In this Field Test Shooting Video I test out the KJWorks CZ P-09 GBB Airsoft Pistol in the Replica Airguns Indoor Sea Can Shooting Range to find out what the velocity and accuracy is using .20 gram Airsoft BB’s. If you’re more interested in details, specifications and close up video of the KJWorks CZ P-09 GBB Airsoft Pistol then make sure to watch my Table Top Video for that information.
Starting with the velocity test I averaged out 6 rounds using my chronograph to find out the fps velocity for the KJWorks CZ P-09 GBB Airsoft Pistol and I was able to get 279.5 fps, the slowest of the 6 shots was 279 with the fastest being 281 so actually fairly closer to each other. I do mention at the end of the video that it felt like the velocity was not consistent because the blowback action to me felt like it was heavier on some shots than others? I felt like this might effect accuracy in terms of elevations if the velocity was not consistent but it ended up not being a factor as far as I could tell.
For my accuracy test I loaded 10 rounds in the KJWorks CZ P-09 GBB Airsoft Pistol and proceeded to place them to the best of my ability into my paper target setup 30 feet down range using a rested and seated shooting position (Sand bag up front, seated on a stool in the back). Even though the grouping spread out to about 4 inches, all but one round stayed within about 2 inches and side to side the spread was closer to about 1.5 inches for all shots. In terms of placement on the target they where all fairly well centered out of the box.
The fps for the KJWorks CZ P-09 GBB Airsoft Pistol is a bit low using the preinstalled short internal barrel that does not allow for the added threaded barrel extension but you could install the short internal threaded barrel and add the external barrel extension to increase the fps to more in the range of 360+. That said you would have a fairly long brass inner barrel protruding from your gun with no way I can see to install a mock suppressor to hide it so it would not look so good this way and there is also the possibility of damaging the thin exposed external barrel. Overall the KJWorks CZ P-09 GBB Airsoft Pistol performed well but I feel needs a little bit of break in time to smooth out the blowback consistency but even as is it shot consistent fps and was able to get most rounds well placed on the center of the target.
Type: Gas Blowback Airsoft Pistol. Manufacturer: KJWorks Model: CZ P-09 Materials: Metal & Polymer. Weight: 2.3 pounds (1050 grams). Length: 9 inches (229mm) total. Barrel: 4.4 inches (120mm),Metal non-rifled smooth bore. (Comes with barrel extension) Propulsion: Green gas or propane. Action: Blowback, single and double action. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 25rounds. FPS: 376 fps.
Trigger Pull: The trigger pull on the KJWorks CZ P-09 GBB Airsoft Pistol is good in both single and double action shooting modes. Most of the time you will be shooting in single action as the blowback action will do all the work cycling the slide and retracting the hammer allowing for light quick single action follow up shots. If you do decide to drop the hammer in-between shooting you can then pull the double action trigger which is much longer and a bit heavier but this will draw the hammer back and release the trigger as expected with single action shots to follow.
Accuracy: So far I have not made my Field Test Shooting Video for the KJWorks CZ P-09 GBB Airsoft Pistol but do expect it to behave much like the ASG distributed version of this same gun which by the way is also made by KJWorks. The only real difference to consider will be the gas used in both of these Airsoft guns as the ASG distributed version uses CO2 while the KJWorks version reviewed in this video uses Green Gas or Propane which will reduce the velocity a little bit. We will find out next week when I make my Field Test Shooting Video for the KJWorks CZ P-09 GBB Airsoft Pistol.
Build Quality: KJWorks is know for making high quality products and the KJWorks CZ P-09 GBB Airsoft Pistol is no different. Fit and finish is excellent and the quality of material is also very good with similar materials used as you would expect them compared to the real steel version with the exception of the metals not having to be as high grade because of way less force and pressure on the Airsoft version.
Realism: The KJWorks CZ P-09 GBB Airsoft Pistol is a one to one Replica of the real steel CZ P-09 firearm and on first inspection would be hard to tell apart. You are going to find CZ licensing throughout this Airsoft Pistol in all the right places and all the controls work just like the powder burning CZ P-09. The full blowback operation, reassessed barrel and ability to field strip it also aid in making the shooting experience super realistic.
Pros:
Build quality feels really goods, lots of weight to this Airsoft Pistol.
Full length blowback action.
Accurate licensed CZ P-09 Replica.
Trigger pull is nice in both single and double action.
Picatinny rail for adding accessories like a tac light or laser.
Double stack full size drop out Metal Magazine holds the Green Gas and 25 Airsoft BB’s
No orange tip which is always nice.
Easy to see white dot front and back sights.
Green Gas which when using propane is fairly cheap to shoot.
Easily Field Strippable.
Adjustable Hop-up.
Cons:
Sights don’t seem to be adjustable.
Controls are not fully ambidextrous.
Green Gas version has less velocity than CO2 version.
Comments:
The KJWorks CZ P-09 GBB Airsoft Pistol is really almost exactly like the ASG Distributed version since both are made by KJWorks at the end of the day. There are some slight differences between them like CO2 versus Green Gas and some other very minimal cosmetic changes. I would say go with which ever version is in stock and perhaps is less expensive at the time. You really can’t go wrong as this is a great choice to make for an Airsoft Side arm to use on the Airsoft field or for plinking in your yard or indoor range.
My Table Top Review Video of the KJWorks CZ P-09 GBB Airsoft Pistol:
Type: Gas Blowback Airsoft Pistol. Manufacturer: G&G Model: Piranha SL Materials: Metal & Polymer. Weight: 1.85 pounds (838 grams). Length: 10.3 inches (262mm) total. Barrel: 5.6 inches (142.5mm),Metal non-rifled smooth bore. Propulsion: Green gas or propane. Action: Blowback, single action only. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 20/25rounds. FPS: 370+ fps.
Trigger Pull: The trigger pull on the G&G Piranha SL GBB Airsoft Pistol is typical single action only with a super easy short take up (some of which is the trigger safety engaging), followed by a crisp predictable light release. The quick slide cycle allows for some quick semi auto shooting with the G&G Piranha SL GBB Airsoft Pistol making it a great fast action shooter with quick target acquisition.
Accuracy: I have not done my actual Field Test Shooting video review for the G&G Piranha SL GBB Airsoft Pistol but I expect it to perform similar to the G&G Piranha MK I and TR GBB Airsoft Pistol I made a Field Test Shooting Video for earlier and shoot consistently in the mid to high 300 fps with a 10 round grouping around 1-2 inches. Stay posted for my Field Test Shooting Video where I will confirm these predictions…
Build Quality: Like pretty much all G&G Airsoft guns including the Piranha series, the G&G Piranha SL GBB Airsoft Pistol build quality is really good. Fit and finish are excellent with virtually zero slide wiggle, I like the two tone stainless slide and chrome finish barrel version but the all black looks really good too. As with the entire Piranha line, the SL also has an updated Ceramic Whirl Cylinder Valve technology from G&G that should significantly help with freezing in colder or fast shooting situations along with a new Hop-up system you can easily adjust without taking the Airsoft gun apart by using the bullet shaped tool.
Realism: The G&G Piranha SL GBB Airsoft Pistol as far as I can determines not an exact replica of any specific real steel gun in production but it does share its looks and feel to that of the Glock but perhaps with an even more modernized look to it. Of course the SL version is elongates. You will find realistic function to the G&G Piranha SL GBB Airsoft Pistoling terms of it’s operation with its full blowback action, working slide catch release, magazine release trigger safety and takedown lever allowing for it to be field stripped easily.
Pros:
Good balance of metal and plastic for a balanced and light feel.
Partial slide Blowback operation should allow for even better gas performance and snappy operation.
Fiber optic sights front and back for easy target acquisition.
Has a working trigger safety.
Smaller grips perfect for people with smaller hands. Larger hands work just fine too!
Comes in a well presented soft foam form fitted box case.
New Hop-up system for quick and easy fine adjustments with no need to field strip the gun.
Long bottom rail for adding accessories.
Comes in all black and two tone black and sliver.
Comes with two magazines (20 round short and 25 round extended with fake bullets)
Comes with high quality speed loader.
Threaded barrel tip for add on mock suppressor if you want to.
Cons:
Sights are non adjustable.
Not an actual replica of any specific gun I know of but does share some Glock attributes.
Wish the extended mag held more rounds?
I like the hard shell case better that comes with the other Piranha versions.
Comments:
The G&G Piranha SL GBB Airsoft Pistol is for sure the flashiest version of the Piranha series of G&G Airsoft Pistols with its extended barrel and extended magazine with the fake bullets. I also imagine the extra barrel length will add some addition fps to the velocity and we will find out when I make my Field Test Shooting Video for it shortly. I am hoping the extended magazine holds more than an addition 5 rounds but again we are going to find out in my my Field Test Video so be sure to watch that one! If you don’t mind the additional bulk of the G&G Piranha SL GBB Airsoft Pistol over the MK 1 and TR than you will get an extra magazine and I a bit higher velocity.
My Table Top Review Video of the G&G Piranha SL GBB Airsoft Pistol:
In this Field Test Shooting Video I test out the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol in the Indoor Replica Airguns Sea Can Shooting Range to find out what the real world velocity and accuracy is for it. I start off by putting 5 rounds through my Chronograph and average the fps, I then I setup a fresh paper target 30 feet down range and put (max amount in the magazine) 8 Paintball rounds into it to see how close of a grouping I can get. If you want more details and specifications on the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol then checkout my Table Top Video for that information.
Starting with the Chronograph velocity test Umarex says you can expect around 350 - 400 fps which seems rather high to me based on my other Field Tests with similar .43 caliber Paintball Pistols. Perhaps this is using actual Paintballs whereas I was using rubber balls for my testing to reduce the mess in the Sea Can. I was able to average 300 fps using a brand new CO2 in what I would consider to be about a room temperature conditions which means in warmer situations I am sure we can get even higher than the 300 fps I hit on this day.
For the next portion of the Indoor Field Test I loaded 8 rounds into the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol and carefully placed them into a paper target 30 feet down range. I was using my standard seated position in the back with my hands resting on a sand bag up front which I have found to be fairly stable but there will still be some human factor which can effect overall accuracy. My results where about what I was expecting with a Paintball Pistol shooting Rubber Balls, generally they will spread out a bit at 30 feet and in this Field Test my 8 shot group spread out to about 8 inches or so. They did seem to be well centered on the target as a group and if I was shooting at a human sized torso at that distance I would have hit it every time.
The Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is another nice addition to the Umarex / T4E lineup up .43 Caliber Replica Paintball Pistols and if you are a Glock owner and want a Paintball Pistol to train with, then the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is about as good as you can get, the only other option would be to go with an Umarex Glock Airsoft or BB Pistol but at least we now have a bunch of options depending on your specific needs!
In this Field Test Shooting Video I test out the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol in the Indoor Airgun Sea Can Shooting Range to find out what the real world velocity and accuracy is for it. I first put 5 rounds through my Chronograph and average out the fps and then I setup a fresh paper target 30 feet down range and put 10 rounds into it to see how close of a grouping I can get. If you want more details and specifications on the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol then checkout my Table Top Video for that information.
Starting off with the Chronograph velocity test Sig says you can expect around 300 fps. I was able to average 286 fps using a brand new CO2 in what I would consider to be about a room temperature which means in warmer conditions I am sure we can get the claimed 300 fps made by Sig Sauer. I have been able to get higher velocities with other KWC 1911’s so perhaps with slightly lower fps for the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol we may get more shots per CO2?
Next I loaded 10 rounds into the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol and carefully placed them into a paper target 30 feet down range. I was using a seated position in the back with my hands resting on a sand bag up front which is fairly stable but there will still be some human factor which can effect overall accuracy a bit. My results where decent with about a 2 inch grouping that included 6 rounds right in the bullseye so out of the box the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol sights where good to go.
The Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol is another nice addition to the KWC built 1911 lineup and I do like the Sig Sauer/KWC customization of this version, maybe one of my favorite KWC 1911’s out there? You can expect around 300 fps and nice 2 inch grouping at 30 feet which will make this a perfect action plinker for shooting pop cans or targets at close to medium ranges.
Type:Paintball Gun. Manufacturer:Umarex - T4E. Model:Glock 17 Gen5 Materials: Metal & Polymer. Weight: 726 grams (1.6 pounds). Barrel: Smooth bore. Power Source: 1x12 gram CO2. Action: Semi-Automatic with blowback action. Ammo Type: .43 Caliber Paintball or Rubber Ball. Ammo Capacity: 8 Rounds. FPS: 350-400.
Trigger Pull: The trigger pull on Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol feels a lot like a double action trigger mainly because when you pull the trigger the inner barrel travels backwards into the magazine placing a paintball round in the barrel which seals the barrel with the magazine so less CO2 is wasted. This does make the trigger a little bit longer and heavier than a single action trigger. The internal hammer/striker is engaged from the blowback action reducing the friction on the trigger. In terms of it being similar to a Glock trigger pull it will be a bit heavier and longer but not bad overall.
Accuracy: So far I have not had the opportunity to test the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol out so stay posted for my future Field Test Shooting Video where I will see what kind of velocity and accuracy we can expect from it. For now you can watch my Field Test Shooting Video for the Umarex T4E Walther PPQ M2 .43 Caliber Paintball Pistol as it is very similar in design and should for the most part perform about the same.
Build Quality: The build quality of the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is really very good, metal parts are where you would expect them, the slide, slide catch, barrel, magazine and most internal parts giving the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol a solid 1.6 pound overall weight with the magazine in. The fit and finish is also very good with virtually no slide wiggle to be found.
Realism: The Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is a licensed Glock Replica via Umarex which owns the licensing so you will find Glock licensing and branding throughout this Paintball Pistol. Just looking at the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol you would find it hard to tell the difference between it and the real steel Glock 17 Gen5 but there are some notable differences as in the length of the slide travel which is about half of what you would expect from a real Glock. This is to account for the obvious internal differences to allow for CO2 and paintballs to be used. Overall the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol would make a great training pistol if you are a Glock owner and want to use the closest gun to it.
Pros:
Really great weight and solid feeling gun.
Full Metal slide that locks back on the last shot.
All metal heavy full size drop out magazine adds some additional weight to the gun.
Good for Glock shooters looking for a training weapon.
Everything works pretty much like the real gun so again great as a training tool.
Easy to see white dot sights front and back.
Working trigger safety.
Fit and finish is excellent.
Magazine spring release really shoots the magazine out so be warned!
.43 caliber barrel opening, adds to realism.
Fully Glock licensed via Umarex.
Comes in a ice hard shell case.
Cons:
Trigger is a bit heavy, not as light as a real Glock, more of a double action trigger in function.
Magazine only holds 8 rounds, so you are going to need extra magazines for sure.
Blowback action is not full blowback, more like a typical half blowback BB gun.
Comments:
The Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is another great addition to the Replica Paintball Pistol options out there and if you are a Glock owner looking for a training gun you can use for some additional trigger time outside of a gun range or want to perform realistic training exercises with live players then the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol will fill this need. I am looking forward to testing it out when I make My Field Test Shooting Video as Umarex claims it to have significantly higher fps (350-400) then some of the other replica T4E Paintball guns I have reviewed so far. I guess we will see soon!
Type:BB Pistol. Manufacturer: Sig Sauer Model:1911 Emperor Scorpion. Materials: Mostly all metal build. Weight: 2.1 pounds (953 Grams). Barrel: 4.3 inches (109.2mm) - Non-rifled. Propulsion: 12 gram CO2. Action: Blowback single action only. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 16 round full size drop out metal magazine. Max FPS: 300+.
Trigger Pull: The Single action only trigger pull on the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol is typical of what you will find on a KWC Blowback 1911, and that’s a good thing since it is short light and crisp similar to a real 1911 semi auto pistol.
Accuracy: I haven’t done my official field test shooting video so I can not comment exactly on how well this version of the KWC 1911 series will perform, but since I havre reviewed many similar versions of the KWC 1911, it should shoot similarly. That said I hope to expect a velocity around 300-330 fps and a 10 shot grouping between 1.5 and 2.5 inches.
Build Quality: The Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol like the other KWC 1911 Blowback BB Pistols has in a sense been perfected over time as the Original Tanfoglio Witness 1911 I Review came out over a decade ago and although it did have a few problems at first with the safety it all got worked out in the end and versions today are well made and reliable. As with all Airguns the metals used are not firearms grade quality so you do need to be a bit more careful with them but if you do you will get years of use out of them.
Realism: The Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol is a lsenced replica of the real steel Sig Sauer 1911 Emperor Scorpion 45 ACP and from looking at photos on line or the Sig Sauer 45 APC version it is virtually identical in a appearance other than the hammer which on the 45 ACP version seems to have a larger and more oval skeletonized opening. That’s pretty minor in the scheme of things. As this is a full blowback Air Pistol, the mechanical functions mimic the real steal version very well and as expected you can even fully field strip this BB Pistol.
Pros:
Based on the tried and true KWC 1911. Most parts should be mix and match.
Full blowback operation.
Excellent SAO 1911 trigger as expected.
Full metal construction, has great realistic weight to it.
Easy to see white dot sights front and back.
Tactical with ambidextrous safety controls.
Rail for adding on accessories like a laser or Tac light.
Nice reassessed barrel ads to the realism.
Love the two tone color scheme.
Full Sig Sauer licensing.
Looks virtually identical to the real steel Sig Sauer 1911 Emperor Scorpion..
Cons:
Will go through CO2 fairly quickly.
Lower fps because of full blowback operation.
Sights are none adjustable.
Comments: Every time a new Blowback 1911 Airgun comes out I seem to say this one is my new favorite and well here we go again… Not only do I like 1911’s I also really like Sigs. I also seem to be a fan of town tone guns as it makes the parts on the gun really stand out in contrast to each other and I like that look. So when you put all of these things together it makes for a real winner in my books. With so many Blowback 1911 choices out there it is hard to make up ones mind, I would consider the Sig Sauer 1911 Emperor Scorpion Blowback CO2 BB Pistol to be in the top 3 for sure!
In this Field Test Shooting Video I perform two main test in the Replica Airguns Sea Can using the KJWorks KP-16 GBB Airsoft Pistol. First a chronograph test to see what the real world velocity is and then I perform an accuracy test to see how accurate the KJWorks KP-16 GBB Airsoft Pistol is at 30 feet from the target. If you’re interested more in specifications and details along with close up video of the KJWorks KP-16 GBB Airsoft Pistol then check out my Table Top Video Review for it where I show you around and do a field strip on camera.
Starting off with my chronograph velocity test. I decided to find out what the differences would be using the included internal short barrel and the extended external barrel since the KJWorks KP-16 GBB Airsoft Pistol does come with both in the box to allow for higher fps and easier import into Canada. The KJWorks KP-16 GBB Airsoft Pistol is rated for 360+ fps using the extended longer barrel so I used that one first to establish a baseline and was able to achieve a 394 fps 4 shot average. Switching up to the shorter internal barrel without the extension, the velocity was reduces as expected and I got an average 3 shoot velocity of 301 fps. So I can safely say that the barrel extension added an additional 90+ fps to the velocity in this case!
Next I placed a brand new paper target 30 feet down range and shot ten 20 gram Airsoft BB’s into it using a seated shooting position with my hands resting on a sand bag up front, this allows for a fairly stable platform to shoot from but is not without some human error to factor in. I also decided to use the barrel extension for this test as the threading on the end of the internal barrel can disrupt airflow causing air turbulence a bit and effect accuracy. I was able to get around a 2 inch grouping with my 10 rounds. The KP-16 GBB Airsoft Pistol shot a bit low and to the left out fo the box, adjusting the hop-up should correct the elevation but in terms of windage there is not sight adjustment other than perhaps playing around with the front removable sight and trying to movie it a bit to the left so as to make it shoot more to the right.
My take on the KJWorks KP-16 GBB Airsoft Pistol is it is a solid Airsoft Shooter with great modern 1911 tactical looks. The white dot sights make it a lot easier for my older eyes to line up on the target which makes this more practical for me. I also like the higher capacity magazine which again makes this a decent side arm for Airsoft wars. If you like the look of the 1911 but want it in a bit more of a modern configuration then the KJWorks KP-16 GBB Airsoft Pistol may just be the way to go!
In this Field Test Shooting Video I perform two main test using the WE 1911 GBB Airsoft Pistol. A chronograph test to see what the real world velocity is and then I perform an accuracy test to see how accurate the WE 1911 GBB Airsoft Pistol is at 30 feet away. If you are interested more in specifications and details along with close up video of the WE 1911 GBB Airsoft Pistol then check out my Table Top Video Review for it where I even do a field strip on camera.
Starting off with my chronograph velocity test. I decided to find out what the differences would be using the internal short barrel and the extended external barrel since the WE 1911 GBB Airsoft Pistol does come with both to allow for higher fps and easier import into Canada. The WE 1911 GBB Airsoft Pistol is rated for 360+ fps using the extended longer barrel so I started with that one first and was able to achieve a 383 fps 4 shot average. Switching to the shorter internal only barrel the velocity was reduces as expected and I got an average 3 shoot velocity of 300 fps. So it is safe to say that the barrel extension added an additional 80+ fps to the velocity!
Next I placed a fresh paper target 30 feet down range and shot 10 rounds into it using a seated shooting position with my hands resting on a sand bag up front, this allows for a fairly stable platform to shoot from but is not without some human factor. I also decided to use the barrel extension for this test as the threading on the end of the internal barrel can disrupt airflow causing turbulence a bit and effect accuracy. I was able to get around a 2.5 inch grouping with my 10 rounds. The WE 1911 GBB Airsoft Pistol shot fairly well on the bullseye up and down with the out of the box hop-up setting but it did shoot just slightly to the left. Since there are no sight adjustments you will have to factor this into your aim point when shooting out at farther ranges, but at around 30 feet you should not have much problem shooting a human sized target or even a pop can.
All in all the WE 1911 GBB Airsoft Pistol perfumed as expected with consistent fps and a nice 10 shot grouping on my paper target. I did find the sights a bit hard to see as my eyes are not what they use to be so black sighted pistols with whit dot sights make it a lot easier for me to line up my target. People with younger eyes will most likely not have this problem but for us a bit older guys, keep this in mind. If you’re looking for a classic 1911 A1 that performs well and looks really nice then the WE 1911 GBB Airsoft Pistol may be just the perfect fit for you!
In this Update Preview Unboxing Video I take a look at 4 newer products that just came across my table and are in our Replica Airguns Online Stores. One is a CO2 Blowback BB Pistol, one is a CO2 .43 Caliber Paintball Pistol and two are GBB Airsoft Pistols, so a rather nice selection for us to take a look at here! I will be following up this Update Preview Unboxing Video with proper Table Top and Field Test Shooting Video to find out all the details and how well they perform.
Type: GBB Airsoft Pistol. Manufacturer: KJWorks Model:KP-16 Materials: Mostly all metal build. Weight: 2.16 pounds (980 grams). Barrel: 4.5 inches, non-rifled. Length: 9.75 inches. Propulsion: Green Gas / Propane (Can also accept a CO2 Magazine) Action: Semi Auto, single action only trigger. Ammunition Type: 6mm Plastic Airsoft BB's. Ammunition Capacity: 26 round full size dropout metal magazine. FPS: 366+ with extended barrel.
Trigger Pull: The trigger pull on the KJWorks KP-16 GBB Airsoft Pistol is exactly what your would expect from a 1911 pistol which is always a good thing as 1911’s are generally short and light which makes fast action shooting super fun and easy! There is virtually no take-up in the trigger, and then a predictable nice and light release. Trigger reset is almost non existent like most 1911’s.
Accuracy: I have not yet made my Field Test Shooting Video for the KJWorks KP-16 GBB Airsoft Pistol but plan to next week so stay posted for that video. I will be testing out both the included extended barrel and internal short barrels to see what the velocity difference will be and then when it comes to accuracy I will test out the KJWorks KP-16 GBB Airsoft Pistol using the extended barrel to exclude the threading on the short barrel interfering with airflow and accuracy.
Build Quality: The KJWorks KP-16 GBB Airsoft Pistol is a really great looking pistol with its tan with black/dark accent finish. You will find it has that KJWorks solid build quality, it is virtually all metal even including the chunky grips being metal. Fit and finish is excellent, I’m not sure if there is a better made Airsoft 1911 out there?
Realism: As is with most Full Blowback Airsoft Pistols they are built to look and act the part of their real steel counterparts and the KJWorks KP-16 GBB Airsoft Pistol checks off all the boxes here! All mechanical parts work just like the real steel version and you can easily field strip the KJWorks KP-16 GBB Airsoft Pistol to swap out the internal barrel and adjust the hop-up. I like the fact that If you are not a fan of the compensator extension then you will be happy to know that KJWorks also includes a standard barrel bushing you can replace it with to shorten up the gun and make it look more traditional to a 1911.
Pros:
Full metal gun with good weight to it.
Heavy Full blowback operation.
Excellent fit and finish as always with KJWorks pistols.
High capacity full size drop out magazine that holds 26 rounds.
Versatile magazine options, also works with CO2 magazines.
Easy to see white dot sights front and back.
All working components like the real steel 1911.
Vented extended barrel compensator looks great but can be removed easily.
Comes with extended barrel for higher velocity and easier import into Canada.
Field strip-able.
Cons:
Sights are not adjustable.
Real steel grips will not fit without some modifications.
Comments: In terms of Tactical 1911’s, I would saye the KJWorks KP-16 GBB Airsoft Pistol is one of my favorites out there. I really like the tan with dark highlights and the way KJWorks decided to match up the metal grips with the compensator with what I would call a dark chrome look to them. The KJWorks KP-16 GBB Airsoft Pistol really does look like it is right out of a video game or movie but if you want to dress it down a bit you can also remove the compensator to make it look more like most other Tactical 1911’s. I guess all that’s need to do now is test the KJWorks KP-16 GBB Airsoft Pistol out in the Replica Airguns Sea Can Range and see how well it performs!
My Table Top Video of the KJWorks KP-16 GBB Airsoft Pistol:
Type: GBB Airsoft Pistol. Manufacturer: WE Airsoft Model:1911 A1 Materials: Mostly all metal build. Weight: 1.7 pounds (760 grams). Barrel: 4.5 inches, non-rifled. Length: 8.5 inches. Propulsion: Green Gas / Propane Action: Semi Auto, single action only trigger. Ammunition Type: 6mm Plastic Airsoft BB's. Ammunition Capacity: 15+1 round full size dropout metal magazine. FPS: 366+ with extended barrel.
Trigger Pull: The trigger pull on the WE 1911 GBB Airsoft Pistol is about what your would expect from a 1911 type pistol which is a good thing since they are generally short and light which makes for easy fast action shooting! There is just a bit of slack in the trigger, perhaps less than a millimeter with a predictable light release. Trigger reset is almost non existent.
Accuracy: I have not yet made my Field Test Shooting Video for the WE 1911 GBB Airsoft Pistol but plan to next week so stay posted for it. I will be testing out both the extended barrel and internal short barrel to see what the velocity difference will be and then when it comes to accuracy I will test out the WE 1911 GBB Airsoft Pistol using the extended barrel to exclude the threading on the short barrel interfering with accuracy.
Build Quality: The WE 1911 GBB Airsoft Pistol is a really gorgeous looking pistol in the stainless finish. You will find it has an overall solid build quality, it is virtually all metal with only the grips and some internal parts like the gas chamber and nozzle being plastic. There is almost zero slide wiggle and all the mechanical parts work and engage nicely. The only thing I noticed was that the ejection port near the front could have been finished a little bit better as there seemed to be some slight ridges in the metal there.
Realism: As is with most Full Blowback Airsoft Pistols they are built to look and act the part of their real steel counterparts and the WE 1911 GBB Airsoft Pistol is again no exception! All mechanical parts work as intended and you can easily field strip the WE 1911 GBB Airsoft Pistol to swap out the internal barrel and adjust the hop-up. I like the fact that WE Airsoft color matched the magazine rather than simply shipping it with the black magazine as I have found some other companies do.
Pros:
All metal pistol with decent weight to it.
Crisp Firm full blowback operation.
Very good fit and finish.
No marking on the metal parts at all, some may like this.
Color matched stainless magazine.
Gun will accept real 1911 grips 99% sure of this :)
All controls work just like there real steel version, safety, slide catch release, safety and grip safety.
Should have good fps with barrel extension, enough for import into Canada.
Very believable working replica of the real steel Colt 1911 A1 Pistol.
Fully field strip-able.
Comes with extension barrel and replaceable inner barrel if not going to use extension.
Cons:
No markings or licensing on the gun if that is important to you?
Perhaps a bit lighter than a real steel 1911 at 1.7 pounds.
Magazine only holds 15 rounds but the real steel 1911 only held 7 rounds.
Comments: As I have mentioned in many of my other videos, I am a huge 1911 fan and even go so far as to prefer the standard Government issue over all others as it is the most basic and closest to its original version. There are a ton of BB and Airsoft Blowback 1911’s available now so it is really hard to pick which one to get understandably. If you are a WE fan then this choice should be fairly easy, if you are not sure about WE then all I can say is this is one of the nicer 1911 A1’s and if you want a lighter weight gun over a heavier gun then that may also play a roll in your buying decision. I can’t comment just yet on performance but I will know shortly so stay posted. If it performs well then there is no reason not pick yourself up on of these WE 1911 GBB Airsoft Pistols!
My Table Top Video of the WE 1911 GBB Airsoft Pistol:
In this Field Test Shooting Video I give the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol my usual run though and test it out using my Chronograph to see what the average 5 shot Velocity is using .20 gram plastic Airsoft BB’s. I then placed 10 rounds at a paper target setup 30 feet down range using a seated shooting position with my hands rested on a sand bag up front for stability. If you want information on specifications and details along with some close up video of the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistolthen watch my Table Top Video for it here.
Starting off with my Chronograph test, the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol was able to get a 6 shot average of 351 fps with the fasters round hitting 359 fps and the slowest Airsoft BB recording 346 fps. The indoor temperature was around 20 degrees Celsius which is close to 70 degree Fahrenheit for reference so with warmer temperatures I would expect velocities up to the claimed 360+ fps.
Moving on to the accuracy portion of my Field Test Test for the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol, I slowly and carefully placed 10 rounds into my fresh paper target and was able to get a nice 2 inch group perhaps even verging on 1.5 inches if I remove one outlier. I was shooting rather low at first so I raised my aim point up a bit, since the sights are not adjustable you might want to adjust your hopup a bit to spin/arc the Airsoft BB up just a bit.
Overall the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol is an awesome Airsoft gun to shoot, it really has a lot of blowback action you can feel in your hands probably because of its large overall size, you will need some sizable hands to shoot this Airsoft Pistol as the grips are large and wide just like the real steel version. Performance wise the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol performed as expected and maybe even better than I expected hitting really close to the claimed fps and shooting a nice tight 10 shot grouping for me. If you are a Desert Eagle fan and like the gold bling then this may just be the product for you.
In this Field Test Shooting Review I test out the Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver in the Replica Airguns Sea Can Indoor Shooting Range to find out its velocity and accuracy using both 4.5mm Steel BB’s and .177 Caliber Lead Pellets. The version I am using is the BB version but my viewers have informed me that the BB version may in fact shoot just as well as the pellet version using pellets even without the rifled barrel due to how pellets are shaped not always requiring a rifled barrel to fly true. So let’s find out!
Starting with the velocity test, I shot 4 rounds of each ammo through my Chronograph using a fresh CO2 cartridge. Umarex claims the Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver is able to get a maximum fps of 420 using standard 4.5mm steel BB’s and I was able to average 396 so every close. In warmer conditions 420 fps should be possible. Switching to the .177 caliber lead pellets the fps lowered a bit to an average of 323 fps as expected since the pellets are much heavier (around 7 grain versus 5 grain). I would expect the energy of the pellets to be a bit higher and also keep that energy out to further ranges so if you plan to shoot longer ranges perhaps go with the lead pellets over the BB’s as long as they are similar in accuracy which I test next.
For the accuracy portion of the test I again started off with the 4.5mm Steel BB’s and fired 6 rounds into my paper target setup 30 feet down range. I shot the Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver using a seated shooting position with my hands resting up front on a sand bag to help with stability but it’s not perfect and there is always some human factor to consider. That said I was able to shoot a 1.5 inch 6 shot grouping with the BB’s and if I remove one outlier from the group that reduced it to closer to around an inch so not too bad for a BB shooter. I then switching up to the .177 caliber lead pellets and was a bit surprised that even without a rifled barrel the pellets seemed to perform better than the Steel BB’s getting a solid 1 inch grouping with no real outliers in it!
Unfortunately I do not have the actual rifled barrel version of the Umarex S&W M29 8 Inch Barrel Shell Loading CO2 Revolver. Perhaps in the future I can compare the BB verso to the Pellet version using pellets to see if there is an improvement with the addition of the rifled barrel. I can say the BB version without the rifled version shoots pellets just fine at least up to 30 feet so feel free to shoot whatever ammo you want to with it and not be worried about compromising accuracy or velocity.
Trigger Pull: The trigger pull on the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol is single action only which means you will need to rack the slide to not only draw the hammer back but to also chamber the first round. After that the blowback action will do this for you until you are out of ammo and then the slide will lock back. The trigger itself is really nice, it’s light, short and has a crisp release perfect for fast action shooting.
Accuracy: At this point I have not made my Field Test Shooting portion of my review for the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol and I really don’t know what to expect? Cybergun claims an fps of 368 using green gas or propane but this may be on the high side since green gas generally produces less velocity than CO2. In terms of accuracy, again I have no idea since I have not reviewed this version of Desert Eagle before. So stay posted till next week when I make the Field Test Shooting Review for it.
Build Quality: Overall the all metal build quality of the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol is good which I would hope to be the case for a higher priced Airsoft Pistol like this. I did however notice under the slide there was a bit of a rough area that I feel could have been sanded or polished out a bit better. Other than that this gun looks amazing and the fact that both the slide and receiver are both metal gives this Airsoft gun good weight and feel.
Realism: The Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol is an excellent Replica Airsoft version of the real steel L6 .50AE Desert Eagle including the top and bottom rails and the ported front barrel. It also has full blowback action and you can fully field strip it. Combine that with an all metal build and it doesn't get any more realistic than that.
Pros:
Full metal build, close to true weight of real steel version.
Nice gold or silver Electroplated finish.
Realistic full blowback action.
Fully Licensed via Cybergun.
Rails on top and bottom for adding accessories.
Nice light and short single action trigger.
Injection molded polymer grip panels with Desert Eagle markings.
Realistic field strippable.
Full size drop out metal magazine.
Adjustable Hop-up to adjust elevation and accuracy at range.
Cons:
Comes with red/orange tip installed.
Price is on the higher side.
This version is not full auto.
Comments: Going off just the looks and feel for the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol I can say it is for sure one of the nicest Desert Eagles I have reviewed to date. I’m not generally a fan of gold guns but I think gold really suits the Desert Eagle since this iconic pistol is known for being over the top. It’s also full metal as compared to the KWC versions so that’s a big plus. I guess it will come down to how well it performs during my Field Test Shooting Video in terms of power and accuracy. If it doesn't let me down here, it may just be worth the nearly $400 piece tag!
My Table Top Video of the Cybergun Licensed L6 .50AE Desert Eagle GBB Airsoft Pistol:
Type: BB Pistol. Manufacturer: Umarex. Model: M29. Materials: Metal & plastic. Weight: 2.5 pounds (1135 grams). Barrel Length: 8.375 inches (Smooth bore). Total Length: 12.13 inches. Propulsion: 12 gram CO2 cartridge. Action: Revolver, single and double action. Ammunition Type: 4.5mm steel BB's (Also available in 6mm Airsoft). Ammunition Capacity: 6 rounds. FPS: 420fps claimed.
Trigger Pull: The trigger pull on the Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver is light in single action but not too light, there is virtually no take up and the release is predictable. In double action the trigger pull is heavier as the cylinder and hammer are both actuated manually by the trigger but even so the pull is not what I would call heavy for a double action revolver. The double action trigger pull is nice and even and will not tire out your finger too much firing all six rounds quickly.
Accuracy: At this point i have not made my Field Test Shooting portion of my review for the Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver but I expect to get close to the 420 fps claimed velocity and I also expect to shoot around a 1 to 2 inch grouping based on my past experienced with similar Shell Loading BB Revolvers. I may even pull of a 1/5 inch group if I am on my game and so is the gun… We will have to all wait till next week when I record the shooting portion of my review for the Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver.
Build Quality: Overall the all metal build quality of the Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver is very good. The black chrome finish looks really nice but does show every finger print and any grease from your hands. The imitation wood grips look just like real wood and with only the exception of a small scratch or crack in the front plastic red sight, the Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver was flawless.
Realism: The Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver is the same revolver used in one of the Dirty Hariy Movies and really looks exactly the same. As with all the shell loading BB/pellet/Airsoft Revolvers, they look and perform exactly like the real steel versions other than recoil of course. The only give away for the Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver would be the diameter of the shells as Umarex decided to repurpose the 38/357 shells used in their other smaller caliber shell loading revolvers. It would have been nice to have a larger 44/45 caliber sized shell that they could use in both the Colt 45 Single Action Army Revolvers and this 44 Magnum version of the Smith and Wesson M29 Revolver. The barrel opening is closer to that of a 44 Magnum so they did get that part right.
Pros:
Classic iconic 44 magnum movie revolver.
Mostly all metal build.
Good overall weight, it’s big so expected to weigh a fair amount.
Lots of detail, well made, fit and finish is very good.
Fully S&W Licensed via Umarex.
Love the black chrome look but prone to finger prints.
Simulated wood grips look real enough.
Should have good overall power, accuracy and shots per CO2 (claimed around 80 per CO2).
Adjustable rear sight for windage/elevation with red dot front sight.
CO2 Allen key built into grip.
Recessed barrel true to 44 magnum opening size.
Nice Trigger pull in both single and double action.
Cons:
Shells are closer to 357 not 44 magnum in size.
Don’t like the white writing on the right side.
Black chrome finish shows lots of finger prints and grease.
Comments:
I really like that Umarex decided to give us this more classic Revolver to add to our collection of Airgun Revolvers! I was a big fan of the Dirty Harry Movies so this gun is for sure going to be part of my Airgun collection and even if you are not a fan, you should probably be a fan of the Smith and Wesson M29 which was considered to be one of the most powerful revolvers back in its day. Right now you can get it in 4.5mm Steel BB and 6mm Plastic Airsoft but hopefully there is a .177 caliber Pellet version on its way at some point.
My Table Top Video of the Umarex S&W M29 8 Inch Barrel Shell Loading CO2 BB Revolver:
I have a nice Airgun Pistol Update Unboxing video to checkout where I take a look at 5 Airguns four of which are Gas Blowback Airsoft Pistols and one is a CO2 BB Revolver. I don’t go into a lot of details here on each Airgun as this is mainly just a preview video to let everyone know we have these products in our Online Replica Airgun Stores and give a you a quick look at them. I will be following up with individual Table Top and Field Test Videos where I go into more details and also show you how each gun performs in the Replica Airguns Indoor Sea Can Shooting Range.
Yet another Field test Shooting review for the Crosman AR line of CO2 BB Blowback Full Auto Machine Guns. Today I test out the Pistol version or A4-P model. Basically this is the same BB Gun mechanically as all the other Crosman AR’s but with some cosmetic differences which can affect power and accuracy a bit. And that would be a slightly shorter barrel which can reduce velocity and the lack of a but stock for less stability.
As always I first test out the power or velocity for the Crosman A4-P CO2 Blowback BB Machine Gun, I always use brand new CO2 and make sure the temperature is not too cold in the Replica Airguns Sea Can. Crosman claims around 400+ fps for the Crosman A4-P CO2 Blowback BB Machine Gun and in my Chronograph test I was able to get a 5 shot average of 357 fps. The temperature was not super warm so I would expect on a hot summer day to get closer to 400 fps so pretty close.
I then proceeded to see what kind of accuracy I could get from the Crosman A4-P CO2 Blowback BB Machine Gun shooting 10 rounds in semi auto at a paper target setup 30 feet down range. I use a stabilized shooting position with the Airgun resting on a sand bag up front and me sitting on a stool in the back so the lack of a stock was not a huge drawback here. Regular stand up shooting and not being able to shoulder this Airgun as easily will mean a difference for sure. In semi auto mode with 10 rounds I was able to get around a 2 inch group but I would say this BB Machine gun should get closer to a 1 inch grouping as 8 out of the 10 rounds where all within 1 inch of each other so perhaps some human error on my part was at play here. Just for fun I unloaded the last 15 rounds in full auto on the unsuspecting target and as expected the grouping widened to around 4-5 inches.
Personally I prefer the Crosman AR Full Auto BB guns with a rear stock for that added extended shoulder support but the Crosman A4-P CO2 Blowback BB Machine Gun will fit much better into a back pack if you want to take it out in the woods for some shooting fun. Not everyone has a proper backyard or indoor range to use! the Crosman A4-P CO2 Blowback BB Machine Gun is also one of the coolest looking in this lineup so that has to count for something ;) I wonder what Crosman has planned for their line of Full Auto BB Machine guns now that they have several AR versions and even the AK1. Maybe an MP5 or a SCAR?
Type: BB Pistol/Rifle. Manufacturer: Crosman. Model: A4-P. Materials: Metal & plastic. Weight: 5.3 pounds (2.4 kilograms). Length: 21.2 inches. Propulsion: 12 gram CO2 dual cartridges. Action: Blowback - Semi & full auto, single action only. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 25 rounds. FPS: 430fps. Rate of Fire: 1400 rounds per minute in full auto
Trigger Pull: The trigger pull on the Crosman A4-P CO2 Blowback BB Machine Gun is single action only since the charging handle must be cocked first before you can shoot it. The trigger is short and fairly light as you would expect from an AR type trigger action. The real fun happens with the Crosman A4-P CO2 Blowback BB Machine Gun when you switch it over to full auto mode and with just one pull and hold of the trigger you empty the 25 round magazine in mere seconds. You may want to pickup the Crosman High Capacity magazine if you plan on doing a lot fo full auto shooting!
Accuracy: I have not made my Field Test Shooting Video just yet but you can checkout my Field Test Shooting Video for the Crosman R1 CO2 Blowback BB Machine Gun which is a very similar product to the Crosman A4-P CO2 Blowback BB Machine Gun. I test out the Crosman R1 CO2 Blowback BB Machine Gun using my Chronograph where I get an average of 385 fps and a nice 30 foot grouping of right around 1 inch in semi out and a decently tight full auto group of about 3-4 inches. We should expect about the same with the Crosman A4-P CO2 Blowback BB Machine Gun as long as not being able to shoulder it is a big factor?
Build Quality: The Crosman A4-P CO2 Blowback BB Machine Gun is well made all around just like the rest of the Crosman AR series of BB Machine Guns. Weighing in at 5.3 pounds without any add on accessories it feel solid and well built. There is a lot of metal going on inside and out of this rifle but keep in mind the top and bottom receiver are plastic with metal parts where they need to be like in the internals, pretty much all the working parts are metal, the magazine is full metal, the buffer tub is metal, charging handle, selector switch, magazine release, bolt release, trigger and of course the barrel is metal.
Realism: The Crosman A4-P CO2 Blowback BB Machine Gun is about as real as you are going to get in a CO2 Blowback AR/M4 styled Airgun. You can even take it apart and split the top and bottom receivers like the real steal version. The blowback action gives you some recoil but more importantly offers a true single action trigger and of course the full auto ability we all love. Almost all the working parts work like they would on a real AR / M4 other than the forward assist which is moulded into the receiver. Keep in mind this is the pistol version but like other AR styled “Pistols” the buffer tube area is still required to make the action work.
Pros:
Super realistic working M4/AR 4.5mm BB Rifle just like the other Crosman Rifles in this lineup.
Full blowback operation with both semi and full auto shooting, can feel the blowback operation rocking the gun.
Great weight and feel to it.
Almost everything works exactly like the real steel version. (Charging handle, dust cover, bolt release, magazine release, selector switch).
Duel CO2 metal drop out magazine that holds the 25 4.5mm steel BB’s as well as the dual CO2.
Compact maneuverable pistol version but may be able to add an AR butt stock if you want?
Included red dot sight and ability to add pop-up iron sights.
Lots of rails for mounting additional cool hardware.
Removable flash hider.
Works with Crosman High Capacity magazine.
Cons:
Receiver is plastic but well made and does not compromise feel or weight since there is lots of metal throughout this gun.
No iron sights included.
No but stock included.
Comments:
The Crosman A4-P CO2 Blowback BB Machine Gun is really pretty much the same as the Crosman DPMS SBR and Crosman MPW and Crosman R1 CO2 Blowback BB Machine Gun with more or less Cosmetic changes, most notably being the lack of a butt stock and being more of the pistol version. Like the otters Crosman AR products, the Crosman A4-P CO2 Blowback BB Machine Gun has an AR compatible pistol grip, adn like the Crosman R1 CO2 Blowback BB Machine Gun you also have the ability to change out the flash hider, you can even put a mock suppression on in it if you choose to. No matter which of the Crosman AR Full Auto CO2 BB Rifles you chooses to get they are mechanically every similar and share most of the same parts. If you want the most compact version than the Crosman A4-P CO2 Blowback BB Machine Gun is the way to go!
My Table Top Video of the Crosman A4-P CO2 Blowback BB Machine Gun:
In this Field Test Shooting Video I put some .20 gram Airsoft BB’s through the Action Army AAP-01 GBB Airsoft Pistol to see what the actual velocity is compared to the claimed fps. I also put 10 rounds into a paper target setup 30 feet downrange to find out just how accurate and what kind of grouping I can get from this Gas Blowback Airsoft pistol and also do a full mag dump! If you have not already watched my Table Top Review for the Action Army AAP-01 GBB Airsoft Pistol then make sure to watch if for more specifications and details along with some nice close up video.
For my Chronograph test I placed 5 rounds through my Chrony using .20 gram plastic Airsoft BB’s and was able to average 314 fps with the short barrel and 385 fps with the longer barrel extension added. I was surprised with the addition 70 fps just by adding an extra 4 inches or so to the barrel.
For the accuracy portion of my Field test Shooting Video for the Action Army AAP-01 GBB Airsoft Pistol, I ended up first placing 10 rounds into a fresh paper target setup 30 feet down range. I was using my standard seated and rested shooting position which does offer a fairly stable shooting platform but not without some degree of human interaction. I was a little bit disappointed in the grouping I got as it was one of the larger groupings I have gotten for a test like this spreading out to at least 5-6 inches, still perfectly fine shooting at human target 30-40 feet away. I then uploaded up a full magazine with BB’s and gas and did a mag dump on the same target. As expected there was a lot fo gas and a lot ammo spraying everywhere but the Action Army AAP-01 GBB Airsoft Pistol did make it through the full 22 rounds and get at least some of them on the target.
The Action Army AAP-01 GBB Airsoft Pistol may not be the most accurate GBB Airsoft Pistol out of the box but does offer both semi and full auto and at the end of the day when using this Airsoft Pistol in an actual game situation the accuracy will be not as important since your target will generally be a human torso which is much larger than the 5-6 inch grouping I got. I’m not sure how useful the full auto feature really is in a real world situation but it sure is fun and maybe if you pair up a higher capacity G-series magazine this compact full auto pistol could work as a nice min machine gun!
