Type: BB air pistol.
Manufacturer: Swiss Arms.
Model: Sig Sauer GSR 1911.
Materials: Mostly plastic construction with a few metal parts.
Weight: 1.3 pound.
Barrel: 4.5 inches, metal non-rifled.
Propulsion: CO2 x 1.
Action: Semi auto, double action.
Ammunition Type: 4.5mm BB's.
Ammunition Capacity: 20 round magazine.
FPS: 398 claimed - 450 real world.
Trigger Pull: The Swiss Arms Sig Sauer GSR 1911 has a double action trigger with about a medium weight pull to it. It does feel somewhat long as the break point seems to take a while to get to but once you master where it is, you can shoot this BB gun with surprising accuracy.
Accuracy: Once I sorted out the laser sight which took some MacGyvering (as explained in the video), this gun shot a nice tight pattern! For my quick test I shot free standing from 20 feet away and put 8 rounds into my target taking my time. I got about a 1.5 inch group which was very good and another note worth mentioning would be the Chronograph results I got, even though the Sig Sauer GSR 1911 CO2 BB pistol has a claimed fps of 398, mine came in consistently right around 450 fps!

Build Quality: The Swiss Arms GSR 1911 is mostly plastic and has very few actual moving parts, I'm personally not too worried about it, in fact the lack of moving parts means there is less to go wrong with it! I found the fit and finish to be good overall and as long as you are OK with the plastic this gun should be just fine for you. The only thing that would have been nice to see improved would be the laser and how it is adjusted. As is out of the box without modification, you will find that it easily moves out of aim. (I do explain how I fixed this problem in my video review)
Realism: The Swiss Arms Sig Sauer GSR 1911 in terms of size and looks, is about what the real gun would look like, with the exception of the trigger which is kind of a strange looking combination of triggers mashed into one. Of course being a moulded plastic airgun, it is much lighter then the real steel 1911 and has the telltale screw holes on the right hand side. The magazine ejector does work but the real steel safety, slide catch/release, hammer and grip safety are all moulded into the plastic so they do not function. On a good note the barrel muzzle is large like a real 45 caliber adding to the realism.
Purchased this gun from: The Replica Airguns Store.

Pros:

• Much better than advertised FPS and good CO2 usage. (up to 200 shots).
• Good accuracy once you get the laser working with the gun it adds to the ease of targeting. 
• Inexpensive and comes with lots of extra stuff that ads value. (Safety Glasses, Laser Sight, Starter BB's)
• Well hidden CO2 tab and 45 caliber sized muzzle.
• Full Sig Sauer licensing, decent replica in terms of looks
• Drop out metal magazines, compatible with other airguns (Umarex Beretta Elite II, S&W M&P)

Cons:

• Pretty much all plastic and not many working parts (less to go wrong)
• light weight makes it feel a bit on the cheap side.
• Trigger action is long and takes some getting used to.
• Laser sight needs to be MacGyvered a bit to make it stay sighted in (again watch my video on how to fix this).

Comments:
The Swiss Arms Sig Sauer GSR 1911 is pretty much what you would expect from a low cost airgun in terms of build quality, lots of plastic, with less working parts. This does not take away from the performance however as the GSR 1911 performed well in both accuracy and power. It also comes with the laser sight, safety glasses and starter BB's as an added bonus for about the same price as many entry level airguns on their own. If you like ultra realistic guns then this is on may not be for you, but if you want a good performer with the replica look and combined with a value package then I think you will be more than happy with the Swiss Arms Sig Sauer GSR 1911.

My YouTube Video Review for the Swiss Arms Sig Sauer GSR 1911 CO2 Air Pistol:

Buy Swiss Arms GSR 1911 in Canada

Type: Airsoft.

Manufacturer:Western Arms (WA).

Model:Shorty 40.

Materials: Polymer & Metal.

Weight: 1.7 pounds.

Barrel: 3 inches, metal.

Propulsion: GBB

Action: Semi auto, single & double action.

Ammunition Type: 6mm plastic BB (recommended .20 gram).

Ammunition Capacity: 20 round magazine.

FPS: 260-270.

Trigger Pull: The trigger pull on the Western Arms Smith & Wesson Shorty 40 is very light in both single and double action but of course the lightest when shooting in single action mode. The single action is short with next to no reset making for very quick followup shots. If you have de-cocked the gun using the de-cocker, you may find it hard to re-cock again as there is no exposed hammer to grab. You will need to pull the trigger just a bit to expose the hammer and then pull it back the rest of the way as per normal.

Accuracy: This is now the third Airsoft gun I have tested and I always assumed Airsoft guns would not be nearly as accurate as my metal BB shooters but again I have been proven wrong! The WA S&W Shorty 40 even with its short 3 inch barrel got a nice 2 inch group my first time testing it out from 20 feet out in a free standing position. And 4 shots got right in the bullseye! Considering this Airsoft gun was supposed to be non-working, it worked pretty good for me!

Build Quality: When you first pickup the Western Arms Smith & Wesson Shorty .40, you immediately think it is an all metal gun since it's all black and has really good weight to it sitting in at 1.7 pounds and in a very small package. On close up inspection the WA Shorty 40 has a lot of plastic in it including the slide and the frame. Polymer frames are not uncommon and to be honest if the gun looks and feels like metal but is actually plastic, there are some benefits. This review model being used has seen some action but it looks pretty much like a brand new gun, the reason being is because of the plastic exterior - in general, plastic is not painted but rather the color is throughout the material so it will not rub off or show a scratch nearly as much as a painted or blued finishe which will show the grey metal underneath. And to be fair, my Western Arms Shorty 40 has lots of high quality metal parts where they really need to be like the magazine, magazine release, slide catch, trigger, hammer, barrel and many other internal parts.

Realism: From looking at photos of the real Smith & Wesson Shorty 40, I can say the Airsoft version is a dead ringer. The Western Arms version has all the markings and and licensing in all the right places and from what I can tell without actually having used the real steel version, it seems to function and even field strip like the real .40 caliber model. The only real telltale sign are the plastic parts but as I said before it is very hard to tell because of this Airsoft guns heavy weight.

Purchased From: Used.

Pros:

• I got this one as a bargain ($50) to say the least.

• Very realistic replica with full licensing.

• Seems to be very accurate for a short barreled Airsoft pistol.

• Decent FPS for a compact GBB Airsoft gun.

• Even thought the frame and slide are polymer, it has very good weight and feel to it.

• Everything works like the original, field strips and most mechanical parts are metal.

• Safety also works as the de-cocker.

• Adjustable rear sight for windage.

• Very nice light single and double action trigger.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Hard to find this one, not in production as far as I know?

• Plastic slide and frame but still very high quality.

• Seems to go through gas fast - 20 BB's and it's done!

Comments:

For those of you who have been a bit down on the Airsoft guns I have been reviewing, maybe you just haven't put your hands on the right ones so far? I am now on my third Airsoft product review and I have received all kinds of comments from people ranging from very positive to very negative, with some people comparing Airsoft guns to kids toys. The funny thing is it's all about perspective - people who only shoot powder burners will say an Airgun is a toy but again many powder burner shooters also shoot airguns for economical and practical reasons. I think we should respect peoples interest and if it's not for you then stick with what is for you but at least first give it a chance. I plan to take part in some Airsoft games so this is a great time for me to see what Airsoft guns I like and will work well once I get in a battle situation. Now getting back to the Western Arms Smith & Wesson Shorty 40 at hand... It is a pleasure to shoot and for a "Broken" gun it sure works well, I wonder what a new pristine condition one would shoot like? It's hard for me to tell you to go out and buy one since they are not readily available but if you do manage to come across one, grab it if you can!

My Vimeo Video Review for the Western Arms Smith & Wesson Shorty 40 Airsoft Pistol:

Buy Airsoft guns in Canada   -   Buy Airsoft Pistols in the US

Type: Airsoft.

Manufacturer:King Arms.

Model: Colt M4A1 Metal AEG.

Materials: Metal & Nylon.

Weight: 6 pounds.

Barrel: 15 inches, metal.

Propulsion: AEG

Action: Semi/full auto, single action.

Ammunition Type: 6mm Plastic BB (recommended .20 gram plus).

Ammunition Capacity: 300+ round magazine.

FPS: 450.

Trigger Pull: The trigger pull on the King Arms Colt M4A1 is fairly short and light as it is essentially just an on off switch for the internal electronic components. You can shoot this gun very quickly in semi auto mode, and of course even quicker when full auto is selected.

Accuracy: Again, I tested this Airsoft rifle just like I do my other BB rifles and put 10 rounds into a target from 30 feet out using a semi rested position (sand bag in the front - standing in the rear). I used a non-magnified red dot scope for this test rather than using the built in iron sights. Like my initial WE SCAR test, when I walked up to the paper I was shocked at this Airsoft rifle shooting .20 gram plastic BB's. I again got a 2 inch 10 round grouping! I am beginning to think that a well tuned Airsoft gun can make for a pretty good target plinker!

Build Quality: The King Arms Colt M4A1 Metal AEG Carbine is very well made with a full Metal upper and lower receiver, along with metal parts exactly where they would be on the real steel version of the Colt M4. The only plastic or nylon components are the stocks and the grips and perhaps some internal parts. There is a bit of wiggle in the rear stock and metal magazine but this may be a Colt M4 attribute, for the most part the fit and finish was excellent!

Realism: As with many Airsoft guns, there is great attention to realism and the King Arms Colt M4A1 is no exception. It is an AEG and not a gas blowback Airsoft gun so it does lack some realism in terms of the hard hitting bolt action but on the other hand you can fire what seems like an endless stream of BB's in full auto with this AEG Colt M4A1 Replica. I do like the fact that the charging handle and forward assist works similarly to a real M4 and also the Dust cover cleverly exposes the internal hop-up for easy adjustment. The Colt licensing and branding throughout this M4A1 look-a-like help to really make this Airsoft rifle look believably like a real Colt M4 carbine. 

Purchased From: The Replica Airguns Store.

Pros:

• Amazing attention to detail with lots of working parts.

• Full colt licensing and markings.

• All Metal upper and lower receiver, lots of metal parts throughout.

• Semi auto & full auto selectable.

• High capacity 300+ round magazine.

• Removable carry handle with Weaver/Picatinny rail underneath.

• Nice high 400+ FPS.

• Extremely accurate for plastic BB's.

• Fully adjustable sights with two position Peep sights.

• 6 position adjustable stock.

• Easy access to internal hop-up system.

Cons:

• Magazine and stock seems bit lose.

• Canada version does not come with battery or charger.

• Came with the orange flash hider, you may want to replace or paint it if legal in your area?

• May be too powerful for inside skirmishes without some detuning.

Comments:

I was not fully sure if I would warm up to an AEG style of Airsoft rifle as I really enjoy the realism of a gas blowback type of replica gun. But the overall realism of the King Arms Colt M4A1 metal AEG really won me over and the added working components like the charging handle and forward assist along with the fully adjustable sights and 6 position stock just made it for me with this Airsoft Carbine. There is something to be said about an AR15 styled gun, they just look the part and this very realistic and usable M4 Airsoft replica is not just great to hold and look at but also performs very well which would make it deadly on the field! Now if only I could find some time to use it on the field ;)

Buy this Airsoft rifle in Canada 

Buy this Airsoft rifle in the US

I already mentioned all three of these gun in my previous posts, two being Airsoft: the King Arms Colt M4A1 All Metal and my Western Arms Shorty .40. And one being a 4.5mm steel BB shooter, the Swiss Arms Sig Sauer GSR 1911. I wanted to make you a quick YouTube Preview video to show you around all three replica guns before I get around to actually doing my full reviews for each of them.

I will most likely start off with my King Arms Colt M4A1 All Metal Airsoft rifle, then review my Swiss Arms Sig Sauer GSR 1911 4.5mm BB pistol, then finish off with my deal Airsoft pistol, the Western Arms Shorty 40.

This preview video should give you a good idea about these guns, but make sure to stay tuned for my full review videos for each of them.

Buy this Airsoft rifle in Canada   -   Buy this Airsoft rifle in the US

Buy Swiss Arms GSR 1911 in Canada

I have been very eagerly waiting for my King Arms Colt M4A1 to show up and it finally did. I have wanted an M16 - M4 for some time and to be honest I didn't really care if it was a 4.5mm steel BB shooter or 6mm plastic Airsoft gun. I just wanted it to look the part and hopefully perform well too.

Well I was definitely very happy with the King Arm Colt M4A1 All Metal Airsoft rifle. It looks amazing, has good weight, metal in all the places you would find metal on the real steel version, working bolt assist, working charging handle and both semi and full auto fire modes. My King Arms Colt M4A1 even has a removable carry handle.

And as for performance, it shot right on the money in both fps and accuracy, I don't want to give away too much since I will be doing a full review very soon but you will not be disappointed with this one!

Buy this Airsoft rifle in Canada   -   Buy this Airsoft rifle in the US

One question I get asked often is "Which are my favorite airguns?" or "What are my top 5 gun choices?" I have done my best to avoid answering this question because it's a very hard question to answer and to be truthful on any given day I may come up with a different selection of guns as there are just so many great airguns out there!

So today I took a bunch out and shuffled through them all to see if I could come up with five of my top picks, well at least for today that is, and I'm pretty happy with my selection (Umarex Desert Eagle - ASG CZ 75 P-07 Duty - Baikal MP-654K Makarov - Cybergun Tanfoglio Witness 1911 - ASG Dan Wesson 6 Inch Sliver). I know for a fact they are some excellent choices and if you happen to own or plan on buying one then I'm sure you will agree wiht me.

So checkout this Vimeo Video Review where I go through them and explain what I like about each gun, and why they made my Top 5 Airgun Pick.

Buy these guns in Canada   -   Buy these guns in the US

One more stock related update for the day! We now have the King Arms Colt M4A1 Metal AEG Airsoft Rifle available in the Canadian Replica Airguns Store in and ready to ship. I will also be receiving this gun early next week for review so make sure to check back for that YouTube Replica Airguns Airsoft Video Review.

Buy this gun in Canada   -   Buy this gun in the US

Type: .22 caliber pistol.

Manufacturer:Chiappa.

Model:1911-22 Tactical.

Materials: Metal (Chiappalloy & Steel).

Weight: 2 pounds.

Barrel: 5 inches, metal rifled.

Propulsion: Gun Powder.

Action: Semi auto, single action only.

Ammunition Type: .22LR caliber rimfire.

Ammunition Capacity: 10 round magazine.

FPS: 1,138 - 1255.

Trigger Pull: The trigger pull on the Chiappa - Puma 1911-22 Tactical semi auto pistol is fairly heavy at the start of it's life at close to 10 pounds! This is a bit distracting but it has been reported that as the metals harden and the gun breaks in (Closer to the 2000-3000 round mark), you can expect a much lighter trigger pull of closer to 5 pounds.

Accuracy: I put about 500 rounds through the Chiappa - Puma 1911-22 and took some time getting used to how it felt and also shot several groups on target before I did my final test group. I shot two full magazines (20 shots) and was able to get a 6-7 inch group from 10 yards out (30 feet). I was shooting in a standing unrested position using the open sights unadjusted and my grouping was well center but just a tad bit high and to the left. Interestingly enough I had a nice tight 5 shot sub-group that all landed within each other almost dead center on target.

Build Quality: The Chiappa - Puma 1911-22 Tactical 22LR is not built out of the same hardened steel material (with the exception of some key high stress areas) as you would find in a large caliber hand gun as it is not necessary with the lower pressure of 22LR rimfire ammunition, but it is an almost all metal gun and seems to have decent fit and finish. Chiappa utilizes a special proprietary metal they call Chiappalloy throughout much of the pistol to make the 1911-22 look, feel and weigh about the same as a conventional 1911 45 auto. 

Realism: The Chiappa - Puma 1911-22 Tactical looks the part for sure of a real 1911 A1 styled 45 auto. It even feels about the same weight and has a similar balance to it. On the outside you can tell because of the smaller diameter .22 caliber barrel and the lack of a working grip safety. Internally the 1911-22 has a fixed barrel which is not true to the original 1911 design but it does make the 22LR version more accurate and simpler in design.

Purchased From: Wholesale supplier.

Pros:

• Inexpensive to purchase and shoot but still has that "1911" look and feel.

• Came with two 10 round magazines.

• Comes in a nice hard shell case.

• Can add an accessory rail under the barrel.

• Adjustable rear sight for windage.

• Fixed barrel for better accuracy and less moving parts.

• Nice realistic weight adn ballance to it.

• Very easy to take down and clean.

• Similar dimensions to a real 1911 and should fit most holsters and add-ons.

• Has a secondary "tool based" firing pin lock for safe storage.

• Made in Italy.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Trigger is very heavy at first - needs to be broken in!

• Slide spring is very light which can lead to some cycling problems if you are not careful.

• No working grip safety like the real 1911.

• Plastic magazines.

Comments:

My Chiappa - Puma 1911-22 Tactical first impression was that it kind of had a blank gun look and finish too it which is not a bad thing but I wondered if it would take the abuse of constant 22LR rounds being shot through it and it most certainly did. Chiappa has put hardened steel where it needs to be and used their proprietary Chiappalloy where it is best suited. after about the first 100 rounds the 1911-22 stated performing consistently for me using a couple of brands of 22LR I brought with me and cycled both 22LR Standard Velocity and High Velocity just fine. I did notice it started to act up at around the 400 round mark but on inspection, the Chiappa 1911-22 just needed a cleaning to clear the debris that was forming in the breach area. I would also suggest keeping the magazines loaded up fore a few weeks to decrease the spring tension which helps with chambering the first couple of rounds out of a new magazine. Overall, I am really happy with my Chiappa 1911-22 purchase and plan to shoot this gun often and extensively!

My Vimeo Video Review for the Chiappa 1911-22 Tactical .22LR Pistol:

Buy BB version in Canada   -   Buy BB version in the US

Type: .22 caliber pistol.

Manufacturer:ISSC.

Model:M22.

Materials: Metal & Polymer.

Weight: 1.5 pounds.

Barrel: 4.17 inches, metal rifled.

Propulsion: Gun Powder.

Action: Semi auto, single action.

Ammunition Type: .22LR caliber rimfire.

Ammunition Capacity: 10 round magazine.

FPS: 1,138 - 1255.

Trigger Pull: The trigger pull on the ISSC M22 semi auto pistol is fairly light at about 4.4 pounds and it has a nice predictable break point. Some people claim the trigger itself is a bit edgy but I did not find this the case for myself at least when shooting off several hundred rounds at a time. No blisters for me :)

Accuracy: I put about 500 rounds through the ISSC M22 and took some time getting used to how it felt and also shot several groups on target before I did my final test group. I shot two full magazines (20 shots) and most of my shots (17 out of 20) landed within a 3 inch group from 10 yards out (30 feet). I was shooting in a standing unrested position using the open sights unadjusted and my grouping was well center but just a tad bit high. I was very happy with these results.

Build Quality: The ISSC M22 is a very well made pistol in just about every way. The materials are very good and the fit and finish is excellent. There is nothing cheap about this gun and even after over 500 shots through the M22, it still looked brand new (after a well needed cleaning of course) with barely any wear marks to speak of. I especially liked the solid aluminum magazines. I have no doubt this 22 caliber pistol will last me for a long time.

Realism: The ISSC M22 may not be a bang on copy of a Glock but it certainly looks the part with only a few exceptions like the rear hammer, safety and fixed internal barrel. I have even heard you can use real Glock accessories with this semi auto pistol! Even the kick kind of surprised me, I was using high velocity 22LR rounds and they gave me a nice crisp recoil that of course was not as hard as a 9mm but never the less it was enough for working on double taps and rapid sight acquisition.

Purchased From: Wholesale supplier.

Pros:

• Inexpensive to purchase and shoot but still has that "Glock like" look and feel.

• Came with two 10 round magazines.

• Very well made - no quality issues as far as I can tell.

• Accessory rail under the barrel.

• Very usable sights similar to a real Glock. (also fully adjustable).

• Ambidextrous safety and de-cocker.

• Similar trigger safety as a real Glock.

• Very easy to take down and clean.

• Nice compact and light weight.

• Similar dimensions to a Glock and may work with many of the same accessories.

• Made in Austria like the Glock.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Can come off of safety kind of easy.

• Some Glock users may not like the external hammer and safety setup?

• Some people have commented on it being a bit picky with certain ammo and the trigger being a bit edgy.

Comments:

I really fell in love with the ISSC M22 22LR Glock copy. I know this gun is going to get a lot of use and to be honest I'm not even worried about it. With the low cost of 22LR ammo I will be shooting this gun more than any of my other pistols simply because it's totally fun, and gives me almost the exact same experience as my larger caliber semi auto shooters at about 1/10th the price to shoot. I'm pretty sure I will even get out to the range more often knowing that I can shoot the entire day for about $20! I found the M22 to be reliable, accurate and comfortable while shooting so as far as I'm concerned the ISSC M22 is a real winner!

My Vimeo Video Review for the ISSC M22 Glock Copy .22LR Pistol:

Buy BB version in Canada   -   Buy BB version in the US

Type: BB air pistol.

Manufacturer:UmarexUSA.

Model:Smith & Wesson M&P R8. Buy in CAN  -  Buy in US

Materials: Plastic (polymer) and some metal construction.

Weight: 1.37 pounds.

Barrel: 5.1 (6.5) inches, metal smooth bore.

Propulsion: 12 gram CO2 x 1.

Action: Repeater, single and double action.

Ammunition Type: 4.5mm steel BB's.

Ammunition Capacity: 8 shot rotary magazine.

FPS: 420.

If you haven't already checked out my Umarex Smith & Wesson M&P Table Top Review, make sure to do so for all the details and specifications on the Umarex S&W M&P R8 CO2 BB Revolver.

This Field Test Review focusses primarily on how the S&W M&P R8 performs in feet per second velocity, its accuracy and of course my comments on it's shoot-ability and CO2 efficiency.

Although the Umarex R8 did not get a very high average FPS rating (336 fps 8 shot average), it was very cold on my test day and on the positive side, the lower FPS enables the R8 to get a lot of shots per CO2, I would imagine you can get close to 200 useable shots out of one CO2 cartridge with the Umarex S&W M&P R8. The low usage of CO2 also make this gun very quiet to shoot so if you live in an area where noise is a factor the R8 may be a great choice for you.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

During my Table Top Review, the trigger felt a bit heavy to me but when actually shooting the R8 it felt pretty good in both single and double action with the double action actually surprising me a bit at how it seemed to smooth out. I was able to get very good double action target results even when shooting close together. When shooting in single action on a target I managed to get six out of eight shots within the 1.5 inch bulls eye, two stragglers made it outside but overall the Umarex S&W M&P R8 shot very well for a smooth bore BB pistol.

As far as mechanical consistency the Umarex S&W M&P R8 performed perfectly for me with no malfunctions of any kind and other then reloading being just a bit awkward (There is not much room to get the magazine out for reloading - very tight tolerances) the Umarex R8 makes for a very decent low cost BB revolver.

If you're on a budget and want a replica CO2 BB revolver with good accuracy and tons of shots per CO2, the Umarex Smith & Wesson M&P makes for a very suitable option.

My Vimeo Field Test Review for the Smith & Wesson M&P R8 BB CO2 Revolver:

Buy this gun in Canada   -   Buy this gun in the US

Make sure to also checkout my Field Test Review of the Umarex S&W M&P R8 for the real world performance results!

Type: BB air pistol.
Manufacturer: UmarexUSA.
Model: Smith & Wesson M&P R8. Buy in CAN  -  Buy in US
Materials: Plastic (polymer) and some metal construction.
Weight: 1.37 pounds.
Barrel: 5.1 (6.5) inches, metal smooth bore.
Propulsion: 12 gram CO2 x 1.
Action: Repeater, single and double action.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 8 shot rotary magazine.
FPS: 420.
Trigger Pull: The trigger pull on the Umarex Smith & Wesson M&P R8 is not too bad but has a stickiness to it right at the beginning as the cylinder rotates and pushes the metal spring "feed ramp"in and out. Shooting this revolver pre-cocked in single action mode is a bit smoother but also has some resistance right at the beginning. Overall I would say it has a medium pull to it. UPDATE: When actually shooting this gun, the trigger felt very respectable and I was able to get excellent accuracy result shooting in both single and double action.

Accuracy: Very good! I got 6 out of 8 shots inside my 1.5 inch bullseye and only two shots went outside a bit. these results where done shooting from 20 feet out in a semi-rested position. I also shot freehand in double action shooting quickly and also got a fairly well placed grouping. When it came to FPS performance the Umarex S&W M&P R8 was a bit disappointing (336 fps average 8 shots) but on the plus side it got well over 150 shots per CO2 and was extremely quite to shoot.

Build Quality: This is an almost all external polymer air pistol with some metal components on the inside like the inner barrel, hammer and some other internal framing components. The fit and finish is very good on the S&W M&P R8 and the plastic seems rigid and does not have much flex to it. Overall the R8 has decent weight but I felt another half pound would have helped this gun out.

Realism: The Umarex S&W M&P R8 is a licensed replica of the actual Smith & Wesson M&P R8 revolver. It is a very close looking copy in almost every way. There is a lot of attention to detail that helps make this gun very believable like the Smith and Wesson markings throughout the airgun and full size swing out cylinder!
Provided by: ReplicaAirguns.com

Pros:

• I don't know the shooting side of things just yet but here's what I can tell you so far.
• Should have decent FPS and good CO2 usage.
• Inexpensive but decent build quality.
• I like that the cylinder is full size and looks real.
• Adjustable rear sight.
• Well hidden CO2 tab.
• Full S&W licensing, very good replica.
• Single and double action trigger.
• Magazine is removable for easy loading and you can get extras.
• Easy to add accessories to it and make it customized to your liking.

Cons:

• The plastic exterior may put off some customers looking for a more metal gun.
• Lighter weight makes it feel a bit cheap.
• Trigger action is a bit sticky at the beginning.
• I would have liked to see this one in a pellet shooter.

Comments:
The Umarex Smith & Wesson M&P R8 BB CO2 Revolver based on my first impressions in this table top review portion is a rather nice low cost CO2 revolver. Other than it's low cost, it has a lot going for it like the extensive Smith & Wesson trademarks and the full size swing out 8 round cylinder, just like its hard hitting 357 big brother. The S&W M&P R8 also has an adjustable rear sight and full single and double action trigger for fast paced shooting or slowed down precision. I also really like the well hidden CO2 tab and larger diameter barrel opening that add to the realism of this Air pistol. Yes it shoots BB's only, and yes it is mostly plastic but I think once you start shooting this gun you will quickly forget these two minor shortcomings and remember how little all this enjoyment cost you!

My YouTube Table Top Review for the Smith & Wesson M&P R8 BB CO2 Revolver:

Buy this gun in Canada   -   Buy this gun in the US

OK we are one step closer to having stock on some Airsoft guns. I have 4 new full-auto rifles for you to choose from in our Canada and US Replica Airguns Stores. In the US Replica Airguns Store they are in stock and ready to sell but we have to wait just a bit for them here in the Canada Replica Airguns Store so I am giving the Canadian version a bit of a pre-sale price reduction to give you some incentive!

The Canadian versions are all high velocity and shoot in the 450 fps range to allow us to sell them to you here in Canada in the "non-clear" solid metal and polymer versions since they will be classified as "non-regulated firearms" just like a regular airgun.

And yes I will be reviewing these Airsoft rifles for you, hopefully all of them :)

King Arms Colt M4A1 Metal AEG Airsoft Rifle

FN Herstal F2000 Tactical AEG Airsoft Rifle

Kalashnikov AK74 SU AEG Airsoft Rifle

AK47 Kalashnikov Tactical 60th Anniversary AEG Airsoft Rifle
 

Buy these Airsoft guns in Canada   -   Buy these Airsoft guns in the US

As you know I have been doing some reviews of my 22LR "Real Steel" guns and I added a couple more to the collection I want to share with you all. From my past experience, airguners also like the low cost 22LR guns for a variety of reasons including reduced operating cost, low recoil, lots of places to shoot them and so on...

Today I bring to you a quick preview of my ISSC M22 Glock Copy in 22LR and also my Chiappa 1911-22 1911 22LR Copy. You may also remember the review I did a while back of the ISSC MK22 SCAR styled 22LR.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

I took both these guns to the gun range and put several hundred rounds through them and by the end they where both shooting very reliable using inexpensive box Blazer 22LR ammo. I stuck with this ammo because it seemed to be working well. The Chiappa 1911-22 was a bit pickier at first but I think it was mainly to do with a rather stiff magazine spring, making it difficult for the first couple rounds to chamber, again most of this sorted itself out by the end of the shooting day.

My ISSC M22 really performed well, the slide was a bit tight at first creating a few failures to chamber and eject but after a few magazines it settled right down and would hammer through all 10 rounds with no problems. I am really loving this little 22LR Glock replica!

Stay tuned for my full reviews on both of these guns and enjoy my Vimeo preview video for now!

If you have not already read my Table Top review for the WE SCAR-L, then make sure to check it out for specifications and an overall review of this very nice Blowback Airsoft rifle.

This Field Test review kind of baffled me, I was surprised with almost everything about it. Initially when I got my WE SCAR, I tested it out with one of my CO2 mags and got some pretty decent results not only in FPS performance but also in the accuracy department, I got around 400+fps and a nice 2 inch group from 30 feet out in a semi-rested position.

So when I headed out to record my Field Test, I was expecting some decent results! I'm not going to say this gun let me down but it did perform radically different for me on this day then the previous day and the only real difference is that I did a complete filed strip, clean and lube of the Airsoft rifle which in my opinion should of improved things but I guess not?

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

The most surprising realization I had was that with CO2 (as compared to the Propane), I did notice a heavier blowback and faster rate of fire in full auto but for some reason I had less velocity by almost 100fps when compared to using my Propane magazine? And my accuracy suffered also by an amazing amount. Some rounds had trouble even getting on the paper?

I will revisit this rifle in the summer, I think I will strip it down and wipe it down and perhaps redo this test entirely! I still love this Airsoft blowback rifle for so many reasons but on this day at least it came up a bit short for me.

My Vimeo Video Field Test Review for the WE AWSS SCAR-L - SCAR Type Rifle:

Buy Airsoft rifles in Canada

Buy Airsoft rifles in the US

Make sure to also watch my Field Test Review for the WE SCAR-L!

Type: Airsoft.

Manufacturer:WE.

Model:AWSS SCAR-L Generation 3 Closed Bolt (Tan).

Materials: Metal & Polymer.

Weight: 6.9 pounds.

Barrel: 11.5 inches, metal.

Propulsion: Green-gas - propane - CO2

Action: Semi/full auto, single action.

Ammunition Type: 6mm Plastic BB.

Ammunition Capacity: 30 round magazine.

FPS: 450.

Trigger Pull: The trigger pull on the WE SCAR is very short and light. You can shoot this gun very quickly, that is after you recover from the very heavy blowback action you can really feel in your shoulder.

Accuracy: I thought I would test this Airsoft rifle just like I do my other BB guns, why put it in a class by it's self? So I put about 10 rounds into a target from 30 feet out using a semi rested position (sand bag in the front - standing in the rear). I was using a non magnified red dot so there was going to be some variance on the target from that range no doubt. When I walked up to the paper I was rather stunned as this Airsoft rifle shooting .25 gram plastic BB's got a 2 inch 10 round grouping! This makes for an awesome plinker - Airsoft or not!

Build Quality: The WE AWSS SCAR is very well made with a full CNC Aluminum Upper, all steel internals and very high quality polymer lower receiver and folding stock. As far as I could tell all the external mechanical parts are also metal including the trigger, selector switch magazine release, bolt catch release, charging handle. all accessory rails and sights and anything else I missed! The Magazine is also metal.

Realism: One thing about most Airsoft guns is the attention to realism and in this area they generally have the edge over their 4.5mm Steel BB shooting brothers. This WE SCAR copy is 100% true in design and even field strips exactly like the real NATO round firing version. It even has the true marking indicating "MK 16MOD O and CAL. 5.56 MM." on the upper receiver. Like the real SCAR, everything functions the same including the semi auto and full auto selector switch :)

Purchased From: Private sale.

Pros:

• Amazing attention to detail.

• All CNC aluminium upper.

• All metal internals and metal external mechanical parts.

• Semi auto & full auto selectable.

• Awesome blowback kick really hits you in the shoulder.

• Field strips just like the real steal.

• Nice high 400+ FPS even with .25 gram BB's

• Extremely accurate for plastic BB's.

• Full ambidextrous, even the charging handle can be switch side to side.

• Can use propane or CO2 with the appropriate magazine.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Not cheap to buy in Canada.

• Eats CO2 pretty quickly.

• Because of heavy blowback, you need to check wear and tear on the parts often.

• May be too powerful for skirmishes without some detuning.

Comments:

This is really my first Airsoft review and for the most part my first real serious Airsoft gun. I do have a Crosman M50 (UZI copy) that I bought a while back and I will review it also but it was one of those Canadian see through guns that look like kids toys :( Getting back to the WE AWSS SCAR-L... I just love the design of this type of rifle, I even bought the almost exact same gun in a .22 rimefire - the ISSC MK22 SCAR, check that review out if you have are looking for  a .22LR gun. Again getting back to the WE AWSS SCAR-L!! It's got so much going for it. Quality, realism, performance, made by a reputable Airsoft company and as far as GBB Airsoft guns go it is well priced!

For those that like to skirmish or use these in Airsoft war games, they may want to go with the AEG (Automatic Electric Gun) version because they require less reloading and have more sustained FPS. But for me since I don't really do any Airsoft war games, well at least not yet? I kind of like the realism of the blowback with its kick and more realistic magazine capacities. Since I go after the most realistic guns I can get, this Airsoft rifle really speaks to me and just because it shoots a plastic BB rather then a metal BB, I really can't say it makes to much difference for what I'm shooting at anyways. I point it at stuff and the stuff gets knocked down and generally with the same hole in it my 4.5mm BB's would have made. Look forward to more Airsoft reviews in the future...

My Vimeo Video Review for the WE AWSS SCAR-L - SCAR Type Rifle:

Buy Airsoft rifles in Canada   -   Buy Airsoft rifles in the US

Click here to check out my Field Test for the Baikal Drozd Blackbird

Type: BB Machine gun.

Manufacturer:Baikal.

Model:Blackbird IZH MP-661K.

Materials: Metal & Polymer.

Weight: 4 pounds.

Barrel: 8 inches, metal-rifled.

Propulsion: CO2 or (Bulk air with adaptor).

Action: Electronic trigger with 1-3-6 round burst & 300-340-600 Rounds Per Minute.

Ammunition Type: 4.5mm steel BB's.

Ammunition Capacity: 900 rounds.

FPS: 360-500.

Trigger Pull: The trigger pull on the IZH Drozd Blackbird is nice and light due to the fact that the trigger is not mechanical but is instead an electronic on-off switch that operates a solenoid. The solenoid pulsates in turn hitting the CO2 valve release. This is how the single fire and burst fire rates are achieved, by means of electronics.

Accuracy: The Drozd Blackbird is designed to be a machine gun and so testing it in single shot mode for accuracy is kind of taking it out of its element. Even so it did reasonably well, but when when I flicked it over to full auto it actually seemed to tighten up and start grouping even more centered and closer together considering the vast amount of rounds coming out of the barrel all at once :)

Build Quality: This is a typical Russian made gun, all business and less importance put on looks but even so it is visually appealing, at least to me! Everything works exactly as it should and even though the main shell is made out of plastic, it's really more of a weapons grade polymer so there is no cause for concern here. There are a fair amount of metal components like the factory barrel, much of the magazine and many internal parts. This air gun is very durable!

Realism: The Baikal Drozd Blackbird IZH MP-661K is not a replica, but it does look like a sub machine gun of sorts, I'm really just not sure exactly what it looks like as it kind of has its own look. When you start shooting it, looks just don't seem to matter anymore, all you can think about is how much damage is happening down range.

Purchased From: The Replica Airguns Store.

Pros:

• Very well made BB machine gun.

• Excellent power.

• Good accuracy in all shooting modes.

• Uses the 12 gram and 88 gram CO2 (Can also convert to bulk air)

• Stock version can shoot up to 600 rounds per minute.

• Rifled barrel.

• Adjustable rear sight for windage and elevation.

• Improved rail sits higher and is longer then the classic Drozd.

• Drastically Improved magazine capacity (motor hopper system)

• Many mods available for this gun.

• Great for pest control, especially the ones that are on the move.

• 10 out of 10 on the fun factor.

• Made in Russia.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• BB Hopper motor sound is a bit annoying!

• A bit more accuracy in semi auto mode would have been nice.

• On the pricey side.

Comments:

The Baikal Drozd Blackbird IZH MP-661K takes all the fun you get with the Classic Drozd and gives you even more fun. It may be one of the more pricy BB machine guns on the market but it is well worth the extra cost to get such a quality product that not only is great out of the box but can also be modified in so many ways to improve its performance and looks dramatically. If you are looking for the absolute top player in the BB Machine gun category then the Drozd Blackbird is the top contender with its excellent build quality and performance along with the nearly unlimited modifications available to make the Blackbird perform up to anyones standards.

My Vimeo Video Review for this Russian made Blackbird BB Machine gun:

Buy this gun in Canada   -   Buy this gun in the US

Click here to check out my Table Top Review for the Baikal Drozd Blackbird

I'm kind of doing this one backwards this time around. I was going to do the table top review of the Baikal Drozd Blackbird first but the weather was just too nice to pass up today to not get outside and give this gun a thorough testing.

I will be posting the table top review in a few days with all the specification (Here it is now) but if you're looking for some basic info on the Blackbird you can checkout our online store where you can find some statistics on the Drozd Blackbird and you can also checkout my Drozd Classic Review where I do a short comparison between the Drozd Classic and the newer updated Blackbird version.

I had a lot of fun shooting this gun, it lays down a lot of steel in a very short amount of time and has a virtually endless 900 round BB hopper that just keeps on going. During my testing I shot close to 400 rounds or more using one 88 gram CO2 cartridge and even near the end the Baikal Drozd Blackbird had pretty good feet per second performance.

My Baikal Blackbird does have some upgrades: (JimC Barrel, Full Auto-High RPM Mod Chip, Added Accessory Rails, Red Dot Scope, Tactical Light, Laser and Bulk Air kit) but the stock version is "almost" as fun :)

Enjoy this Vimeo video, it was crazy fun to make!

Buy this gun in Canada   -   Buy this gun in the US

First off, make sure to checkout my Table Top Review for the Crosman NightStalker for all the specifications and details on it.

In this Filed Test Review of the Crosman NightStalker .177 caliber pellet shooting air rifle I shoot 5 rounds through the Chronograph to get a real world average FPS of this detuned Canadian version. As expected the CX4 Storm replica does not get anywhere close the 580 FPS the non-regulated version claims to get and even with fairly light 6.9 grain pellets I got an average of just over 400 FPS, also keep in mind I have re-tuned this air rifle a bit to get somewhat higher Feet Per Second performance then the stock Canadian version even if it's not a lot.

Unlike the Umarex Beretta CX4 Storm I also Field Tested, the Crosman CX4 replica air rifle was not so reliable for me when it came to operation, I had several misfires and failures to load which was not what I was expecting since I had shot this gun many times before with very different results. The Crosman NightStalker uses a rotary magazine system which in theory should work pretty well but maybe due to my pellet choice this time around I found the NightStalker almost painful to shoot and I'm not sure why it was acting up so much for me?

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

During my Accuracy Test using a the Red Dot Scope from 30 feet out in a semi-rested position, I got pretty good results which was a bit of a relief, right around a one inch 12 round grouping. Again this airgun is made for fun and if all was working well I should have been able to empty the 12 round magazine fast and precise but not today. I would not recommend the Night Stalker for any type of small pest control because it is a bit underpowered, but for target practice and plinking it is well suited

As far as recommending this gun, I think if you can get your hands on a used one you should fair pretty well as long as yours does not act up like mine was on this day and time. If you can find the higher FPS version then it would be a nice upgrade to the one I was testing. The original price point for the Crosman NightStalker was not expensive so don't pay too much if you do plan on getting one and expect to play around with pellet choice till you find one it likes best.

My Vimeo Video Table Top Review of the Crosman NightStalker Pellet Rifle:

Buy Air Rifles in Canada   -   Buy Air Rifles in the US

First off, make sure to checkout my Table Top Review for the Umarex Beretta CX4 Storm for all the specifications and details on it.

In this Field Test Review of the Beretta CX4 Storm .177 caliber pellet shooting air rifle I shoot 5 rounds through the Chronograph to get a real world average FPS of this detuned Canadian version. As expected the Beretta CX4 Storm does not get anywhere close the 600 FPS the non-regulated version claims to get and even with fairly light 6.9 grain pellets I got an average of just under 400 FPS, perhaps a little too aggressive with the Canadian regulating of the CO2. I would have liked to have seen much better Feet Per Second performance from the pellet shooting Umarex CX4 Storm.

On the other hand this CX4 replica air rifle was incredibly reliable when it came to operation, I did not have even one misfire or failure to load a round even with the rather unusual 30 round belt-fed magazine, which one might think would be prone to problems. The Umarex Beretta CX4 Storm has a very snappy feel with its blowback operation that gives you a confident feeling when shooting and the 8 pound trigger seems to actually lighten up the faster you shot it :)

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

During my Accuracy Test using a magnified scope from 30 feet out in a semi-rested position, I got pretty decent results but nothing amazing, just over a one inch 12 round grouping. Again this airgun is made for fun and you can really empty the 30 round magazine fast and with good precision. I would not recommend it for any type of small pest control because it is a bit underpowered but for target practice and plinking it works very well.

As far as recommending this gun, I think it is very well made and it performs excellent, if you can get your hands on the higher FPS version then it would be a nice upgrade to the one I was testing. The price may be a tad high but it really is a very good quality air rifle overall.

My Vimeo Video Table Top Review of the Umarex Beretta CX4 Storm Pellet Rifle:

Buy Air Rifles in Canada   -   Buy this Air Rifle in the US

Type: Pellet air rifles.

Manufacturer:Umarex & Crosman

Model:Beretta CX4 Storm & Night Stalker

Materials: Metal & plastic.

Weight: 5.25 / 3.27 Pounds.

Barrel: 17.5 / 16.75 inches, metal-rifled.

Propulsion: CO2 88 gram.

Action: Semi auto - Blowback.

Ammunition Type: .177 caliber pellets.

Ammunition Capacity: 30 / 12 rounds.

FPS: Up to 500 fps (Canadian detuned versions).

Trigger Pull: The trigger pull on the Umarex Beretta CX4 Storm and the Crosman Night Stalker are both pretty decent and weigh in at 8.5 pounds for the Beretta CX4 and 7 pounds for the NightStalker. This is a bit surprising since the Umarex Beretta trigger only releases the action while the Crosman NightStalker has to rotate the 12 shot magazine with each trigger pull.

Accuracy: This is still to be determines in a later field test review but from my past shooting experiences with both these guns I found them to be pretty good and even though the Crosman NightStalker is a far cheaper built and priced gun then the Umarex CX4 Storm, I think it may have the edge on the German made counterpart.

Update:

• Checkout my Umarex Beretta CX4 Storm Field Test Review

• Checkout my Crosman NightStalker Field Test Review

Build Quality: Both of these Beretta CX4 Storm looking guns have plastic shells with internal metal parts but they are night and day when comparing the build quality. Don't get me wrong, the night Stalker is not a badly built rifle but when sitting side by side with the Umarex CX4 Storm, you can really see the extra quality that went in to the German made Umarex version. It has much heavier and thicker materials and the fit and finish is excellent, pretty much what you would expect to see on the real Beretta CX4 Storm.

Realism: The Umarex Beretta CX4 Storm is obviously a replica of the real steel Beretta CX4 Storm and it really is an excellent replica in almost every way with the excepetion of the screw holes one side. The pellet shooting version even includes the hard shell case that looks to be the same one the real CX4 comes with. So what about the NightStalker? The Crosman NightStalker is a look-a-like for the replica Beretta CX4 Storm but not really a replica. It still looks very good and makes for a a decent rifle if your looking for something that has that CX4 Storm look and feel.

Purchased From: Private Sale.

Pros for Umarex Beretta CX4 Storm:

• Very well made - made in Germany.

• Almost perfect replica with lots of detail.

• Comes in a nice hard-shell case.

• Adjustable sights for windage and elevation.

• Has built in picatinny top rail.

• Large capacity 30 rounds belt-fed pistol grip loading magazine just like the real CX4 Storm.

• True Blowback operation.

• Lots of shots per 88 gram CO2.

Pros for Crosman NightStalker:

• Made in the USA.

• Inexpensive yet a very respectable shooter.

• Adjustable sights for windage and elevation.

• Can mount rails for sights and add on accessories.

• Decent capacity 12 round rotary magazine.

• Lots of shots per 88 gram CO2.

Cons for Umarex Beretta CX4 Storm:

• A bit on the expensive side!

• Canadian detuned version is very underpowered.

• Trigger pull is a bit hard for a true blowback gun.

Cons for Crosman NightStalker:

• Kind of simple and basic in design!

• Canadian detuned version is very underpowered.

• Would have been nice if it came with a top rail of remounting a scope.

• 12 shot magazine a bit tricky to load till you get used to it.

Comments:

I don't do a lot of rifle reviews as there seems to be a lot less replica air rifles when compared to the vast amounts of replica air pistols available. So it's kind of nice to have these two air rifles that I can show you. Of course if money was no object, then I would recommend the Umarex Beretta CX4 Storm over the Crosman NightStalker especially since the NightStalker does not seem to be in production anymore - kind of a shame since it is really a very respectable multi-shot blowback air rifle for the money. Neither one of these air rifles are made for hunting but I suppose if you have the non-Canadian version that have not been detuned then they may have enough power for small pests. Either way these guns are meant for fun times, and they are fun to shoot rapid fire on targets so if you want a very believable CX4 Storm for a lot less money then the real steel version not only to buy but shoot, then look no further...

Buy Air Rifles in Canada 

Buy Air Rifles in the US