I have another Full Auto Fun Video this one focusing on 4.5mm Steel BB Versus 6mm Plastic and which one is better in terms of accuracy and shredding power. I perform this super scientific test by shooting obviously in full auto two comparable Steel BB and Plastic Airsoft Rifles at a paper target setup 20 feet away with a magazine as a backer so I can see what the accuracy is like and how much of the paper magazine gets shredded by each ammo being tested.
I have split this video into three separate videos, in video one I compare two similar AR styled rifles, a CO2 powered Blowback 4.5mm BB Rifle to a Gas Blowback 6mm Airsoft Rifle. In video two I compare two AK type Blowback Rifles to each otters, again a CO2 4.5mm Steel BB along with a Gas 6mm Airsoft.
And lastly in Video three I compare my top picks for each category which include a non-Blowback CO2 4.5mm BB Machine gun to an AEG 6mm Airsoft Rifle.
I have another Full Auto Fun Video this one focusing on 4.5mm Steel BB Versus 6mm Plastic and which one is better in terms of accuracy and shredding power. I perform this super scientific test by shooting obviously in full auto two comparable Steel BB and Plastic Airsoft Rifles at a paper target setup 20 feet away with a magazine as a backer so I can see what the accuracy is like and how much of the paper magazine gets shredded by each ammo being tested.
I have split this video into three separate videos, in video one I compare two similar AR styled rifles, a CO2 powered Blowback 4.5mm BB Rifle to a Gas Blowback 6mm Airsoft Rifle. In video two I compare two AK type Blowback Rifles to each otters, again a CO2 4.5mm Steel BB along with a Gas 6mm Airsoft.
And lastly in Video three I compare my top picks for each category which include a non-Blowback CO2 4.5mm BB Machine gun to an AEG 6mm Airsoft Rifle.
For this Video 2 Accuracy Test I shoot all of the above listed Airguns at a paper target setup 30 feet down range using a semi rested shooting position with my hands resting on a sand bag up front and seated on a stool in the back. It’s not perfect but works well enough. I didn’t take a ton of time with each gun since there where 4 to shoot in this Field Test Shooting Video so accuracy may have been a bit better if I took a little more time with each gun.
In Video 2 I test the power and penetration of each Airgun option shooting at a pop can, a soup can and a toilet paper roll so make sure to watch that video if you have not already watched it.
For this Video 1 Power Test I shoot all of the above listed Airguns first at a pop can, then a soup can and then a toilet paper roll. The ides is to test penetration abilities with the pop and soup can and then raw force shooting the toilet paper as it will absorb all the energy from each airgun round and by gauging how much the toilet paper reacts or moves it should tell us which airgun has the most raw power or energy.
In Video 2 I will be testing accuracy using my standard 30 round paper target setup in the Replica Airguns Sea Can so stay posted for that upcoming video shortly…
In this Field Test Shooting Video I get outside for a change and test out the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle to see what the actual velocity is and what kind of accuracy I can expect shooting at much further ranges than my Sea Can Airgun Range can offer. If you want to know more about specifications and details for this Break Barrel Air Riffle make sure to watch my Table Top Video for information along with more closeup video.
Starting with the velocity for the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle, Beeman claims up to 475 fps but based on how light the spring feels when cocking this Airgun I was not expecting to get that high of fps. I placed 5 rounds through my Chronograph and was able to average 361 fps using 14.3 grain lead pellets which gave me an energy of 4.14 foot pounds. This isn’t bad in terms of energy but I would not suggest this Air Rifle for pest control because of the lower fps unless you are shooting really small pests at closer ranges.
While I was testing velocity to speed things up I also placed the same rounds on my paper target setup around I would say 80 feet down range (Best guess). Keep in mind I am not the best long range shooter especially with Spring Piston Air Rifles but I was able to get around a 3 inch 5 shot grouping at this distance with three of the shoots all within about 1 inch of each other so not bad for me. I was using the provided Beeman 4x30 optical scope which was nice and crips. My pellet choice was .22 Caliber Crosman Premier Hollow Point 14.3 grain lead Pellets.
What I like about the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle is the easy to cock break barrel, the optical scope, the nice wood finish and its overall performance. I did feel the trigger was a bit heavy and it would be nice to have just a bit more power but that would come at a harder to cock break barrel. If you want an easy shooting and overall good looking lower cost Spring Piston Pellet Rifle in .22 caliber then I would recommend the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle for sure!
Type:Pellet Rifle. Manufacturer: Beeman Model:Longhorn II 10611. Materials: Metal and Polymer. Weight: 8.5 pounds (3.77kg). Barrel: 18 inches (45.7mm). Propulsion: Spring Piston. Action: Single Action Single Shot. Ammunition Type: .177 and .22 Caliber Pellets. Ammunition Capacity: 1. Max FPS: 495 Claimed.
Trigger Pull: The trigger on the Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle is single action only requiring you to break the barrel and compress the internal spring piston before you can shoot it. This will also engage the safety which you have to disengage for each shot manually as an added safety measure. The actual trigger pull is pretty good overall. There is very little take-up but the creep is on the longer side but very smooth not requiring too much pressure. The release is also smooth but will take a bit of time to learn just exactly when it is going to release. There is an adjustment screw for the trigger but it is not advertised or explained in the manual exactly how this effects the trigger pull so a bit of trial and error may improve the trigger feel.
Accuracy: I have not performed any shooting tests with the Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle so far, I hope to make that Video Review next week “weather permitting” as I want to get outdoors for this test to be able to shoot it at longer ranges. I expect the Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle to perform well in the accuracy department especially with the 4x32 optical scope installed. In terms of power I did notice that the spring does seem ot be fairly strong so I am hoping to get close to the claimed 495 fps even using .22 caliber heavier grain pellets.
Build Quality: The Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle is a China made Air Rifle but looks to be well made. It is mostly metal other than the synthetic modern stock, even the iron fiber optic sights are full metal front and back. I am not a big fan of the stock texture patter but it does work to add extra grip.
Realism: The Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle is not a copy of any real steel gun in production but does have that overall rifle shape to it so yet it looks like a gun but most people will be able to immediately see that it is a Pellet Rifle and that is exactly what it is since it is not trying to be anything other than that.
Pros:
Comes with two barrels for .177 and .22 caliber pellets.
Comes with included 4x32 scope and ring mounts.
Durable synthetic stock with modern look and pistol grip.
Can also shoot using included iron metal fiber optic adjustable sights.
Automatic trigger safety system.
Rated at 495 fps using .22 caliber pellets so top out at max Canada legal power without a firearms license.
Nice rubber butt-pad looks good and adds to shooting comfort.
Has a scope stop so your scope will stay nicely in place.
Really well priced for what you get which is two rifles one.
Cons:
Changing out barrels does require tools.
Not a big fan of the stock texturing pattern.
Made in China.
Comments: The Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle is a very affordable Break Barrel Spring Piston Pellet Rifle that offers two Airguns in one with it’s interchangeable barrel system allowing you to shoot either .177 or .22 Caliber pellets. You also have the option of using the already installed Fiber Optic fully adjustable sights or you can install the included 4x32 Optical Scope for potential longer range shooting. The modern looking synthetic stock with it’s pistol grip and rubber butt-pad will make shouldering this Air Rifle super comfortable and I would imagine help with accuracy at the end of the day.
Type:Airsoft Rifle. Manufacturer: Tokyo Marui. Model:CQBR Block1. Materials: Metal and Polymer. Weight: 9.97 pounds (4.52kg). Barrel: 9.84 inches (250mm). Propulsion: Gas Blowback. Action: Semi & Full Auto - SAO trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 35 Max FPS: 350 Tested (.20 gram).
Trigger Pull: The trigger on the Tokyo Marui CQBR Block1 GBB Airsoft Rifle is single action only so the charging handle will need to be engaged on your first shot un less the bolt is already back for a preview empty magazine and reload. The trigger is light and short with virtual no makeup but then just a bit of creep before releasing the internal striker and firing a round.
Accuracy: I did already perform my Field Test Shooting Video for the Tokyo Marui CQBR Block1 GBB Airsoft Rifle so I do have some information to share relating to the shooting abilities of this Gas Blowback Airsoft Rifle. During my Velocity Chronograph Test I was able to average 332 fps using .20 gram Airsfot BB’s with my highest velocity shot hitting 350 fps. My 10 shot grouping at 30 feet away yielded a 1.5 inch spread and when I placed the Tokyo Marui CQBR Block1 GBB Airsoft Rifle in full auto it did open up a fair amount since the blowback action really rocks this gun around a lot making full auto shooting spread out much monroe than semi auto shooting but still so much fun to shoot in full auto :). You can watch my full Field Test Shooting Video here!
Build Quality: The build quality of the Tokyo Marui CQBR Block1 GBB Airsoft Rifle is one of the highest out there with high quality metal parts throughout this GBB AIrsfot Rifle both inside and out. Some of the internals include a heavy duty 19mm blowback piston, New mechanism Z-system to prevent wear and tear of bolt catch, piston absorber and friction relief bolt roller to reduce the burden on internal parts due to bolt operation.
Realism: The Tokyo Marui CQBR Block1 GBB Airsoft Rifle is a near perfect replica of a Colt licensed AR 15 and Tokyo Marui has a ton of detail to the fit and finish including the unique and multiple finishes on the external parts: The rail hand guard, front sight, and stock reproduce the difference in FDE color tone applied to each part as in the real thing. The metal rail hand guard reproduces the color by alumite treatment with excellent scratch resistance. In addition, the upper / lower frame and bolts are made of Ceracoat, which has a strong coating film and excellent scratch resistance.
Pros:
Super high quality GBB Airsoft Rifle.
Bolt locks back for easy hop-up adjustments.
Very heavy blowback operation.
Lots of metal parts, mostly everything except the stock, fore grip and pistol grip.
Lots of mounting points with it’s quad rail setup.
Awesome internals: Heavy duty 19mm blowback piston, New mechanism Z-system to prevent wear and tear of bolt catch, piston absorber and friction relief bolt roller to reduce the burden on internal parts due to bolt operation.
Attention to detail goes beyond expectation! Color reproduction and special surface treatment is a good example of this.
Easy to mount a sling with it’s QD tactical sling mounts on handguard, lower receiver, and stock.
Adjustable hop-up as expected.
6 portion rear stock.
Removable and fully adjustable rear sight.
Great for close and mid range shooting situations with a 350 average fps using .20 gram BB’s.
Accuracy was good at 30 feet getting around a 1.5 inch 10 shot grouping.
Cons:
My magazine did not seem to seal very well in the nozzle area when filling with propane but mag seemed to fill OK, just seemed to waste a bit of gas while filling.
Heavy blowback makes full auto accuracy move around a fair amount.
Pretty much have sue the included magazine filling tube to load BB’s in the magazine sop will need ot be carried with you in a game.
On the very high end of the price spectrum.
Comments: I am a bit of a sucker for Blowback Airguns in general whether it be Pistol, Rifle, BB, Pellet, Paintball or Airsoft. So right out of the box I loved the Tokyo Marui CQBR Block1 GBB Airsoft Rifle with its heavy blowback recoil. All that aside the Tokyo Marui CQBR Block1 GBB Airsoft Rifle is one of the highest quality Gas Blowback AR 15 type Airsoft Rifles you will be able to get your hands on assuming if you can find it in stock. It is a near perfect Airsoft Replica of a real steel Colt AR with only the best finishes and parts available for such a GBB Rifle.
Type:Airsoft Rifle. Manufacturer: Sig Sauer Model:ProForce MCX Virtus. Materials: Metal and Polymer. Weight: 7 pounds (3kg). Barrel: 11.6 inches (295mm). Propulsion: AEG. Action: Semi & Full Auto - SAO Electronic trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 120 (Mid cap). Max FPS: 408 Tested (.20 gram).
Trigger Pull: The trigger on the Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle is essentially a Single Action Only electric on off switch that can allow for semi and full auto shooting along with a safety position based on the sector switch position. Because of this it is fairly short and light weight. There can be a slight delay from the time you pull the trigger to when the BB is released as since the electric motor needs to first pull back the internal spring before being released. A higher voltage battery will shorten the time between your trigger pull and the Airsoft BB release. Higher voltage battery also increases the full auto cycle rate.
Accuracy: I did already perform my Field Test Shooting Video for the Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle so I do have some information to share relating to the shooting abilities of this AEG Airsoft Rifle. During my Velocity Chronograph Test I was able to average 408 fps using .20 gram Airsfot BB’s, that was using the out of the box installed 120 spring. In terms of accuracy, my 10 shot grouping at 30 feet away yielded a 1.5 inch spread and when I placed the Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle in full auto it did not open up that much more, only to around 2 inches since there is virtually no recoil to throw off full auto shot placement. You can watch my full Field Test Shooting Video here!
Build Quality: The build quality of the Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle is exceptional with high quality material inside and out, this Airsoft Rifle is mostly metal with a CNC machined receiver and a hefty 7 pound weight to it. Internally you will find VFC Avalon Gearbox featuring improved bearings, quick change spring system, built in MOSFET, and powered by high torque neodymium magnet motors.
Realism: The Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle is designed and licensed by Sig Sauer to be as close to their real steel version of the MCX Virtus as possible in every way. As expected you will find Sig Sauer and Virtus licensing all over, size, handling and weight are also true to the original.
Pros:
Super high quality AEG Airsoft Rifle.
Bolt locks back for easy hop-up adjustments.
Sig Sauer designed and licensed.
Lots of metal parts including the CNC machined metal receiver, rear stock guide rails and most mechanical moving parts.
Lots of mounting points with it’s full length picatinny top rail with M-LOK handguard.
Awesome internals, VFC Avalon Gearbox, quick change spring system, built in MOSFET, high torque neodymium magnet motors.
Easy to mount a sling with it’s QD tactical sling mounts on handguard, lower receiver, and stock.
Performed well in the Field test hitting close to claimed fps and easily shooting a 1.5 inch 10 shot group for 30 feet away.
Cons:
No included sights so you will need to add your own iron, red dot or optical sight.
Battery area is a bit tight so you will need fairly compact batteries.
Comes with orange flash hider but can be swapped out.
On the high end of the price spectrum.
Comments: The Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle is not only a looker but also a performer and is one of the higher quality AEG AR Styled Airsoft Rifles out there. I know there are a ton of AR AEG Airsoft Rifles to pick from but if you want something a little bit different then the rest than the Sig Sauer ProForce MCX Virtus AEG Airsoft Rifle is for sure one to look at. It is a bit more money up front but will offer exceptional performance and the high quality internals will not only perform well but will last the test of time saving you money long term.
Starting with my velocity test, I placed 6 rounds through my Chronpgrah using .20 gram Airsoft BB’s with a fully gassed up magazine. The slowest shot was 332 fps while the fastest shot was 350 fps for a 6 shot average of 337 fps, the temperature was not overly warm in the Sea Can for this Field Test so I would imagine in a warmer shooting conditions the velocity would be a little bit higher.
Switch to my Accuracy test for the Tokyo Marui CQBR Block1 GBB Airsoft Rifle I set myself up using a rested seated shooting position with a sand bag up front for stability. My fresh paper target was 30 feet down range for this test. I was able to place 10 rounds in semi auto all within about 1.5 inches slightly high on the target but well centered left to right. This is just using out of the box already setup hop-up and sight adjustments. I then shot the remaining 25 rounds left in the magazine using several full auto bursts until the magazine was empty and as expected the grouping opened up more since this Gas Blowback Airsoft Rifle really does have some kick and does move around a fair bit.
I really enjoyed testing out the Tokyo Marui CQBR Block1 GBB Airsoft Rifle in the Replcai Airguns Sea Can Indoor Airgun Shooting Range. It performed exactly how I was hoping with mid range velocity and excellent accuracy in semi auto. If you are looking for one of the more realistic and higher quality GBB Airsoft AR-15 type Airsoft Rifles on the market you really can not go wrong with the Tokyo Marui CQBR Block1 GBB Airsoft Rifle as it checks all these boxes!
Yet another Indoor Field Test Shooting Video performed in the Replica Airguns Sea Can Airgun Shooting Range. Today I put the Sig Sauer Proforce MCX Virtus AEG Airsoft Rifle through its paces and it came out a winner for sure! I really like the way this AR15 type AEG Airsoft Rifle looks and feels and was hoping to get a good result today, I was not disappointed! I have not yet made my Table Top Video for the Sig Sauer Proforce MCX Virtus AEG Airsoft Rifle but plan for this next week, you can watch my Preview Video for some details and specifications in the mean time…
As I always do, I first tested out the Sig Sauer Proforce MCX Virtus AEG Airsoft Rifle by shooting several rounds through my Chronograph to see what the actual velocity is in fps. I used .20 gram Airsoft BB’s for this test and was able to get a 6 shot average of 408 fps so perfect for most shooting situations as this is not too hot or too cold. My slowest shot was 402 fps while the fastest shot was 410 so pretty consistent for sure.
Next I placed a fresh paper target 30 feet down range on my ammo trap and proceeded to shoot around 10 rounds into it using a rested seated shooting position with a sand bag up front to help with stability. The first shot out of the barrel felt and sounded like a double shot and this one did strike the target just a tad low so I left that one out of the test results. All the other Airsoft BB’s shot easily within 1.5 inches maybe even a bit tighter and all where well centered left to right but just a bit low on the target most likely because I was using a red dot with a riser that places the sights fairly high. Since the Sig Sauer Proforce MCX Virtus AEG Airsoft Rifle can also shoot in full auto I had to give it a try and pretty much emptied the magazine until the target actually fell off the ammo trap. The full auto grouping did open up just a slight bit as expected but only marginally.
I really like the Sig Sauer Proforce MCX Virtus AEG Airsoft Rifle, yes it’s an AR15 at it’s core but Sig has made it their own in terms of looks and styling. The performance was also excellent so this gun is not just for show. You will need a sighting system of some sort when you buy it so keep that in mind. I suggest a red dot of some sort but you could add on iron sights if you like more traditional sights.
In this Preview Unboxing Video I showcase three Pellet Guns from Beeman, one Single Stroke .177 Caliber Pellet Pistol and two Break Barrel .177 and .22 Caliber Pellet Rifles. I don’t go into a lot of details on each Airgun as I am leaving that information for my future Table Top and Field Test Videos. This video is mainly a heads up on these products with links to where you can buy them in our Online Replica Airgun Store.
In this Preview Unboxing Video I take a look at three rifles, two are Airsoft Rifles and one is an Archery Rifle. Then First Airsoft Rifle form Tokyo Marui i s full Gas Blowback all metal build AR 15 of the highest quality and realism while the second Airsoft Rifle from Sig Sauer is an AEG but again a high quality product for sure. Lastly I take a look at Umarex’s lates Airsaber which now sports dual Arrow configuration for quick follow up shots. I do plan to make future more intensive table top and shooting videos for some if not all of thees Rifles but this video will at least wet your appetite a bit.
In this Field Test Review Shooting Video I take the G&G Piranha SL GBB Airsoft Pistol through its paces to find out what we can expect in terms of velocity and accuracy. I perform two main tests, the Chronograph Test where I shoot around 5 rounds and average them out to see what the real world fps is and then I shoot 10 rounds at a paper taggert setup 30 feet downrange to see how tight of a grouping I can achieve with the G&G Piranha SL GBB Airsoft Pistol. I don’t talk much about the specifications and details in this video so if you are interested in that information you can watch my Table Top Video for this Airsoft Pistol here.
Starting first with the Chronograph Velocity Test I loaded .20 gram Airsoft BB’s into both of the supplied magazines and filled them up with propane gas. Often times because the valves may be tuned just a bit differently, you can expect each magazine to shoot a slightly different velocities or fps. This was the case with the G&G Piranha SL GBB Airsoft Pistol as the shorter double stack 25 round magazine averaged 353 fps while the longer single stack 20 round magazine shot a 328 average fps. So 25 fps difference between the two.
Moving on to the accuracy portion of the test I was able to get close to a two inch grouping fairly well centered shooting at a fresh paper target setup 30 feet away from a rested shooting position with my hands on a sand bag up front and sitting in the back. I was having some problems with the shorter double stack 25 round magazine not chambering rounds consistently which meant I had to reset my shooting position many times but even so I was able to get close to a two inch grouping. I did load up a different 25 round magazine from another Piranha Airsoft Pistol I had around and this magazine shot perfectly without any chambering problems so there must be something not exactly right with the short magazine that came with my G&G Piranha SL.
Other than the feeding issue I had for the double stack 25 round short magazine that came with my G&G Piranha SL GBB Airsoft Pistol, the Airsoft gun performed well. It for sure made for an entertaining video spraying Airsoft BB’s all over the Sea Can and trying o figure out why the Airsoft Pisotl was not working as it should. Such is life and at the end of the day it was simply something going on with the one magazine which seemed ot have a problem releasing the Airsoft BB’s into the gas chamber. All that was needed was a new magazine and we where back in business!
In this Field Test Shooting Video I test out the KJWorks CZ P-09 GBB Airsoft Pistol in the Replica Airguns Indoor Sea Can Shooting Range to find out what the velocity and accuracy is using .20 gram Airsoft BB’s. If you’re more interested in details, specifications and close up video of the KJWorks CZ P-09 GBB Airsoft Pistol then make sure to watch my Table Top Video for that information.
Starting with the velocity test I averaged out 6 rounds using my chronograph to find out the fps velocity for the KJWorks CZ P-09 GBB Airsoft Pistol and I was able to get 279.5 fps, the slowest of the 6 shots was 279 with the fastest being 281 so actually fairly closer to each other. I do mention at the end of the video that it felt like the velocity was not consistent because the blowback action to me felt like it was heavier on some shots than others? I felt like this might effect accuracy in terms of elevations if the velocity was not consistent but it ended up not being a factor as far as I could tell.
For my accuracy test I loaded 10 rounds in the KJWorks CZ P-09 GBB Airsoft Pistol and proceeded to place them to the best of my ability into my paper target setup 30 feet down range using a rested and seated shooting position (Sand bag up front, seated on a stool in the back). Even though the grouping spread out to about 4 inches, all but one round stayed within about 2 inches and side to side the spread was closer to about 1.5 inches for all shots. In terms of placement on the target they where all fairly well centered out of the box.
The fps for the KJWorks CZ P-09 GBB Airsoft Pistol is a bit low using the preinstalled short internal barrel that does not allow for the added threaded barrel extension but you could install the short internal threaded barrel and add the external barrel extension to increase the fps to more in the range of 360+. That said you would have a fairly long brass inner barrel protruding from your gun with no way I can see to install a mock suppressor to hide it so it would not look so good this way and there is also the possibility of damaging the thin exposed external barrel. Overall the KJWorks CZ P-09 GBB Airsoft Pistol performed well but I feel needs a little bit of break in time to smooth out the blowback consistency but even as is it shot consistent fps and was able to get most rounds well placed on the center of the target.
Type: Gas Blowback Airsoft Pistol. Manufacturer: KJWorks Model: CZ P-09 Materials: Metal & Polymer. Weight: 2.3 pounds (1050 grams). Length: 9 inches (229mm) total. Barrel: 4.4 inches (120mm),Metal non-rifled smooth bore. (Comes with barrel extension) Propulsion: Green gas or propane. Action: Blowback, single and double action. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 25rounds. FPS: 376 fps.
Trigger Pull: The trigger pull on the KJWorks CZ P-09 GBB Airsoft Pistol is good in both single and double action shooting modes. Most of the time you will be shooting in single action as the blowback action will do all the work cycling the slide and retracting the hammer allowing for light quick single action follow up shots. If you do decide to drop the hammer in-between shooting you can then pull the double action trigger which is much longer and a bit heavier but this will draw the hammer back and release the trigger as expected with single action shots to follow.
Accuracy: So far I have not made my Field Test Shooting Video for the KJWorks CZ P-09 GBB Airsoft Pistol but do expect it to behave much like the ASG distributed version of this same gun which by the way is also made by KJWorks. The only real difference to consider will be the gas used in both of these Airsoft guns as the ASG distributed version uses CO2 while the KJWorks version reviewed in this video uses Green Gas or Propane which will reduce the velocity a little bit. We will find out next week when I make my Field Test Shooting Video for the KJWorks CZ P-09 GBB Airsoft Pistol.
Build Quality: KJWorks is know for making high quality products and the KJWorks CZ P-09 GBB Airsoft Pistol is no different. Fit and finish is excellent and the quality of material is also very good with similar materials used as you would expect them compared to the real steel version with the exception of the metals not having to be as high grade because of way less force and pressure on the Airsoft version.
Realism: The KJWorks CZ P-09 GBB Airsoft Pistol is a one to one Replica of the real steel CZ P-09 firearm and on first inspection would be hard to tell apart. You are going to find CZ licensing throughout this Airsoft Pistol in all the right places and all the controls work just like the powder burning CZ P-09. The full blowback operation, reassessed barrel and ability to field strip it also aid in making the shooting experience super realistic.
Pros:
Build quality feels really goods, lots of weight to this Airsoft Pistol.
Full length blowback action.
Accurate licensed CZ P-09 Replica.
Trigger pull is nice in both single and double action.
Picatinny rail for adding accessories like a tac light or laser.
Double stack full size drop out Metal Magazine holds the Green Gas and 25 Airsoft BB’s
No orange tip which is always nice.
Easy to see white dot front and back sights.
Green Gas which when using propane is fairly cheap to shoot.
Easily Field Strippable.
Adjustable Hop-up.
Cons:
Sights don’t seem to be adjustable.
Controls are not fully ambidextrous.
Green Gas version has less velocity than CO2 version.
Comments:
The KJWorks CZ P-09 GBB Airsoft Pistol is really almost exactly like the ASG Distributed version since both are made by KJWorks at the end of the day. There are some slight differences between them like CO2 versus Green Gas and some other very minimal cosmetic changes. I would say go with which ever version is in stock and perhaps is less expensive at the time. You really can’t go wrong as this is a great choice to make for an Airsoft Side arm to use on the Airsoft field or for plinking in your yard or indoor range.
My Table Top Review Video of the KJWorks CZ P-09 GBB Airsoft Pistol:
Type: Gas Blowback Airsoft Pistol. Manufacturer: G&G Model: Piranha SL Materials: Metal & Polymer. Weight: 1.85 pounds (838 grams). Length: 10.3 inches (262mm) total. Barrel: 5.6 inches (142.5mm),Metal non-rifled smooth bore. Propulsion: Green gas or propane. Action: Blowback, single action only. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 20/25rounds. FPS: 370+ fps.
Trigger Pull: The trigger pull on the G&G Piranha SL GBB Airsoft Pistol is typical single action only with a super easy short take up (some of which is the trigger safety engaging), followed by a crisp predictable light release. The quick slide cycle allows for some quick semi auto shooting with the G&G Piranha SL GBB Airsoft Pistol making it a great fast action shooter with quick target acquisition.
Accuracy: I have not done my actual Field Test Shooting video review for the G&G Piranha SL GBB Airsoft Pistol but I expect it to perform similar to the G&G Piranha MK I and TR GBB Airsoft Pistol I made a Field Test Shooting Video for earlier and shoot consistently in the mid to high 300 fps with a 10 round grouping around 1-2 inches. Stay posted for my Field Test Shooting Video where I will confirm these predictions…
Build Quality: Like pretty much all G&G Airsoft guns including the Piranha series, the G&G Piranha SL GBB Airsoft Pistol build quality is really good. Fit and finish are excellent with virtually zero slide wiggle, I like the two tone stainless slide and chrome finish barrel version but the all black looks really good too. As with the entire Piranha line, the SL also has an updated Ceramic Whirl Cylinder Valve technology from G&G that should significantly help with freezing in colder or fast shooting situations along with a new Hop-up system you can easily adjust without taking the Airsoft gun apart by using the bullet shaped tool.
Realism: The G&G Piranha SL GBB Airsoft Pistol as far as I can determines not an exact replica of any specific real steel gun in production but it does share its looks and feel to that of the Glock but perhaps with an even more modernized look to it. Of course the SL version is elongates. You will find realistic function to the G&G Piranha SL GBB Airsoft Pistoling terms of it’s operation with its full blowback action, working slide catch release, magazine release trigger safety and takedown lever allowing for it to be field stripped easily.
Pros:
Good balance of metal and plastic for a balanced and light feel.
Partial slide Blowback operation should allow for even better gas performance and snappy operation.
Fiber optic sights front and back for easy target acquisition.
Has a working trigger safety.
Smaller grips perfect for people with smaller hands. Larger hands work just fine too!
Comes in a well presented soft foam form fitted box case.
New Hop-up system for quick and easy fine adjustments with no need to field strip the gun.
Long bottom rail for adding accessories.
Comes in all black and two tone black and sliver.
Comes with two magazines (20 round short and 25 round extended with fake bullets)
Comes with high quality speed loader.
Threaded barrel tip for add on mock suppressor if you want to.
Cons:
Sights are non adjustable.
Not an actual replica of any specific gun I know of but does share some Glock attributes.
Wish the extended mag held more rounds?
I like the hard shell case better that comes with the other Piranha versions.
Comments:
The G&G Piranha SL GBB Airsoft Pistol is for sure the flashiest version of the Piranha series of G&G Airsoft Pistols with its extended barrel and extended magazine with the fake bullets. I also imagine the extra barrel length will add some addition fps to the velocity and we will find out when I make my Field Test Shooting Video for it shortly. I am hoping the extended magazine holds more than an addition 5 rounds but again we are going to find out in my my Field Test Video so be sure to watch that one! If you don’t mind the additional bulk of the G&G Piranha SL GBB Airsoft Pistol over the MK 1 and TR than you will get an extra magazine and I a bit higher velocity.
My Table Top Review Video of the G&G Piranha SL GBB Airsoft Pistol:
In this Field Test Shooting Video I perform two main test in the Replica Airguns Sea Can using the KJWorks KP-16 GBB Airsoft Pistol. First a chronograph test to see what the real world velocity is and then I perform an accuracy test to see how accurate the KJWorks KP-16 GBB Airsoft Pistol is at 30 feet from the target. If you’re interested more in specifications and details along with close up video of the KJWorks KP-16 GBB Airsoft Pistol then check out my Table Top Video Review for it where I show you around and do a field strip on camera.
Starting off with my chronograph velocity test. I decided to find out what the differences would be using the included internal short barrel and the extended external barrel since the KJWorks KP-16 GBB Airsoft Pistol does come with both in the box to allow for higher fps and easier import into Canada. The KJWorks KP-16 GBB Airsoft Pistol is rated for 360+ fps using the extended longer barrel so I used that one first to establish a baseline and was able to achieve a 394 fps 4 shot average. Switching up to the shorter internal barrel without the extension, the velocity was reduces as expected and I got an average 3 shoot velocity of 301 fps. So I can safely say that the barrel extension added an additional 90+ fps to the velocity in this case!
Next I placed a brand new paper target 30 feet down range and shot ten 20 gram Airsoft BB’s into it using a seated shooting position with my hands resting on a sand bag up front, this allows for a fairly stable platform to shoot from but is not without some human error to factor in. I also decided to use the barrel extension for this test as the threading on the end of the internal barrel can disrupt airflow causing air turbulence a bit and effect accuracy. I was able to get around a 2 inch grouping with my 10 rounds. The KP-16 GBB Airsoft Pistol shot a bit low and to the left out fo the box, adjusting the hop-up should correct the elevation but in terms of windage there is not sight adjustment other than perhaps playing around with the front removable sight and trying to movie it a bit to the left so as to make it shoot more to the right.
My take on the KJWorks KP-16 GBB Airsoft Pistol is it is a solid Airsoft Shooter with great modern 1911 tactical looks. The white dot sights make it a lot easier for my older eyes to line up on the target which makes this more practical for me. I also like the higher capacity magazine which again makes this a decent side arm for Airsoft wars. If you like the look of the 1911 but want it in a bit more of a modern configuration then the KJWorks KP-16 GBB Airsoft Pistol may just be the way to go!
In this Field Test Shooting Video I perform two main test using the WE 1911 GBB Airsoft Pistol. A chronograph test to see what the real world velocity is and then I perform an accuracy test to see how accurate the WE 1911 GBB Airsoft Pistol is at 30 feet away. If you are interested more in specifications and details along with close up video of the WE 1911 GBB Airsoft Pistol then check out my Table Top Video Review for it where I even do a field strip on camera.
Starting off with my chronograph velocity test. I decided to find out what the differences would be using the internal short barrel and the extended external barrel since the WE 1911 GBB Airsoft Pistol does come with both to allow for higher fps and easier import into Canada. The WE 1911 GBB Airsoft Pistol is rated for 360+ fps using the extended longer barrel so I started with that one first and was able to achieve a 383 fps 4 shot average. Switching to the shorter internal only barrel the velocity was reduces as expected and I got an average 3 shoot velocity of 300 fps. So it is safe to say that the barrel extension added an additional 80+ fps to the velocity!
Next I placed a fresh paper target 30 feet down range and shot 10 rounds into it using a seated shooting position with my hands resting on a sand bag up front, this allows for a fairly stable platform to shoot from but is not without some human factor. I also decided to use the barrel extension for this test as the threading on the end of the internal barrel can disrupt airflow causing turbulence a bit and effect accuracy. I was able to get around a 2.5 inch grouping with my 10 rounds. The WE 1911 GBB Airsoft Pistol shot fairly well on the bullseye up and down with the out of the box hop-up setting but it did shoot just slightly to the left. Since there are no sight adjustments you will have to factor this into your aim point when shooting out at farther ranges, but at around 30 feet you should not have much problem shooting a human sized target or even a pop can.
All in all the WE 1911 GBB Airsoft Pistol perfumed as expected with consistent fps and a nice 10 shot grouping on my paper target. I did find the sights a bit hard to see as my eyes are not what they use to be so black sighted pistols with whit dot sights make it a lot easier for me to line up my target. People with younger eyes will most likely not have this problem but for us a bit older guys, keep this in mind. If you’re looking for a classic 1911 A1 that performs well and looks really nice then the WE 1911 GBB Airsoft Pistol may be just the perfect fit for you!
In this Update Preview Unboxing Video I take a look at 4 newer products that just came across my table and are in our Replica Airguns Online Stores. One is a CO2 Blowback BB Pistol, one is a CO2 .43 Caliber Paintball Pistol and two are GBB Airsoft Pistols, so a rather nice selection for us to take a look at here! I will be following up this Update Preview Unboxing Video with proper Table Top and Field Test Shooting Video to find out all the details and how well they perform.
Type: GBB Airsoft Pistol. Manufacturer: KJWorks Model:KP-16 Materials: Mostly all metal build. Weight: 2.16 pounds (980 grams). Barrel: 4.5 inches, non-rifled. Length: 9.75 inches. Propulsion: Green Gas / Propane (Can also accept a CO2 Magazine) Action: Semi Auto, single action only trigger. Ammunition Type: 6mm Plastic Airsoft BB's. Ammunition Capacity: 26 round full size dropout metal magazine. FPS: 366+ with extended barrel.
Trigger Pull: The trigger pull on the KJWorks KP-16 GBB Airsoft Pistol is exactly what your would expect from a 1911 pistol which is always a good thing as 1911’s are generally short and light which makes fast action shooting super fun and easy! There is virtually no take-up in the trigger, and then a predictable nice and light release. Trigger reset is almost non existent like most 1911’s.
Accuracy: I have not yet made my Field Test Shooting Video for the KJWorks KP-16 GBB Airsoft Pistol but plan to next week so stay posted for that video. I will be testing out both the included extended barrel and internal short barrels to see what the velocity difference will be and then when it comes to accuracy I will test out the KJWorks KP-16 GBB Airsoft Pistol using the extended barrel to exclude the threading on the short barrel interfering with airflow and accuracy.
Build Quality: The KJWorks KP-16 GBB Airsoft Pistol is a really great looking pistol with its tan with black/dark accent finish. You will find it has that KJWorks solid build quality, it is virtually all metal even including the chunky grips being metal. Fit and finish is excellent, I’m not sure if there is a better made Airsoft 1911 out there?
Realism: As is with most Full Blowback Airsoft Pistols they are built to look and act the part of their real steel counterparts and the KJWorks KP-16 GBB Airsoft Pistol checks off all the boxes here! All mechanical parts work just like the real steel version and you can easily field strip the KJWorks KP-16 GBB Airsoft Pistol to swap out the internal barrel and adjust the hop-up. I like the fact that If you are not a fan of the compensator extension then you will be happy to know that KJWorks also includes a standard barrel bushing you can replace it with to shorten up the gun and make it look more traditional to a 1911.
Pros:
Full metal gun with good weight to it.
Heavy Full blowback operation.
Excellent fit and finish as always with KJWorks pistols.
High capacity full size drop out magazine that holds 26 rounds.
Versatile magazine options, also works with CO2 magazines.
Easy to see white dot sights front and back.
All working components like the real steel 1911.
Vented extended barrel compensator looks great but can be removed easily.
Comes with extended barrel for higher velocity and easier import into Canada.
Field strip-able.
Cons:
Sights are not adjustable.
Real steel grips will not fit without some modifications.
Comments: In terms of Tactical 1911’s, I would saye the KJWorks KP-16 GBB Airsoft Pistol is one of my favorites out there. I really like the tan with dark highlights and the way KJWorks decided to match up the metal grips with the compensator with what I would call a dark chrome look to them. The KJWorks KP-16 GBB Airsoft Pistol really does look like it is right out of a video game or movie but if you want to dress it down a bit you can also remove the compensator to make it look more like most other Tactical 1911’s. I guess all that’s need to do now is test the KJWorks KP-16 GBB Airsoft Pistol out in the Replica Airguns Sea Can Range and see how well it performs!
My Table Top Video of the KJWorks KP-16 GBB Airsoft Pistol:
