Another nice example of a lower cost Airsoft gun from KWC, this KWC (Taurus PT24) 24/7 in 6mm Airsoft is very similar in construction to the KWC SP2022 with an all metal slide and full size drop out magazine. The 24/7 has a nice smooth double action trigger and comes with rubberized grips.
This is a KWC distributed Airsoft pistol, this non licenced version is a very detailed replica of the real steel Taurus PT24. The KWC 24/7 features a metal slide and full size drop out all metal magazine giving this Airsoft pistol even more realism! It has a nice light double action trigger and working magazine release and safety.
I have been selling the Cybergun 4.5mm Steel BB version of this fine Sig Sauer copy for some time now (that is when I have it in stock) The KWC Sig Suer SP2022 is pretty much the exact same gun but chambered in 6mm Airsoft and without andy licensing or branding on the metal slide. It really is a very nice low cost Airsoft gun with full metal drop free magazine and metal slide.
This is a KWC distributed Airsoft pistol, this non licenced Sig Sauer SP2022 is a very detailed replica of the real steel Sig Sauer SP2022 Sig Pro used by the DEA and many other law enforcement agencies worldwide. The KWC Sig Sauer SP2022 features a metal slide and full size drop out all metal magazine giving this Airsoft pistol even more realism! It has a very light double action trigger and working magazine release and safety.
Materials: Mostly metal with minimal plastic parts.
Weight: 2.1 pounds.
Barrel: 6.9 inches, metal rifled.
Propulsion: Spring-piston-operated.
Action: Single shot.
Ammunition Type: .177 & .22 caliber pellets.
Ammunition Capacity: 1 pellet.
FPS: 400-499.
Trigger Pull: The trigger pull on the Webley Tempest is very good, being that it is single action, there is next to no take-up and the pull itself is very light, yet not so light that you would accidentally shoot the gun. This helps a lot with accuracy. And to top it off, you can even adjust the trigger pull weight to your liking from 3-5 pounds!
Accuracy: Being that the Webley Tempest is a spring piston design, there is a noticeable amount of felt recoil when the spring snaps backwards, and I say backwards because it compress towards the front of the gun. With many spring piston rifles the spring snaps forwards almost giving a reverse recoil effect. The Webley Tempest recoil hits you in a familiar direction which made the airgun feel a bit more natural and I believe helped me to get a nice 1.5 inch 5 shot grouping from 30 feet out in a semi rested position. I also got a 400 fps average rating form my .22 caliber 11.9 grain RWS pellets which took me right up to the Canadian limit of 5.7 Joules to stay just within the limits of the uncontrolled firearm status for an airgun. FEW!
Build Quality: Build quality is very good, most of the gun is all metal with a few plastic parts, basically the nose cap and hand grips, everything else is metal on the Tempest. The Webley Tempest has a nice compact size for a spring piston design and has a nice weight to it making it feel very solid but not overly heavy. I do have to say the cocking effort is very heavy and you will have to try a few different techniques until you find a way that works for you.
Realism: This is not a replica airgun so to speak of but the basic pistol grips and trigger are designed to replicate a revolver more than anything. The Tempest is very unique and its basic design roots go back to the 1920's.
Fully adjustable rear sight for windage and elevation.
Small and compact yet very effective power.
Trigger pull adjustable from 3-5 pounds.
Cons:
If you're left handed the grips will not be as comfortable for you.
Sight adjustment will take some time to get right.
Spring recoil takes some getting used to so practice - practice - practice.
Cocking effort especially on the .22 caliber model is very heavy.
Comments:
Some people may qualify the fact that this "new version" is now made in Turkey but with that said I have been selling the Turkish made Webley Alecto for some time now and it has been one of my most trouble free airguns in the web-store. The Tempest looks to me to be just as well made and a nice perk with the Turkish made Tempest is its jump in velocity with the .22 actually hitting 400 fps and the .177 getting right around 500 fps, not bad at all for a fairly short barreled pistol. I also really like the small size this airgun has, it's no larger or heavier than say a Beretta 92 yet somehow it has to cram all the mechanics for the spring piston design into it and still get good performance. The only real reason I would not recommend this gun to some people is if you are of slight build or perhaps have some hand or wrist problems because it does take some effort to cock this gun, if this is a factor for you, you may want to go with the .177 caliber version as it does have a lighter cocking effort.
Action: Blowback, Single action only on KP-07 - Single/Double action on KP-02 & Elite 1A
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 20/22/20 rounds.
FPS: 366+ fps.
Trigger Pull: The trigger pull on all of these KJWorks Airsoft guns is very nice in both single and double action, The KP-07's true single action only 1911 trigger is a beauty, with no take up at all and a very light and smooth release. The Beretta Elite 1A is the next best with a surprisingly light weight double action trigger. All of these guns will be shooting primarily in single action as the blowback precooks the hammer with each shot.
Accuracy: I shot all of these fine KJWorks Airsoft guns from 20 feet out in semi rested position and got very similar results. I was able to place 10 rounds in a 2 to 2.5 inch grouping for all guns, with the KP-07 1911 shooting the most well centered. The Beretta Elite 1A shot well centered also but just a hair under center mass while the KP-02 seemed to shoot low but could be adjusted to shoot higher by increasing the hopup. All three KJWorks Airsoft pistols got right around the 330-350 fps mark (5 shot average chrony testing) with the KP-7 1911 and Elite 1A Beretta hitting the higher end and the KP-02 Sig P229 getting right around 330fps. All three KJWorks Blowback Airsoft guns should be able to hit 366+fps in the right shooting conditions.
Build Quality: I was extremely impressed with the build quality of these KJWorks Airsoft guns, the fit and finish is the best I have seen on any of my guns including Airguns also. Even after shooting several magazines worth of BB's, the painted metal friction areas did not seem to show nearly as much wear as some of my other blowback guns. The tolerances between the moving parts like the slide and frame are very tight showing excellent workmanship and machining with these KJWorks Airsoft guns.
Realism: All of these KJWorks 6mm Airsoft pistols are based on real steal versions of the same guns (KP-02 is a Sig Sauer P229 copy, the KP-07 is a Colt 1911 copy and the Elite 1A is a Beretta Copy). They are very good replicas even though the KP-02 and KP-07 do not have any specific licensing on them. The Elite 1A does have licensing which is a plus. The only negative thing I can think of is the fact that the KP-02 has the rather unusual CO2 magazine that sticks out of the bottom of the handle that is not at all like a real P229 magazine. I do believe you can find a GBB magazine that would be much more in line with the real steel version of this magazine.
All metal guns with good overall realistic weights.
Very heavy blowback on all guns, especially the KP-07 1911
Excellent fit and finish - best I have seen.
Nice mid range fps - great for on the field.
Very consistent accuracy for all KJWorks Airsoft guns.
Very believable replicas of the real steel versions.
Cons:
KP-2 and KP-07 did not have official licensing.
All seem to go through CO2/Gas fairly fast.
KP-02 had a rather strange looking CO2 magazine.
KP-02 slide did not lock back after last shot, may be due to CO2 magazine configuration.
Comments:
I guess you get what you pay for, these KJWorks Airsoft guns do fetch a bit higher price but when you take them out of the box and really look at them closely you can see why, they are pretty much flawless and the fit and tolerances are very good with very little play in the mechanical parts. Shooting these guns is just as wonderful, they all worked very well and got consistent accuracy and fps between shots. There where no ammo loading problems and no unexpected behaviors with any of these Airsoft pistols. If you can afford to pay that little bit more for one of these very high quality KJWorks Blowback Airsoft guns, you will not be let down!
Here is a short video update along with a few photos of my KWC and Umarex Airsoft Pistols recently added to the Canada Replica Airguns Store. The models showcased are the KWC M1911 & KWC M92 (PT99) along with the Umarex Walther P99. All of these pistols use 6mm plastic Airsoft BB's, shoot over 366 fps using CO2 and have blowback operation.
Watch my Vimeo Update Video on these three Blowback Airsoft Pistols:
Last but not least for now, just added to the Canada Replica Airguns Store - the KWC M92 (PT99) CO2 Blowback Airsoft Pistol.
The KWC M92 (PT99) is essentially is the Airsoft KWC version of the Cybergun GSG 92 without any branding and also in 6mm Airsoft caliber. And it comes already to shoot in either semi or full auto so no modifications required!
The KWC M92 PT99 features a full size drop out metal magazine that holds both the 6mm Plastic Airsoft BB's and the CO2 cartridge. It features a working slide with realistic blowback operation and can be fully field stripped just like the actual sidearm.
The KWC M1911 is essentially is the Airsoft KWC version of the Cybergun Tanfoglio Witness 1911 without any branding and also in 6mm Airsoft caliber.
The KWC M1911 features a full size drop out metal magazine that holds both the 6mm Plastic Airsoft BB's and the CO2 cartridge. It features a working slide with realistic blowback operation and can be fully field stripped just like the actual 1911 sidearm.
The Umarex Walther P99, one of Walther's most popular semi auto pistols. This CO2 powered Airsoft version captures the realism with its BLOWBACK, semi-automatic action and full metal slide.
A 12g CO2 cylinder loads in the back of the grip and the Airsoft BB magazine releases with the push of a realistic magazine release lever. The recoil action made live by the power of CO2 kicks the slide back giving you that oh-so-realistic feel. A great pistol for Target, Airsoft Games and owners of the P99 or similar firearms.
6mm Airsoft Plastic BB's
CO2 Powered
15 round drop out metal magazine
Up to 380 fps
1.5 pounds
7.25 inch length
Double action only
Blowback
Metal slide - polymer frame
Tactical Rail Mount
Fully Licensed
Comes with red tip (Can be removed with a bit of work ;)
Trigger Pull: The trigger pull on the Umarex HK P30 is fairly nice in single action mode while shooting in double action will give your trigger finger a bit of a workout. You can fire off pretty quick in double action but not as fast as with airguns that have a lighter double action.
Accuracy: I shot the Umarex HK P30 at a target from 20 feet away in a semi rested position using both pellets and BB's to see how both ammunitions worked. I was also interested to see if pellets would perform better than the BB's? Using 6.9 grain RWS pellets I was able to get just over a one inch grouping close to the center of the target and also averaging 363 fps with my 5 shot chronograph testing. BB's did get higher chronograph results as expected with an averaged 415 fps but grouped a bit larger at just under two inches.
Build Quality: This is an extremely well made metal and polymer air pistol with great fit and finish and a nice dense 1.7 pound weight to it. It's another "made in Germany" Umarex that uses the 8 shot rotary pellet magazines but with teh added ability to shoot BB's loaded in the full size drop out magazine? There is plastic on this air pistol but it's in the same places you would find it on the real steel HK P30. The balance, ergonomics and feel this gun offers is as good as it gets.
Realism:The Umarex HK P30 is a licensed replica of the real HK P30 semi auto pistol. It looks almost exactly like the real steel version with the exception of the break in the slide where the rotary magazine is accessible and the smaller .177 caliber muzzle opening.
Rifled barrel for Pellets but can also shoot BB's.
Full H&K Licensing.
German made!
Comes in a nice hard-shell case.
Full size drop out magazine that holds BB's and CO2.
Adjustable rear sight for windage.
Double and Single Action trigger.
Rail for adding accessories.
Very nice holding gun, good ball acne and weight.
Good accuracy and power.
Cons:
More expensive then many entry level guns but much higher quality.
Barrel is not recessed at all.
Did not get a lot of shots form a CO2.
Trigger is a bit tuff in double action mode.
Comments:
I have had a lot of people ask me to review this air pistol and to be honest I thought it would be just like the other Umarex German made rotary magazine pellet shooters, and that's not a bad thing! But it is different then the rest as it is the only one that also has the ability to shoot BB's by loading up the inline drop out magazine with 15 BB's and fitting the BB adapter where the rotary magazine would normally go. I also really like the look and feel of this gun. It is the perfect size and weight, not too big or small and not to heavy or light. I would really lie to get my hands on the real steel HK P30 to see if it has similar characteristics? If you want the best of both worlds, an accurate CO2 pellet pistol and an action shooting high capacity BB shooter, you can have it all with the HK P30.
Trigger Pull: The trigger pull for both KWC blowback single action pistols is very good, the Desert Eagle is a bit better with less play and a lighter pull while the Sigma SW40F still feels very good but has a little bit more take up and a slight bit more pull required.
Accuracy: I shot both guns from 20 feet out in semi rested position and got similar results. I was able to place 10 rounds in a 2.5 to 3 inch group and both guns shot well centered. I have full confidence that I could easily hit a man sized target from 50 feet away. Both KWC Airsoft pistols got right around 400 fps (5 shot average chrony testing) with the Desert Eagle only 10 fps higher than the Sigma SW40F and this was using .20 gram plastic Airsoft BB's.
Build Quality: The build quality for both guns is pretty much the same, both have a metal slide and barrel with a polymer frame and plastic grips, the Sigma SW40F had a plastic magazine release and trigger while the Desert Eagle used metal in these parts. The KWC Sigma SW40F seemed to wear a bit better as the painted finish seemed more durable. I found the metal on metal areas on the Desert Eagle where losing the paint and also in some of the high spots. Over all the guns worked very well and had good fit and finish.
Realism: The KWC Desert Eagle .50 and Sigma SW40F are very accurate replicas of their real steel counterparts, with the Desert Eagle also having the full licensing on it for added authenticity. The workings of both Airsoft guns are pretty much just like a real gun with full size drop out magazines and very heavy full blowback operation. The slides on each gun give a nice metallic sound when operating.
Very believable replicas of the real steel versions.
Cons:
Paint wear in high spots noticeable on the Desert Eagle.
Non adjustable sights.
Both go through CO2 fast.
No trademarks on the Sigma SW40F.
Comments:
It's wonderful to get these KWC blowback Airsoft guns here in Canada finally and have the ability to review them for everyone. They remind me a lot of the Cybergun 4.5mm Steel BB blowback pistols very much and this is probably because there are Airsoft version of these guns also distributed by KWC. Whether you want one of these very nice Airsoft pistols for plinking and target practice or to use in battle on the Airsoft field, either gun would make a great choice. I am really loving the fact that I now have more guns I can review and Airsoft or 4.5mm Steel BB it really doesn't matter to me, I'm having way to much fun to care ;)
Last update for the day, I am happy to announce that I have added two Gas Blowback Airsoft Rifles from WE to the Canada Replica Airguns Store. They are both fantastic guns that are the spitting image of their real steel counterparts and both have awesome blowback action and feel. Both rifles shoot in semi and full auto which is exhilarating!
Some more asked for blowback Airsoft pistols just added to the Canada Replica Airguns Store, these three are from KJWORKS and are very high quality for sure with excellent fit and finish on them!
I am super happy to announce a bunch of new Canada Store Products coming very soon. I have sourced out some Blowback Airsoft pistols and also a couple of GBB We Airsoft Rifles. (KJWorks: Elite 1A, KP-07, KP-02) (KWC: DE .50, SW40F) (RAM P99) (WE: G39C, M4 CQBR).
I am also adding some airgun pistols that I have not been able to find a supplier for here in Canada up until now, and I will also be adding them to the Canada Store shortly. (Umarex: Browning Buck Mark URX, XBG, Beretta 90two).
And of course the addition of some new accessories that I have been wanting to have listed in the Canada Store for some time now. (Daisy Zinc Coated BB's, Umarex CP99 - PPK - Rotary Magazines, Body Guard Mace Spray, Schrade Hand Cuffs)
So if your interested in any of these items then keep checking back, I will be adding them to the Canada Store as quick as I can - time permitting!
Trigger Pull: The trigger pull for both ROHM Le Petit and Little Joe blank revolvers in single action is nice and light. The action for both blank revolvers is very solid so cocking both guns requires a firm grip, the ROHM Le Petit also allows for double action shots and while it takes some force, the mechanics are very smooth and you can really feel the German quality in the hammer and trigger.
Accuracy: NA.
Build Quality: Even though both revolvers are made as blank/signal guns and do utilize scaled down metals (not high pressure gun steel), they are made very well and many of the internal mechanical parts, pins and screws are solid steel. The fit and finish is excellent and both guns worked flawlessly for me in my testing.
Realism: Both ROHM blank Revolvers are derivatives of similar real guns (Freedom Arms and RG 22) but again have been made from the ground up to be blank guns and can not be converted in any way shape or form to fire live ammo. The quality and feel is very believable, they also both fire out the front of the barrels and can shoot 15mm flares with the required flare adaptors attached.
Can also shoot 15mm flares with appropriate flare adaptor attached.
Come in gift box with cleaning rod and manuals (Le Petit RG-56 also comes with flare adaptor)
Cons:
Real wood grips would have been a nice touch but could be added later.
Little Joe does not come with a flare adaptor.
Comments:
We now have some blank guns that seem to be somewhat available in Canada... At least for now! And even though some of the other blank guns I was selling may have been more to the liking of the folks that where looking for a semi auto styled blank gun, the good news is both of these guns are very high quality and revolvers in general are very dependable. I also like the fact that both of the ROHM Blank Revolvers are fairly compact and so if you want to take them with you out on a hike or in the back country, they will not take up much room or add too much weight, but are still ready if required to scare off something bigger or more dangerous than you!
Trigger Pull: The trigger pull on the Umarex Beretta 90two is respectable in both single and double action, I found the 90two to be good shooting in both actions but preferred the feel of single action for more precise shooting. In double action you fire off a lot of shots quickly but the trigger is fairly long so you need to use a full pull or you may miss a shot here or there.
Accuracy: The results I got shooting my 8 round group from 20 feet out where excellent, coming in at just under a 1 inch group which is about as good as you can expect from a BB pistol of any quality. I also got well over the factory claimed 375 fps at an average of closer to 400 feet per second.
Build Quality: The Umarex Beretta 90two does use both plastic and metal in its build with an all metal slide and feels solid in the hands but I feel it would of felt even better if it had a another half pound to it or so. I had no problems with it in terms of function and the fit and finish where very good but there is always that feeling you get when you hold something with some weight to it in your hands. I do have to credit Umarex for working in a moveable slide and full size drop out magazine.
Realism: The Umarex Beretta 90 two is very realistic and includes Beretta licensing and markings throughout. As mentioned before, the moveable slide and full size drop out magazine along with the recessed barrel makes this air pistol version look very close to the real steel Beretta 90two. The only real giveaways are the exposed CO2 tab on the bottom of the magazine and the somewhat out of place safety switch on the right side of the gun.
Full size drop out magazine that holds BB's and CO2.
Full Beretta Licensing and markings.
Single and double action trigger.
Rail for adding accessories.
Above claimed fps with good usage of CO2 and excellent accuracy.
Cons:
Gun could be a bit heavier for added realism.
Non adjustable sights.
CO2 tab is plastic and exposed.
Comments:
Right off the bat I have to say the Umarex Beretta 90two is a step up from the Elite II, not that there is anything wrong with the Elite II, but given the choice I would go with the Beretta 90two as it's simply a more realistic version of the Beretta 92 with its working metal slide and full size drop out magazine that holds both the BB's and CO2 in it. On the performance side of things, the Umarex Beretta 90two also met or exceeded my expectations so the 90 two is not just built for show. If your a beretta fan looking for a realistic Beretta styled air gun and don't want to spend the big bucks for the all metal German made Umarex version, then the Beretta 90two is an excellent option to consider adding to your collection or even as a first time BB gun purchaser!
The video is just a quick preview but you get to see the guns up nice and close and at the end I also show off my 9mm bullet Casing Ear Bud Headphones and talk a bit about what I like about them.
Without further ado here is My YouTube video featuring the Thompson M1928 Submachine Gun, ICS SIG SG-551 SWAT and 9mm Bullet Digital Stereo Earbuds:
The Thompson M1928 Chicago Style 1928 Submachine Gun with Drum Magazine is an awesome weapon that delivers semi & fully automatic fire at outstanding velocities in the battlefield. This gun has a polished full metal body that recreates the awesome look and feel of a real Tommy gun. The gun features a metal gear box & steel bushings, a high-capacity 450 rd drum magazine and a shot velocity of 390-450 fps (using .20g BBs).
The front charging handle allows you to control the gun and an adjustable BAXS shooting system improves the accuracy of the gun when shooting from long distances. Own your enemies and order today! This rifle also Includes: 8.4 V 2000 mAh Ni-CD battery, 300 mah charger (6.5 hrs charge time), cleaning rod & manual.
We just got in a new Field ready Airsoft AEG rifle, the Cybergun ISC SG-551 SWAT version. Get in on our introductory sale price!
The Cybergun ICS SIG SG-551 SWAT offers hardcore performance in a lightweight and compact package. Manufactured in Taiwan under licensed from Cybergun this rifle features full SIG trademarks engraved into its receiver.
With a stamped aluminum upper receiver and cast lower, the SG-551 weighs over a pound less than a KWA M4 while retaining the same strength and rigidity. Complete with a fiber composite handguard and pistol grip you can feel the quality of this rifle as soon as you pick it up. Its side folding skeleton stock locks firmly into open and closed positions making this rifle highly versatile in both indoor and outdoor scenarios. It features a centrally located magazine release and ambidextrous selector levers allowing for left or right handed use. One cool thing about these ICS SIG series rifle is the functioning bolt catch. Pull the bolt back all of the way and it will lock open allowing you to easily adjust the rifle hop-up without needing a third hand to keep the bolt back. Once you are done just flip the bolt release and the bolt flies forward with a nice metallic ring. Other features include a folding trigger guard for use with thick gloves, adjustable front sight complete with hood and changeable long/close range sight post, rotary rear sight with four adjustable apertures as well as windage and elevation adjustments.
Its battery is housed in the handguard which has enough room to hold an 8.4v or 9.6v AK Stick Type battery.
Materials: Mostly metal with some plastic construction.
Weight: 2.3 pounds.
Barrel: 6 inches, non-rifled.
Propulsion: 12 gram CO2.
Action: Revolver, single & double actions.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 6 rounds.
FPS: 400fps.
Trigger Pull: The trigger pull on the Umarex Smith & Wesson 327 TRR8 is good in both single and double action, I wouldn't say it isn't supper light in either action but pretty decent overall. I found shooting in single action to be the most precise as the release point is instant. Shooting in double action was also fairly predictable.
Accuracy: The results I got shooting my 6 round group from a 20 foot out position where none other than impressive and I would have to say the 327 TRR8 shot the best group (just over a 1/2 inch) I have ever recorded using 4.5mm steel BB's. I'm not even sure if I have bettered these results using pellets from a rifled barreled pistol? This goes to show you how well an accurate BB gun can perform when shooting from a reasonable distance.
Build Quality: With the Umarex S&W 327 TRR8 Revolver being mostly metal, you would expect it to have a decent build quality and I am happy to say it does. Everything looked and fit well, the CO2 Revolver had good heft to it and I had absolutely no problems shooting this gun. My only real reservation is the plastic CO2 screw tab but so far with my other guns that have the same type of tabs, they are holding up well.
Realism:The Umarex Smith & Wesson 327 TRR8 is very realistic in terms of looking and operating as a revolver with it's brass shell casings you load juts like a real revolver, so yes it feels realistic and even looks a lot like a S&W 327 TRR8 to some degree. With that said, Umarex has taken some liberty on this one most likely because it is built off an existing airgun frame and to make it into a true 327 TRR8 replica would have required a complete redesign. I would have to say the Umarex S&W M&P R8 is actually a closer 327 TRR8 Replica than the gun reviewed in this video.
It's a revolver with actual shells! Gives you the feeling of loading and shooting a real revolver.
Almost all metal design.
Lots of detail in this gun, very well made, fit and finish is excellent.
Excellent power, accuracy and shots per CO2.
Adjustable fiber optic sights.
Lots of places to mount accessories.
Cons:
Plastic CO2 screw tab could cause problems down the road?
Only shoots BB's - why not make a pellet version with a rifled barrel?
Actually shoots 6 rounds not 8 like the real version of this revolver.
Comments:
What's not to like about this Umarex Smith & Wesson Revolver? It's built very well, it most certainly looks good, it has the best tested accuracy I have seen so far from a BB gun, it shot even higher velocities than claimed, it gets tons of shots from a single CO2, and it loads up just like a real steel revolver but at a fraction of the cost to shoot! If you want to customize yours you have plenty of options with two weaver mounts top and bottom and it comes in at a very reasonable price tag!
