USA Flag US Store
Canada Flag Canada Store

Replica Airguns CA & US Stores

Entries in Comparison,Non Airguns

EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol Table Top Review.

No Comments

Type: GBB Airsoft Pistol.
Manufacturer: Made by EMG.
Model: TTI JW4 2011 Pit Viper.
Materials: Aluminum & polymer components.
Weight: 2.26 pounds (1025 grams).
Length: 8.5 inches (2167mm).
Propulsion: CO2/Green gas.
Action: Semi auto blowback, single action only trigger.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 28-30 round drop out full size metal magazine.
FPS: Claimed 370-390.

Trigger Pull: The single action only trigger pull on the EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol is really great, there is virtually zero take-up with a light, crisp and easy release. You can double tap with ease making the EMG TTI STI 2011 Combat Master a great action pistol. One of the shortest and smoothest 1911 triggers I have tested, similar to the EMG TTI JW3 Combat Master.

Accuracy: At this point I have not shot the EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol so I have no idea what the actual real world fps is going to be and how accurate it proves itself so my comments for this part of the review will have to wait till I perform my Field Test Shooting Video coming up shortly. I do however expect it to perform very close to the EMG TTI STI 2011 Combat Master I already made a Field test Video Review for so you can check that on out in the mean time…

Build Quality: The EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol is for the most part an all metal gun with a CNC Machined Aluminum Slide and aluminum barrel along with mostly metal parts throughout including much of the frame. Parts of the frame are polymer including the grip area and trigger guard. The fit and finish is awesome on the EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol with attention to detail everywhere.

Realism: The EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol is based off of the Pit Viper TTI, a replica of the John Wick pistol used in the John Wick 4 movie and is virtually the spitting image to it. You will find licensing and trademarks where you would find them on the real steel version. Of course all the mechanical parts work like the real version and the EMG TTI STI 2011 Combat Master can be fully field stripped allowing for quick and easy hop-up adjustments.

Pros:

  • Super crisp, light and short SAO trigger.

  • Fit and finish is excellent, very little slide wiggle.

  • extremely close replica of the Pit Viper 2011 pistol used in the John Wick 4 movie.

  • Rear sight is fully adjustable and sits very flush with the slide.

  • Fiber optic front sight helps with quick targets acquisition.

  • CNC machined Aluminum slide and barrel with polymer frame.

  • Flared magwell for easy quick magazine reloading.

  • Full size high capacity 30 round double stack metal magazine.

  • Ambidextrous thumb safeties.

  • Working grip safety as you would expect on a 1911 based gun.

  • Most Mechanical parts work just like a steel version and can be easily field stripped to access hop-up.

  • Nice snappy and fast blowback action, great for action shooting.

  • Licensing all over this gun true to the real steel version.

Cons:

  • Comes with the red tip but can be remove pretty easily.

  • Getting magazine but plate off is a bit tuff.

  • No white dot’s or fiber optics in the rear sight.

Comments:

The EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol is another great Replica of a John Wick pistol and has a less squared and smaller stature than the EMG Combat Master and a smoother overall look to it. What’s nice is that the magazines are interchangeable between the EMG TTI JW3 and JW4 versions so if you already have one then you will get additional magazine options, perhaps one in Green Gas and one in CO2. I like the slightly bulkier feel to the Combat Master but the Pit Viper is also a decent size, but again slightly more compact and less edges to get caught on your surroundings. Either way, both are awesome options if you are John Wick fan.

Categories: 6mm, Airsoft, Blowback, CO2, Comparison, GBB, Gas, Pistol, Review, Semi Auto, Vimeo Video Tags: EMG, Pit Viper, TTI, M1911

Umarex T4E HK VP9 .43 Cal. Paintball Pistol Table Top Review

No Comments

Type: Paintball Gun.
Manufacturer: Umarex - T4E.
Model: T4E HK VP9
Materials: Metal & Polymer.
Weight: 790 grams (1.7 pounds).
Barrel: Smooth bore.
Power Source: 1x12 gram CO2.
Action: DAO Semi-Automatic with blowback action.
Ammo Type: .43 Caliber Paintball / Rubber Ball / Pepper Ball.
Ammo Capacity: 8 Rounds.
FPS: 300.

Trigger Pull: The trigger pull on Umarex T4E HK VP9 .43 Cal. Paintball Pistol feels a lot like a double action trigger mainly because when you pull the trigger, the inner barrel travels backwards into the magazine placing a paintball round in the barrel which seals the barrel with the magazine so less CO2 is wasted. This does make the trigger a little bit longer and heavier than a single action trigger because of the added friction. The internal hammer/striker is engaged from the blowback action which does help lesson the overall triggers pull weight.

Accuracy: So far I have not had the opportunity to test the Umarex T4E HK VP9 .43 Cal. Paintball Pistol, so stay posted for my upcoming Field Test Shooting Video where I will see what kind of velocity and accuracy we can expect from the Umarex T4E HK VP9 .43 Cal. Paintball Pistol. For now you can watch my Field Test Shooting Video for the Umarex T4E S&W M&P9 M2.0 .43 Cal. Paintball Pistol as it is very similar in design and should for the most part perform in a similar manner.

Build Quality: The build quality of the Umarex T4E HK VP9 .43 Cal. Paintball Pistol is good overal, you will find metal parts are where you would expect them to be, in the slide, slide catch, barrel, magazine and most internal parts giving the Umarex T4E HK VP9 .43 Cal. Paintball Pistol a decent overall weight of almost 2 pounds with the magazine in which makes the Paintball version feel comparable to a real steel HK VP9 (710 grams - 25 ounces). The T4E HK VP9 does have a polymer frame but again this is normal with todays modern guns and helps keep the weight down. Fit and finish is also very good!

Realism: The Umarex T4E HK VP9 .43 Cal. Paintball Pistol is a fully licensed replica of the real steel HK VP9 via its Umarex Licensing. The Umarex T4E HK VP9 .43 Cal. Paintball Pistol is made specifically as a training tool for owners of similar real steel HK Handguns so for that reason it is made to replicate its powder burning counterpart very closely. You will find that the slide cycle distance is a bit shorter than it would be meaning that when the side catch is engaged the slide does not go as far back in the 9mm version. Field stripping the Umarex T4E HK VP9 .43 Cal. Paintball Pistol will requires some tools and pin removal.

Pros:

  • Accurate weight and solid feeling gun.

  • Full Metal slide that locks back on the last shot.

  • All metal heavy full size drop out magazine adds some additional weight to the gun.

  • Good for real steel H&K VP9 owners looking for a similar training weapon.

  • Everything works pretty much like the real gun so again great as a training tool.

  • Easy to see white dot sights front and back.

  • Working trigger safety

  • Fit and finish is very good.

  • Magazine spring release pops the magazine out just enough to grab it but not drop it on the floor.

  • .43 caliber barrel opening, adds to realism.

  • Warning instructions are a lot more discrete under the trigger guard and not super white in color.

  • Comes with additional grip parts to customize to various hand sizes.

Cons:

  • Magazine only holds 8 rounds, so you are going to need extra magazines for sure.

  • Blowback action is not full blowback, more like a typical half blowback BB gun.

  • Sights are non adjustable.

Comments:

The Umarex T4E HK VP9 .43 Cal. Paintball Pistol is mechanically very close to the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol and the Umarex T4E S&W M&P9 M2.0 .43 Cal. Paintball Pistol in how it functions as a Paintball Pistol so I expect all of them to shoot very similarly and that’s not a bad thing since previous versions I have tested so far have performed rather well for me in the Replica Airguns Sea Can Indoor Shooting Range. If you are an HK fan then the Umarex T4E HK VP9 .43 Cal. Paintball Pistol is about as close as you are going to get in a Replica Paintball Pistol. Owning the paintball version will allow for a lot more opportunities to get some trigger time in and hone your shooting skill with a very similar gun to the one you my own, and at a fraction off the cot to 9mm ammo.

Categories: .43 cal, Blowback, CO2, Comparison, Paintball, Pistol, Review, Semi Auto, Vimeo Video Tags: Umarex, T4E, T4E HK VP9

Umarex T4E TR68 .68 Caliber Paintball Revolver Table Top Review

No Comments

Type: Paintball Gun.
Manufacturer: Umarex - T4E.
Model: T4E TR68
Materials: Metal & Polymer.
Weight: 773 grams (1.7 pounds).
Barrel: 6.5 inches (165mm) ,Smooth bore.
Total Length: 13 inches (331mm).
Power Source: 1x12 gram CO2.
Action: Revolver - Double action only trigger.
Ammo Type: .68 Caliber Paintball or Rubber Ball.
Ammo Capacity: 5 Rounds x 3 magazines.
FPS: 230-300.

Trigger Pull: The trigger pull on Umarex T4E TR68 .68 Caliber Paintball Revolver is double action only but not very long with a much smoother feel than the TR50, so maybe Umarex did some improving here. without any ammo in it the T4E TR68 trigger feels responsive for a double action trigger. We will have to see when I do my Field Test Shooting Video how it performs and if fully loaded up and primed, if it feels the same?

Accuracy: So far I have not had the opportunity to test the Umarex T4E TR68 .68 Caliber Paintball Revolver out, the only other similar product that may compare would be the Umarex T4E TR50 but I have a feeling both these guns will perform rather different since the ammo is a lot larger on the TR68. Also with the way the different triggers feel, I expect this to help with performance on the Umarex T4E TR68.

Build Quality: The build quality of the Umarex T4E TR68 .68 Caliber Paintball Revolver is good overall. It is a mostly plastic build with some metal parts where they need to be internally. It is essentially two plastic halves held together by small screws with few actual mechanical working external parts. You have the trigger with its working trigger safety, the removable magazine and magazine release and of course the quick puncture CO2 screw knob. The hammer is internal. The Umarex T4E TR68 .68 Caliber Paintball Revolver is not very heavy but it does feel really solid in the hand because of its very large size.

Realism: The Umarex T4E TR68 .68 Caliber Paintball Revolver is not really a replica per say of any real steel gun that I know of. It does share a lot of similarities with the Crosman Vigilante which is a CO2 BB/Pellet Revolver with its main design going back several decades. The Umarex T4E TR68 .68 Caliber Paintball Revolver looks similar to what a modern looking large caliber revolver such as a 357 or 44 magnum looks like. It is not going to fool anyone up close that you actually have a real steel revolver but then again I don’t think if you are shooting it at anyone they are going to want to get all that close to you :)

Pros:

  • Hoping to get a bit more raw energy out of the T4E TR.68 than the TR50 as it uses larger heavier ammo. (TR50 averaged 328 using rubber balls for reference).

  • Lots of mounting options for accessories like a tac light, laser or other sighting option with it’s upper and lower picatinny rail setup.

  • Quick CO2 pierce system so you can leave a CO2 in it ready to go any time with no worries about CO2 leaking out while in storage.

  • Working Trigger Safety.

  • White dot sights super easy to see on targets of varying colors and shades.

  • DOA Trigger feels pretty decent, not too long or heavy.

  • Comes with 3 total magazines you can preload ready for use.

  • Super non-complicated design. Once loaded with CO2 and Paintballs or Rubber Balls, all you need to do is hit the CO2 knob and then pull the trigger.

  • Build quality feels good, the gun is fairly beefy but not overly heavy.

  • Grip is normal size even thought the gun itself is fairly large.

Cons:

  • Mostly all plastic build.

  • Sights are not adjustable so hopefully it is well centered out of the box.

  • Do not expect a lot of shots per CO2. Will find out when I do my Field Test Shooting Review.

Comments:

The Umarex T4E TR68 .68 Caliber Paintball Revolver is an interesting Paintball gun, overseas versions are marketed as the HDR86 which stands for “Home Defense Revolver”, while the North American or Canada version is marketed as the TR68 for “Training Revolver”. This is mainly because in Europe most countries are not allowed to own real handguns but can own “Self Defense handguns”. In the US real handguns are very easy to obtain and can be used for self defense. Just across the border here in Canada we can not really purposely have on hand anything that we plan to use as a weapon for self defense so the Umarex T4E TR68 .68 Caliber Paintball Revolver, like the TR50 is marketed as a Training Revolver. What’s the difference? Not much, our North American 230+ fps version is a lot like the lower powered German versions in terms of power but you can also get more powerful versions in the UK. All that said, the Umarex T4E TR68 .68 Caliber Paintball Revolver at least here in Canada is made and marketed as a Training Paintball gun maybe not all that suitable on the field? What you decide to do with it is up to you.

Categories: .68 cal, CO2, Comparison, Paintball, Pistol, Revolver, Review, Vimeo Video Tags: Umarex, T4E, T4E TR68

Top Most Popular Replica Airgun Pistol Design Types

No Comments

This is not exclusive to Airguns since trends of Airguns are highly influenced by what type of Real Steel Pistols are popular to people. This is often based on what people see portrayed in movies and TV Series, and also promoted online. There is for sure an overlap in what is popular and it is hard to say what is influencing what? Is it the popularity of Pistols out in the real world that influences what we see being used in the movies and on TV? Or is it what we see in Movies and TV that influences our choices of pistols out in the real world? Perhaps it is a combination of both?

My list is based on my own personal experience and does not represent the entirety of types of Pistol designs available.

  • Glock

  • Sig Sauer

  • 1911

  • Beretta 92 / 84

  • S&W M&P

  • Makarov / Walther PPK

  • 357 / 44 Magnum / Colt Single Action Army

  • Desert Eagle

  • UZI

Buy Airguns in Canada

Buy Airguns in the US

Categories: .43 cal, .22 cal, 4.5mm / .177 cal, 6mm, 9mm, 380, Airsoft, BB, Blank Gun, Blowback, CO2, Comparison, Full Auto, Gas, GBB, Non Airguns, Pellet, Pistol, Paintball, Real Gun, Review, Revolver, Semi Auto, Vimeo Video Tags: Glock, Sig Sauer, 1911, Beretta, S&W M&P, Makarov, Tokarev, 357, 44 Magnum, Colt Single Action Army, Desert Eagle, UZI, Mini UZI

Cheap vs Expensive AEG Airsoft Rifle Shooting Comparison - Expensive

No Comments

Last week I individually tested out the Barra Black Ops M4 Viper MK5 and the Krytac LVOA-C AEG Airsoft Rifles here in the Replica Airguns Indoor Sea Can Shooting Range to see how well they would perform. I was very surprised at how closely they performed considering the Barra Black Ops is around a quarter of the cost of the Krytac LVOA-C.

My testing in the Indoor Sea Can is a bit limited in terms of range as I can only set a target to about 30 feet away given the limitations of my 40 foot Sea Cam. I really wanted to take both of these AEG Airsfot Rifles and test them out at much longer ranges to see if the much lower cost Barra Black Ops M4 Viper MK5 could compete with the Krytac LVOA-C Airsoft Rifle at 50 feet and 100 feet respectively. So that’s exactly what I did! I did use a bit heavier Airsoft BB’s (.28 gram) for the longer range outdoors and much windier shooting conditions but I do have to say it was a bit windy on my testing day which I am sure played a roll.

I did place a few pre-test shots downrange at my 100 foot target to get an idea of where I needed to place my aim point and this did help me a bit to get in the ball park but by no way was a bang on in terms of sighting in. Because of this I did have to make some on-the-fly adjustments as I tested but was able to get rounds on paper at 100 feet even with the wind gusts.

In this second video I test out the more expensive of the two AEG Airsoft Rifles, the Krytac LVOA-C AEG Airsoft Rifle to see how it compared to my previous Barra Black Ops M4 Viper MK5 test. I was a bit surprised at the results expecting the Krytac LVOA-C Airsoft Rifle to be the clearly superior option. As it turns out there was actually very little difference at least in term of accuracy out of the box. That said the Krytac LVOA-C had a much more responsive trigger with virtually no delay between pulling the trigger and actual BB’s being fired. This also makes full auto shooting a completely different experience as the Krytac LVOA-C rounds per minute is out of this world!

Categories: 6mm, AEG, Airsoft, Comparison, Field Test, Review, Rifle, Semi Auto, Vimeo Video Tags: Krytac, LVOA-C

Cheap vs Expensive AEG Airsoft Rifle Shooting Comparison - Cheap

No Comments

Last week I individually tested out the Barra Black Ops M4 Viper MK5 and the Krytac LVOA-C AEG Airsoft Rifles here in the Replica Airguns Indoor Sea Can Shooting Range to see how well they would perform. I was very surprised at how closely they performed considering the Barra Black Ops is around a quarter of the cost of the Krytac LVOA-C.

My testing in the Indoor Sea Can is a bit limited in terms of range as I can only set a target to about 30 feet away given the limitations of my 40 foot Sea Cam. I really wanted to take both of these AEG Airsfot Rifles and test them out at much longer ranges to see if the much lower cost Barra Black Ops M4 Viper MK5 could compete with the Krytac LVOA-C Airsoft Rifle at 50 feet and 100 feet respectively. So that’s exactly what I did! I did use a bit heavier Airsoft BB’s (.28 gram) for the longer range outdoors and much windier shooting conditions but I do have to say it was a bit windy on my testing day which I am sure played a roll.

I did place a few pre-test shots downrange at my 100 foot target to get an idea of where I needed to place my aim point and this did help me a bit to get in the ball park but by no way was a bang on in terms of sighting in. Because of this I did have to make some on-the-fly adjustments as I tested but was able to get rounds on paper at 100 feet even with the wind gusts.

In this first video I test out the cheaper option Barra Black Ops M4 Viper MK5 AEG Airsoft Rifle on its own, my next video will be exclusively the Krytac LVOA-C AEG Airsoft Rifle in which I will wrap up with my conclusion of both AEG Airsoft Rifles. I think you will be surprised at the results but you will have to wait a bit to find out!

Categories: 6mm, AEG, Airsoft, Comparison, Field Test, Review, Rifle, Semi Auto, Vimeo Video Tags: Krytac, LVOA-C, Black Ops M4 Viper MK5, Barra

ASG 1911 US-C CO2 Blowback BB Pistol Table Top Review.

No Comments

Type: Blowback CO2 BB Pistol.
Manufacturer: Distributed by ASG.
Model: 1911 US-C .
Materials: Mostly Metal.
Weight: 1.9 pounds (874 grams).
Total Length: 8.7 inches (220mm).
Barrel: 4.7 inches (119mm) metal non-rifled.
Propulsion: CO2 x 1.
Action: Semi auto blowback, SOA trigger.
Ammunition Type: .4.5mm steel BB’s.
Ammunition Capacity: 18 round drop out full size metal magazine.
FPS: Claimed 420.

Trigger Pull: The trigger pull on the ASG 1911 US-C CO2 Blowback BB Pistol is surprisingly really good as this is a new design mechanically different than the standard KWC 1911. There is a slide nozzle on the top of the magazine that pushes a BB into the breach area of the barrel and seals off the magazine for the barrel allowing for higher fps and I would imagine better CO2 efficiency. There are other Blowback Airguns that do this but most incorporate the trigger force to push the slide nozzle forward causing some friction and creating more of a double action trigger feel. I believe the ASG 1911 US-C CO2 Blowback BB Pistol uses the blowback action to engage this slide nozzle allowing for a true short and light single action trigger. Which the ASG 1911 US-C CO2 Blowback BB Pistol does have.

Accuracy: At this point I have not shot the ASG 1911 US-C CO2 Blowback BB Pistol or done my Field Test Performance Video. I really have no idea what to expect from it as this a new design I have never seen or shot before. I have high expectations based mainly on the advertised specifications but also from my observations looking over the mechanics and how this Airgun feels in the hand. Hopefully it performs as good as I am wishing for…

Build Quality: The ASG 1911 US-C CO2 Blowback BB Pistol has good fit and finish, I would compare it to a KWC 1911 in this department, I have a feeling it may be made in the KWC factory as the manual uses some of the same graphics found in most KWC manuals. I could be wrong here. That said the ASG 1911 US-C CO2 Blowback BB Pistol is mostly all metal with the exception of the pistol grips as expected.

Realism: The ASG 1911 US-C CO2 Blowback BB Pistol looks exactly like a real steel 1911 with the exception of an additional pin in the frame. The slide also does not cycle as much as a real steel 1911 or even like a standard KWC 1911 and field striping will not be done in the conventional manner since the slide catch release does not easily come out. All that said I feel like tis 1911 airgun design may be a nice compromise between performance and realism.

Pros:

  • Has that well liked KWC 1911 look but with different internals.

  • Looks to have a nice short and light single action only trigger.

  • Because of new type design I expect really good fps and lots of shots per CO2.

  • All working parts just like a real steel 1911.

  • Working safety and grip safety.

  • Full size drop out metal magazine that holds the CO2 and 18 rounds.

  • Integrated CO2 Allen key tool.

  • Recessed barrel for realism.

  • Blowback action for simulated recoil and a smoother trigger.

  • Good overall fit and finish.

Cons:

  • Painted markings on slide are a bit much.

  • Field strip is not conventional.

  • Sights are not adjustable.

Comments:

I am really optimistic that the ASG 1911 US-C CO2 Blowback BB Pistol will be a real winner here as it has a lot going for it! First of all it’s a 1911 and who doesn’t like a 1911? It is also a really solid replica on its own rights so it should check most boxes here with its blowback action, full size drop out metal magazine, nice SAO trigger and all metal build. On top of this all ,the specifications look really good with higher velocity than the standard KWC 1911 and I am also assuming better CO2 efficiency. Take all of this into account and the ASG 1911 US-C CO2 Blowback BB Pistol could be the new 1911 standard to go by.

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Comparison, Pistol, Review, Semi Auto, Vimeo Video Tags: ASG, ASG 1911 US-C

Reasons why Replica Airguns are Better than Real Guns

No Comments

Cost:

Airguns are generally cheaper to buy and for sure cheaper to shoot. Airguns can cost as little as $50-100 to buy while real guns in similar models will cost many time more. Cost of ammo is so much less expensive than Real Gun ammo by a mile!

Difficulty to Obtain:

Airguns in most countries do not require any licensing or registration. Generally there are more available options in Airgun choices than Real Gun choices as restrictions often prohibit many Real Guns to be obtained.

Places to Shoot:

Unless you live in a super remote locations and your laws allow you to shoot Real Guns in those locations, then in most cases you can shoot an Airgun almost anywhere within reason. You can even shoot certain Airgun models in your basement. Airsoft is a great option for indoor shooting as the plastic ammo does not carry very much energy so with minimal effort you can make a backstop that will trap the ammo very well.

Trigger Time:

Because ammo is much less expensive and places you can shoot are easier to find, you can get a lot more Trigger Time under your belt which will also improve your shotgun with Real Guns and after all it’s just fun to shoot guns even if they are Airguns.

Safety:

I am not talking about safety in terms of protection. I am talking about safety as in if you do something stupid and your Gun goes off accidentally. If you accidentally fire your Airgun indoors, the bullet will not travel through floors or walls and potentially harm or kill someone on the other side. If you do manage to shoot yourself with an Airgun, the consequence are much less severe than shooting yourself with a Real Gun. That said, always treat an Airgun as if it was a Real Loaded Gun, as server injury and even death can occur even with an Airgun.

Ware Games and Training Situations:

There is no way you can use a standard Real Gun to shoot at people, unless extensively altered with special parts that make the Real Gun unusable to shoot live ammo. With Airguns you have the choice of using an Airsoft or Paintball gun that are both designed specifically for this purpose.

Pest Control:

If you have the need for pest control in an urban area where you do not want a stray bullet to travel too far or penetrate buildings if a shot where to go awry, then an Airgun designed for accuracy and power may be perfect for the job. Accuracy with target and hunting Airguns is on par if not better than many Real Guns and are have powerful enough to kill a pest humanely without having too much power for the job and having to worry as much about your background.

Prop Guns:

As mentioned already, Airguns can look a lot like Real Guns, so they are perfect to be used as a stand-in or Prop Gun when you need to simulate the look and function of a Real Gun. Again they are easier and cheaper to obtain and if something does go wrong, the consequences are much less severe.

Social Stigma:

Unfortunately Real Guns and perhaps any gun these days are looked upon with a social stigma as being the cause of the Crime rather than a tool used in a Crime. And so people blame Guns for these crimes rather than the people committing these crimes. If a person is motivated enough to do something bad, they are going to do it either way and will use whatever means is available to them to commit these Crimes. Including other means like: Knives, Blunt Objects, Poisons, Vehicles, Explosives… Sad but true! Airguns are not used in homicides or mass shootings as they are completely underpowered for a crime like this. They can however be used in crimes as a show of threat, as they do look a lot like real guns, generally people that use Airguns for real crimes, if challenged will give up immediately as they are completely outgunned. Don’t bring an Airgun to a Real Gun fight, you have better chance with a knife!











Categories: Comparison, Gun Safety, Pistol, Real Gun, Rifle, Vimeo Video, .20 cal, .22 cal, .43 cal, .50 cal, .68 cal, 10mm, 380, 4.5mm / .177 cal, 6mm, 8mm, 9mm, AEG, Airsoft, BB, Blowback, Break Barrel, Bulk Air, CO2, Full Auto, Gas, GBB, Gun Law, Non Airguns, Paintball, PCP, Pellet, Pump, Q&A Video, Repeater, Revolver, Semi Auto, Single Shot, Spring Piston Tags:

Umarex Glock BB Airsoft Pellet Paintball Pistol Comparison

No Comments

In this Comparison Video I show several models of Glock Replica Airguns distributed under the Umarex/Glock license. Umarex has brought to market several Glock Replica Airguns to date including BB, Pellet, Airsoft and even Paintball versions in a variety of models. I showcase only a few of these models in this video but it is a good selection to give most people an idea of what is available from our Replica Airguns website in terms of Glock Pistols.

UMAREX GLOCK 19 GEN 3 CO2 NBB BB PISTOL ($110 CAN)

  • Type: BB Pistol.

  • Manufacturer: Distributed by Umarex.

  • Model: Glock 19.

  • Materials: Metal and polymer

  • Weight: 1.6lb g (726 grams).

  • Barrel: 3.5 in, metal, non-rifled.

  • Power Source: 12g CO2 x 1.

  • Action: Semi-auto, non-blowback, double action only.

  • Ammunition Type: 4.5mm steel BBs.

  • Ammunition Capacity: 16 round drop out metal stick magazine.

  • FPS: 410.

UMAREX GLOCK 19X CO2 BLOWBACK BB PISTOL ($170 CAN)

  • Type: BB Pistols

  • Manufacturer: Distributed by Umarex.

  • Model: Glock 19X.

  • Materials: Metal & Polymer.

  • Weight: 1.5 lb (662 grams).

  • Barrel: 3.36 in, metal, non-rifled.

  • Power Source: 12g CO2 x 1.

  • Action: Semi-auto, blowback, double action only.

  • Ammo Type: 4.5mm steel BBs.

  • Ammo Capacity: 18 round drop out full size metal magazine.

  • FPS: 360.

UMAREX GLOCK 17 GEN 4 CO2 BLOWBACK BB PISTOL ($190 CAN)

  • Type: BB Pistol.

  • Manufacturer: Distributed by Umarex.

  • Model: Glock 17 Gen 4.

  • Materials: Metal and polymer.

  • Weight: 1.7 lb (771 grams).

  • Barrel: 3.6 in, metal, non-rifled.

  • Power Source: 12g CO2 x 1

  • Action: Semi-Automatic, blowback, single action only.

  • Ammo Type: 4.5mm steel BBs.

  • Ammo Capacity: 18 round drop out full size metal magazine.

  • FPS: 370.

UMAREX GLOCK 17 GEN 5 CO2 BLOWBACK BELT-FED PELLET PISTOL ($165 CAN)

  • Type: Blowback CO2 Pellet Pistol.

  • Manufacturer: Distributed by Umarex.

  • Model: Glock 17 Gen 5.

  • Materials: Metal & Polymer.

  • Weight: 1.6 pounds (725 grams).

  • Barrel: .177 caliber, metal rifled.

  • Power Source: 12g CO2 x 1.

  • Action: Semi auto blowback, double action only.

  • Ammunition Type: .177 caliber pellets.

  • Ammunition Capacity: 21 round drop out full size metal magazine.

  • FPS: Claimed 370.

UMAREX GLOCK 19 GEN 3 GREEN GAS BLOWBACK AIRSOFT PISTOL ($275 CAN)

  • Type: Airsoft Pistols.

  • Manufacturer: Distributed by Umarex.

  • Materials: Metal & Polymer.

  • Weight: 1.64 Pounds (634 grams).

  • Barrel: 3.5 in, metal, non-rifled.

  • Power Source: Green Gas or Propane.

  • Action: Semi auto blowback, single action only trigger.

  • Ammunition Type: 6mm plastic Airsoft BB's.

  • Ammunition Capacity: 19 round drop out full size metal magazine.

  • FPS: Claimed 410 with .20 gram Airsoft BB’s. (Extended barrel)

UMAREX GLOCK 17 GEN 5 T4E CO2 BLOWBACK .43CAL PAINTBALL MARKER ($490 CAN)

  • Type: Paintball Marker.

  • Manufacturer: Distributed by Umarex.

  • Materials: Metal & Polymer.

  • Weight: 1.6 lbs (726 grams).

  • Barrel: 4.21 in, metal, non-rifled.

  • Power Source: 12g CO2 x 1.

  • Action: Semi auto blowback, single action only trigger.

  • Ammunition Type: .43 Caliber Paintball.

  • Ammunition Capacity: 8 round drop out full size metal magazine.

  • FPS: 350- 400 FPS.

Categories: .43 cal, 4.5mm / .177 cal, 6mm, Airsoft, BB, Blowback, CO2, Comparison, Gas, GBB, Paintball, Pellet, Pistol, Review, Semi Auto, Vimeo Video Tags: Glock, Glock 19X, Glock 17, Glock 19, T4E Glock, Umarex Glock, Gen 3, Gen 4, Gen 5

Arcturus AR06 - NY03CB AEG Airsoft Rifles Field Test Review

No Comments

In this Field Test Shooting Video I put the Arcturus AR06 - NY03CB AEG Airsoft Rifles through their paces to find out what the actual Velocity is and how Accurate they both are in both semi and full auto. I use .20 gram Airsoft BB’s for all of the test and I also use an 11.1 volt battery in each Airsoft Rifle. Make sure to checkout my combined Table Top Video for the Arcturus AR06 - NY03CB AEG Airsoft Rifles for more details and info.

Starting off with the velocity or fps for the Arcturus AR06 - NY03CB AEG Airsoft Rifles I place 4-5 rounds through my Chronograph and average the shots out to see what the fps is. Arcturus claims around 380-400 fps but I actually got a bit hotter velocities from both guns with the AR06 averaging 401 fps and the NY03CB averaging 412 fps. Both where supper consistent with their fps, about 2-3fps between the highest and lowest shots.

For my Accuracy Test I shot both the Arcturus AR06 - NY03CB AEG Airsoft Rifles in semi auto first using 10 rounds to find out what the groupings looked like at 30 feet away. I then switch both AEG Airsoft Guns over to full auto and dumped a spring load full form the high-cappa magazine into the paper target setup again at 30 feet down range to see if the groupings opened up much more. The Arcturus AR06 did place all 10 rounds right in about a 1 inch grouping just a tad low and ever so slightly to the left of the bullseye, while the Arcturus NY03CB again got close to the 1 inch grouping but had a few outliers that spread it out to closer to 2 inches, it may hav been me as human factor is for sure a possibility. The Arcturus NY03CB did shoot a little bit closer to the bullseye out of the box but both of these Arcturus AEG Airsoft Rifles have fully adjustable sights. When it came to full auto, both rifles groupings opened up a bit, but not much as the recoil on these AEG rifles is not really a factor.

As I mention in this video, there is a rather large price difference of around $200 extra for the Arcturus AR06 which does get you more metal and some upgrades internally but in the end they both performed about the same, so either choice would be good. I personally like the all metal and look of the Arcturus AR06 but if you want a similar performing AEG and save some money then grab the Arcturus NY03CB.

Categories: 6mm, AEG, Airsoft, Comparison, Field Test, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: Arcturus, AR06, NY03CB

KJWorks KP-13 CO2 Blowback Airsoft Pistol Table Top Review

No Comments

Type: Blowback CO2 Airsoft Pistol.
Manufacturer: Distributed by KJ Works.
Model: KP-13.
Materials: Metal & Polymer.
Weight: 1.7 pounds (770 grams).
Barrel: 3.7 inches (95mm) metal non-rifled.
Propulsion: CO2 x 1.
Action: Semi auto blowback, SOA trigger.
Ammunition Type: .6mm plastic Airsoft BB’s.
Ammunition Capacity: 24 round drop out full size metal magazine.
FPS: Claimed 366+.

Trigger Pull: The trigger pull on the KJ Works KP-13 CO2 Blowback Airsoft Pistol is what you would expect for a true Single Action Only Trigger which is nice and light. There is a bit of take up but you can feel the point near the back where the release kicks in which is extremely predictable with no play in it. Of course you will need to rack the slide in order to place a round in the breach and fire the first shot, after that the blowback action will do all the work for you.

Accuracy: At this point I have not shot the KJWorks KP-13 CO2 Blowback Airsoft Pistol or done my Field Test Performance Video. I would expect the KJWorks KP-13 to perform like the other KJWork Airsoft Pistols I have reviewed in the past, which generally hits the claimed fps. Keep in mind the claimed fps is with the extended barrel and I more than likely will be using the preinstalled shorter non extendable barrel which will have a slower fps for sure. Accuracy should be decent but we will find out when I make my Field Test Shooting video!

Build Quality: The KJWorks line of Airsoft Guns is know for overall good quality so I expect theKJ Works KP-13 CO2 Blowback Airsoft Pistol to be just the same. From my initial first impressions everything looks really good, fit and finish are excellent and as expected you will find metal parts and polymer parts in all the same places you would find them in a real steel modern semi auto pistol.

Realism: The KJ Works KP-13 CO2 Blowback Airsoft Pistol is not an exact replica of a specific semi auto pistol but yo could say it looks a little bit like a Glock ;) You need to be careful when it comes to Glock as they do not like it when companies copy their guns and rightly so. There is enough differences with the KJ Works KP-13 CO2 Blowback Airsoft Pistol so it should not set off any alarms over at Glock. I do like the two tone tan and black color scheme KJ Works went with for the KP-13 but if you like a more traditional look you can always go with the all black version.

Pros:

  • Metal and Polymer with decent weight and good feel to it.

  • Heavy Full blowback operation.

  • Excellent fit and finish as always with KJWorks pistols.

  • High capacity full size drop out metal magazine that holds the CO2 and 24 rounds.

  • Well hidden safety incorporated into the serial number under the barrel.

  • Working trigger safety.

  • Super easy to see in all conditions fiber optic sight up front.

  • All working components like a real steel Glock styled pistol.

  • Comes with extended barrel for higher velocity and easier import into Canada.

  • Would make a good training weapon if you are use to using Glocks.

  • Like the two tone finish, but can also get it in all black.

  • Easily field strip-able.

Cons:

  • Sights are not adjustable.

  • Would have liked the addition of white outline on the rear sight.

  • Slide spring could be slightly heavier.

Comments:

If you’re looking for a pistol that is similar to a Glock for training purposes but is unique in its own way and doesn’t have to be a Glock, then perhaps the KJ Works KP-13 CO2 Blowback Airsoft Pistol may be for you. I like the fact that it has its own style to it and is not just another Glock or Glock Copy. I also like that the KP-13 comes with a CO2 magazine rather than a Green Gas Magazine which will get you a bit higher velocity and more mag fills before requiring to gas up again. I personally like the two tone version but get what you like best, it’s good to have options!

Categories: 6mm, Airsoft, Blowback, CO2, Comparison, Pistol, Review, Semi Auto, Vimeo Video Tags: KJWorks, KP-13, Glock

Umarex Glock 17 Gen 5 CO2 Blowback Pellet Pistol Table Top Review

No Comments

Type: Blowback CO2 Pellet Pistol.
Manufacturer: Distributed by Umarex.
Model: Glock 17 Gen 5.
Materials: Metal & Polymer.
Weight: 1.6 pounds (725 grams).
Barrel: 4.5 inches metal non-rifled.
Propulsion: CO2 x 1.
Action: Semi auto blowback, DOA trigger.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 21 round drop out full size metal magazine.
FPS: Claimed 370.

Trigger Pull: The trigger pull on the Umarex Glock 17 Gen 5 CO2 Blowback Pellet Pistol is what I would describe as closer to a DOA (Double Action Only) trigger. The blowback action does retract the internal hammer/striker which does relieve some of the trigger pull but the trigger is also used to rotate the belt magazine which gives the trigger a kind of friction feel especially right at the end of the pull where the rotation occurs. That said it is not a terrible trigger like some other belt fed Airguns but it is certainly nutlike a standard SAO type Glock trigger.

Accuracy: At this point I have not shot the Umarex Glock 17 Gen 5 CO2 Blowback Pellet Pistol so I can only quote what Umarex is saying in terms of FP2 which is 370. That sounds a bit high for a pellet Airgun but they may be claiming this velocity using a light weight pellets perhaps made out of an alloy rather than lead? I guess we will find out the real world fps using lead pellets and also how accurate it will be when I do my Full Field Test Shooting Video.

Build Quality: The Umarex Glock 17 Gen 5 CO2 Blowback Pellet Pistol like most of the Umarex Glocks is very well made. I am thinking that Glock to allow Umarex to license Glock Pistols hammy have a quality control as part of this license agreement? Either way the Umarex Glock 17 Gen 5 CO2 Blowback Pellet Pistol is a solid and well built Airgun all around with quality material and very good fit and finish.

Realism: The Umarex Glock 17 Gen 5 CO2 Blowback Pellet Pistol in terms of realism as compared to a real steel Glock 19 Gen 5 for sure hits the mark in most categories. It is a bit lighter and you can not field strip it easily, there is also the not so much recessed barrel that is a bit of a giveaway but in terms of most other attributes the Umarex Glock 17 Gen 5 replicates a real Glock… Including the basic looks and feel, the metal slide and polymer frame, the full size drop out metal magazine, the blowback action and most of the working parts including the slide catch release, magazine release and trigger safety.

Pros:

  • Good weight and feel to it, build quality and fit and finish seem very good.

  • Really nice looking and full featured replica of the original Glock 17 Gen 5.

  • Fully Glock licensed via Umarex.

  • Easy to see white dot sights front and back.

  • Working trigger safety.

  • Accessory rail for adding a laser or tactical light.

  • Full size drop out metal magazine that holds the CO2 and .177 caliber pellets.

  • Nice high 21 round capacity.

  • Slide spring feels nice and heavy provide a decent blowback recoil effect.

  • Safety built into the serial number plate area keeps it well hidden.

  • Can see through ejection port when magazine is out.

  • Warning instruction are nice and discreet under trigger guard.

  • 370 claimed fps is good for a CO2 blowback pellet pistol.

Cons:

  • Barrel is not really all that recessed.

  • No way to easily field strip it.

  • Don’t like the clam shell packaging.

  • Trigger is a bit on the heavy side.

Comments:

I think many of us having been waiting for a pellet shooting version of the Glock from Umarex. I am a bit surprised they went with a belt fed version as belt fed magazines tend to be a bit on the heavy trigger pull side. Yes the Umarex Glock 17 Gen 5 CO2 Blowback Pellet Pistol has a stronger trigger pull as compared to a 4.5mm BB or 6mm Airsoft version of the same Umarex gun, as most of these Umarex based Glocks utilize a SAO trigger which is more comparable to a real steel Glock. On the plus side the Pellet version should be a bit more accurate, but we will see how this pans out when I do my comprehensive Field Test Shooting Video for the Umarex Glock 17 Gen 5 CO2 Blowback Pellet Pistol.

Categories: 4.5mm / .177 cal, CO2, Comparison, Pellet, Pistol, Review, Semi Auto, Vimeo Video Tags: Umarex, Glock, Glock 17, Gen 5

Arcturus AR06 - NY03CB AEG Airsoft Rifles Table Top Review

No Comments

Type: Airsoft Rifle.
Manufacturer: Acturus.
Model: AR06 & NY03CB.
Materials: Mostly all Metal.
Weight: 5.6/4.9 pounds (2.5/2.2 kilograms).
Length: 27.4-30.7/31.7-35 inches (695-780/805-890mm)
Barrel Length: 11/14.6 inch (280/370mm) inner 6.02mm tight bore non rifled.
Propulsion: AEG (with Deans Connectors).
Action: Semi & Full Auto SAO.
Ammunition Type: 6mm Airsoft BB's.
Ammunition Capacity: Hi Cap/Mid Cap - 550/135
FPS: 380-400fps.

Trigger Pull: The trigger pull on the Arcturus AR06 - NY03CB AEG Airsoft Rifles like other AEG Rifles is not mechanical as they are essentially electrical driven so basically the trigger is an on/off switch that is closest in feel to a single action only trigger since it is light and short. You will notice a slight delay between pressing the trigger and the actual round being fired since the trigger activates a motor which first pulls the air spring back. Once the spring is fully drawn back it releases and compresses the air which then propelled the 6mm Airsoft BB. The higher voltage battery you use like an 11.1 volt will shorten the delay as the motor will spin faster and pull back the spring quicker allowing for less noticeable delay and also a higher rate of full auto fire which in this rifle is very noticeable.

Accuracy: I have not Field Test Reviewed either the Arcturus AR06 - NY03CB AEG Airsoft Rifles or even tried them out yet. I hope to get to my Field Test Shooting Video for both of them later next week, until then we can assume they will shoot similar to most other AEG rifles with tighter bore barrels. I am expecting at least a 2 inch grouping at 30 feet down range in semi auto. In terms of velocity the test paper which they come with claims around 390+fps.

Build Quality: The Arcturus AR06 is a mostly metal with a full metal receiver while the NY03CB has a polymer or plastic receiver which from what I can tell only other components being plastic would be the pistol grips and rear stock. other metal parts on both AR type Airsoft Rifles would be the rail setup, the barrel, the charging handle, the buffer tube, the dust cover, the trigger, the selector switch, the magazine release and bolt release. Fit and finish for both guns is very good.

Realism: The Arcturus AR06 - NY03CB AEG Airsoft Rifles are based on the AR platform with both versions looking the part of a real steel AR. They do come with the removable orange tips installed but they also come with black flash hiders so you can easily switch them out adding to the realism. The metal receiver on the AR06 does give it a bit more weight but even the NY03CB has a decent weight and solid feel to it. Most of the controls work just like a real steel AR including the charging handle, bolt release, selector switch and magazine release.

Pros:

  • Two versions to meat your budget, both great options.

  • Quality components throughout both versions. Only real difference is nylon fiber receiver vs metal receiver and slight upgrade motor on AR06 version from Long Type to Long Type 19k torque motor on AR06.

  • Have been quality control inspected including 5 round recorded fps test with .20 gram Airsoft BB’s.

  • Both  have a functioning bolt catch.

  • Both come with Quick release two position fully adjustable pop-up sights.

  • Both come with additional black flash hiders.

  • Lots of rial mounting options in Picatinny and M-LOK.

  • 6 position adjustable rear stocks.

  • Easy access to motor for any possible trouble shooting you may need to do.

  • Additional grip plate option.

  • Ambidextrous controls and ambidextrous sling mounting points (QD on AR06).

  • Two magazines come with AR06 (Mid Cap and High Cap).

Cons:

  • Limited battery options as area is small.

  • Kind of need a tool to remove rear stock for battery access. (Could change the rear stock)

  • Mystery accessory baffles me and not mentioned in the manual.

Comments:

Like the AK series of Acturus AEG Airpot Rifles, the Arcturus AR06 - NY03CB AEG are good value for the money with the AR06 offering a slightly higher premium over the lower cost NY03CB. But don’t let the lower price fool you into thinking you are getting a sub-standard product as both versions are built with many of the same components. I personally like the more compact look of the Arcturus AR06 AEG Airsoft Rifle but then again the price of the NY03CB AEG Airsoft Rifle is hard to ignore. Either way you can’t go too wrong so make your pick and enjoy owning one of them.

My Table Top Video of the Acturus AR06 - NY03CB AR AEG Airsoft Rifles:

Categories: 6mm, AEG, Airsoft, Comparison, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: Acturus, Acturus AR06, AR06, Acturus NY03CB, NY03CB

Arcturus AEG Airsoft Intro Preview Unboxing Video Review

No Comments

In this Preview Unboxing Video I Take a look at 4 new Airsoft products from Arcturus all of them being AEG Airsoft Rifles with two based on the AK platform and the other two based on the AR platform. Three of the AEG Airsoft Rifles are mostly metal while I also feature a lower cost version with a Nylon Fiber Polymer receiver. All of these Replica AEG Airsoft Rifles are very good quality but you will get all metal (mostly steel and aluminum) build and a Hi-Cap and Mid-Cap magazine with the higher cost versions.

Arcturus AK05 AK AEG Airsoft Rifle:

  • Type: Airsoft AEG.

  • Manufacturer: Arcturus.

  • Caliber: 6mm plastic Airsoft BB's.

  • FPS Range: 380-400.

  • Magazine Capacity: 550rd Hi-Capacity and 30/135rd Mid-Capacity.

  • Thread Direction: 14mm Negative.

  • Gearbox: Version 3 Full Metal w/ Quick Change Spring, Fully Upgradeable.

  • Motor: Short Type.

  • Fire Modes: Semi/Full-Auto, Safety.

  • Battery: 9.6v Small Stick Type or 7.4v stick LiPo recommended.

  • Battery Location: Wired to dust cover with small Tamiya connector.

  • Hopup: Yes, Adjustable.

  • Inner Barrel: 280mm / 6.02mm.

  • Length: 790mm - 875mm, Adjustable.

  • Weight: 3730g.

  • Package Includes: Gun, Hi-Cap Magazine, Mid-Cap Magazine.

Arcturus AK06 AK AEG Airsoft Rifle:

  • Type: Airsoft AEG.

  • Manufacturer: Arcturus.

  • Caliber: 6mm plastic Airsoft BB's

  • FPS Range: 380-400.

  • Magazine Capacity: 550rd Hi-Capacity and 30,135rd Mid-Capacity.

  • Thread Direction: 14mm Negative.

  • Gearbox: Version 3 Full Metal w/ Quick Change Spring, Fully Upgradeable.

  • Motor: Short Type.

  • Fire Modes: Semi/Full-Auto, Safety.

  • Battery: 9.6v Small Stick Type or 7.4v stick LiPo recommended.

  • Battery Location: Wired to dust cover with small Tamiya connector.

  • Hopup: Yes, Adjustable.

  • Inner Barrel: 250mm / 6.02mm.

  • Length: 480mm, 695mm (Folded, Unfolded).

  • Weight: 2730g.

  • Package Includes: Gun, Hi-Cap Magazine, Mid-Cap Magazine.

Arcturus AR06 AR AEG Airsoft Rifle:

  • Type: Airsoft AEG.

  • Manufacturer: Arcturus.

  • Caliber: 6mm plastic Airsoft BB's

  • FPS Range: 380-400.

  • Magazine Capacity: 320rd Hi-Capacity and 130rd Mid-Capacity.

  • Thread Direction: 14mm Negative.

  • Gearbox: Version 2 w/ Quick Change Spring, Fully Upgradeable.

  • Motor: Long Type, 19k torque motor.

  • Fire Modes: Semi/Full-Auto, Safety.

  • Battery: 7.4v stick LiPo recommended.

  • Battery Location: Wired to buffer tube with small Tamiya connector.

  • Hopup: Yes, Adjustable.

  • Inner Barrel: 280mm / 6.02mm.

  • Length: 695mm - 780mm, Adjustable.

  • Weight: 2520g.

  • Package Includes: Gun, Hi-Cap Magazine, Mid-Cap Magazine.

Arcturus NY03CB AR AEG Airsoft Rifle:

  • Type: Airsoft AEG.

  • Manufacturer: Arcturus.

  • Caliber: 6mm plastic Airsoft BB's

  • FPS Range: 380-400.

  • Magazine Capacity: 330rd Hi-Capacity.

  • Thread Direction: 14mm Negative.

  • Gearbox: Version 2 Gearbox w/ Quick change spring system, Fully upgradeable.

  • Motor: Long Type.

  • Fire Modes: Semi/Full-Auto, Safety.

  • Battery: 7.4v stick LiPo recommended.

  • Battery Location: Wired to buffer tube w/ Deans Connector.

  • Hopup: Yes, Adjustable.

  • Inner Barrel: 370mm~ / 6.02mm.

  • Length: 805mm - 890mm, Adjustable.

  • Weight: 2020g.

  • Package Includes: Gun, Hi-Cap Magazine.

Categories: 6mm, AEG, Airsoft, Comparison, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: AK05, AK06, AR06, NY03CB, AK-47, Kalashnikov AK47, AR15, M4 Carbine, Acturus

KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol Table Top Review

No Comments

Type: Airsoft Pistol.
Manufacturer: KWC.
Model: DE L6 Desert Eagle.
Materials: Metal & plastic.
Weight: 2.5 pounds (1100 grams).
Barrel Length: 5.1 inches (Smooth bore).
Total Length: 10.75 inches.
Propulsion: CO2.
Action: Blowback semi & full auto, single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 21 rounds.
FPS: 360fps claimed.

Trigger Pull: The trigger pull on the KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol is single action only which means you will need to rack the slide to not only draw the hammer back but to also chamber the first round. After that the blowback action will do this for you until you are out of ammo and then the slide will lock back. You can also manually draw the hammer back if a round is already chambered. The trigger itself is really nice, it’s light, super short with a crisp light release perfect for fast action shooting.

Accuracy: At this point I have not made my Field Test Shooting portion of my review for the KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol so I really don’t know what to expect? KWC claims an fps of 360 using CO2 as its power source and it is a realistic velocity based on previous Velocity tests with similar KWC Airsoft Guns. In terms of accuracy, again I have no idea since I have not reviewed this version of Desert Eagle before. So stay posted till next week when I make the Field Test Shooting Review for it.

Build Quality: Overall the metal and plastic build quality of the KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol is good. It is mostly metal with a plastic frame, the real steel version would have an aluminum frame and has a weight closer to 4 pounds total so a bit lighter in terms of weight compared to the powder burning version. The fit and finishes look good.

Realism: The KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol is an excellent Replica Airsoft version of the real steel L6 Desert Eagle including the top and bottom rails and the ported front barrel. It also has full blowback action and you can fully field strip it. I like the addition of the fingered grips which I think adds ot the overall looks and function of this Airsoft Pistol.

Pros:

  • Lots of metal and good overall weight to it.

  • Very accurate replica of Desert Eagle L6.

  • Ergonomic rubberized grips.

  • Semi and full auto selectable.

  • Adjustable hop-up.

  • No orange tip.

  • CO2 for more power over GBB.

  • Uses standard KWC CO2 Desert Eagle magazines.

  • Picatinny rail top and bottom for lots of accessory mounting options.

  • Great light weight single action only trigger with super short take-up.

Cons:

  • Frame is plastic so compared to real steel version is much lighter.

  • Non adjustable sights, also all black so may be hard to see on darker targets.

  • No trademarks since non-licensed version via KWC direct.

  • Very large gun with large grips so not suitable for smaller handed shooters.

Comments:
Going off just the looks and feel for the KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol I can say for sure I do like it compared ot the standard KWC Desert Eagle with its venting up front and its ergonomic rubberized grips. I hope when I perform the Field Test Shooting Video fo fit it it performs well as the price point is good at around $200 Canadian and who doesn't want to have a Desert Eagle in their Replica Airgun collection at the end of the day!

My Table Top Video of the KWC DE L6 Desert Eagle CO2 Blowback Full Auto Airsoft Pistol:

Categories: 6mm, Airsoft, Blowback, CO2, Comparison, Full Auto, Pistol, Review, Semi Auto, Vimeo Video Tags: KWC, Desert Eagle, Desert Eagle L6

Where Have I Been Update?

No Comments

This video is primarily for my viewers over on the Replica Airguns channels as I have not posted anything about what's been going on with me the last month and a bit. My Airgun channel does not have very much personal content like my GetFitOver40 channel does, so I wanted to fill them in on where I have been and what's been going on.

In this video I talk about being in the hospital for a month because I was experiencing shortness of breath and a feeling of pressure in my diaphragm area which was later found out to be a heart problem.

Unknown to me I had been born with a Congenital Heart Defect where my Aortic Valve was defective which over time had cause the Aortic Root area to double in size (3cm normal to 6cm).

This defect caused my heart to work a lot harder then normal making it enlarge over time which is not good and reduces it's pumping ability. Before my operation my heart function was below 20%, a normal healthy heart is around 60%.

While in the hospital I had open heart surgery on my Aortic valve replacing it along with a section above it. I also had a Pacemaker/Defibrillator put in. There where a lot of concerns because my heart was also enlarged and not functioning that well, the doctor even said they may not be able to get me off of bypass which would then require an emergency heart transplant. The good news is the operation went well and no need for a new heart at least for now...

I was in the hospital for longer than normal because of my enlarged heart and because of all the stress to it. I was in and out of what's called Atrial Fibrillation. This is when the heart beats very irregularly and faster than normal. It can be short term or longer term and can sort itself out or require intervention to help get back to a Sinus Rhythm. At the time of this post I believe it has gone back to the normal Sinus Rhythm, so fingers crossed it stays this way.

As you can imagine, this has been a life changing event and means my lifestyle will be changing a bit. I will not be doing anything to overstress my heart but that does not mean no more fitness for me, just a different fitness approach. Perhaps a more scaled back approach but I am always up for a challenge and this is no different in terms of how I would approach any challenge in my life.

So if you are a Replica Airguns follower and want to follow my "Road to Recovery" you can do that over on my GetFitOver40 channels. Other than that I will be making regular Airgun Videos moving forward now that I am at home.

Categories: Non Airguns, Replica Airguns News, Vimeo Video Tags:

KWC 24/7 TAC Non-Blowback CO2 Pellet Pistol Table Top Review

No Comments

Type: Pellet Air Pistol.
Distributer: KWC.
Model: KWC 24/7 TAC NBB Pellet.
Materials: Metal and polymer build.
Weight: 1.76 pounds (799 grams).
Barrel: Rifled steel.
Propulsion: CO2 x1.
Action: Semi auto non-blowback, double action only.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 16 rounds (2x8).
FPS: 360-370.

Trigger Pull: The trigger pull on the KWC 24/7 TAC Non-Blowback CO2 Pellet Pistol is a bit on the medium to heavy side so it’s not going to make for the best action shooter as it is a double action only shooter when compared to a single action only trigger or a single and double action trigger. As with most double action triggers it is a bit longer and slightly heavy but not unusable, just be prepared to get a little bit of a finger workout.

Accuracy: I have not shot the KWC 24/7 TAC Non-Blowback CO2 Pellet Pistol just yet but will be doing so probably next week so stay posted for my Full Field Test Shooting Video for the KWC 24/7 TAC Non-Blowback CO2 Pellet Pistol. I expect it to perform well in terms of accuracy and power since there is no blowback operation to have to compensate for. Having a rifled barrel should also help with accuracy! We will see shortly.

Build Quality: The KWC 24/7 TAC Non-Blowback CO2 Pellet Pistol is built as expected just like all the other KWC Airguns. KWC has been making Airguns for a while not just for themselves but for other companies like Umarex, Gletcher, ASG, Crosman and even Sig Sauer and so quality control and durability have to stand up to these manufacturers standards. You will find metal on this gun where it matter. The slide, the full size drop out metal magazine and of course lots of internal parts. The frame, magazine release, trigger and safety are all plastic. I do like the feel of the rubberized grips for sure! Fit and finish is good overall and the fact that this is a fairly simple Airgun design with no blowback action or even a moving slide, so less moving parts means there is less chance for something to go wrong so it should last a while even with a fair amount of use.

Realism: The KWC 24/7 TAC Non-Blowback CO2 Pellet Pistol shares it’s looks with the Taurus 24/7 but is not an exact replica. The trigger guard is a bit different and so is the placement of the controls and even the slide and frame are not exact but very similar. In terms of size, weight and vernal overall design for sure the KWC 24/7 TAC Non-Blowback CO2 Pellet Pistol looks a lot like a Real Steel Taurus 24/7 at first glance.

Available at the: Replica Airguns Store

Pros:

  • Good weight and solid feeling gun. Lots of metal where you need it in the slide, magazine and other internals.

  • All metal full size drop out magazine holds CO2 and 16 pellets.

  • Decent looking replica (but not bang on) of a Taurus 24/7.

  • Not a lot of writing on the gun, very clean looking (Non Ranger version).

  • Recessed barrel helps with look of realism.

  • Fiber Optic front and back sights for easy sight acquisition.

  • Rifled barrel will help with accuracy.

  • Non-blowback operation with increased fps and CO2 efficiency.

  • Rail on top of slide and frame for lots of accessory add on options.

  • Double action trigger is long but not overly heavy so should be OK for action shooting.

Cons:

  • No blowback, slide is fixed and does not move but can be removed with a tool for internal access and cleaning.

  • No single action shooting so may not be the most accurate for slowed down shooting.

  • Sights are not adjustable but you can add an adjustable red dot to it using the rail setup.

  • Hard to tell when out of ammo, have to listen to the sound or count shots.

Comments:

It is nice to see more full size drop out metal magazine Replica Pellet Pistols coming out in the Airgun market just liek the KWC Makarov PM I just reviewed. Generally speaking most are going to be non-blowback but there are a few blowback options. That said a Non-blowback CO2 Pellet Pistol like the KWC 24/7 TAC Non-Blowback CO2 Pellet Pistol will typically give you a high velocity and more shots per CO2 and can even be a little bit better in the accuracy department since there is virtually no recoil from them. The KWC 24/7 TAC Non-Blowback CO2 Pellet Pistol is a nice little Taurus 24/7 looking Airgun that has a nice modern look and feel to it. Hopefully it performs well for me during my Field Test Shooting Video I will be making soon for it.

My Vimeo Videos for the KWC 24/7 TAC Non-Blowback CO2 Pellet Pistol:

Categories: 4.5mm / .177 cal, CO2, Comparison, Pellet, Pistol, Review, Semi Auto, Vimeo Video Tags: KWC, Ranger 24/7, Taurus PT24 24/7, 24/7 TAC

Umarex Stainless Limited Edition Ruger Mark IV Break Barrel .177 Cal Pellet Pistol Table Top Review

No Comments

Type: Pellet Pistol.
Distributer: Umarex.
Model: Stainless Ruger Mark IV.
Materials: Metal and polymer build.
Weight: 1.56 pounds (708 grams).
Barrel: 5.3 inches (135mm).
Total Length: 11 inches (279mm).
Propulsion: Spring Piston.
Action: SAO Break Barrel.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 1 round.
FPS: 320.

Trigger Pull: The trigger pull on the Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol is not too bad, I feel it is a around 6-7 pounds or so without measuring. In comparison to a real steel 22LR semi auto SAO trigger pistol, the trigger is much heavier but most of these 22LR pistols of this nature have what I would consider to be near perfect triggers. Over time once you get use to the pressure and release point accuracy with this pistol it is for sure possible.

Accuracy: I have tested out the all black version of this pistol which will perform exactly the same or should I say is expected to perform the same since they are virtually the exact same Pellet Pistol but in different finishes. You can watch my Field Test Shooting Video for the all black version but in case you don’t make it there I will fill you in on the basic results… In terms of velocity I averaged 312 fps using 7 grain lead pellets and got around a 2 inch 7 rounds grouping but expect with a bit more trigger time to get closer to 1 inch.

Build Quality: The Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol is a low cost target plinker that also doubles as a licensed Replica for that coolness factor so you won’t get an all metal super top quality build here. That said metal and plastics are well used and for sure details in the fit and finish have been improved over the Buck Mark URX version where I found the barrel felt a bit sloppy and the trigger was plastic. The Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol has a much tighter barrel fit when closed and the trigger is now metal! Maybe Umarex watched my video back in the day and took some notes?

Realism: The Umarex Ruger Mark IV Break Barrel .177 Cal Pellet Pistol most resembles the Mark IV Hunter edition and is pretty much bang on in terms of being a replica other than the tell tail hinge just under the barrel required for a spring piston design, there really is no way to get around this so I’m not going to criticize this minor difference. The real steel version is almost 3 pounds and so the pellet shooting version is a bit under weight so it would have been to have had more metal perhaps in the barrel and lower frame. Again since the pellet shooting version is a springer you will not have any working bolts or slide catches or a built in magazine.

Pros:

  • It's a decent Ruger Mark IV Replica!

  • Feels well built overall.

  • Expect it to have really good accuracy like the Umarex Browning Buck Mark URX since they share similar mechanical design.

  • Barrel locks into place much better than the Umarex Browning Buck Mark URX did.

  • Fully adjustable rear sight with fiber optic front sight.

  • Auto locking safety, just don’t forget to unlock before each shot

  • Actual metal trigger in this version.

  • Nice and compact, not too heavy.

  • Full Ruger licensed via Umarex.

  • Fairly low price tag.

Cons:

  • No built in rail for a sight system like the Umarex Browning Buck Mark URX.

  • Would have liked a metal trigger and maybe a slightly lighter trigger pull to match the real Buck Mark's very light trigger pull.

  • A bit more metal would have been nice.

  • Significantly more expensive than the black version which is the same exact gun in a different color.

Comments:
The Stainless Ruger Mark IV Break Barrel .177 Cal Pellet Pistol is a decent looking replica and a decent pellet shooting target pistol and if you own the real steel version in 22LR you may just want to get your hands on one of these Break Barrel Replica Pellet shooters. The only real question is do you get the Stainless version with simulated wood grips or the all black version? If you like the look of the stainless version and don’t care about money whatsoever, then pickup that one up since it is a Limited Edition version that will only go up in value over time. If you are on a budget and don’t mind the look of the all black versions or maybe even prefer it then by all means grab one since at the end of the day they will both perform exactly the same.

Categories: 4.5mm / .177 cal, Break Barrel, Comparison, Pellet, Pistol, Review, Single Shot, Spring Piston, Vimeo Video Tags: Umarex, Ruger, Ruger Mark IV

Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol Table Top Review

No Comments

Type: Airsoft pistol.
Distributer: Umarex.
Model: Smith & Wesson M&P 9L.
Materials: Metal and polymer build.
Weight: 1.7 pounds (757 grams).
Barrel: 4.75 inches (121mm), non-rifled.
Total Length: 8.5 inches (215mm).
Propulsion: CO2 x1.
Action: Semi auto blowback, single action only
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 15 rounds.
FPS: 410 Claimed.

Trigger Pull: The trigger pull on the Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol is fairly light weight being a single action only trigger. There is about a quarter inch of take up with an easy release that is not hitchy at all. You will need to rack the slide to load your first Airsoft BB into the breach and engage the action but on the first shot but then the blowback action does this for you until the Airsoft Pistol is out of ammo and the slide locks back.

Accuracy: I have not performed my Field Test Shooting Video for the Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol so stay posted for that video coming out in the next couple of weeks. Umarex has claimed a velocity of around 410 FPS using .20 gram Airsoft BB’s but that does seem a bit quick, well will have to see when I place some shots though my Chronograph! In terms of accuracy I expect it to shoot about the same as most Full Blowback Airsoft Pistols which generally produces a 1.5 to 2 inch 10 shot grouping from 30 feet out using a semi rested shooting position. Again we will find out when I perform my Field Test Shooting Video for the Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol.

Build Quality: The Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol build quality is fairly decent, fit and finish looks good with not too much slide wiggle and the materials used are both metal and plastic or polymer that look to be good quality. I do expect some of the black finishes ot come off on the high spots as these guns are generally electroplated and not too thick with it but this can actually make the gun look more realistic with that slightly worn in look to it.

Realism: The Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol in terms of looking like the real steel version of its counterpart is very close for sure, it would be hard to tell without really taking a close look t it. Everything about this Replica Pistol works for the most part like the real steel version including most of the mechanical parts like the slide catch release, magazine release, take down lever, trigger safety and you can even fully field strip it which gives you easy access to the hopup on the barrel. Of course the full blowback action really seals the deal in terms of making this gun shoot like a real semi auto pistol.

Pros:

  • Very accurate replica of the S&W M&P 9L.

  • Fairly accurate weight and feel to it.

  • Metal and plastic parts where you find them on the real steel version, fit and finish is good.

  • Working trigger safety and ambidextrous working slide catch release.

  • Full size dropout metal magazine that holds Airsoft BB's and CO2.

  • Warning instructions are discreet under the trigger guard.

  • Recessed barrel and hidden CO2 screw for more realistic look

  • Fully Smith & Wesson licensed via Umarex.

  • Rail for add on accessories.

  • White dot sights for easy target acquisition.

  • Comes with three sizes of interchangeable grips S/M/L.

  • Adjustable hopup so you can at least adjust elevation at range.

  • Comes in a box rather than a clamshell.

Cons:

  • Has an orange tip but could be painted black or silver to match.

  • Sight are not adjustable.

  • 15 round magazine has less capacity than some other blowback Airsoft Pistols.

Comments:
The Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol is a nice addition to the Smith & Wesson M&P line of Replica Airguns. I’m glad they made it in full blowback but being Airsoft based that is generally the way they lean towards. Hopefully we get to see 4.5mm Steel BB version too in the future! For now we have it in Airsoft and with the longer barrel perhaps it will shoot a bit hotter than most of the other CO2 Blowback Airsoft Pistols, maybe even 410fps like Umarex claims but I will be surprised if it does. I will be happy to see something in the high 300’s to be honest. No matter what, you now have yet another Smith & Wesson option to consider when looking for your ultimate Replica Airgun!

My Vimeo Videos for the Umarex S&W M&P 9L Blowback CO2 Airsoft Pistol

Categories: Comparison, Pistol, Vimeo Video, Semi Auto, Review, CO2, Blowback, Airsoft Tags: Umarex, Smith & Wesson, M&P 9L, S&W M&P

Umarex HK MP7 .177 Cal Break Barrel Pellet Gun Table Top Review

No Comments

Type: Pellet Rifle.
Manufacturer: Umarex
Model: HK MP7 .177.
Materials: Metal and Polymer.
Weight: 4.4 pounds (2kg).
Barrel: 11.7 inches (29.7cm).
Total Length: 31 inches (78.7cm).
Propulsion: Break Barrel Spring Piston.
Action: Single Action Single Shot.
Ammunition Type: .177 Caliber Pellets.
Ammunition Capacity: 1.
Max FPS: 490 Claimed.

Trigger Pull: The trigger on the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is single action only requiring you to break the barrel and compress the internal spring piston before you can shoot it. The actual trigger pull is pretty decent overall. There is very little take-up but the creep is on the longer side but fairly smooth requiring medium pressure. The release is a bit hard at first to predict but nothing some trigger time can’t get you use to.

Accuracy: I have not performed any shooting tests with the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun so far. I hope to make that Video Review next week. I expect the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun to perform well in the accuracy department especially with the included Red Dot Optical Scope installed. I hope the velocity rating from Umarex is based on lead pellets and not hyper velocity light weight pellets but we will find out the story when I perform my Field Test Shooting Video shortly!

Build Quality: The Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is a China made Airgun but looks to be well made. It has lots of metal parts as you would expect from a Spring Piston Rifle which adds a nice weight and feel to it. I did however have an issue with the front plastic mock Suppressor/Compensator as it does not seem to be attached to the metal barrel very well other than being pressure fit which is not going to cut it with all the vibration a spring piston system makes. My first shot loosened the mock Suppressor/Compensator so I will either have to hold it when shooting or find another way to make sure it stays in place.

Realism: The Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is kind of unique in this department as most break barrel rifles are not Replicas, especially the more compact sub machine gun styled ones. Umarex did good job making the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun look like a real HK MP7 for the most part. Of course it is a Spring Piston Rifle at its core so exceptions had to be made to make this work including molded non working parts like the magazine release, sector switch and, bolt/ejection port. That said all in all it is a decent looking replica considering it is a Break Barrel Airgun under the skin.

Pros:

  • Not many Replica Pellet Rifles on the market, especially in a more compact gun.

  • Comes with Red Dot sight.

  • Lots of rails for adding accessories to it.

  • Full HK Licensed by Umarex.

  • Collapsible Wire Stock.

  • Nice high claimed 490 fps.

  • No need for CO2 so low cost to cooperate.

  • Not effected by temperature like a CO2 Airgun.

  • Should have better accuracy than most BB Replica Airguns.

  • Very solid feel to it, good overall weight and feel.

Cons:

  • Not going to be an action shooter, have to reload after each shot.

  • A good overall Replica but not as Realistic or full operation as a BB version would be.

  • Mock Suppressor/Compensator poorly attached to barrel.

Comments:
The Umarex HK MP7 .177 Cal Break Barrel Pellet Gun is an interesting product, on one hadn't it is a Replica Airgun and most people expect a Replica Airgun to have all of the appropriate working parts similar to what would be found on the real steel version. But since this is a Break Barrel Airgun at the core the Umarex HK MP7 .177 Cal Break Barrel Pellet Gun will not function the same as the Real Steel version so as long as you don’t expect it to and appreciate the fact that it should be a nice accurate low cost to operate target rifle then I think you will understand this product and enjoy it for what it is… A Single Shot Pellet Rifle that looks a lot like a HK MP7.

Categories: 4.5mm / .177 cal, Break Barrel, Comparison, Pellet, Pistol, Review, Rifle, Single Shot, Spring Piston, Vimeo Video Tags: Umarex, HK MP7