I already mentioned all three of these gun in my previous posts, two being Airsoft: the King Arms Colt M4A1 All Metal and my Western Arms Shorty .40. And one being a 4.5mm steel BB shooter, the Swiss Arms Sig Sauer GSR 1911. I wanted to make you a quick YouTube Preview video to show you around all three replica guns before I get around to actually doing my full reviews for each of them.

I will most likely start off with my King Arms Colt M4A1 All Metal Airsoft rifle, then review my Swiss Arms Sig Sauer GSR 1911 4.5mm BB pistol, then finish off with my deal Airsoft pistol, the Western Arms Shorty 40.

This preview video should give you a good idea about these guns, but make sure to stay tuned for my full review videos for each of them.

Buy this Airsoft rifle in Canada   -   Buy this Airsoft rifle in the US

Buy Swiss Arms GSR 1911 in Canada

I have been very eagerly waiting for my King Arms Colt M4A1 to show up and it finally did. I have wanted an M16 - M4 for some time and to be honest I didn't really care if it was a 4.5mm steel BB shooter or 6mm plastic Airsoft gun. I just wanted it to look the part and hopefully perform well too.

Well I was definitely very happy with the King Arm Colt M4A1 All Metal Airsoft rifle. It looks amazing, has good weight, metal in all the places you would find metal on the real steel version, working bolt assist, working charging handle and both semi and full auto fire modes. My King Arms Colt M4A1 even has a removable carry handle.

And as for performance, it shot right on the money in both fps and accuracy, I don't want to give away too much since I will be doing a full review very soon but you will not be disappointed with this one!

Buy this Airsoft rifle in Canada   -   Buy this Airsoft rifle in the US

Every once in a while you get kind of lucky and get a real steel on something. Here in Canada, getting your hands on an "all black" Airsoft pistol is kind of hard since they are literally impossible to import as they are considered replicas unless they shoot "over" a set fps which most Airsoft pistols have trouble obtaining. There are some all black guns floating around from before the import restriction and there are some that slip through the cracks.

Yesterday I went into my local Army Surplus store (they also sell Airsoft guns) and saw a rather interesting little black pistol in behind the glass, something I had never seen before. When I looked at it a bit close it was in fact an all black GBB Airsoft pistol version of the Smith & Wesson .40 caliber Shorty! The sales person quickly told me the $50 price tag was because it was non-functioning or as he called it a "Grave Yard Special" I though hey, makes for a nice replica even if it does not work and so I bought it on the spot.

As is pretty normal for me, I rarely take anyone at their word and like to check things out for myself. So I loaded the magazine up with propane, added 20 BB's to the magazine and headed to my deck to give it a try. 20 rounds later and with my slide locked back I came to the conclusion that there was nothing wrong with this Airsoft catch of the day!

If your wondering where to get one I am not really sure, I did see them online in some overseas sites for around $220 or so. So my $50 was well spent ;)

I am in the process of making a "preview video" of this gun and will do a follow up full review video down the road a bit.

 Buy Airsoft guns in Canada   -   Buy Airsoft Pistols in the US

One more stock related update for the day! We now have the King Arms Colt M4A1 Metal AEG Airsoft Rifle available in the Canadian Replica Airguns Store in and ready to ship. I will also be receiving this gun early next week for review so make sure to check back for that YouTube Replica Airguns Airsoft Video Review.

Buy this gun in Canada   -   Buy this gun in the US

The CBSA (Canada Customs) has posted some good news for a change about the Reclassification of Airsoft Guns that shoot over 366fps! (Customs Notice 12-005)

So what does this mean? In a nutshell, any Airsoft gun that shoots a .20 gram airsoft BB at over 366 fps is now considered an uncontrolled firearm just like a regular airgun. And so it can be made out of full metal and look exactly like a real gun even without the red tip. (before the threshold was .22 gram BB had to shoot over 407 fps)

This means we will now be able to bring a lot more "All Metal Replica" Airsoft guns into Canada that where previously not allowed because of our much higher feet per second restrictions.

Here is the official statement from the CBSA:

1. The purpose of this notice is to advise of changes affecting the classification of 6mm calibre airsoft guns.

2. Section 2 of the Criminal Code defines a firearm as “a barrelled weapon from which any shot, bullet or other projectile can be discharged and that is capable of causing serious bodily injury or death to a person, and includes any frame or receiver of such a barrelled weapon, as well as anything that can be adapted for use as a firearm”.

3. As outlined in Memorandum D19-13-2, Importing and Exporting Firearms, Weapons and Devices, it was previously established that an airsoft gun, firing a .22g 6mm plastic pellet, must have a muzzle velocity in excess of 124 m/s (407 fps), in order to be considered a firearm.

4. Based on the latest research, it is now established that the muzzle velocity at which a .20g 6mm plastic airsoft projectile is capable of causing serious bodily injury is 111.6 m/s (366 fps).

5. Airsoft guns, firing a .20g 6mm plastic pellet, with a muzzle velocity above 111.6 m/s (366 fps), will be classified as firearms. Please refer to D19-13-2 for the import requirements of low muzzle velocity firearms, including low muzzle velocity “uncontrolled” firearms.

6. If an airsoft gun, firing a .20g 6mm plastic pellet, shoots below 111.6 m/s (366 fps), and resembles with near precision an existing make and model of a firearm, other than an antique firearm, it will be classified as replica firearm. Replica firearms are prohibited devices and must meet import requirements as listed in D19-13-2.

7. Inquiries and comments about this notice should be directed to: Other Government Department Programs Unit Programs Branch Canada Border Services Agency E-mail: faw-aaf@cbsa-asfc.gc.ca

Update on 2012-03-03 07:19 by Michael Kaye

Here is the direct link to this Customs Notice 12-005 on the CBSA website!

OK we are one step closer to having stock on some Airsoft guns. I have 4 new full-auto rifles for you to choose from in our Canada and US Replica Airguns Stores. In the US Replica Airguns Store they are in stock and ready to sell but we have to wait just a bit for them here in the Canada Replica Airguns Store so I am giving the Canadian version a bit of a pre-sale price reduction to give you some incentive!

The Canadian versions are all high velocity and shoot in the 450 fps range to allow us to sell them to you here in Canada in the "non-clear" solid metal and polymer versions since they will be classified as "non-regulated firearms" just like a regular airgun.

And yes I will be reviewing these Airsoft rifles for you, hopefully all of them :)

King Arms Colt M4A1 Metal AEG Airsoft Rifle

FN Herstal F2000 Tactical AEG Airsoft Rifle

Kalashnikov AK74 SU AEG Airsoft Rifle

AK47 Kalashnikov Tactical 60th Anniversary AEG Airsoft Rifle
 

Buy these Airsoft guns in Canada   -   Buy these Airsoft guns in the US

If you have not already read my Table Top review for the WE SCAR-L, then make sure to check it out for specifications and an overall review of this very nice Blowback Airsoft rifle.

This Field Test review kind of baffled me, I was surprised with almost everything about it. Initially when I got my WE SCAR, I tested it out with one of my CO2 mags and got some pretty decent results not only in FPS performance but also in the accuracy department, I got around 400+fps and a nice 2 inch group from 30 feet out in a semi-rested position.

So when I headed out to record my Field Test, I was expecting some decent results! I'm not going to say this gun let me down but it did perform radically different for me on this day then the previous day and the only real difference is that I did a complete filed strip, clean and lube of the Airsoft rifle which in my opinion should of improved things but I guess not?

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

The most surprising realization I had was that with CO2 (as compared to the Propane), I did notice a heavier blowback and faster rate of fire in full auto but for some reason I had less velocity by almost 100fps when compared to using my Propane magazine? And my accuracy suffered also by an amazing amount. Some rounds had trouble even getting on the paper?

I will revisit this rifle in the summer, I think I will strip it down and wipe it down and perhaps redo this test entirely! I still love this Airsoft blowback rifle for so many reasons but on this day at least it came up a bit short for me.

My Vimeo Video Field Test Review for the WE AWSS SCAR-L - SCAR Type Rifle:

Buy Airsoft rifles in Canada

Buy Airsoft rifles in the US

Make sure to also watch my Field Test Review for the WE SCAR-L!

Type: Airsoft.

Manufacturer:WE.

Model:AWSS SCAR-L Generation 3 Closed Bolt (Tan).

Materials: Metal & Polymer.

Weight: 6.9 pounds.

Barrel: 11.5 inches, metal.

Propulsion: Green-gas - propane - CO2

Action: Semi/full auto, single action.

Ammunition Type: 6mm Plastic BB.

Ammunition Capacity: 30 round magazine.

FPS: 450.

Trigger Pull: The trigger pull on the WE SCAR is very short and light. You can shoot this gun very quickly, that is after you recover from the very heavy blowback action you can really feel in your shoulder.

Accuracy: I thought I would test this Airsoft rifle just like I do my other BB guns, why put it in a class by it's self? So I put about 10 rounds into a target from 30 feet out using a semi rested position (sand bag in the front - standing in the rear). I was using a non magnified red dot so there was going to be some variance on the target from that range no doubt. When I walked up to the paper I was rather stunned as this Airsoft rifle shooting .25 gram plastic BB's got a 2 inch 10 round grouping! This makes for an awesome plinker - Airsoft or not!

Build Quality: The WE AWSS SCAR is very well made with a full CNC Aluminum Upper, all steel internals and very high quality polymer lower receiver and folding stock. As far as I could tell all the external mechanical parts are also metal including the trigger, selector switch magazine release, bolt catch release, charging handle. all accessory rails and sights and anything else I missed! The Magazine is also metal.

Realism: One thing about most Airsoft guns is the attention to realism and in this area they generally have the edge over their 4.5mm Steel BB shooting brothers. This WE SCAR copy is 100% true in design and even field strips exactly like the real NATO round firing version. It even has the true marking indicating "MK 16MOD O and CAL. 5.56 MM." on the upper receiver. Like the real SCAR, everything functions the same including the semi auto and full auto selector switch :)

Purchased From: Private sale.

Pros:

• Amazing attention to detail.

• All CNC aluminium upper.

• All metal internals and metal external mechanical parts.

• Semi auto & full auto selectable.

• Awesome blowback kick really hits you in the shoulder.

• Field strips just like the real steal.

• Nice high 400+ FPS even with .25 gram BB's

• Extremely accurate for plastic BB's.

• Full ambidextrous, even the charging handle can be switch side to side.

• Can use propane or CO2 with the appropriate magazine.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Not cheap to buy in Canada.

• Eats CO2 pretty quickly.

• Because of heavy blowback, you need to check wear and tear on the parts often.

• May be too powerful for skirmishes without some detuning.

Comments:

This is really my first Airsoft review and for the most part my first real serious Airsoft gun. I do have a Crosman M50 (UZI copy) that I bought a while back and I will review it also but it was one of those Canadian see through guns that look like kids toys :( Getting back to the WE AWSS SCAR-L... I just love the design of this type of rifle, I even bought the almost exact same gun in a .22 rimefire - the ISSC MK22 SCAR, check that review out if you have are looking for  a .22LR gun. Again getting back to the WE AWSS SCAR-L!! It's got so much going for it. Quality, realism, performance, made by a reputable Airsoft company and as far as GBB Airsoft guns go it is well priced!

For those that like to skirmish or use these in Airsoft war games, they may want to go with the AEG (Automatic Electric Gun) version because they require less reloading and have more sustained FPS. But for me since I don't really do any Airsoft war games, well at least not yet? I kind of like the realism of the blowback with its kick and more realistic magazine capacities. Since I go after the most realistic guns I can get, this Airsoft rifle really speaks to me and just because it shoots a plastic BB rather then a metal BB, I really can't say it makes to much difference for what I'm shooting at anyways. I point it at stuff and the stuff gets knocked down and generally with the same hole in it my 4.5mm BB's would have made. Look forward to more Airsoft reviews in the future...

My Vimeo Video Review for the WE AWSS SCAR-L - SCAR Type Rifle:

Buy Airsoft rifles in Canada   -   Buy Airsoft rifles in the US

I wanted to get this video out to you a bit sooner but I have been really sick the past three days and so I have not had a lot of time to put this YouTube Video together. It's a pretty simple compilation of some photos and videos I took during my time walking around the 2012 SHOT Show in Las Vegas, not all of it is to do with airguns but most of it is. I even took a few touristy shots since it wasn't all work ;)

This isn't an Airsoft review just yet but I will be reviewing the WE SCAR Gas Blowback 6mm Airsoft Rifle next week, I just purchased this one used from another fellow YouTuber "FuzzyDicePimp" who was gracious enough to sell me his.

You will have to bare with me a bit on this first review as I more experience with Airguns so I think my first Airsoft review may be a bit more of me comparing the WE AWSS SCAR-L to my airguns but then again I don't really have that many tactical rifle styled air guns to compare it to.

The WE SCAR I am reviewing is a generation 3 with the closed bolt system, it came with a gas magazine but I purchased a couple of CO2 mags as that is more what I am use to. So we will see if I can get a propane converter and I can do a comparison of the two magazines in my review.

My first impression of this gun is "WOW" FuzzyDicePimp sent it to me with some juice in the magazine so I shot a few rounds through it. I had some .12 gram 6mm Airsoft BB's lying around and I also had some 6mm steel ball bearings, both of these really seemed to shoot hard and the blowback on the WE SCAR is very solid.

Check back next week for more on this very nice Airsoft Rifle.

Buy Airsoft rifles in Canada   -   Buy Airsoft rifles in the US

We now have some extra magazines available for our popular BB shooting Colt Special Combat! Not only odes the magazine hold the 20 rounds of BB's but also a CO2 cartridge. So if you already have a Colt Special Combat or you're thinking of getting one, be sure to pickup an extra magazine while you're at it!

Buy this Magazine in Canada

My recently acquired (Thanks UmarexUSA) Umaerx EBOS CO2 BB Machine Gun was just screaming for some add-ons and to be honest the first thing that I noticed was the open sights really needed upgrading. Luckily the rear sight is removable allowing you to mount just about any type of Red Dot Scope or sighting system you want, just make sure it is high enough to see up and over the front BB hopper.

I decided to go with an EOTech Styled Red-Green Dot Tactical Scope and I have to tell you this guns looks awesome with it installed!

I finished off the look with an unobtrusive Tactical Rail Mount Flashlight. All in all I think I spent about as much if not more on accessories for this gun as it is worth to buy :)

Buy BB Rifles in Canada

Buy BB Rifles in the US

Type: CO2 BB Shotgun.
Manufacturer: UmarexUSA.
Model: Walther SG9000.
Materials: Plastic (polymer) and some metal construction.
Weight: 2.35 pounds.
Barrel: 11.5 inches, metal non-rifled.
Propulsion: CO2 x 1 (88 gram).
Action: Semi auto, double action only.
Ammunition Type: 4.5mm BB's
Ammunition Capacity: 40 shot internal spring fed magazine.
FPS: 480 (single shot) - 250 (three shot burst).
Trigger Pull: The trigger pull on the Umarex Walther SG 9000 is in the mid range and is a bit long but once you get used to it you can fire off shots very quickly with little resistance. There really aren't any sticky spots in the trigger pull to speak of.

Accuracy: I shot this CO2 BB Shotgun at a target from the hip 20 feet away using my NcSTAR laser sight I installed on it in a free standing position, and it performed excellent getting a 1.5 inch grouping fairly centered on target. I also performed my accuracy test from 30 feet out in a semi-rested position using my 6x32 NcSTAR Scope and again I got a 1.5 inch grouping proving that a BB gun can show decent accuracy even from further out when setup properly. With my Chrony Chronograph testing I scored much higher then the factory claimed feet per second of 480fps in single shot mode and 250fps in three shot burst mode. I ended up getting an average 8 shot fps in single shot mode of 504fps and 309fps in three shot burst mode!
Build Quality: This is an almost all external polymer air gun with some metal components on the inside giving the Walther SG9000 a bit of a light to medium overall weight but once you add the large 88 gram CO2 cartridge and some accessories this gun can quickly gain a pound or two. All four accessory rails are metal along with the trigger. The fit and finish is very good on the SG9000 and the plastic quality seems very durable.

Realism: The Umarex Walther SG9000 is licensed by Walther but other then a similarity in the pistol grip it doesn't closely look like any specific Walther product or any specific Tactical shotgun for that matter. It does have a very tactical look and with a few accessories added you will have yourself a very persuasive looking shotgun on your hands.
Supplied by UmarexUSA - Can be purchased from: The Replica Airguns Store.

Pros:

• Inexpensive versatile BB shotgun.
• Nothing else really like it out there.
• Multiple shooting modes - singe and three shot burst.
• Uses 88 Gram CO2 so less stopping to change CO2.
• Very good FPS readings - above factory claims.
• Very accurate for a BB gun from close up and further out.
• Lots of rail locations for all kinds of accessories and different customizable looks.
• High capacity 40 round internal magazine.
• Totally fun!

Cons:

• The plastic exterior may put off some people looking for a heavier more metal gun.
• 88 Gram CO2 can be a bit pricy, not as cost effective as 12 gram CO2.
• Trigger pull is kind of long.
• You will need to purchase some sort of a sighting system for it as all you have is a rail on top.

Comments:
The Umarex Walther SG9000 is a really fun and very inexpensive CO2 BB shotgun. With its multiple shooting modes you have the option of power and accuracy in single shot mode or to simply blow stuff away in three shot burst mode. The Walther SG9000 is also very customizable allowing you to really make this Tactical BB shotgun your own by decking it out with just about any combination of add ons and accessories you like! I found this gun the most fun to shoot in three shot burst mode using my laser sight and literally knocking down everything I pointed at!

Watch my YouTube Video Review of the Umarex Walther SG9000 CO2 BB Shotgun:

Buy this gun in Canada   -   Buy this gun in the US

Mil3 sent me some more updated photos of his customized Cybergun Tanfoglio Witness 1911 now with the Sight Rail add on.

Buy this gun in Canada   -   Buy this gun in the US

Type: BB air pistol.

Manufacturer: Umarex.

Model: CP99 Compact Recon Version.

Materials: Metal slide, polymer frame.

Weight: 1.8 pounds.

Barrel: 5 inches, non-rifled.

Propulsion: CO2 x 1.

Action: Semi auto, blowback, single action only.

Ammunition Type: Steel BBs 4.5mm.

Ammunition Capacity: 18 rounds.

FPS: Up to 400.

Trigger Pull: The trigger pull on the Umarex CP99 Compact Recon is amazing, it is short and light making it one of the best action shooters I own. You can fire this gun accurately and fast all day long.

Accuracy: Great! The addition of the Green Dot Scope and slightly longer barrel on the CP99 Compact Recon version work amazingly well, this is one of the most consistent BB shooter I own getting under 2 inch groups at will from 20 feet out.

Build Quality: Excellent, this BB gun is made in Japan and uses metal where it is really needed like in the slide, slide release, safety, trigger, magazine release, magazine and most of the mechanical parts. It's well made, well finished and feels great in the hand.

Realism: This Replica BB gun has many of the same characteristics of the actual 9mm P99 Compact with the exception of having a longer handle and much different safety mechanism. Umarex has even changed the design a bit with the newer CP99 Compacts and made the ejection port cut out adding to the realism of this BB shooter.

Available at: the Replica Airguns Store.

Pros:

• Decent reproduction of the original Walther P99 Compact 9mm.

• Would make an excellent training gun as it has a similar size, weight, and feel to the actual Walther P99 Compact 9mm handgun.

• Blowback action is very firm adding to the realism of shooting this weapon.

• Really good FPS, accuracy and CO2 efficiency for a blowback BB air gun.

• The Recon version has a longer barrel adding a few more FPS to this already great air pistol.

• Amazing light and fast trigger pull making it a blast to shoot.

• Addition of the Sight Rail, Compensator and Green Dot scope really add to the esthetics and performance of this BB pistol.

Cons:

• The Sight Rail, Compensator and most of the Green Dot scope are plastic but this does not seem to effect the performance in any way.

• Safety lever seems out of place and takes away from the realism of this replica.

• Switch on the Green Dot Scope is silver making it stand out from the rest of the all black air gun.

Comments:

I already loved the CP99 Compact non-Recon version so I had very high expectations for this BB gun to be at least as good if not better and I was not disappointed! I was actual surprised at the improvements that the longer barrel and Green Dot Scope made not only in a much higher Feet Per Second rating (about 75 fps), but also the much improved accuracy in what was already a decent shooter. For the additional $40, you get the Sight Rail which allows you to add multiple accessories if required. You get the Green Dot Scope that noticeably improved the accuracy, and you also get the compensator which hides the extra long barrel for more FPS.

Buy BB Pistols in Canada

Buy BB Pistols in the US

I can't help but share some of the photos my happy viewers and customers send me and it seem like the hot item right now is the Cybergun Tanfoglio Witness 1911 CO2 BB Pistol yet again.

These latest photos are brought to you by Mil3 who added rubber grips and an accessory rail to his Tanfoglio Witness 1911. He said the rubber grips only needed some slight carving out on the back side to make them fit.

Buy this gun in Canada   -   Buy this gun in the US

 

I've had a few questions about replacing the gips on the Cybergun Tanfoglio Witness 1911 BB pistol and if it is possible to use standard 1911 wood grips? The answer is yes if you don't mind spending about 15-20 minutes removing just a bit of the wood material in a few spots on the 1911 Wood Grips

Here are the instruction thanks to one of my Customers and viewers Michel:

First of all the holes are in the right place thank god for that! A dremel is the ideal tool youll need, and the whole mod.

1. Mark out the material you want to remove.
2. Remove the material on bottom part of each grip with a dremel using a cicular sandpaper bit.
3. Repeat on other grip .On the top of the grip on the mag release side you might have to remove material to clear pin.

After on the other side of the mag release button make sure there is enough clearance for when you depress the button.

Here are a few pictures of the mod. Have fun:

Buy this gun in Canada   -   Buy this gun in the US

I've written a few posts on the Umarex Walther CP99 Compact. It was even featured in my very first YouTube video with my Umarex Walther PPK Full Auto BB Pistol. I do sell the CP99 Compact in my web-store but not the regular version, rather the Recon version. With the Recon version you get a few extras: The Sight Rail, a Red Dot Scope and a Compensator extension which I feel is better value over the standard version.

One thing that I noticed about the Compensator extension is that it's not just an add on simply for looks, this Recon version of the CP99 Compact has a longer barrel inside the compensator which should give the Recon version of the CP99 Compact a bit higher FPS. I will test this theory down the road with my Chrony Chronograph.

Enjoy the picture for now...

Buy this gun in Canada   -   Buy similar gun in the US

I dropped into my local Wholesale Sports Outdoor Outfitters today just to have a look around and walked out with a Champion .22 Caliber Bullet Trap. I figured the time had come to stop using cardboard boxes as my backstops, sure I have lots of backyard and so safety is not an issue but I think this new Champion Bullet Trap will work well for me!

One really nice feature about the Champion Bullet Trap is that it's rated to shoot right up to .22 caliber rimfire bullets (no magnums), so I can use my Henry .22 rimfire Lever action rifle with it too.

I am hoping that it will trap BB's OK, if they tend to get a little lively in it I may have to through a little cardboard in behind my target paper. 

The only trouble I encountered was getting it home as I brought my Kawasaki KLX250SF motorcycle with me on this trip but fortunately I had installed a rack on the back that the Champion Bullet Trap fit nicely on to.

One thing that can really add functionality but also give your gun that customized look is a Fore-grip and or a Bipod. I've added two Fore-grips for you to choose from and a really nice barrel mounted quick release Bipod.

• NcSTAR - Tactical Fore-grip (with Rail)
• NcSTAR - AR-15 Heavy Duty Fore-grip
• NcSTAR - Quick Release Uni-Bipod

NcSTAR - Tactical Fore-grip (with rail)

C$21.00

NcSTAR - AR-15 Heavy Duty Fore-grip

C$45.00

NcSTAR - Quick Release Uni-Bipod

C$45.00