Type: BB air pistol.

Manufacturer: ASG.

Model:ASG Steyr M9-A1 Non-Blowback.

Materials: Mostly polymer construction.

Weight: 1.31 pounds.

Barrel: Metal non-rifled.

Propulsion: CO2 x 1.

Action: Semi auto non-blowback, double action only.

Ammunition Type: 4.5mm BB's.

Ammunition Capacity: 19 round magazine.

FPS: 410-450.

Trigger Pull: The trigger pull weight on the ASG Steyr M9-A1 is pretty typical of a double action trigger, in about the middle of the spectrum. The action of the real Steyr M9-A1 is also DOA (double action only) as it uses a hammerless stiker-fired trigger setup.

Accuracy: I shot the ASG Steyr M9-A1 air pistol at a target from 20 feet away in a free standing position, and it performed respectfully, getting about a 2.5 inch grouping fairly close to the center of the target - just high and to the left. The rear sight is non-adjustable so if you find you shoot a bit off with this airgun then you will need to adjust your aim-point slightly. My Chrony testing with an eight shot averaged result was a very consistent 425 fps - right where the claimed manufacturer fps said it would be for this air pistol!

Build Quality: ASG has not let me down so far with their guns and the ASG Steyr M9-A1 is no exception, it may not be the most complex or have a bunch of metal parts, but it does get the job done and with a lot of style. The plastic/polymer parts look well made and the airgun has good overall weight for being mostly plastic. Fit and finish is also very good.

Realism: The ASG Steyr M9-A1 BB shooter is a really close replica to the ractual 9mm ASG Steyr M9-A1 semi auto 9mm pistol, the only real giveaway is the safety, a "real looking" one is molded into the frame, but the actual usable safety (just below it) borrows from some other gun technologies and is a bit of a give away. Other than that the ASG Steyr M9-A1 with its Steyr licensing and trademarks looks pretty much bang on to the original pistol.

Purchased From: The Replica Airguns Store.

Pros:

• Excellent shot FPS consistency.
• Good power.
• Good CO2 efficiency - 7 magazines - 133 shots.
• Excellent quality control. Very well made, fit and finish is excellent.
• Metal dropout magazine.
• Accessory rail for lasers and tactical lights.
• Believable Steyr M9A1 Replica.
• Really usable sights - Fiber optic in the back and white dot in the front!
• Gun ergonomics are very nice - very modern looking gun.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Trigger pull is a bit heavy and I found it may have effected my accuracy a bit.
• Mostly Polymer gun.
• Could have been a bit more accurate for me.

Comments:

The ASG Steyr M9-A1 air gun is really made to be a BB shooter and so it does it really well by getting consistently high fps and lots of shots per CO2, the fact that ASG was able to make it look so much like the real ASG Steyr M9-A1 is an added bonus and even better is that this gun will not break the bank. Sure, it's nice to have blowback, a full sized drop out magazine and lots of metal parts but then the extra price tag that goes along with the extras adds up and can make an airgun unobtainable for some. So if your looking for an affordable really nice looking BB plinker you're going to get lots of good shots out of, the ASG Steyr M9-A1 may be just right for you!

My YouTube Video Review for this quality Airgun:

Buy the Steyr M9-A1 in Canada — Buy the Steyr M9-A1 in the US

Type: BB air pistol.
Manufacturer: ASG.
Model:  ASG STI Duty One 1911 Blowback.
Materials: Metal slide and polymer frame.
Weight: 1.8 pounds.
Barrel: Metal non-rifled.
Propulsion: CO2 x 1.
Action: Semi auto blowback, single action.
Ammunition Type: 4.5mm BB's.
Ammunition Capacity: 20 round magazine.
FPS: 383.
Trigger Pull: The trigger pull on the ASG STI Duty One 1911 is nice and light due to its true blowback operation that cocks the hammer back with each shot taken. The pull is rather long but nothing really happens till you get right to the end and then there is just a slight bit of pressure and a quick release.
Accuracy: I shot the STI Duty One 1911 air gun at a target from 20 feet away in a free standing position, and it performed well getting a 1.5 to 2 inch grouping right in the center of the target. The rear sight is adjustable for windage which is always nice to have just in case you are shooting a bit to the left or right. For me there was no need to adjust the sights. My Chrony testing with an eight shot averaged result was 373 fps - very decent for a blowback pistol!
Build Quality: ASG did an awesome job designing and making the STI Duty One 1911 Blowback BB gun, they didn't really compromise on anything other than the polymer frame! With that said all that important parts like the Slide, Slide Catch, Safety, Mag Release, Hammer, Barrel and Magazine are all metal. The fit and finish as with all the ASG air guns is excellent!
Realism: The ASG STI Duty One 1911 Blowback is a really close replica to the real steel STI 1911, the only real giveaway is the trigger design, as a true 1911 trigger is not your typical lever type. Even with the different type of trigger the STI Duty One is a very good replica complete with all the STI licensing and trademarks.
Purchased From: The Replica Airguns Store.

Pros:

• Realistic true blowback action.
• Adjustable rear sight for windage.
• True single action blowback gun.
• Excellent quality control. Very well made, fit and finish is excellent
• Good power, accuracy, and CO2 efficiency for a blowback gun.
• Metal dropout magazine.
• Good STI Replica.
• Extremely enjoyable gun to shoot!

Cons:

• Trigger is not true to the real 1911 style.
• Has a polymere frame, not metal.
• I found the CO2 kind of hard to get out.

Comments:
I am quickly realizing that ASG is a company that makes not only some really nice air pistols, but also ones with excellent quality control and design. The STI Duty One 1911 Blowback CO2 BB gun is no exception to this and I found it a blast to shoot because it felt great in the hand, shot hard and on target, performed flawlessly and I was able to get a lot of shots from a CO2 even with the blowback and high fps for a blowback shooter. If you're a 1911 fan or you simply like full size guns that mean business, then take a look at the ASG STI Duty One 1911 Blowback CO2 BB pistol. If I had to pick one BB shooter to take out for a day of plinking, this would probably be the one!

My YouTube Video Review for this quality Airgun:

Buy this gun in Canada   -   Buy this gun in the US

Along with my Steyr M9-A1 that arrived today, I also received my ASG STI Duty One 1911 Blowback BB Pistol. I have to say every single ASG product that I have received to date has just really been a high quality product with absolutely excellent quality control. And my STI 1911 Duty One is no exception.

The ASG STI 1911 is not entirely metal but it does have good weight and it does have metal where you want like in the slide, barrel, trigger, hammer, magazine, magazine release button, safety and slide catch. The frame is however polymer.

It was nice to see an adjustable rear sight for windage and like a true 1911 the ASG STI 1911Duty One is single action only so you will need to cock the hammer or rack the slide to get it going. I'm really looking forward to shooting this gun tomorrow so look forward to that YouTube video review coming up very shortly, maybe even by tomorrow night I'll have it up?

Buy this gun in Canada   -   Buy this gun in the US

Everyone has been asking for a true Colt 1911 A1 styled blowback Air gun with a true Colt 1911 trigger system. Well I guess the folks over at Cybergun where listening because they just released their Tanfoglio Witness 1911 A1 Blowback CO2 BB Pistol and it looks awesome!

We are expecting them in stock in just over a weeks time so make sure to get your order in now at our introductory pricing.

Here are some specifications to keep you going until we get them in stock and I get the chance to review this fine 1911 A1 Colt replica.

• 4.5mm BB
• CO2 powered
• 18 round full size drop out magazine
• 320 fps
• 2 pounds
• 8.6 inches long
• Blowback
• Full metal

Buy this gun in Canada   -   Buy this gun in the US

I already have a customized full auto Drozd Blackbird who can pass up another Dorzd when the price is right! I will be making a double Drozd video down the road :)

My new Classic Drozd came with the Full Auto mod chip, the JimC hand made barrel, a 68ci Nitro Duck 4500 PSI carbon fiber tank and bulk air hose.

I also got the Red Dot scope with my new purchase but used one of my rial risers that fit perfectly giving my new Drozd an AR look to it.

Buy Drozd Guns in Canada

Buy BB Guns in the US

Type: Pellet air pistol.

Manufacturer:Umarex.

Model:Walther CP88 Blued/Matte Black.

Materials: Mostly metal construction.

Weight: 2.25 pounds.

Barrel: 3.75 inches, metal rifled.

Propulsion: CO2 x 1.

Action: Semi auto, single and double action.

Ammunition Type: .177 caliber pellets.

Ammunition Capacity: 8 rotary magazine.

FPS: 393.

Trigger Pull: The trigger pull on the Umarex Walther CP88 is extremely nice in both single and double action mode with the single action having the lightest pull making it really easy to shoot on target with accuracy.

Accuracy: I shot this air gun at a target from 20 feet away in a free standing position, and it performed very well getting about a two inch grouping close to the center of the target and staying in the two inch sweet spot even with 3 magazines or 24 rounds shot, I shot just a little bit high and to the right. The good news is the sights can be adjusted for windage if you are shooting a tad bit to the left or right. My Chrony testing with an eight shot averaged result was 360 fps using 6.9 grain RWS pellets.

Build Quality: This is an almost all metal air gun with great fit and finish and a nice dense 2.25 pound weight to it. It's made in Germany, so you know it's made right? The only plastic parts to speak of are the grips which are a hard matte black plastic which matches the rest of the airgun nicely. All the mechanical parts operation are as smooth as butter.

Realism: The Umarex Walther CP88 is a licensed replica of the real Walther P88 semi auto pistol. It looks very close to the real steel with the exception of the break in the slide where the rotary magazine is accessible and the extra "C" in the name.

Purchased From: The Replica Airguns Store.

Pros:

• Almost all metal construction - good weight and very solid feeling gun - 2.25 pounds!

• German made!

• Comes in a nice hard-shell case.

• Very nice looking gun with in the Matte black - Blued finish.

• Adjustable rear sight for windage.

• Double and Single Action trigger, very smooth and light.

• Ambidextrous safety just like the real steel.

• Very good accuracy, decent FPS for a pellet shooing pistol and good usage of CO2 (12 magazines).

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• More expensive then many entry level guns but much higher quality.

• The sights are a bit hard to see when shooting on certain darker backgrounds.

• Engraving on the right side of the gun is a bit loud on the black color.

Comments:

I have to say I pretty much like everything about this airgun; Its size, its looks, it's German build and quality and the way it shoots. The Umarex Walther CP88 air pistol is one of those airguns I think everyone should save up for just to have the pleasure to own and shoot. It may not have blowback or a full size drop out magazine like some of the other newer styled flashier air pistols but I can tell you it is a real joy to shoot. When you hold it in your hand and point it at the target, all you can think about is how much fun you are having with this fine air gun.

My Vimeo Video Review for this quality German made Airgun:

Buy this gun in Canada

Buy this gun in the US

This is the last airgun addition for today! I just added a new pellet pistol that is a bit hard to get here in North America! The entire Anics line is not too common. I'm happy to let everyone know we mow have the Anics Skif A-3000 28 shot CO2 pellet pistol available for purchase in our Replica Airguns Store.

More info on the Anics Skif A-3000

The Anics Skif A-3000 CO2 pellet pistol is styled after the Walther P22 semi auto pistol. The Skif A-3000 uses a very unique removable belt-fed magazine that hold 28 rounds of .177 caliber pellets and shoots up to 400 fps. The Skif A-3000 has a polymer frame and working metal slide that is not blowback but does move and stay in the locked back position. The Anics Skif A-3000 also has an adjustable rear sight for windage and elevation.

• .177 caliber pellet
• CO2 powered
• 28 rounds
• 400 fps
• 1.6 pounds
• 7.3 inches
• Rifled Barrel
• Double and single action
• Moving slide
• Weaver style accessory rail
• Adjustable rear sight

Buy similar guns in Canada   -   Buy similar guns in the US

I've been busy adding products to the Replica Airguns Store over the last few days. The ASG Steyr M9-A1 BB is a really well priced 4.5mm BB pistol in a non-blowback model which is sure to give you a bit higher feet per second, more shots per CO2 and even a bit better accuracy.

Here is some more info:

The ASG Steyr M9-A1 Non-Blowback CO2 4.5mm BB pistol is a faithful copy of the real model Styer mannlicher M9-A1 complete with licensed trade marks and a functional safety pin. You will get over 400fps shots from the 19 round drop out magazine and just like the real steal you can add a laser site or tactical light to the weaver style accessory rail.

• 4.5mm BB
• CO2 powered
• 19 rounds
• 413 fps
• 1.3 pounds
• 7.36 inches
• Non-blowback
• Weaver style accessory rail
• licensed markings

Buy this BB Pistol in Canada   -   Buy similar BB Pistols in the US

It was only just a little while ago when I didn't have any 1911 Replica guns either personally or available over at the Replica Airguns Store! Now I have a nice selection: Umarex Colt Special Combat, Umarex Colt Government 1911 A1, and now my new ASG STI Duty One 1911 Blowback is on its way.

And we also have them available for purchase in our Replica Airguns Store so make sure to check them out!

Some Product info for you:

The STI Duty One 1911 Blowback is a full size replica of the actual STI Duty one 1911 pistol which is a modernized and upgraded version of the original classic Colt 1911. You will find features like; an integrated weaver rail for lasers and tactical lights, high rise beavertail grips, a unique serial number on each air pistol and STI licensed markings.

Another high quality product from ASG!

• 4.5mm BB
• CO2 powered
• 20 rounds
• 383 fps
• 1.8 pounds
• 8.6 inches
• Blowback
• Integrated weaver rail
• licensed markings

Buy this gun in Canada   -   Buy this gun in the US

Type: Pellet air pistol.

Manufacturer: Valtro.

Model:Airgun 92.

Materials: Polymer frame with metal internal parts.

Weight: 1.7 pounds.

Barrel: Metal rifled.

Propulsion: CO2 x 2.

Action: Semi auto, single & Double action.

Ammunition Type: .177 caliber pellets.

Ammunition Capacity: 14 round rotary magazine.

FPS: 394.

Trigger Pull: The trigger pull on the Valtro Airgun 92 has a medium weight in single action mode making it easy to place your shots on target. Double action shooting is also possible but does have a much heavier trigger pull, I found it on the heavy side but still had no problems shooting rapid fire in double action mode.

Accuracy: I shot the Airgun 92 at a target from 20 feet away in a free standing position, and it performed well after I figured the gun out and tried a few pellet variations. In the end I was able to get the Airgun 92 to shoot about a 1.5 to 2 inch grouping just to the left of the center mass on the target. The sights are non-adjustable, but for me there wasn't really a need to adjust them since I was well on target. My Chrony testing with a six shot averaged result was 330 fps.

Build Quality: The Valtro Airgun 92 is another air pistol that utilizes Polymer in many of the parts of the air gun. Valtro did not cheap out and put plastic where it could effect the performance. The barrel, trigger, hammer, CO2 screw tab, Magazine ejector and the majority of the working parts are all metal with the exception of teh external shell being made form polymer plastic, and even then the polymer is nice and thick and meant to last.

Realism: The Valtro Airgun 92 is a close copy of the Beretta 92FS styled semi auto pistol which is one of my favorite old school pistol designs. You will not find any Beretta branding on the Airgun 92 as it is not a licensed replica but from a few feet away it would be hard to tell them apart.

Purchased From: The Replica Airguns Store.

Pros:

• One of the few airguns these days that comes with a hard shell plastic case!
• Quality made in Italy.
• Comes with an extra set of rotary magazines.
• Uses duel CO2s' for more shots and better consistency.
• Single and double action.
• Rifled barrel
• Tactical rail for Lasers and Tac-lights.
• Good usage of metal components where needed.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• The double action trigger is a bit tough but still usable.
• May have more plastic in teh build then some people like.
• Could have just a bit more power but still a great plinker.
• Sights are non-adjustable

Comments:

I definitely recommend the Valtro Airgun 92, especially if you are a Beretta fan! This pellet shooter is a mid-range priced gun that has a lot going for it: Italian built, high capacity pellet magazine, unique CO2 system with never ending shots, double and single action, rifled barrel, hard shell case, and overall great looks and performance. If you're looking for an air pistol with a bit more accuracy over a BB shooter (especially at longer ranges), then take a look at the Valtro Airgun 92 for your next air pistol purchase.

My YouTube Video Review for this quality Airgun:

Buy this gun in Canada

I have been diversifying a bit with some new products for the Web-store, recently adding two diana break barrel rifles and now this Crosman 1077 Multi-pump Pellet Pistol in .177 caliber. My website is dedicated mainly to replicas but there is definitely a crossover into other styles of airguns, I know I appreciate and use them!

Here is the information on the Crosman 1377 Pump Action .177 caliber Pellet Pistol:

The Classic American Pump Pistol. The .177 caliber pneumatic air pistol features a single-action bolt design for easier cocking and loading, a rifled steel barrel for accuracy and an easy-pump forearm for variable pump power.  The Crosman 1377 features fully adjustable rear peep or open sights and a fixed blade front. The variable pump power lets you control the velocity for whatever shooting you are doing!

These units are new condition Refurbished models!

• .177 pellet
• 495 FPS
• Length: 13.63"
• Weight: 2 pounds
• Underlever pump action
• Single shot - Bolt
• Rifled barrel

Crosman 1377 .177 Caliber Pellet Pistol - Refurbished

C$59.00

The Diana 240 Classic is the second of the two Diana Break Barrel Pellet Rifles I just added to the Replica Airguns Store and it is also available in the 495 FPS non-PAL version. 

The Diana 240 Classic Break Barrel Pellet Rifle has a simplistic design, while incorporating top equipment and high precision parts which give this quality air rifle the characteristics of the new Diana product line. The Diana Classic 240 has the new straight classic wooden stock and will give you no end of 495 feet per second shooting fun and leisure-time.

• .177 & .22 caliber @ 495 FPS
• Barrel length: 16.5"
• Weight: 5.8 pounds
• Break barrel spring piston
• Total Length: 41"
• Wood stock

Buy this Air Rifle in Canada   -   Buy Air Rifles in the US

I just added a couple new name brand air rifles from Diana. The first one is the Diana Panther 21 Break Barrel Pellet Rifle in both .177 and .22 caliber versions. Both versions shoot up to 495 fps so they do not require a PAL for purchase.

The Diana Panther 21 Break Barrel Pellet Rifle is a low-cost introduction to the world of Diana air rifles. Diana's successful, youthful lightweight model inspires confidence with its modern design, precision and an extremely attractive price. Combining the power plant of the 240 Classic with the durable black synthetic stock will attract not only just younger shooters.

• .177 & .22 caliber @ 495 FPS
• Barrel length: 16.5"
• Weight: 5.8 pounds
• Break barrel spring piston
• Total Length: 41"
• Synthetic all weather stock

Buy this Air Rifle in Canada   -   Buy Air Rifles in the US

It took a little longer then expected but we finally have out Airgun 92 Shoot2 System CO2 Airguns in stock!

If you didn't already have one on pre-order and want to pick one up then order yours today!

Buy this gun in Canada

Related Posts:

• 1000000 VIDEO VIEW - 1000TH SUBSCRIBER CONTEST - UMAREX SA177 - EKOL TUNA GIVEAWAY

Everyone has been patiently waiting to find out who the winners are of my One Million Video Views and One Thousandth Subscriber Contest are. But before I get to that, I wanted to thank everyone who participated in the contest and not only entered but also told their friends about it.

I also wanted to mention that since March 15 (when the contest was announced), I have received approximately 400,000 more video views and over 600 new subscribers! I am really thankful and happy for all of your support!

Now for the winners... I guess you are going to have to watch my YouTube video to find out who you are...

Here is my YouTube Video for this Contest Giveaway Results!

I did a full review of the ASG CZ 75 P-07 DUTY a while back but I didn't include any actual footage of the CZ 75 shooting. This BB shooter has a nice blowback action so I wanted to show you how this semi auto air pistol cycled in regular speed and then slowed down to 420 frames per second with my Casio high speed camera.

Here is my YouTube video showing the CZ 75 P-07 DUTY in action:

Buy this gun in Canada   -   Buy similar gun in the US

I wanted to go back and do a full Chronograph Chrony test for my Umarex PX4 Storm and I thought I may as well do a live target shooting test while I was at it. I also thought I would try out my under barrel laser sight and see how it worked and what it looked like while filming it shooting in action. The PX4 shot an average of around 340 fps using 6.9 grain RWS pellets.

And lastly, I pulled out my Casio high speed camera and shot the blowback action of the PX4 Storm, first in real time and then also slowed down to 420 frames per second.

Here is my Vimeo video showing my Chronograph and Shooting results for the Umarex PX4 Storm:

Buy this gun in Canada

 Buy this gun in the US

Type: Pellet air pistol.

Manufacturer:Umarex.

Model:Colt Government 1911 A1 Nickel.

Materials: Mostly metal construction.

Weight: 2.5 pounds.

Barrel: 5 inches, metal rifled.

Propulsion: CO2 x 1.

Action: Semi auto, single and double action.

Ammunition Type: .177 caliber pellets.

Ammunition Capacity: 8 rotary magazine.

FPS: 425.

Trigger Pull: The trigger pull on the Umarex Colt Government 1911 A1 is extremely nice in both single and double action mode with the single action having the lightest pull making it a joy to shoot at targets.

Accuracy: I shot this air gun at a target from 20 feet away in a free standing position, and it performed excellent getting just over a one inch grouping close to the center of the target, just a little bit high. The sights can be adjusted for windage if you are shooting a tad bit to the left or right. My Chrony testing with an eight shot averaged result was 383 fps.

Build Quality: This is an almost all metal air gun with great fit and finish and a nice hefty 2.5 pound weight to it. It's made in Germany, what more do I need to say? The only plastic parts to speak of are the grips which almost feel like a mix between rubber and plastic. All the mechanical parts opperation are as smooth as butter.

Realism: The Umarex Colt Government 1911 A1 is a licensed replica of the real Government Colt 1911 A1 45 auto pistol. It looks pretty much bang on with the exception of the slight break in the slide where the rotary magazine is accessible.

Available From: The Replica Airguns Store.

Pros:

• Almost all metal construction - good weight and very solid feeling gun - 2.5 pounds!

• German made.

• Comes in a nice hard-shell case.

• Very nice looking gun with the two-tone Nickel and black finish.

• Adjustable rear sight for windage.

• Double and Single Action, very smooth and light.

• Accurate trigger design and working back-strap safety

• Very good accuracy, decent FPS for a pellet shooter and good usage of CO2

Cons:

• A bit on the pricy side $200+.

• The sights are a bit hard to see on certain darker backgrounds.

• The engravings on my airgun where a bit hard to see.

Comments:

The Umarex Colt Government 1911 A1 is a pleasure to own and shoot, you can really tell this is a quality gun from how smoothly it operates and the confidence it gives you even just holding it in your hands. This well made airgun has been around since the late 90's and even today holds it's own. It may not have a working blowback design or drop out magazine but as far as being a top notch airgun made for shooting and enjoying for years to come, it definitely succeeds in that category.

Buy Umarex COLT Government in Canada

Buy Umarex COLT Government in the US

Related Posts:

• UMAREX INTRODUCES THREE NEW REPLICA AIR PISTOLS - PPQ - S&W M&P 45 - S&W M&P R8 REVOLVER

• UMAREX WALTHER PPQ BB AND PELLET CO2 PISTOL

• MORE DETAILS ON THE UMAREX WALTHER PPQ - S&W M&P 45 - S&W M&P R8

• MORE PHOTOS OF THE UMAREX WALTHER PPQ

• MY UMAREX WALTHER PPQ CO2 PELLET PISTOL ADVENTURE

Type: Pellet & BB air pistol.

Manufacturer: UmarexUSA.

Model: Walther PPQ.

Materials: Plastic (polymer) and metal construction.

Weight: 1.37 pounds.

Barrel: 3.9 inches, metal rifled.

Propulsion: CO2 x 1.

Action: Semi auto, double action only.

Ammunition Type: .177 caliber Pellets and 4.5mm BB's.

Ammunition Capacity: 8 shot rotary magazine.

FPS: 360.

Trigger Pull: The trigger pull on the Umarex Walther PPQ is a bit on the heavy side with most of the effort at the beginning and middle stages, right near the release point it does seem to lighten up a great deal making it easy to put pellets on the target. Just don't expect the PPQ to be the quickest rapid fire gun on the block because of this.

Accuracy: I shot this air pistol at a target from 20 feet away in a free standing position, and it performed well getting an impressive 1.5 inch grouping very close to the center of the target. The sights can be adjusted for windage if your aim is off to one side or the other. My Chrony Chronograph testing using 6.9 grain lead pellets fluctuated between 300 and 360 fps.

Build Quality: This is an almost all external polymer air gun with a good deal of metal components on the inside giving the Walther PPQ a decent overall weight and heft. Some of the external metal parts worth noting are the safety switch, slide release, and trigger. The fit and finish is very good on the PPQ and the plastic is the good stuff - there is a difference!

Realism: The Umarex Walther PPQ is a licensed replica of the real Walther PPQ semi auto pistol. It is a very close looking copy with the exception of some of the trade marks (P99 Q instead of PPQ). There is a lot of attention to detail that helps make this gun very believable!

Provided by: UmarexUSA.

Pros:

• Very reasonable price for a well made full featured airgun.

• Excellent reproduction of the real Walther PPQ semi auto pistol.

• Shoots both pellets and BB's.

• Rifled barrel.

• Easy to use yellow dot sights adjustable for windage.

• Slide catch and safety are realistic and functional.

• Well designed CO2 access both hides the CO2 and makes it easy to install.

• Good combination of power, accuracy and CO2 efficiency (I got 80+ shots)!

• Even though there is a lot of plastic on the outside, there is a lot of metal on the inside giving this airgun some weight and heft.

Cons:

• The plastic exterior may put off some customers looking for metal guns.

• The trigger is a might bit heavy making rapid fire something you have to work for!

• The small .177 caliber viewable barrel port is a bit of a giveaway in terms of realism but may help a bit with fps.

Comments:

The Umarex Walther PPQ Pellet and BB CO2 air pistol took me a bit by surprise. Because the PPQ resides in the lower end price range, I was not expecting it to be as nice of an airgun as it turned out to be! The PPQ has a lot going for it: Shoots both Pellets or BB's, a rifled barrel, adjustable sights, good accuracy, decent power, efficient CO2 usage and good looks. These qualities make it very easy to overlook the mostly plastic exterior!

Buy the Umarex PPQ in Canada

Buy the Umarex PPQ in the US

Related Posts:

• UMAREX INTRODUCES THREE NEW REPLICA AIR PISTOLS - PPQ - S&W M&P 45 - S&W M&P R8 REVOLVER
• UMAREX WALTHER PPQ BB AND PELLET CO2 PISTOL
• MORE DETAILS ON THE UMAREX WALTHER PPQ - S&W M&P 45 - S&W M&P R8
• MORE PHOTOS OF THE UMAREX WALTHER PPQ
• UMAREX WALTHER PPQ CO2 PELLET & BB PISTOL REVIEW

I had a little adventure today. I needed to pick up an Umarex PPQ CO2 Pellet Pistol sent to me for review purposes by Umarex USA. The reason it was such an adventure was because Umarex USA was only able to send the PPQ Pellet Shooter to an address in the US and I live in Canada! No problem as I am very used to this No-Canada ship-to policy with many businesses. My work around is to ship to a warehouse in the US that specializes in shipping and receiving products for Canadians just like me.

I recently picked myself up a little 250cc Kawasaki KLX250SF Super Motard for doing my running around and today the weather was actually pretty good so I called up a riding buddy and out we went to pick up my Umarex Walther PPQ. The hardest part is actually getting into the US, if you say anything about business or picking "going to get something", you open yourself up to a hailstorm of questioning so you're always better off to go with the standard "I'm going shopping at the mall" or something like that. I have tried to be honest and every time it ends up being a three hour interrogation... 

So I made it across into the US and picked up my PPQ, stuffed it in my backpack, grabbed some Mexican food for lunch (it's always way better in the US), went for a joy ride, and then we headed back to Canada with my airgun tucked away securely in my backpack.

I know my airgun laws so I was not worried about crossing back into Canada, the worst that could happen at the boarder was getting pulled aside and asked to pay some duty and/or taxes. It was actually kind of funny because the boarder guard asked me to pull the gun out and hand it to him so he could check it out and make sure it wasn't a real gun or "Replica" non-shooting gun.

As I put my hand in the bag I said "do you want me to hand it to you", I wanted to makes sure I had not misheard him, that would have been an uncomfortable situation all around! I was thinking the whole time "I wonder what the people behind me are thinking" as we pass back and forth what looks like a real hand gun and then I just drive off like nothing happened.

Anyways, I have to say the Canadian boarder guards are generally really good about this kind of thing as long as you are honest with them and stay within the law of course.

So now I have this rather nice little pellet shooting Walther PPQ Replica to review for you all tomorrow! Make sure to check out my review! I plan on doing a full review complete with Chronograph fps and an accuracy shooting tests.

Buy the PPQ in Canada 

Buy the PPQ in the US