Materials: Mostly metal with some plastic construction.
Weight: 2.3 pounds.
Barrel: 6 inches, non-rifled.
Propulsion: 12 gram CO2.
Action: Revolver, single & double actions.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 6 rounds.
FPS: 400fps.
Trigger Pull: The trigger pull on the Umarex Smith & Wesson 327 TRR8 is good in both single and double action, I wouldn't say it isn't supper light in either action but pretty decent overall. I found shooting in single action to be the most precise as the release point is instant. Shooting in double action was also fairly predictable.
Accuracy: The results I got shooting my 6 round group from a 20 foot out position where none other than impressive and I would have to say the 327 TRR8 shot the best group (just over a 1/2 inch) I have ever recorded using 4.5mm steel BB's. I'm not even sure if I have bettered these results using pellets from a rifled barreled pistol? This goes to show you how well an accurate BB gun can perform when shooting from a reasonable distance.
Build Quality: With the Umarex S&W 327 TRR8 Revolver being mostly metal, you would expect it to have a decent build quality and I am happy to say it does. Everything looked and fit well, the CO2 Revolver had good heft to it and I had absolutely no problems shooting this gun. My only real reservation is the plastic CO2 screw tab but so far with my other guns that have the same type of tabs, they are holding up well.
Realism:The Umarex Smith & Wesson 327 TRR8 is very realistic in terms of looking and operating as a revolver with it's brass shell casings you load juts like a real revolver, so yes it feels realistic and even looks a lot like a S&W 327 TRR8 to some degree. With that said, Umarex has taken some liberty on this one most likely because it is built off an existing airgun frame and to make it into a true 327 TRR8 replica would have required a complete redesign. I would have to say the Umarex S&W M&P R8 is actually a closer 327 TRR8 Replica than the gun reviewed in this video.
It's a revolver with actual shells! Gives you the feeling of loading and shooting a real revolver.
Almost all metal design.
Lots of detail in this gun, very well made, fit and finish is excellent.
Excellent power, accuracy and shots per CO2.
Adjustable fiber optic sights.
Lots of places to mount accessories.
Cons:
Plastic CO2 screw tab could cause problems down the road?
Only shoots BB's - why not make a pellet version with a rifled barrel?
Actually shoots 6 rounds not 8 like the real version of this revolver.
Comments:
What's not to like about this Umarex Smith & Wesson Revolver? It's built very well, it most certainly looks good, it has the best tested accuracy I have seen so far from a BB gun, it shot even higher velocities than claimed, it gets tons of shots from a single CO2, and it loads up just like a real steel revolver but at a fraction of the cost to shoot! If you want to customize yours you have plenty of options with two weaver mounts top and bottom and it comes in at a very reasonable price tag!
The bad news is we ran out of one of our most popular air pistols, the Cybergun Tanfoglio Witness 1911, but the good news is you can preorder one right now and save $20! We have an expected arrival date of mid July but this is not written in stone as there are things we juts have no control over in this crazy world we live in... What I can tell you is that if you don't order now and wait for them when they come in, we might already be sold out and if you do get one you will pay $20 more than you needed to!
If you live in the US we are also expecting stock to arrive right around mid July so hang on and yes you can now preorder one also...
I've had a lot of requests to review the Umarex Smith & Wesson 327 TRR8 and the Umarex Beretta 90two BB CO2 Pistols, perhaps not as many requests for the Umarex Browning Buck Mark URX but the URX has been one I have wanted to get my hands on as I am an owner of a 22LR Browning Buck Mark pistol.
Umarex came through and sent all three of these pistols to me this week for review so now we all get to benefit, I get three new guns added to my collection and my viewers get some new Umarex Product Reviews from me!
I will of course be doing full review of all three Umarex pistols, in this videos I just quickly show you around them all.
In short, The Umarex Smith & Wesson 327 TRR8 is very similar to my Dan Wesson Revolvers in most every way but with the Smith & Wesson branding and licensing and a slightly different barrel design. The Umarex Beretta 90two is what I would consider an upgraded Beretta Elite II complete with a working metal slide, full size drop out magazine that holds both the CO2 and 4.5mm BB's and a single and double action trigger.
The Umarex Browning Buck Mark URX is the sleeper of them all in my opinion, even though it is a single shot .177 pellet pistol with fps on the lower side, it is really a joy to shoot with its supper easy to cock break barrel and well balanced grip. Right out of the box I was getting excellent shot placement with it!
Make sure to watch this short Preview video and stay posted for the full review to come out shortly:
I have been hinting about an even bigger Canada sale on the King Arms Colt M4A1 Metal AEG Airsoft Rifle and here it is - now $100 OFF the regular price (Canada Store Only) so don't wait as I'm not sure how long this sale will last...
Trigger Pull: The trigger pull on the ASG AW .308 Sniper Rifle is very nice, there is very little play, once the trigger safety is flush the release is almost instant and the pull is very light but not so light that you would accidentally shoot it.
Accuracy: Being an Airsoft Rifle and a Sniper rifle in one made me wonder if you could actually get a tight grouping at longer distances? I'm sure hitting a human target at 60 feet shouldn't be too hard but what about a pop can consistently? With a bit of fine tuning I was able to get a 2 inch grouping at 60 feet out using a rested position. And with the Hop-up dialed in, my aim point was the same at 30 feet as it was at 60 feet as a result of the backspin keeping the trajectory even all the way out.
Build Quality:The ASG AW .308 is not over the top price wise so I was not expecting it to be built like a Sherman tank. It is however solid enough but also light enough to use in the field without having to lug around too much extra weight. Most of the parts that you want to be metal are metal including the barrel, bolt & receiver, trigger, magazine, strap rings and rial system. The stock is of course plastic with some added rubber and seems to be hollow in parts which I am assuming is what keeps this rifle on the lean side.
Realism: Without actually having handled a real AW .308 Accuracy International England Sniper Rifle, it's hard to say how spot on it is but it does look very similar to the photos I found online with the exception of the magazine being further forward on the stock. It is a nice touch that the actual Accuracy International England licensing is also on the ASG AW .308.
Extremely fun to shoot (Even though it's not a semi or full auto gun).
No CO2 or batteries required, ready when you are.
Excellent accuracy at most ranges.
Very nice trigger.
Good power.
Good use of metal parts.
Will not break the bank.
Cons:
Does not come with a sighting system so you need to buy something to shoot it.
Light Airsoft BB's will not give you good results, use high end heavy Airsoft BB's for best results.
Stock looks adjustable but is not, was not a problem, everything felt good!
Some things are not explained in the manual?
Comments:
I thoroughly enjoyed reviewing this Airsoft rifle, you would think that a full auto gun would be so much more fun to shoot and don't get me wrong they are fun to shoot, but there is something to be said about setting up a target well down range, getting into position to take the shot and slowly squeezing off one well placed round! And of course hitting the target. I really like the fact that all you need is a bunch of Airsoft BB's and you're ready to go, no CO2, no dead batteries to deal with. Every time a do another Airsoft review I am impressed with how well these guns shoot and how accurate they are! The ASG AW .308 took this to an even higher level and also showed me that an Airsoft BB can pack some real punch to it. All in all it was a good day and I have a feeling when I get the urge to fire off some well placed rounds just for fun, this rifle is going to get picked more often than not.
I just received some of my ASG Airsoft guns in my BC location and wanted to make an update video for you so you can see them up close and perhaps see how they stack up against their Airgun counterparts. Keep in mind many of my ASG guns are only available in the Canada Replica Airguns Store, we do have some ASG Airsoft guns for my US based customers but this time here in Canada I have more to offer my Canadian folks!
I am also super impressed with the high quality of the LMT Defender M4 Carbines, they are a serious bit of gear and have some very good heft to them, even more so than my full metal King Arms M4A1 I already sell and have done a full review of, not to take anything away from the Kings Arms product as it is very good at its price point.
I also received my first sniper rifle and have played around with it a bit to see what it is capable of. I added a bipod to the front and a 3x9 power scope as the ASG AW .308 comes pretty bare bones but ready for all you can throw at it. I can say it likes heavier Airsoft BB's, as the .20 gram ones I started with seemed to fly off in all directions due to the high velocity, even stepping up to a .25 gram BB tightened my group up significantly at 30 feet. I have heard this rifle really prefers heavy Airsoft BB's so I plan do do my review based on that information.
Enjoy my Vimeo Video Update focusing on the new ASG Airsoft lineup.
Trigger Pull: The trigger pull on the Daisy Powerline 5501 is about average, a bit long but fairly smooth and about a medium pull weight. The first part of the action loads a BB into the chamber and the second part releases the hammer which give the pistol a bit of a creepy first stage.
Accuracy: I was not impressed with how my Daisy 5501 performed in the accuracy portion of this review, it got about a 3 inch 8 shot group from 20 feet out in a semi rested position, in comparison many of my BB pistols can easily get a 1 inch grouping shooting this way. I may try a different brand of BB's even though the RWS BB's I used where of high quality, they just may have not suited this pistol? FPS velocities where a bit under the manufacturers claimed ratings but very close at a respectable average of 386 fps with my 8 shot test shooting on a somewhat cold day. Not bad for a blowback pistol!
Build Quality: The Daisy Powerline 5501 is a pretty much all metal pistol with what looks to be very good build quality. The 5501 is made in Japan, I have found most Japanese made guns to be well made in the past. The frame, slide, trigger, safety, slide catch, CO2 screw, and de-cocker are all metal and of course many of the internal parts too. The only plastic parts to speak of are the grips and the magazine. I would have liked to have seen the magazine with more metal in it but for the most part it is protected within the gun so you should be OK.
Realism:The Daisy Powerline 5501 is loosely styled after the Sig Sauer in combination with a Walther semi auto pistol. It is lacking a cut-out ejection port that would have added greatly to its realism. I would have also liked to have seen a metal magazine as it's seems a bit cheap compared to the rest of the pistol. I do like the fact that the barrel tip has a large diameter opening making the gun look more like the larger caliber weapon it is styled after. It's also one of the few BB pistols with a working de-coker on it.
The two-tone look is very nice with a stainless look to the frame.
Accessory rail makes adding a tactical light or laser easy.
Warning instructions on slide are color matched to be more discreet.
Very well designed CO2 tightening system and also well hidden.
Cons:
Did not shoot very accurately for me with the BB's I used.
Ejection port is not cut out, takes away from the realism a bit.
All plastic magazine.
No white dotes on rear sight.
Comments:
All in all I liked this Daisy Powerline 5501, other than the poor results I got in terms of accuracy using my chosen zinc platted RWS BB's, the Powerline 5501 was really very good in all other aspects. I think it is a rather nice looking gun with excellent build quality throughout with lots of metal giving the 5001 a nice 1.5 pounds weight. The Daisy 5501 had very heavy and snappy blowback while retaining decent shots per CO2 and respectable close to 400 fps real world velocities. This Daisy Powerline 5501 blowback BB pistol is priced at well under $100 making it very good value in my mind.
My Vimeo Video Comparison Review for the Daisy Powerline BB Pistol:
The STI Duty One 1911 Non-Blowback Airsoft Pistol is a full size replica of the actual STI Duty one 1911 pistol which is a modernized and upgraded version of the original classic Colt 1911. You will find features like; an integrated weaver rail for lasers and tactical lights, high rise beavertail grips, a unique serial number on each air pistol and STI licensed markings. (BUY NOW)
The ASG AW .308 very powerful spring operated Airsoft Sniper Rifle and has licensed Accuracy International AW .308 markings. Out of the box it shoots close to 2 joule and weights almost 7 pounds with its solid metal construction. The Sportline AW .308 has adjustable Hop-Up for accuracy and top rail for mounting a scope. (BUY NOW)
The ASG LMT Defender R.I.S. is a classic carbine with a few modifications. The normal front guard has been replaced with a full rail interface system (R.I.S.), that gives you plenty of opportunities to mount accessories. As the normal battery space is used by the R.I.S. the wiring to the battery goes back to the stock. The stock is a special sopmod stock with two compartments to house the battery. The functionality is similar to the other LMT ProLine models – Adjustable hop up, 1.5 joule power and semi & full auto. (BUY NOW)
The Proline (PL) range of products, are high-end products, targeted at regular players, players who want to have better than average Airsoft gun and Milsim/teamplayers. The Proline models can be modified and upgraded.
Two well known firearms and accessory manufactures have joined forces to create this beauty of a Proline Airsoft AEG. The full metal Defender4 Carbine licensed by LMT upgraded with the S.I.R. rail system licensed by A.R.M.S.. A Selective Integrated Rail system (S.I.R.) offers a wide variety of options to mount tactical accessories. Quick and handy flip-up iron sights are mounted on the S.I.R. Strong and well built with what is probably one of the best out-of-the-box gearboxes, heavy reinforced with 8 and 9 mm bearings, steel gears, and ball-bearing spring-guide as well as an upgraded cylinder set. It can handle Li-Po batteries and shoots 1.5 joule (120m/s/394 fps) in semi- and full-auto mode with Easily adjustable Hop-Up. (BUY NOW)
The Proline (PL) range of products, are high-end products, targeted at regular players, players who want to have better than average Airsoft gun and Milsim/teamplayers. The Proline models can be modified and upgraded.
As promised, the new ASG Airsoft Pistols have been added to the Replica Airguns Store and by the way none of them have the orange tip as they are all classified as Uncontrolled Firearms just like a standard Airgun!
Dan Wesson Airsoft Revolvers:
The legendary revolvers licensed by Dan Wesson These revolvers have authentic markings and an individual serial number stamped into the frame. The revolvers features a single and double action trigger system and adjustable rear sight for extra realism and accuracy. The Dan Wesson BB revolvers are made of metal except for the ergonomical grip constructed in hard ABS plastic.
The 12g CO2 cartridge is stored under the grip and is easily accessed by sliding the grip to the side – easy-load style. Each of the 6 cartridges holds one Airsoft BB and is placed in the metal drum that rotates as each round is fired. The revolvers comes with a speed loader, changeable tactical rail and 6 cartridges.
The CZ 75 P-07 DUTY is the new generation of the CZ 75 family which was first designed back in 1975 by the famous small arms manufacturer Česká zbrojovka, Czech Republic. This is the semi automatic 4.5mm airgun version fully licensed by CZ. It is powered by a 12g CO2 cartridge stored in the grip using the easy-load system and the Airsoft BB’s are put in the drop-out magazine.
The CZ 75 P-07 DUTY is a compact tactical upgraded version compared to the standard CZ 75. Besides being more compact in size the P-07 DUTY has an integrated front waiver rail for mounting light and laser. The grip and metal slide carries authentic CZ markings and every gun comes with unique serial number.
The ASG Steyr M9-A1 Non-Blowback CO2 6mm AIrsoft BB pistol is a faithful copy of the real model Steyr mannlicher M9-A1 complete with licensed trade marks and a functional safety pin. You will get over 465fps shots from the 14 round drop out magazine and just like the real steal you can add a laser site or tactical light to the weaver style accessory rail.
Just a quick heads up for our Canadian customers waiting on Dan Wesson Revolvers, the ASG Airguns and some Airsoft guns have now cleared customs, we still have some more Airsoft guns from ASG coming down the road but at least we have some to start with for now.
PLEASE KEEP IN MIND that we have a very large backorder list and we will be doing our best to send out the backordered Dan Wesson starting tomorrow. It will take some time to get caught up so please try to avoid sending us an email about your backordered Dan Wesson, we are working very hard to get them to all of you and will update everyone with a tracking number as soon as yours ships.
If you are interested in some of the ASG Airsoft guns then make sure to check back over the next few days as I update our Airsoft guns section or our Canada Replica Airguns Store with the new ASG Airsoft items.
We have been waiting a while here in Canada for some of our ASG products to come back in stock. ASG provides us with our Dan Wesson line and the Dan Wesson Revolvers have been a very popular airgun to say the least. We did manage to get a few of them, mainly to fill some of the earlier back orders but this big order had to come by cargo ship and now it has arrived and has been with Canada customs for about a week so we should be close to having them for you!
The hold up on this shipment is because we have some ASG Airsoft guns in with the regular Airguns which is good news as we will soon be stocking some very nice ASG Airsoft Pistols and Rifles but the new Airsoft guns are the main reason that Canada Customs is taking their time giving their OK on this shipment.
My advice to anyone who has been waiting a long time for their Dan Wesson Revolver (Mostly the 2.5 & 4 inch versions) is to hold on a bit longer because the wait is almost over and we will sell out of these guns quickly so having your backorder in guarantees you will get yours.
Trigger Pull: The trigger pull on the Crosman M4-177 is medium length and fairly light. The trigger mainly releases the bolt so no pre-cocking is required. It takes a bit to get used to where the release point since there are no real warning indicators. The trigger is plastic but seems to work just fine as there is no real load on the trigger when shooting.
Accuracy: I found the Crosman M4-177 Air Rifle to be a very good shooter, getting about a 3/4 inch grouping from 30 feet out in a semi rested position (sand bag up front, standing in the back). I also put 3 rounds through my Chrony Chronograph and the M4-177 averaged about 410 fps with the 10 pump maximum which is about what I would expect from the Canadian detuned version, keep in mind the US non-detuned version shoots up in the 600 fps range so it would have been nice if the Canadian version got closer to our legal non-registered limit of 500 fps.
Build Quality:The Crosman M4-177 Multi-pump Air Rifle is mostly plastic which some of my viewers will not like, but for a sub $100 Replica Air Rifle it hits the mark in terms of affordability and if it was an all metal airgun you would more than likely expect to double the price tag - if not more! Even though plastic is used throughout the Air Rifle, there are some internal metal parts where they need to be, the fit and finish is very good and I do not get the feeling that the Crosman M4-177 is cheaply made in any way.
Realism: The Crosman M4-177 is a respectable M4/AR replica. It is not exact in terms of true dimensions as the forward stock is a bit long to accommodate the pumping mechanism, (kind of long like the original AR but without the tapering). Crosman did a good job to add all the parts that you would find on a real M4/AR even if they are simply for show and are molded into the plastic. I particularly like the removable iron sights and full rail for mounting a scope or red dot sight. I am also really glad to see a Replica Assault rifle on the market as so few of them are available in pellet or steel BB shooters.
One of the few replica Air Rifles on the market (MP5K PDW & Mini UZI).
Very well priced.
Excellent accuracy!
Comes with detachable and adjustable iron sights.
Fully adjustable stock.
Picatinny rail on top for just about any type of sight system.
Option of shooting pellets or BB's.
Cons:
Mostly plastic build.
Lower rails you just can not use as the pumping action gets in the way?
FPS is well below the Canada non PAL limit of 500 fps so maybe a bit too detuned?
Comments:
The Crosman M4-177 Multi-Pump Pellet/BB Air Rifle is in my opinion a must have air rifle, simply because... why not? How many replica pellet and steel BB shooting air rifles are there out there and for under $100 to boot? What the M4-177 lacks in metal parts, it makes up in accuracy and fun factor. And the M4-177 really is not a bad replica in terms of realism as Crosman made it a point to copy the real steel M4/AR fairly closely. I know for a fact from the emails I received and YouTube comments that many people have been looking for an M4/AR styled Air Rifle and Crosman has now delivered one to us so what are you waiting for ;)
It's always good to start the week off with an update video so everyone knows what's happening short-term and long-term...
I recently acquired a couple new items that I will be reviewing in the near future (along with several other reviews that I will be trying to get to ASAP!) First off is the Crosman M4-177 which is basically a multi-pump pellet and BB shooting replica of an AR or M4 styled carbine used by the US military. The Crosman M4-177 is mostly plastic on the outside but on first inspection seems to be built fairly well. It has removable metal sights and the magazine is also detachable but is not used as a magazine but rather a compartment for storage. The unit I have is the Canadian detuned version which shoots .177 caliber lead pellets and 4.5mm steel BB's at under 500 fps.
I also received my first old west blank shooting revolver (M1873), I have wanted one of these for a while and finally got my hands on one :) Unfortunately this one has a plugged barrel so it vents out of the cylinder area which may get a bit messy. I may see about making this one a front venting gun if possible and of course as long as it's within the law as I plan to make sure the cylinder stays semi plugged so no actual rounds could ever be shot out of it. The Old West M1873 Blank Revolver holds six .380 crimped blanks and is an all metal and wood construction. This should be a fun review!
I also touch upon a few other guns on the list of items I need to review and by the way in an attempt to get caught up I will be doing my Table Top and Shooting reviews combined.
Here are some of the guns that I will be reviewing over the next while...
Gamo P-25 & PT-85 .177 Caliber Blowback Pellet pistols (This one will get done this week!)
Materials: Plastic (polymer) and some metal construction.
Weight: .92 pounds.
Barrel: 4.5 inches, metal smooth bore.
Propulsion: 12 gram CO2 x 1.
Action: Semi auto, single and double action.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 18 shot full size drop out magazine.
FPS: 410.
Trigger Pull: The trigger pull on the Umarex Browning Hi-power Mark III is not too bad but has more resistance when the BB magazine is full as the first part of the trigger pull is dedicated to advancing a BB into the BB chamber, this is true in both single and double action. Shooting the Browning Hi-power in single action mode is a bit smoother but also has some resistance right at the beginning. Overall I would say it has a medium pull and as you can see in my shooting results the trigger did not effect the accuracy negatively at all!
Accuracy: Excellent for a BB shooter I shot a 1 inch 7 shot group from 20 feet out in a semi-rested position and this is was with open sights! I also shot freehand in double action, shooting quickly and also got a very respectable 2.5 inch pattern that represented an additional 36 shots. When it came to FPS performance the Umarex Browning Hi-power Mark III was a bit lower than claimed which is not unusual with most airguns (369 fps averaged 8 shots). The Umarex Browning Hi-power did get well over 100 shots per CO2 but I would have given up a few shots for a bit more power.
Build Quality: I would have liked to have seen this air pistol replica use a lot more metal and perhaps some more working parts. As is it is mostly plastic and very light weight but the fit and finish are good overall and the gun should work just fine and hold up over time.
Realism: The Umarex Browning Hi-power Mark III is a licensed replica of the actual Browning Hi-power Mark III semi auto pistol. It is a very close "looking" copy in almost every way. I like the fact that there are no side screw holes that you find in many plastic moulded BB pistols and the Browning Mark III has a working ambidextrous safety and magazine release just like the real Browning Hi-power Mark III. The let down here is in the .92 pound weight of the Browning BB version, it just doesn't have that "gun like" weight to it which makes it feel a bit cheap. I would have really liked to see this BB pistol in all metal and with a working slide, and I would not have minded to pay extra for the upgrade in materials.
Mostly plastic which makes the gun feel kind of light weight.
No working slide.
Could have just a bit more power even at the expense of less shots per CO2.
No white dots on the sights?
Comments:
The Umarex Browning Hi-power Mark III BB CO2 pistol is a very good replica of the real steel version of this gun and in terms of "looks" alone does a good job making this pistol very believable. Now once you pick it up, you know it's not the real deal because of the plastic build and much lower weight. So with that out of the way, let's talk a bit more about what I did really like about the Browning Hi-power Mark III! I liked the excellent accuracy, easy to load and use full size drop out metal magazine not often found in a low price airgun like this, and I also like the fact that there are no screw holes on the side of this gun found in so many plastic and even some metal BB guns. So overall the Browning Hi-power Mark III is a good overall replica, has excellent accuracy and is really the only Browning Hi-power available in an airgun that I know about.
My Vimeo Table Top & Shooting Review for the Browning Hi-power Mark III BB CO2 Pistol:
I wanted to make a quick video to showcase a few items I will be reviewing and some of which are also for sale in the Replica Airguns Store.
First off we have a few of the new front firing Kimar Model 85's (Orange Slide) left in Canada. I stated out with 9 and I am not down to 3 so hurry on this one if you want one in Canada. If you are in the US, I also have them for sale in my US Replica Airguns Store in both Black and Nickel.
Next up I just wanted to show you a Kimar Lady K that will show up some time down the road in a video review, this item is now in my personal collection and sorry it is not for sale in either my Canada or US store at this time.
I have had lots of requests to review the Daisy Powerline 5501 and to be honest I have wanted to get this one for some time and even though it is available for sale in our US Replica Airguns Store I have not had the opportunity to pick one up until now so look forward to that review again some time down the road...
Last but not least I wanted to give you a closer look at the new Turkish made high powered Webley Tempest I have available in the Canada Store, these ones shoot as hard as legally possible within our Canada limitation to be classified as uncontrolled firearms and they make great compact pest control pistols that you can keep handy for when required.
OK, so that's it for now and be sure to watch the full reviews of these guns when I get to them shortly!
We where out of the Umarex Steel Storm for a while, I had a lot of people asking about this one so I thought I would let everyone know we now have the Umarex Steel Storm back in stock and for sale again in the Canada Replica Airguns Store.
Canada Customers only - Act fast on this one, I am selling the Cybergun Sig Sauer P226 X-Five Sight Rail Version at $30 off the regular price, this is for the first five customers that buy it! I am also throwing in five CO2 cartridges for free!
Keep in mind the sight rail version comes with a compensator, sight rail and adjustable rear sight and it's selling for less than the standard version right now!
Here is a bit of a heads up for some future reviews and YouTube videos. I have had a lot of requests to review the Gamo PT-85 and Gamo P-25 so I went ahead and picked up one of each. Now I do not currently sell these blowback air pistols in the Replica Airguns Canada Store but I do have them available in our US Replica Airguns Store.
I also took in an EKOL Lady in Chrome finish from a customer of mine looking to purchase another item in the Replica Airguns Store. Since I don't have this model it will get added to my personal collection of replica guns :) Either way we all benefit because now I have a new blank gun I can review for you all!
The fully licensed Cybergun Jericho 941 has been out of stock for almost half a year and now we have it again! Don't let this one slip through your fingers again. It's a really nice airgun for the money, well made with a full size drop out metal magazine and metal slide!
