View fullsize

Type: Break barrel pellet rifle.
Manufacturer: Umarex USA.
Model: Ruger Explorer.
Materials: Metal and polymer parts.
Weight: 4.45 pounds (2.5 kg).
Barrel: 12 inches, metal rifled.
Propulsion: Spring piston.
Action: Single shot.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 1.
FPS: 495.

View fullsize

Trigger Pull: I found the Ruger Explorer Youth Break Barrel Pellet Rifle to have a fairly light trigger, there is some initial take up with a smooth almost undetectable break or release point, I found that as I shot the Ruger Explorer Youth Break Barrel Pellet Rifle the trigger seemed to be breaking in a bit which made it a bit hard to figure exactly when the trigger was going to release but I feel over time and once the Ruger Explorer Youth Break Barrel Pellet Rifle is broken in the trigger will become more predictable.

View fullsize

Accuracy: Since I have already made a shooting or field test video for the Ruger Explorer Youth Break Barrel Pellet Rifle, I can comment on its performance n this review! With 6 grain lead pellets (on the lighter side), I was able to get a 5 shot Chronograph average velocity of 485 fps. Using heavier 7-8 grain pellets the velocity slowed down a bit to around 400 fps. In terms of accuracy the Ruger Explorer Youth Break Barrel Pellet Rifle performed well getting about a 1 inch 10 shot grouping on my paper target setup 30 feet down range. I know the Ruger Explorer Youth Break Barrel Pellet Rifle can do better than this once the trigger settles down a bit since some shots went off unexpectedly.

View fullsize

Build Quality: The Ruger Explorer Youth Break Barrel Pellet Rifle is not an expensive air rifle and is more or less an entry level spring piston pellet shooter. That said it is built fairly well with a metal receiver, barrel and trigger setup. The modern looking stock is polymer and the steel barrel is coated in a synthetic soft plastic to help with long term durability. The real fiber optic sight is plastic so you will have to be careful with it as it does protrude a bit from the air rifle.

View fullsize

Realism: Since the Ruger Explorer Youth Break Barrel Pellet Rifle is not a replica realism is not really a factor here but it does look like a gun so treat it as if it was a real gun since most people will not know the difference. Always transport and store any airgun safely and discreetly.

View fullsize

Pros:

• Really great looking air rifle with a modern look to it.

• Finish is very durable with its polymer stock and plastic/rubber coated barrel.

• Fully adjustable fiber optic sights are easy to sight in and use.

• Receiver is notched for ring mounts so you can add an optical sight or red dot to it.

• Trigger is fairly light, just need some break in time with it.

• Cocking effort is fairly easy at 16.5 pounds.

• Great size gun for all ages.

• Power and accuracy were good for an entry level air rifle.

View fullsize

Cons:

• I did find the trigger break/release point to be a bit unpredictable but I feel this is a break-in issue and will become more consistent over time.

• You have to remember to push that safety in with ever shot.

View fullsize

Comments:
The Ruger Explorer Youth Break Barrel Pellet Rifle is marketed as a Youth air rifle but in reality it would be great fun for all ages. I am a fairly large person at 6 feet tall and I had no problem dealing with the slightly shorter configuration. The trigger guard is nice and open and allows for large fingers which is not always the case with airguns designed for smaller individuals. The overall quality you get with the Ruger Explorer Youth Break Barrel Pellet Rifle for the lower entry level price tag is very good and in terms of performance I feel you for sure get your monies worth with the Ruger Explorer Youth Break Barrel Pellet Rifle.

Buy Ruger Explorer Youth Air Pellet Rifle in Canada

Buy Ruger Explorer Youth Air Pellet Rifle in the US

View fullsize

I don't do a lot of Springer (Spring Piston) Air Rifle shooting tests or even reviews for that matter. Mainly for a couple of reasons: Number 1, my content is mostly focused around Replica style Airguns and Number 2, it's kind of hard to test out the longer range airguns in my 30 foot airgun range. That said I felt the Ruger Explorer Youth Break Barrel Pellet Rifle would be a really great airgun to review since it is both affordable and even though it is targeted for the youth market, it really does make a great shooter for all ages.

View fullsize

I have not done a Table Top Review for the Ruger Explorer Youth Break Barrel Pellet Rifle but plan to shortly so stay posted for more detailed info on the Ruger Explorer Youth Break Barrel Pellet Rifle down the road in that review.

View fullsize

Even at 30 feet out, shooting the Ruger Explorer Youth Break Barrel Pellet Rifle should give us an idea of the ballpark this gun is able to shoot within, I also only used the adjustable fiber optic open sights for this review but I would suggest a low powered optical Scope or even a Red Dot since the Ruger Explorer Youth Break Barrel Pellet Rifle is grooved for scope mounts.

View fullsize

So how'd we do during my Field Test Shooting Video for the Ruger Explorer Youth Break Barrel Pellet Rifle? Not bad I would say! Using about 6 grain rather light weight .177 caliber lead pellets I was able to get really close to the 500 fps claimed fps mark coming in just under at a 5 shot testing average of 485 fps. I did put a couple heavier grain pellets through my Chrony Chronograph and got closer to the 400 fps mark, still not bad for this lighter sprung spring piston air rifle.

View fullsize

In terms of accuracy, shooting at my paper target setup 30 feet down range in my Sea Can Airgun Range, I shot about a 1 inch 10 shot grouping. I was finding the trigger break-in to be a bit unpredictable during this testing which led to some premature shots going off so I do feel once the Ruger Explorer Youth Break Barrel Pellet Rifle is broken in and me getting use to the trigger break, I should be able to improve on this result.

Overall the Ruger Explorer Youth Break Barrel Pellet Rifle is a really nice entry level airgun perfect for all ages and not just the youth market. It looks really cool, is easy to cock and has a very resilient finish. Oh ya it shoots pretty good to!

View fullsize

Buy Ruger Explorer Youth Break Barrel Pellet Rifle in Canada

Buy Ruger Explorer Youth Break Barrel Pellet Rifle in the US

View fullsize

Yet another retest for an airgun I have already reviewed. But some airguns need another "shot"! Today I just kind of felt like shooting a springer and the Baikal MP-53M Break Barrel .177 Pellet Air Pistol came to mind. I'm not the best at shooting spring pistons airguns since they take a more softer relaxed grip and I tend to hold guns with a bit of a firmer grip.

If you're interested you can watch my previous Field Test Shooting Video for the Baikal MP-53M I performed a couple years back outside on my deck.

View fullsize

As always in my new Sea Can Shipping Container I perform a Chronograph velocity test to see what the real world feet per second is and  then I perform a followup accuracy test shooting 10 rounds at a paper target 30 feet down range using a rested seated position. During the velocity Chrony test for the Baikal MP-53M Break Barrel .177 Pellet Air Pistol I was able to get an average of 405 fps which was much higher than my previous testing where I averaged 319 fps. I was using different 7 grain lead pellets but I don't think they where that much different in weigth since the Diabolo pellets should have been around 6-7 grain.

View fullsize

Moving onto the accuracy portion of my Field Test review, this time around my shots stayed a little tighter than last time stretching out to about 2 inches but most of the 10 shots where all within 1 to 1.5 inches. The trigger on the Baikal MP-53M Break Barrel .177 Pellet Air Pistol is really great, super light with just a little take-up and virtually a hair trigger after that with zero friction.

View fullsize

I also wanted to mention that cocking the Baikal MP-53M Break Barrel .177 Pellet Air Pistol is fairly easy and that I did find I needed to set the rear sigh to the all the way down position to get my shots to hit close to the bullseye as this gun seemed to like to shoot rather high out of the box.

Buy Baikal MP-53M Pellet Air Pistol

View fullsize

Another revisit for an inexpensive and fun BB shooter, the Crosman Marlin Cowboy BB Rifle! I have done some previous video reviews and comparisons for the Crosman Marlin Cowboy BB Rifle so make sure to check them out. I also recently did an update Field Test Shooting Video for the Daisy Red Ryder BB gun which is a very comparable airgun to the Crosman Marlin Cowboy BB Rifle.

View fullsize

Here is a quick overview of the Crosman Marlin Cowboy BB Rifle, it's designed for younger smaller shooter with it's short stock but it's still fun of all ages! You can store 700 4.5mm Steel BB's in its internal magazine and Crosman claims a max velocity of 350 fps. Like the Daisy Red Ryder the power source is a spring piston that is activated by the lever action.

View fullsize

Now let's talk about how the Crosman Marlin Cowboy BB Rifle performed in my Sea Can Field Test Shooting test...  Crosman claims a max fps of 350, my Chronograph results came in at a 5 shot average of 316 fps which is not bad compared to the Daisy Red Ryder that also has a claimed fps of 350 but only shot around 240 fps.

View fullsize

So the Crosman Marlin Cowboy BB Rifle is the clear winner in terms of velocity over the Daisy Red Ryder but what about accuracy? That's a different story, the Crosman did not perform all that great for me shooting at a paper target 30 feet away using a rested shooting position. I shot 10 rounds at my paper target and got about a 5-6 inch grouping, there was an underlying smaller tight group that was closer to about 3 inches but a god 3-4 of the BB's came out of it spreading out the group significantly.  Compare that to the Daisy Red Ryder with a nice tight 2 inch group.

View fullsize

So what do you want? Power or accuracy? I figure since the Crosman Marlin Cowboy BB Rifle is really targeted of the younger more entry level shooter that it should have good accuracy so they know when they are doing it right and less concerned on if the gun is performing as it should. Sure power is fun and smashing your targets does give a certain satisfaction but you have to hit the target first :)

View fullsize

Both the Crosman Marlin Cowboy BB Rifle and Daisy Red Ryder BB Gun are fun airguns for sure, I guess it just comes down to which one you want to buy...

View fullsize

It's been a while since I pulled out the old Daisy Red Ryder BB Gun. And I know I have already done some Vimeo videos for the Red Ryder and the Crosman Marlin Cowboy but I really wanted to make an updated Field Test Video specifically for the Red Ryder and see how it fairs in a more controlled shooting test.

View fullsize

As always with my Field Test Shooting videos I test out the velocity using my Chrony Chronograph and see what the real world fps is compared to what Daisy Claims which by the way is up to 350 fps. I also setup a paper target about 30 feet back and take 10 shots using a rested and seated shooting position to determine what kind of grouping I can get and how well centered the airgun is out of the box.

View fullsize

During my velocity testing the Daisy Red Ryder BB Gun shot well under the claimed 350 fps by around 100 fps. I can say that the Daisy Red Ryder BB Gun was super consistent and shot between 242 fps as a low and 244 fps as a high averaging 243 fps. The Daisy Red Ryder is sure one of the most consistent airguns I have tested to date in terms of velocity constancy! This will help a lot with vertical accuracy.

View fullsize

During my accuracy test I would have to say the Daisy Red Ryder BB Gun shot pretty close to a 2 inch grouping and was pretty well centered with 4 shots hitting the black bullseye , I did pull my last shot a bit which extended the group a little but this was for sure my fault as I new I pulled it as soon as I shot it, the stock actually dropped on my shoulder a little just as I pulled the trigger.

View fullsize

Overall I really enjoy shooting the Daisy Red Ryder BB Gun, it's so simple yet so fun to shoot, there is just something about a lever action rifle that I really like and the super low cost to purchase and shoot a Daisy Red Ryder BB Gun also makes it a must have for anyone no matter how many airguns you own or what type you shoot. 

Buy the Daisy 1938 Red Ryder in Canada

Buy the Daisy 1938 Red Ryder in the US

View fullsize

I was a bit surprised by the Umarex DX-17 Spring Powered BB Pistol, it actually shot a lot better than I was expecting it to perform. I did have to aim rather low since the Umarex DX-17  BB Pistol likes to shoot on the high side but if you are shooting at closer in ranges then you won't have to adjust your aim point so high.

View fullsize

Getting into my performance testing for the Umarex DX-17 Spring Powered BB Pistol, I placed 5 shots through my Chrony Chronograph and averaged 210 fps which again was very close to the Umarex claimed 200 fps, even a little bit higher! he DX-17 is a single shot repeater but because of the BB reservoir you can quickly reload follow up shots by simply point the Umarex DX-17 Spring Powered BB Pistol a little upward while pulling the slide back and pushing it forward to active the spring piston and load a BB at the same time.

View fullsize

As I mentioned the Umarex DX-17 Spring Powered BB Pistol shot on the high side, at 30 feet it's a good 8-9 inches high but I have a feeling that this is about as high as the BB's will rise since they are not going that fast and gravity will start bringing them back down. At about 10-15 feet out from a target the Umarex DX-17 Spring Powered BB Pistol seemed to shoot about 3-4 inches high so not nearly as bad and this can be adjusted pretty easy by simply aiming a bit under the target you are shooting at. In terms of a 10 shot grouping theUmarex DX-17 Spring Powered BB Pistol got about a 4 inch grouping which I have to say kind of surprised me as I was expecting a much larger spread.

View fullsize

So for about $20 you kind of get what you pay for but I really think with the Umarex DX-17 Spring Powered BB Pistol you perhaps get a little more! It has a really good trigger, seemed to be built pretty tuff, shot exactly right on the claimed fps mark and was even able to keep a reasonable grouping. And to keep costs down even more you never need to buy CO2 so that's another bonus.

Buy the Umarex DX17 Spring BB Pistol in the US

Buy the Umarex DX17 Spring BB Pistol in Canada

View fullsize

Type: BB air pistol.
Distributer: Umarex.
Model: DX-17.
Materials: Mostly plastic build.
Weight: 1.6 pounds (726 grams).
Barrel: 4.27 inches, non-rifled.
Propulsion: Spring.
Action: Single shot.
Ammunition Type: 4.5mm Steel BB's.
Ammunition Capacity: 15 round BB reservoir.
FPS: 200.

View fullsize

Trigger Pull: The single action only trigger pull on the Umarex DX-17 Spring Powered BB Pistol is actually pretty good. It's fairly short with only a little bit of very light take up and then an easy release that has no added friction. So you will have to get use to when and where the release happens but it is a really decent trigger for such an inexpensive airgun.

View fullsize

Accuracy: I have only shot the Umarex DX-17 Spring Powered BB Pistol a few times to get use to the mechanical operation of using this spring powered pistol since there is a very specific order in which you need to cock and load the Umarex DX-17 for proper operation. I did find the DX-17 shot a bit high for me at 30 feet out so I had to adjust my aim point about 5-6 inches lower to hit targets at this range. For further out shooting you many not need to do so since the fps is fairly low and I would expect the BB to drop pretty quickly. In terms of power being that the Umarex DX-17 Spring Powered BB Pistol is only rated at 200fps, well it seems sufficient enough for plinking away at targets and should have no problem getting through a pop can.

View fullsize

Build Quality: I was expecting this $20 low cost BB airgun to be fairly low quality in general but when I took it out of the plastic clamshell packaging I was pleasantly surprised by the overall quality and how the Umarex DX-17 Spring Powered BB Pistol felt in my hand. It has a good weight to it and the fit and finish are really good. Mechanical parts tolerances feel snug and the plastic used feels of good quality.

View fullsize

Realism: The Umarex DX-17 Spring Powered BB Pistol as far as I know is not a replica of any specific real steel gun in production but it does kind of remind me of a Browning Hi-power at least the back half and the way the frame angles up a bit in front of the trigger. Other than that it looks the part of a real gun. The DX-17 has what looks like real working parts on it with the slide catch, magazine release and magazine but plat all moulded into the airgun.
Available at the: Replica Airguns Store

View fullsize

Pros:

• At $21 Canadian its great value for a target plinker.

• It actually looks and feels pretty good in person, better than I expected build quality and weight to it.

• No CO2 required so very cheap to shoot.

• Single action trigger is actually really decent, better than most airguns.

• Accessory rail for adding a red dot or perhaps a tactical light.

• 15 round reservoir makes followup shots quicker and no fumbling around loading BB’s in-between shots.

• Lower fps means if you do do something stupid you are less likely to have to make a trip to the doctor

View fullsize

Cons:

• Pretty low fps so don’t expect any long range shooting or great penetration.

• Sights are not adjustable and it seems to shoot kind of high.

• Why not rifle the barrel and make pellets an option?

View fullsize

Comments:

I rarely review these super low cost airguns especially spring powered ones with low fps, it almost seems like why would you want any of that? But you know the Umarex DX-17 Spring Powered BB Pistol is actually a great little airgun and you really can't beat the price tag. You are also going to save a bunch of money not having to buy CO2 and once you load 15 rounds into the BB reservoir you can empty the DX-17 fairly quickly. Sure the power seems a bit low but it gets the job done and like I said if there was an accident, you are less likely to break that window or require medical attention. I think this would be a great add on to an existing order you might be making with us, that way you wouldn't have to pay for shipping for this one item and you get a fun little plinker for only $20 more.

My Vimeo Videos for the Umarex DX-17 Spring Powered BB Pistol:

Buy Umarex DX-17 Spring Powered BB Pistol in Canada 

Buy Umarex DX-17 Spring Powered BB Pistol in the US

View fullsize

Another Airgun Shipping Container (Sea Can) Shooting video and for this indoor filed test I put the KWC - Cybergun M45A1 1911 CO2 Blowback Airsoft Pistol through its paces.

What I am super happy about is that my Chrony Chronograph seems to be working really well as I tested a pellet, steel BB and Airsoft pistol out today and every single round through my Chrony got a reading :)

Now back to the Field Test Shooting Review at hand... I started off by placing 5 shots through my Chrony Chronograph using a brand new CO2 with .20 gram Airsoft BB's and got a really consistent reading for all 5 shots with an average of 357. The lowest shot was 353 and the fastest shot was 364 so all shots where really close in velocity. The container temperature was a near perfect shooting temperature of 23 degrees Celsius which was ideal for optimal CO2 velocity testing.

View fullsize

During my accuracy portion of this Field Shooting Test. I used my new seated in the back and sand bag rested up front shooting position which is about 30 feet back from my paper target. I did notice during my Chrony testing that the Cybergun KWC Colt 1911 Rail Gun M45 A1 CO2 Blowback BB Pistol liked to shoot a bit high, perhaps the hop-up needs a bit of twerking? So for my accuracy testing I shot at the bottom ring of the target, this helped me get more shots on the paper for sure but the Airsoft BB's still moved around a bit vertically. I was able to get about a 4-5 inch 10 shot grouping which is totally acceptable for a close range Airsoft sidearm and in an Airsoft battle I would think even shooting at about 50 feet or so I could easily hit a persons mid section consistently.

The Cybergun KWC Colt 1911 Rail Gun M45 A1 CO2 Blowback BB Pistol has a ton of blowback kick to it and a super nice single action trigger like all the KWC 1911's The modern Tactical coloration and trimmings makes this pistol a great choice as a present day side arm. It's real looker for sure with performance to match!

Buy Colt 1911 Rail Gun Airsoft Pistol in Canada

Buy Colt 1911 Rail Gun Airsoft Pistol in the US

Type: Blowback Airsoft Pistol.
Manufacturer: KWC - Distributed by Cybergun.
Model: Colt 1911 M45A1.
Materials: Almost all metal.
Weight: 2 pounds (907 grams).
Barrel: Metal non-rifled.
Propulsion: CO2 x 1.
Action: Semi auto blowback, single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 17 round full size metal magazine.
FPS: 340+ using .20 gram BB's.

Trigger Pull: The trigger pull on the Cybergun KWC Colt 1911 M45A1 CO2 Blowback Airsoft Pistol is what you would expect from a true single action 1911 styled pistol and typical to all the other KWC 1911's on the market. It has a short take up and then a nice light and crisp release. The working grip safety is a nice touch requiring your palm to be pressed against it for the trigger and hammer to operate..

Accuracy: At this point I have not shot the Cybergun KWC Colt 1911 M45A1 CO2 Blowback Airsoft Pistol, I imagine it should perform well considering it has adjustable spin-up or hop-up. According to the manufacturers claimed fps, we should get somewhere in the mid to high 300 fps range using .20 gram Plastic Airsoft BB's. I'll add this one to the list of airguns I need to field test review!

Build Quality: Most KWC built full blowback airguns are built pretty well with an almost all metal build and good overall fit but sometimes the finish can wear off a bit especially in the high points. The Cybergun KWC Colt 1911 M45A1 CO2 Blowback Airsoft Pistol seems to have a bit heavier finish on it. I looks really good and seems to be holding up well.

Realism: The Cybergun KWC Colt 1911 M45A1 CO2 Blowback Airsoft Pistol is a close replica of the real steel Colt 1911 M45A1 in almost every way other than the fact that it shoot s6mm airsoft BB's rather than 45 auto bullets :) The only real notable cosmetic difference I saw was the rail having less notches in it. Other than that it is bang on including the layered grips.
Available From: The Replica Airguns Store.

Pros:

• All metal construction - Good weight and solid feeling gun.

• Nice heavy blowback action.

• Very Accurate 1911 M45A1 styled replica.

• True 1911 Single action trigger, excellent pull, very smooth and light.

• Accurate trigger design and working grip safety.

• Lots of tactical upgrades on this version (Tac style trigger and hammer, textured grips, ambidextrous safety, white dot sights, Rail for accessories)

• Love the desert tan color and layered grips.

Cons:

• Sacrifice fps and shots per CO2 because of the heavy blowback but worth it.

• Finish on the Cybergun and KWC guns can were off on the high points a bit but some people like the look.

• Comes with the orange tip (I took mine off).

Comments:

I have always been a big fan of the KWC line of full blowback airguns and this one is no exception.  It's kind of interesting that KWC does not seem to make there own blinded out versions of these guns and that a company like Cybergun is distributing them? They do look really great and this entire line with all the variations and new models will for sure keep selling these airguns. And they don't just come in Airsoft versions, I will also be taking a look at some similar 4.5mm Steel BB KWC made airguns shortly!

My Vimeo Video Review for the Cybergun KWC Colt 1911 M45A1 CO2 Blowback Airsoft Pistol:

Buy Cybergun M45A1 Airsoft Pistol in Canada

Buy Cybergun M45A1 Airsoft Pistol in US

I have some new guns for everyone to checkout which is always good for everyone, especially me :)

In this update video I show you around three pistols one Arisoft Rifle. With the pistols we have a mixed bag of Pellet, steel BB and plastic Airsoft. First off I take a look at the ASG X9 Classis Beretta M9 CO2 Blowback 4.5mm Steel BB pistol, which by the way is actually made by KJWorks so we know this it's going to be a quality gun! I then switch things up and showoff the new long barrel CO2 powered Umarex Colt Peacemaker SAA pellet revolver that sports a Nickel and Gold finish. Last for the pistols we take a look at the 6mm Airsoft firing Colt 1911 Rail Gun in the Dark Earth finish, it's basically a KWC 1911 but with a little extra bling.

Last but now least to show you in this update video is the ASG CZ Scorpion EVO 3 A1. This product was developed by ASG in cooperation with CZ and is made to give the Airsoft Player the closest shooting experience they can possibly get to handling and shooting a real CZ Scorpion EVO 3 A1!

ASG X9 Classic Beretta Blowback CO2 BB Pistol:

• Full metal

• 4.5mm steel BB's

• Full blowback action

• 2.1 pounds

• 16 Round full size drop out metal magazine

• 312 fps

• Single & double action

Umarex SAA Colt Peacemaker Nickel & Gold Co2 Pellet Revolver:

• Full metal

• .177 caliber pellets

• Gold highlighted cylinder, hammer & trigger

• 6.75 inch barrel

• Shell loading 6 shooter

• 380 fps

• Single action only

Colt 1911 Rail Gun Dark Earth Blowback CO2 Airsoft Pistol:

• Full metal

• 6mm Airsoft BB's

• Comes with red tip but can be removed with some work

• Full blowback action

• 2.1 pounds

• 17 Round full size drop out metal magazine

• 345 fps

• Single action only

ASG CZ Scorpion EVO 3 A1 AEG Airsoft Rifle:

• Metal & plastic build

• 6mm Airsoft BB's

• Comes with red tip but can be removed easily

• AEG: single shot, 3 round and full auto shooting modes

• 5.3 pounds

• 75 Round magazine

• 394 fps

• Full CZ licensed

Buy Umarex SAA Colt Peacemaker Nickel & Gold Co2 Pellet Revolver in Canada

Buy ASG X9 Classic Beretta Blowback CO2 BB Pistol in Canada

Buy ASG X9 Classic Beretta Blowback CO2 BB Pistol in the US

Buy Colt 1911 Rail Gun Dark Earth Blowback CO2 Airsoft Pistol in Canada

Buy Colt 1911 Rail Gun Dark Earth Blowback CO2 Airsoft Pistol in the US

Buy ASG CZ Scorpion EVO 3 A1 AEG Airsoft Rifle in Canada

Buy ASG CZ Scorpion EVO 3 A1 AEG Airsoft Rifle in the US

I've already done Table Top Video Review for both the ASG CZ Scorpion VZ61 and the ASG B&T BT5 AEG 6mm Airsoft Guns so make sure to checkout both those videos.

What I hav not done so far is make a Filed Test Shooting video for either gun since this winter has been rather brutal here in BC Canada. Today I did manage to get outside and put some rounds through both the ASG CZ Scorpion VZ61 and the ASG B&T BT5 AEG 6mm Airsoft Guns so at least I can report back to everyone on how they performed for me. Sorry still no actual shooting video as my outside time was kind of limited due to it still being cold, we are even expecting some more snow tonight and over the next few days and it's March!

Getting back to my preliminary shooting testing, the ASG CZ Scorpion VZ61 only shot a slight bit higher then 250 but it was the more accurate of the two AEG Airsoft Guns getting close to a 1 inch 10 shot grouping using my standard 30 foot back semi rested shooting position. It did shoot a bit low but perhaps  a hop-up adjustment should fix that problem.

Next up I tested out the ASG B&T BT5 MP5 PDW Replica and it did have a little more power hitting closer to 300 fps but it was not as accurate as the CZ shooting a bit high and to the left with most shots within about 1.5 inches, still pretty decent from 30 feet back.

Overall both AEG Airsoft Guns where fun to shoot and when I did let them lose to shoot in full auto mode they performed as expected laying down a stream of Airsoft BB's till the mags where empty :)

Distributer: RWA (Made in Hong Kong)

Model: Interdynamic KG-9

Materials: Steel, aluminum and plastic (polymer) construction.

Weight: 3.22 pounds (1460 grams).

Length: 15.7 inches (398mm).

Propulsion: AEG.

Action: Full auto only.

Ammunition Type: 6mm Airsoft BB's

Ammunition Capacity: 90 round magazines (Comes with 2).

FPS: 360+.

Trigger Pull: The trigger pull on the RWA KG-9 AEG Airsoft Machine Pistol is what you would expect form an AEG pistol as it is basically an on/off switch. Since the RWA KG-9 AEG Airsoft Machine Pistol is full auto only it is not easy to shoot a single shot, it can be done with a very short trigger pull but even then you get the occasional multiple shot. The RWA KG-9 AEG Airsoft Machine Pistol like the real steel original version is full auto only and that's what makes it so fun!

Accuracy: I did get a chance to take the RWA KG-9 AEG Airsoft Machine Pistol outside and put some rounds through my Chronograph and down range at a paper target. I averaged just under 340 fps using .20 gram 6mm Airsoft BB's which is about perfect for this compact machine pistol. I also placed about 10 rounds down range 30 feet back using my standard semi rested shooting position while trying to shoot in semi auto and got a pretty decent 1.5 to 2 inch grouping that was a little high but well centered left to right. Elevation could be adjusted using the hop-up.

Build Quality: The RWA KG-9 AEG Airsoft Machine Pistol is really one of the best made Airsoft guns I have seen in a while, all the metal parst are going to be real steel or aluminum, not your standard zinc alloy found in most airguns these days. The full upper is stamped steel along with the 90 round magazines, the lower is plastic with a few aluminum parts here and there. The fit and finish is also excellent!

Realism: The RWA KG-9 AEG Airsoft Machine Pistol is a replica of the Swedish made Interdynamic KG9 Open Bolt SMP, not the ntratec Tec-9 which was the American version of the KG9. For the most part the RWA Airsoft version is exact with the exception of the barrel shroud being slightly longer to accommodate the 7.4v LiPo batteries.

Pros:

• Lots of steel in this gun including full upper, barrel, pins and magazines.

• Very high quality build with a solid weight and excellent fit and finish.

• Fairly high rate full auto fire.

• Comes with battery and two magazines.

• Has almost perfect usable working rate of fire averaging around 340 fps with decent overall accuracy.

• Working cocking handle.

• Fully Licensed.

Cons:

• No blowback but there is some recoil feel from the heavy spring action.

• No semi auto mode, full auto only.

• Sights are not adjustable, can only use hop-up to adjust elevation.

• Limited on battery choices.

Comments:

The RWA KG-9 AEG Airsoft Machine Pistol is a really cool looking Airsoft gun, it is a bit larger than most hand guns but could still be used like one since it does not have a stock and can be used for similar shooting situations. The advantage is you have 90 rounds of full auto ammo at your disposal in a size format that is super compact and easy to manoeuvre. You also get some pretty decent power for longer range shooting and the accuracy out of the box at a variety of ranges is also really good. You could even use the RWA KG-9 AEG Airsoft Machine Pistol easily as a primary or even kick ass backup gun as it is super versatile.

Watch my Vimeo Table Top Review of the RWA KG-9 AEG Airsoft Machine Pistol:

This year at SHOT Show 2017 in Las Vegas, I found there wasn’t a lot of new Airgun products but as always there are some that stood out for me. If you want more info on each Airgun Company then make sure to watch my full interviews for this years SHOT Show 2017. So without prolonging this video any longer let’s get right into it…

Umarex Legends MP CO2 Full Auto German MP40 Replica Machine-gun:

What’s not to like about the Umarex Legends MP? It has lots of metal parts weighing in at 7.7 pounds, a 60 round steel BB magazine with a dual 12 gram CO2 system. You also get your choice of shooting either in semi auto or full auto at up to 400 fps. Personally the Umarex Legends MP was the most interesting Airgun at the show this year for me and I really think it is going to be a hit!

Umarex SA10 Blowback Pellet and BB CO2 Pistol:

Another interesting product from Umarex this year was the SA10, I am not really sure what it is exactly styled after, it’s more of a futuristic looking gun with slide venting and a thread barrel for adding a mock suppressor or compensator. What appealed to me most about the Umarex SA10 was the new magazine design that incorporates a full size drop out metal magazine with 4 rotary 8 round magazines that can be loaded with either pellets or BB’s. When you empty one 8 shot magazine you simply drop the entire mag out and swap your empty 8 shot rotary magazine for a full one. The SA10 has a nice weight of around 2 pounds and shoots up to 426 fps.

Sig Sauer ASP P320 CO2 Blowback Pellet Pistol:

Sig Sauer introduced their new Sig Sauer ASP P320 CO2 Pellet Pistol this year that will be replacing the P250. Like the P250 the Sig P320 has a metal slide and polymer frame but instead of a double sided 16 shot rotary magazine, the Sig ASP P320 has a newly designed and very unique 30 round belt fed magazine. That’s nearly double the capacity without having to flip the magazine around part way through shooting. It’s great to see innovations like this happening in the airgun market.

Crosman Remington 1875 Shell Loading CO2 Pellet and BB Revolver:

Crosman introduced their own Single Action Old West Revolver this year in the form of the Remington 1875. Like the super popular Umarex Single Action Army Revolvers, the Remington 1875 is also shell loading and uses 12 gram CO2. You have the option of shooting either Pellets or BB’s out of its smooth bore barrel. I expect the Crosman Remington 1875 Shell Loading Revolver to be another popular Old West Airgun Revolver.

Crosman PSM45 Single Shot Spring Powered BB Pistol:

The Crosman PSM45 at first glance may not seem that interesting, after all it’s all plastic on the outside and only shoots about 200 fps! On the plus side it kind of looks like a Glock and we all know how hard it is to find airguns these days that resemble a Glock. I also like the fact that there is no need for any CO2, and most springers out there look like springers while the Crosman PSM45 looks like a real semi auto pistol. The PSM45 even has pretty decent weight to it since there are lots of internal metal parts and a full size drop out metal magazine which was a real surprise in such an entry level low cost pistol. If you’re looking for a fun inexpensive replica plinker than the Crosman PSM45 should fit the bill. On a side not the PSM45 would also make a really great low cost prop since the slide does work and it has that full size drop out magazine!

ASG Dan Wesson 715 2.5 and 4 inch Shell Loading CO2 Revolvers:

The ASG Dan Wesson Revolver has always been a popular choice, and then the Dan Wesson 715 came out improving on the design by adding extra weight and smoothing out the mechanics. How do you top that? Well by giving us some more options like barrel lengths. You now have your choice of a 2.5, 4 or 6 inch barrel for the Dan Wesson 715 and of course you will be able to buy your 715 pick in 4.5mm Steel BB, 6mm Plastic Airsoft or .177 Caliber Pellet ammunition versions. My personal choice may be the 4 inch Dan Wesson 715 since it has the addition of an integrated accessory rail machined into the outer barrel for lasers or tach lights.

Gletcher M1944 Mosin Nogant CO2 BB Rifle:

The Gletcher M1944 Mosin Nogant CO2 BB Rifle is not a new replica gun this year but it has been a hard one to get your hands on. In fact up until SHOT Show 2017 I had never seen one in person and so the Gletcher M1944 is new to me. I was very impressed with the quality of the Gletcher M1944 Mosin Nogant, it has a lot of metal parts including the swing out bayonet and even the simulated wood stock looks like real wood. I even had to take a second look and ask before confirming that the stock is in fact plastic on the Gletcher M1944 Mosin Nogant. I am looking forward to reviewing this rifle in the future when I do finally get one!

Of course there where other interesting products at SHOT Show 2017 this year but those are the products that stood out the most for me. Again make sure to watch my full interview videos to find out more about all the new products at this years SHOT Show.

Another SHOT Show 2017 interview video, this interview is with Bob Li from ASG (Action Sport Games), Bob shares with me some updates to the super popular Dan Wesson 715 along with the reintroduced EVO Scorpion Inferno powered Airsoft Rifle. Bob finishes up with a new X9 Classic which is a Beretta M9 in 4.5mm Steel BB.

You may have thought the Dan Wesson 715 was already pretty much perfect as is so what could ASG to make it even better? How about different barrel lengths. ASG has introduce the Dan Wesson 715 in both a new 2.5 inch and 4 inch version. Both lengths will be hitting stores shortly and will come in .177 caliber pellet and 4.5mm steel BB options. 6mm Airsoft will be out later on. The 4 inch version also includes an integrated accessory rail machined into the outer barrel for those of you wanted to add items like lasers and tactical lights to your Dan Wesson 715.

Last year at SHOT Show ASG introduced the EVO CZ Scorpion 3 A1 Inferno powered Airsoft Rifle but is again reintroducing it this year since they decided to take their time and get it perfect before releasing it in stores this March. The EVO CZ Scorpion 3 A1 is Inferno powered using an HPA system with a custom chip set that allows for a three round burst option an empty magazine detection.

ASG has sourced out not just any 4.5mm Steel BB shooting M9, they are actually getting their new ASG X9 Classic built by KJWorks. KJWorks is known for their Airsoft guns and I have reviewed several of them to date. If you have been looking for a KJWorks M9 but would prefer it to be in 4.5mm Steel BB then the new X9 Classic 4.5mm Steel BB KJWorks M9 exclusive to ASG is where you can get one!

Type: Airsoft Pistol.

Manufacturer:Umarex.

Model:Walther P99 Compact

Materials: Mostly plastic with some metal parts.

Weight: .5 pounds (227 Grams).

Barrel: 3 inches, metal non-rifled with internal Hop-up.

Propulsion: Spring Piston.

Action: Single Shot, Single Action Only.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 11 shot full size drop out magazine with 60 round reservoir.

FPS: 280 using .12 gram BB's.

Trigger Pull: The single action only trigger pull on the Umarex P99 Compact Clear Spring Airsoft Gun is a bit heavier than I expected since generally speaking single action triggers simply just need to release the hammer or striker. There is a little bit of take-up initially but then the release is fairly crisp, just a tad firm but since this is not an action shooter and a full rack of the slide is required to pre charge the internal spring, having a heavier trigger pull is not a big deal and did not seem to effect my accuracy in any way.

Accuracy: I didn't get a lot of shooting time with the Umarex P99 Compact Clear Spring Airsoft Gun but I can say it seemed to be shoot fairly accurately. I tested it out shooting on a paper target from 20 feet back using a non rested standing position. The Umarex P99 Compact Clear Spring Airsoft Gun did shoot a bit high and to the left but my 10 shot grouping was within 1.75 inches with the exception of one stray that shot a little more to the right. I was using .20 gram BB's but they did seem to get to the target pretty quickly and penetrate the paper fairly well. I would say they were traveling well over 200 fps.

Build Quality: The Umarex P99 Compact Clear Spring Airsoft Gun is about a $25 gun so you can't really expect too much in terms of quality materials but that said, the gun does feel solid and well put together. I had no issues shooing it and for the price you should get plenty of good use out of it.

Realism: The Umarex P99 Compact Clear Spring Airsoft Gun is realistic in terms of its shape, operation and even the Walther P99 licensing and trade marks. But as is expected being a clear plastic gun it falls short in terms of feeling and looking the part of a real gun. But that's kind of the point here, this gun is supposed to clearly look like and Airsoft gun and not a real gun including the orange red tip.

Purchase it from: The Replica Airguns Store

Pros:

• Super low cost and even come with an extra mag and some starter BB’s.

• Full size drop out mags are nice.

• All the parts feel pretty tight, does not feel hokey, even has some metal parts where they are needed.

• Has a rail for accessories.

• No CO2 required, just your Airsoft BB’s.

• Walther licensing and Trademarks.

• Slide stays back when out of BB’s.

• Has internal Hop-up.

• Has a floating barrel like the real steel version would.

• Makes a good starter pistol for someone getting into the hobby that may not want a gun that looks too realistic.

Cons:

• Is kind of on the light side at about half a pound.

• The single action trigger is a bit heavy but works fine, you're not going to be shooting rapped fire with this one anyway.

• Being a clear gun obviously takes away from the realism but that is the point of this gun so as not be confused with a real gun.

• Shoots a bit high and to the left.

Comments:

Right from the get go I was not expecting much from the Umarex P99 Compact Clear Spring Airsoft Gunbeing a bit of an Airgun snob and personally tending to stay away from the like of these clear plastic non-blowback super low cost Airsoft pistols. But after playing around with it for a bit I could really see how a first time Airsoft buyer could really enjoy the Umarex P99 Compact Clear Spring Airsoft Gun. It shoots just fine and costs next to nothing to buy and shoot. And I know there are many younger folks that watch my video reviews and perhaps their parents may be sitting on the fence about allowing them to buy an Airsoft gun out of fear that so many of them look so real. The Umarex P99 Compact Clear Spring Airsoft Gun clearly looks like an Airsoft gun which makes it pretty hard to get in trouble with yet you can still enjoy the Airsoft shooting experience without freaking your parents out!

My Vimeo Video Review for the Umarex P99 Compact Clear Spring Airsoft Gun:

Buy the Umarex P99 Compact Clear Spring Airsoft Gun in Canada

Buy the Umarex P99 Compact Clear Spring Airsoft Gun in the US

Content Link Block

Select a page and create a visual link to it. Learn more

Replica Airguns Blog | Airsoft, Pellet, & BB Gun Reviews

This Vimeo Unboxing Preview Video focuses on two AR M4 styled AEG Airsoft Rifles. The G&G CM16 Rifles are all pretty much the same other than the barrel lengths and come in the following versions, the CM16 SRS, CM16 SRL and CM16 SRXL. I also showcase the Umarex HK M27 which is distributed by Umarex but made by VFC which is knwo for their high quality products. I will be following up this Preview Unboxing Video with individual more detailed Review videos for each AEG AR M4 rifle.

G&G CM16 SRS Black AEG Airsoft Rifle

• Type: Airsoft Rifle

• Manufacturer: G&G Armament

• Model: CM16 SRS

• Materials: Metal and Polymer Construction

• Weight: 4.97 Pounds

• Barrel:  8.1 inches

• Propulsion: Electric AEG

• Action:  Semi, Full Auto, 3-Round Burst Modes

• Ammunition Type: 6mm Plastic Airsoft BBs

• Ammunition Capacity: 300 rounds

• FPS: 420 fps

Buy G&G CM16 SRL Black AEG Airsoft Rifle in Canada

G&G CM16 SRL Black AEG Airsoft Rifle

• Type: Airsoft Rifle

• Manufacturer: G&G Armament

• Model: CM16 SRS

• Materials: Metal and Polymer Construction

• Weight: 5.1 Pounds

• Barrel:  10.2 inches

• Propulsion: Electric AEG

• Action:  Semi, Full Auto, 3-Round Burst Modes

• Ammunition Type: 6mm Plastic Airsoft BBs

• Ammunition Capacity: 300 rounds

• FPS: 420+ fps

Buy G&G CM16 SRL Black AEG Airsoft Rifle in Canada

G&G CM16 SRXL Black AEG Airsoft Rifle

• Type: Airsoft Rifle

• Manufacturer: G&G Armament

• Model: CM16 SRS

• Materials: Metal and Polymer Construction

• Weight: 5.24 Pounds

• Barrel:  13 inches

• Propulsion: Electric AEG

• Action:  Semi, Full Auto, 3-Round Burst Modes

• Ammunition Type: 6mm Plastic Airsoft BBs

• Ammunition Capacity: 300 rounds

• FPS: 420+ fps

Buy G&G CM16 SRXL Black AEG Airsoft Rifle in Canada

Umarex H&K M27 Black AEG Airsoft Rifle

• Type: Airsoft Rifle

• Manufacturer: Umarex VFC

• Model: H&K M27

• Materials: Metal and Polymer Construction

• Weight: 6.7 Pounds

• Barrel:  14.2 inches

• Propulsion: Electric AEG

• Action:  Semi, Full Auto

• Ammunition Type: 6mm Plastic Airsoft BBs

• Ammunition Capacity: 320 rounds

• FPS: 400 fps

Buy Umarex H&K M27 Black AEG Airsoft Rifle In Canada

Buy Umarex H&K M27 Black AEG Airsoft Rifle in the US

This Unboxing Preview Video focuses on three Bullpup designed AEG Airsoft Rifles. The two Steyr Aug Bullpups are distributed through ASG while the IWI Tavor 21 is distributed via Umarex. In this Unboxing Preveiw video I take each gun out of the box and go over some basic specification and show you around each AEG Bullpup Rifle a little bit. I will be following up this Preview Unboxing Video with individual more detailed Review videos for each AEG rifle.

Here are some of the basic Specifications for each AEG Airsoft Rifle.

AEG Steyr AUG A3 MP AEG Aisoft Bullpup Rifle

• Type: Airsoft Bullpup Rifle

• Manufacturer: ASG

• Model: Steyr AUG A3 MP

• Materials: Metal and Polymer

• Weight: 3.85 kg (8.5 pounds) 

• Barrel: 21.2 mm (0.83 inches)

• Power Source: Electric AEG

• Action: Semi & Full Automatic

• Ammo Type: 6mm Plastic Airsoft BBs

• Ammo Capacity: 300 rounds

• FPS: 394

Buy AEG Steyr AUG A3 MP AEG Airsoft Bullpup Rifle in Canada

Buy AEG Steyr AUG A3 MP AEG Airsoft Bullpup Rifle in the US

ASG Steyr AUG A2 Tan AEG Rifle

• Type: Airsoft Bullpup Rifle

• Manufacturer: ASG

• Model: Steyr AUG

• Materials: Polymer with Metal Internals

• Weight: 3.39 kg (7.5 pounds)

• Length: 805 mm (31.7 inches)

• Power Source: Electric AEG

• Action: Semi & Full Automatic

• Ammo Type: 6mm Airsoft BBs

• Ammo Capacity: 300 rounds

• FPS: 394

Buy ASG Steyr AUG A2 Tan AEG Airsoft Bullpup Rifle in Canada

Umarex IWI Elite Tavor 21 Airsoft AEG Bullpup Rifle

• Type: Airsoft Bullpup Rifle

• Manufacturer: Umarex

• Model: Steyr AUG

• Materials: Polymer with Metal Internals

• Weight: 3.5 kg (7.71 pounds)

• Length: 755 mm (29.7 inches)

• Power Source: Electric AEG

• Action: Semi & Full Automatic

• Ammo Type: 6mm Airsoft BBs

• Ammo Capacity: 300 rounds

• FPS: 395

It's been a great year for Replica Airguns and I wanted to share with everyone some of my favorites that I reviewed this year. In this Vimeo Video I show some of my top Replica Airgun picks for 2016 and talk a little bit about each one and what I like about it.

Here is a list of the Replica Airguns in this lineup:

• ASG Dan Wesson 715 CO2 Revolver - Comes in 4.5mm Steel BB, 6mm Plastic Airsoft & .177 Pellet.

• Umarex Colt Combat Vet CO2 Blowback 1911 - 4.5mm Steel BB.

• Sig Sauer MPX ASP CO2 Rifle - .177 Pellet.

• Sig Sauer ASP P226 CO2 Blowback Pistol - .177 Pellets.

• Air Venturi ISSC M22 CO2 Blowback Pistol - 4.5mm Steel BB.

• KJWorks KC-02 V2 Ruger 10/22 GBB Rifle - 6mm Plastic Airsoft.

• Umarex S&W M&P40 CO2 Blowback Pistol - 4.5mm Steel BB.

One of the most common types of question I get on my Replica Airguns YouTube channel has to be something like… Why is my Airgun not working? Most of the time the amount of info about the problem is limited to something like… “It was working yesterday but now it’s not working anymore” or something like “when I pull the trigger nothing happens”. My personal favorite is… “I took my gun apart and now it doesn’t work!”

I just made a similar video for Blank Guns and as I said in that video, trying to trouble shoot a mechanical or technical problem over the internet is very difficult, this goes for cars, guns, computers or what have you…

In this Why is My CO2 Airgun Not Working video I will however cover some of the more common and obvious problems I have seen relating to why a CO2 Airgun may not be working properly. I really don’t get a lot of questions about Spring Piston or Pump Airguns so I will be focusing on CO2 Airguns in this video. There will be a lot of crossover with CO2 Airsoft guns so this video may be helpful for some of you Airsofters out there

First let’s get the super obvious stuff out of the way! 

• Did you put a new CO2 cartridge in it and is it pierced all the way?

• Did you load BB’s or Pellets into the Airguns magazine and is the magazine in the gun correctly?

• Is the safety off?

• If the gun is a blowback semi auto single action Airgun then did you pull the slide back prior to the first shot?

CO2 Related Problems:

Not all CO2 cartridges are created equal, they often have slightly different shaped nubs on them and some brands will work better than others in different Airguns. If the shape of the CO2 nub does not fit properly into the valve area then it may not pierce or it could pierce but then not allow you to tighten it all the way losing all the CO2 in the process. If the CO2 is coming form the airguns handle to CO2 Valve area then this is an indication that your problem is related to the area where the CO2 enters the airgun.

There is a seal where the CO2 cartridge buts up to the valve, this seal can be damaged or even deformed from usage or even leaving your CO2 in the gun for too long. The outside CO2 Valve seal can also take the shape of a specific CO2 nub so when you use a different brand CO2 the seal may not properly make concat with the new CO2 type you are using, again causing leaking or even the total loss of all your CO2. Watch my YouTube video on “How to Fix Leaking CO2 in an Airgun”.

CO2 Valve Related Problems:

Again, make sure that Outside CO2 Valve Seal is in good condition and any leaking is not being caused by this problem, if you have checked the Out Side Seal and everything is OK with it then perhaps there is a problem with the CO2 valve?

One indication that your CO2 Valve might be the culprit is the total loss of all your CO2 when you try to insert and tighten a new CO2 Cartridge. Usually all the CO2 will exit the barrel, not the handle or valve area. What may be happening is the valve is stuck open or the internal seal is broken or deformed. If this is the case you will have to remove the valve and have a look inside, this is a lot easier on CO2 airguns that have the CO2 valve in the magazine, if the CO2 valve is in the actual Airguns then a lot more disassembly may be required and I would recommend an Airgun technician take care of this for you.

If the gavel is in the magazine then you will have to unscrew it, you may require a special tool for this? Once the valve is out of the magazine  take a look inside and examine the internal seal, also look for any bits of metal shavings as they can disrupt the action of the valve causing leaking. Give the inside of the valve a good clean and then lubricate it with some silence spray. hopefully that fixes your problem!

BB’s getting Stuck in the Blowback Gas Tube:

I have actually made a dedicated video for this problem so I will put a link to it in the description of this video. The main reason people may have this problem is because we all like to rack that slide on our full blowback Airguns, but if you have a fully loaded magazine then each time you reach that slide without shooting the gun, you are inadvertently trying to load another BB into the breach area, the breach is only designed to hold one BB at a time so after a few racks of the slide the newly loaded have no place to go but into the Gas Tube where they can get stuck and cause having to the operation of your Full Blowback CO2 Airgun.

BB’s Rolling Out of the Barrel of Your CO2 Airgun:

This is not actually a fault of the gun but happens because of the way the gun is designed. This situation can happen with certain CO2 Airguns when the gun user pulls the trigger really slowly while the gun is point slightly in a downward position. What is actually happening is the first part of the trigger is made to draw a BB from the magazine into the breach of the gun. If the barrel of the gun does not have a rubber hop-up stopper in it then the BB is free to roll down the barrel and out of the gun. How do you fix this problem? Be more committed to your trigger pull and or shoot at a target that is not so low. Perhaps place your targets slightly higher than the gun so the barrel is not pointing down, especially if you like to take your time with the trigger :)

A Little Maintenance Can Go a Long Way!

Sometimes a good cleans is all you need to do to get things working as they should, again I have already made video Tutorial Showing “How to Clean Airguns and Blank Guns”.

What about stuff like My Airgun is jammed or my trigger is stuck or some random part fell out of my gun?

There is only so much I can cover in this video, most other problems are going to get a bit more complicated to fix and I suggest if your Airgun is not working and the suggestions I have made in this video do not solve your problem, then consider taking your gun into a gun tech.

First off I want to say it’s hard to trouble shoot technical or mechanical problems over the internet regardless of if ithas to do with guns, cars, computers or pretty much anything where unless you are there in person it’s really hard to figure out the problem.

But I will attempt to address some of the more common issues why a blank gun may not be functioning properly.

Why is my Semi Auto Blank Gun Not Cycling or Ejecting Shells?

One very common reason a blank gun may not be cycling the shells properly is because the owner has removed the barrel restrictor plug. People usually do this to make the barrel opening look more realistic but the barrel restrictor is a necessary component to increase the back pressure allowing the slide to cycle fully to the rear position so it can eject and pickup a new shell.

The blanks you are using may not have enough gun powder in them. Some blank guns require banks with more gun powder than others, again this additional internal pressure forces the slide all the way back, if the blank does not have enough gun powder in it then only a partial slide motion happens and so the discharged shell may not eject properly, in this case the user would have to clear the blank gun manually so another shell can then be picked up and loaded into the breach.

If your blank guns is dirty or not lubricated then it may act sluggish again restricting the full movement of the slide which will effect correct operation. Make sure to thoroughly clean and lubricate your blank gun, that may be a quick fix for you!

You may have a faulty extractor? The extractor is like a hook that grabs the discharged shell while the slide is in the reward position pulling or extracting the shell out of the breach. If the extractor is worn or broken then the empty shell will not be ejected from the breach so when a new shell is picked up from the magazine it has nowhere to go and usually you will get a jam-up in the ejection port area.

One final situation that can cause your blank gun to not cycle properly is to strong of a slide spring, some blank guns out of the box just come with a really heavy slide spring, so much so that even blanks with lots of gunpowder in them are still not strong enough to make the slide operate full motion. Your only option here would be to replace the heavy slide spring with a lighter one.

Why Are My Blanks Not Firing?

This is a situation where you pull the trigger and nothing happens. Lets get the obvious causes right out of the way here… Did you put blanks in your gun and are they new blanks? Did you chamber the first round in your semi auto pistol?

So now that that’s out of the way let’s look at some other reasons why your blank gun may not be firing a blank. Perhaps the firing pin is broken? Most blank guns are not made out of carbon steel and even the firing pins can be lesser quality than what you would find in a real gun so blank guns are more prone to breaking than real guns. I have seen broken firing pins in blank guns first hand so make sure to check the firing pin and that it is fully operational.

Try changing up your blanks to another brand? Again blank gun ammunition is not made to the same higher standards that real firearm ammo is made and some primers may require a little more pressure than your gun is providing. Even with real guns an ammo change may help the gun operate better.

Why is the Trigger or Hammer Not Operating Properly?

I have come across blank guns where there are mechanical problems in the trigger and hammer areas, you may be able to address this yourself but I would recommend taking your blank gun to a gunsmith since you will have to take the gun pretty much full apart to fix a problem in the trigger and hammer areas.

Of course make sure your gun is clean and lubricated, this can help a lot with the mechanical areas of your blank gun.

One problem I saw with a few EKOL Special 99’s was specifically with the single action potion of the trigger, when I would pull the hammer back it would not lock back and the hammer would often slip and fire randomly, this is rather dangerous. When I took the gun apart I found that the table top or step that the trigger was supposed to catch on was worn down on the edge so it would simply slip off. I was able to fix this by filing a new edge on the step area. Again this can happen because blank guns are not made out of as high quality metal materials as real guns.

Why does the Flame Come out the Top of My Blank Gun and Not the Front?

If you find that the flame or discharge comes out of the top of your blank gun and not the barrel, this usually does not mean anything is wrong with your blank gun. All it means is you own a top venting blank gun and not a front firing blank gun. In some countries front firing blank guns are not allowed but front venting blank guns are. The same may also be reversed in some countries, for instance here in Canada we can only import front firing blank guns with flare adaptors since our blank guns are imported under the assumption that they are to be used as signaling or flare devices.

Can I Convert my Top Venting Blank Gun into a Front Venting Blank Gun?

I really don't recommend altering a blank gun in any way as it may be a violation of your local laws and it could cause the blank gun to malfunction in a very bad way causing serious injury or even death!

In theory I suppose it may be possible to convert your Top Venting Blank Gun into a Front Venting Blank Gun but again you would need to allow for just the right amount of back pressure so a wide open barrel would not work unless it was a revolver. You can not simply remove the red plug and bingo you have a front firing blank gun because in most cases the barrel will be completely plugged in the frontal region. Not only would you need to drill out the plugged portion of the barrel but you would also have to somehow fill in the top venting area and again makes sure to allow for just enough back pressure to cycle the slide back and forth.

Hopefully this has helped some of you with blank gun issues. If you’re looking for a blank gun make sure to come down to www.ReplicaAirguns.ca and www.ReplicaAirguns.us and have a look in our blank gun area of our online stores.