Type: Airsoft.

Manufacturer:King Arms.

Model:Colt M4A1 Metal AEG.

Materials: Metal & Nylon.

Weight: 6 pounds.

Barrel: 15 inches, metal.

Propulsion: AEG

Action: Semi/full auto, single action.

Ammunition Type: 6mm Plastic BB (recommended .20 gram plus).

Ammunition Capacity: 300+ round magazine.

FPS: 450.

If you haven't already checked out my King Arms Colt M4A1 Table Top Review, make sure to do so for all the details and specifications on the King Arms Colt M4A1 Airsoft AEG Carbine.

This Field Test Review focusses primarily on how the AEG  M4A1 performs in feet per second velocity using .25 gram plastic Airsoft BB's, its accuracy in both semi and full auto and of course my comments on it's shoot-ability and overall performance.

For this field test review of my King Arms M4A1 Airsoft rifle I switched from the .20 gram Airsoft BB's to heavier .25 gram plastic BB's. I did this to have a comparison between the two weights since I had already Chronographed and accuracy tested the .20 gram BB's. As expected the fps dropped a bit, down to around 380 fps but still stayed very consistent for me as would be expected with an AEG styled rifle.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Another reason I wanted to test out the heavier .25 gram Airsoft BB's is because generally speaking, heavier BB's will shoot a bit more accurately as they are not as effected by the higher fps this guns is capable of shooing. The .20 gram BB's actually did well so I had high expectation for the .25 gram BB's and I was not disappointed! For this test I shot the King Arms Colt M4A1 from 30 feet out in a semi rested position (rested on a sand bag in the front and standing in the back). I shot 10 rounds in semi auto and got a very respectable 1.5 inch group which rivals any airgun in my collection! I also shot in full auto (I can't really tell you how many rounds ;) and the King Arms Colt M4A1 punched a nice 2 inch hole in the target. I would almost say it even beat out my other full auto 4.5mm steel BB shooting guns in terms of how tight of a group it can shoot while in full auto mode.

I am sure the Airsoft Hop-up system has something to do with the accuracy as the back-rotating BB's should keep a truer trajectory. One thing I notice while shooting this AEG styled Airsoft rifle, is that there is a slight delay from the time you pull the trigger till the shot is released. The trigger is actually activating a motor which in turn pulls the internal spring back, which then releases it once it hits the end of it's cycle. It's not a long delay but it is noticeable. In full auto it really does not matter at all :)

All in all I am again impressed with what an Airsoft gun can do in terms of both looks and performance.

My Vimeo Field Test Review for the King Arms Colt M4A1 6mm AEG Airsoft Carbine:

Buy this Airsoft rifle in Canada   -   Buy this Airsoft rifle in the US

Type: Airsoft.

Manufacturer:King Arms.

Model: Colt M4A1 Metal AEG.

Materials: Metal & Nylon.

Weight: 6 pounds.

Barrel: 15 inches, metal.

Propulsion: AEG

Action: Semi/full auto, single action.

Ammunition Type: 6mm Plastic BB (recommended .20 gram plus).

Ammunition Capacity: 300+ round magazine.

FPS: 450.

Trigger Pull: The trigger pull on the King Arms Colt M4A1 is fairly short and light as it is essentially just an on off switch for the internal electronic components. You can shoot this gun very quickly in semi auto mode, and of course even quicker when full auto is selected.

Accuracy: Again, I tested this Airsoft rifle just like I do my other BB rifles and put 10 rounds into a target from 30 feet out using a semi rested position (sand bag in the front - standing in the rear). I used a non-magnified red dot scope for this test rather than using the built in iron sights. Like my initial WE SCAR test, when I walked up to the paper I was shocked at this Airsoft rifle shooting .20 gram plastic BB's. I again got a 2 inch 10 round grouping! I am beginning to think that a well tuned Airsoft gun can make for a pretty good target plinker!

Build Quality: The King Arms Colt M4A1 Metal AEG Carbine is very well made with a full Metal upper and lower receiver, along with metal parts exactly where they would be on the real steel version of the Colt M4. The only plastic or nylon components are the stocks and the grips and perhaps some internal parts. There is a bit of wiggle in the rear stock and metal magazine but this may be a Colt M4 attribute, for the most part the fit and finish was excellent!

Realism: As with many Airsoft guns, there is great attention to realism and the King Arms Colt M4A1 is no exception. It is an AEG and not a gas blowback Airsoft gun so it does lack some realism in terms of the hard hitting bolt action but on the other hand you can fire what seems like an endless stream of BB's in full auto with this AEG Colt M4A1 Replica. I do like the fact that the charging handle and forward assist works similarly to a real M4 and also the Dust cover cleverly exposes the internal hop-up for easy adjustment. The Colt licensing and branding throughout this M4A1 look-a-like help to really make this Airsoft rifle look believably like a real Colt M4 carbine. 

Purchased From: The Replica Airguns Store.

Pros:

• Amazing attention to detail with lots of working parts.

• Full colt licensing and markings.

• All Metal upper and lower receiver, lots of metal parts throughout.

• Semi auto & full auto selectable.

• High capacity 300+ round magazine.

• Removable carry handle with Weaver/Picatinny rail underneath.

• Nice high 400+ FPS.

• Extremely accurate for plastic BB's.

• Fully adjustable sights with two position Peep sights.

• 6 position adjustable stock.

• Easy access to internal hop-up system.

Cons:

• Magazine and stock seems bit lose.

• Canada version does not come with battery or charger.

• Came with the orange flash hider, you may want to replace or paint it if legal in your area?

• May be too powerful for inside skirmishes without some detuning.

Comments:

I was not fully sure if I would warm up to an AEG style of Airsoft rifle as I really enjoy the realism of a gas blowback type of replica gun. But the overall realism of the King Arms Colt M4A1 metal AEG really won me over and the added working components like the charging handle and forward assist along with the fully adjustable sights and 6 position stock just made it for me with this Airsoft Carbine. There is something to be said about an AR15 styled gun, they just look the part and this very realistic and usable M4 Airsoft replica is not just great to hold and look at but also performs very well which would make it deadly on the field! Now if only I could find some time to use it on the field ;)

Buy this Airsoft rifle in Canada 

Buy this Airsoft rifle in the US

I already mentioned all three of these gun in my previous posts, two being Airsoft: the King Arms Colt M4A1 All Metal and my Western Arms Shorty .40. And one being a 4.5mm steel BB shooter, the Swiss Arms Sig Sauer GSR 1911. I wanted to make you a quick YouTube Preview video to show you around all three replica guns before I get around to actually doing my full reviews for each of them.

I will most likely start off with my King Arms Colt M4A1 All Metal Airsoft rifle, then review my Swiss Arms Sig Sauer GSR 1911 4.5mm BB pistol, then finish off with my deal Airsoft pistol, the Western Arms Shorty 40.

This preview video should give you a good idea about these guns, but make sure to stay tuned for my full review videos for each of them.

Buy this Airsoft rifle in Canada   -   Buy this Airsoft rifle in the US

Buy Swiss Arms GSR 1911 in Canada

I have been very eagerly waiting for my King Arms Colt M4A1 to show up and it finally did. I have wanted an M16 - M4 for some time and to be honest I didn't really care if it was a 4.5mm steel BB shooter or 6mm plastic Airsoft gun. I just wanted it to look the part and hopefully perform well too.

Well I was definitely very happy with the King Arm Colt M4A1 All Metal Airsoft rifle. It looks amazing, has good weight, metal in all the places you would find metal on the real steel version, working bolt assist, working charging handle and both semi and full auto fire modes. My King Arms Colt M4A1 even has a removable carry handle.

And as for performance, it shot right on the money in both fps and accuracy, I don't want to give away too much since I will be doing a full review very soon but you will not be disappointed with this one!

Buy this Airsoft rifle in Canada   -   Buy this Airsoft rifle in the US

One more stock related update for the day! We now have the King Arms Colt M4A1 Metal AEG Airsoft Rifle available in the Canadian Replica Airguns Store in and ready to ship. I will also be receiving this gun early next week for review so make sure to check back for that YouTube Replica Airguns Airsoft Video Review.

Buy this gun in Canada   -   Buy this gun in the US

OK we are one step closer to having stock on some Airsoft guns. I have 4 new full-auto rifles for you to choose from in our Canada and US Replica Airguns Stores. In the US Replica Airguns Store they are in stock and ready to sell but we have to wait just a bit for them here in the Canada Replica Airguns Store so I am giving the Canadian version a bit of a pre-sale price reduction to give you some incentive!

The Canadian versions are all high velocity and shoot in the 450 fps range to allow us to sell them to you here in Canada in the "non-clear" solid metal and polymer versions since they will be classified as "non-regulated firearms" just like a regular airgun.

And yes I will be reviewing these Airsoft rifles for you, hopefully all of them :)

King Arms Colt M4A1 Metal AEG Airsoft Rifle

FN Herstal F2000 Tactical AEG Airsoft Rifle

Kalashnikov AK74 SU AEG Airsoft Rifle

AK47 Kalashnikov Tactical 60th Anniversary AEG Airsoft Rifle
 

Buy these Airsoft guns in Canada   -   Buy these Airsoft guns in the US

Click here to check out my Field Test for the Baikal Drozd Blackbird

Type: BB Machine gun.

Manufacturer:Baikal.

Model:Blackbird IZH MP-661K.

Materials: Metal & Polymer.

Weight: 4 pounds.

Barrel: 8 inches, metal-rifled.

Propulsion: CO2 or (Bulk air with adaptor).

Action: Electronic trigger with 1-3-6 round burst & 300-340-600 Rounds Per Minute.

Ammunition Type: 4.5mm steel BB's.

Ammunition Capacity: 900 rounds.

FPS: 360-500.

Trigger Pull: The trigger pull on the IZH Drozd Blackbird is nice and light due to the fact that the trigger is not mechanical but is instead an electronic on-off switch that operates a solenoid. The solenoid pulsates in turn hitting the CO2 valve release. This is how the single fire and burst fire rates are achieved, by means of electronics.

Accuracy: The Drozd Blackbird is designed to be a machine gun and so testing it in single shot mode for accuracy is kind of taking it out of its element. Even so it did reasonably well, but when when I flicked it over to full auto it actually seemed to tighten up and start grouping even more centered and closer together considering the vast amount of rounds coming out of the barrel all at once :)

Build Quality: This is a typical Russian made gun, all business and less importance put on looks but even so it is visually appealing, at least to me! Everything works exactly as it should and even though the main shell is made out of plastic, it's really more of a weapons grade polymer so there is no cause for concern here. There are a fair amount of metal components like the factory barrel, much of the magazine and many internal parts. This air gun is very durable!

Realism: The Baikal Drozd Blackbird IZH MP-661K is not a replica, but it does look like a sub machine gun of sorts, I'm really just not sure exactly what it looks like as it kind of has its own look. When you start shooting it, looks just don't seem to matter anymore, all you can think about is how much damage is happening down range.

Purchased From: The Replica Airguns Store.

Pros:

• Very well made BB machine gun.

• Excellent power.

• Good accuracy in all shooting modes.

• Uses the 12 gram and 88 gram CO2 (Can also convert to bulk air)

• Stock version can shoot up to 600 rounds per minute.

• Rifled barrel.

• Adjustable rear sight for windage and elevation.

• Improved rail sits higher and is longer then the classic Drozd.

• Drastically Improved magazine capacity (motor hopper system)

• Many mods available for this gun.

• Great for pest control, especially the ones that are on the move.

• 10 out of 10 on the fun factor.

• Made in Russia.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• BB Hopper motor sound is a bit annoying!

• A bit more accuracy in semi auto mode would have been nice.

• On the pricey side.

Comments:

The Baikal Drozd Blackbird IZH MP-661K takes all the fun you get with the Classic Drozd and gives you even more fun. It may be one of the more pricy BB machine guns on the market but it is well worth the extra cost to get such a quality product that not only is great out of the box but can also be modified in so many ways to improve its performance and looks dramatically. If you are looking for the absolute top player in the BB Machine gun category then the Drozd Blackbird is the top contender with its excellent build quality and performance along with the nearly unlimited modifications available to make the Blackbird perform up to anyones standards.

My Vimeo Video Review for this Russian made Blackbird BB Machine gun:

Buy this gun in Canada   -   Buy this gun in the US

Click here to check out my Table Top Review for the Baikal Drozd Blackbird

I'm kind of doing this one backwards this time around. I was going to do the table top review of the Baikal Drozd Blackbird first but the weather was just too nice to pass up today to not get outside and give this gun a thorough testing.

I will be posting the table top review in a few days with all the specification (Here it is now) but if you're looking for some basic info on the Blackbird you can checkout our online store where you can find some statistics on the Drozd Blackbird and you can also checkout my Drozd Classic Review where I do a short comparison between the Drozd Classic and the newer updated Blackbird version.

I had a lot of fun shooting this gun, it lays down a lot of steel in a very short amount of time and has a virtually endless 900 round BB hopper that just keeps on going. During my testing I shot close to 400 rounds or more using one 88 gram CO2 cartridge and even near the end the Baikal Drozd Blackbird had pretty good feet per second performance.

My Baikal Blackbird does have some upgrades: (JimC Barrel, Full Auto-High RPM Mod Chip, Added Accessory Rails, Red Dot Scope, Tactical Light, Laser and Bulk Air kit) but the stock version is "almost" as fun :)

Enjoy this Vimeo video, it was crazy fun to make!

Buy this gun in Canada   -   Buy this gun in the US

Thought I would share this photo of a Magazine doubler for his Umarex MP5K PDW one of my viewers (Daniel) sent to me. He lives in the UK and bought his from a supplier out his way. I don't sell them sorry but I have included an Amazon link for my US viewers.

Sometimes you just got to make a video because you can and because it's just plain old fun! And that's why I made this video of me shooting some cans with dual full auto BB machine guns. One is my full auto converted and trusted Cybergun Mini UZI and the other is my newly acquired ZMZ Tyrex PPA-K-01 Russian Machine Pistol.

So sit back and enjoy, I know I did :)

Buy this gun in Canada   -   Buy this gun in the US

One of my viewers sent some photos of his custom sanded and polished two-tone ASG STI Duty One 1911. Ken did an awesome job and it makes me want to do the same to mine :)

He started out by sanding off the paint with 500 grit sandpaper and working his way finer right up to 2000 grit and then finishing off with some Meguiar’s NXT Generation metal polish. The results are amazing -  see for yourself!

Buy this gun in Canada 

Buy this gun in the US

Type: BB Machine gun.

Manufacturer:Baikal.

Model:IZH MP-661K.

Materials: Metal & Polymer.

Weight: 3.5 pounds.

Barrel: 8 inches, metal-rifled.

Propulsion: CO2 or (Bulk air with adaptor).

Action: Electronic trigger with 1-3-6 round burst & 300-340-600 Rounds Per Minute.

Ammunition Type: 4.5mm steel BB's.

Ammunition Capacity: 30 rounds.

FPS: 360-500.

Trigger Pull: The trigger pull on the IZH Drozd is nice and light due to the fact that the trigger is not mechanical but is instead an electronic on-off switch that operates a solenoid. The solenoid pulsates in turn hitting the CO2 valve release. This is how the single fire and burst fire rates are achieved.

Accuracy: When I was sighting the Baikal Drozd in I got several 5 shot groups well within 1 inch 30 feet out from the target. But when I did my actual video accuracy test, the Drozd did not perform as well, getting more like a 2 inch group, still very reasonable for a gun that can shoot 600 rounds per minute out of the box and 1200 rounds per minute when modified. With metal streaming out the barrel like that you are pretty much going to hit what ever you point it at, the odds are in your favor!

Build Quality: This is a typical Russian made gun, all business and less importance put on looks but even so it is visually appealing, at least to me! Everything works exactly as it should and even though the main shell is plastic it is really a weapons grade polymer so there is no cause for concern here. There are a fair amount of metal components like the factory barrel, most of the magazine and many internal parts.

Realism: Again, the Baikal Drozd IZH MP-661K is not a replica, but it does look like a sub machine gun in many ways, I'm really just not sure exactly what it looks like but when you are shooting this gun you really don't think much about this point because you are too busy grinning!

Purchased From: The Replica Airguns Store.

Pros:

• Very well made BB machine gun.

• Excellent power.

• Good accuracy in all shooting modes.

• Uses the 12 gram CO2 - a bit cheaper! (Can also convert to bulk air)

• Stock version can shoot up to 600 rounds per minute.

• Multiple stock lengths.

• Rifled barrel.

• Adjustable rear sight for windage and elevation.

• Removable magazine hold BB's and CO2.

• Many mods for this gun.

• Great for pest control, especially the ones that don't stay still.

• Made in Russia.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• 12 Gram CO2 - you need to change it often!

• Top Accessory rail is a bit short and low.

• Rear stock can get lose sometimes (just add some tape to tighten it up a bit).

Comments:

The Baikal IZH MP-661K is one of the most fun BB machine guns out there and well worth the extra cost to get such a quality product that not only is great out of the box but can also be modified in so many ways to improve it's performance and looks dramatically. Sure the Baikal IZH MP-661K now has a big brother, the Drozd Blackbird, but the Blackbird may be just a bit of overkill for some, I kind of like the Drozd Classics more compact size and if you can't nail what your shooting at with 30 rounds then your doing something very wrong! The Drozd is really the epitome of extreme BB gun weaponry!

My Vimeo Video Review for this Russian made BB Machine gun:

Buy BB Rifles in Canada

Buy BB Rifles in the US

Mil3 sent me some more updated photos of his customized Cybergun Tanfoglio Witness 1911 now with the Sight Rail add on.

Buy this gun in Canada   -   Buy this gun in the US

The Webley Alecto (AKA: Zoraki HP-01) may not fit in exactly as a "Replica" Airgun, although it does resemble a bloated Dessert Eagle! But it is an Airgun worthy of spending some time reviewing an this is now my third Vimeo Video review for the Webley Alecto. My first Video Review was a Table Top Review where I covered most of the Webley's basic operation. My second Vimeo Video was a Chronograph Test to see what my Webley Alecto could do performance wise for FPS.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

I really wanted to do a video of this gun just shooting because that's what it does best, put lead down range very accurately! So I setup three cameras to capture it all from just about every angle I could think of and I set up 30 feet away from my target and shot 5 rounds in a rested position using a Red Dot Scope. The results where not surprising - pretty close to a 1/2 inch grouping!

If you're looking for a compact, hard hitting, accurate target or small pest control Air gun then look no further, the Webley Alecto has the goods!

Watch the full Multi-angle Vimeo Video of my Webley Alecto Shooting Test:

Buy this gun in Canada

Buy this gun in the US

I can't help but share some of the photos my happy viewers and customers send me and it seem like the hot item right now is the Cybergun Tanfoglio Witness 1911 CO2 BB Pistol yet again.

These latest photos are brought to you by Mil3 who added rubber grips and an accessory rail to his Tanfoglio Witness 1911. He said the rubber grips only needed some slight carving out on the back side to make them fit.

Buy this gun in Canada   -   Buy this gun in the US

 

I've had a few questions about replacing the gips on the Cybergun Tanfoglio Witness 1911 BB pistol and if it is possible to use standard 1911 wood grips? The answer is yes if you don't mind spending about 15-20 minutes removing just a bit of the wood material in a few spots on the 1911 Wood Grips

Here are the instruction thanks to one of my Customers and viewers Michel:

First of all the holes are in the right place thank god for that! A dremel is the ideal tool youll need, and the whole mod.

1. Mark out the material you want to remove.
2. Remove the material on bottom part of each grip with a dremel using a cicular sandpaper bit.
3. Repeat on other grip .On the top of the grip on the mag release side you might have to remove material to clear pin.

After on the other side of the mag release button make sure there is enough clearance for when you depress the button.

Here are a few pictures of the mod. Have fun:

Buy this gun in Canada   -   Buy this gun in the US

Another filed test video in the series. This one is of the Umarex Walther PPK/S CO2 4.5mm BB pistol, I show you both my regular unmodified all black PPK/S and shoot it through my Chrony Chronograph with an averaged reading of 282 FPS, not bad considering the manufacturers claim is 295.

I also shoot 8 rounds with my stock Umarex PPK/S at a target to see what kind of accuracy I get, and just for fun I shoot a 15 round magazine into the same target with my modified fully-auto sliver slided PPK/S.

To finish things up, I slowdown the action just a bit using my high speed Casio camera to capture the blowback action of both my stock and modified Umarex Walther PPK's.

Enjoy my YouTube Video of my Umarex Walther PPK/S CO2 BB pistols getting Chronographed, shooting at a target and slowed down a bit with my High Speed Camera.

Buy this gun in Canada   -   Buy this gun in the US

As promised, here is my Vimeo video Chronograph test along with some more shots on target for an idea on the accuracy for the Cybergun GSG 92 Beretta 92FS copy.

My Chronograph results where very good with an average 8 shot FPS result of 314, right in line with the manufacturers specifications! I also took some extra time to do some more target testing and shot the GSG 92 BB shooter at a target from 20 feet out in a free standing position and I didn't get the best grouping from it today but hey, it's got full auto too so how important is accuracy?

Lastly a pulled out my Casio high-speed camera and took some video of the blowback action of the Cybergun GSG 92FS Beretta replica at 210 frames per second.

Enjoy my Vimeo Video of the Cybergun GSG 92 CO2 BB gun getting Chronographed, shooting at a target and slowed down a bit.

Buy this gun in Canada

Buy this gun in the US

I already have a customized full auto Drozd Blackbird who can pass up another Dorzd when the price is right! I will be making a double Drozd video down the road :)

My new Classic Drozd came with the Full Auto mod chip, the JimC hand made barrel, a 68ci Nitro Duck 4500 PSI carbon fiber tank and bulk air hose.

I also got the Red Dot scope with my new purchase but used one of my rial risers that fit perfectly giving my new Drozd an AR look to it.

Buy Drozd Guns in Canada

Buy BB Guns in the US

In my recent acquisition of guns from my friend, I also procured a customized Crosman 2240 .22 caliber CO2 bolt action air pistol. It came customized with a new RJ Machine bolt, longer barrel and wood grips.

All I need to add is a nice Red Dot or low powered pistol scope and this classic CO2 air pistol will make a really nice target shooter.