I made a video a little bit ago talking about how Canada’s new Bill C-21 will affect pretty every gun owner in Canada including even airgun owners of BB, Pellet Airsoft and even Paintball Guns. Make sure to watch that video first called Bill C-21 Canada is Going After Your Red Ryder BB Gun.

This video is all about how you can get involved in making some waves by signing two online petitions along with contacting your local Member of Parliament and letting them know your disapproval of Bill C-21 and all that it imposes on law abiding Canadian gun owners.

Probably the most important online petition to sign would be the House of Commons Petition E-3201 Bill C-21 so make sure to sign that one!

The other online e-petition we need to sign is the change.org petition.

And lastly but also super important is to send an email to your local member of Parliament again let them know your disapproval of Bill C-21. I have included a link to the web[age where you can locate your local MP and below that is a template of what you could include in your email to them.

https://petitions.ourcommons.ca/en/Petition/Sign/e-3201

Dear (MP),

I am a constituent in your riding. I am writing to you to voice my concerns over the new provisions that were announced under the proposed Bill C-21, and how this will impact myself, my community and many other Canadians.

"Criminal Code 1 (1) The definition replica firearm in subsection 84(1) of the Criminal Code is replaced by the following:

replica firearm means any device that is designed or intended to exactly resemble, or to resemble with near precision, a firearm that is designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second and at a muzzle energy exceeding 5.7 Joules, and that itself is not a firearm, but does not include any such device that is designed or intended to exactly resemble, or to resemble with near precision, an antique firearm; (réplique)

(2) Section 84 of the Act is amended by adding the following after subsection (3.1): Certain firearms deemed to be prohibited devices

(3.2) For the purposes of sections 99 to 101, 103 to 107 and 117.03, a firearm is deemed to be a prohibited device if

(a) it is proved that the firearm is not designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second or at a muzzle energy exceeding 5.7 Joules; and (b) the firearm is designed or intended to exactly resemble, or to resemble with near precision, a firearm, other than an antique firearm, that is designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second and at a muzzle energy exceeding 5.7 Joules."

Make sure to also sign ePetition e-3201 to put a stop to Bill C-21:

https://petitions.ourcommons.ca/en/Petition/Sign/e-3201

View fullsize

In this YouTube Video I test out my new Insta360 One R with the 1 Inch Mod, comparing it to my Sony RX 100 IV to see how they compare against each other.

It’s not really a fair comparison since my Sony RX 100 IV is now 5 or 6 years old which is a long time for a digital camera but it has been really good to me and provided some really great quality video over the years. Compare that to the Insta360 One R that is about a year on the market now and you would think the clear winner would be the Insta360 One R.

On it’s own the Insta360 One R with the standard 4k lens would perform well against the Sony RX 100 IV but the Sony RX 100 IV has a 1 inch sensor allowing it to get the most out of each pixel and since I primarily shoot in 1080p 60 frames per second I need to get as much out of each pixel as I can.

View fullsize

One really great feature about the Insta360 One R is that it is modular so I can swap the 4k module out for a 5.7 k 360 module or even a 1 inch 5.3k module allowing both the Insta360 One R and the Sony RX 100 IV to have that large 1 inch sensor keeping the comparison more inline with each other.

Some things to not that will make a big difference in quality and limitations for this video is that the Insta360 One R 1 Inch Mod was shot using 4k 60 fps while the Sony RX 100 IV was shot using 1080p 60fps. The Insta360 One R 1 Inch Mod has a fixed focus while the Sony RX 100 IV has a variable focus.

Anyway I will let you be the judge and decide which camera you like the look of the video for at least in this shooting situation.

View fullsize

This is by far not a full Review of the Insta360 One R Camera but rather more of my take on the Insta360 One R Camera and what it can do for me and how I plan on using it in by Replica Airguns and Get Fit Over 40 YouTube channels.

View fullsize

I talk about how the Insta360 One R Camera compares to a GoPro type camera and how it can also be much more than a typical action camera because of its ability to morph from one camera to a completely different type of camera because of its modular form factor. Not to mention possible future new hardware lenses and even main modules that could increase the ability of this camera even further.

View fullsize

In this video I show some sample videos I shot using the Insta360 One R Camera with the 4K 60 fps Mod and its 5.3K 30 fps 360 Mod Lenses.

View fullsize

Here are some of the basic Specifications for the Insta360 One R Camera:

Aperture

4K: F2.8

360: F2.0

35mm Equivalent Focal Length

4K: 16.4mm

360: 7.2mm

Photo Resolution

4K: 4000 x 3000 (4:3), 4000 x 2250 (16:9)

360: 6080 x 3040 (2:1)

Video Resolution

4K: 4000x3000@24/25/30fps, 3840x2160@24/25/30/60fps, 2720x1530@24/25/30/60/100fps, 1920x1080@24/25/30/60/120/200fps,

360: 5760x2880@30fps, 5760x2880@24fps, 5760x2880@25fps, 3840x1920@50fps, 3840x1920@30fps, 3008x1504@100fps

Photo Format

4K: jpg, RAW (dng) (RAW files require software on PC/Mac to export.)

360: insp (can be exported via App or Studio), RAW (dng) (RAW files require software on PC/Mac to stitch)

Video Format

4K: insv (can be exported via App or Studio), mp4 (enable in-camera basic stabilization), * The .insv video format has been changed to .mp4 in firmware 1.2.16 and later

360: insv(can be exported via App or Studio), LOG and HDR videos

Video Coding

4K: H.264 / H.265

360: H.264 / H.265

Video Modes

4K: Standard video, HDR video, Timelapse mode, TimeShift mode, Basic stabilization mode (in-camera stabilization), Pro stabilization mode (export with Insta360 app/Studio or supported plugins to apply FlowState stabilization)

360:Standard video, HDR video, Timelapse mode, Bullet Time video

Weight

4K: 121g

360: 130.5g

Dimensions (W x H x D)

4K: 72mm x 48mm x 32.4mm

360: 72mm x 48mm x 43mm

Run Time

4K: 4K@60fps - 70 minutes

360: 5.7K @ 30fps - 70 minutes

Video Bitrate

100Mbps

Gyroscope

6-axis Gyroscope

Compatible Devices

Recommended devices： iOS: A11 or above iOS iPhone SE, iPhone 11/11 Pro/11 Pro Max, iPhone XS/XS Max, iPhone XR, iPhone X, iPhone 8/8 Plus Android: Kirin 980 or above (Huawei Mate20, P30 and above) Qualcomm Snapdragon 845 (Samsung Galaxy S9, Xiaomi Mi 8 and above) Exynos 9810 or above (Samsung S9, S9+, Note9 and above) * Devices that do not meet the above requirements can still use the app to control ONE R, however, some operations with high processing performance requirements such as AI supported functions and video playback, may be sub-optimal.

Photo Modes

Standard photos, HDR photos, Burst, Interval photos, Night Shot, PureShot

Live-streaming

Coming Soon

360 live-streaming, FreeCapture Live (user controls visual perspective)

EV

±4EV

Exposure Modes

Photo Shoot Auto, Manual(Shutter 1/8000s-120s, ISO 100-3200), Shutter Priority(1/8000s-1s), ISO Priority(100-3200) Video Shoot Auto, Manual(Shutter 1/8000 - 1/30, ISO 100-3200)

WB

Auto, 2700K, 4000K, 5000K, 6500K

Bluetooth

BLE4.0

Wi-Fi

5G (Standard range of approximately 20 meters)

USB

Type-C

Micro SD Card

UHS-I V30 speed class, exFAT(FAT64) format SD cards with a max storage of 1T are recommended.

Battery Capacity

1190mAh

Charging Method

Type-C

Charging Time

65mins

Use Environment

-4° F to 104° F (-20℃ to 40℃)

Without the cool cameras there would be no cool Airgun videos and so when a company reached out to me and says… Hey, would you like to try out one of our new 4K Action cameras? I say sure! I can always use another high quality 4K camera for even more angles and who knows what else…

In this unboxing video I take a look at the SJCAM SJ10 Pro Action Camera to see what’s in the box obviously, what it looks like and what my first impressions of the SJCAM SJ10 Pro Action Camera are. I have to say the build quality is a lot better than I thought it was going to be, I’m pretty sure the main body is made out of metal and the crips looking lcd screen pretty much takes up the entire back of the camera. The camera is a lot smaller than I was expecting too which is a good thing since the more compact a camera is, the more likely I will be taking it along with me and using it.

Until I get the chance to play around with the SJCAM SJ10 Pro Action Camera fully and see what the quality and functionality are like, here are some of the specifications and details:

• Sensor Brand: Sony IMX377.

• Sensor Type: 7-Layer Glass with 2 aspherical glass lenses.

• Video Resolutions: Up to 4K60fps without GYRO up to 4K30fps with Supersmooth GYRO Stabilization, Slow-motion 2,4,8x.

• Photo Resolutions: 12MP (4000×3000 4:3) 10M (3648×2736 4:3) 8M 16:9 (3840×2160 16:9) 8M 4:3 (3264×2448 4:3) 5M (2595×1944 4:3) 3M (2048×1536 4:3) 2MHD (1920X1080 16:9.

• Video Format: MP4 (H.264 / H.265 HVEC).

• Wifi: 2.4 Ghz 802.11 a/b/g/n.

• GYRO Stabilization: Inner Six-Axis Gyroscope.

• Digital Zoom: 8x.

• Battery Capacity: 1300 mAh Detachable Battery.

• Battery Duration (Approx.): 140 Minutes at 1080P 95 Minutes at 4K60fps (Front screen and Wifi off).

• Microphone (Audio In): Dual Stereo Microphones.

• Back Screen: 2.33" UHD IPS SuperSensitive Touch Screen with SJCAM UI.

• Storage supported: Up to 128GB micro SD high quality 10 class and higher memory cards.

View fullsize

The following product review for the Comica WS60 UHF Dual Mini Wireless Microphone Combo has nothing to do with Replica Airguns but as a YouTuber with a couple of YouTube channels, I have to make sure I not only have good quality video but also good quality audio when I make a YouTube Video for one of my channels.

After all if it sounds like I’m in a wind tunnel or the bat cave and you can not hear clearly what I’m saying then it can be very distracting for you the viewer to understand what I ‘m trying to share with you!

View fullsize

Perhaps you can also utilize a product like the Comica WS60 UHF Dual Mini Wireless Microphone Combo for your audio and video needs, which could also be for something social media related or even just for your own personal use to get the best quality home video and audio.

For the last couple of years I have been using a lapel mic more and more in my videos and I try to use one whenever possible since the audio is just so much better than the Microphone audio built into the camera. It's not that the camera mics are really all that bad, the problem is that most of the time the camera is simply not close enough to the person speaking so you tend to get a lot of background and room noise which makes the speaking audio sound distant with noticeable ambient noise and echo.

View fullsize

Generally I have been using a wired lapel mic that I record directly into my SmartPhone, which I place in my pocket while recording. I use a different camera to record my vide, I then sync the audio to the video in post production on my computer but this requires a bit of audio and video software know how. The advantage to a wireless setup is that you can record directly into the camera if it supports an audio input meaning no more requirements to sycn audio later and no long cord bwteen the audio source and the camera. A wireless setup usually is more compact and versatile. What I like about the Comica WS60 UHF Dual Mini Wireless Microphone Combo is the fact that it comes with two lapel mics that both have their own transmitter so they can be worn independently by two separate people, perfect for conducting interviews or even when you simply need a mic in more than one location.

View fullsize

In this Comica WS60 UHF Dual Mini Wireless Microphone Combo YouTube Video Review I first unbox the Comica WS60 UHF Dual Mini Wireless Microphone Combo and show you what you get inside the box and talk about some of the basic features and specification. I then test it out and record audio so you can hear for yourself what it sounds like. I first test it plugged into my SmartPhone like I normally do and then I pug it into my DJI Osmo Pocket for a second reference test. Please keep in mind I performed my original testing without monitoring the real time audio output so I did not catch that there was some interference from my overhead LED lighting. I was able to change the channels on my Comica WS60 UHF Dual Mini Wireless Microphone Combo and completely remove the background bussing I was getting from the LED lighting in my room.

View fullsize

Here are some basic Details and Specifications for the Comica WS60 UHF Dual Mini Wireless Microphone Combo.

System:

• Wireless Transmission: Digital UHF

• Number of RF Channels: 24

• Included Transmitters: 2 x Body pack with Microphone

• Diversity: Non-Diversity

• RF Frequency Band: A: 568.125 to 579.125 MHz - B: 580.125 to 591.125 MHz

• RF Bandwidth: 11 MHz

• Max Operating Range: 196.9' / 60 m (Line of Sight) - 98.4' / 30 m (with Obstruction)

• Latency: <40 ms

• Encryption: None

• Modulation: FM

View fullsize

Receiver:

• Form Factor: Camera-Mount / Portable

• Mounting Options: Shoe-Mount, Tabletop (with Included Hardware)

• Antenna: 1 x Internal, Fixed

• Number of Audio Channels: 2

• Audio I/O: 1 x 1/8" / 3.5 mm TRS Female Unbalanced Line Output - 1 x 1/8" / 3.5 mm TRS Female Unbalanced Headphone Output

• Frequency Response: 20 Hz to 18 kHz

• Network I/O: None

• Word Clock I/O:None

• USB/Lightning Connectivity: 1 x USB Type-C (Bus Power, Charging)

• Approximate RF Sensitivity: -83 dBm

• Power Requirements Battery or Bus Power (USB)

• Battery Type: 3 x AAA (Not Included)

• Approx. Battery Life: 4 Hours

• AC/DC Power Adapter: 5 VDC (Not Included)

• Display & Indicators: 1 x Back-Lit LCD (Battery Status, Channel, Data Transmission, Group, Level, RF Level) - 2 x LED (Data Transmission)

• Operating Temperature: 32 to 122°F / 0 to 50°C

• Storage Temperature: -4 to 140°F / -20 to 60°C

• Dimensions: 4.1 x 2.6 x 0.7" / 104 x 65.2 x 18 mm

View fullsize

Transmitter:

• Form Factor: Body pack with Microphone

• RF Output Power: 10 mW

• Audio I/O: 1 x 1/8" / 3.5 mm TRS Female Unbalanced Input

• Pad: None

• Muting: Off/On Switch

• Signal Processing: High-Pass Filter:

• Sync Method: Manual

• Antenna: 1 x Internal, Fixed

• Power Requirements: Battery or Bus Power (USB)

• Battery Type: 3 x AAA (Not Included)

• Approx. Battery Life: 4 Hours

• USB/Lightning Connectivity: 1 x USB Type-C (Bus Power, Charging)

• Display & Indicators: 1 x Back-Lit LCD (Audio Level, Battery Status, Channel, Group, High-Pass Filter, Mute, RF Output Power) - 1 x LED (RF Output Power)

• Operating Temperature: 32 to 122°F / 0 to 50°C

• Storage Temperature: -4 to 140°F / -20 to 60°C

• Dimensions: 4.1 x 2.6 x 0.7" / 104 x 65.2 x 18 mm

View fullsize

Microphone:

• Form Factor: Lavalier

• Color: Black

• Sound Field: Mono

• Output Connectors: 1 x 1/8" / 3.5 mm TRS Male Unbalanced

View fullsize

Packaging Info:

• Package Weight 2.055 lb

• Box Dimensions (LxWxH) 9.7 x 7.3 x 4"

Make sure to watch my full YouTube Video Review for the Comica WS60 UHF Dual Mini Wireless Microphone Combo:

Again I have some new products to show everyone. Some we got a bit of a preview of when I was at SHOT Show 2019 earlier this year but now I have them in my hands to show off and of course will be doing full Table Top and Filed Test for anything new as soon as I can get to them.

View fullsize

Starting with Sig Sauer, they sent me their brand new Sig Sauer P365 CO2 Blowback BB Pistol. This was probably one of my favorite new Air Pistols at SHOT Show simply because it is so small and somehow Sig was able to find a way to put a full size drop out metal magazine that holds both the CO2 and BB’s in it. This is one I am really looking forward to testing out in the Indoor Sea Can Airgun Shooting Range.

View fullsize

Another fantastic product is Crosman’s DPMS Full Auto CO2 BB Rifle which was pretty much perfect the first time around. Well at SHOT Show this year Crosman updated it a bit mainly with some cosmetic changes and now is offering the Crosman MPW, a slightly shorter version of the DPMS and now with an AR Compatible Stock for customizing your Crosman’s MPW Full Auto CO2 BB Rifle.

View fullsize

Yet one more item I was drooling over at SHOT Show 2019 where the Air Venturi Springfield Arms XDM Air Pistols being offered in GBB Airsoft and CO2 BB models along with 3.8 and 4.5 inch versions. It looks like the GBB Airsoft venisons where first out of the factory and I was able to get them in two styles, the Air Venturi Springfield Arms XDM 3.8 GBB Airsoft and Air Venturi Springfield Arms XDM 4.5 GBB Airsoft.

View fullsize

So maybe not as exciting… I also take a look at a NBB CO2 BB Makarov from KWC that is pretty basic but is much less expensive and will offer higher FPS and more shots per CO2 being that it is Non-blowback Airgun. It will be interesting to see how it compares performance wise to the KWC Full Blowback CO2 BB version.

View fullsize

Last but also super cool and I know it’s not really as Airgun related but still something I think everyone will be interested in is the Pocket Shot Pro Arrow Pouch with D-Loop. I reviewed the Pocket Shot “Slingshot” a while back, this new product allows you to use standard Arrows with their new Arrow Pouch getting around 40 pounds of pull and it comes with a trigger release. By the way the Pocket Shot Pro Arrow system is legals to hunt deer with in most US States, I’m not sure about Canada but perhaps here too?

View fullsize

It’s been long time coming but here is the last bit of my journey to get my 1993 Ducati 750 Super Sport licensed and on the road! I know not everyone is going to be interested in a motorcycle video since this is an Airgun channel but a lot of people did mention to me that they wanted to know more about my Ducati and how it was all going. Besides even if you have never owned a motorbike they are super cool to look at and listen to :)

View fullsize

In this “Getting the 1993 Ducati 750 Super Sport on the Road” YouTube video I go through the final process I need to do to get my Ducati 750ss registered and licensed for road use. This final step requires me to get BC Vehicle Inspection done where an authorized mechanic inspects the vehicle to make sure it complies to all the road use standard in place here in Canada BC.

View fullsize

You may want to go back a few months and see where this all started but for now come along with me and watch and see if I make this happen?

View fullsize

You may be asking why a Airgun channel is doing a review of a hand-held microphone. Well part of making good video is also making sure you also record great sounding audio! It doesn't matter how Hi-Def the video is, if you can't hear what I'm saying because the audio is all muffled or drowned out by background sounds then you aren't getting much out of the video.

View fullsize

I have done some other audio product reviews before for similar reasons, I figure some of my viewers and followers may also be interested in making their videos sound better even if it's only a home video. When FiFine approached me a second time to review a product for them I quickly asked if I could review their FiFine KO26 Wireless Hand-held Microphone for those time when I do an interview styled video like at SHOT Show!

In this video review for the FiFine KO26 Wireless Hand-held Microphone I show you what comes in the box and also test out the audio quality while making the video. You will hear various samples of audio from three different recording sources in this video. I start the video out using my Sure Lapel mic while I'm showing you around the FiFine KO26 Wireless Hand-held Microphone, then I briefly switch over to my camera audio and then I finish with the FiFine KO26 Wireless Hand-held Microphone to see how it sounds.

View fullsize

Here are some of the key features and specification for the FiFine KO26 Wireless Hand-held Microphone:

• 2 YEAR NO QUESTIONS ASKED WARRANTY.

• Dynamic Mic with Cardioid pickup pattern. Uni-directional pattern & fine-tuned integrated circuit ensure optimal background noise rejection.

• Frequency response 50-18KHz guarantees clarity of your vocals.

• Metal construction.

• USB 2.0 receiver with headphone jack serves as an external sound card for audio output and monitor.

• Works on Mac, PC, Chromebook, (iOS and Android devices - Require adaptor).

• UHF (Ultra High Frequency 565-584 MHz) gets longer range and more powerful signal than Bluetooth up to 80 feet away even with obstacles.

• 20 selectable frequency channels ensures no problems with interference.

• Easy-to-read LCD screen to indicate battery life and frequency channel.

Since the new home for my Italian addition to the Sea Can Indoor Airgun Shooting Ranges is now situated in my gun range area, I figure you are going to see it beside my airgun target and start asking me about it. So I figured I would make a video all about it and let you know before hand. I do plan on moving the new addition to its permanent home in my garage but while I’m doing a bit of initial work on it and since my garage is in need of some reorganizing, it will have to stay in the sea can for now…

View fullsize

A while back I did review of the 1/4 Scale Mini Replica Guns distributed by Goat Guns. Goat Guns sent them to me for review and at the time we where not selling them in our Replica Airguns Store. Recently we got some of our own 1/4 Scale Mini Replica Guns that I would say are pretty much exactly the same as the Goat Gun Line but with different packaging since they are not distributed by Goat Guns.

View fullsize

The good news is you can get the same product from us now in our Canada and US Replica Airguns Stores! And ours are even pre-assembled for you but if you like you can take them apart similarly to a real gun.

These 1/4 Scale Mini Replica Guns are made out of a lot of metal where you wound find it on the real steel counterpart and most parts operate the same too like removable magazines, working triggers and safety’s, Even the dust covers on the M4’s open when you charge the mini gun!

View fullsize

We carry several models:

• M4A1 RIS 1:4 Scale Model Rifle Display

• M4A1 Digital Camo 1:4 Scale Model Rifle Display

• AK47 1:4 Scale Model Rifle Display

• M83 Sniper 1:4 Scale Model Rifle Display

• L115 Magnum Sniper 1:4 Scale Model Rifle Display

View fullsize

What? Another Drone? Is Replica Airguns becoming a drone review channel... No I am not going to be reviewing drones as a habit but I did decide to upgrade my Yuneec Breeze 4K to a DJI Spark for a number of reasons.

Reason number one it's a DJI and they simply make some of the best Drones you can buy for the money. The main reason I ultimately went with the DJI Spark is because it just takes better quality 1080p Video which is what I'm after. It does this because it has a dedicated 2 axis mechanical gimbal that smoothes out the video even before the internal stabilization gets to it and make the video look even smoother so the end video output is incredibly smooth!

View fullsize

Some other reasons I feel the DJI Spark Fly More Combo was a better option for me are: It's super small, it was not really a lot more expensive, it has better tracking technology and can even understand hand and arm gestures for flying without even using a remote of any kind. The DJI Spark can fly faster and much farther than the Yuneec Breeze and has a little bit better battery run time.

In this DJI Spark Fly More Combo Unboxing Video I open the box for the first time and take a look at what you get inside. I had not flown the DJI Spark or even checked it out yet so everything is new to me and I am seeing it first hand and for the first time. I can say it is way smaller than I thought it was going to be. Look forward to some cool drone video on the channel in some of my upcoming videos...

View fullsize

What some of you may not think about is all the stuff that goes behind the scenes when a Vimeo video is being made. It's a lot more than simply grabbing a camera and saying what's on your mind although that can work sometimes.

Most of the time multiple cameras are used, tripods and special lighting are important and even how you record the audio source can make a huge difference as to the sound and what people hear in your final video.

With all that said I am always looking for a new way to help me out with the quality of my video recording and production. How can I make things look better or more interesting, how can I improve the sound quality and clarity of my videos?

Well today I show you two new products I picked up that I feel will help me out in these areas. First in the audio department I show you my new Wireless Headset/Lapel Mic system from a company called FiFine Technology. They actually sent me their FiFine Wireless Headset and Lapel Mic for free so thanks a lot for that! My plan is to use the FiFine Wireless Headset and Lapel Mic to record the audio portion of my videos rather than the built in mic in my camera since I will get less room noise and better direct voice audio recording. I think it will also be useful when doing outside shooting videos to get super clear audio with less outside noise at all times. For this testing I simply connected the FiFine Wireless Headset and Lapel Mic to my Samsung Android phone using a USB adaptor, the same can be done suing an iPhone.

View fullsize

Moving on now to a new video product, I have been wanting to get a Drone to capture more interesting video that I can shoot from multiple viewing angles and also be able to have a moving camera while I shoot outdoors videos. The problem is they can be kind of expensive for anything decent, because of this, so far I have not been able to justify bitting the  bullet and buying a drone. That was until I saw a great deal on the Yuneec Breeze 4k Selfie Drone at my local Best buy for half price ($249 CAN) What a deal!

Anyways, watch me fumble around while I try to figure things out with my Yuneec Breeze 4k Selfie Drone for the first time, there is always a learning curve when you get something new but I do hope to be able to utilize both of these new products in upcoming videos for everyone.

View fullsize

I've already made a Table Top Video Review for the Pocket Shot Slingshot so make sure to check that video review out for details on the product and some nice closeup video.

I have been wanting to get outside and test out the Pocket Shot Slingshot since I was not confident in my skills and didn't want to shoot inside the See Can Indoor Shooting Range. Well today was the day and the weather was pretty much perfect, just a little bit overcast but still warm enough for some shorts and a light shirt, my kind of weather!

The overcast lighting helped me get some good Chronograph FPS readings for the 1/4 inch and 3/8 inch Steel Ball ammo I was using for my testing. The 1/4 inch Steel Ball was around 16 grain and I was able to get an FPS reading of around 270 feet per second, this gave me a foot pound energy of 2.66 foot pounds using the 1/4 inch Steel Ammo.

View fullsize

Stepping up to the heavier 3/8 inch Steel Ball Ammo, the FPS did drop a bit down to about 244 feet per second. Since the 3/8 inch Steel Ball are heavier at almost 55 grain, the Foot Pound energy went up to just over 7 foot pounds so more than double the energy of the 1/4 inch Steel Ball.

In terms of accuracy, shooting any Slingshot setup is going to come down mainly to the person using it and I am by no means an avid Slingshot user. That said I was able to hit several of the targets I setup about 20-25 feet away with my Pocket Shot Slingshot, some as small as a few inches in diameter so I was pleased with myself for at least hitting something on camera for you all :)

Let me know what you all think of the Pocket Shot Slingshots...

Buy the Pocket Shot Slingshot in Canada.

Buy the Pocket Shot Slingshot in the US.

View fullsize

Todays Video Review is really something different from Replica Airguns but I felt that it might be something that our viewers and customers would find interesting and perhaps consider picking up something like this for themselves down the road? So make sure to let me know what you think and if I get enough positive feedback I'll take a look at getting some of these mini replica rifles in our online store.

View fullsize

The product I am reviewing today are there 1/3 scale replica rifles from Goat Guns. The M4A1, the AK47 and the Tommy Gun. They are non-firing highly detailed mini versions of the real steel guns they are models of. You even build them nearly the same since they come in a kit. All the metal parts you would find on the real steel version are metal in the Goat Guns replicas. You will even find working bolts and triggers, removable magazines, adjustable sights and they even include three small metals bullets you can load into the magazine.

View fullsize

If you're a gun person I'm pretty sure you will die these highly detailed miniature non-firing replica rifles from Goat Guns and the price is really not that bad considering what you get, only about $30-$40 US.

We carry several similar models in our Replica Airguns Canada Store:

• M4A1 RIS 1:4 Scale Model Rifle Display

• M4A1 Digital Camo 1:4 Scale Model Rifle Display

• AK47 1:4 Scale Model Rifle Display

• M83 Sniper 1:4 Scale Model Rifle Display

• L115 Magnum Sniper 1:4 Scale Model Rifle Display

I made a similar video about how to hold your airgun a while back but sometimes they get a bit buried in all the video I make. I feel it's really important how you grip your gun even if it's only an airgun with very little kick or recoil. Proper pistol grip is something you should use no matter what so that you can carry it forward to what ever gun you are shooting.

More kick or recoil means a firmer grip is required to hold the gun so when shooting a powder burner with lots of kick grip becomes even more important.

In this video I go over the proper two handed grip to use when holding a pistol, which hand to hold lose and which had to grip tight, how to overlap your fingers and thumbs.

View fullsize

This is not a BB Gun Review or an Airsoft Gun review or a Pellet Gun review or a Blank Gun review or even an Accessory review? Heck it's not even a Nerf Gun review and I have even done that on this channel :)

What we have here is my first ever Sling Shot based review and even that is not the best description for the Pocket Shot but it's about as close as I can get and really the only product I can compare to the Pocket Shot is a Slingshot. Spoiler alert I think the Pocket Shot kicks but on most traditional Slingshot designs.

View fullsize

I did want to thank the team over at Pocket Shot for supplying me with their Pocket Shot and Pocket Hammer Grip for review, hopefully we can even bring this updated Slingshot design to our Replica Airguns Online Store.

What makes the Pocket Shot different than a standard Slingshot. Mainly the Pocket Shot utilizes a rubber stretchy cup or pouch rather than standard rubber tubes used on Slingshots. The benefit to the Power Shot design is that it is way more compact and much easier and quicker to load since you simply drop your ammo into the cup, pull back and release. So no having to place your ammo into a small pouch with each shot. The Pocket Shot is also more powerful than most Slingshots on the market, you can expect to get up to 350 fps using a Pocket Shot as compared to apron 200 fps from a Slingshot.

View fullsize

Pocket Shot also sent me out there Pocket Hammer Handle that allows the regular Pocket Shot to convert into a more traditional Slingshot grip system. This setup adds a little bit more bulk to the Pocket Shot but allows for a much easier draw.

View fullsize

Another huge advantage to the Pocket Shot is the ability to even shoot arrows by simply adding on their Whisker Biscuit Cap. Make sure to checkout the Pocket Shot website for more info and of course watch my Table Top Review for the Pocket Shot Slingshot. I will be making a Shooting video in the near future.

Buy the Pocket Shot Slingshot in Canada.

Buy the Pocket Shot Slingshot in the US.

I was away in Whistler BC for the last few days with my friend Steve doing some mountain biking before the weather turns cold. We stayed pretty close to the village but found some great single-track trails with a nice variety of terrain to get a great workout in and have a lot of fun riding.

I captured a few moments with my Samsung Gear 360 Video Camera to share my mountain biking experience with everyone. I did bail once pretty good but fortunately I was not wearing my Samsung Gear 360 at the time or it could have been damaged pretty good!

Here are some links to the rides we went on:

• http://www.mapmyrun.com/workout/2457324428
• http://www.mapmyrun.com/workout/2457437315
• http://www.mapmyrun.com/workout/2459872256
• http://www.mapmyrun.com/workout/2459973215

Gear used to make this video:

• Samsung Gear 360 Video Camera.
• Gear 360 Video Stitching Software for Import from camera.
• ScreenFlow for Mac Video Editing Software for editing video.
• Spatial Media Metadata Injector to add 360 video metadata.

View fullsize

Type: Nerf Gun.
Manufacturer: Nerf Hasbro
Model: Rival Zeus MXV-1200.
Materials: Mostly plastic build.
Weight: About 3 pounds with batteries installed.
Ages: 14+ (My son is 10 and he is more than OK with this gun!)
Propulsion: Electric flywheel 6x C batteries.
Action: Semi auto.
Ammunition Type: Nerf High-impact round balls.
Ammunition Capacity: 12 round tube magazine.
Max FPS: 100.

View fullsize

Trigger Pull: The trigger on the Nerf Rival Zeus MXV-1200 is a little long and requires a firm trigger finger but it is not overly heavy. When you press the trigger it allows a Nerf High-impact round ball to advance into the motorized spinning flywheel area where the ball is accelerated and shot out of the inline barrel .

Accuracy: Keep in mind the Nerf Rival Zeus MXV-1200 is designed as a fun in home battle gun so long range accuracy is not really that important. At up to 30 feet or so you shoudl have no problem hitting a person sized target. The Nerf High-impact round balls do come out the the barrel with a fair amount of spin so some random hooking can happen, usually the spin is more of a backspin that helps keep the ammo targeting in a more linear trajectory.

View fullsize

Build Quality: The Nerf Rival Zeus MXV-1200 like most Nerf guns is built to take a fair bit of a beating since the target audience has mainly been kids and we know they are rarely careful with anything ;) The Nerf Rival Zeus MXV-1200 is mainly plastic but as I mentioned it is high quality and so far has held up well to usage. Fit is good with all interchangeable parts working well and the finish has stayed pretty much pristine!

Realism: Nerf guns are not made to be too realistic since they are meant to be toys and not look too closely like a real gun, hence the brightly colored plastic and more futuristic design. I do like the addition of Picatinny styled rails in several locations where one can add accessories like magazine clips, red dots or even a tactical light or laser sight.

View fullsize

Pros:

• Not as extreme as a Paintball gun but a little more intense than a standard Nerf gun.

• Good build quality overall.

• Easy to quickly swap out a fresh 12 rode tube magazine.

• Flip up sights

• Picatinny raise for adding accessories.

• Decent power and accuracy for a Nerf style gun.

• Semit auto action for fast follow up shots.

Cons:

• Will use up batteries pretty quickly.

• Flywheel will slow down when shooting close together semi auto shots.

• Loading magazines does take some getting use to.

View fullsize

Comments:
The Nerf Rival Zeus MXV-1200 is a great option for pretty much anyone looking for a fun battle gun you can use indoors in your home with no worries about breaking windows or messing up your house. not to mention leaving west all over your body! The Nerf Rival Zeus MXV-1200 is going to be a bit more extreme than a standard Nerf gun for sure but way more toned down compares to a paintball gun or even an airsoft gun so if you want some good old rainy day indoor fun then checkout the Nerf Rival line of Nerf guns.

My Vimeo Table Top Full  Review for the Nerf Rival Zeus MXV-1200:

One of the most common types of question I get on my Replica Airguns YouTube channel has to be something like… Why is my Airgun not working? Most of the time the amount of info about the problem is limited to something like… “It was working yesterday but now it’s not working anymore” or something like “when I pull the trigger nothing happens”. My personal favorite is… “I took my gun apart and now it doesn’t work!”

I just made a similar video for Blank Guns and as I said in that video, trying to trouble shoot a mechanical or technical problem over the internet is very difficult, this goes for cars, guns, computers or what have you…

In this Why is My CO2 Airgun Not Working video I will however cover some of the more common and obvious problems I have seen relating to why a CO2 Airgun may not be working properly. I really don’t get a lot of questions about Spring Piston or Pump Airguns so I will be focusing on CO2 Airguns in this video. There will be a lot of crossover with CO2 Airsoft guns so this video may be helpful for some of you Airsofters out there

First let’s get the super obvious stuff out of the way! 

• Did you put a new CO2 cartridge in it and is it pierced all the way?

• Did you load BB’s or Pellets into the Airguns magazine and is the magazine in the gun correctly?

• Is the safety off?

• If the gun is a blowback semi auto single action Airgun then did you pull the slide back prior to the first shot?

CO2 Related Problems:

Not all CO2 cartridges are created equal, they often have slightly different shaped nubs on them and some brands will work better than others in different Airguns. If the shape of the CO2 nub does not fit properly into the valve area then it may not pierce or it could pierce but then not allow you to tighten it all the way losing all the CO2 in the process. If the CO2 is coming form the airguns handle to CO2 Valve area then this is an indication that your problem is related to the area where the CO2 enters the airgun.

There is a seal where the CO2 cartridge buts up to the valve, this seal can be damaged or even deformed from usage or even leaving your CO2 in the gun for too long. The outside CO2 Valve seal can also take the shape of a specific CO2 nub so when you use a different brand CO2 the seal may not properly make concat with the new CO2 type you are using, again causing leaking or even the total loss of all your CO2. Watch my YouTube video on “How to Fix Leaking CO2 in an Airgun”.

CO2 Valve Related Problems:

Again, make sure that Outside CO2 Valve Seal is in good condition and any leaking is not being caused by this problem, if you have checked the Out Side Seal and everything is OK with it then perhaps there is a problem with the CO2 valve?

One indication that your CO2 Valve might be the culprit is the total loss of all your CO2 when you try to insert and tighten a new CO2 Cartridge. Usually all the CO2 will exit the barrel, not the handle or valve area. What may be happening is the valve is stuck open or the internal seal is broken or deformed. If this is the case you will have to remove the valve and have a look inside, this is a lot easier on CO2 airguns that have the CO2 valve in the magazine, if the CO2 valve is in the actual Airguns then a lot more disassembly may be required and I would recommend an Airgun technician take care of this for you.

If the gavel is in the magazine then you will have to unscrew it, you may require a special tool for this? Once the valve is out of the magazine  take a look inside and examine the internal seal, also look for any bits of metal shavings as they can disrupt the action of the valve causing leaking. Give the inside of the valve a good clean and then lubricate it with some silence spray. hopefully that fixes your problem!

BB’s getting Stuck in the Blowback Gas Tube:

I have actually made a dedicated video for this problem so I will put a link to it in the description of this video. The main reason people may have this problem is because we all like to rack that slide on our full blowback Airguns, but if you have a fully loaded magazine then each time you reach that slide without shooting the gun, you are inadvertently trying to load another BB into the breach area, the breach is only designed to hold one BB at a time so after a few racks of the slide the newly loaded have no place to go but into the Gas Tube where they can get stuck and cause having to the operation of your Full Blowback CO2 Airgun.

BB’s Rolling Out of the Barrel of Your CO2 Airgun:

This is not actually a fault of the gun but happens because of the way the gun is designed. This situation can happen with certain CO2 Airguns when the gun user pulls the trigger really slowly while the gun is point slightly in a downward position. What is actually happening is the first part of the trigger is made to draw a BB from the magazine into the breach of the gun. If the barrel of the gun does not have a rubber hop-up stopper in it then the BB is free to roll down the barrel and out of the gun. How do you fix this problem? Be more committed to your trigger pull and or shoot at a target that is not so low. Perhaps place your targets slightly higher than the gun so the barrel is not pointing down, especially if you like to take your time with the trigger :)

A Little Maintenance Can Go a Long Way!

Sometimes a good cleans is all you need to do to get things working as they should, again I have already made video Tutorial Showing “How to Clean Airguns and Blank Guns”.

What about stuff like My Airgun is jammed or my trigger is stuck or some random part fell out of my gun?

There is only so much I can cover in this video, most other problems are going to get a bit more complicated to fix and I suggest if your Airgun is not working and the suggestions I have made in this video do not solve your problem, then consider taking your gun into a gun tech.