I've had a few questions about replacing the gips on the Cybergun Tanfoglio Witness 1911 BB pistol and if it is possible to use standard 1911 wood grips? The answer is yes if you don't mind spending about 15-20 minutes removing just a bit of the wood material in a few spots on the 1911 Wood Grips
Here are the instruction thanks to one of my Customers and viewers Michel:
First of all the holes are in the right place thank god for that! A dremel is the ideal tool youll need, and the whole mod.
Mark out the material you want to remove.
Remove the material on bottom part of each grip with a dremel using a cicular sandpaper bit.
Repeat on other grip .On the top of the grip on the mag release side you might have to remove material to clear pin.
After on the other side of the mag release button make sure there is enough clearance for when you depress the button.
I've written a few posts on the Umarex Walther CP99 Compact. It was even featured in my very first YouTube video with my Umarex Walther PPK Full Auto BB Pistol. I do sell the CP99 Compact in my web-store but not the regular version, rather the Recon version. With the Recon version you get a few extras: The Sight Rail, a Red Dot Scope and a Compensator extension which I feel is better value over the standard version.
One thing that I noticed about the Compensator extension is that it's not just an add on simply for looks, this Recon version of the CP99 Compact has a longer barrel inside the compensator which should give the Recon version of the CP99 Compact a bit higher FPS. I will test this theory down the road with my Chrony Chronograph.
I dropped into my local Wholesale Sports Outdoor Outfitters today just to have a look around and walked out with a Champion .22 Caliber Bullet Trap. I figured the time had come to stop using cardboard boxes as my backstops, sure I have lots of backyard and so safety is not an issue but I think this new Champion Bullet Trap will work well for me!
One really nice feature about the Champion Bullet Trap is that it's rated to shoot right up to .22 caliber rimfire bullets (no magnums), so I can use my Henry .22 rimfire Lever action rifle with it too.
I am hoping that it will trap BB's OK, if they tend to get a little lively in it I may have to through a little cardboard in behind my target paper.
The only trouble I encountered was getting it home as I brought my Kawasaki KLX250SF motorcycle with me on this trip but fortunately I had installed a rack on the back that the Champion Bullet Trap fit nicely on to.
One thing that can really add functionality but also give your gun that customized look is a Fore-grip and or a Bipod. I've added two Fore-grips for you to choose from and a really nice barrel mounted quick release Bipod.
You can always have some more holsters, everyones needs are different! Some like it discrete and some like to lay it all out for everyone to see. Now to go with our already existing Beretta 92FS Leather Belt Holster, Nylon Laser Holster and Nylon Shoulder Holster we have two more for you to choose from.
I did have one pistol laser in the Replica Airguns Store but I really wanted to add some more variety, especially when it came to Tactical Lights since I didn't have any of these yet. I picked out a nice selection of lights and lasers from NcSTAR that should fill most requirements for your rifle or pistol.
I already have a customized full auto Drozd Blackbird who can pass up another Dorzd when the price is right! I will be making a double Drozd video down the road :)
My new Classic Drozd came with the Full Auto mod chip, the JimC hand made barrel, a 68ci Nitro Duck 4500 PSI carbon fiber tank and bulk air hose.
I also got the Red Dot scope with my new purchase but used one of my rial risers that fit perfectly giving my new Drozd an AR look to it.
We are starting to get a fair amount of Beretta 92FS styled guns over here at Replica Airguns so I thought it would be nice to have a custom hand made hip holster that perfectly fits the Beretta 92FS styled hand gun.
The one we brought in is custom hand made out of black leather with basket weave detailing, a real high quality belt holster that fits perfectly on your hip.
This fine holster fits many of the Beretta 92 FS styled guns like the:
It's no secret we sell airgun over at the Replica Airguns Store but I added another pretty necessary accessory to the store a bit ago, and that would be CO2, lord knows I go through lots of it!
We now have CO2 available Individually for 99 cents per CO2 cartridge. We also sell it in 50 Unit quantities which works out to 70 cents per CO2 cartridge and if you're expecting a Zombie attach any time soon you can even buy our 400 Unit Pack which works out to 50 cents per CO2 but who's counting money at that point, your just glad to still be alive!
We just got in some Wood Grips for your Zoraki 914. Well technically they are plastic but they look like wood! We have limited supplies of these real imitation wood grain grips and once they are gone they may be gone for ever - or at least till we get some more. That is if we can get some more, it's really hard to say?
Not only do I have some more photos of the Umarex Walther PPQ CO2 Pellet and BB Pistol, but I have one coming direct form Umarex USA so I should have it by mid week and a YouTube video and photos by the end of the week for you...
I found some more photos of the Umarex S&W M&P R8 CO2 BB Revolver although they look just a bit too good so I am thinking they are computer generated. At least it gives us more of an idea on what it looks like!
This may not be a big deal to most of you but if you happen to own or are thinking about getting a Webley Alecto in either a .177 caliber or .22 caliber pellet version, and you are a left handed shooter... then having the appropriate grips is going to make life just a little easier for you!
If you haven't taken a look at the Webley Alecto, maybe you should because it is a pretty amazing Pellet Pistol for target or pest control.
Sorry, I only have the one photo I could find of theUmarex Smith & Wesson M&P 45. This CO2 pistol shoots both BB's and Pellets and looks like it uses some of the design elements from other rotary magazine Umarex guns like the CPSport and CP88. Again I am not sure if the slide is metal or plastic because of the lower weight factor?
Specifications:
Uses 12 gram CO2
4.5mm steel BB's and .177 caliber pellets
380 fps
Double action
8 rounds
1.37 Pounds
Picatinny Rail
Click on the picture below to open them in a larger window.
The Umarex Smith & Wesson M&P R8 is coming to North America, I know that for sure! From what I can tell by looking at the photos and the weight of the gun, it looks like it's got a lot of plastic components? it does have pretty good fps but states double action and not single action? Guess we'll have to see when it gets here?
Specifications:
Uses 12 gram CO2
4.5mm steel BB's
427 fps
Double action
8 rounds
1.1 Pounds
Mostly Plastic?
Picatinny Rail under barrel
Click on the pictures below to open them in a larger window.
I don't have too much in the way of specification for the Umarex S&W 327 TRR8 but I can say it pretty much looks like an ASG Dan Wesson that has been re-skinned! Something I found a bit funny with this gun si that it is supposed to be a TRR8 replica, and the real S&W 327 TRR8 is an 8 shooter and the Umarex copy is a 6 shooter! Maybe they though nobody would notice?
Specifications based on Photos and similar Dan Wesson:
Uses 12 gram CO2
4.5mm steel BB's
400-450 fps
Single & double action
6 rounds
2.25 - 2.5 Pounds
All metal
Picatinny Rail top and bottom
Red Dot Scope accessory
Fore grip accessory
Click on the pictures below to open them in a larger window.
