As you know I have been doing some reviews of my 22LR "Real Steel" guns and I added a couple more to the collection I want to share with you all. From my past experience, airguners also like the low cost 22LR guns for a variety of reasons including reduced operating cost, low recoil, lots of places to shoot them and so on...
I took both these guns to the gun range and put several hundred rounds through them and by the end they where both shooting very reliable using inexpensive box Blazer 22LR ammo. I stuck with this ammo because it seemed to be working well. The Chiappa 1911-22 was a bit pickier at first but I think it was mainly to do with a rather stiff magazine spring, making it difficult for the first couple rounds to chamber, again most of this sorted itself out by the end of the shooting day.
My ISSC M22 really performed well, the slide was a bit tight at first creating a few failures to chamber and eject but after a few magazines it settled right down and would hammer through all 10 rounds with no problems. I am really loving this little 22LR Glock replica!
Stay tuned for my full reviews on both of these guns and enjoy my Vimeo preview video for now!
Good things come in pairs so I figured I'd get a Glock 22LR to go with my 1911 22 LR and since I already had another rather nice ISSC 22LR product the ISSC MK22 SCAR 22LR I picked up something familiar and went with the ISSC M22 22LR Glock-Styled semi auto pistol.
From first inspection it is really well made pistol, very similar in design to a Glock but with a few differences like the hammer and safety but still close enough to satisfy many large caliber Glock shooters. I am looking forward to shooting this one for sure!
Yes this is mainly an Airguns and blank gun website but every time I post something regarding my 22LR Firearms, I get lots of great feedback and it seems airguners are also into the small caliber firearms for many of the same reasons... cheaper to buy and shoot, can also shot them in more locations. Less recoil means less fatigue at the end of the day too.
I don't have much to tell you about my recently purchased Chiappa 1911-22 Tactical 22LR semi auto pistol but I will be doing a review on it down the road just a bit so stay tuned. So far it looks pretty nice and has the size and weight of a 1911 45.
I wanted to get this video out to you a bit sooner but I have been really sick the past three days and so I have not had a lot of time to put this YouTube Video together. It's a pretty simple compilation of some photos and videos I took during my time walking around the 2012 SHOT Show in Las Vegas, not all of it is to do with airguns but most of it is. I even took a few touristy shots since it wasn't all work ;)
OK, so I took a day off to appease the wife and did some "shopping" but then today it was back to business and I made the wife come along for the ride, she was a good sport about it so it all worked out!
I went back to Umarex and Crosman, just to verify a few things, first of all, the Umarex P38 is in fact a blowback pistol and it has a nice 400 claimed fps. I am looking forward to testing this one!.
I also went back to Crosman to checkout the C51 and the C*TT to see if the C51 Glock-ish looking replica had a polymer frame which it does and also to see if the C*TT is blowback which it is not :( But it is mostly metal and has a working slide so there is hope for the C*TT.
I dropped by the ASG booth but there was nothing really new there. I already have pretty much all their 4.5mm BB guns but they do have a nice selection of Airsoft guns, and speaking of Airsoft guns I am spending a significant amount of my time these days looking into the Airsoft market and what I can bring into Canada for sale. I have been talking with several suppliers and we should have some nice offering for us Canadians shortly so stay posted on this one...
Lastly, I have a few 22LR guns coming my way that I will be reviewing. yes I know they are not airguns but whenever I review a 22LR gun, I get a lot of questions and if you are like me, and you have your PAL, the 22LR guns make a nice addition to your low cost guns that you can buy and shoot for a fraction of the cost of the larger caliber guns out there.
Today I stopped by Chiappa and checked them out. I have a 1911 Tactical 22LR on the way that I will be reviewing and I may get some more 22LR from Chiappa down the road if the 1911 reviews well. By the way I also have a 22lR M22 ISSC "Glock" styled pistol also on it's way for review!
Well that's it from the Vegas SHOT SHow 2012 for now, see you on the flip-side!
Action: Electronic trigger with 1-3-6 round burst & 300-340-600 Rounds Per Minute.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 900 rounds.
FPS: 360-500.
Trigger Pull: The trigger pull on the IZH Drozd Blackbird is nice and light due to the fact that the trigger is not mechanical but is instead an electronic on-off switch that operates a solenoid. The solenoid pulsates in turn hitting the CO2 valve release. This is how the single fire and burst fire rates are achieved, by means of electronics.
Accuracy: The Drozd Blackbird is designed to be a machine gun and so testing it in single shot mode for accuracy is kind of taking it out of its element. Even so it did reasonably well, but when when I flicked it over to full auto it actually seemed to tighten up and start grouping even more centered and closer together considering the vast amount of rounds coming out of the barrel all at once :)
Build Quality: This is a typical Russian made gun, all business and less importance put on looks but even so it is visually appealing, at least to me! Everything works exactly as it should and even though the main shell is made out of plastic, it's really more of a weapons grade polymer so there is no cause for concern here. There are a fair amount of metal components like the factory barrel, much of the magazine and many internal parts. This air gun is very durable!
Realism: The Baikal Drozd Blackbird IZH MP-661K is not a replica, but it does look like a sub machine gun of sorts, I'm really just not sure exactly what it looks like as it kind of has its own look. When you start shooting it, looks just don't seem to matter anymore, all you can think about is how much damage is happening down range.
A bit more accuracy in semi auto mode would have been nice.
On the pricey side.
Comments:
The Baikal Drozd Blackbird IZH MP-661K takes all the fun you get with the Classic Drozd and gives you even more fun. It may be one of the more pricy BB machine guns on the market but it is well worth the extra cost to get such a quality product that not only is great out of the box but can also be modified in so many ways to improve its performance and looks dramatically. If you are looking for the absolute top player in the BB Machine gun category then the Drozd Blackbird is the top contender with its excellent build quality and performance along with the nearly unlimited modifications available to make the Blackbird perform up to anyones standards.
My Vimeo Video Review for this Russian made Blackbird BB Machine gun:
I'm kind of doing this one backwards this time around. I was going to do the table top review of the Baikal Drozd Blackbird first but the weather was just too nice to pass up today to not get outside and give this gun a thorough testing.
I will be posting the table top review in a few days with all the specification (Here it is now) but if you're looking for some basic info on the Blackbird you can checkout our online store where you can find some statistics on the Drozd Blackbird and you can also checkout my Drozd Classic Review where I do a short comparison between the Drozd Classic and the newer updated Blackbird version.
I had a lot of fun shooting this gun, it lays down a lot of steel in a very short amount of time and has a virtually endless 900 round BB hopper that just keeps on going. During my testing I shot close to 400 rounds or more using one 88 gram CO2 cartridge and even near the end the Baikal Drozd Blackbird had pretty good feet per second performance.
My Baikal Blackbird does have some upgrades: (JimC Barrel, Full Auto-High RPM Mod Chip, Added Accessory Rails, Red Dot Scope, Tactical Light, Laser and Bulk Air kit) but the stock version is "almost" as fun :)
Thought I would share this photo of a Magazine doubler for his Umarex MP5K PDW one of my viewers (Daniel) sent to me. He lives in the UK and bought his from a supplier out his way. I don't sell them sorry but I have included an Amazon link for my US viewers.
Here it is by popular demend, a video of all my Air and Blank Guns, many of which where added in 2011. Thank you to everyone for your suport, without you all, this would not have been posible!
Here is a list of all my Air and Blank Guns so far...
Pistols BB:
Umarex PPK/S Nickel platted 4.5mm Blowback CO2 BB Pistol (Full Auto Mod).
Umarex PPK/S 4.5mm Blowback CO2 BB Pistol.
Umarex CP99 Compact 4.5mm Blowback CO2 BB Pistol.
Umarex CP99 Compact Recon 4.5mm Blowback CO2 BB Pistol.
Umarex H.P.P 4.5mm Blowback CO2 BB Pistol.
Umarex SA177 4.5mm Blowback CO2 BB Pistol.
Umarex Steel Storm 4.5mm Blowback CO2 BB Machine Pistol.
Umarex Makarov 4.5mm CO2 BB Pistol.
Umarex H&K USP 4.5mm CO2 BB Pistol.
Umarex Colt Defender CO2 4.5mm BB Pistol.
Umarex Colt Special Combat CO2 4.5mm BB Pistol.
Umarex Smith & Wesson M&P 4.5mm CO2 BB Pistol.
Umarex Beretta Elite II 4.5mm CO2 BB Pistol.
Baikal IZH MP-654K (Makarov) 4.5mm CO2 BB Pistol (Nickel).
Cybergun P226 X-Five 4.5mm Blowback CO2 BB Pistol.
Ammunition Type: .22 caliber pellets. (Also available in .177 caliber)
Ammunition Capacity: 1 round.
FPS: 400+.
Trigger Pull: The trigger pull on the Xisico XSP180 is amazing right out of the box. You actually have to be very carful because it doesn't take much to release it. I like mine setup this way but you can adjust it to your shooting style.
Accuracy: Very good, I was expecting to do much worse as I am far from a spring piston expert shooter. Even though I'm not as comfortable on the springers, I found the XSP180 easy to shoot even with the heavier spring piston kick. From 30 feet out I was able to get a tight 1 inch group shooting from a semi rested position. The Xisico XSP180 surprised me yet again with 470 fps average velocities even in the large .22 caliber version I was using.
Build Quality: The Xisico is priced on the lower end for a target pistol and because of this uses perhaps a bit more plastic then similar styled pistols. That said I found the plastic to be good quality and the gun had good overall weight to it. There are times when plastic is better suited then metal and I felt it was used well in this gun. Of course there is metal internally and externally but the main shell is primarily made out of plastic. All the moving parts worked well and felt nice and tight. I did not feel any concern that this gun would let me down.
Realism: The Xisico XSP180 is not a replica of any gun that I know of but it does have a modern look to it with its elongated design and ergonomic features.
I wasn't expecting the world from this spring piston break barrel pistol because it is a more price conscience gun and yes it may not be as refined as the Webley Alecto I also reviewed but I have to say it performed well and exceeded my expectations in most every way. First off, when the manufacturer claims 400 fps from the .22 caliber version this usually means the absolute best case scenario! I used medium grain pellets and still got some amazing chronograph results from this spring piston shooter right up into the 470 fps range. Secondly, being a springer with a heavy recoil, I figured it would effect my shot placement but again I was surprised and shot as tight a group as I can expect from any pistol with open sights from 30 feet out. lastly, again if you can get your head around the plastic, this gun feels well made and I would expect a lot of good times shooting with it for many years. If you're on a bit of a budget but want a compact shooter you can target shoot with or even take down small to medium sized pests, then grab yourself a Xisico XSP180.
Sometimes you just got to make a video because you can and because it's just plain old fun! And that's why I made this video of me shooting some cans with dual full auto BB machine guns. One is my full auto converted and trusted Cybergun Mini UZI and the other is my newly acquired ZMZ Tyrex PPA-K-01 Russian Machine Pistol.
One of my viewers sent some photos of his custom sanded and polished two-tone ASG STI Duty One 1911. Ken did an awesome job and it makes me want to do the same to mine :)
He started out by sanding off the paint with 500 grit sandpaper and working his way finer right up to 2000 grit and then finishing off with some Meguiar’s NXT Generation metal polish. The results are amazing - see for yourself!
I am pleased to announce that we have added another target shooter to the Replica Airguns Store and this one also does not require any CO2!
The Xisico XSP180 is a very close copy of the Diana P5 Magnum and is a spring action pistol that packs the power of an air rifle within its compact, lightweight body. At under 17" in length and weighing only 2.5 lbs, the XS180P reaches muzzle velocities of up to 500fps using .177 caliber pellets and up to 400fps using .22 caliber pellets.The XSP180 is packed with performance features.
The picatinny rail underneath the barrel provides many tactical options for the shooter. The competition style hand grips gives a comfortable, natural fit enabling better accuracy. Premier fiber optic adjustable sights as well as an auto/manual safety and adjustable trigger round out the long list of features.
Trigger Pull: The trigger pull on the ISSC MK22 is fairly short with a bit of noticeable break point in it but overall is pretty light. I get the feeling that this may be a striker based action because of the slight tension before the release.
Accuracy: I put about 300 rounds through the ISSC MK22 and took some time getting used to how it felt and also sighting in the sights on my 4 power scope. Once I felt comfortable I setup a new target and placed a full magazine (22 shots) all with in a 2 inch group from 20 yards out (60 feet). I was in a seated position using and elbow based rest. I was very happy with these results.
Build Quality: To me the ISSC MK22 SCAR clone feels like the real deal, it's not till you load it up and fire off a few rounds that you can even tell you are shooting the .22 caliber rimefire version. The MK22 has a lot of metal parts and the fit and finish is very good. You do have to use quality .22 caliber ammo in this guns for the best results because it can be a bit picky and also make sure to also take a bit of extra time when loading your magazines to ensure the ammo is set well to the back of the magazine. I'm not saying you can't use the cheap box ammo but you will have to be prepared to clear a few rounds from time to time.
Realism: It doesn't get any more real than this, the ISSC MK22 is basically an FN SCAR in a smaller cheaper .22LR caliber. But if you want to spend $3000 on the real thing and several hundred dollars per day at the range in ammo then get the full NATO round firing version. Unfortunately my pocket book does not allow for this and I don't think we can even get the larger caliber versions here in Canada. I also go to an indoor range that allows .22 caliber rifles to be used alongside the pistols which makes getting out and using the ISSC MK22 that much easier.
Purchased From: ???
Pros:
One fifth the price of the NATO round firing version to purchase and operate.
Mostly metal construction with good usage of polymer in the right places to keep it light.
Lots of rails to mount just about any type of accessory you can think of.
Nice high capacity 22 round magazine to keep the shoots going.
Versatile flip up multi position sights for pistol or rifle based target acquiring.
Fully adjustable stock with three length positions and check hight position, can also be folded in.
Most bad ass looking .22 caliber rimefire rifle around.
Not the Cheapest .22LR on the market in this category but well worth the added price tag.
Can be a bit picky about which bullet's you use in it and how you load the magazine.
The rear stock cheek rest is a bit high when using the pistol sights or a low rise scope, you may need a riser under your scope.
Comments:
As you know, I don't do a lot of actual "real gun" reviews, the ones that use gun powder and shoot lead bullets. I do have a very soft spot for the .22 caliber rifles for a few reasons. Firstly, they are usually more inexpensive to buy and also to shoot as the ammo is only a fraction of the cost of the larger caliber ammo. .22 rimefire guns can also be shot in more areas and at most gun ranges so you are more likely to get better use out of it in the long run. The ISSC MK22 FN SCAR clone is definitely the most impressive .22 caliber tactical styled rifle you can get, at least in Canada and even though it is at the top of the price rang in it's category it is well worth it because it is really a very high quality gun at a reasonable price.
My Vimeo Video Review for the ISSC MK22 FN SCAR Type .22LR:
As many of you may know, I don't just own a bunch of airguns and blank guns. They are one of my biggest passions but I also have my Restricted Firearms License here in Canada and I own several "Real" hand guns and rifles that I enjoy very much.
I have four .22 caliber rimfire guns and I have another one on its way - the ISSC MK22 SCAR .22LR, you may ask why I need another .22 rimfire? Well similarly to airguns, .22 caliber rimfire guns are relatively cheap to buy and operate compared to their big brother larger caliber versions. So I guess that draws me to them, they are just so fun to shoot and in a guilt-free kind of way. With large caliber guns I tend to head to the range with a preset amount of ammo that I am willing to part with and when it's all gone then it's time to switch over to the .22 calibers and go nuts! And not only that, our .22 caliber rimfire rifles do not have the magazine round restriction like our 5 round restriction on large caliber rifles.
For example, the ISSC MK22 SCAR .22LR that is on it's way costs a fraction of the price of the full on military version at around $650 Canadian, that might sound like a lot but the NATO round firing version goes for about $3000 and as far as I know is not even available in Canada to the average joe like me? And you will be counting ammo with one of these NATO round firing bad boys, at least I know I would be :)
I will be doing a full review of the ISSC MK22 SCAR 22LR so make sure to check it out if this type of gun interests you also.
Here are some of the specifications for you till I get a chance to review this awesome .22 tactical rifle!
Action: Electronic trigger with 1-3-6 round burst & 300-340-600 Rounds Per Minute.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 30 rounds.
FPS: 360-500.
Trigger Pull: The trigger pull on the IZH Drozd is nice and light due to the fact that the trigger is not mechanical but is instead an electronic on-off switch that operates a solenoid. The solenoid pulsates in turn hitting the CO2 valve release. This is how the single fire and burst fire rates are achieved.
Accuracy: When I was sighting the Baikal Drozd in I got several 5 shot groups well within 1 inch 30 feet out from the target. But when I did my actual video accuracy test, the Drozd did not perform as well, getting more like a 2 inch group, still very reasonable for a gun that can shoot 600 rounds per minute out of the box and 1200 rounds per minute when modified. With metal streaming out the barrel like that you are pretty much going to hit what ever you point it at, the odds are in your favor!
Build Quality: This is a typical Russian made gun, all business and less importance put on looks but even so it is visually appealing, at least to me! Everything works exactly as it should and even though the main shell is plastic it is really a weapons grade polymer so there is no cause for concern here. There are a fair amount of metal components like the factory barrel, most of the magazine and many internal parts.
Realism: Again, the Baikal Drozd IZH MP-661K is not a replica, but it does look like a sub machine gun in many ways, I'm really just not sure exactly what it looks like but when you are shooting this gun you really don't think much about this point because you are too busy grinning!
Rear stock can get lose sometimes (just add some tape to tighten it up a bit).
Comments:
The Baikal IZH MP-661K is one of the most fun BB machine guns out there and well worth the extra cost to get such a quality product that not only is great out of the box but can also be modified in so many ways to improve it's performance and looks dramatically. Sure the Baikal IZH MP-661K now has a big brother, the Drozd Blackbird, but the Blackbird may be just a bit of overkill for some, I kind of like the Drozd Classics more compact size and if you can't nail what your shooting at with 30 rounds then your doing something very wrong! The Drozd is really the epitome of extreme BB gun weaponry!
My Vimeo Video Review for this Russian made BB Machine gun:
The Webley Alecto (AKA: Zoraki HP-01) may not fit in exactly as a "Replica" Airgun, although it does resemble a bloated Dessert Eagle! But it is an Airgun worthy of spending some time reviewing an this is now my third Vimeo Video review for the Webley Alecto. My first Video Review was a Table Top Review where I covered most of the Webley's basic operation. My second Vimeo Video was a Chronograph Test to see what my Webley Alecto could do performance wise for FPS.
I really wanted to do a video of this gun just shooting because that's what it does best, put lead down range very accurately! So I setup three cameras to capture it all from just about every angle I could think of and I set up 30 feet away from my target and shot 5 rounds in a rested position using a Red Dot Scope. The results where not surprising - pretty close to a 1/2 inch grouping!
If you're looking for a compact, hard hitting, accurate target or small pest control Air gun then look no further, the Webley Alecto has the goods!
Watch the full Multi-angle Vimeo Video of my Webley Alecto Shooting Test:
I can't help but share some of the photos my happy viewers and customers send me and it seem like the hot item right now is the Cybergun Tanfoglio Witness 1911 CO2 BB Pistol yet again.
These latest photos are brought to you by Mil3 who added rubber grips and an accessory rail to his Tanfoglio Witness 1911. He said the rubber grips only needed some slight carving out on the back side to make them fit.
I've had a few questions about replacing the gips on the Cybergun Tanfoglio Witness 1911 BB pistol and if it is possible to use standard 1911 wood grips? The answer is yes if you don't mind spending about 15-20 minutes removing just a bit of the wood material in a few spots on the 1911 Wood Grips
Here are the instruction thanks to one of my Customers and viewers Michel:
First of all the holes are in the right place thank god for that! A dremel is the ideal tool youll need, and the whole mod.
Mark out the material you want to remove.
Remove the material on bottom part of each grip with a dremel using a cicular sandpaper bit.
Repeat on other grip .On the top of the grip on the mag release side you might have to remove material to clear pin.
After on the other side of the mag release button make sure there is enough clearance for when you depress the button.
