Well ANT (Advanced Novelty Tech) made an update model that supports a bunch more guns, that's a good thing of course. This new model is called the "FIRE" and it supports the following guns. I did find however that ANT list that the Gletcher NGT and Webley Mark VI Revolvers where supported by the FIRE but my findings indicated the CO2 screw on both these guns had a smaller diameter so they where not compatible. Other than that small discrepancy most of the other guns on their list should work just fine.
What exactly is the ANT Advanced Novelty Tech FIRE CO2 HPA Conversion Kit?
The Advanced Novelty Tech FIRE CO2/HPA Conversion Kit is a remote line adapter for Airsoft, BB, and pellet guns. Compatible with over 60 guns, it is easy to install and converts a compatible gun for use with a Paintball remote line and CO2 or HPA tank. Eliminating the need for disposable CO2 cartridges, while still being interchangeable with disposable CO2 cartridges, it delivers a longer, more powerful, and more consistent shooting experience between refills.
So what is the ANT Advanced Novelty Tech FIRE CO2 HPA Conversion Kit going to do for you?
Eliminate the need for the more expensive disposable 12 gram CO2 cartridges.
Use interchangeably with disposable 12 gram CO2 cartridges.
Use in conjunction with a Paintball remote line with standard quick disconnect fittings and a CO2 or HPA tank. (recommended use up to 1000 psi)
Shoot thousands of rounds before needing to refill your CO2.
Fits compatible Airsoft, BB, and pellet gun CO2 pistols.
Easy drop-in installation.
Overall cost savings.
More consistent FPS especially when shooting fast or in full auto.
Almost a year or so ago I made my Table Top Review Video for both the 6mm Airsoft and 4.5mm Steel BB shooting KWC Mac 11 M11 CO2 Pistols, and no they are not machine pistols since they only shoot in semi auto mode. Well anyway, I finally got around to testing these low cost Mac 11 replicas out shooting them through my Chrony Chronograph to find out their real world fps velocity along with my standard 30 foot back semi rested paper target accuracy test. Both CO2 Replica Pistols performed rather well for me and turned out to be both powerful and accurate.
In terms of power, KWC claims 120 meters per second or 394 feet per second for the 4.5mm Steel BB KWC M11 while the 6mm Airsoft Mac 11 had a claimed fps of 152 mps or 499 fps. During my testing both guns actually shot much faster than claimed with the steel BB M11 shooting 5.1 grain steel 4.5mm BB's at an average of 453 fps. The Airsoft KWC Mac 11 with its lighter .20 gram 6mm plastic Airsoft BB's averaged a very hot 556 fps which is probably going to be too hot for most Airsoft fields but a lot of fun shooting in your back yard!
Both the Steel BB and Plastic Airsoft BB KWC M11's have an internal fixed hop-up system which did seem to help out a lot with accuracy. From my semi rested shooting position with paper targets setup 30 feet away, I was able to get well centered 1-5 to 2 inch groupings from both versions of the KWC Mac 11 CO2 Pistols.The Airsoft KWC M11 did shoot a little high and to the right but not a lot while the Steel BB M11 was centered well left to right but again just a little high.
Both KWC Mac 11 M11 CO2 Pistols shoot in double action and have what I would consider to be about medium pull triggers since there are not a lot of moving parts or any type of blowback operation. This means they will be more CO2 efficient and likely to have very few problems since they are very simple in design. If you want a great performing low cost and simple in design Mac 11 Replica then take your pick, 4.5mm Steel BB KWC M11 or 6mm Plastic Airsoft KWC M11!
I have already made a Table Top Video Review for the Gletcher NGT Silver CO2 BB Revolver which for the most part is the same gun but in a 4.5mm Steel BB non rifled barrel version and as the title indicates with a different finish being the silver version. Other than finish and ammunition being used, both guns are virtually the same.
I always like getting outside and shooting the airguns I review even on these fall overcast days, at least the temperature was not too cold, right around 14 °C or 57.2 °F so decent for my testing purposes. The Gletcher NGT R like the BB shooting NGT is a fairly small air revolver and so pretty much anyone should be able to shoot this air revolver even if you have smaller hands, I did find that pre-cocking the hammer for single action shooting was a bit of a stretch when reaching over with the thumb, but you can just as easily shoot in double action, both trigger pulls are nice and light with the double action being a bit longer and heavier.
Loading the 7 round cylinder will take longer than your standard stick magazine BB pistol since you first need to pop some .177 caliber pellets into each shell, if you want to speed up the process you don't have to eject the shells to load them, you can simply index the cylinder and pop a pellet into each shell while still inside the cylinder.
In terms of fps performance, the Gletcher NGT R CO2 Pellet Revolver shot a little higher than expected getting a 4 shot average of 376 fps using 7 grain RWS Lead pellets, so around 50 fps higher than the claimed 328 fps on the box and even a bit higher than the steel BB version I tested earlier. This is really good considering the short barrel and fact that a revolver can leak a little CO2 between the cylinder and the barrel and even the cylinder and the CO2 valve.
I really felt comfortable using the rather old school fixed open post and notch sights, the grey/black finish on the Gletcher NGT R may be a bit hard to see on darker targets but shooting on my white target was no problem. My 7 shot grouping from 30 feet back using a semi rested shooting stance produced about a 1 inch grouping well centred vertically just a hair to the left so all in all the Gletcher NGT R CO2 Pellet Revolver has the power and accuracy I was hoping for even in such a small package.
It has been a while since I picked out some of my favorite guns, after all my favorite gun picks change on a daily basis since there are so many awesome guns out there to pick from.
This Vimeo video is a little different since I pick out my favorites from a bunch of mostly replica gun categories including Steel BB, Pellet, Airsoft, Revolvers and Blank Pistols.
You may notice most of my picks happen to be blowback guns but to me airguns are all about being as realistic as possible and having blowback operation to me help to simulate the realism that much more. The exception in this video is in the pellet gun category since I decided on a pellet gun that was more about function and purpose over being any type of real replica.
Hopefully you take the time to watch my entire Vimeo video since I also bring out some close runner ups but here is a list of my top picks on this day, tomorrow it could be a completely different list of guns ;)
In this Field Test Shooting video I test out both the Daisy Powerline 5501 and Daisy Powerline 5502 CO2 Blowback BB pistols to determine what the real work velocity is and also how well they performs in terms of accuracy. To test velocities for both Airguns I use a my Chrony Chronograph and do my best to get 5 good readings which I then average out. I always use a brand new 12 gram CO2 cartridge and generally use 5.1 grain Zink Coated Steel BB's for my entire Field Testing. For my accuracy test, I set myself up 30 feet back using a semi rested position, to do this I place a sand bag up front to rest my hands and gun on and then stand securely in the back while I place 10 rounds on a paper target. There will obviously be some humane factor involved since I am not perfect but I can usually get a good idea on how accurate a given gun is using this method.
During my Velocity or FPS Chronograph testing, I managed to get 4 good readings out of 15 shots with the Daisy Powerline 5501 scoring an average of 367fps. Amazingly my first 5 shots with the Daisy Powerline 5502 all ready perfectly on my Chronograph even though they where moving a good 50fps faster, go figure? My average velocity for this 5 shot sting of shots was 417fps.
For my accuracy testing I was expecting both guns to perform about the same since mechanically they arevirtually the same other than a longer barrel on the 5502. The Daisy Powerline 5501 however seemed to struggle with consistency, it did group well left to right and up and down on the target but the spread was about 5 inches and it should of gotten closer to 2-3 inches in my books for a blowback pistol like this. The Daisy Powerline 5502 did perform better in terms of accuracy getting closer to a 2-3 inch grouping so overall I have to give the Powerline 5502 the advantage in both velocity and accuracy.
Another noteworthy point to mention is how much quieter the Daisy Powerline 5502 is in person! I am assuming the longer barrel along with the compensator perhaps muffling the sound a bit plays a roll in this. Both Daisy Powerline CO2 Blowback BB Pistols have a nice solid blowback action simulating some recoil and the triggers on both are fairly decent being that they simulate more of a double action feel with their long medium weight pull.
I do like the look of the more simplified Daisy Powerline 5501 with it's chrome frame but the performance and accessory option of the Powerline 5502 are a definite benefit for this model.
This comparison Review Video serves a few purposes, first to compare the ASG Dan Wesson 715 Revolver 4.5mm steel BB version to the 6mm plastic Airsoft version in both velocity and accuracy. Secondly to give my new Chrony Chronograph with lighting kit a test to see if I can get more reliable readings in lower light and thirdly to try and redeem the Steel BB version of the Dan Wesson 715 as last time I tested it, it did not get all that high of fps readings, well below the claimed 430 on the box.
In this review video I test both Dan Wesson 715 Revolvers out, first with my Chrony Chronograph and then all in one take I setup and shoot 6 rounds each on separate paper targets from 30 feet back to see how accurate the smaller heavier Steel BB rounds are compared to the larger lighter Plastic BB's. I used 5.1 grain RWS 4.5mm Steel BB's and .20 gram 6mm plastic BB's and installed brand new 12 gram CO2 cartridges in both guns.
In terms of my Chrony consistency, the smaller steel BB's still struggled to get consistent readings with only 2 out of 6 shots while the larger Airsoft BB's managed to get a good reading 4 out of 6 shots. Steel BB velocity was right around 350 fps while the Airsoft BB's where travelling much faster at closer to 450 fps.
Both the Steel BB and Airsoft CO2 Dan Wesson 715 Revolvers shot 6 round grouping of about 2 inches with 4 out of the 6 shots making a much tighter 1 inch group again with both ammo types. The Airsoft Dan Wesson 715 seemed to be centered on target well while the Steel BB Dan Wesson 715 shot a bit low.
Recently I picked up my new Chrony Beta Shooting Chronograph to replace my F-1 that has not been working so well for me in past videos... I wanted to get outside and give it a try shooting a few of the airguns that I was not able to test out properly. Now I know that under my patio deck, the lighting is not optimal even on sunny days and because of this I have never expected to get perfectly consistent fps recording but as many of you know, my old Chrony F-1 was pretty much not working at all near the end there.
I have ordered a light kit which will help out a lot especially when summer is over and the sky becomes more overcast. But for now I decided to test my Chrony Beta Chronograph under my deck roof as I have been testing all along and see if I can get better results with this newer Beta version.
So makes sure to watch my Vimeo video testing of my Chrony Beta Shooting Chronograph shooting a selection of airguns.
Here is my second instalment for this summers Full Auto Fun Videos. in this Full Auto Fun Video I shoot my KWC M712 Broomhandle CO2 BB Pistol at some more water filled Pop Cans and Clay Pigeons in Full Auto mode of course :)
Last summer I made some "Full Auto Fun" videos and well... I had a lot of fun making them and of course shooting the full auto airguns. So I got to thinking I should make some more Full Auto Fun videos again this summer, at least for some of the new Full Auto guns I have not made these videos for yet.
So to kick it off, I brought out my Umarex Beretta Mod. 92 A1 CO2 BB Pistol and shot up some clay pigeons and water filled cans in Full Auto Mode of course :)
Make sure to watch my Vimeo video for this Comparison Review as I go into a lot of detail about the similarities and difference with each of these CO2 Blowback Pellet Guns.
All of these CO2 blowback pellet guns are made for each company in Japan (I am assuming from the same factory?)
All of the listed Pellet Airguns shoot .177 caliber pellets (Can be Alloy or Lead)
They all have double sided rotary stick magazines that hold 8 rounds on each end for a total of 16 shots per magazine.
All of the Airguns use 12 gram CO2.
All compared pellet guns have Blowback operation.
All of these pellet pistols have single and double action triggers except for the Gamo MP9 which is single action only and needs to be charged on the first shot.
They all have rifled barrels.
Here is where we find some key differences between these CO2 Blowback Pellet Pistols:
Trigger Pull: The trigger pull on the Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol is a lot better than I thought it was going to be. The blowback operation does place the hammer in the cocked position for single action type shooting but the the trigger is still required to index or advance the next pellet to line up with the barrel. Because of this, trigger pull is full length even in single action mode but you can barely feel any added friction from the indexing of the rotary magazine. All of this makes for a slightly longer trigger pull but one that is light weight with a fairly nice and easy release. For some reason the Sig Sauer P226 trigger does feel a little smoother with a slightly easier release.
Accuracy: I have not done my official Field Test Shooting Video with the Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol and I am not sure when I am going to get the chance to do so since I am waiting on a replacement Chronograph for my velocity portion of my testing. That said I can say that Sig has already done some of the work for me and conducted their own "real world" velocity testing for their ASP line of CO2 Pellet Guns. Sig tested both a standard 8.18 grain lead pellet and a high velocity 5.25 grain alloy pellet shooting an 8 shot string with each to find out average fps performance for both pellet types. The 8.18 grain lead pellet average 353 fps while the 5.25 grain alloy pellet average 399 fps. In terms of accuracy, I was able to get just under a 2 inch 16 shot well centered grouping on two separate 30 foot back tests which is pretty decent. I did notice that when shooting a 16 shot string, the first and last shot velocity will vary a fair amount as the CO2 cools the gun and lowers the fps. I would recommend taking your time in-between reloads to let the Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol warm back up.
Build Quality: The Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol is a bit on the lighter side coming in around 1.5 pounds since it does incorporate both metal and plastic construction. You will find the Sig Sauer P250 has a metal slide and plastic frames similar to the real steel version. Weighing it at 1.45 pounds, the P250 is lighter then a standard Sig Sauer P250. Sig claims that their entire APS line of pellet guns is life tested for 15,000 shots so you know this gun is going to last and provide years of shooting fun. The fit and finish seem really good, so far no real paint or finish problems and all mechanically everything is operating as it should.
Realism: The Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol is a very close replica of the real steel Sig Sauer P250. I really like the fact that the safety also works as a working decoker just as it would on the real Sig P250. Other similar working parts are the magazine release and the hammer that stays back for true single action shooting. The slide catch release and take down leaver are purely for show but they are not moulded in parts so they look good and realistic. One slight disappointment for me is when a gun does not have a cut out ejection port, that is the case with both the Sig Sauer ASP P226 and P250 but it does not take away from the shooting fun in any way.
Good overall replica of the real steel Sig Sauer P250.
Designed by Sig and made in Japan, fully Sig Sauer licensed.
Nice heavy blowback operation.
It might feel a bit light weight at first but out of the two Sig Sauer ASP pellet pistols this one seems to shoot a bit better.
Got respectable accuracy and seemed to shoot pretty hard.
Safety works as the de-cocker same as the real Sig Sauer P250.
White dot sights and accessory rail.
Great feel to the trigger not heavy or sticky in any way.
Cons:
Shots tended to slow down a bit near the end of a 16 shot strong as the gun cooled down.
Sight are non adjustable.
Ejection port is not cut out.
Comments:
What I really like about the Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol is that like all the other APS Airgun from Sig, it is a product that Sig has decided to invest a lot of their time and effort to develop rather then simply grab an existing Airgun product from a manufacturer and slap their license on it. Sigs product ingenuity is what will help to improve the airgun industry overall. Getting back to the Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol, it may feel a bit light weight at first but the heavy blowback will rock you unexpectedly! I found in terms of comparison to the Sig Sauer ASP P226, the P250 was more accurate and well centered on target for me as well. If you're a Sig Sauer P250 owner you are for sure going to want to pick yourself up one of these ASP CO2 Blowback Airgun versions so you can get some extra practice time in for pennies per shot and the ability to shoot in a lot more locations..
My Vimeo Table Top Review of the Sig Sauer ASP P250 CO2 Blowback .177 Caliber Pellet Pistol:
Trigger Pull: The trigger pull on the Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol is a lot better than I thought it was going to be. The blowback operation does place the hammer in the cocked position for single action type shooting but the the trigger is still required to index or advance the next pellet to line up with the barrel. Because of this, trigger pull is full length even in single action mode but you can barely feel any added friction from the indexing of the rotary magazine. All of this makes for a slightly longer trigger pull but one that is light weight with a fairly nice and easy release.
Accuracy: I have not done my official Field Test Shooting Video with the Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol and I am not sure when I am going to get the chance to do so since I am waiting on a replacement Chronograph for my velocity portion of my testing. That said I can say that Sig has already done some of the work for me and conducted their own "real world" velocity testing for their ASP line of CO2 Pellet Guns. Sig tested both a standard 8.18 grain lead pellet and a high velocity 5.25 grain alloy pellet shooting an 8 shot string with each to find out average fps performance for both pellet types. The 8.18 grain lead pellet average 359 fps while the 5.25 grain alloy pellet average 403 fps. In terms of accuracy, I was able to get about a 2 inch 16 shot grouping on two separate 30 foot back tests which is pretty decent. I did notice that when shooting a 16 shot string, the first and last shot velocity will vary a fair amount as the CO2 cools the gun and lowers the fps. I would recommend taking your time in-between reloads to let the Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol warm back up.
Build Quality: The Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol is a very solid feeling pistol with its all metal construction. Weighing it at 2.35 pounds, it is actually a tad bit heavier then the real steel version but not by much. Sig claims that their entire APS line of pellet guns is life tested for 15,000 shots so you know this gun is going to last and provide years of shooting fun. The fit and finish seem really good, so far no real paint or finish problems and all mechanically everything is operating as it should.
Realism: The Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol is a very close replica of the real steel Sig Sauer P226, I would say it most closely takes after the MK-25 Threaded Barrel version. I really like the fact that the safety also works as a working decoker just as it would on the real P226. Other similar working parts are the magazine release and the hammer that stays back for true single action shooting. The slide catch release and take down leaver are purely for show but they are not moulded in parts so they look the part. One slight disappointment for me is when a gun does not have a cut out ejection port, that is the case with both the Sig Sauer ASP P226 and P250 but it does not take away from the shooting fun in any way.
Good overall replica of the real steel Sig Sauer P250.
Really solid feeling gun, has awesome weight to it with it’s all mental construction, pretty close in weight the real steel version.
Designed by Sig and made in Japan, fully Sig Sauer licensed.
Nice heavy blowback operation.
Got respectable accuracy and seemed to shoot pretty hard.
Safety works as the de-cocker same as the real Sig Sauer P226.
White dot sights and accessory rail.
Super easy CO2 loading system, no having to tighten a CO2 tab.
Great feel to the trigger not heavy or sticky in any way.
Cons:
Shots tended to slow down a bit near the end of a 16 shot strong as the gun cooled down.
Sight are non adjustable.
Ejection port is not cut out.
Comments:
What I really like about the Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol is that like all the other APS airguns from Sig, it is a product that Sig has decided to invest a lot of their time and effort to develop rather then simply grab an existing arigun product from a manufacturer and slap their license on it. Sigs product ingenuity is what will help to improve the airgun industry overall. Getting back to the Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol, it's a really solid CO2 Pellet pistol that is a lot of fun to shoot and for Sig Sauer P226 owners, the pellet shooting airgun version offers a super economical and safe way to get some practice in using a product that looks, feels and shoots similarly to their real steel counterpart.
My Vimeo Table Top Review of the Sig Sauer ASP P226 CO2 Blowback .177 Caliber Pellet Pistol:
I have been waiting a long time (since SHOT Show two years ago) to finally get my hands on the Sig Sauer ASP CO2 Blowback Pellet Pistols and they finally arrived at my US Post Office Box. A big thanks to Sig for sending them to me! So today I made the dreaded trip across the boarder to pick them up and then deal with the Border Custom Agents which much of the time have no idea what they are doing when it comes to Airgun Importation laws. It's not like it's their job or anything??? Today was no exception and I spent several hours waiting as my Customs Agent disappeared behind closed doors to do his research on Airgun Importation. That's another story completely that at this time I don't want to get into, perhaps I will make a video about this another time? The good news is I prevailed and was able to bring both of my new Sig Sauer Air Pistols home with me.
This video is a bit like an unboxing and preview video combined, I don't go into a lot of detail or talk specifications much but I do show you around both the Sig Sauer ASP P226 and Sig Sauer ASP P250 nice and close and in detail. I will be making a future Table Top and Shooting Video for these fine Sig Air Pistols which are both CO2 operated, have blowback operation, shoot in both single and double action, shoot lead or alloy pellets using a 16 round double sided rotary stick styled magazine, shoot around 400 fps and feature Sig Sauer licensing all around.
First off, this will be the last video where I try and use my Chrony Chronograph to determine the fps velocity for one of my airguns. It's time has come and I am officially retiring my Chrony or should I say setting aside for later destruction by means of many rounds of airgun ammo fired at it... I just need to locate and order a replacement solution, perhaps I will reach out to Chrony and see if they can help me out since they should really look into restoring my faith and many of my viewers faith in this product ;) If the airgun I am testing has blowback operation then I generally also record some slow motion video and place it in the end of the video while I am talking it out.
Moving on with my Field Test for the Air Venturi ISSC M22 CO2 Blowback BB Pistol. If you have not already checkout my Table Top Review for it then make sure to do so for some close up video and the main features and benefits.
As per normal my Field Test Shooting video is composed of a Chronograph test which in this case resulted in pretty much no data other than one recorded shot which may or may not even be accurate? I also step back 30 feet and shoot 10 rounds on a paper target with my Air Venturi ISSC M22 CO2 Blowback BB Pisto to figure out how close of a grouping I can get for the sake of accuracy purposes. I do us a somewhat rested shooting position which allows me to in most cases get pretty decent results with less human factor involved.
In terms of FPS for the Air Venturi ISSC M22 CO2 Blowback BB Pisto, all we can really go on are the claimed fps specifications which are 400, I would say based on how quickly rounds get to the target and how hard they hit that 400 fps is about right, perhaps even a little more? Maybe once I get my new Chronograph I will have to revisit this gun and see what it can do.
Accuracy wise I was able to fire 10 rounds within a nice 2 inch grouping, they did shoot a bit left for me but the good news is that the Air Venturi ISSC M22 CO2 Blowback BB Pisto has an adjustable rear sight for windage so this can be corrected for each user. The blowback Action is pretty hard on this gun, very quick and snappy, it is also fairly loud when using a new CO2. There is a fair bit of trigger take-up since the first stage of the trigger pull also chambers a round into the barrel form the full size drop out magazine. Once you get to the break point of the trigger there is a bit of extra tension followed by a distinct release. It may not be the smoothest trigger I have used but it does work just fine.
Overall the Air Venturi ISSC M22 CO2 Blowback BB Pisto has a lot going for it, good looks, blowback operation with a full size drop out magazine, an adjustable rear sight, decent power and accuracy and it is an excellent replica for the real steel ISSC M22.
In this Review Video I focus on the shooting performance of the Sig Sauer MPX ASP .177 Caliber Pellet Rifle to find out what kind of FPS we can get out of it and exactly how accurate the MPX is from 30 feet back using a fairly stable semi rested shooting position. I'll tell you right away my Chrony Chronograph has officially called it quits and I will be looking at replacing it for future Field Test Shooting videos. Lucky for us Sig sent me their real world inhouse testing using both 5.25 grain high velocity pellets and standard 8.18 grain lead pellets.
Here are the average results Sig achieved from each pellet type shooting an 8 shot string.
5.25 Grain Alloy High Velocity Pellets:
FPS - 506
Energy in Foot pounds - 2.98
Energy in Joules - .1257
Temperature at time of testing - 71 Degrees Fahrenheit
8.18 Grain Standard Lead Lead Pellets:
FPS - 447
Energy in Foot pounds - 3.63
Energy in Joules - .153
Temperature at time of testing - 71.5 Degrees Fahrenheit
In terms of accuracy, this rifle is made to shoot at much further out ranges than 30 feet but I was still able to get on what kind of a grouping is possible with the Sig Sauer MPX ASP .177 Caliber Pellet Rifle. I first shot 10 rounds at my paper target and then had a quick look. I was able to get a nice 1 inch grouping which I am sure I could improve upon with some more shooting time with the rifle. I was also not using a magnified scope, just a standard red dot. I then shot the remaining 20 rounds to finish off the 30 round belt fed magazine and for the most part the majority of the pellets all fell within the first 10 shot grouping and I did rip these shots off pretty quickly, about as fast as I could pull the trigger that is.
All in all the Sig Sauer MPX ASP .177 Caliber Pellet Rifle is a good performer, I am very happy with FPS form an 8 grain pellet consistently hitting 450 FPS, that's plenty fast enough to shoot all kinds of targets even out at further ranges. Accuracy was also consistent even under rushed shooting so I can imagine the Sig Sauer MPX ASP .177 Caliber Pellet Rifle would make a great trainer for tactical shooting situations. I thing Sig has a real winner here, great looks, excellent quality and good performance all at a reasonable cost. I just hope we get them here in Canada soon...
I wanted to make a quick update video to let everyone know what I will be up to over the next few weeks since it will effect my video production just a little bit, that said I will do my best to keep the videos coming...
If you remember last year around August, I entered a Fitness contest where I competed in Men's Physique. Well I did fairly well and placed 1st in two divisions, Masters and Open. What this means is I am now qualified to compete in my local Provincial Finals this year which is coming up in less than two weeks. The event is called the Vancouver Pro Am and it will be held in Vancouver BC Canada.
To get to the point, my contest prep especially the last couple of week is fairly taxing on me physically and mentally, it also takes up some of my time. So my videos may not be as regular and they may not be as put together since my mind is not working 100% right now due to the lack of food and carbs I am not eating ;) Anyway I will do my best! You can follow my Fitness journey over at www.GetFitOver40.com.
I also talk about two new Sig products I will be picking up next week to review, the Sig Sauer P250 and Sig Sauer P226 CO2 Blowback Pellet Pistols. I hope to at least have a preview video for you later on next week.
Materials: Plastic main body with some metal parts.
Weight: 1.6 pounds (708 grams).
Barrel: 5.5 inches - Metal none rifled.
Propulsion: 12 gram CO2.
Action: Blowback single action only.
Ammunition Type: 4.5mm Steel BB's.
Ammunition Capacity: 20 round top loading stick magazine.
FPS: 350+.
Trigger Pull: The trigger pull on the Daisy Powerline Model 400 CO2 Blowback BB Pistol is single action only and has about a medium pull to it, not the lightest single action trigger I have shot by far but not too heavy by any means. There is some initial take-up with a noticeable release point.
Accuracy: Make sure to watch my full Field Test Shooting video for th PHOTO4 Daisy Powerline Model 400 CO2 Blowback BB Pistol. When performing my usual 30 foot out paper target shooting performance test I was able to get about a 2 inch 10 shot grouping using a semi rested stance. This pistol did shoot rather on the high side so you will have to aim low as the sights are non-adjustable. In terms of velocity I was able to get fairly consistent 350fps performance using a brand new CO2, this is pretty good considering this is a 20 year old pistol and may have been one of the first blowback airguns to hit the market. The Daisy Powerline Model 400 CO2 Blowback BB Pistol was a bit of a CO2 hog only getting around 50 shots out of one 12 gram CO2.
Build Quality: The Daisy Powerline Model 400 CO2 Blowback BB Pistol is a mainly all metal airgun but it is solid and well built, The plastics used long ago in my opinion are superior in terms of longevity to today plastics. Being a Japan built gun is also a plus and you will find metal parts where they need to be as in the hammer, trigger, barrel, safety and many other internal parts. Keep my used pistol is over 20 years old and still looks and works like new.
Realism: The Daisy Powerline Model 400 CO2 Blowback BB Pistol is an obvious replica of a Desert Eagle Semi Auto Pistol, there are no licensed markings but there is no doubt what this gun is intended to look like. In terms of size and overall appearance it is a good copy of a real steel Desert Eagle but it does weigh in a lot lighter being made mostly from plastics. Some mechanical parts are moulded into the gun like the safety and slide catch but the blowback operation helps add back to the realism. Of course the top loading 20 round BB magazine is not at all what you would expect to find on the real Desert Eagle, that said it is practical for loading a BB gun.
Trigger Pull: The single action only trigger pull on the Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol is very nice, there is some take up required be for the release but the release or break point is very smooth, perhaps a little too smooth since there is no real noticeable resistance so you will have to get use to the range in the trigger pull in which the release takes place. Since there is no external hammer you will need to draw the slide back in order to cock the internal striker.
Accuracy: Make sure to checkout my full Field Test Shooting Video for the Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol where I test out this fun S&W M&P40 BB shooting replica by shooting some BB's through my chronograph and also at a paper target to find out how it performs. In summary I was able to get an average of around 300 fps and accuracy in the 2 inch size groupings from 30 feet away. Not bad for a full blowback short barrel CO2 BB pistol. It did shoot a little low so some manual target sighting adjustments may be required.
Build Quality: Very good, with metal and plastic construction where you would find it on the real steel S&W M&P40. I am fairly certain the the Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol is made by KWC which has produce some other nice quality examples of other full blowback replica BB and Airsoft pistols. As with most KWC powder coated airguns, you will get some wear in the high spots of the finish over time but this is true even with real steel blued guns.
Realism: This is by far the best example of a 4.5mm BB shooting Smith & Wesson M&P out there, I have had several real steel M&P40 owners comment on how accurate this BB copy really is including how the barrel drops from its locked position and angles down and up during blowback operation. You even get interchangeable grip backstraps to accommodate different sized hands. And of course all the mechanical parts function as you would expect them to including being able to fully field strip the Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol.
Most accurate looking steel BB shooting replica of the S&W M&P40 to date.
Good weight and feel to it.
Metal and plastic parts where you would find them on the real steel version.
Realistic working safety and working slide catch and release.
Full size dropout metal magazine that holds BB's and CO2.
Can be field stripped like original Smith & Wesson M&P40.
Fully Smith & Wesson licensed via Umarex.
Rail for add on accessories.
White dot sight with adjustable front sight for windage.
Comes with three sizes of interchangeable grip backstraps.
Cons:
FPS may be low for some people that like the more powerful CO2 pistols.
Shoots a bit low out of the box.
Ugly white warning instruction on the slide.
Comments:
Many of us have been waiting for a blowback Smith & Wesson M&P and now we have one. Thanks to Umarex, we also get it in a fully licensed version to make it even more realistic! Everything about the Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol is so very accurate to the real steel version other than of course the fact that it shoots 4.5mm Steel BB's using CO2 but isn't that why we are interested in it in the first place? If you are a Real Steel S&W M&P owner than you are going to have to get yourself one of these as a low cost and easily accessible training alternative. A great choice fro anyone else looking for an ultra realistic 4.5mm CO2 blowback pistol what ever your purpose is.
My Vimeo Videos for the Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol:
In this Field Test Shooting video I take out my Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol and put five shots through my Chronograph to see what the real word velocity performance will be, I also test the accuracy of the Smith & Wesson M&P40 by placing ten shots down range at a paper target setup 30 feet back using a semi rested shooting position(Pistol rested on a sandbag while standing in the back). I also include some slow motion video of the Umarex Smith & Wesson M&P40 CO2 Pistol blowback action close up for you to see how it cycles.
For my Feet Per Second portion testing I inserted a brand new CO2 cartridge along with 5.1 grain RWS nickel coated 4.5mm Steel BB's. The temperature outside was 15 degrees Celsius (59 Fahrenheit), so not overly warm or cold, On a warmer day I would expect a little higher fps for sure. Umarex claims a velocity of 310 fps from this pistol, As my Chronograph was misbehaving a little I was only able to get a three shot to record but was able to get a fairly realistic average of 299 which was pretty close to the claimed fps for the Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol.
Moving on to the Target Accuracy portion of my Field Test, all 10 shots landed within a 2 inch grouping, not bad for a full blowback BB pistol. I did notice the shots where a little low so some sight placement adjustments would be required depending on your shooting range since the sights on the Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol are non-adjustable for elevation, they are however adjustable for windage using the front sight to make adjustments. The blowback action is nice and heavy and the single action only trigger release is fairly light and kind of sneaks up on you a bit til you get used to it. You should be able to get around 4 magazines out of the Umarex Smith & Wesson M&P40 CO2 Blowback BB Pistol as long as you take some time in-between loading up your magazines to let both the magazine and gun warm up a bit from the cold CO2.
I have been waiting a while for this version of the Full Blowback Smith & Wesson M&P40 CO2 BB Pistol, and I am happy to say I am not disappointed in the least, it's a really great replica from Umarex and a must have BB pistol in my books!
