After what seemed like forever, we now have some more Cybergun Sig Sauer P226 X-Five's back in stock. And I am talking about the non-open or non-sight rail version, we never did run out of the sight rail version...
So if you have been waiting you can pick one up Right Now!
Type: Airsoft.
Manufacturer:King Arms.
Model:Colt M4A1 Metal AEG.
Materials: Metal & Nylon.
Weight: 6 pounds.
Barrel: 15 inches, metal.
Propulsion: AEG
Action: Semi/full auto, single action.
Ammunition Type: 6mm Plastic BB (recommended .20 gram plus).
Ammunition Capacity: 300+ round magazine.
FPS: 450.
If you haven't already checked out my King Arms Colt M4A1 Table Top Review, make sure to do so for all the details and specifications on the King Arms Colt M4A1 Airsoft AEG Carbine.
This Field Test Review focusses primarily on how the AEG M4A1 performs in feet per second velocity using .25 gram plastic Airsoft BB's, its accuracy in both semi and full auto and of course my comments on it's shoot-ability and overall performance.
For this field test review of my King Arms M4A1 Airsoft rifle I switched from the .20 gram Airsoft BB's to heavier .25 gram plastic BB's. I did this to have a comparison between the two weights since I had already Chronographed and accuracy tested the .20 gram BB's. As expected the fps dropped a bit, down to around 380 fps but still stayed very consistent for me as would be expected with an AEG styled rifle.
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
Another reason I wanted to test out the heavier .25 gram Airsoft BB's is because generally speaking, heavier BB's will shoot a bit more accurately as they are not as effected by the higher fps this guns is capable of shooing. The .20 gram BB's actually did well so I had high expectation for the .25 gram BB's and I was not disappointed! For this test I shot the King Arms Colt M4A1 from 30 feet out in a semi rested position (rested on a sand bag in the front and standing in the back). I shot 10 rounds in semi auto and got a very respectable 1.5 inch group which rivals any airgun in my collection! I also shot in full auto (I can't really tell you how many rounds ;) and the King Arms Colt M4A1 punched a nice 2 inch hole in the target. I would almost say it even beat out my other full auto 4.5mm steel BB shooting guns in terms of how tight of a group it can shoot while in full auto mode.
I am sure the Airsoft Hop-up system has something to do with the accuracy as the back-rotating BB's should keep a truer trajectory. One thing I notice while shooting this AEG styled Airsoft rifle, is that there is a slight delay from the time you pull the trigger till the shot is released. The trigger is actually activating a motor which in turn pulls the internal spring back, which then releases it once it hits the end of it's cycle. It's not a long delay but it is noticeable. In full auto it really does not matter at all :)
All in all I am again impressed with what an Airsoft gun can do in terms of both looks and performance.
My Vimeo Field Test Review for the King Arms Colt M4A1 6mm AEG Airsoft Carbine:
I received another airgun from Umarex USA, this time it was the Browning Hi-Power Mark III in a 4.5mm CO2 BB Pistol. (Thanks for sending it Umarex!) I did have to cross the boarder and bring it back which always adds to the excitement because you never know what to expect and how educated the CBSA guard will be? It did go pretty smoothly this instance so I had some time to make this short Preview video for you.
Here is some of the basic info about the Umarex Hi-Power Mark III CO2 BB Pistol and by the way it is available in our US Replica Airguns Store, sorry my Canadian customers will have to wait a bit...
If you're a Browning collector, this gun belongs in your vault. The Browning Hi-Power is such a sought-after firearm, so it's about time someone made an airgun replica! This lightweight pistol shoots 4.5mm steel BB's and will deliver hours of shooting fun for only pennies per shot. Since it's a copy of the real steel firearm, you can use this air gun just about anywhere to maintain firearm proficiency without the exorbitant ammo costs or range fees.
4.5mm Steel BB
12 gram CO2 powered
18 round full size drop out magazine
410 fps
.75 pounds
4.75 inch steel smooth Bore barrel
Single & double action
Browning licensed!
Type: BB air pistol.
Manufacturer: Swiss Arms.
Model: Sig Sauer GSR 1911.
Materials: Mostly plastic construction with a few metal parts.
Weight: 1.3 pound.
Barrel: 4.5 inches, metal non-rifled.
Propulsion: CO2 x 1.
Action: Semi auto, double action.
Ammunition Type: 4.5mm BB's.
Ammunition Capacity: 20 round magazine.
FPS: 398 claimed - 450 real world.
Trigger Pull: The Swiss Arms Sig Sauer GSR 1911 has a double action trigger with about a medium weight pull to it. It does feel somewhat long as the break point seems to take a while to get to but once you master where it is, you can shoot this BB gun with surprising accuracy.
Accuracy: Once I sorted out the laser sight which took some MacGyvering (as explained in the video), this gun shot a nice tight pattern! For my quick test I shot free standing from 20 feet away and put 8 rounds into my target taking my time. I got about a 1.5 inch group which was very good and another note worth mentioning would be the Chronograph results I got, even though the Sig Sauer GSR 1911 CO2 BB pistol has a claimed fps of 398, mine came in consistently right around 450 fps!
Build Quality: The Swiss Arms GSR 1911 is mostly plastic and has very few actual moving parts, I'm personally not too worried about it, in fact the lack of moving parts means there is less to go wrong with it! I found the fit and finish to be good overall and as long as you are OK with the plastic this gun should be just fine for you. The only thing that would have been nice to see improved would be the laser and how it is adjusted. As is out of the box without modification, you will find that it easily moves out of aim. (I do explain how I fixed this problem in my video review)
Realism: The Swiss Arms Sig Sauer GSR 1911 in terms of size and looks, is about what the real gun would look like, with the exception of the trigger which is kind of a strange looking combination of triggers mashed into one. Of course being a moulded plastic airgun, it is much lighter then the real steel 1911 and has the telltale screw holes on the right hand side. The magazine ejector does work but the real steel safety, slide catch/release, hammer and grip safety are all moulded into the plastic so they do not function. On a good note the barrel muzzle is large like a real 45 caliber adding to the realism.
Purchased this gun from: The Replica Airguns Store.
Pros:
Cons:
Comments:
The Swiss Arms Sig Sauer GSR 1911 is pretty much what you would expect from a low cost airgun in terms of build quality, lots of plastic, with less working parts. This does not take away from the performance however as the GSR 1911 performed well in both accuracy and power. It also comes with the laser sight, safety glasses and starter BB's as an added bonus for about the same price as many entry level airguns on their own. If you like ultra realistic guns then this is on may not be for you, but if you want a good performer with the replica look and combined with a value package then I think you will be more than happy with the Swiss Arms Sig Sauer GSR 1911.
My YouTube Video Review for the Swiss Arms Sig Sauer GSR 1911 CO2 Air Pistol:
Type: Airsoft.
Manufacturer:Western Arms (WA).
Model:Shorty 40.
Materials: Polymer & Metal.
Weight: 1.7 pounds.
Barrel: 3 inches, metal.
Propulsion: GBB
Action: Semi auto, single & double action.
Ammunition Type: 6mm plastic BB (recommended .20 gram).
Ammunition Capacity: 20 round magazine.
FPS: 260-270.
Trigger Pull: The trigger pull on the Western Arms Smith & Wesson Shorty 40 is very light in both single and double action but of course the lightest when shooting in single action mode. The single action is short with next to no reset making for very quick followup shots. If you have de-cocked the gun using the de-cocker, you may find it hard to re-cock again as there is no exposed hammer to grab. You will need to pull the trigger just a bit to expose the hammer and then pull it back the rest of the way as per normal.
Accuracy: This is now the third Airsoft gun I have tested and I always assumed Airsoft guns would not be nearly as accurate as my metal BB shooters but again I have been proven wrong! The WA S&W Shorty 40 even with its short 3 inch barrel got a nice 2 inch group my first time testing it out from 20 feet out in a free standing position. And 4 shots got right in the bullseye! Considering this Airsoft gun was supposed to be non-working, it worked pretty good for me!
Build Quality: When you first pickup the Western Arms Smith & Wesson Shorty .40, you immediately think it is an all metal gun since it's all black and has really good weight to it sitting in at 1.7 pounds and in a very small package. On close up inspection the WA Shorty 40 has a lot of plastic in it including the slide and the frame. Polymer frames are not uncommon and to be honest if the gun looks and feels like metal but is actually plastic, there are some benefits. This review model being used has seen some action but it looks pretty much like a brand new gun, the reason being is because of the plastic exterior - in general, plastic is not painted but rather the color is throughout the material so it will not rub off or show a scratch nearly as much as a painted or blued finishe which will show the grey metal underneath. And to be fair, my Western Arms Shorty 40 has lots of high quality metal parts where they really need to be like the magazine, magazine release, slide catch, trigger, hammer, barrel and many other internal parts.
Realism: From looking at photos of the real Smith & Wesson Shorty 40, I can say the Airsoft version is a dead ringer. The Western Arms version has all the markings and and licensing in all the right places and from what I can tell without actually having used the real steel version, it seems to function and even field strip like the real .40 caliber model. The only real telltale sign are the plastic parts but as I said before it is very hard to tell because of this Airsoft guns heavy weight.
Purchased From: Used.
Pros:
I got this one as a bargain ($50) to say the least.
Very realistic replica with full licensing.
Seems to be very accurate for a short barreled Airsoft pistol.
Decent FPS for a compact GBB Airsoft gun.
Even thought the frame and slide are polymer, it has very good weight and feel to it.
Everything works like the original, field strips and most mechanical parts are metal.
Safety also works as the de-cocker.
Adjustable rear sight for windage.
Very nice light single and double action trigger.
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
Cons:
Hard to find this one, not in production as far as I know?
Plastic slide and frame but still very high quality.
Seems to go through gas fast - 20 BB's and it's done!
Comments:
For those of you who have been a bit down on the Airsoft guns I have been reviewing, maybe you just haven't put your hands on the right ones so far? I am now on my third Airsoft product review and I have received all kinds of comments from people ranging from very positive to very negative, with some people comparing Airsoft guns to kids toys. The funny thing is it's all about perspective - people who only shoot powder burners will say an Airgun is a toy but again many powder burner shooters also shoot airguns for economical and practical reasons. I think we should respect peoples interest and if it's not for you then stick with what is for you but at least first give it a chance. I plan to take part in some Airsoft games so this is a great time for me to see what Airsoft guns I like and will work well once I get in a battle situation. Now getting back to the Western Arms Smith & Wesson Shorty 40 at hand... It is a pleasure to shoot and for a "Broken" gun it sure works well, I wonder what a new pristine condition one would shoot like? It's hard for me to tell you to go out and buy one since they are not readily available but if you do manage to come across one, grab it if you can!
My Vimeo Video Review for the Western Arms Smith & Wesson Shorty 40 Airsoft Pistol:
Type: Airsoft.
Manufacturer:King Arms.
Model: Colt M4A1 Metal AEG.
Materials: Metal & Nylon.
Weight: 6 pounds.
Barrel: 15 inches, metal.
Propulsion: AEG
Action: Semi/full auto, single action.
Ammunition Type: 6mm Plastic BB (recommended .20 gram plus).
Ammunition Capacity: 300+ round magazine.
FPS: 450.
Trigger Pull: The trigger pull on the King Arms Colt M4A1 is fairly short and light as it is essentially just an on off switch for the internal electronic components. You can shoot this gun very quickly in semi auto mode, and of course even quicker when full auto is selected.
Accuracy: Again, I tested this Airsoft rifle just like I do my other BB rifles and put 10 rounds into a target from 30 feet out using a semi rested position (sand bag in the front - standing in the rear). I used a non-magnified red dot scope for this test rather than using the built in iron sights. Like my initial WE SCAR test, when I walked up to the paper I was shocked at this Airsoft rifle shooting .20 gram plastic BB's. I again got a 2 inch 10 round grouping! I am beginning to think that a well tuned Airsoft gun can make for a pretty good target plinker!
Build Quality: The King Arms Colt M4A1 Metal AEG Carbine is very well made with a full Metal upper and lower receiver, along with metal parts exactly where they would be on the real steel version of the Colt M4. The only plastic or nylon components are the stocks and the grips and perhaps some internal parts. There is a bit of wiggle in the rear stock and metal magazine but this may be a Colt M4 attribute, for the most part the fit and finish was excellent!
Realism: As with many Airsoft guns, there is great attention to realism and the King Arms Colt M4A1 is no exception. It is an AEG and not a gas blowback Airsoft gun so it does lack some realism in terms of the hard hitting bolt action but on the other hand you can fire what seems like an endless stream of BB's in full auto with this AEG Colt M4A1 Replica. I do like the fact that the charging handle and forward assist works similarly to a real M4 and also the Dust cover cleverly exposes the internal hop-up for easy adjustment. The Colt licensing and branding throughout this M4A1 look-a-like help to really make this Airsoft rifle look believably like a real Colt M4 carbine.
Purchased From: The Replica Airguns Store.
Pros:
Amazing attention to detail with lots of working parts.
Full colt licensing and markings.
All Metal upper and lower receiver, lots of metal parts throughout.
Semi auto & full auto selectable.
High capacity 300+ round magazine.
Removable carry handle with Weaver/Picatinny rail underneath.
Nice high 400+ FPS.
Extremely accurate for plastic BB's.
Fully adjustable sights with two position Peep sights.
6 position adjustable stock.
Easy access to internal hop-up system.
Cons:
Magazine and stock seems bit lose.
Canada version does not come with battery or charger.
Came with the orange flash hider, you may want to replace or paint it if legal in your area?
May be too powerful for inside skirmishes without some detuning.
Comments:
I was not fully sure if I would warm up to an AEG style of Airsoft rifle as I really enjoy the realism of a gas blowback type of replica gun. But the overall realism of the King Arms Colt M4A1 metal AEG really won me over and the added working components like the charging handle and forward assist along with the fully adjustable sights and 6 position stock just made it for me with this Airsoft Carbine. There is something to be said about an AR15 styled gun, they just look the part and this very realistic and usable M4 Airsoft replica is not just great to hold and look at but also performs very well which would make it deadly on the field! Now if only I could find some time to use it on the field ;)
FYI - We just got some more Dan Wesson 6 inch Silver in stock in our Canada Store, we are going to get our pre-order sales units out first to the customers who have been waiting for their pre-paid units and then we will take new orders, if you want one act fast as inventory is limited...
Buy Dan Wesson Revolvers in Canada - Buy Dan Wesson Revolvers in the US
I already mentioned all three of these gun in my previous posts, two being Airsoft: the King Arms Colt M4A1 All Metal and my Western Arms Shorty .40. And one being a 4.5mm steel BB shooter, the Swiss Arms Sig Sauer GSR 1911. I wanted to make you a quick YouTube Preview video to show you around all three replica guns before I get around to actually doing my full reviews for each of them.
I will most likely start off with my King Arms Colt M4A1 All Metal Airsoft rifle, then review my Swiss Arms Sig Sauer GSR 1911 4.5mm BB pistol, then finish off with my deal Airsoft pistol, the Western Arms Shorty 40.
This preview video should give you a good idea about these guns, but make sure to stay tuned for my full review videos for each of them.
I have been very eagerly waiting for my King Arms Colt M4A1 to show up and it finally did. I have wanted an M16 - M4 for some time and to be honest I didn't really care if it was a 4.5mm steel BB shooter or 6mm plastic Airsoft gun. I just wanted it to look the part and hopefully perform well too.
Well I was definitely very happy with the King Arm Colt M4A1 All Metal Airsoft rifle. It looks amazing, has good weight, metal in all the places you would find metal on the real steel version, working bolt assist, working charging handle and both semi and full auto fire modes. My King Arms Colt M4A1 even has a removable carry handle.
And as for performance, it shot right on the money in both fps and accuracy, I don't want to give away too much since I will be doing a full review very soon but you will not be disappointed with this one!
Buy this Airsoft rifle in Canada - Buy this Airsoft rifle in the US
The verdict is not out yet for the Swiss Arms Sig Sauer GSR 1911 4.5mm BB Pistol. I really had no idea what this airgun was like and so I was eagerly awaiting for it to show up so I could get a closeer look at it. For a $79 gun you do get a lot: 400 fps, with a 20 round drop out metal magazine, included laser sight with pressure switch, small pack of 4.5mm zinc plated BB's and a pair of protective shooting glasses. All in all a good value!
The down side is most of the gun is moulded plastic including the laser sight but what do you want for a few bucks? To really know if this airgun is a bargain or not, I will need to test it out on the Chronograph and a target. I think the real world performance is going to make it or break it for me with this one so stay tuned for the upcoming review...
Every once in a while you get kind of lucky and get a real steel on something. Here in Canada, getting your hands on an "all black" Airsoft pistol is kind of hard since they are literally impossible to import as they are considered replicas unless they shoot "over" a set fps which most Airsoft pistols have trouble obtaining. There are some all black guns floating around from before the import restriction and there are some that slip through the cracks.
Yesterday I went into my local Army Surplus store (they also sell Airsoft guns) and saw a rather interesting little black pistol in behind the glass, something I had never seen before. When I looked at it a bit close it was in fact an all black GBB Airsoft pistol version of the Smith & Wesson .40 caliber Shorty! The sales person quickly told me the $50 price tag was because it was non-functioning or as he called it a "Grave Yard Special" I though hey, makes for a nice replica even if it does not work and so I bought it on the spot.
As is pretty normal for me, I rarely take anyone at their word and like to check things out for myself. So I loaded the magazine up with propane, added 20 BB's to the magazine and headed to my deck to give it a try. 20 rounds later and with my slide locked back I came to the conclusion that there was nothing wrong with this Airsoft catch of the day!
If your wondering where to get one I am not really sure, I did see them online in some overseas sites for around $220 or so. So my $50 was well spent ;)
I am in the process of making a "preview video" of this gun and will do a follow up full review video down the road a bit.
One question I get asked often is "Which are my favorite airguns?" or "What are my top 5 gun choices?" I have done my best to avoid answering this question because it's a very hard question to answer and to be truthful on any given day I may come up with a different selection of guns as there are just so many great airguns out there!
So today I took a bunch out and shuffled through them all to see if I could come up with five of my top picks, well at least for today that is, and I'm pretty happy with my selection (Umarex Desert Eagle - ASG CZ 75 P-07 Duty - Baikal MP-654K Makarov - Cybergun Tanfoglio Witness 1911 - ASG Dan Wesson 6 Inch Sliver). I know for a fact they are some excellent choices and if you happen to own or plan on buying one then I'm sure you will agree wiht me.
So checkout this Vimeo Video Review where I go through them and explain what I like about each gun, and why they made my Top 5 Airgun Pick.
One more stock related update for the day! We now have the King Arms Colt M4A1 Metal AEG Airsoft Rifle available in the Canadian Replica Airguns Store in and ready to ship. I will also be receiving this gun early next week for review so make sure to check back for that YouTube Replica Airguns Airsoft Video Review.
Some more good inventory related news! We now have the Cybergun Tanfoglio Witness 1911 A1 Blowback BB Pistol Back in Stock in both the Canadian and US Replica Airgun Stores. So if you've been waiting to order yours you can order one now...
I am still waiting for some updated photos but we now have the Swiss Arms Sig Sauer GSR 1911 BB pistol with laser in stock. I am expecting to get my review copy shipped from the Toronto warehouse early next week so for sure I will have some photos and a better description I can share with you shortly...
I have been asked so many times to make a "How To Video" on cleaning Airguns and Blank Guns so I thought I better make the video so people stop asking me to make one :) and if they do ask, which I am sure they still will, then I will be able to direct them to this awesome video tutorial...
So basically in this video I clean an Airgun that can be field stripped and I also clean an Airgun that can not easily be field stripped. I then clean a blank gun even thought the process is very much the same.
I also talk a bit about cleaners and general air gun maintenance but for the most part I just show you how to clean the guns so watch the video!
The CBSA (Canada Customs) has posted some good news for a change about the Reclassification of Airsoft Guns that shoot over 366fps! (Customs Notice 12-005)
So what does this mean? In a nutshell, any Airsoft gun that shoots a .20 gram airsoft BB at over 366 fps is now considered an uncontrolled firearm just like a regular airgun. And so it can be made out of full metal and look exactly like a real gun even without the red tip. (before the threshold was .22 gram BB had to shoot over 407 fps)
This means we will now be able to bring a lot more "All Metal Replica" Airsoft guns into Canada that where previously not allowed because of our much higher feet per second restrictions.
Here is the official statement from the CBSA:
1. The purpose of this notice is to advise of changes affecting the classification of 6mm calibre airsoft guns.
2. Section 2 of the Criminal Code defines a firearm as “a barrelled weapon from which any shot, bullet or other projectile can be discharged and that is capable of causing serious bodily injury or death to a person, and includes any frame or receiver of such a barrelled weapon, as well as anything that can be adapted for use as a firearm”.
3. As outlined in Memorandum D19-13-2, Importing and Exporting Firearms, Weapons and Devices, it was previously established that an airsoft gun, firing a .22g 6mm plastic pellet, must have a muzzle velocity in excess of 124 m/s (407 fps), in order to be considered a firearm.
4. Based on the latest research, it is now established that the muzzle velocity at which a .20g 6mm plastic airsoft projectile is capable of causing serious bodily injury is 111.6 m/s (366 fps).
5. Airsoft guns, firing a .20g 6mm plastic pellet, with a muzzle velocity above 111.6 m/s (366 fps), will be classified as firearms. Please refer to D19-13-2 for the import requirements of low muzzle velocity firearms, including low muzzle velocity “uncontrolled” firearms.
6. If an airsoft gun, firing a .20g 6mm plastic pellet, shoots below 111.6 m/s (366 fps), and resembles with near precision an existing make and model of a firearm, other than an antique firearm, it will be classified as replica firearm. Replica firearms are prohibited devices and must meet import requirements as listed in D19-13-2.
7. Inquiries and comments about this notice should be directed to: Other Government Department Programs Unit Programs Branch Canada Border Services Agency E-mail: faw-aaf@cbsa-asfc.gc.ca
Here is the direct link to this Customs Notice 12-005 on the CBSA website!
I have a new air pistol for my Canadian customers arriving in about a week! Sorry I have limited info on this Swiss Arms Sig Sauer GSR 1911, I will updating the info here as soon as I know more about it?
I figure at $59 and it comes with a laser sight, safety glasses and 250 BB's to get you stated, well you can't go too wrong! Why not be the first one on the block to have one ;)
This is what I do know so far:
Pre-Order-Special - Save $20 by ordering now and reserving yours now! (Expected the first week in March)
Type: BB air pistol.
Manufacturer:UmarexUSA.
Model:Smith & Wesson M&P R8. Buy in CAN - Buy in US
Materials: Plastic (polymer) and some metal construction.
Weight: 1.37 pounds.
Barrel: 5.1 (6.5) inches, metal smooth bore.
Propulsion: 12 gram CO2 x 1.
Action: Repeater, single and double action.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 8 shot rotary magazine.
FPS: 420.
If you haven't already checked out my Umarex Smith & Wesson M&P Table Top Review, make sure to do so for all the details and specifications on the Umarex S&W M&P R8 CO2 BB Revolver.
This Field Test Review focusses primarily on how the S&W M&P R8 performs in feet per second velocity, its accuracy and of course my comments on it's shoot-ability and CO2 efficiency.
Although the Umarex R8 did not get a very high average FPS rating (336 fps 8 shot average), it was very cold on my test day and on the positive side, the lower FPS enables the R8 to get a lot of shots per CO2, I would imagine you can get close to 200 useable shots out of one CO2 cartridge with the Umarex S&W M&P R8. The low usage of CO2 also make this gun very quiet to shoot so if you live in an area where noise is a factor the R8 may be a great choice for you.
<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->
During my Table Top Review, the trigger felt a bit heavy to me but when actually shooting the R8 it felt pretty good in both single and double action with the double action actually surprising me a bit at how it seemed to smooth out. I was able to get very good double action target results even when shooting close together. When shooting in single action on a target I managed to get six out of eight shots within the 1.5 inch bulls eye, two stragglers made it outside but overall the Umarex S&W M&P R8 shot very well for a smooth bore BB pistol.
As far as mechanical consistency the Umarex S&W M&P R8 performed perfectly for me with no malfunctions of any kind and other then reloading being just a bit awkward (There is not much room to get the magazine out for reloading - very tight tolerances) the Umarex R8 makes for a very decent low cost BB revolver.
If you're on a budget and want a replica CO2 BB revolver with good accuracy and tons of shots per CO2, the Umarex Smith & Wesson M&P makes for a very suitable option.
My Vimeo Field Test Review for the Smith & Wesson M&P R8 BB CO2 Revolver:
Make sure to also checkout my Field Test Review of the Umarex S&W M&P R8 for the real world performance results!
Type: BB air pistol.
Manufacturer: UmarexUSA.
Model: Smith & Wesson M&P R8. Buy in CAN - Buy in US
Materials: Plastic (polymer) and some metal construction.
Weight: 1.37 pounds.
Barrel: 5.1 (6.5) inches, metal smooth bore.
Propulsion: 12 gram CO2 x 1.
Action: Repeater, single and double action.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 8 shot rotary magazine.
FPS: 420.
Trigger Pull: The trigger pull on the Umarex Smith & Wesson M&P R8 is not too bad but has a stickiness to it right at the beginning as the cylinder rotates and pushes the metal spring "feed ramp"in and out. Shooting this revolver pre-cocked in single action mode is a bit smoother but also has some resistance right at the beginning. Overall I would say it has a medium pull to it. UPDATE: When actually shooting this gun, the trigger felt very respectable and I was able to get excellent accuracy result shooting in both single and double action.
Accuracy: Very good! I got 6 out of 8 shots inside my 1.5 inch bullseye and only two shots went outside a bit. these results where done shooting from 20 feet out in a semi-rested position. I also shot freehand in double action shooting quickly and also got a fairly well placed grouping. When it came to FPS performance the Umarex S&W M&P R8 was a bit disappointing (336 fps average 8 shots) but on the plus side it got well over 150 shots per CO2 and was extremely quite to shoot.
Build Quality: This is an almost all external polymer air pistol with some metal components on the inside like the inner barrel, hammer and some other internal framing components. The fit and finish is very good on the S&W M&P R8 and the plastic seems rigid and does not have much flex to it. Overall the R8 has decent weight but I felt another half pound would have helped this gun out.
Realism: The Umarex S&W M&P R8 is a licensed replica of the actual Smith & Wesson M&P R8 revolver. It is a very close looking copy in almost every way. There is a lot of attention to detail that helps make this gun very believable like the Smith and Wesson markings throughout the airgun and full size swing out cylinder!
Provided by: ReplicaAirguns.com
Pros:
Cons:
Comments:
The Umarex Smith & Wesson M&P R8 BB CO2 Revolver based on my first impressions in this table top review portion is a rather nice low cost CO2 revolver. Other than it's low cost, it has a lot going for it like the extensive Smith & Wesson trademarks and the full size swing out 8 round cylinder, just like its hard hitting 357 big brother. The S&W M&P R8 also has an adjustable rear sight and full single and double action trigger for fast paced shooting or slowed down precision. I also really like the well hidden CO2 tab and larger diameter barrel opening that add to the realism of this Air pistol. Yes it shoots BB's only, and yes it is mostly plastic but I think once you start shooting this gun you will quickly forget these two minor shortcomings and remember how little all this enjoyment cost you!
My YouTube Table Top Review for the Smith & Wesson M&P R8 BB CO2 Revolver:
