I just received some of my ASG Airsoft guns in my BC location and wanted to make an update video for you so you can see them up close and perhaps see how they stack up against their Airgun counterparts. Keep in mind many of my ASG guns are only available in the Canada Replica Airguns Store, we do have some ASG Airsoft guns for my US based customers but this time here in Canada I have more to offer my Canadian folks!

The Dan Wesson's, the Steyr M9-A1, STI Duty One 1911, CZ 75 P-07 Duty are all pretty much identical to my 4.5mm Steel BB shooting versions with the exception of not having blowback but the good news is the slides do in fact move on the semi autos! Of course the Dan Wesson is just made to accept 6mm Airsoft BB's rather than 4.5mm steel BB's.

I am also super impressed with the high quality of the LMT Defender M4 Carbines, they are a serious bit of gear and have some very good heft to them, even more so than my full metal King Arms M4A1 I already sell and have done a full review of, not to take anything away from the Kings Arms product as it is very good at its price point.

I also received my first sniper rifle and have played around with it a bit to see what it is capable of. I added a bipod to the front and a 3x9 power scope as the ASG AW .308 comes pretty bare bones but ready for all you can throw at it. I can say it likes heavier Airsoft BB's, as the .20 gram ones I started with seemed to fly off in all directions due to the high velocity, even stepping up to a .25 gram BB tightened my group up significantly at 30 feet. I have heard this rifle really prefers heavy Airsoft BB's so I plan do do my review based on that information.

Enjoy my Vimeo Video Update focusing on the new ASG Airsoft lineup.

Buy ASG Airsoft Pistols in Canada

Buy ASG Airsoft Rifles in Canada

Buy Airsoft guns in the US

Slowly but surely we are getting some more ASG Airsoft guns and this time I have another pistol and three rifles!

ASG STI Duty One 1911 Non-Blowback Airsoft Pistol

The STI Duty One 1911 Non-Blowback Airsoft Pistol is a full size replica of the actual STI Duty one 1911 pistol which is a modernized and upgraded version of the original classic Colt 1911. You will find features like; an integrated weaver rail for lasers and tactical lights, high rise beavertail grips, a unique serial number on each air pistol and STI licensed markings. (BUY NOW)

• 6mm plastic Airsoft BB's
• CO2 powered
• 16 rounds
• 436 fps
• 1.8 pounds
• 8.6 inches
• Non-Blowback
• Integrated weaver rail
• licensed markings

ASG AW .308 Airsoft Sniper Rifle

The ASG AW .308 very powerful spring operated Airsoft Sniper Rifle and has licensed Accuracy International AW .308  markings. Out of the box it shoots close to 2 joule and weights almost 7 pounds with its solid metal construction. The Sportline AW .308 has adjustable Hop-Up for accuracy and top rail for mounting a scope. (BUY NOW)

• 6mm plastic Airsoft BB's
• Spring powered
• 28 rounds
• 449 fps
• 6.61 pounds
• Adjustable Hop-Up System
• Integrated top rail mount
• licensed markings 

ASG LMT Defender R.I.S. Airsoft Carbine

The ASG LMT Defender R.I.S. is a classic carbine with a few modifications. The normal front guard has been replaced with a full rail interface system (R.I.S.), that gives you plenty of opportunities to mount accessories. As the normal battery space is used by the R.I.S. the wiring to the battery goes back to the stock. The stock is a special sopmod stock with two compartments to house the battery. The functionality is similar to the other LMT ProLine models – Adjustable hop up, 1.5 joule power and semi & full auto. (BUY NOW)

• 6mm plastic Airsoft BB's
• Spring powered
• 350 rounds
• 394 fps
• 7.45 pounds
• Metal body.
• S.I.R. Rail.
• Full metal forward rails
• Sling mounts.
• 350 rd. hi-cap metal magazine.
• Collapsible stock.
• Stable muzzle velocity.
• Authentic LMT (Lewis Machine & Tool Company) markings. 

The Proline (PL) range of products, are high-end products, targeted at regular players, players who want to have better than average Airsoft gun and Milsim/teamplayers. The Proline models can be modified and upgraded.

ASG LMT Defender4 S.I.R. Airsoft Carbine 

Two well known firearms and accessory manufactures have joined forces to create this beauty of a Proline Airsoft AEG. The full metal Defender4 Carbine licensed by LMT upgraded with the S.I.R. rail system licensed by A.R.M.S.. A Selective Integrated Rail system (S.I.R.) offers a wide variety of options to mount tactical accessories. Quick and handy flip-up iron sights are mounted on the S.I.R. Strong and well built with what is probably one of the best out-of-the-box gearboxes, heavy reinforced with 8 and 9 mm bearings, steel gears, and ball-bearing spring-guide as well as an upgraded cylinder set. It can handle Li-Po batteries and shoots 1.5 joule (120m/s/394 fps) in semi- and full-auto mode with Easily adjustable Hop-Up. (BUY NOW)

• 6mm plastic Airsoft BB's
• Spring powered
• 350 rounds
• 394 fps
• 7.8 pounds
• Metal body.
• S.I.R. Rail.
• Detachable rear flip-up sight
• Flip-up front sight.
• Sling mounts.
• 350 rd. hi-cap metal magazine.
• Collapsible stock.
• Stable muzzle velocity.
• Authentic LMT (Lewis Machine & Tool Company) markings.    

The Proline (PL) range of products, are high-end products, targeted at regular players, players who want to have better than average Airsoft gun and Milsim/teamplayers. The Proline models can be modified and upgraded.

As promised, the new ASG Airsoft Pistols have been added to the Replica Airguns Store and by the way none of them have the orange tip as they are all classified as Uncontrolled Firearms just like a standard Airgun!

Dan Wesson Airsoft Revolvers:

The legendary revolvers licensed by Dan Wesson These revolvers have authentic markings and an individual serial number stamped into the frame. The revolvers features a single and double action trigger system and adjustable rear sight for extra realism and accuracy. The Dan Wesson BB revolvers are made of metal except for the ergonomical grip constructed in hard ABS plastic.

The 12g CO2 cartridge is stored under the grip and is easily accessed by sliding the grip to the side – easy-load style. Each of the 6 cartridges holds one Airsoft BB and is placed in the metal drum that rotates as each round is fired. The revolvers comes with a speed loader, changeable tactical rail and 6 cartridges.

Dan Wesson Revolver - 2.5 inch Black (Airsoft)

• No orange tip!
• 6mm Plastic Airsoft BB's
• CO2 powered
• 6 rounds
• 390 fps
• 1.9 pounds
• 8 inches
• Single and double action
• All metal design
• licensed markings

Dan Wesson Revolver - 4 inch Silver (Airsoft) 

• No orange tip!
• 6mm Plastic Airsoft BB's
• CO2 powered
• 6 rounds
• 440 fps
• 2 pounds
• 9.5 inches
• Single and double action
• All metal design
• licensed markings

Dan Wesson Revolver - 6 inch Silver or Grey (Airsoft) 

• No orange tip!

• 6mm Plastic Airsoft BB's

• CO2 powered

• 6 rounds

• 453 fps

• 2.25 pounds

• 11.7 inches

• Single and double action

• All metal design

• licensed markings

Dan Wesson Revolver - 8 inch Grey (Airsoft) 

• No orange tip!
• 6mm Plastic Airsoft BB's
• CO2 powered
• 6 rounds
• 540 fps
• 2.3 pounds
• 13.3 inches
• Single and double action
• All metal design
• licensed markings 

 CZ 75 P-07 Duty Non-Blowback (Airsoft)

The CZ 75 P-07 DUTY is the new generation of the CZ 75 family which was first designed back in 1975 by the famous small arms manufacturer Česká zbrojovka, Czech Republic. This is the semi automatic 4.5mm airgun version fully licensed by CZ. It is powered by a 12g CO2 cartridge stored in the grip using the easy-load system and the Airsoft BB’s are put in the drop-out magazine.

The CZ 75 P-07 DUTY is a compact tactical upgraded version compared to the standard CZ 75. Besides being more compact in size the P-07 DUTY has an integrated front waiver rail for mounting light and laser. The grip and metal slide carries authentic CZ markings and every gun comes with unique serial number. 

• No orange tip!
• 6mm Airsoft BB's
• CO2 powered
• 16 rounds
• 415 fps
• 1.8 pounds
• 7.3 inches
• Non-blowback
• Metal slide
• licensed markings

Steyr M9-A1 Non-Blowback (Airsoft)

The ASG Steyr M9-A1 Non-Blowback CO2 6mm AIrsoft BB pistol is a faithful copy of the real model Steyr mannlicher M9-A1 complete with licensed trade marks and a functional safety pin. You will get over 465fps shots from the 14 round drop out magazine and just like the real steal you can add a laser site or tactical light to the weaver style accessory rail.

• No orange tip!
• 6mm Airsoft BB's
• CO2 powered
• 14 rounds
• 465 fps
• 1.3 pounds
• 7.36 inches
• Non-blowback
• Weaver style accessory rail
• licensed markings

Just a quick heads up for our Canadian customers waiting on Dan Wesson Revolvers, the ASG Airguns and some Airsoft guns have now cleared customs, we still have some more Airsoft guns from ASG coming down the road but at least we have some to start with for now.

PLEASE KEEP IN MIND that we have a very large backorder list and we will be doing our best to send out the backordered Dan Wesson starting tomorrow. It will take some time to get caught up so please try to avoid sending us an email about your backordered Dan Wesson, we are working very hard to get them to all of you and will update everyone with a tracking number as soon as yours ships.

If you are interested in some of the ASG Airsoft guns then make sure to check back over the next few days as I update our Airsoft guns section or our Canada Replica Airguns Store with the new ASG Airsoft items.

We have been waiting a while here in Canada for some of our ASG products to come back in stock. ASG provides us with our Dan Wesson line and the Dan Wesson Revolvers have been a very popular airgun to say the least. We did  manage to get a few of them, mainly to fill some of the earlier back orders but this big order had to come by cargo ship and now it has arrived and has been with Canada customs for about a week so we should be close to having them for you!

The hold up on this shipment is because we have some ASG Airsoft guns in with the regular Airguns which is good news as we will soon be stocking some very nice ASG Airsoft Pistols and Rifles but the new Airsoft guns are the main reason that Canada Customs is taking their time giving their OK on this shipment.

My advice to anyone who has been waiting a long time for their Dan Wesson Revolver (Mostly the 2.5 & 4 inch versions) is to hold on a bit longer because the wait is almost over and we will sell out of these guns quickly so having your backorder in guarantees you will get yours.

Buy ASG Airguns in Canada   -   Buy ASG Airguns in the US

It's always good to start the week off with an update video so everyone knows what's happening short-term and long-term...

I recently acquired a couple new items that I will be reviewing in the near future (along with several other reviews that I will be trying to get to ASAP!) First off is the Crosman M4-177 which is basically a multi-pump pellet and BB shooting replica of an AR or M4 styled carbine used by the US military. The Crosman M4-177 is mostly plastic on the outside but on first inspection seems to be built fairly well. It has removable metal sights and the magazine is also detachable but is not used as a magazine but rather a compartment for storage. The unit I have is the Canadian detuned version which shoots .177 caliber lead pellets and 4.5mm steel BB's at under 500 fps.

I don't currently sell the Crosman M4-177 in the Canada Replica Airguns Store but I do have it available for purchase in the US Replica Airguns Store for my US customers.

I also received my first old west blank shooting revolver (M1873), I have wanted one of these for a while and finally got my hands on one :) Unfortunately this one has a plugged barrel so it vents out of the cylinder area which may get a bit messy. I may see about making this one a front venting gun if possible and of course as long as it's within the law as I plan to make sure the cylinder stays semi plugged so no actual rounds could ever be shot out of it. The Old West M1873 Blank Revolver holds six .380 crimped blanks and is an all metal and wood construction. This should be a fun review!

I also touch upon a few other guns on the list of items I need to review and by the way in an attempt to get caught up I will be doing my Table Top and Shooting reviews combined.

Here are some of the guns that I will be reviewing over the next while...

• Gamo P-25 & PT-85 .177 Caliber Blowback Pellet pistols (This one will get done this week!)

• Daisy Powerline 5501 Blowback 4.5mm BB pistol.

• Webley Tempest .177 & .22 Caliber Spring Piston Air Pistol.

• Western Arms Smith & Wesson Shorty 40 Blowback 6mm Airsoft Pistol.

• Kimar Lady K Stainless Steel 9mm P.A.K. Blank Pistol

• EKOL Lady Chrome 9mm P.A.K. Blank Pistol. 

THIS SILENT AUCTION IS NOW CLOSED

Another great opportunity for some of my Canadian based customers to get yourself a blank firing gun here in Canada. Today I bring you three models, two front firing blank pistols from EKOL in Gloss Black (Arda and Dicle) and one Italian made top venting Bruni Model 92 in Chrome.

Let's take a look at them now...

First we have an EKOL Arda in Gloss Black:

• Front firing.
• 8mm P.A.K. blanks.
• 5 round capacity.
• Single action only.
• Like new condition and may have never been fired!
• Comes with hard case and manual.
• Checkout my full video review of a similar EKOL Arda.

Second up is an EKOL Dicle in Gloss Black:

• Front firing.
• 9mm P.A.K. blanks.
• 15 round capacity.
• Single and double action.
• Like new condition and may have never been fired!
• Comes with hard case and manual.
• Check my full video review of a similar EKOL Dicle.

Lastly we have a stunning Bruni Mod. 92 in Chrome:

• Top venting.
• 8mm P.A.K. blanks.
• 15 round capacity.
• Single and double action.
• Comes with hard case.
• Excellent condition!

All these guns are up for silent auction and this is how it works:

1. Send me an email with your top price as you will be bidding against others for the top offer. (Taxes and shipping will be added to your bid)
2. If you want more than one of these blank guns, please bid on each gun individually.
3. You have till Friday May 11th midnight to get your top bid in place.
4. Once the top bidder has been selected I will send them an email to notify them that they are the top bidder and Payment will be required within 24 hours or the next top bidder will be selected and notified.

If you live in the US then simply order blank guns from our US Replica Airguns Store!

Checkout my Youtube Video about this silent auction with some closeup video of each blank gun.

Type: Airsoft.

Manufacturer:King Arms.

Model:Colt M4A1 Metal AEG.

Materials: Metal & Nylon.

Weight: 6 pounds.

Barrel: 15 inches, metal.

Propulsion: AEG

Action: Semi/full auto, single action.

Ammunition Type: 6mm Plastic BB (recommended .20 gram plus).

Ammunition Capacity: 300+ round magazine.

FPS: 450.

If you haven't already checked out my King Arms Colt M4A1 Table Top Review, make sure to do so for all the details and specifications on the King Arms Colt M4A1 Airsoft AEG Carbine.

This Field Test Review focusses primarily on how the AEG  M4A1 performs in feet per second velocity using .25 gram plastic Airsoft BB's, its accuracy in both semi and full auto and of course my comments on it's shoot-ability and overall performance.

For this field test review of my King Arms M4A1 Airsoft rifle I switched from the .20 gram Airsoft BB's to heavier .25 gram plastic BB's. I did this to have a comparison between the two weights since I had already Chronographed and accuracy tested the .20 gram BB's. As expected the fps dropped a bit, down to around 380 fps but still stayed very consistent for me as would be expected with an AEG styled rifle.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Another reason I wanted to test out the heavier .25 gram Airsoft BB's is because generally speaking, heavier BB's will shoot a bit more accurately as they are not as effected by the higher fps this guns is capable of shooing. The .20 gram BB's actually did well so I had high expectation for the .25 gram BB's and I was not disappointed! For this test I shot the King Arms Colt M4A1 from 30 feet out in a semi rested position (rested on a sand bag in the front and standing in the back). I shot 10 rounds in semi auto and got a very respectable 1.5 inch group which rivals any airgun in my collection! I also shot in full auto (I can't really tell you how many rounds ;) and the King Arms Colt M4A1 punched a nice 2 inch hole in the target. I would almost say it even beat out my other full auto 4.5mm steel BB shooting guns in terms of how tight of a group it can shoot while in full auto mode.

I am sure the Airsoft Hop-up system has something to do with the accuracy as the back-rotating BB's should keep a truer trajectory. One thing I notice while shooting this AEG styled Airsoft rifle, is that there is a slight delay from the time you pull the trigger till the shot is released. The trigger is actually activating a motor which in turn pulls the internal spring back, which then releases it once it hits the end of it's cycle. It's not a long delay but it is noticeable. In full auto it really does not matter at all :)

All in all I am again impressed with what an Airsoft gun can do in terms of both looks and performance.

My Vimeo Field Test Review for the King Arms Colt M4A1 6mm AEG Airsoft Carbine:

Buy this Airsoft rifle in Canada   -   Buy this Airsoft rifle in the US

Type: Airsoft.

Manufacturer:King Arms.

Model: Colt M4A1 Metal AEG.

Materials: Metal & Nylon.

Weight: 6 pounds.

Barrel: 15 inches, metal.

Propulsion: AEG

Action: Semi/full auto, single action.

Ammunition Type: 6mm Plastic BB (recommended .20 gram plus).

Ammunition Capacity: 300+ round magazine.

FPS: 450.

Trigger Pull: The trigger pull on the King Arms Colt M4A1 is fairly short and light as it is essentially just an on off switch for the internal electronic components. You can shoot this gun very quickly in semi auto mode, and of course even quicker when full auto is selected.

Accuracy: Again, I tested this Airsoft rifle just like I do my other BB rifles and put 10 rounds into a target from 30 feet out using a semi rested position (sand bag in the front - standing in the rear). I used a non-magnified red dot scope for this test rather than using the built in iron sights. Like my initial WE SCAR test, when I walked up to the paper I was shocked at this Airsoft rifle shooting .20 gram plastic BB's. I again got a 2 inch 10 round grouping! I am beginning to think that a well tuned Airsoft gun can make for a pretty good target plinker!

Build Quality: The King Arms Colt M4A1 Metal AEG Carbine is very well made with a full Metal upper and lower receiver, along with metal parts exactly where they would be on the real steel version of the Colt M4. The only plastic or nylon components are the stocks and the grips and perhaps some internal parts. There is a bit of wiggle in the rear stock and metal magazine but this may be a Colt M4 attribute, for the most part the fit and finish was excellent!

Realism: As with many Airsoft guns, there is great attention to realism and the King Arms Colt M4A1 is no exception. It is an AEG and not a gas blowback Airsoft gun so it does lack some realism in terms of the hard hitting bolt action but on the other hand you can fire what seems like an endless stream of BB's in full auto with this AEG Colt M4A1 Replica. I do like the fact that the charging handle and forward assist works similarly to a real M4 and also the Dust cover cleverly exposes the internal hop-up for easy adjustment. The Colt licensing and branding throughout this M4A1 look-a-like help to really make this Airsoft rifle look believably like a real Colt M4 carbine. 

Purchased From: The Replica Airguns Store.

Pros:

• Amazing attention to detail with lots of working parts.

• Full colt licensing and markings.

• All Metal upper and lower receiver, lots of metal parts throughout.

• Semi auto & full auto selectable.

• High capacity 300+ round magazine.

• Removable carry handle with Weaver/Picatinny rail underneath.

• Nice high 400+ FPS.

• Extremely accurate for plastic BB's.

• Fully adjustable sights with two position Peep sights.

• 6 position adjustable stock.

• Easy access to internal hop-up system.

Cons:

• Magazine and stock seems bit lose.

• Canada version does not come with battery or charger.

• Came with the orange flash hider, you may want to replace or paint it if legal in your area?

• May be too powerful for inside skirmishes without some detuning.

Comments:

I was not fully sure if I would warm up to an AEG style of Airsoft rifle as I really enjoy the realism of a gas blowback type of replica gun. But the overall realism of the King Arms Colt M4A1 metal AEG really won me over and the added working components like the charging handle and forward assist along with the fully adjustable sights and 6 position stock just made it for me with this Airsoft Carbine. There is something to be said about an AR15 styled gun, they just look the part and this very realistic and usable M4 Airsoft replica is not just great to hold and look at but also performs very well which would make it deadly on the field! Now if only I could find some time to use it on the field ;)

Buy this Airsoft rifle in Canada 

Buy this Airsoft rifle in the US

FYI - We just got some more Dan Wesson 6 inch Silver in stock in our Canada Store, we are going to get our pre-order sales units out first to the customers who have been waiting for their pre-paid units and then we will take new orders, if you want one act fast as inventory is limited...

Buy Dan Wesson Revolvers in Canada   -   Buy Dan Wesson Revolvers in the US

I already mentioned all three of these gun in my previous posts, two being Airsoft: the King Arms Colt M4A1 All Metal and my Western Arms Shorty .40. And one being a 4.5mm steel BB shooter, the Swiss Arms Sig Sauer GSR 1911. I wanted to make you a quick YouTube Preview video to show you around all three replica guns before I get around to actually doing my full reviews for each of them.

I will most likely start off with my King Arms Colt M4A1 All Metal Airsoft rifle, then review my Swiss Arms Sig Sauer GSR 1911 4.5mm BB pistol, then finish off with my deal Airsoft pistol, the Western Arms Shorty 40.

This preview video should give you a good idea about these guns, but make sure to stay tuned for my full review videos for each of them.

Buy this Airsoft rifle in Canada   -   Buy this Airsoft rifle in the US

Buy Swiss Arms GSR 1911 in Canada

I have been very eagerly waiting for my King Arms Colt M4A1 to show up and it finally did. I have wanted an M16 - M4 for some time and to be honest I didn't really care if it was a 4.5mm steel BB shooter or 6mm plastic Airsoft gun. I just wanted it to look the part and hopefully perform well too.

Well I was definitely very happy with the King Arm Colt M4A1 All Metal Airsoft rifle. It looks amazing, has good weight, metal in all the places you would find metal on the real steel version, working bolt assist, working charging handle and both semi and full auto fire modes. My King Arms Colt M4A1 even has a removable carry handle.

And as for performance, it shot right on the money in both fps and accuracy, I don't want to give away too much since I will be doing a full review very soon but you will not be disappointed with this one!

Buy this Airsoft rifle in Canada   -   Buy this Airsoft rifle in the US

One question I get asked often is "Which are my favorite airguns?" or "What are my top 5 gun choices?" I have done my best to avoid answering this question because it's a very hard question to answer and to be truthful on any given day I may come up with a different selection of guns as there are just so many great airguns out there!

So today I took a bunch out and shuffled through them all to see if I could come up with five of my top picks, well at least for today that is, and I'm pretty happy with my selection (Umarex Desert Eagle - ASG CZ 75 P-07 Duty - Baikal MP-654K Makarov - Cybergun Tanfoglio Witness 1911 - ASG Dan Wesson 6 Inch Sliver). I know for a fact they are some excellent choices and if you happen to own or plan on buying one then I'm sure you will agree wiht me.

So checkout this Vimeo Video Review where I go through them and explain what I like about each gun, and why they made my Top 5 Airgun Pick.

Buy these guns in Canada   -   Buy these guns in the US

One more stock related update for the day! We now have the King Arms Colt M4A1 Metal AEG Airsoft Rifle available in the Canadian Replica Airguns Store in and ready to ship. I will also be receiving this gun early next week for review so make sure to check back for that YouTube Replica Airguns Airsoft Video Review.

Buy this gun in Canada   -   Buy this gun in the US

Make sure to also checkout my Field Test Review of the Umarex S&W M&P R8 for the real world performance results!

Type: BB air pistol.
Manufacturer: UmarexUSA.
Model: Smith & Wesson M&P R8. Buy in CAN  -  Buy in US
Materials: Plastic (polymer) and some metal construction.
Weight: 1.37 pounds.
Barrel: 5.1 (6.5) inches, metal smooth bore.
Propulsion: 12 gram CO2 x 1.
Action: Repeater, single and double action.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 8 shot rotary magazine.
FPS: 420.
Trigger Pull: The trigger pull on the Umarex Smith & Wesson M&P R8 is not too bad but has a stickiness to it right at the beginning as the cylinder rotates and pushes the metal spring "feed ramp"in and out. Shooting this revolver pre-cocked in single action mode is a bit smoother but also has some resistance right at the beginning. Overall I would say it has a medium pull to it. UPDATE: When actually shooting this gun, the trigger felt very respectable and I was able to get excellent accuracy result shooting in both single and double action.

Accuracy: Very good! I got 6 out of 8 shots inside my 1.5 inch bullseye and only two shots went outside a bit. these results where done shooting from 20 feet out in a semi-rested position. I also shot freehand in double action shooting quickly and also got a fairly well placed grouping. When it came to FPS performance the Umarex S&W M&P R8 was a bit disappointing (336 fps average 8 shots) but on the plus side it got well over 150 shots per CO2 and was extremely quite to shoot.

Build Quality: This is an almost all external polymer air pistol with some metal components on the inside like the inner barrel, hammer and some other internal framing components. The fit and finish is very good on the S&W M&P R8 and the plastic seems rigid and does not have much flex to it. Overall the R8 has decent weight but I felt another half pound would have helped this gun out.

Realism: The Umarex S&W M&P R8 is a licensed replica of the actual Smith & Wesson M&P R8 revolver. It is a very close looking copy in almost every way. There is a lot of attention to detail that helps make this gun very believable like the Smith and Wesson markings throughout the airgun and full size swing out cylinder!
Provided by: ReplicaAirguns.com

Pros:

• I don't know the shooting side of things just yet but here's what I can tell you so far.
• Should have decent FPS and good CO2 usage.
• Inexpensive but decent build quality.
• I like that the cylinder is full size and looks real.
• Adjustable rear sight.
• Well hidden CO2 tab.
• Full S&W licensing, very good replica.
• Single and double action trigger.
• Magazine is removable for easy loading and you can get extras.
• Easy to add accessories to it and make it customized to your liking.

Cons:

• The plastic exterior may put off some customers looking for a more metal gun.
• Lighter weight makes it feel a bit cheap.
• Trigger action is a bit sticky at the beginning.
• I would have liked to see this one in a pellet shooter.

Comments:
The Umarex Smith & Wesson M&P R8 BB CO2 Revolver based on my first impressions in this table top review portion is a rather nice low cost CO2 revolver. Other than it's low cost, it has a lot going for it like the extensive Smith & Wesson trademarks and the full size swing out 8 round cylinder, just like its hard hitting 357 big brother. The S&W M&P R8 also has an adjustable rear sight and full single and double action trigger for fast paced shooting or slowed down precision. I also really like the well hidden CO2 tab and larger diameter barrel opening that add to the realism of this Air pistol. Yes it shoots BB's only, and yes it is mostly plastic but I think once you start shooting this gun you will quickly forget these two minor shortcomings and remember how little all this enjoyment cost you!

My YouTube Table Top Review for the Smith & Wesson M&P R8 BB CO2 Revolver:

Buy this gun in Canada   -   Buy this gun in the US

OK we are one step closer to having stock on some Airsoft guns. I have 4 new full-auto rifles for you to choose from in our Canada and US Replica Airguns Stores. In the US Replica Airguns Store they are in stock and ready to sell but we have to wait just a bit for them here in the Canada Replica Airguns Store so I am giving the Canadian version a bit of a pre-sale price reduction to give you some incentive!

The Canadian versions are all high velocity and shoot in the 450 fps range to allow us to sell them to you here in Canada in the "non-clear" solid metal and polymer versions since they will be classified as "non-regulated firearms" just like a regular airgun.

And yes I will be reviewing these Airsoft rifles for you, hopefully all of them :)

King Arms Colt M4A1 Metal AEG Airsoft Rifle

FN Herstal F2000 Tactical AEG Airsoft Rifle

Kalashnikov AK74 SU AEG Airsoft Rifle

AK47 Kalashnikov Tactical 60th Anniversary AEG Airsoft Rifle
 

Buy these Airsoft guns in Canada   -   Buy these Airsoft guns in the US

UPDATE: The 4 inch Black and 6 inch Silver Dan Wesson Revolvers are now back in Stock!

First, the bad news... We are sold out in our Canada Store of some of our most popular Airguns; this includes most of the ASG Dan Wesson revolvers along with the STI Duty One, and the very popular Cybergun Witness 1911.

Now for the good news! You can pre-order these while we get some more back in stock and save $20 while also reserving yours ahead of the non-pre-orders.

We are looking at about a 2-3 week wait while we get more in and as soon as they are back in stock we are putting the price back up so if one of these has been on your wish-list then make sure to grab one on sale now!

Dan Wesson Revolver - 2.5 inch Silver (Pre-Order-Special - Save $20)

C$179.00

Tanfoglio Witness 1911 A1 Blowback (Pre-Order-Special - Save $20)

C$149.00

STI Duty One 1911 Blowback (Pre-Order-Special - Save $20)

C$159.00

Finally got my hands on a Umarex Smith & Wesson M&P R8 Revolver to review for you. I have been waiting for what seems like forever and although it is a bit on the light side it looks durable enough. I will hopefully be staring my review process at the tail end of this week.

There is a lot of use of plastic in the S&W M&P R8 but I can say it does make for a good all weather robust kind of shooter. It does feel good and solid in the hand and I like the fact that the swing out cylinder is all one piece with no tell tail sign of a pellet or BB magazine like some of the other revolvers on the market. I'm not sure if it's going to stack up to the Dan Wesson line but then again it is only a fraction of the cost of a Dan Wesson revolver.

Buy this gun in Canada   -   Buy this gun in the US

I wanted to get this video out to you a bit sooner but I have been really sick the past three days and so I have not had a lot of time to put this YouTube Video together. It's a pretty simple compilation of some photos and videos I took during my time walking around the 2012 SHOT Show in Las Vegas, not all of it is to do with airguns but most of it is. I even took a few touristy shots since it wasn't all work ;)

OK, so I took a day off to appease the wife and did some "shopping" but then today it was back to business and I made the wife come along for the ride, she was a good sport about it so it all worked out!

I went back to Umarex and Crosman, just to verify a few things, first of all, the Umarex P38 is in fact a blowback pistol and it has a nice 400 claimed fps. I am looking forward to testing this one!.

I also went back to Crosman to checkout the C51 and the C*TT to see if the C51 Glock-ish looking replica had a polymer frame which it does and also to see if the C*TT is blowback which it is not :( But it is mostly metal and has a working slide so there is hope for the C*TT.

I dropped by the ASG booth but there was nothing really new there. I already have pretty much all their 4.5mm BB guns but they do have a nice selection of Airsoft guns, and speaking of Airsoft guns I am spending a significant amount of my time these days looking into the Airsoft market and what I can bring into Canada for sale. I have been talking with several suppliers and we should have some nice offering for us Canadians shortly so stay posted on this one...

Lastly, I have a few 22LR guns coming my way that I will be reviewing. yes I know they are not airguns but whenever I review a 22LR gun, I get a lot of questions and if you are like me, and you have your PAL, the 22LR guns make a nice addition to your low cost guns that you can buy and shoot for a fraction of the cost of the larger caliber guns out there.

Today I stopped by Chiappa and checked them out. I have a 1911 Tactical 22LR on the way that I will be reviewing and I may get some more 22LR from Chiappa down the road if the 1911 reviews well. By the way I also have a 22lR M22 ISSC "Glock" styled pistol also on it's way for review!

 

Well that's it from the Vegas  SHOT SHow 2012 for now, see you on the flip-side!