In this comparison video I look at a variety of different Beretta 92/Taurus PT92 Airguns and compare them to each other to determine which one I feel is the best Beretta/Taurus Airgun. Keep in mind what's best in for me may not be best for you.
In this comparison video I look at a variety of different 1911 Airguns and compare them to each other to determine which one I feel is the best 1911 Airgun, well at least for me.
Another revisit for an inexpensive and fun BB shooter, the Crosman Marlin Cowboy BB Rifle! I have done some previous video reviews and comparisons for the Crosman Marlin Cowboy BB Rifle so make sure to check them out. I also recently did an update Field Test Shooting Video for the Daisy Red Ryder BB gun which is a very comparable airgun to the Crosman Marlin Cowboy BB Rifle.
Here is a quick overview of the Crosman Marlin Cowboy BB Rifle, it's designed for younger smaller shooter with it's short stock but it's still fun of all ages! You can store 700 4.5mm Steel BB's in its internal magazine and Crosman claims a max velocity of 350 fps. Like the Daisy Red Ryder the power source is a spring piston that is activated by the lever action.
Now let's talk about how the Crosman Marlin Cowboy BB Rifle performed in my Sea Can Field Test Shooting test... Crosman claims a max fps of 350, my Chronograph results came in at a 5 shot average of 316 fps which is not bad compared to the Daisy Red Ryder that also has a claimed fps of 350 but only shot around 240 fps.
So the Crosman Marlin Cowboy BB Rifle is the clear winner in terms of velocity over the Daisy Red Ryder but what about accuracy? That's a different story, the Crosman did not perform all that great for me shooting at a paper target 30 feet away using a rested shooting position. I shot 10 rounds at my paper target and got about a 5-6 inch grouping, there was an underlying smaller tight group that was closer to about 3 inches but a god 3-4 of the BB's came out of it spreading out the group significantly. Compare that to the Daisy Red Ryder with a nice tight 2 inch group.
So what do you want? Power or accuracy? I figure since the Crosman Marlin Cowboy BB Rifle is really targeted of the younger more entry level shooter that it should have good accuracy so they know when they are doing it right and less concerned on if the gun is performing as it should. Sure power is fun and smashing your targets does give a certain satisfaction but you have to hit the target first :)
Type: Air Pistol. Manufacturer: Sig Sauer Model:Sig Sauer Spartan & Max Michel 1911 Materials: Mostly all metal build. Weight: 2.06 pounds (934 Grams). Barrel: 5 inches - Non-rifled. Propulsion: 12 gram CO2. Action: Blowback single action only. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 16 round stick magazine. Max FPS: 410.
Trigger Pull: The trigger pull on the Sig 1911 CO2 blowback pistols is excellent! juts like a real 1911 it is single action only and both Sig Sauer 1911's have very short and very light trigger pulls. To make the shooting experience even more realistic you will need to engage the working back strap safety in order to shot these guns, again just like a real 1911.
Accuracy: I have not done my official Field Test Shooting Video for the these Sig Sauer CO2 Blowback 1911's but I did do a shooting field test for the Daisy Winchester Model 11 which these guns are built in design from. The Daisy Model 11 on a rather cold day shot around 360 fps so I am expecting better results from the new updated Sig Sauer Max Michal and Spartan especially in warmer shooting conditions. during my previous Daisy Model 11 testing I was also able to get around a 2 inch 10 shot grouping from a 30 foot shooting position.
Build Quality: Both of the Sig Sauer Spartan and Max Michel Blowback CO2 airguns are built really well, they feel solid in the hand and all the mechanical parts feel tight, the finish is also nice and does not show any signs of wearing. You will find metal parts pretty much everywhere except the magazines, even the safety, magazine release and slide catch are metal, it's kind of too bad the magazine was also not metal?
Realism: Sig Sauer modeled the Spartan and Max Michel after their real steel version and overall they are very similar with the exception that neither of the real steel version have under barrel rails, you will also find adjustable sights on both of the real steel versions and of course proper full size magazines. Other than that both the Sig Sauer CO2 Blowback 1911/s look the part and have full Sig Sauer Licensing and branding,
Good overall replica of the real steel 1911 Sig Sauer pistols.
Really nice single action trigger.
Full Sig Sauer markings and licensing.
Cam lever system for easy CO2 loading.
Working grip safety.
Can expect reasonably decent blowback feel.
Higher fps than the KWC 1911’s range.
White dot sights front and back.
Rail for accessories.
Cons:
Plastic stick magazine.
Rail would not be on the original Sig Sauer pistols.
Sights are pretty basic and none adjustable.
Would have liked a more recessed barrel.
CO2 Grip comes off pretty easily.
Comments: I know that everyone seems to like airguns with full size drop out metal magazines and yes it does make the airgun look and feel more realistic but once the magazine is in the gun the experience for the most part is the same. Having a stick magazine in this case allows for a more efficient CO2 delivery which should increase power and shots per CO2, I know a lot of people complain about the low FPS of the KWC 1911's so if this is you then perhaps you then you may need to give up a full size mag for more power and shots per CO2? Other then the stick mag issue both the Sig Sauer Spartan and Max Michel are really nice CO2 Blowback Airguns and I am really hoping they perform well when I get to my field test shooting review shortly.
My Vimeo Table Top Review of the Sig Sauer Spartan & Max Michel Blowback CO2 BB Pistols:
The Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol is a really nice evolution to the already existing line of Sig Sauer ASP Pellet Pistols. The 30 round belt fed pellet magazine is what really sets it apart from the Sig ASP P250 and Sig ASP P226 which both share the traditional double sided 8 round rotary pellet magazines found in other CO2 pellet pistols like the Umarex PX4 and ASG CZ P-09 Duty.
The big question I had was how is the trigger going to feel and is a 30 round belt magazine going to be reliable? Will other aspects of the Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol function and perform like its rotary magazine brothers?
During my Chronograph feet per second shooting test I compared all three blowback pellet pistols shooting five rounds from each of them using a brand new CO2 and Sig Sauer 5.25 grain Match Ballistic Alloy Pellets. It was a close race with the Sig ASP P250 averaging 413 fps, the Sig ASP P226 just under with a 409 fps average and the Sig ASP P320 coming in a very close third at 405 fps. Only about 8 fps separating all of them!
Moving on to the target portion of my testing. As per my standard Field Test Shooting Reviews I setup my paper targets about 30 feet from my rested shooting position and since the ASP P250 and P226 both have 8 rounds per side rotary magazines I decided to shoot an 8 round grouping with all three Sig ASP pellet pistols. It was really close and perhaps one could say most of the variability was because of the human factor. All three CO2 Blowback Pellet Pistols shot about 2 inch groupings with perhaps one or two outliers, again most likely my fault :) I would say the Sig Sauer ASP P250 was perhaps the most accurate with the tightest of the three groups and also the most centered. The Sig Sauer ASP P226 and Sig Sauer ASP P320 where both a close second with both of them shooting just a tad left on target but pretty close to the center.
What about that Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol trigger and belt fed magazine? The trigger actually felt great, much lighter than I was expecting and I did not have one pellet feed error during my entire testing. At the end of the day all three Sig ASP pellet guns performed about the same, but I have to say having 30 rounds at your disposal without having to reload or rotate the stick mag really makes the Sig ASP P320 stand out and perhaps make it the winner in a very close contest.
Trigger Pull: The trigger pull on the Umarex Beretta APX CO2 Blowback BB Pistol is a little different then that of the real steel APX. On the real steel APX there is actually a trigger safety and the actual gun uses a striker based system with a fairly short reset and take-up. On the replica Airgun version the trigger does not have a built in safety and the reset and take-up are much longer (full length). I have read that both the real steal and BB versions of the APX both have about 6 pounds trigger pulls but I personally felt like the Airgun version was heavier than that, perhaps because of the long pull. Overall the Umarex Beretta APX CO2 Blowback BB Pistol trigger is acceptable but not my favorite.
Accuracy: I have not shot the Umarex Beretta APX CO2 Blowback BB Pistol so far but based on similar blowback stick magazine BB air pistols from Umarex with around 400 fps performance, I know that it will have a medium blowback feel and should shoot pretty close to the claimed 395 fps. I also expect at least a 2 inch or smaller 10 shot grouping from 30 feet back.
Build Quality: Very good, the Umarex Beretta APX CO2 Blowback BB Pistol feels heavier than 1.5 pounds in the hand, perhaps because it is a more compact gun. The metal slide, metal stick mag and internal metal parts all help to balance off the polymer frame nicely. Fit and finish is also good.
Realism: The Umarex Beretta APX CO2 Blowback BB Pistol overall is a really close replica to the real steel APX other than the added safety and missing trigger safety. The added safety does not stand out too much and does serve a purpose while the missing trigger safety could of at least been there for show if not an actual working safety. Other than that the Umarex Beretta APX CO2 Blowback BB Pistol is very close to the Beretta APX with its full licensing, open ejection port, recessed barrel working slide catch release and blowback operation. Available at the:Replica Airguns Store
Pros:
Great weight and feel to it, build quality seems really good.
Really nice replica of the original Beretta APX in most ways.
Working slide catch and release.
Fully Beretta licensed.
Easy to see white dot sights front and back.
Recessed barrel and open ejection port for added realism.
Accessory rail for adding a laser or tactical light.
Stick magazine but plate gives the elusion of a full size magazine and covers the CO2 tab.
Warning instruction are nice and discreet!
Cons:
Trigger is a bit long and perhaps heavier than the real steel APX trigger. It also does not have the trigger safety.
Has a stick magazine rather than a full size magazine.
Sights are non-adjustable which is common with airguns like this one.
Comments:
It's always nice to get another airgun replica for fans of that particular real steel gun so they have a low cost shooting option they can use in a lot more locations for some safe trigger time. The Umarex Beretta APX CO2 Blowback BB Pistol is a great addition for sure and it's also nice that it is somewhat Glock like in looks and operation for those Glock fans out there that are having a tuff time locating a Glock airgun replica :) Other than my trigger beef, I really like the Umarex Beretta APX CO2 Blowback BB Pistol. I hope it performs as good as it looks when I do my field test shooting video in a bit.
My Vimeo Videos for the Umarex Beretta APX CO2 Blowback BB Pistol:
I know this video is going to excite many of you if you already like the basic KWC 1911 and PT92, also known as the Tanfoglio Witness, GSG 92 and many other almost exactly the same guns from Swiss Arms, Gletcher, Cybergun and even Umarex and Crosman.
There are tons of these KWC CO2 Blowback BB Pistols and Airsoft Pistols on the market in various versions with all kinds of different licensing on them and I have seen lots of custom modification photos from my viewers showing me how thy have striped and polished their KWC blowback Air Pistols and even added real wood grips.
That's why I think it's super cool that now you can get your already blinged out and polished Cybergun/KWC 1911 or PT92 and realy for not a lot more money at the end of the day! The real problems is availability since these stainless versions are in high demand.
So what are we looking at in this video? I have two Cybergun/KWC 1911's one is a basic 1911 A1 with a parkerized and stainless frame and slide, you also have a real wood look grip (Looks like wood but is not actually wood...) The basic Swiss Arms 1911 has been called the SA 1911 Seventies Stainless Pistol while the more tactical Swiss Arms SA 1911 is rightfully called the SA 1911 Tactical Rail System since it has a lot more tactical features like a rail, ambidextrous safety, white dot sights, and tactical trigger and hammer.
The Swiss Arms SA 92 Stainless which is essentially very similar to the GSG 92 or KWC PT92 again offers a parkerized and stainless frame and slide with the simulated wood grips.
Make sure to watch my update video for these three very attractive Swiss Arms CO2 Blowback BB Pistols from Cybergun/KWC and if you're interested in purchasing one you like then see if we have them in stock in our Canada Replica Airguns Store.
Type: Air Pistol. Manufacturer: Sig Sauer ASP Model:Sig Sauer ASP P320. Materials: Metal and plastic build. Weight: 1.81 pounds (821 Grams). Barrel: 4.75 inches - Rifled steel. Propulsion: 12 gram CO2. Action: Blowback single and double action. Ammunition Type: .177 caliber pellets and 4.5mm Steel BB's. Ammunition Capacity: 30 round belt fed stick magazine. Max FPS: 430.
Trigger Pull: The trigger pull on the Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol is a lot better than I thought it was going to be considering each time you pull the trigger it has to advance the 30 round belt fed magazine and cock the internal hammer since it is double action only. The blowback operation is really only for show and feel since it does not cock the hammer for a more single action type trigger pull. You can expect a fairly long trigger pull because it is double action only but overall it is not too heavy.
Accuracy: I have not done my official Field Test Shooting Video for the Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol but hope to have it done shortly. Since I also haven't really done an official shooting test for the Sig Sauer P350 and P226, I figure I will test out all three of them at the same time.
Build Quality: The Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol is a bit heavier (closer to 2 pounds) than the P250 which hits the scale at only 1.5 pounds , this does make the Sig Sauer P320 feel a bit more solid in the hand. The Sig Sauer P320 has a metal slide and polymer frames similar to the real steel version which gives it authentic weight, balance and handling. Sig claims that their entire APS line of pellet guns is life tested for 15,000 shots so you know this gun is going to last and provide years of shooting fun. The fit and finish seem really good, so far no real paint or finish problems and all mechanically everything is operating as it should.
Realism: The Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol is a very close replica of the real steel Sig Sauer P320. The hammer, slide catch release and take down leaver are purely for show with the hammer being moulded into the slide and frame. One slight disappointment for me is when a gun does not have a cut out ejection port, that is also the case with the otters ASP Sig Sauer airguns like the P226 and P250 but it does not take away from the shooting fun in any way.
Good overall replica of the real steel Sig Sauer P320.
Designed by Sig Sauer and made in Japan, fully Sig Sauer licensed.
Should have nice heavy blowback operation like the ASP P250 and P226.
Has better weight than the P250, almost half a pound heavier.
White dot sights for easy target acquisition and accessory rail for add ons.
Super high capacity 30 round belt feed magazine.
Decent feel to the trigger not heavy or as sticky as I thought it might be having a 30 round belt fed magazine.
Cons:
Hammer is moulded into the slide and frame, does not function at all.
Sight are non adjustable.
Ejection port is not cut out and there is no working slide catch.
Comments: I was happy when Sig Sauer released their ASP Sig P250 and P226 CO2 Blowback Pellet Pistols with their 16 round double sided stick magazines like we have seen in several otters CO2 Pellet Pistols. But I love the introduction of the 30 round belt fed magazine. I am hoping the belt fed magazine performs while actually shooting pellets as good as it feels when dry firing it, I guess we will have to wait and see when I do my Field Test Shooting Video :) Overall the new Sig Sauer ASP P320 Pellet Pistol looks to be an upgrade of sure to the P250 in terms of improved weight and a higher capacity magazine.
My Vimeo Table Top Review of the Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol:
Well the Shipping Container Office and Airgun Shooting Range is finally all ready to use and so for this first ever airguns shooting video in it, I simply wanted to try out a couple of airguns and see how this new setup worked. I also wanted to play around with some camera position setup to see how it all looked and if there will be any additional lighting or placement considerations.
Summer is here! While some folks are working on a tan, you're out working on your aim. This weekend, stock up on all the essentials — ammo, CO2, targets, extra mags — so you can shoot until the sun goes down.
When you spend $50 or more on any items, we'll ship them to you for free! Ends Monday, so don't wait.
I got a lot done this week in the Shipping Container Project Office and Airgun Shooting Range. Finished up all the drywall office mudding, I primed and painted the the office, connected up all the electrical and office lighting and installed the hardwood and baseboard along with the trimming. All that's left in the office is some caulking, paint touchup and then I have to figure out how I'm going to finish up the shooting hole? I do have some ideas for it though...
Next week I will be working on these odds and ends and hopefully may even get the shooting range spray foam insulted?
About three weeks ago I started the interior construction of the Shipping Container Project. So far I have cut out the window and door, framed the office in, installed the window and door, done some preliminary painting, wired in electricity for the entire unit, added an internet line, run underground wiring to the main house, installed insulation and vapor barrier and last but not least, added the drywall. I would have to say the worst is over and now I look forward to more of the finishing work like painting, flooring, connecting the electrical plugs and lighting fixtures.
The only real big jobs left to do would be painting the outside of the Sea Can and spray foam insulating the shooting range area but the spray foaming I will be contracting out and getting it done professionally so that part will be easy at least!
Yup, another Shipping Container Project Update Video! For those of you interested in this project I am sure you have been waiting with baited breath ;) And for those wanting more airgun videos you are probably wondering when I will resume making more... Heck, I'm with you on that one, this manual labour stuff is way harder than making airgun videos, but it is all for the greater good. I will try and slip in some airgun related videos before this Shipping Container Project is finished, that's almost a promise!!!
At this point I am almost ready for drywall, all the electrical is completed including running the power and Internetunderground to the poorhouse and main house. I need to have my Internets at full jam, that's a must!
This week I will be getting the electirfcal all hooked up to the main box, adding isulation and vapour barrier, some more window baar cleanup and painting and by end of the week I hope to have the drywall in place along with the taping and first layer of mud.
Oh yah, this video also includes a huge bonfire, every spring and fall we usually burn all the fallen branches and yard debris, everyone comes out and enjoys the huge fire :)
The Shipping Container Project is moving along nicely, this past week I finished up my office area framing, I also got the door and window cutout and installed! Next up on my list is cleaning up and painting the window bars so I can make the unit a bit more secure. I suppose I will have to do the same with the metal door since it is in dire need of a facelift. Once the doors and windows are all taken care of I will be moving on to the electrical and wiring. My goal is to get all of this done by end of week... The sooner I get this Shipping Container Project done the sooner I can get back to making even better and more consistent airgun videos in my new home.
This week I started framing in my new office and in this video I show the wall closest to the airgun range where the door and shooting opening are situated. I managed to frame the back wall in too. I also talk about how much time it takes even before you pick up a drill or hammer simply planning everything out and acquiring all the supplies required for a project like this. I have spent a ton of time researching what I need to make this Shipping Container Project into the vision I have for it. Spoiler alert, in my next video the framing is all done including the installation of my window and outside door, glad that part is over!
No need to hunt for deals this Easter, EVERYTHING in our store is on sale! So kickoff your long weekend with a long-barreled revolver. Celebrate spring’s arrival with a spring powered sniper rifle. Or treat yourself to a hollow chocolate bunny and some hollow point pellets. This deal ends soon, so hop to it!
Lately I have been doing a lot of sourcing out figuring out how everything is going to be laid out, what kind of lighting I want to use, how am I going to heat the office area in my shipping container. I want to keep everything pretty low power so my plan is to go with all LED lighting and a 400 Watt heater which should be
fine in my 90 square foot insulated office space. I plan to blast the shooting range with some propane heat on days when I need it for the shooting testing during the colder months.
I did pickup some hardwood flooring pretty cheap at Big Box Store and also got my 3x6 office window from Surrey New and Used. I already have metal doors that my father-in-law has had stashed away for several decades but at least now they are going to come in handy.
The first job or actual work I needed to do on the Shipping Container Project was to level and place the Sea Can onto some bricks/slabs, this also helps to keep the underside dry so it does not rust out. There shouldn't be much settling since the storage container is resting on my gravel parking area and the gravel goes right down about 1 foot deep to the hard pan.
Next on my list is starting the framing, figuring out exactly where the windows and doors will be and of course cutting the container to fit them.
This Vimeo video will be a little different than most, sorry no shooting and not even a single gun to show anywhere in this video! But it will lead to hopefully better shooting field test and table top videos down the road as I will have a dedicated space not only to work but to also shoot my review airguns.
Today, well actually yesterday a 40 foot shipping container (Sea Can) showed up at my house. This new metal box is going to be my airgun shooting range and office space combined. It will contain a 30 foot airgun shooting range closest to the rear doors so that I can open them and create a longer range if necessary. The front 10-12 feet of the container will be my work office space where. I will also use some of the container for storage.
Over the next few weeks I will be leveling the container, framing and insulating the office area, adding some electricity and lighting and of course completing some finishing work to the office space to make it more cozy. Eventually I hope to do some outside work giving the container some more curb appeal with a new coat of paint.
I plan to make more videos to share with everyone of the work progress as it happens so keep watching...
Trigger Pull: The trigger pull on the ASG/KJWorks Beretta X9 Classic is very good in both single and double action. Double action is a bit longer and heavier than when shooting in single action since the hammer is being drawn back, but not overly heavy by any means. Single action shooting is short, light and crisp as you would expect when shooting a real steel Beretta 92 style pistol.
Accuracy: I have not done my actual Field Test Shooting video review for the ASG/KJWorks Beretta X9 Classic CO2 BB Pistol but I did get the chance to make a short preview video where I shot the Airsoft version of this M9 Beretta at some clay pigeons setup around 20 feet away. I was able to pop the center out of the clay pigeons no problem and found that even without any practice I was consistently hitting dead center on most shots. I am not sure exactly what the FPS will be btu it shoudl for sure get at least the claimed 312 fps if not a bit more.
Build Quality: As expected, the ASG X9 Classic Beretta M9 CO2 Blowback 4.5mm BB Pistol build quality is just like all the other KJWorks Airsoft guns I've tested so far. The ASG 4.5mm Steel BB shooting X9 Classic has more of a Matt finish but I kind of like it, not so many finger prints on the gun. All the tolerances between the moving parts like the slide and frame are very tight showing excellent workmanship and machining from KJWorks.
Realism: The ASG X9 Classic Beretta M9 CO2 Blowback 4.5mm BB Pistol is an excellent copy of the real steel popular Beretta M9, it is really hard to tell it apart from the real version and the ASG X9 Classic can even be field stripped in the same manor as a real Beretta M9 Semi Auto pistol with the similar functioning parts. The only missing aspect would be Beretta Licensing since the ASG version is unlicensed.
All metal design, fit and finish is very good as is with all KJWorks made guns.
Strong slide spring so should have nice heavy blowback action.
Realistic working safety and working slide catch and release.
Full size dropout metal magazine that holds steel BB's and CO2.
Can be field stripped like original Beretta M9.
KJWorks quality.
Cons:
Not licensed like the Umarex version.
None adjustable sights and white dot sights are kind of light.
Will eat up CO2 pretty quickly.
Comments:
There are very few 4.5mm Steel BB guns made by KJWorks and it seems that ASG as far as I know is the only distributer that has teamed up with KJWork to have them make some of their guns, I reviewed the ASG CZ 75 which is another ASG/KJWorks distributer 4.5mm CO2 Blowback Pistol. I don't even think you can get the 4.5mm Steel BB shooting version direct from KJWork? What I love most of all about the ASG X9 Classic Beretta M9 CO2 Blowback 4.5mm BB Pistol is that it is made by KJWorks since there are already a lot of Beretta M9's and Mod. 92's already out there but if I could only have one it would probably be the ASG X9 Classsic!
My Vimeo Table Top Review of the ASG X9 Classic Beretta M9 CO2 Blowback 4.5mm BB Pistol:
