Beginning Saturday Jun 30th and ending Monday July 2nd we are having a Replica Airguns Canada Day Sale on airsoft guns, ammo, gear, and accessories. This is only in our Canada Replica Airguns Store!
Some more Airguns to show everyone! Today I have three very different styles for you... In this Preview video I show off a Multi-pump Pellet Target Pistol, a CO2 Blowback Airsoft Pistol and an AEG AK47 Kalashnikov with all the bells and whistles!
First off is the Strike Point Multi-pump .22 Caliber Target Pellet Pistol from Umarex. It's kind of like the Crosman 1322 Pistol but with more plastic parts on the outside so it's a little bit more bulky than the Crosman. Other than that both Multi-pump Target Air Pistols share similar bolt actions, cross bolt safeties and adjustable rear sights. With 10 pumps you shoudl get around 465 fps form a standard .22 caliber lead pellet so the Umarex Strike Point Multi-pump .22 Caliber Target Pellet Pistol should even be OK for small pest control as long as it proves to be accurate.
I previously reviewed the KWC M40 in it's standard barrel length, the KWC M&P 40 Extended Barrel Airsoft Pistol is pretty much the same Airsoft pistol but with an extended slide and barrel along with higher sights and a vented slide. I also like the stainless steel barrel which give the KWC M&P 40 Extended Barrel Airsoft Pistol a nice tow tone look.
Lastly I take a look at a full featured AEG Kalashnikov Tactical AK47 Airsoft Rifle that comes with everything you are going to need including the battery, charger, two 550 round magazines and an included fore-grip. The AK47 Kalashnikov Tactical 60Th Ann. Airsoft Rifle feels really good in the hands with its near 7 pounds of weight. I look forward to giving this AEG Airsoft rifle a test run for sure!
We often think that something that is more expensive and perhaps built with what we consider to be better materials is going to be the best option. That's not always the case! In this Vimeo Video I talk about some of the Pros and Cons to buying a Plastic Airgun versus a Metal Airgun. Of course this applies to BB, Airsoft and Pellet shooters.
Price
In most cases a Plastic Airgun is going to be less expensive, so if you have limited funds then your only option may be a Plastic Airgun and at the end of the day both airguns are going to probably get the job done much the same.
Realism
Generally speaking, most Metal Airguns are going to have more moving parts, often times with working slides and even blowback operation. This is not always the case but even a Metal Airgun that has few working parts will still feel more realistic simply because of the additional weight to the Airgun. Metal has that cold hard feel to it that makes you feel like you're holing something of substance. Plastic Airguns on the other hand can feel light and cheap and usually are very simple in design with less working parts.
Shooting an Airgun with blowback operation simulates the recoil action and in many cases allows for true single action operation of the trigger and hammer. This is going to feel a lot more realistic than shooting a non-blowback Airgun which again is generally what you get with Plastic Airguns.
Durability
Most people assume that because an Airgun is Meta, it is going to be stronger and more durable. This would be true if the Metal used in the Airgun was actually hardened steel but with almost Metal Airguns, they are made using a zinc alloy metal (Pot Metal) that is much softer then hardened steel and can wear and break a lot easier. When you also consider a Metal Airgun is going to be a lot heavier than a Plastic Airgun, a drop onto a hard surface will have a lot more impact which can cause breakage a to a heavy Metal Airgun versus a Plastic light weight Airgun.
Plastic surfaces are also a lot less prone to showing scratches since the Plastic material will usually be black all the way through versus a Metal Airgun that has a painted surface that when scratched hard enough will show through right to the bare metal. You also get wear marks on painted Metal Airguns that will make it look used and older, some people like this look but other do not.
Reliability
Again people are going to assume a Metal Airgun is going to be more reliable simply because it has more metal parts and metal parts are stronger right? Not the case if the parts are made out of zinc alloy. Now some companies will upgrade some high use parts in Airguns to hardened steel but it's hard to know for sure. You can use a magnet to determine what parts are Metal and what parts are hardened steel.
As we mentioned before, Plastic Airguns are generally pretty simple in design, less working parts means less to go wrong at the end of the day so just because you have a Plastic Airgun it doesn't mean it's going to break on you quickly. Actually it may even outlast your Metal Airgun since all those working parts will eventually wear out.
Now I am the first person to admit that I prefer Metal Airgun over Plastic Airguns, I don't mind spending the extra money for more realism and I'm willing to accept the fact that it's not going to last forever but the fact remains, a Plastic Airgun does have some advantages going for it so don't rule them out completely.
This John Wayne Lil Duke Giveaway didn't go exactly as planned as we had that YouTube Airgun Channel scare shortly after the original announcement so not as many people knew about it but we said we where going to giveaway two John Wayne Lil Duke BB Rifles and so that's what we are going to do!
Make sure to watch my Youtube video and find out if you won or not and congratulations to the two winners! For those that did not win this time around, you can still get yourself a John Wayne Lil Duke BB Gun by heading over to our Replica Airguns Canada or Replica Airguns US online web store and purchasing one the conventional way!
This year at SHOT Show 2018 I had the please to interview Bob from ASG yet again, Bob always has a ton of info to share about ASG new products so make sure to watch this video as it has a lot of info!
To summarize what Bob shared, ASG has their line of CZ P-09 and SP-01 Shadow Steel BB and Airsoft Full Blowback pistols with full size drop out metal magazines. And you'll be happy to know the Canadian CZ P-09 Airsoft version not only will have a threaded barrel but it will come with both a black and red barrel tip cover.
Another new air pistol from ASG is the Dan Wesson licensed none blowback pellet firing 1911, similar to what Crosman is offering that utilizes a full size drop out metal magazine combined with a two sided 6 shot rotary magazine that flips 180 degrees for a total of 12 shots per .177 caliber pellet load. the ASG Dan Wesson Pellet shooting 1911 has a nice heavy weight to it's metal slide and frame design.
Lastly Bob shared with us a new ASG ICS Hera Arms CQR Airsoft Rifle, this ASG Airsoft Rifle is still in the design and production state but look forward to it later on this year!
In this second video showcasing the Bullpup design I test out the Umarex IWI Tavor 21 Elite AEG Airsoft Rifle and put it through my indoor Sea Can Airgun shooting velocity and accuracy test. In this Bullpup AEG Airsoft gun series I also showcase some other Bullpup styled Airsoft guns: The Cybergun Famas AEG Airsoft Rifle and two AEG Bullpups from ASG, the Steyr Aug A2 and Steyr Aug A3 Proline Series.
Getting back to the Umarex IWI Tavor 21 Elite AEG Airsoft Rifle, how did it perform? I placed 5 rounds through my Chrony Chronograph using .20 gram plastic Airsoft BB's and it shot a pretty quick 425 fps! Not sure if I would want to use the Umarex IWI Tavor 21 Elite AEG Airsoft Rifle in any close quarters games with that velocity but it would perform well on a field and even get a round out to a nice distance.
Next I tested out the accuracy of the Umarex IWI Tavor 21 Elite AEG Airsoft Rifle as best I could in my kind of "cramped for rifles" indoor Sea Can Airguns Range. I place my paper target 30 feet down range and put 10 rounds in semi auto into the target shooting from a rested seated position with a sandbag up front for stability. The Umarex IWI Tavor 21 Elite AEG Airsoft Rifle shot a nice tight 1.5 inch grouping just a tad low and to the left but pretty close to the bulls-eye for being straight out of the box with no adjustments on my part.
In full auto mode the Umarex IWI Tavor 21 Elite AEG Airsoft Rifle performedas expected emptying the magazine making a clean 3 inch hole in my paper target with only a few of the 6mm Airsoft BB's venturing outside of it.
All in all the Umarex IWI Tavor 21 Elite AEG Airsoft Rifle is a nice performer with a good solid build quality and modern Bull-pup design. I really liked the pop-up sights and the fact that can use any standard AEG AR/M4 High capacity magazine with it.
In this yet another AEG Airsoft Field Test Shooting Video Review I mainly focus on the Cybergun Famas AEG Bullpup Airsoft Rifle and put it through my typical velocity and accuracy tests I conduct in the Replica Airguns Indoor Sea Can Shooting Range. I also show some other similar Bullpup styled AEG Airsoft Rifles in comparison that I plan on also reviewing very soon, the IWI Tavor 21 Elite Force and two AEG Bullpups from ASG, the Steyr Aug A2 and Steyr Aug A3 Proline Series..
So how did the Cybergun Famas AEG Bullpup Airsoft Rifle perform? I placed 5 rounds through my Chrony Chronograph using .20 gram plastic Airsoft BB's and I got right around a 360 fps average which is should be just about right for most indoor or outdoor shooting environments. Velocity consistency was also good.
Moving on to the accuracy portion of my indoor sea can field test, I place my paper target 30 feet down range and put 10 rounds into the target shooting from a rested seated position with a sandbag up front for stability. The Cybergun Famas AEG Bullpup Airsoft Rifle shot a nice 1.5 to 2 inch grouping just a little high but well centered. The front and back sigh are both adjustable making windage and elevation corrections very easy to do. You could also play around with the hop-up to adjust elevation at various ranges.
In full auto mode the Cybergun Famas AEG Bullpup Airsoft Rifle performed really well, I pretty much empty the magazine and the grouping only spread out to about 3 inches making a clean 3 inch hole in my paper target. There is something very gratifying about unloading an entree magazine in full auto and checking out the damage it caused :)
All in all the Cybergun Famas AEG Bullpup Airsoft Rifle is a great performer at a pretty low price tag of around $200 Canadian at the time of this review. If you want a slightly higher quality version than also checkout the Cybergun Famas F1 EVO Version which is only about $90 more and but offers better build material and and internals improvements.
You can also buy the Cybergun Famas AEG Airsoft Rifle in our US Replica Airguns Store!
In this Field Test Shooting Video Review I mainly focus on the ASG CAA M4 Sportline AEG Airsoft Rifle and put it through my typical velocity and accuracy tests I conduct in the Replica Airguns Sea Can Shooting Range. I do compare the ASG CAA M4 Proline AEG Airsoft Rifle to the ASG CAA M4 Sportline version since they look virtually identical but do have some notable differences, like the build materials and much lower cost for the ASG CAA M4 Sportline AEG Airsoft Rifle. That said both ASG CAA M4 AEG Airsoft Rifles did perform very similarly other than a bit of a velocity bump with the ASG CAA M4 Proline model over the Sportline I test in this video.
So how did the ASG CAA M4 Sportline AEG Airsoft Rifle perform? I placed 5 rounds through my Chrony Chronograph using .20 gram plastic Airsoft BB's and I got a 335 average fps which is a bit lower than the ASG CAA M4 Proline AEG Airsoft Rifle but still great for a variety of Airsoft shooting situations. I did notice that the FPS seemed to be creeping up slowly as I tested it, maybe some break in was taking place?
Moving on to the accuracy portion of my indoor field test, I place my paper target 30 feet down range and put 10 rounds into the target shooting from a rested seated position with a sandbag up front. The ASG CAA M4 Sportline AEG Airsoft Rifle shot a nice 1.5 to 2 inch grouping a little to the right of the bulls-eye and slightly low, which I can easily correct using the adjustable sights and hop-up adjustments. I like to conduct my field tests with all the guns right out of the box and with no adjustments prior to my testing since that's the way you're going to get them and you may have to also make some small correction to the sights and or hop-up adjustments.
In full auto mode the ASG CAA M4 Sportline AEG Airsoft Rifle didn't miss a beat. I emptied what was left of the mag (About 130 rounds or so) in no time with a few quick bursts making a nice mess of the paper target which is the result I'm looking for in full auto mode :)
All in all the ASG CAA M4 Sportline AEG Airsoft Rifle is a decent quality Airsoft gun at an affordable price-tag. If you're budget is a higher than checkout my previous Field Test Shooting Video of the higher end ASG CAA M4 Proline AEG Airsoft Rifle.
In this Field Test Shooting Video Review I mainly focus on the ASG CAA M4 Proline AEG Airsoft Rifle and put it through my typical velocity and accuracy tests I conduct in the Replica Airguns Sea Can Shooting Range. I do compare the ASG CAA M4 Proline AEG Airsoft Rifle to the ASG CAA M4 Sportline version since they look virtually identical but do have some notable differences, like the build materials and perhaps a few internal upgrades found in the Proline version. That said both ASG CAA M4 AEG Airsoft Rifles did perform rather similarly other than a bit of a velocity bump with the ASG CAA M4 Proline model.
So how did the ASG CAA M4 Proline AEG Airsoft Rifle perform? I placed 5 rounds through my Chrony Chronograph using .20 gram plastic Airsoft BB's and I got a very respectable 392 average fps with most of the five shots actually getting 392 fps so very consistent velocity for sure.
Moving on to the accuracy portion of my indoor field test, I place my paper target 30 feet down range and put 10 rounds into the target shooting from a rested seated position with a sandbag up front. The ASG CAA M4 Proline AEG Airsoft Rifle shot a tight 1.5 inch grouping just to the right of the bullseye which I can easily correct using the adjustable sights. I like to conduct my field tests with all the guns right out of the box and with no adjustments prior to my testing since that's the way you're going to get them and you may have to also make some small correction to the sights and or hop-up adjustments.
In full auto mode the ASG CAA M4 Proline AEG Airsoft Rifle didn't miss a beat. I emptied what was left of the mag (About 200 rounds or so) in no time at all and made a nice mess of the paper target which is what I am usually going for :)
All in all the ASG CAA M4 Proline AEG Airsoft Rifle is a very high quality Airsoft gun but does come at a premium pricetag. If you're budget is a bit lower than checkout my upcoming Field Test Shooting Video of the more economical ASG CAA M4 Sportily AEG Airsoft Rifle which will be out this week.
Type: Airsoft AR, M4, M16 Styled Rifle.
Manufacturer: G&G.
Model: ARP-556 and ARP-9.
Materials: Metal and plastic/polymer construction.
Weight: (ARP-9 4.4 pounds) (ARP-556 5.3 pounds).
Barrel: 6 inches, metal non-rifled.
Propulsion: AEG non-blowback.
Action: Semi & full auto SAO.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: (ARP-9 300) (ARP-556 450).
FPS: 400+.
Trigger Pull: The trigger pull on the G&G ARP rifles is an electric mechanical trigger that simulates a single action only trigger. There is essentially a light spring internally which supplies the trigger pressure. Pressure is even and smooth.
Accuracy: I have already made my Field Test Shooting Video Review for the G&G ARP-556 and ARP-9 AEG Airsoft CQB Rifles so make sure to watch that video for the results. Both G&G AEG Airsoft Rifles share similar internal components so I expect them to both shoot about the same in terms of power and accuracy. My testing of the G&G ARP-556 AEG Airsoft CQB found an average fps of about 400 using .20 gram plastic Airsoft BB's. Shooting at my paper target 30 feet down range, pretty much every shot hit the 1.5 inch bulls eye!
Build Quality: As with all of the G&G product line the G&G ARP-556 and ARP-9 AEG Airsoft CQB Rifles are really well made. Fit and finish is flawless and I had no issues shooting these guns at all. Every engagement of the trigger resulted in an Airsoft BB downrange and in full auto mode BB's where literally streaming from the barrel :) You will find a little more metal specifically in the receiver for the G&G ARP-556 over the G&G ARP-9 AEG Airsoft CQB Rifle which does make the ARP-556 a little bit heavier but not by much.
Realism: Both the G&G ARP-556 and ARP-9 AEG Airsoft CQB Rifles are super realistic, they are based on the AR, M4, M16 Rifle design but are scaled down for tactical close quarters use with their compact barrels and adjustable stocks. Most parts work as you would find on a real steel M4 like the charging handle, dust cover, simulated forward assist and of course the magazine releases. There is however no blowback operation but I can attest that if you have an 11.2 volt battery and are shooting in full auto you will feel this gun a rock'n.
Purchased From: The Replica Airguns Store.
Pros:
2 lower and higher priced models with similar looks and performance to choose from.
Super compact CQB rifles.
Fully adjustable pop-up iron sights front and back.
Crown flash hider acts as a sound amplifier if you’re into that sort of thing?
Great internals, Internally upgraded with an ETU and MOSFET system.
Skeltonized PDW stock perfect for close quarters combat.
Nice 400 feet per second velocity, good for close and even further out ranges.
Very accurate, one of the best Airsoft rifles tested to date.
ARP-526 has an ambidextrous selector / safety switch.
ARP-556 has full metal receiver.
ARP-9 is a bit lighter and less tiring to carry, great if you plan to add on a bunch of accessories.
Cons:
No blowback operation.
ARP-9 has a plastic receiver.
You need some pretty compact batteries to fit into the short bumper tube.
Comments:
I am going to go on the record and say that the G&G ARP-556 and ARP-9 AEG Airsoft CQB Rifles would be my go to Airsoft battle rifle of choice. They have enough power for out door shooting and not too much for indoor shooting. Their compact and lightweight design will make them super easy to carry around all day and quick to place on any target in a hurry. Accuracy is not a concern since these AEG Airsoft Rifles can cut a bullseye out of a paper target no problem. Price for what you get, quality, looks. performance are all top notch with either choice of G&G ARP-556 or ARP-9 AEG Airsoft CQB Rifle you decide to go with.
My Vimeo Video Review for the G&G ARP-556 and ARP-9 AEG Airsoft CQB Rifles:
It's been a rather long time since I made an Airsoft Rifle Field Shooting Test video. I like to shoot a bit further out than 30 feet when using a rifle. Unfortunately the weather outside is getting really cold where I live so my testing will have to all be done inside the Replica Airguns Sea Can Airgun Range which only allows for about 30 feet worth of distance to my paper target. I figure if I can get a tight group at 30 feet than it shouldn't spread out too much at longer ranges!
Since the G&G ARP-9 and G&G ARP-556 have identical internals and similar barrel lengths I figured I only really needed to test one of them out so I picked the G&G ARP-556 AEG Airsoft CQB and put 5 shots through my Chrony Chronograph to get my Field Test Started. The G&G ARP-556 AEG Airsoft CQB shot a nice consistent 400 fps which is as high as I would want to go for indoor CQB type shooting. The BB's sure did get to my paper target quickly!
I followed my velocity testing with an accuracy test at 30 feet back using a rested shooting position, sand bag up front and sitting in the back. I first placed 10 rounds on my paper target in semi-auto and hit the 1.5 inch bullseye with every shot! I think this may have been a first for me using an Airsoft rifle? Of course I had to switch the G&G ARP-556 AEG Airsoft CQB over to full auto and see how she would perform. Since I was using an 11.2 volt bolt battery the rate of fire was crazy fast but even so in full-auto the bulk of the shots still hit the center bullseye cutting out a 2 inch hole in my paper target. The G&G ARP-556 AEG Airsoft CQB is a beast that I would not want to be on the receiving end of!
I'm pretty sure I found my go to AEG M4 styled CQB rifle, I'm not sure how you could beat the results I got shooting the G&G ARP-556 AEG Airsoft CQB. And if you're looking for a slightly lighter and less expensive version with the same performance then take a look at the G&G ARP-9 AEG Airsoft CQB.
I just received some really nice G& G Airsoft guns to share with everyone, I have two CQB Styled AEG rifles and a fantastic Gas Blowback Beretta Mod. 92FS.
The AEG CQB AR or M4 styled rifles are similar in a lot of ways and are super compact and really well built. The G&G ARP-9 has a polymer receiver and hand guard while the G&G ARP-556 has a full metal receiver and hand guard. Both have good weight to them. You will also find Skeletonized PDW stocks and large crown flash hiders on both models along with M-LOK hand guards. Inside you will find upgraded ETU and MOSFET electronics.
Obvious difference are the 9mm style magazine found on the G&G ARP-9 versus the M4 styled high capacity magazine on the G&G ARP-556. You also get an ambidextrous safety sector switch on the G&G ARP-556.
Next I show off the G&G GPM92 Beretta Mod. 92FS Gas Blowback Airsoft Pistol. It comes in a high quality hard plastic case with a well made speed loader. If you place the magazine in the gun you will have room for two magazine in the hard shell case. The G&G GPM92 hold 27 roads in it's double stack magazine that has some interesting new features that help it perform much beet in cold environments and really boost green gas usage. G& G calls them the Whirl Cylinder Valve system and Micro gas filter. Both help eliminate free up in the gun when shooting fast.
The G&G GPM92 Beretta Mod. 92FS is really well made and shoot in double and single action and the safety even works as a decocker. For those looking to add a mock suppressor you will happy to know the G&G GPM92 has a threaded barrel tip.
Type: Multi-pump Pellet-BB rifle.
Manufacturer: Umarex USA.
Model: NXG APX.
Materials: Metal and polymer parts.
Weight: 3.4 pounds (1.54 kg).
Barrel: 20 inches, rifled.
Propulsion: Multi-pump.
Action: Single shot pellets/repeater BB's.
Ammunition Type: .177 caliber pellets & 4.5mm steel BB's.
Ammunition Capacity: 75 BB's in hopper.
FPS: up to 490.
Trigger Pull: The trigger pull on the Umarex NXG APX Multi-pump Pellet-BB Rifle is not too bad, I would not say it's overly light but not on the heavy side either. Essentially it has a single action trigger since you need to pre-charge the bolt to engage the trigger. There is a little bit of take-up and then a fairly noticeable break point where you will feel the most trigger weight right before it releases.
Accuracy: So far I have not performed my Field Test Shooting review for the Umarex NXG APX Multi-pump Pellet-BB Rifle so I do not have any velocity or accuracy information to share at this point. I do plan on making that Shooting video Review this week so stay posted for that one.
Build Quality: The Umarex NXG APX Multi-pump Pellet-BB Rifle is not going to be one of your highest quality airguns but it does get the job done and feels solid enough with all the working parts feeling tight and secure. Most of the Umarex NXG APX Multi-pump Pellet-BB Rifle is plastic, even the bolt and trigger but you will find more metal inside where it counts like the inner steel barrel and the outer steel barrel shroud. The stock is plastic and that's OK, I do like the addition of the rubber butt pad and cheek rest as they work well and help to make the Umarex Umarex NXG APX Multi-pump Pellet-BB Rifle feel comfortable to hold in position and shoot.
Realism: Since the Umarex NXG APX Multi-pump Pellet-BB Rifle is not a replica, realism is not really a factor here but it does look like a gun so treat it as if it was a real gun since most people will not know the difference. Always transport and store any airgun safely and discreetly.
Pros:
Low cost air rifle with a lot of features.
Iron sights actually look really usable with the fiber optic red dot up front.
Comes with an 4x15 optical sight which should help with accuracy at longer ranges.
Super easy to pump even when getting close to the 10 pump max.
Built in auto safety.
Stock and cheek rest position feel really good.
Choice of shooting pellets or BB’s.
Trigger feels pretty good, not too heavy.
Mostly an ambidextrous design so good for lefties too.
Has a rifled barrel.
Overall a good looking air rifle.
Cons:
Mostly plastic, not the highest quality build.
Included 4x15 scope is super low budget but will work till you can upgrade it down the road.
Comments:
I really hope the Umarex NXG APX Multi-pump Pellet-BB Rifle shoots well as it is kind of a cool air rifle with a lot of features at a low price tag and would make a great little target and maybe even small pest air rifle if it turns out to be accurate and hit that near 500 fps mark with pellets. The Umarex NXG APX Multi-pump Pellet-BB Rifle is not going to win any quality or design awards but from a usability stand point it works well and feels good to hold and shoot, the rear stock and cheek rest are in a perfect piston for me and this is a pretty small airgun overal. Personally I would invest in an upgraded scope, something like the Walther 4x32 would be perfect and not too expensive.
The Umarex NXG APX Multi-pump Pellet-BB Rifle is available in both the Stand Alone Air Rifle and Kit Version that comes with the addition of safety glasses, targets and ammo.
Type: BB Gun/Rifle.
Manufacturer: Umarex USA.
Model: Morph 3X.
Materials: Plastic with some internal metal parts.
Weight: 2.5 pounds (1134 grams).
Barrel: 4.5 inches, metal non-rifled.
Propulsion: 12 gram CO2 x 1.
Action: Semi auto, double action only.
Ammunition Type: 4.5mm BB's.
Ammunition Capacity: 30 round internal magazine.
FPS: 480+.
Trigger Pull: The double action type trigger pull on the Umarex Morph 3X CO2 BB Gun is reasonable, it is a bit on the longer side but is smooth with low friction and has a predictable break point. I found it very easy to shoot this gun with good accuracy shooting out in front as a pistol or rested on the shoulder using the shoulder stock more like a rifle.
Accuracy: The good news is that I have already done my Field Test Shooting video for the Umarex Morph 3X CO2 BB Gun so make sure to check that video review out when you have a moment. I was very impressed with the overall shooting performance of the Umarex Morph 3X CO2 BB Gun, it scored well in both power and accuracy! I was able to get a nice tight 3/4 inch 10 round grouping on my paper target setup 30 feet away and even with this Canadian versions 4.5 max length barrel I was still able to get really close to 500 fps out of the Umarex Morph 3X CO2 BB Gun! I wonder what velocity I would have managed if the extension barrel actually included the inner barrel portion for the full 12 inches of barrel length?
Build Quality: The Umarex Morph 3X CO2 BB Gun coming in at around $100 is a low cost BB gun considering it is so versatile. At this price point you are going to find an almost all plastic build with the exception of some internal metal parts. That said the Umarex Morph 3X CO2 BB Gun feels solid and well made, all the fitted parts feel tight when put together.
Realism: The Umarex Morph 3X CO2 BB Gun is not a replica of any gun that I can point out? It can also morph into so many different variation, Umarex says it has 3x configuration but I counted 8 possible configuration when mixing and matching components.
Available From: The Replica Airguns Store.
Pros:
Under $100 in Canada at the moment of this review.
Super versatile airgun with lots of configurations.
Very powerful CO2 BB gun even in short barrel pistol only mode.
Shooting test showed it had good accuracy, as good as any BB gun I have tested.
Rails top and bottom for accessories.
Fiber optic sights front and back.
Has a Velocity Screw for adjusting fps power.
In Pistol form with the rear stock, it would make a great back pack airgun.
30 round internal magazine for lots of shooting fun without having to reload so often.
Uses 12 gram CO2, cheap and easy to buy.
Cons:
Mostly plastic build.
No inner barrel inside rifle extension so just for show, does not increase velocity.
Rear sight is not adjustable but you have the option to add on a red dot or optical sight to the rail.
Comments:
I was pleasantly surprised with the Umarex Morph 3X CO2 BB Gun, I expected it to be much different from a lot of the other airguns I have reviewed since it is so versatile with all of its configurations. I was not expecting it to be so powerful with only the short 4.5 inch inner barrel. I was again surprised but the accuracy, not many BB guns get a 3/4 inch grouping at 30 feet out! Another kind of cool feature I didn't even know about at first is the ability to adjust the velocity using a screw for higher or lower fps. Lower fps will maximize the amount of shots you get from a 12 gram CO2 while higher fps is just kind of more fun to shoot in. I also don't often recommend BB guns for pest control but in this case with how light weight and easy the Umarex Morph 3X CO2 BB Gun is to break down and put in a backpack, and the fact that it is fairly powerful and accurate out to 300 feet. I feel in a pinch you could take down some small vermin if you found yourself hungry and lost in the woods.
My Table Top and Field Test Videos for the Umarex Morph 3X CO2 BB Gun:
Another revisit for an inexpensive and fun BB shooter, the Crosman Marlin Cowboy BB Rifle! I have done some previous video reviews and comparisons for the Crosman Marlin Cowboy BB Rifle so make sure to check them out. I also recently did an update Field Test Shooting Video for the Daisy Red Ryder BB gun which is a very comparable airgun to the Crosman Marlin Cowboy BB Rifle.
Here is a quick overview of the Crosman Marlin Cowboy BB Rifle, it's designed for younger smaller shooter with it's short stock but it's still fun of all ages! You can store 700 4.5mm Steel BB's in its internal magazine and Crosman claims a max velocity of 350 fps. Like the Daisy Red Ryder the power source is a spring piston that is activated by the lever action.
Now let's talk about how the Crosman Marlin Cowboy BB Rifle performed in my Sea Can Field Test Shooting test... Crosman claims a max fps of 350, my Chronograph results came in at a 5 shot average of 316 fps which is not bad compared to the Daisy Red Ryder that also has a claimed fps of 350 but only shot around 240 fps.
So the Crosman Marlin Cowboy BB Rifle is the clear winner in terms of velocity over the Daisy Red Ryder but what about accuracy? That's a different story, the Crosman did not perform all that great for me shooting at a paper target 30 feet away using a rested shooting position. I shot 10 rounds at my paper target and got about a 5-6 inch grouping, there was an underlying smaller tight group that was closer to about 3 inches but a god 3-4 of the BB's came out of it spreading out the group significantly. Compare that to the Daisy Red Ryder with a nice tight 2 inch group.
So what do you want? Power or accuracy? I figure since the Crosman Marlin Cowboy BB Rifle is really targeted of the younger more entry level shooter that it should have good accuracy so they know when they are doing it right and less concerned on if the gun is performing as it should. Sure power is fun and smashing your targets does give a certain satisfaction but you have to hit the target first :)
Both the Crosman Marlin Cowboy BB Rifle and Daisy Red Ryder BB Gun are fun airguns for sure, I guess it just comes down to which one you want to buy...
It's been a while since I pulled out the old Daisy Red Ryder BB Gun. And I know I have already done some Vimeo videos for the Red Ryder and the Crosman Marlin Cowboy but I really wanted to make an updated Field Test Video specifically for the Red Ryder and see how it fairs in a more controlled shooting test.
As always with my Field Test Shooting videos I test out the velocity using my Chrony Chronograph and see what the real world fps is compared to what Daisy Claims which by the way is up to 350 fps. I also setup a paper target about 30 feet back and take 10 shots using a rested and seated shooting position to determine what kind of grouping I can get and how well centered the airgun is out of the box.
During my velocity testing the Daisy Red Ryder BB Gun shot well under the claimed 350 fps by around 100 fps. I can say that the Daisy Red Ryder BB Gun was super consistent and shot between 242 fps as a low and 244 fps as a high averaging 243 fps. The Daisy Red Ryder is sure one of the most consistent airguns I have tested to date in terms of velocity constancy! This will help a lot with vertical accuracy.
During my accuracy test I would have to say the Daisy Red Ryder BB Gun shot pretty close to a 2 inch grouping and was pretty well centered with 4 shots hitting the black bullseye , I did pull my last shot a bit which extended the group a little but this was for sure my fault as I new I pulled it as soon as I shot it, the stock actually dropped on my shoulder a little just as I pulled the trigger.
Overall I really enjoy shooting the Daisy Red Ryder BB Gun, it's so simple yet so fun to shoot, there is just something about a lever action rifle that I really like and the super low cost to purchase and shoot a Daisy Red Ryder BB Gun also makes it a must have for anyone no matter how many airguns you own or what type you shoot.
I was a bit surprised by the Umarex DX-17 Spring Powered BB Pistol, it actually shot a lot better than I was expecting it to perform. I did have to aim rather low since the Umarex DX-17 BB Pistol likes to shoot on the high side but if you are shooting at closer in ranges then you won't have to adjust your aim point so high.
Getting into my performance testing for the Umarex DX-17 Spring Powered BB Pistol, I placed 5 shots through my Chrony Chronograph and averaged 210 fps which again was very close to the Umarex claimed 200 fps, even a little bit higher! he DX-17 is a single shot repeater but because of the BB reservoir you can quickly reload follow up shots by simply point the Umarex DX-17 Spring Powered BB Pistol a little upward while pulling the slide back and pushing it forward to active the spring piston and load a BB at the same time.
As I mentioned the Umarex DX-17 Spring Powered BB Pistol shot on the high side, at 30 feet it's a good 8-9 inches high but I have a feeling that this is about as high as the BB's will rise since they are not going that fast and gravity will start bringing them back down. At about 10-15 feet out from a target the Umarex DX-17 Spring Powered BB Pistol seemed to shoot about 3-4 inches high so not nearly as bad and this can be adjusted pretty easy by simply aiming a bit under the target you are shooting at. In terms of a 10 shot grouping theUmarex DX-17 Spring Powered BB Pistol got about a 4 inch grouping which I have to say kind of surprised me as I was expecting a much larger spread.
So for about $20 you kind of get what you pay for but I really think with the Umarex DX-17 Spring Powered BB Pistol you perhaps get a little more! It has a really good trigger, seemed to be built pretty tuff, shot exactly right on the claimed fps mark and was even able to keep a reasonable grouping. And to keep costs down even more you never need to buy CO2 so that's another bonus.
I have some new guns for everyone to checkout which is always good for everyone, especially me :)
In this update video I show you around three pistols one Arisoft Rifle. With the pistols we have a mixed bag of Pellet, steel BB and plastic Airsoft. First off I take a look at the ASG X9 Classis Beretta M9 CO2 Blowback 4.5mm Steel BB pistol, which by the way is actually made by KJWorks so we know this it's going to be a quality gun! I then switch things up and showoff the new long barrel CO2 powered Umarex Colt Peacemaker SAA pellet revolver that sports a Nickel and Gold finish. Last for the pistols we take a look at the 6mm Airsoft firing Colt 1911 Rail Gun in the Dark Earth finish, it's basically a KWC 1911 but with a little extra bling.
Last but now least to show you in this update video is the ASG CZ Scorpion EVO 3 A1. This product was developed by ASG in cooperation with CZ and is made to give the Airsoft Player the closest shooting experience they can possibly get to handling and shooting a real CZ Scorpion EVO 3 A1!
ASG X9 Classic Beretta Blowback CO2 BB Pistol:
Full metal
4.5mm steel BB's
Full blowback action
2.1 pounds
16 Round full size drop out metal magazine
312 fps
Single & double action
Umarex SAA Colt Peacemaker Nickel & Gold Co2 Pellet Revolver:
Full metal
.177 caliber pellets
Gold highlighted cylinder, hammer & trigger
6.75 inch barrel
Shell loading 6 shooter
380 fps
Single action only
Colt 1911 Rail Gun Dark Earth Blowback CO2 Airsoft Pistol:
Full metal
6mm Airsoft BB's
Comes with red tip but can be removed with some work
Full blowback action
2.1 pounds
17 Round full size drop out metal magazine
345 fps
Single action only
ASG CZ Scorpion EVO 3 A1 AEG Airsoft Rifle:
Metal & plastic build
6mm Airsoft BB's
Comes with red tip but can be removed easily
AEG: single shot, 3 round and full auto shooting modes
5.3 pounds
75 Round magazine
394 fps
Full CZ licensed
I've already done Table Top Video Review for both the ASG CZ Scorpion VZ61 and the ASG B&T BT5 AEG 6mm Airsoft Guns so make sure to checkout both those videos.
What I hav not done so far is make a Filed Test Shooting video for either gun since this winter has been rather brutal here in BC Canada. Today I did manage to get outside and put some rounds through both the ASG CZ Scorpion VZ61 and the ASG B&T BT5 AEG 6mm Airsoft Guns so at least I can report back to everyone on how they performed for me. Sorry still no actual shooting video as my outside time was kind of limited due to it still being cold, we are even expecting some more snow tonight and over the next few days and it's March!
Getting back to my preliminary shooting testing, the ASG CZ Scorpion VZ61 only shot a slight bit higher then 250 but it was the more accurate of the two AEG Airsoft Guns getting close to a 1 inch 10 shot grouping using my standard 30 foot back semi rested shooting position. It did shoot a bit low but perhaps a hop-up adjustment should fix that problem.
Next up I tested out the ASG B&T BT5 MP5 PDW Replica and it did have a little more power hitting closer to 300 fps but it was not as accurate as the CZ shooting a bit high and to the left with most shots within about 1.5 inches, still pretty decent from 30 feet back.
Overall both AEG Airsoft Guns where fun to shoot and when I did let them lose to shoot in full auto mode they performed as expected laying down a stream of Airsoft BB's till the mags where empty :)
Distributer: RWA (Made in Hong Kong)
Model: Interdynamic KG-9
Materials: Steel, aluminum and plastic (polymer) construction.
Weight: 3.22 pounds (1460 grams).
Length: 15.7 inches (398mm).
Propulsion: AEG.
Action: Full auto only.
Ammunition Type: 6mm Airsoft BB's
Ammunition Capacity: 90 round magazines (Comes with 2).
FPS: 360+.
Trigger Pull: The trigger pull on the RWA KG-9 AEG Airsoft Machine Pistol is what you would expect form an AEG pistol as it is basically an on/off switch. Since the RWA KG-9 AEG Airsoft Machine Pistol is full auto only it is not easy to shoot a single shot, it can be done with a very short trigger pull but even then you get the occasional multiple shot. The RWA KG-9 AEG Airsoft Machine Pistol like the real steel original version is full auto only and that's what makes it so fun!
Accuracy: I did get a chance to take the RWA KG-9 AEG Airsoft Machine Pistol outside and put some rounds through my Chronograph and down range at a paper target. I averaged just under 340 fps using .20 gram 6mm Airsoft BB's which is about perfect for this compact machine pistol. I also placed about 10 rounds down range 30 feet back using my standard semi rested shooting position while trying to shoot in semi auto and got a pretty decent 1.5 to 2 inch grouping that was a little high but well centered left to right. Elevation could be adjusted using the hop-up.
Build Quality: The RWA KG-9 AEG Airsoft Machine Pistol is really one of the best made Airsoft guns I have seen in a while, all the metal parst are going to be real steel or aluminum, not your standard zinc alloy found in most airguns these days. The full upper is stamped steel along with the 90 round magazines, the lower is plastic with a few aluminum parts here and there. The fit and finish is also excellent!
Realism: The RWA KG-9 AEG Airsoft Machine Pistol is a replica of the Swedish made Interdynamic KG9 Open Bolt SMP, not the ntratec Tec-9 which was the American version of the KG9. For the most part the RWA Airsoft version is exact with the exception of the barrel shroud being slightly longer to accommodate the 7.4v LiPo batteries.
Pros:
Lots of steel in this gun including full upper, barrel, pins and magazines.
Very high quality build with a solid weight and excellent fit and finish.
Fairly high rate full auto fire.
Comes with battery and two magazines.
Has almost perfect usable working rate of fire averaging around 340 fps with decent overall accuracy.
Working cocking handle.
Fully Licensed.
Cons:
No blowback but there is some recoil feel from the heavy spring action.
No semi auto mode, full auto only.
Sights are not adjustable, can only use hop-up to adjust elevation.
Limited on battery choices.
Comments:
The RWA KG-9 AEG Airsoft Machine Pistol is a really cool looking Airsoft gun, it is a bit larger than most hand guns but could still be used like one since it does not have a stock and can be used for similar shooting situations. The advantage is you have 90 rounds of full auto ammo at your disposal in a size format that is super compact and easy to manoeuvre. You also get some pretty decent power for longer range shooting and the accuracy out of the box at a variety of ranges is also really good. You could even use the RWA KG-9 AEG Airsoft Machine Pistol easily as a primary or even kick ass backup gun as it is super versatile.
Watch my Vimeo Table Top Review of the RWA KG-9 AEG Airsoft Machine Pistol:
