistol is kind of different, it is single action only since the blowback action cocks the hammer back with each shot. There is a fair amount of take up with next to no resistance followed by the release point which seems kind of heavy after the soft take-up section, you need to keep applying pressure and then with no real movement it will just suddenly release so it's kind of hard to predict without practice. During the take-up portion of the trigger pull, a BB is loaded into the barrel and the laser sight will automatically turn on if you have the laser in the active position.

Over all the G&G GS-801 CO2 Blowback Airsoft Pistol is a well put together Semi Auto Pistol, it looks good, performs nice and hot and is a lot of fun to shoot, I would have liked to have seen better accuracy from it but in a heated Airsoft battle at close range, the built in laser will get you on target quickly and as long as you are not shooting at really long ranges you should be just fine.

Buy the G&G GS-801 Airsoft Pistol in Canada  -  Buy Airsoft Pistols in the US

Since both the Gold ASG Dan Wesson and the G&G G731 Airsoft Revolvers both have the 2.5 inch barrels on them and in many ways are very similar (at least mechanically), I thought I would not only do my Table Top Review but also my Field Test Shooting Review using both guns side by side so we can really get an idea of how they perform and compare.

As per usual, I test both pistols out on my Chronograph to see what kind of real world feet per second rating I get, since they are 6 shot Revolvers, I fired 6 single action rounds from each gun using .20 gram plastic Airsoft BB's and averaged out the string. Both guns shot a little bit over 400 fps with the Dan Wesson having just a bit of a higher fps over the G&G G731.

Next up was the accuracy test, I decided to setup at my 30 foot mark so that any accuracy differences would be more noticeable, again I shot 6 rounds from each gun while I used a semi rested position, (sand bag for a hand rest and standing in the back). This time I would have to give the slight edge to the G&G G731 as it seemed to shoot just a bit tighter grouping over my Dan Wesson Gold. Both guns shot pretty close to a 2 inch 6 shot group.

Both pistols have pretty decent single and double action triggers, there is a some noticeable friction when shooting in double action due to the way the barrel seals against the cylinder so you may want to shoot in single action when going for the most accurate of shooting.

When it comes to sight picture the Dan Wesson does have a fully adjustable rear sight but the G&G G731 gets the job done with it's simple yet effective grove sight which I kind of preferred with this style of short barreled revolver.

If you want more of that combat look with some Gold Bling than perhaps the Gold ASG Dan Wesson is the one for you? Perhaps you want something like the G&G G731, as compact and simple as it gets that you know you can count on as a backup ready sidearm. There isn't a bad choice here with either of these nice compact Airsoft Revolvers.

Buy ASG Gold Airsoft Pistol in Canada  -  Buy Airsoft Revolvers in the US

Buy G&G G731 Airsoft Pistols in Canada  -  Buy Airsoft Revolvers in the US

Type: Airsoft AR M16 Styled Rifle.

Manufacturer:G&G.

Model:CM16 Raider GBB

Materials: Metal and plastic/fiber construction.

Weight: 5 pounds.

Barrel: 10 inches, metal non-rifled.

Propulsion: GBB

Action: Semi & full auto blowback.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 30+ round magazine.

FPS: 370+.

Trigger Pull: The trigger pull on the G&G AR styled Airsoft CM16 Raider is very smooth, the CM16 Raider uses a mechanical trigger that once the charging handle has been pulled back or "charged", works in a single action only manor with a slight bit of take-up and then a light predictable release. Each time the closed bolt gas blowback system shoots a round in semi or full auto, the internal action is ready for the next single action shot.

Accuracy: So far I have not tested Version 2 of the G&G CM16 Raider, but I have tested Version 1 so here are the result I got with Version 1 until I do my official Field Shooting Test with Version 2. When shooting from a 30 foot distance I did get some nice closely grouped shots from the G&G CM16 Raider Gas Blowback but when shooting in full auto it did spread apart somewhat, maybe from the GBB recoil? Version1 of the G&G CM16 Raider GBB shot an average of just over the 325 fps, I was using .25 gram BB's and it was a cool day so you can expect higher fps out of the G&G CM16 Raider when conditions are better.

Build Quality: The G&G CM16 Raider GBB being built on G&G Combat Machine Platform is targeted more for the price conscience person. The quality is consistent and good and I did not mind having more plastic in the G&G CM16 Raider GBB as my plan from the beginning was to add a lot of extra accessories and starting out with a somewhat lighter footprint made the gun still relatively usable even when all geared up with extra accessories. I also feel the plastic or polymer fiber upper and lower receiver and RIS rail system will also wear better than steel as it is more likely to flex rather than break in many situations, not to mention metal will show scratches and wear more over time.

Realism: Airsoft AR rifles in my opinion are very realistic in general, even the AEG versions work just like the real steel AR's with working charging handles, dust covers, bolts, magazine, adjustable stocks and sights, but I would have to give the advantage to the gas Blowback systems like the G&G CM16 Raider GBB as it has a full internal bolt with some decent recoil, it can also be field striped very similarly to a real AR15 rifle. The shot count is more like what you would find in an M16 or AR rifle which means you will need to consider ammo shot assuage and reloading more carefully when using it in an Airsoft game.

Purchased From: The Replica Airguns Store.

Pros:

• Super affordable Gas Blowback Airsoft AR M16 styled Rifle.

• Very high rate of fire in full auto.

• Polymer shell is both light and very durable, does not show scratches or wear as easily as metal.

• All most every part is operational - Fully Ambidextrous now.

• Can be fully customized, lots of mounting points on the RIS Rail system.

• Fully adjustable Crane Stock.

• Removable rear Iron Sight can be swapped out for other sighting systems and hardware.

• Version 2 is a significant upgrade from Version 1.

• Internals can be swapped over to make it an AEG gun.

Cons:

• Some people may not like the polymer RIS rails and upper and lower receiver?

• Would have liked to have seen some sort of a plate over the pistol grip to finish it off.

Comments:

I already really liked Version 1 of the G&G CM16 Raider GBB Airsoft AR Rifle and even bought a bunch of magazines and gear to sport mine up for use in some local Airsoft games, the upgrades and improvements found in Version 2 are the icing on the cake! I am hoping the internal performance enhancements will increase the FPS just a bit and Gas efficiency somewhat over Version 2 but will find out when I give it a thorough testing shortly. If you have been a bit scared off by the higher prices of some GBB Gas Blowback Airsoft rifles then perhaps take a look at the G&G Combat Machine Platform CM16 Raider in GBB, it may just change your mind about Gas Blowback Airsoft rifles!

My Vimeo Video Review for the G&G CM16 Raider Airsoft GBB AR Styled Airsoft Rifles:

Buy the G&G CM16 Raider GBB Airsoft Rifle in Canada 

Buy G&G Airsoft Rifles in the US