Entries in .22 cal,Gas

KJWorks KP-11 - Cybergun FNX -45 Tactical Airsoft Pistol Preview

No Comments

Another Airsoft Pistol Preview Video to share with everyone. First up we have a nice lighter weight CO2 powered 1911 from KJWorks called the KP-11 The lower receiver is polymer which helps to keep this gun a little bit lighter all around but it still has good weight to it coming in at a little over 2 pounds, the grips are larger than some 1911's since the KP-11 has a double stack style full size drop out metal magazine. You will also find some nice Tactical upgrade like adjustable white dot sights, a lower rail for accessories and milled trigger and hammer.

I also show off an interesting and not all that common pistol from Cybergun, the FNX -45 Tactical in Gas Blowback. For import into Canada it ships with a longer barrel  which stick out of the front of the gun but it also comes with a shorter barrel you can install after your receive it. The Longer barrel gives the Cybergun FNX -45 Tactical Airsoft Pistol the extra velocity to allow it to be Canada import ready. The FNX -45 Tactical is a really detailed and well built Airsoft Pistol. By the way the FNX -45 Tactical is also availabl in Dark Earth color.

Here are some of the specifications for the KJWorks KP-11 and Cybergun FNX -45 Tactical Airsoft Pistols:

KJWorks KP-11 CO2 Blowback Airsoft Pistol :

  • Ammo Type: 6mm Airsoft BB's.

  • Ammo Capacity: 28 Rounds.

  • Action: Single action only Semi auto.

  • Power Source: 12 gram CO2.

  • FPS: 366.

  • Weight: 2.2pounds (980 gram).

  • Length: 8.66 inches.

Cybergun FNX -45 Tactical GBB Airsoft Pistol :

  • Ammo Type: 6mm Airsoft BB's.

  • Ammo Capacity: 25 Rounds.

  • Action: Single and double action Semi auto.

  • Power Source: Green Gas.

  • FPS: 380 with long barrel.

  • Weight: 1.8 pounds (820 gram).

  • Length: 8.66 inches.

 
Categories: 6mm, Airsoft, Blowback, CO2, GBB, Gas, Pistol, Review, Semi Auto, YouTube Video Tags: Cybergun, FNX -45 Tactical, KJWorks, KP-11

KJWork KC-02 Version 2 10/22 Gas Blowback Airsoft Carbine

No Comments

Type: Airsoft Rifle.

Manufacturer: KJWorks

Model:KP-02 Version 2

Materials: Metal and Nylon Fiber build.

Weight: 5.84 Pounds (2650 Grams).

Barrel: 13 inch metalnon-rifled smooth bore.

Propulsion: Green gas or 12 Gram CO2 dependant on magazine used.

Action: Blowback,Single action only.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 29 rounds.

FPS: 410-440 fps

Trigger Pull: The trigger pull on the KJWork KC-02 Version 2 10/22 Gas Blowback Airsoft Carbine is pretty much exactly like a real Ruger 10/22, nice and short, not to light or heavy, crisp and single action only. If you already have a Ruger 10/22 and want to pickup this Airsoft version for some anytime shooting then you will not be disappointed in the trigger since it is already what you are used to.

Accuracy: I decided to setup my paper target a little further out than my standard 30 feet, so I took it back to around 50 feet and put around 24 shots into it in a fairly quick succession from a rested position. The KJWork KC-02 Version 2 10/22 Gas Blowback Airsoft Carbine grouped continently and well centred on target getting around a 3 inch grouping. This was using a red dot scope but with the out of the box hop-up setting in place. I was a little bit surprised by my fps results as my Chronograph recorded an impressive 445 average 5 shot fps using the lower powered green gas magazine. All shot where within only a few fps of each other too! I can only imagine how hard this gun would shoot using the alternative CO2 Magazine. Blowback action was just enough to give some feedback and of course allowed for the bolt to cycle giving the KJWork KC-02 Version 2 10/22 Gas Blowback Airsoft Carbine a true single action trigger pull.

Build Quality: The build quality for all KJWork KC-02 Version 2 10/22 Gas Blowback Airsoft Carbine is very good with a nice weight and feel to it, It really does feel like I am holding a real Ruger 10/22 and it is one of the most popular semi auto 22LR rifles out there for a reason. Mechanically this Ryger 10/22 copy works great, super consistent and very responsive. The fit and finish as with all KJWorks guns is top notch.

Realism: The KJWork KC-02 Version 2 10/22 Gas Blowback Airsoft Carbine is for all intents and purposes simple an Airsoft version of the Ruger 10/22 and even though I have no way to confirm this, I would imagine many 10/22 after market accessories may actually work with the KJWork 10/22 Gas Blowback Airsoft Carbine. Everything works just like it would on a real 10/22 without the loud noise and ejecting shells.

Available in the:Replica Airguns Store

Pros:

  • Built on the very popular 10/22 platform so lots of people are going to be very familiar with this rifle and may want an Airsoft version they can shoot just about any time they feel like it.

  • Good weight and feel to it.

  • Blowback semi auto action with true single action trigger.

  • Lots of rail access points for tons of add on accessories.

  • Pop-up fully adjustable sights stay out of the way but are ready to go when needed.

  • Easy to adjust Hop-up.

  • Available magazines in both CO2 and Green Gas.

  • Adjustable AR styled rear stock with AR pistol grips.

  • Sling mounts included.

  • Works with standard Airsoft screw on flash hider or suppressors.

  • Awesome FPS and consistency.

  • Very accurate even at 50 feet, around a 3 inch 25 shot grouping.

Cons:

  • No full auto mode.

  • Higher capacity mag would have been nice.

  • Would be nice to have a higher capacity magazine for it.

Comments:

I am really impressed with the KJWork KC-02 Version 2 10/22 Gas Blowback Airsoft Carbine! It feel and shoots a lot like the real steel version but with less noise and recoil. For back yard shooting fun and practice you can not find a cheaper gun out there to simulate shooting your real 10/22 and of course this rifle used on an Airsoft field would be a perfect fir for almost any shooting environment since it is light, compact, accurate and powerful. I think I found my newest favorite Blowback Airsoft Rifle :)

My Vimeo Table Top  Review of the KJWork KC-02 Version 2 10/22 Gas Blowback Airsoft Carbine:

 
Categories: 6mm, Airsoft, Blowback, CO2, Field Test, GBB, Gas, Review, Rifle, Scope, Semi Auto, YouTube Video Tags: KC-02 Version 2, KJWorks, Ruger 10/22

Mike's Personal Guns for Sale - Airsoft Pistols

No Comments

Some more of my Personal airgun pistols for sale! I am showcasing here on the Replica Airguns website and over on the Replica Airguns YouTube channel a series of videos I am making for the purpose of selling some guns out of my personal collection. I simply have to make room for the new guns I will be testing and reviewing for everyone, my collection has gotten a little bit out of hand and needs to be thinned down a bit :)

In this 6th Mike's Personal Guns For Sale video, I am offering three of my Airsoft pistols, the super popular Dan Wesson 6 Inch Silver in pretty much brand new condition complete with the box, manual, speed loader and shells. I also have tow rather hard to get Airsoft guns that are in somewhat limited working condition and need a little TLC. But the simple fact that they are not easily obtained here in Canada does bring up their value a little bit.

Make sure to watch my above YouTube video to see these Airsoft Pistols I am selling and instructions on how you can take part in the sale and purchase of them. By the way I am only selling to Canadian residents since shipping cross borders is a little sketchy.

Here is a list of the Airsoft Pistols I am selling from my personal gun collection:

ASG Dan Wesson 6 Inch Silver Airsoft Revolver - $145

Tokyo Marui GBB Desert Eagle .50AE Airsoft Pistol - $150

KSC M11A1 GBB Airsoft Machine Pistol - $150

Categories: 6mm, Airsoft, Blowback, CO2, Full Auto, GBB, Gas, Pistol, Revolver, Semi Auto, YouTube Video Tags: ASG, Dan Wesson, Desert Eagle, KSC, M11, Mac 11, Tokyo Marui

Mike's Personal Guns For Sale - Pellet Pistols

No Comments

Yes, I have more of my personal guns for sale, now we are getting into the pistols! I am showcasing here on the Replica Airguns website and over on the Replica Airguns YouTube channel a series of videos I am making for the purpose of selling some guns out of my personal collection. I simply have to make room for the new guns I will be testing and reviewing for everyone, my collection has gotten a little bit out of hand and needs to be thinned down a bit :)

In this 5th Mike's Personal Guns For Sale video, I am offering some of my pellet pistols in a variety of models ranging from some classic Crosman SAA .22 caliber revolvers to more modern CO2 blowback pistols like the Umarex Beretta PX4 Storm

Make sure to watch my above YouTube video to see these Pellet Pistols I am selling and instructions on how you can take part in the sale and purchase of them. By the way I am only selling to Canadian residents since shipping cross borders is a little sketchy.

Here is a list of the Pellet Pistols I am selling from my personal gun collection:

Crosman Model 44 Peacemaker SAA CO2 Pellet Revolver - $175

Umarex Beretta Mod 92FS CO2 Pellet Revolver - $215

Gamo R77 Combat 4 Inch CO2 Pellet Revolver - $165

Gamo PT-85 Blowback CO2 Pellet Pistol - $90

Umarex Beretta PX4 Storm Blowback CO2 Pellet Pistol - $90

Umarex Walther CPSport CO2 Pellet Pistol - $115

Valtro Airgun 92 CO2 Pellet Pistol - $115

Kimar Crosman CK92 Black CO2 Pellet Pistol - $115

Crosman Model 1088 CO2 Pellet Pistol - $55

Categories: .22 cal, 4.5mm / .177 cal, Blowback, CO2, Pellet, Pistol, Revolver, Semi Auto, YouTube Video Tags: 1088, Beretta M 92 FS, CK92, CPSport, Crosman, Gamo, Kimar, PT-85, PX4 Storm, R77 Combat, Umarex, Valtro Airgun 92

Mike's Personal Guns For Sale - PAL and Paintball

No Comments

I am showcasing here on the Replica Airguns website and over on the Replica Airguns YouTube channel a series of videos I will be making for the purpose of selling some guns out of my personal collection. I simply have no more room for the new guns and in some cases I either have duplicate guns or very similar versions so there is no need to have both. Some guns I am less attached to and as I already stated I need to make room for some of the new stuff I will be reviewing and or buying for myself.

In this second Mike's Personal Guns For Sale video I am offering three rifles, two of which will require a Canada PAL Firearms License since one is a 22LR rimfire rifle and the other is a high powered .22 caliber break barrel pellet rifle. The last item up for bid is an AK-47 styled .68 caliber paintball rifle.

Make sure to watch my above YouTube video to see these three rifles I am selling and instructions on how you can take part in the sale and purchase of them. By the way I am only selling to Canadian residents since shipping cross borders is a little sketchy.

Here is a list of the these three rifles I am selling from my personal gun collection:

ISSC MK22 22LR (FN SCAR) Rifle - $625 PAL Required

Benjamin Sheridan Super Streak .22 Caliber Break Barrel Rifle $250 PAL Required

Tacamo T68 AK-47 .68 Cal. Paintball Rifle $275

Categories: .22 cal, .68 cal, Break Barrel, Bulk Air, CO2, Paintball, Pellet, Real Gun, Rifle, Semi Auto, YouTube Video Tags: Benjamin Sheridan, ISSC MK22 SCAR 22LR, Super Streak, T68-AK, Tacamo

SHOT Show 2016 - Sig Sauer Interview

No Comments

In this 2016 SHOT Show Interview I talk with Dani Navickas from the Airgun division of Sig Sauer. Dani and I discuss Sig's new line of CO2 Blowback Pellet rifles and pistols. Dani talks about some of the behind the scenes information that went into the development and manufacturing of Sig's new line of CO2 Airguns.

Sig CO2 P226 and P250 Air Pistols along with their Sig MPX and MCX Air Rifles have been developed in house by Sig.Sig has been working very closely with a Japanese manufacturer to make sure that every stage of development is to Sig's high standards. The new Sig CO2 Blowback rifles and pistols are made to match the real steal version in almost every way including dimension, weight, functionality, materials used and even trigger pull.

Sig's new Sig MPX and Sig MCX Pellet Rifles have a brand new patented belt fed 30 round pellet magazine that is indexed via the internal blowback action of these rifles smoothing out the trigger action. The Sig P226 and Sig P250 pistols use a double ended 16 round pellet magazine similar to what you would find on Umarex's PX4 Strom blowback pellet pistol.

Look for Sig's new line of CO2 Blowback Pellet Airguns coming out shortly.

Categories: .22 cal, 4.5mm / .177 cal, Airgun News, Blowback, CO2, Pellet, Pistol, Replica Airguns News, Rifle, Scope, Semi Auto, YouTube Video Tags: SHOT Show, Sig MCX, Sig MPX, Sig Sauer, Sig Sauer P226, Sig Sauer P250

SHOT Show 2016 Teaser Video

No Comments

This is my SHOT Show 2016 Teaser Video! You will get to see some new gun highlights from companies like Umarex, ASG, Crosman, Sig Sauer, KWA and ISC. I will be following up this video with some interview videos very soon so do make sure to check back for those uploads. All I can say about the show is it’s huge! So much to see, so much walking and too much to take in…

ASG:

As always, ASG had some new products this year. The all new Dan Wesson 715 357 Magnum shell loading Revolver! This gun feels absolutely amazing in the hand and will be available in Steel BB, Airsfot and even Pellet shooting versions. Also new are the CZ P-09 and CZ 75 SP-01 Shadow Full Blowback BB and Airsoft Pistols.

Crosman:

Big at Crosman this year was their PCP Airbow, Crosman put a lot of focus on this product and even had a lot of crossbows on display to go with their new PCP Airbow. Crosman also introduced their low cost entry level Benjamin Maximus PCP rifle in .177 and .22 calibers offerings. Not really much in the way of replica pistols from Crosman this year, but then again last year was kind of the same?

Sig Sauer:

I finally made it to the Sig Sauer Booth this year to checkout their new CO2 Pellet gun line. All new Sig Airguns are made true to size and weight with similar trigger actions as their real steel versions. The Sig MPX is their more compact (shorter barreled) pellet shooting CO2 rifle with internal blowback and belt fed 30 round magazine. The Sig MCX is the longer barreled rifle version but built much the same as the MPX. Sig also introduced two new pellet shooting CO2 Blowback Pistols, the P226 and the P250. Both use similar double ended rotary magazines as the Umarex PX4.

Umarex:

Umarex always seems to have some new exciting Airguns products to offer at SHOT Show. The PPK is back with a few updates including no more ugly CO2 tab sticking out of the bottom! And yes the Beretta Model 92A1 will finally be shipping soon, I believe in February! My favorite product this year from Umarex would have to be the Full Blowback, Full size drop out magazine S&W M&P 40 CO2 BB Pistol. Umarex released yet another 1911 on the market, this version does come with a stick mag and sports pretty high fps and more shots per CO2 then the KWC based 1911’s. The super popular Colt SAA Revolver is now available in a pellet shooting version with a rifled barrel :) Umarex had on display another low cost revolver, the ultra futuristic looking Brodax CO2 BB Revolver.

KWA:

KWA always has really nice high quality products to showoff at there booth each year, we may even start carrying some of KWA's products this year, fingers crossed on that one… New to the KWA line are some AEG rifles with simulated blowback action, I really liked the Blowback AEG AK they had on display. KWA also released a new Airsoft shell loading revolvers that had some of the nicest looking brass and aluminum shells. On display under a glass cover was a very solid Gas Blowback Thompson Machine-gun with real wood stock, it was absolutely gorgeous!

ISC:

ISC known for their top quality AEG internals, had their full line of high quality Airsoft rifles on display. And new this year to ICS was their first ever Airsoft pistol, the blowback BLE Alpha. The BLE should be out mid year and looked and felt really nice. The trigger on it was super short and light.

I have some really awesome Interview videos I’m working on, I will be uploading them shortly so stay tuned for those…

Categories: .22 cal, 4.5mm / .177 cal, 6mm, AEG, Accessory, Airgun News, Airsoft, Airsoft News, BB, Blowback, Break Barrel, Bulk Air, CO2, Crossbow, Full Auto, GBB, PCP, Pellet, Pistol, Replica Airguns News, Revolver, Rifle, Scope, Semi Auto, Single Shot, Spring Piston, YouTube Video Tags: ASG, Crosman, ISC, KWA, SHOT Show, Sig Sauer, Umarex

Airgun Do’s & Don’ts

No Comments

When I say Airguns, I am referring to pretty much all BB, Airsoft, Pellet, Paintball and even Blank guns for most of the topics listed here.

Do’s:

  1. Treat your Airgun just like you would a real gun. If something goes wrong, perhaps the outcome will not be as severe but do you really want to take a trip down to your local emergency ward to get a BB or Pellet removed?

  2. Always assume your airgun is loaded, for some reason it always seems those empty guns are the ones that do the most damage.

  3. Be discrete, If it looks like a gun other people will think it is a gun so don’t flash your airguns around in public. Keep it in a case when transporting and shoot it in an area that will not alarm other people.

  4. Always wear eye protection when shooting your Airgun. Do you really want to shoot your eye out? No Joke!

  5. Be aware of your surroundings like windows, hard objects that could make your ammo bounce back at you. Make sure you are shooting your Airgun in a safe direction at all times, know your target and beyond.

  6. Use Airguns to teach others and learn how to safely and effectively shoot a gun. Airguns can be less intimidating then a real gun (Not so loud and very little recoil) and make for great start out and transitions guns.

  7. Use Airguns to get more inexpensive trigger time and become a more experienced shooter. Airguns cosy only pennies per round to shoot and can be shot in way more areas than a real gun can, practice makes perfect so get shooting!

  8. Use Airguns in areas where real guns may not be allowed or safe to use. Again, Airguns can be shot in all kinds of places, in your back yard or even in a properly setup indoor home range.

  9. Use Airguns with adequate power for safe and humane pest control where real guns may be prohibited.Airguns are quiet and less likely for the bullet to travel long ranges which makes them ideal for close range pest control in areas where real guns are too loud and to powerful.

Don’ts:

  1. Do not assume because it is an airgun it is not dangerous or simply a toy. Many Deaths have been caused by Airguns along with a lot of pain and suffering so treat your Airgun with respect. It is not a toy or you would find them in the toy department at your local store along with yo-yos and stuffed animals.

  2. Do not point or shoot at people unless of course you are using an Airsoft gun in an Airsoft field or facility. Yes Airsoft guns are meant to shoot at each other (with appropriate attire like eye protection and full body clothing), but steel BB and Pellet can cause serious injury especially at close range and on direct skin contact.

  3. Do not leave your Airgun loaded, you never know who is going to come across it and accidentally discharge it. Remember, a loaded gun is a dangerous gun in the wrong hands. You may know better than to assume the gun is undulated but children and even adults without any gun training will most definitely handle the airgun without consideration of the danger it poses.

  4. Do not use an Airgun for self protection. See my related video. Simply put, Airguns are not practical for self defense because they rarely have enough Stopping Power. The ones that do have enough power need to be pre-charged and in most cases are only single shot meaning if you miss or don’t get the job done no the first shot then you are done.

  5. Do not use an underpowered Airgun for pest control. See related video. Using a low powered BB pistol for pest control is cruel, you will only injure the animal making it suffer unnecessarily. Use a high powered pellet rifle to get the job done.

  6. Do not take your gun apart, in most cases this will void the warranty and the reality is that airguns rarely need to be cleaned since no dirty gun powder is used. lead pellet rifles may require occasional barrel cleaning to keep the rifled barrel free of debris.

  7. Do not over oil your Airgun, a little goes a long way and too much oil will just attracted dirt, use the right airgun oil and just enough to keep part functioning smoothly.

  8. Do not over pump an Airgun. Over pumping an Airgun can cause damage to valves and seals and in a worse case situation a rupture the air pressure reservoir or even cause the airgun to explode!

Categories: .20 cal, .22 cal, 380, 4.5mm / .177 cal, 6mm, 8mm, 9mm, AEG, Airsoft, BB, Blank Gun, Blowback, Break Barrel, Bulk Air, CO2, Full Auto, GBB, Gas, Multi-pump, PCP, Paintball, Pellet, Pistol, Repeater, Revolver, Rifle, Semi Auto, Single Shot, Spring Piston, YouTube Video Tags:

Can I use Airsoft BB's in my BB Pistol?

No Comments

Can I use Airsoft BB's in my BB Pistol? I would have to say this is by far the number one question I get asked in the comments section of my Vimeo videos. I have made several videos where this question gets addressed within the video but so far to date I have not made a stand alone video just covering Airsoft BB use in BB Guns.

So here it is, and now I have a video I can link to this so very common question, if you where wondering about this yourself than please watch my YouTube Video on this topic as it goes into a fair amount of detail about it.

The short answer to this question is no, you can not use 6mm Airsoft BB's in a 4.5mm Steel BB Pistol or Rifle. For the simple reason that 6mm is larger than 4.5mm and so the physical diameter of a6mm Plastic Airsoft BB is just to large to fit inside of a 4.5mm Steel BB magazine or barrel.

People have commented about using a 4.5mm plastic Airsoft BB in a 4.5mm BB gun and yes this could in theory be an option but I discuss why I feel this is not a good idea based on size and mass.

Categories: 4.5mm / .177 cal, 6mm, AEG, Airsoft, BB, Blowback, CO2, Comparison, Full Auto, GBB, Gas, Pistol, Revolver, Rifle, Semi Auto, YouTube Video Tags:

Top 10 Most Common Airgun Questions and Discussions

No Comments

Categories: .22 cal, .43 cal, .68 cal, 380, 4.5mm / .177 cal, 6mm, 8mm, 9mm, AEG, Airsoft, BB, Blank Gun, Blowback, Break Barrel, Bulk Air, CO2, Comparison, Full Auto, GBB, Gun Law, Gun Safety, Multi-pump, Non Airguns, PCP, Paintball, Pellet, Pistol, Real Gun, Revolver, Rifle, Semi Auto, Spring Piston, YouTube Video Tags:

ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol Table Top Review

2 Comments

Type: Blowback Airsoft Pistol.

Manufacturer: Socom Gear.

Model:MEU SOC 1911.

Materials: Almost all metal.

Weight: 2.3 pounds (1020 grams)

Barrel: Metal non-rifled.

Propulsion: Gas (Propane, Green Gas)

Action: Semi auto blowback, single action only.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 15 round full size metal magazine.

FPS: 300+

Trigger Pull: The trigger pull on the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol is I would have to say one of the nicest 1911 single action triggers I have tested so far. The take-up is very slight with an extremely light trigger pull required to release the hammer. Any lighter and I would say it would be too light and perhaps prone to accidental firing.The three hole tactical trigger extends out a little further than some 1911's but feels secure on the finger.

Accuracy: At this point I have not shot the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol but have high expectations based on the overall quality of this pistol and form other reviews I have read on this Airsoft 1911 replica. According to the manufacturers claimed fps, we should get somewhere right around 300 fps. The ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol has an adjustable rear sight for windage and we can take care of elevation using the adjustable hop-up so zoning in the Socom Gear US Marine MEU SOC 1911 to shoot dead center on target should not be too difficult.

Build Quality: The ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol is one of those Airguns that really catches your eye, and once you pick it up and hold it in your hands you discover that not only does it look really great but it also feels really great in your hands! The tolerances of the parts are excellent, everything mechanical is smooth without any friction and you can even see the texture of the metal grain through the quality matt black powder finish.

Realism: The ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol is a a fantastic replica of a real steel MEU SOC 1911 used by the US Marine Corps' Marine Expeditionary Unit (MEU). The balance and weight really make this 1911 Airsoft pistol feel like your holding the real deal, all the mechanic parts function as they would compared to the original and the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol is fully field stripable.

Available From: The Replica Airguns Store.

Pros:

  • Heavy full blowback action.

  • White dot sights (Adjustable for windage).

  • Super light single action trigger.

  • Ambidextrous safety and working grip safety.

  • Full size metal dropout magazine.

  • Excellent quality, durable black powder coat matte finish .

  • Enhanced Pro-Grip with brass marine inserts

  • MEU SOC 1911 Licensed.

  • Three hole tactical trigger with skeleton hammer.

  • Comes in a hard shell case with Gemtech Outback II 5-inch silencer and lanyard.

  • Rail for adding accessories. 

Cons:

  • FPS is kind of low for Canada Market so not one we can regularly get in stock.

  • A bit on the pricy side.

  • No option of CO2 magazine.

Comments:

With all the BB and Airsoft 1911's out there what makes the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol stand out from the rest. First off it feel the most believabel when holding it in your hand, it seems ot have that perfect weight and balance that is often hard to replicate in an Airgun. With features like enhanced Pro-Grips with brass marine inserts, MEU SOC 1911 licensing, three hole tactical trigger, ambidextrous safety, super smooth and light single action trigger, White dot adjustable sights and the included hard shell case with lanyard and Gemtech silencer you can not go wrong with the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol.

My Vimeo Video Review for the ASG Socom Gear US Marine MEU SOC 1911 GBB Airsoft Pistol:

Categories: 6mm, Airsoft, Blowback, Comparison, GBB, Gas, Pistol, Review, Semi Auto, YouTube Video Tags: ASG, Colt Government 1911, Model 1911, Socomgear 1911

ASG - Marushin Chrome Derringer 6mm Gas Airsoft Pistol Field Test Review

No Comments

During this Field Test Shooting Review Video I test out the ASG - Marushin Chrome Derringer 6mm Gas Airsoft Pistol by shooting some rounds through the Chronograph to get an idea on how powerful  it really is. I also step back 30 feet and place some rounds down range on my paper target to see just how accurate this little surprise double shot Airsoft pistol is.

In terms of power, all I had to go on was the factory claimed power rating of .6 joules. So I filled up the ASG - Marushin Chrome Derringer 6mm Gas Airsoft Pistol with Propane gas, loaded two .20 gram BB's and shot them both one after the other though my Chrony. I did find that topping up the gas was necessary between loading this gun as the gas chamber is very small. You will only get three shots out of a fill but the last shot is really slow.

I did find that I consistently got right around 250 fps on the fist shot and pretty much bang on 200 fps for the follow-up shot. Not super fast but fast enough to hit a small paper target 30 feet away pretty much every shot. Shooting 6 rounds on my paper target from 30 feet back using a semi rested position I was able to get 5 out of 6 shots pretty well placed on my paper target. I am not sure what happened to the 6th shot but it seemed to hook really hard to the right, perhaps the Airsoft BB was deformed? My 6 shot grouping with the excepting of the one shot that went MIA ended up being about 5 inches, not bad for such a small little low fps pistol.

So in terms of usefulness what can you expect from the ASG - Marushin Chrome Derringer 6mm Gas Airsoft Pistol? Well you are for sure not going to be sniping anyone with it but it could for sure come in handy as a surprise back for your backup gun!

Categories: 6mm, Airsoft, Field Test, Gas, Pistol, Review, YouTube Video Tags: ASG, Derringer, Marushin

ASG - Marushin Chrome Derringer 6mm Gas Airsoft Pistol Table Top Review

No Comments

Type: Airsoft gas pistol.

Manufacturer: Marushin (Distributed by ASG).

Model:Derringer.

Materials: Plastic with some metal parts.

Weight: .5 pounds (215 Grams).

Barrel: Metal non-rifled.

Propulsion: Gas.

Action: Over-under double barrel single action only.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 2 rounds.

Energy: .6 Joules.

Trigger Pull: The trigger pull on the ASG - Marushin Chrome Derringer is single action only so you will have to cock the hammer separately for each of the two shots. The action of the single action trigger is extremely short with virtually no take-up to speak of. The trigger pull is also very light.

Accuracy: This part of the review is yet to be determined as I have not done my Field Test or Shooting tests for this pistol. I will put a link in here when I have done my official Field Shooting Test. I have done a little bit of playing around with the ASG - Marushin Chrome Derringer 6mm Gas Airsoft Pistol and can say it is not going to be the most accurate or powerful gun out there but that's not really what this ultra compact gun is meant for, more of a surprise, hey where did that come from kind of gun!

Build Quality: The ASG Chrome Derringer 6mm Gas Airsoft Pistol is built by Marushin and as a Japanese based company it is going to be mostly plastic but with that said this little pistol is built really well, the mechanical parts that need to be metal are, like the grips hammer, trigger, safety and many of the pins and screws. Everything is tight and the tolerances are excellent. The finish is also pretty much flawless.With the added metal parts this .5 pounds pistol actually feels pretty solid in the hand and it's hard to tell so much of it it is actually plastic.

Realism: The ASG - Marushin Chrome Derringer 6mm Gas Airsoft Pistol looks the part of a real steel Derringer in terms of size and mechanical parts all functioning as they would. Even the over-under barrels are recessed to look like a much larger caliber than 6mm. The only real give away would be the small gas valve located under the handle and of coursee the lighter weight.

Available in: The Replica Airguns Store.

Pros:

  • Nice ultra compact and light weight size.

  • Flawless chrome finish to it.

  • Not a lot of meat parts but the metal grips, hammer, trigger and safety seem to add enough weight to make this Derringer feel pretty solid in the hand.

  • Nice recessed over-under barrels.

  • Mechanical part feel solid and tight.

Cons:

  • Main gun build is plastic, typical of Marushin guns.

  • Not a lot of power from my preliminary testing.

  • Only 2 shots so make them count! 

Comments:

The ASG - Marushin Chrome Derringer is a rather unique 6mm Gas Airsoft Pistol and is not going to make a very good primary weapon or for that matter even a good secondary weapon, but on that off chance you want surprise on your side then this little guy would make a really great last resort gun for when you only have that one shot up close and personal and it's now or never... There's also the fact that it's a Derringer and how cool is that! 

My Vimeo Table Top Video Review for this ASG Chrome Derringer 6mm Gas Airsoft Pistol:

Categories: 6mm, Airsoft, Comparison, Gas, Pistol, Review, YouTube Video Tags: ASG, Derringer, Marushin

KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol Field Test Review

No Comments

This is my Official Field Test Shooting Review video for the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol. You can also checkout my Table Top Review where I go into more of the specifications and features of this fine KJWorks pistol and show you around the Sig Sauer P226 Airsoft gun and even do a Field Strip of it.

In this Field Test Shooting video I test out the performance of the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol using my Chronograph to get a real world (FPS) Feet Per Second rating. I also position myself 30 feet back and shoot 10 rounds at a paper target using a semi-rested shooting position (Sand bag up front and standing in the back).

In terms of velocity the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol shot a bit on the fast side at 414 FPS when averaging a 5 shot strong using .20 gram BB's with a brand new CO2. Keep in mind I was using the CO2 magazine which will have more power than the Gas Magazine version. I would assume the Gas mag version would shoot right around the mid 300's which may be more suited for indoor Airsoft games. For outside Airsoft wars you may want the extra power of the CO2 mag for shooting at targets further distances out.

Stepping back 30 feet and shooting at my paper target, the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol produced a decent 2 inch 10 shot grouping that was just a hair low but well centered left and right. The low factor could be adjusted up using some Hop-up tweaking. The trigger in single action mode is light and the release is crisp. Even the double action trigger is fairly light for double action, but there is a lot more take up since your finger is doing all the work that the blowback action would normally do for you when shooting in single action.

With the heavy blowback and high FPS the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol creates a really great shooting experience. It would be great for some target practice, getting some additional trigger time in if you are a Sig Sauer P226 owner and would make an excellent outdoor Airsfot war backup weapon. The quality is excellent and as a lover of the Sig Sauer lineup of guns I highly recommend this Airsoft pistol from KJWorks.

Categories: 6mm, Airsoft, Blowback, CO2, Field Test, GBB, Gas, Pistol, Review, Semi Auto, YouTube Video Tags: KJWorks, KP01-E2, Sig Sauer P226

KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol Table Top Review

No Comments

Type: 6mm Plastic BB Airsoft Pistols.

Manufacturer: KJWorks

Model:KP01-E2 Sig Sauer P226

Materials: Metal slide & frame.

Weight: 2 pounds (920 grams).

Barrel: Metalnon-rifled smooth bore.

Propulsion: 12 Gram CO2.

Action: Single and double action.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 26 rounds.

FPS: 350-400 fps

Trigger Pull: The trigger pull on the KJWorks KP01-E2 Sig Sauer P226 Airsoft Replica is good in both single and double action. Once the slide is pulled back and released the first round is chambered and the hammer will remain back placing the KJWorks P226 in single action mode, the pull is light and the take-up is nice and short, most of your shots will be in single action mode unless you use the de-cocker to lower the hammer for a subsequent double action follow-up shot, double action shots are still pretty light but much longer in order to cock the hammer back.

Accuracy: (I have not shot the KJWorks distributed CO2 Mag version but I have already done a Field Test Shootinng Review for the same KJWORKS gun distributed and licensed by Cybergun in the Gas Mag version. Here is what I had to say about the Cybergun Gas Magazine version: "Shooting the Cybergun Sig P226 from 20 feet out in semi rested position I was able to get very good results. I placed 10 rounds in about 1.5 inches with the shot placement being a bit low possibly due to my barrel mod, adjusting the hop-up may bring the aim point back up to where it should be. The Sig Sauer P226 Airsoft Replica shot right around the 316 fps range while conducting my 5 shot average chrony testing which was lower than advertised but I was using much heavier .20 gram BB's. You can expect to get a full magazine worth of shots out of each gas fill-up but I did notice that as the magazine got colder it did tend to become much less efficient and also seemed to vent a lot of vapor."

Build Quality: The build quality for all KJWorks guns in my opinion is one of the best in the business. Fit and finish is top notch with close tolerances in the working parts as you would find in a real steel gun. The paint is excellent and in general will wear much better than other Airsoft guns out there. The KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol is pretty much all metal and feels it, the recoil spring is nice and firm and all working parts are smooth and crisp when operated.

Realism: The KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol is a replica of the real steel Sig Sauer P226 with the exception of the licensing. The KJWorks KP01-E2 really is a great looking and functioning Airsoft Replica. You can field strip this gun exactly like a real Sig Sauer and all the mechanical parts work just the same including a working de-cocker and adjustable front sight. It is really hard to distinguish the Airsoft version from the real Sig P226 in both looks and feel.

Available in the:Replica Airguns Store

Pros:

  • All metal pistol with good overall realistic weight to it.

  • Very crisp and firm full blowback operation.

  • Some of the best fit and finish in the industry. Especially in price range.

  • Nice accurate looking and working Sig Sauer P226 Replica.

  • Working de-cocker.

  • White dot sights for quick target acquisition.

  • Front sight is adjustable for windage.

  • Full size drop out magazine holds Airsoft BB's and CO2.

  • Fully field strip-able.

Cons:

  • No actual Sig Sauer Licensing but very clean look.

  • CO2 Mag does stick out a bit and add to size

Comments:

I am a huge Sig Sauer fan so I have kind of high expectations with a replica gun! The KJWorks lineup as a whole is really fantastic, and what I say about the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol can be said about the entire lineup. KJWorks makes a super well built product that replicates the real steal version almost exactly other then they shoot Airsoft BB's instead of actual bullets. When holding a KJWorks gun in the hand you can feel the quality, in weight, ballence and especially when operating the slide, trigger and other working parts. Everything just feels so perfect and responsive. For the money you can not go wrong with the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol or any other KJWorks gun for that matter.

My Vimeo Table Top  Review of the KJWorks KP01-E2 (Sig Sauer P226) CO2 Blowback Airsoft Pistol:

Categories: 6mm, Blowback, CO2, Comparison, GBB, Gas, Pistol, Review, Semi Auto, YouTube Video Tags: KJWorks, KP01-E2, Sig Sauer P226

First Person Shooting Clay Pigeons with KJWorks M9A1 and 1911

1 Comment

This First Person Shooting Clay Pigeons Video with my KJWorks M9A1 and 1911 Airsoft Pistol is to serve two purposes: Number one and really the only reason needed to make a video like this... To get outside on a nice warm summer day and practice some tactile shooting all while recording it in first person so you can come along and enjoy it with me :)

Secondly I wanted to inform everyone that the video uploads will be a bit lighter for the next week or so since I am on what I call a working holiday. I am focusing on a Fitness Contest this weekend along with a Fitness Expo the following weekend, nothing to do with Replica Airguns but it does coincide with my other Website and YouTube channelGetFitOver40.com. The Fitness contest is the Victoria Cup where I will be competing in the Men's Physique (Masters - Over 40) and (Open - All Ages) divisions. The Fitness Expo is called "theFitExpo" and it is in Anaheim California.

So if you want to watch more of my videos then you will have to checkout my other fitness channel for the next week where I will be posting lots of related content on what's going on fitness wise in my life right now.

Categories: 6mm, Airsoft, Blowback, CO2, Field Test, GBB, Gas, Pistol, Replica Airguns News, Semi Auto, YouTube Video Tags: KJWorks, M9A1, Model 1911

KJWorks CO2 Airsoft Full Metal M9 - M9A1 Table Top Review

3 Comments

Type: Blowback Airsoft Pistols.
Manufacturer: KJWORKS.
Model: M9 & M9A1
Materials: Metal slide & frame.
Weight: 2.1 pounds (950 grams).
Barrel: Metal non-rifled smooth bore.
Propulsion: 12 gram CO2.
Action: Blowback, Single and double action.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 24 rounds.
FPS: 360+ fps.

Trigger Pull: The trigger pull on the KJWorks Beretta M9 & M9A1 is very good in both single and double action. Double action is a bit longer and heavier than when shooting in single action but not heavy by any means. Single action shooting is short, light and crisp as you would expect when shooting a real steel Beretta 92 style pistol.

Accuracy: I have not done my actual Field Test Shooting video review for the KJWorks M9 and M9A1 Airsoft pistols but I did get the chance to make a short preview video where I shot both guns at some clay pigeons setup around 20 feet away. I was able to pop the center out of the clay pigeons no problem and found that even without any practice I was consistently hitting dead center on most shots. I am not sure exactly what the FPS will be but considering both theses versions of the KJWorks M9 & M9A1 have the CO2 mags they should shoot up into the 360+ fps range using .20 gram Airsoft BB's. Blowback operation is strong and the slides cycle full length. Keep posted for my upcoming Field Test Shooting Video for both pistols.

Build Quality: As expected, the KJWorks M9 & M9A1 build quality is just like all the other KJWorks Airsoft guns I've tested so far, excellent the fit and finish is the best in my opinion even when compared to my my 4.5mm steel BB shooters. When using these guns regularly, areas that are painted like the metal friction areas show very light wear which is rarely the case with metal built blowback Airguns. Again the tolerances between the moving parts like the slide and frame are very tight showing excellent workmanship and machining from KJWorks.

Realism: Both the KJWorks M9 & M9A1 are copies of the real steel popular Beretta M9 & M9A1, it is really hard to tell them apart from the real versions. Both the M9 and M9A1 are very similar in design with the M9A1 having some slight cosmetic differences, the biggest being the addition of a tactical rail built into the frame. Both KJWorks Beretta's can be field stripped in the same manor as a real Beretta M9 Semi Auto pistol and all parts function the same.

Available in the: Replica Airguns Store

Pros: 

  • Pretty much all metal pistols with good weight to them.
  • Full heavy blowback operation.
  • Excellent fit and finish as always with KJWorks pistols.
  • High capacity full size drop out magazine that holds the Airsoft BB’s and CO2. (Can get Green Gas mags)
  • Seem to be very accuracy and well centered on target.
  • White dot sights make it easy to shoot an most backgrounds.
  • Ambidextrous safeties.
  • Field strip-able like the real steel versions.

Cons:

  • Sight are non-adjustable but elevation can be adjusted using the hop-up.
  • Grips may be a bit wide for some small handed people.
  • CO2 magazines sticks out a bit when using the CO2 mags.

Comments:
The KJWorks Full Metal M9 & M9A1 are yet more examples of excellent full blowback Airsoft pistols from KJWorks. They are built to very high standards, are near perfect replicas of the real steel Beretta M9 & M9A1 and performance is also excellent. Yes the price is slightly higher than a similar Airsoft gun from KWC but the quality on the KJWorks is definitely worth the extra cost. Make sure to drop by our Replica Airguns Canada Store and checkout our new lower pricing on the KJWorks line of Airsoft guns.

My YouTube Table Top  Review of the KJWorks M9and M9A1 Full Metal Blowback Airsoft Pistol:

Buy the KJWorks M9A1 Full Metal Airsoft Pistol in Canada

Buy the KJWorks M9 Full Metal Airsoft Pistol in Canada

Categories: 6mm, Airsoft, Blowback, CO2, Comparison, GBB, Gas, Pistol, Review, Semi Auto, YouTube Video Tags: Beretta, KJWorks, M9, M9A1

KJWorks Full Metal CO2 Airsoft 1911 Table Top Review

2 Comments

Type: Blowback Airsoft Pistol.

Manufacturer:KJWORKS.

Model:1911

Materials: Metal slide & frame.

Weight: 2.2 pounds (980 grams).

Barrel: Metalnon-rifled smooth bore.

Propulsion: 12 gram CO2.

Action: Blowback, Single action only.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 28 rounds.

FPS: 360+ fps.

Trigger Pull: The trigger pull on the KJWorks 1911 is very good since it is modeled after a real steel 1911 which makes it short and crisp with a very light trigger pull. There is a very slight take-up at the very beginning of the pull but once your get past this the release is crisp and perceptible. Since it is not a double action trigger you will need to either rack the slide for your first shot or pull the hammer back if you have already chambered a round.

Accuracy: I have not done my actual Field Test Shooting video review for the KJWorks 1911 Airsoft Pistol but I did get the chance to make a short preview video where I shot some clay pigeons setup around 20 feet away. The KJWorks Full Metal CO2 Airsoft 1911 was a lot of fun to shoot at the clay pigeons and I had no trouble hitting them form that range over and over again. I am not sure exactly what the FPS will be but considering this version of the KJWorks 1911 has the CO2 mag it should shoot up into the 360+ fps range using .20 gram Airsoft BB's. Blowback operation is strong and the slide cycles full length. Keep posted for my upcoming Field Test Shooting Video for the KJWorks Full Metal 1911 CO2 Airsoft Pistol.

Build Quality: As expected, the KJWorks 1911 build quality is just like all the other KJWorks Airsoft guns I've tested so far, excellent the fit and finish is the best in my opinion even when compared to any of my 4.5mm steel BB shooters or 6 mm Airsoft pistols. When using KJWorks guns regularly, areas that are painted like the metal friction areas and high spots show very light wear which is rarely the case with metal built blowback Airguns. Again the tolerances between the moving parts like the slide and frame are extremely tight showing excellent workmanship and machining from KJWorks.

Realism: The KJWorks CO2 Full Metal 1911 Blowback Airsoft Pistol copies the real steel very popular even today Colt 1911 A1, it is really hard to tell the KJWorks Airsoft 1911 apart from the real 45 caliber version. The KJWorks 1911 can be field stripped very similarly to a real 1911 Semi Auto pistol and all parts function virtually the same including a working safety, grip safety, slide catch-release, magazine release and hammer.

Available in the:Replica Airguns Store

Pros:

  • Pretty much all metal pistol with good realistic weight to it.

  • Full cycle heavy blowback operation.

  • Excellent fit and finish as always with KJWorks pistols.

  • High capacity 28 round full size drop out magazine that holds the Airsoft BB’s and CO2. (Can get Green Gas mags)

  • Seems to be accurate and well centered on target.

  • Nice two tone finish.

  • Working grip safety.

  • Nice light true single action only trigger.

  • Field strip-able.

Cons:

  • Sights are non-adjustable but you can adjust elevation using the hop-up.

  • Field strips a little different than a real 1911.

  • CO2 magazine sticks out a bit but KJWorks makes Gas Mags also.

Comments:

I am a big fan of 1911 pistols and love getting my hands on pretty much any version weather it be a Real Steel 45 caliber 1911, a 4.5mm Steel BB version or 6mm Airsoft Pistol. As long as it has that true 1911 single action short light trigger to it. I love the way the slide cycles a bit slower than most semi auto pistols and this can be found in many Airgun and Airsoft version like this KJWorks 1911 making the shooting experience even more realistic. The fit, Finish and overall quality of the KJWorks 1911 over other brands is worth the slight additional costs so if you don't mind paying juts a tad bit more for that extra quality and you're looking for a CO2 1911 then you will not be disappointed with the KJWorks Full Metal CO2 Airsoft 1911.

My Vimeo Table Top  Review of the KJWorks M9and M9A1 Full Metal Blowback Airsoft Pistol:

Categories: 6mm, Airsoft, Blowback, CO2, Comparison, GBB, Gas, Pistol, Review, Semi Auto, YouTube Video Tags: Colt Government 1911, KJWorks, Model 1911

KJWorks CO2 Airsoft Full Metal 1911 - M9 - M9A1 Preview Video

1 Comment

We recently received some new pistols from KJWorks, The CO2 versions in Full Metal of the Colt 1911, the Berretta M9 and the Berretta M9A1. All of these guns are really well made, the fit and finish is excellent. Definitely a very high quality Airsoft pistol and worth spending a little bit more to get this extra quality. We have even lowered the price on many of our new KJWorks guns to make them even more affordable so check them out in our Canada Replica Airguns Store!

So I made a quick demo preview video where I get away from my table top and go outside to show them off a bit and shoot a few rounds through them at some clay pigeons. I did have some camera issues but you will get a good idea on how these guns look and perform.

KJWorks CO2 Airsoft Full Metal 1911

  • Full Metal Design.

  • 2.2 Pounds (980 grams).

  • Adjustable Hop-up.

  • 350-400 fps

  • 28 Round CO2 Magazine

  • Blowback SAO 

KJWorks CO2 Airsoft Full Metal M9

  • Full Metal Design.

  • 2.1 Pounds (950 grams).

  • Adjustable Hop-up.

  • 350-400 fps

  • 24 Round CO2 Magazine

  • Blowback SA & DA

KJWorks CO2 Airsoft Full Metal M9A1

  • Full Metal Design.

  • 2.1 Pounds (950 grams).

  • Adjustable Hop-up.

  • 350-400 fps

  • 24 Round CO2 Magazine

  • Blowback SA & DA

Categories: 6mm, Airsoft, Blowback, CO2, Comparison, Field Test, GBB, Gas, Pistol, Review, Semi Auto, YouTube Video Tags: KJWorks, M9, M9A1, Model 1911

ANT Advanced Novelty Tech CO2 HPA Conversion Kit Shooting Test

1 Comment

Here is my full Field Test Shooting Performance Video Review for the ANT (Advanced Novelty Tech) CO2 HPA Conversion Kit.

Make sure to watch my Table Top Preview for the ANT CO2 HPA Conversion Kit where I talk more about the features and benefits of a Bulk Air system like this and show you exactly what you get in the package.

My main goal in this Shooting Performance Test was to see how the ANT Advanced Novelty Tech CO2 HPAConversion Kit performed side by side with a standard 12 gram CO2. Keep in mind that you can also switch over at any time to a regular 12 gram CO2 even after installing the ANT adaptor system in the gun or magazine.

My choice of Airgun for this test was the KWC - Cybergun Mini UZIConverted to Full Auto. I chose this Blowback 4.5mm CO2 BB Gun because it uses a lot of CO2 with each shot and when shooting in full auto it literally eats CO2. I knew this airguns would really put the ANT Advanced Novelty Tech CO2 HPA Conversion Kit to the test.

My first performance test was to comparing both systems using a Chronograph so I could see how the fps velocity slowed down because of the CO2 cool down effect. The 12 gram CO2 did pretty well emptying a full 25 round magazine but keep in mind I was shooting in semi auto only for the sake of using a Chronograph. I did notice a drop in velocity from a high of over 300 fps to a low of around 260. When I switched over to the Bulk CO2 ANT System and performed the same test the fps started out a bit lower but stayed pretty much about the same with a few ups and downs. The initial lower fps may have been a result of using separate magazines for each test since the valves in each magazine are most likely tuned a bit differently to let out more or less CO2 with each shot.

My second and most impressive test was to empty a full 25 round magazine in full auto mode! Again a started out using the standard 12 gram CO2 and to make this a real world test, I did not replace the 12 gram CO2 form the previous test. I figured 50 shots was a realist amount of shots to get from a single 12 gram CO2 and after all I was only shooting in semi auto which uses a lot less CO2 then shooting in full auto.

My KWC Blowback Mini UZI rocked pretty good using the 12 gram CO2 until it hit about a third the way through the magazine and then it stated to slow down and pretty much stop dead in its tracks with about 5-6 rounds still left in the magazine. The CO2 was all gone and I was left a bit unsatisfied :(

Without any significant break time to let my KWC Mini UZI warm up again, I switched over to the ANT Advanced Novelty Tech CO2 HPA Conversion Kit magazine and unloaded the full magazine in no time with no cycle rate slow down at all, even after the magazine was deprived of Steel BB's I kept squeezing the trigger and letting the blowback hammer my shoulder for several more satisfying bursts. Now that is what you expect from a full auto Blowback BB Machine gun!

In conclusion, when shooting in semi auto you will see better fps consistency using the ANT Advanced Novelty Tech CO2 HPA Conversion Kit but where this system really shines at least for me is I can shoot as fast as as long as I want and it will feel same as the very first shoot I take even when using a full auto system. No more switching out 12 gram CO2 every few magazines, just speed load some more BB's in and your good to go.

Categories: .22 cal, 4.5mm / .177 cal, 6mm, Airsoft, BB, Blowback, Bulk Air, CO2, Field Test, Full Auto, GBB, Gas, Pellet, Pistol, Review, Rifle, Semi Auto, YouTube Video Tags: ANT, Advanced Novelty Tech