This video is primarily for my viewers over on the Replica Airguns channels as I have not posted anything about what's been going on with me the last month and a bit. My Airgun channel does not have very much personal content like my GetFitOver40 channel does, so I wanted to fill them in on where I have been and what's been going on.

In this video I talk about being in the hospital for a month because I was experiencing shortness of breath and a feeling of pressure in my diaphragm area which was later found out to be a heart problem.

Unknown to me I had been born with a Congenital Heart Defect where my Aortic Valve was defective which over time had cause the Aortic Root area to double in size (3cm normal to 6cm).

This defect caused my heart to work a lot harder then normal making it enlarge over time which is not good and reduces it's pumping ability. Before my operation my heart function was below 20%, a normal healthy heart is around 60%.

While in the hospital I had open heart surgery on my Aortic valve replacing it along with a section above it. I also had a Pacemaker/Defibrillator put in. There where a lot of concerns because my heart was also enlarged and not functioning that well, the doctor even said they may not be able to get me off of bypass which would then require an emergency heart transplant. The good news is the operation went well and no need for a new heart at least for now...

I was in the hospital for longer than normal because of my enlarged heart and because of all the stress to it. I was in and out of what's called Atrial Fibrillation. This is when the heart beats very irregularly and faster than normal. It can be short term or longer term and can sort itself out or require intervention to help get back to a Sinus Rhythm. At the time of this post I believe it has gone back to the normal Sinus Rhythm, so fingers crossed it stays this way.

As you can imagine, this has been a life changing event and means my lifestyle will be changing a bit. I will not be doing anything to overstress my heart but that does not mean no more fitness for me, just a different fitness approach. Perhaps a more scaled back approach but I am always up for a challenge and this is no different in terms of how I would approach any challenge in my life.

So if you are a Replica Airguns follower and want to follow my "Road to Recovery" you can do that over on my GetFitOver40 channels. Other than that I will be making regular Airgun Videos moving forward now that I am at home.

Different Types of Airgun Sights

View fullsize

Sights for guns in general are the same for Airguns as is with real steel guns for the most part and can be mixed and matched with a couple of exceptions. Spring piston rifles for instance are an exception because of the unique vibration the spring makes and how it can damage a standard optical sight, so in this case you’re best to use an optical sight designed for a spring piston Airgun. In most other cases sights can be used on all types of guns.

In this Airgun Sights video I will go over the various types of sights that either come as part of the gun design or can be added afterwards using a rail or mounting system.

Types of Airgun Sights most commonly used.

View fullsize

Iron Sight (Fixed or removable).

Iron Sight (Adjustable).

Iron Sight (White Dot, Fiber Optic).

Come in Post/Notch, Post/Aperture (Peep).

Common on Pistols and Rifles

View fullsize

Laser Sight:

Generally added to a rail or can sometime be integrated into the design of the gun.

Common on both Pistols and Rifles.

View fullsize

Red Dot and Holographic:

Generally not magnified.

Most common on Rifles but can be used on Pistols.

View fullsize

Optical Magnified (Telescopic)

Come in a variety of magnifications for different shooting ranges.

Generally for Rifles but can be used on Pistols.

There are many types of magazines used in Airguns and some of this is dependent on the ammunition used.

For instance a stacked type of magazine often used for Steel BB and Airsoft can not be used for Pellets as pellets tend to deform when stacked in such a way since there is no metal casting protecting them from mashing into each other.

So what type of magazines do we generally see in Airguns? The most common Airgun magazines are as follows:

Simple Stick Magazine

• Mostly used with Steel BB but also found in some Airsoft Airguns.

• Some Pellet Airguns use a type of stick magazine with a rotary magazine on each end.

• Used in non-blowback and blowback Airguns.

• Can be made from plastic or steel or a combination of both materials.

Full Size Drop Out Magazine

• Used with Steel BB and Airsoft guns.

• Generally you will find these types magazines hold both the BB’s and CO2.

• Used in non-blowback and blowback Airguns.

• Commonly used with Airsoft Rifles in mid to high capacity.

• Can be made from plastic or steel or a combination of both materials.

Rotary magazine

• Used with Steel BB, Airsoft and Pellet Airguns.

• Used in non-blowback and blowback Airguns.

• Can be made from plastic or steel.

• Can often use mixed ammo types as in both 4.5mm Steel BB and .177 caliber pellet.

Belt Fed Magazine

• Like rotary magazine belt fed magazine can accommodate Steel BB, Pellet and Airsoft but are most often used with Pellet Airguns.

• Usually found in a full size magazine that also holds the CO2.

• Used in non-blowback and blowback Airguns.

• Can be made from plastic or steel or a combination of both materials.

Internal Magazine

• Used with Steel BB, Airsoft.

• Can have a hopper built in hat feeds a spring fed magazine.

• Usually found in lesser expensive Airguns but not a rule.

In this Video I go through each type of Airgun Magazine and talk about their differences and uses.

The Video I am sure most of you have been waiting for in this Full Auto Fun 2022 Video Series! The Canada Legal Air Ordnance SMG .22 Full Auto PCP Machine Gun. For this video I loaded up a 100 round belt fed magazine and filled my 13 CU PCP tank up to 3500 PCI (I should have filled it all the way to 3000 in hind sight!) I was able to get through almost all the of the 100 rounds but ran out of pressure with around 100 or so rounds left. Still had lots of .22 caliber lead pellets to get the job done and rip through all the water filled cans with lots left over for the Gel fill paper target. Make sure to watch Video 1 where I shot the Crosman A4-P Co2 Full Auto Machine Pistol and Video 2 where I shoot another Corman BB Machine Gun the AK1 Full Auto CO2 BB Rifle.

• Buy the Air Ordnance SMG .22 Full Auto Machine Gun in Canada

• Buy the Air Ordnance SMG .22 Full Auto Machine Gun in the US

In this Replica Airguns Video I talk about the latest Canadian Temporary Handgun Ban What it Means for Airguns. I talk about what I think abut it and what it means for Replica Airguns now and in the future.

Canada puts in place temporary handgun import ban!

From: Global Affairs Canada

News release

August 05, 2022 - Toronto, Ontario - Global Affairs Canada

Canadians deserve to feel safe in their communities. That is why the Government of Canada has a comprehensive plan that gets firearms off our streets and more

resources into our communities. A central part of this is the recently introduced Bill C21. The bill addresses the alarming role of guns in gender based violence, gets tough on organized crime and most significantly introduces a national freeze on the sale,

transfer and ownership of handguns, anywhere in Canada.

The Honourable Mélanie Joly, Minister of Foreign Affairs, and the Honourable Marco Mendicino, Minister of Public Safety, today announced a temporary import ban on the importation of restricted handguns. This will help bring the ultimate impact of the national handgun freeze into force sooner. This temporary ban means that individuals and businesses will no longer be able to import handguns into Canada, subject to narrow exceptions that mirror those in Bill C-21. These restrictions will take effect on

August 19th, 2022, and will last until the national freeze comes into force. No single program or initiative can tackle the challenge of gun violence on its own. That is why Bill C-21 and the national freeze on handguns are two of the many elements in the Government’s comprehensive plan to keep Canadians safe. This begins at our borders, where we’ve added resources to fight smuggling and stop guns from coming into Canada. We’re also investing in prevention programs to tackle the root causes of gun crime and stop it before it starts. Finally, we banned assault-style weapons like AR15s, and will soon begin a buyback program to get these weapons of war out of our communities once and for all.

Quotes

“We know that one Canadian killed by gun violence is one too many. As a government, it is our duty to ensure that Canada remains one of the safest places to live in the world. The import ban announced today will help to keep guns stay off our streets as we work towards implementing Bill C-21, reducing gun violence in the immediate term.

- Mélanie Joly, Minister of Foreign Affairs

“My top priority as Minister is keeping Canadians safe in their communities. Today’s announcement is further proof that we are using all tools at our disposal to fight gun crime in this country. It is a key pillar of our plan to address it, along with investments in prevention, action at our borders, a ban on assault-style weapons and Bill C-21 –Canada’s most significant action on gun violence in a generation.”

- Marco Mendicino, Minister of Public Safety

View fullsize

In this Field Test Shooting Video I go outside for a bit of a change and test out the Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle Combo to see what the real world velocity is and what kind of accuracy I can expect shooting at much further out ranges than my Sea Can Airgun Range offers me. If you want to know more about specifications and details for this Break Barrel Spring Piston Air Riffle make sure to watch my Table Top Video for information along with more closeup video.

Starting with the velocity for the Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle Combo, Beeman claims up to 495 fps but does not say weather thesis for the .22 or .177 caliber barrel? I placed 5 rounds through my Chronograph using the .22 Caliber barrel option and was able to average 432 fps using 14.3 grain lead pellets which gave me an energy of 5.93 foot pounds. I would say it is safe to say that you can hit close to the claimed velocity of 495 fps with .22 Caliber lead pellets but would need to be using a bit light grain pellets closer to around 10 or 11 grain. I did not test .177 caliber pellets but they are even lighter and will have an even higher velocity most likely be over 500 fps.

View fullsize

While I was testing velocity to make things more efficient I also placed my shots on a paper target setup around what I estimate to be around 80 feet down range. Now I admit I am not the best long range shooter especially with Spring Piston Air Rifles but I was able to get around a 4 inch grouping at this distance with two shots on top of each other and the other three where more sporadic but I’m pretty sure the spreed was mostly because of my shooting skills with a rifle like this. I was using the provided Beeman 4x30 optical scope for this test rather than the open sights. My pellet choice was .22 Caliber Crosman Premier Hollow Point 14.3 grain lead Pellets.

What I like about the Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle Combo is for sure the smooth trigger, the ability to change barrel to either .177 Caliber or .22 Caliber and I like the feel of the stock with its modern look and pistol grip for a comfortable hold. I was not a fan of the 4x30 scope as it seemed a bit fuzzy to me, maybe the optics where off on mine as the other Beeman 4x30 scope that came with the 1042 I tested was super crisp? Lastly I have to say the break barrel on this spring piston does take some arm strength so if you are smaller or not as strong then you may have difficulty cocking the Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle Combo. All in all it’s a good overall springer with lots of features for a relatively low cost.

• Buy the Beeman Break Barrel Pellet Rifle Rifle in Canada

• Buy the Beeman Break Barrel Pellet Rifle in the US

View fullsize

In this Field Test Shooting Video I get outside for a change and test out the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle to see what the actual velocity is and what kind of accuracy I can expect shooting at much further ranges than my Sea Can Airgun Range can offer. If you want to know more about specifications and details for this Break Barrel Air Riffle make sure to watch my Table Top Video for information along with more closeup video.

Starting with the velocity for the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle, Beeman claims up to 475 fps but based on how light the spring feels when cocking this Airgun I was not expecting to get that high of fps. I placed 5 rounds through my Chronograph and was able to average 361 fps using 14.3 grain lead pellets which gave me an energy of 4.14 foot pounds. This isn’t bad in terms of energy but I would not suggest this Air Rifle for pest control because of the lower fps unless you are shooting really small pests at closer ranges.

View fullsize

While I was testing velocity to speed things up I also placed the same rounds on my paper target setup around I would say 80 feet down range (Best guess). Keep in mind I am not the best long range shooter especially with Spring Piston Air Rifles but I was able to get around a 3 inch 5 shot grouping at this distance with three of the shoots all within about 1 inch of each other so not bad for me. I was using the provided Beeman 4x30 optical scope which was nice and crips. My pellet choice was .22 Caliber Crosman Premier Hollow Point 14.3 grain lead Pellets.

What I like about the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle is the easy to cock break barrel, the optical scope, the nice wood finish and its overall performance. I did feel the trigger was a bit heavy and it would be nice to have just a bit more power but that would come at a harder to cock break barrel. If you want an easy shooting and overall good looking lower cost Spring Piston Pellet Rifle in .22 caliber then I would recommend the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle for sure!

• Buy the Beeman Break Barrel Pellet Rifle Rifle in Canada

• Buy the Beeman Break Barrel Pellet Rifle in the US

View fullsize

Type: Pellet Rifle.
Manufacturer: Beeman
Model: 1042.
Materials: Metal and Wood.
Weight: 8.7 pounds (3.9kg).
Barrel: 16 inches (40.6mm).
Propulsion: Spring Piston.
Action: Single Action Single Shot.
Ammunition Type: .22 Caliber Pellets.
Ammunition Capacity: 1.
Max FPS: 475 Claimed.

Trigger Pull: The trigger on the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle is single action only requiring you to break the barrel and compress the internal spring piston before you can shoot it. This will also engage the safety which you have to disengage for each shot manually as an added safety measure. The actual trigger pull is fairly short and light. There is about 2mm of take-up and then a crisp short release with virtually no creep. The trigger is not adjustable but it feels nice as is.

Accuracy: I have not performed any shooting tests with the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle as of yet, I hope to make that Video Review next week “weather permitting” as I want to get outdoors for this test to be able to shoot it at longer ranges. I expect the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle to perform well in the accuracy department using the 4x32 optical scope. In terms of power I did notice that the spring does seem ot be fairly light weight so I am wondering I fi will get close to the claimed 475 fps using .22 caliber lead pellets.

View fullsize

Build Quality: The Beeman 1042 .22 Caliber Break Barrel Pellet Rifle is a China made Air Rifle but looks to be well made. It is mostly metal with a European hardwood stock and feels good to hold resting the rubber butt-pad to your shoulder. I would have lied to have seen the trigger guard being made out of metal rather than plastic.

Realism: The Beeman 1042 .22 Caliber Break Barrel Pellet Rifle is not a copy of any real steel gun in production but does have that overall rifle shape to it so yet it looks like a gun but most people will be able to immediately see that it is a Pellet Rifle and that is exactly what it is since it is not trying to be anything other than that.

View fullsize

Pros:

• Nice European hardwood ambidextrous stock.

• Ported Muzzle Break is looks goos and may enhance performance a bit.

• .22 caliber with close to 500fps so as much energy as you can get without a firearms license in Canada.

• Sport trigger with autumn safety system.

• Comes with included 4x32 scope and mounts.

• Very solid build at 8.7 pounds.

• Nice rubber butt-plate looks good and adds to shooting comfort.

• Has a scope stop so your scope will stay nicely in place.

Cons:

• Does not come with included iron sights.

• Really hard to find this exact gun for info, not even on Beeman’s website.

• Made in China.

Comments:
The Beeman 1042 .22 Caliber Break Barrel Pellet Rifle is a very affordable Break Barrel Spring Piston Pellet Rifle with a really nice European hardwood ambidextrous stock. I like that it has that clean look with no iron sights but rather the included 4x32 optical scope which I am sure will really help with accuracy at further out distances. I hope my Field Test Shooting Video for the Beeman 1042 .22 Caliber Break Barrel Pellet Rifle will do it justice as a target rifle, I am not sure if this one will be any good for pest control as I have my concerns about the fps but will find this out shortly.

• Buy the Beeman Break Barrel Pellet Rifle Rifle in Canada

• Buy the Beeman Break Barrel Pellet Rifle in the US

View fullsize

Type: Pellet Rifle.
Manufacturer: Beeman
Model: Longhorn II 10611.
Materials: Metal and Polymer.
Weight: 8.5 pounds (3.77kg).
Barrel: 18 inches (45.7mm).
Propulsion: Spring Piston.
Action: Single Action Single Shot.
Ammunition Type: .177 and .22 Caliber Pellets.
Ammunition Capacity: 1.
Max FPS: 495 Claimed.

View fullsize

Trigger Pull: The trigger on the Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle is single action only requiring you to break the barrel and compress the internal spring piston before you can shoot it. This will also engage the safety which you have to disengage for each shot manually as an added safety measure. The actual trigger pull is pretty good overall. There is very little take-up but the creep is on the longer side but very smooth not requiring too much pressure. The release is also smooth but will take a bit of time to learn just exactly when it is going to release. There is an adjustment screw for the trigger but it is not advertised or explained in the manual exactly how this effects the trigger pull so a bit of trial and error may improve the trigger feel.

Accuracy: I have not performed any shooting tests with the Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle so far, I hope to make that Video Review next week “weather permitting” as I want to get outdoors for this test to be able to shoot it at longer ranges. I expect the Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle to perform well in the accuracy department especially with the 4x32 optical scope installed. In terms of power I did notice that the spring does seem ot be fairly strong so I am hoping to get close to the claimed 495 fps even using .22 caliber heavier grain pellets.

View fullsize

Build Quality: The Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle is a China made Air Rifle but looks to be well made. It is mostly metal other than the synthetic modern stock, even the iron fiber optic sights are full metal front and back. I am not a big fan of the stock texture patter but it does work to add extra grip.

Realism: The Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle is not a copy of any real steel gun in production but does have that overall rifle shape to it so yet it looks like a gun but most people will be able to immediately see that it is a Pellet Rifle and that is exactly what it is since it is not trying to be anything other than that.

View fullsize

Pros:

• Comes with two barrels for .177 and .22 caliber pellets.

• Comes with included 4x32 scope and ring mounts.

• Durable synthetic stock with modern look and pistol grip.

• Can also shoot using included iron metal fiber optic adjustable sights.

• Automatic trigger safety system.

• Rated at 495 fps using .22 caliber pellets so top out at max Canada legal power without a firearms license.

• Nice rubber butt-pad looks good and adds to shooting comfort.

• Has a scope stop so your scope will stay nicely in place.

• Really well priced for what you get which is two rifles one.

Cons:

• Changing out barrels does require tools.

• Not a big fan of the stock texturing pattern.

• Made in China.

View fullsize

Comments:
The Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle is a very affordable Break Barrel Spring Piston Pellet Rifle that offers two Airguns in one with it’s interchangeable barrel system allowing you to shoot either .177 or .22 Caliber pellets. You also have the option of using the already installed Fiber Optic fully adjustable sights or you can install the included 4x32 Optical Scope for potential longer range shooting. The modern looking synthetic stock with it’s pistol grip and rubber butt-pad will make shouldering this Air Rifle super comfortable and I would imagine help with accuracy at the end of the day.

• Buy the Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle in Canada

• Buy the Beeman Longhorn II 10611 .177 .22 Break Barrel Pellet Rifle in the US

In this Preview Unboxing Video I showcase three Pellet Guns from Beeman, one Single Stroke .177 Caliber Pellet Pistol and two Break Barrel .177 and .22 Caliber Pellet Rifles. I don’t go into a lot of details on each Airgun as I am leaving that information for my future Table Top and Field Test Videos. This video is mainly a heads up on these products with links to where you can buy them in our Online Replica Airgun Store.

View fullsize

Beeman 2004 Single Stroke .177 Pellet Pistol:

• Type: Single Stroke Pellet Pistol

• Caliber .177

• FPS: 410

• Ammo Capacity: 1

• Weight: 1.7 pounds

• Length: 9.25 inches

• Material: Metal & plastic

• Action: SAO Single Shot

View fullsize

Beeman Longhorn II Dual Caliber Pellet Rifle:

• Type: Break Barrel Pellet Rifle

• Caliber .177 and .22

• FPS: 495

• Ammo Capacity: 1

• Weight: 8.5 pounds

• Length: 45.4 inches

• Material: Metal & plastic

• Action: SAO Single Shot

View fullsize

Beeman 1042 .22 Caliber Pellet Rifle:

• Type: Break Barrel Pellet Rifle

• Caliber .22

• FPS: 475

• Ammo Capacity: 1

• Weight: 6.3 pounds

• Length: 42.7 inches

• Material: Metal & Wood

• Action: SAO Single Shot

View fullsize

I know this is an Airgun channel but when I get something that I feel my audience would be interested I in, I generally share it with everyone. I know many Airgun enthusiasts are interested in Airguns for a few reasons like the lower cost to buy and operate, the fact that there are more situations where you can shoot an Airgun and perhaps availability of these guns in terms of purchasing them without a license and laws pertaining to overall size, barrel lengths, magazine capacities and the likes. My latest acquisition does tick some of these boxes for sure.

View fullsize

My latest “Birthday” purchase was the GSG-16 which is a 22LR rimefire rifle made by www.GermanSportGuns.com and it is sort of an MP5 copy but this version is more like a Frankenstein version of an MP5 combined with an AR-15 in order to make H&K happy. Previous version of the GSG-16 (the GSG-5 and GSG-522) where too similar to the MP5 and so GSG had to make a third version less MP5-ish.

View fullsize

That said the GSG-16 has all the same controls as the MP5 so for training purposes it would be very suitable. Personally I like what GSG did in order to bring the GSG-16 to market without legal ramifications from H&K. I like all the rails and the way it kind of looks a bit more like an AR-15 even if the controls are not the same.

View fullsize

If you do like the MP5 look there are some kits out there for the GSG-16 to turn it back into more of an MP5 looking rifle but for me I don’t need to spend the extra money to be happy with the GSG-16.

No we do not have this item in our Replica Airguns Stores as we really only cater to guns that do not require any sort of lisenceing or permits. The closest thing you can buy I would say would be either the Umarex HK MP5-PDW CO2 BB Rifle, one of the MP5 Airsoft Rifles we have or even the Crosman MPW Blowback CO2 BB Rifle which is more AR based.

View fullsize

This was an unusual Field Test Review for me to do as I really don’t test out Bows or Crossbows all that much and I don’t have the best backstop setup for doing such reviews. So I spent some time making a backstop that was capable of stopping these just over 6 inch almost 10 gram or 150 grain bolts. It required some layers of foam and cardboard along with a blanket behind just in case, and even with this setup the bolts managed to lodge themselves right up to the Fletching (feather part of the arrow). Also make sure to watch my Table Top Video Review for the Bear X Desire XL Crossbow to see it up nice and close and get all the specifications and features.

I kind of wanted to change up this review just a bit and so I recorded my Chronograph Velocity at the same time as I did my Target or Accuracy Test to simplify things. I used 5 bolts in all and got what I felt was a good result using the Bear X Desire XL Crossbow.

In terns of velocity Bear X claims that the Bear X Desire XL Crossbow will shoot around 175 fps. I was able to get consistent 190+ fps readings using the 147 grain 6.5 inch aluminum bolts with my lowest fps being 192 and the highest being 194 so super consistent. This gave an overall Foot Pound energy of 12.4 foot pounds! This is enough for small pests for sure, it really comes down to accuracy at this point as you will want to get either a head or shoulder area shot for a humane kill.

View fullsize

I did do a pre test to make sure I was on target and duding this test I was able to get about a 5 inch 5 shot grouping. During my recored Accuracy Test this did open up a bit as one arrow went high and to the right so if I leave that arrow out of the test I did manage to get another 5 inch grouping with three of the arrows all within 1.5 inches of each otter. I figure with high quality arrows and some practice time using the Bear X Desire XL Crossbow, you should be able to use it for small pest control at least at closer in ranges.

All in all the Bear X Desire XL Crossbow surprised me with how powerful it really was and with the accuracy using standard default bolts. This is for sure not a toy and you would never want to accidentally shoot this at someone as it could cause a very serious injury or even death and I mean that since these arrow would for sure pierce several inches into the body. So if you’re looking for something with a bit more raw power than your standard non-regulated Airgun, then check out the Bear X Desire XL Crossbow over in both our Canada and US Online Replica Airguns Stores.

• Buy the Bear X Desire XL Crossbow in Canada

• Buy the Bear X Desire XL Crossbow in the US

View fullsize

Type: Compact Crossbow.
Manufacturer: Bear X.
Model: Desire XL.
Materials: Metal & plastic.
Weight: 2.3 pounds (1 kilograms).
Length: 20-22 inches.
Propulsion: Bow.
Action: Single action trigger.
Ammunition Type: Aluminum bolts (Comes with 3).
Ammunition Capacity: 1.
FPS: 175fps.
Draw: 60 pounds

View fullsize

Trigger Pull: The trigger pull on the Bear X Desire XL Crossbow is medium to heavy, it is a single action only trigger as you need ot cock the bow in order for the trigger to be engaged. The safety is also engaged when you cock the bow requiring you to take the Bear X Desire XL Crossbow off safe before shooting as an added layer of safety.

View fullsize

Accuracy: I have not made my Field Test Shooting Video for the Bear X Desire XL Crossbow and so I have not sea what to expect for it. I have watched a few videos of other people reviewing it and it looks to perform fairly well but until I get a few bolts in a target downrange I can not say for certain the accuracy of the Bear X Desire XL Crossbow. I will have to figure out some sort of a usable back stop in order to make this Field Test Shooting Video but have some ideas already on material to use as my back stop. FPS is claimed ot be around 175 and I will be doing my best to Chronograph the Bear X Desire XL Crossbow so we can confirm that rating for ourselves…

View fullsize

Build Quality: The Bear X Desire XL Crossbow is actually made pretty decently, yes it is mostly plastic and light weight but feels sturdy enough to hold, the only real metal I can confirm is the cocking rail, mostly everything else other than the nuts and bolts that hold it together are some sort of plastic, the bow itself may be a composite material but I am not sure what exactly it is?

View fullsize

Realism: The Bear X Desire XL Crossbow is not a Replica as is what I usually review here on the channel. But I think their is a crossover in terms of interest for a product like this with people that are also interested in airguns. I know I like the Bear X Desire XL Crossbow and can see a place for it in my collection even if it’s not a replica product.

View fullsize

Pros:

• Fairly inexpensive.

• Super light weight.

• Can shoot in a variety of situations.

• Easy to draw the bow.

• Safety is automatically engaged.

• Picatinny rail already has iron fully adjustable rear sight but can mount a red dot if you like.

• Fiber optic front sight.

• 3 bolts included.

• 175 fps (not sure of the ft/lbs)?

• Comes with fore grip.

• 3 portion adjustable rear but stock.

View fullsize

Cons:

• Will need a good backstop or will lose or damage a lots of bolts.

• Takes a little bit of time to set it up but not too hard if you follow the instructions.

View fullsize

Comments:

The Bear X Desire XL Crossbow is an interesting product that once purchased and if you manage to not lose the bolts will cost virtually nothing to shoot since you can reuse the bolts all day long given you shoot them on target and that target does not damage the bolts. It may not offer the rapid fire action shooting of a replica semi auto CO2 Pistol but still challenges the shooter in terms of getting the best possible accuracy out of it and at the end of the day trigger time is trigger time! If you are looking for something a bit different than your CO2 Air Gun then maybe the Bear X Desire XL Crossbow will fill that requirement.

• Buy the Bear X Desire XL Crossbow in Canada

• Buy the Bear X Desire XL Crossbow in the US

In this Preview Unboxing Vimeo Video I take a look at five very different products! A Spring Piston .177 Caliber Pellet Pistol, an Airsoft GBB Pistol, a Compact Crossbow, a full auto CO2 Blowback BB Pistol and a PPC .22 Caliber Pellet Rifle.

View fullsize

First up is the Umarex Ruger Mark IV Spring Piston Pellet Pistol which is a single shot replica pellet pistol that shoots .177 caliber pellets at up to 320 fps using a spring piston break barrel system. The Umarex Ruger Mark IV Spring Piston Pellet Pistol is a target plinker with fully adjustable fiber optic sights and should be a lot of fun to shoot!

View fullsize

Next I take a look at a Gas Blowback Airsoft Pistol from Action Army that closely resembles the Ruger Mark IV pistol with perhaps a more compact look. The Action Army AAP-01 GBB Airsoft Pistol is full blowback a full size drop out magazine and fiber optic sights. It also come with a threaded barrel and barrel extension for adding a longer barrel and much suppressor.

View fullsize

Next on my list of new items is the Bear X Desire XL Crossbow which is a 2.2 pound compact bolt shooting crossbow that sports a rail system with included adjustable iron sights that also allow for a red dot if you want to really customize it. The Bear X Desire XL Crossbow has a 60 pound draw and shoots arrows/bolts at up to 175 fps.

View fullsize

Another AR BB Rifle/Pistol from Crosman is the Crosman A4-P Full Auto CO2 BB Pistol which is essentially a pistol version of the AR Platform. If you like the Crosman DPMS SBR, R1, PDW then you will probably also like the Crosman AP-4. Like the others it uses dual CO2’s and shoots 4.5mm Steel BB;s in semi or full auto at 1400 rounds per minute until the 25 round magazine is empty.

View fullsize

Last included in this preview video is the Air Venturi Avenger Regulated PCP Pellet Rifle. I’m a bit uncertain about this one as I am pretty sure it is the non detuned PAL version that requires a firearms license here in Canada as it shoots at full velocity (.22 caliber pellet at 950 fps). If that’s the case then it will not be available in our Canada Replica Airguns Store but may be available in the US Replica Airguns Store. If it is the detuned version or a detuned version becomes available in Canada then I imagine we will at some point have it in the Canada replica Airguns Store. That said the Air Venturi Avenger Regulated PCP Pellet Rifle uses compressed air and shoots either .177. .22 or .25 caliber pellets using a latch system and rotary magazine.

After about 4 years or so of not getting sick at all, I was almost starting to think I was impervious to viruses and colds and flues and then it finally happened… I got the Rona.

Now I am not 100% sure if it is the Rona since I have not been tested yet but all signs indicate it’s probably Omicron. I have ordered some antibody tests that I expect to come in shortly, I will be checking my blood for Covid-19 Antibodies once I know my body has had enough time to make them after getting sick this time.

In this video I talk about my symptoms and how I felt start to finish getting the Rona. I can say at least for me it was not big deal, the soar throat was probably the worst of it for me.

View fullsize

Type: Pellet Rifle.
Distributer: Webley & Scott.
Model: Valuemax.
Materials: Metal and polymer build.
Weight: 6.4 pounds (2900 grams).
Barrel: 17.7 inches (450mm), rifled.
Total Length: 43 inches (1092mm)
Propulsion: Spring Piston
Action: Break Barrel.
Ammunition Type: .22 Caliber Pellets.
Ammunition Capacity: Single Shot.
FPS: 499.

View fullsize

Trigger Pull: The trigger pull on the Webley Valuemax .22 Caliber Spring Piston Break Barrel Rifle is fairly nice There is a little bit of very light take up followed by a vert light release , the take up or travel length can be adjusted on this Air Rifle but that is the only trigger adjustment you can make and perhaps all that is needed.

Accuracy: I have not performed my Field Test Shooting Video for the Webley Valuemax .22 Caliber Spring Piston Break Barrel Rifle but I did get to take around 20 or so shots with it when I was trying to get it to diesel for me. It looks ot me like it is going to be nice and accurate as I was not even really going for accuracy and it seemed to already be grouping fairly tight. I was recoding fps using my Chronograph as I was trying to find out if by adding some oil to the spring piston chamber could get it to diesel which it never did for me, I was however to establish that the Webley Valuemax .22 Caliber Spring Piston Break Barrel Rifle shot right around 470-480 fps using 14.3 grain lead pellets which worked out to right around 7.32 foot pounds of energy. I will know a lot more when I do my official Field Test Shooting Video next week.

View fullsize

Build Quality: Webley Valuemax .22 Caliber Spring Piston Break Barrel Rifle is built to be a value priced Airgun hence the name (Valuemax), that said it is maid well enough with lots of metal and of course some plastic or in this case mostly nylon as the stock is a solid nylon piece. Other than the stock the plastic parts are found to be in the sights and trigger guard, everything else seems to be metal.

Realism: The Webley Valuemax .22 Caliber Spring Piston Break Barrel Rifle is not a replica or copy of any real steel gun in production but it does look like a traditional hunting rifle in basic shape so make sure to transport thank airgun as if it was a real gun. Either in a gun case or perhaps a blanket in your trunk and always obey any laws for gun position and transportation in your area.

View fullsize

Pros:

• Inexpensive price tag for well made decent performer.

• Initial test showed to have good accuracy and power! (more to come).

• Fully adjustable sights with optical TRUGLO Fiber Optics.

• Can add a magnified optical scope using the top built in dovetail rail.

• Nylon fiber stock is durable and functional with the addition of a vented rubber buttplate.

• Trigger feels decent and is also adjustable for travel length.

• Rear thumb safety resets after each break of the barrel.

• Nice light and short single action trigger.

• Would be good for small pest control because of decent FPS and good accuracy.

View fullsize

Cons:

• Included sights are mostly plastic.

• The Valuemax version has a more basic less adjustable trigger.

• Detuned down to under 500 fps for Canada import as non-regulated Firearm.

View fullsize

Comments:
I am looking forward to performing my Indoor Field Test Shooting Video for the Webley Valuemax .22 Caliber Spring Piston Break Barrel Rifle to see what it can really do in terms of accuracy so stay posted for that video next week. Overall if you are lucky enough to already have one or can get your hands on one since this rifle is discontinued in some area, I think this is a great Break Piston Air Rifle especially if you live in Canada and want the most bang for your buck. I am not only talking about cost verses features, I also mean power and energy since the Webley Valuemax .22 Caliber Spring Piston Break Barrel Rifle is a .22 caliber Air Rifle that can shoot really close to 500 fps with a nice heavy grain lead pellet achieving decent energy levels reasonable enough for small pest control. The Webley Valuemax .22 Caliber Spring Piston Break Barrel Rifle is not feature less, it does include a reseting safety, anti bear trap system, dove tail mounts with an included scope stop, fiver optic adjustable sights and a vert ergonomic textured nylon stock. All in all great value for what you pay!

My Vimeo Videos for the Webley Valuemax .22 Caliber Spring Piston Break Barrel Rifle:

• Buy Break Barrel Spring Pistol Pellet Rifles in Canada

• Buy Break Barrel Spring Pistol Pellet Rifles in the US

View fullsize

Wow, an accessory review, not many of these :) Today I take a look at the Amomax Airsoft Airgun Holster product line since at some point you may want to put your gun in a holster or practice drawing your gun from a holster?

The good news is we just got in a decent amount of product for our Amomax Airsoft Airgun Holsters. Here is a bit of info about Amomax but of course make sure to watch the video as I take a good look at a few of the versions we sell in our Canada and US online Replica Airguns Stores.

View fullsize

Amomax holsters are compatible with 4 different carrying platforms :paddle (standard), belt clip, MOLLE, and drop leg platforms. All the carrying platforms can be replaced by only one screw. Users can carry them in daily use, outdoor sports, normal shooting training and competition. Holster will stay firmly on a belt, leg and MOLLE system even in fast moving situations with a quick release Retention System button that keeps the gun locked in place until you are ready to draw. Holster body and carrying platform are connected with a tooth gear that allows for 360 degrees of rotation. User can easily adjust the carrying position to fit their needs.

View fullsize

Amomax Holsters are currently available in the following versions:

• Glock 17/22/31

• 1911 (Fits most brands 1911’s)

• USP

• Sig P320

• Single and double Universal Magazine

• Buy Amomax Airsoft Airgun Holsters in Canada

• Buy Amomax Airsoft Airgun Holsters in the US

View fullsize

As with most of the new tech I purchase or acquire that I will be using in my Videos for either my GetFitOver40 or ReplicaAirguns YouTube channels, I generally like to do some sort of a practical review for the item. In this case I take a look at the Synco G1 (A2) Wireless Microphone Set which is a pair of wireless transmitters that pair with a single dedicated receiver allowing me to quickly and easily capture good quality audio for my Videos.

For the past couple of years my go to microphone setup for my video was to use a generic lapel mic connected to my Samsung Galaxy Smartphone recording into an audio program. I would then send the audio file via dropbox to my computer where I would then line up the audio file with the video file in my video editing software to get a much higher quality and more clear voice recording versus what the camera mic would be able to capture.

This system has been working fairly well for me but required a somewhat cumbersome lapel cable and of course my bulky Smartphone in my pocket at all times but did allow me to be as far away from the camera as I wanted without any interference or loss of audio clarity.

View fullsize

After playing around with the Synco G1 (A2) Wireless Microphone System I have determined I will most likely simply be clipping the transmitter onto my shirt without the lavaliere mic plugged in and transmitting the audio into either my Samsung Smartphone or my iPad where I can then again dropbox the audio file to wherever I plan on editing the video.

This video was kind of a test to see how everything sounded in terms of the lapel mic versus the built in mic. What settings to use and how distance effected the audio signal and quality. Unfortunately the lapel mic was a bit close to my voice causing some distortion to occur but you can still hear what I am saying no problem. In the future I would place the lapel mic a bit further away from my voice lower down on my shirt or simply use the built in mic as it was not as sensitive to this distortion and seemed to handle louder volume much better than the lapel mic.

View fullsize

Here are some of the specifications for those that like that sort of info :)

Transmitter (TX )

• Wireless Transmission - Digital 2.4GHz

• RF Frequency Band - 2400-2483.5MHz

• Working Distance - 164ft/50m (LOS area) 98ft/30m (NLOS area)

• Latency - 12.5ms

• Mounting - Pocket Clip

• Audio Input - 1/8" / 3.5 mm TRS Mic Input

• Audio Input Level - 1V (0dBV)

• RF Output Power - ＜10mW

• Power Requirement - 3.3V-4.7V

• Battery Type - Built-in Lithium Battery

• Battery Charging Time - 1.5h

• Battery Life - 5h

• Dimensions - 52X42X16mm

• Material - Plastic

• Weight - 35g

Receiver (RX)

• Wireless Transmission - Digital 2.4GHz

• RF Frequency Band - 2400-2483.5MHz

• Approximate RF Sensitivity - -81dBm

• Working Distance - 164ft/50m (LOS area) 98ft/30m (NLOS area)

• Latency - 12.5ms

• Mounting - Pocket Clip

• Number of Audio Channels - 2

• Audio Output - 1/8” / 3.5 mm TRS Mic Output - 1/8“ / 3.5 mm TRS Headphone Output

• Gain - 0-4 Level (0 to 8dB)

• Audio Output Level - Line Out: 1V, Monitoring: 25-30mW

• Power Requirement - 3.3V-4.7V

• Battery Type - Built-in Lithium Battery, 400mAh

• Battery Charging Time - 1.5h

• Battery Life - 5h

• Dimensions - 52X42X16mm

• Material - Plastic

• Weight - 35g

Microphone

• Form Factor - Built-in/External Mic

• Sound Field - Mono

• Polar Pattern - Omnidirectional

• Frequency Response - 50Hz-20KHz

• Sensitivity - -40dB (±3 dB, re 1V/Pa at 1KHz)

• Max. Input SPL - 135dB SPL (at 1KHz)

I made a video a little bit ago talking about how Canada’s new Bill C-21 will affect pretty every gun owner in Canada including even airgun owners of BB, Pellet Airsoft and even Paintball Guns. Make sure to watch that video first called Bill C-21 Canada is Going After Your Red Ryder BB Gun.

This video is all about how you can get involved in making some waves by signing two online petitions along with contacting your local Member of Parliament and letting them know your disapproval of Bill C-21 and all that it imposes on law abiding Canadian gun owners.

Probably the most important online petition to sign would be the House of Commons Petition E-3201 Bill C-21 so make sure to sign that one!

The other online e-petition we need to sign is the change.org petition.

And lastly but also super important is to send an email to your local member of Parliament again let them know your disapproval of Bill C-21. I have included a link to the web[age where you can locate your local MP and below that is a template of what you could include in your email to them.

https://petitions.ourcommons.ca/en/Petition/Sign/e-3201

Dear (MP),

I am a constituent in your riding. I am writing to you to voice my concerns over the new provisions that were announced under the proposed Bill C-21, and how this will impact myself, my community and many other Canadians.

"Criminal Code 1 (1) The definition replica firearm in subsection 84(1) of the Criminal Code is replaced by the following:

replica firearm means any device that is designed or intended to exactly resemble, or to resemble with near precision, a firearm that is designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second and at a muzzle energy exceeding 5.7 Joules, and that itself is not a firearm, but does not include any such device that is designed or intended to exactly resemble, or to resemble with near precision, an antique firearm; (réplique)

(2) Section 84 of the Act is amended by adding the following after subsection (3.1): Certain firearms deemed to be prohibited devices

(3.2) For the purposes of sections 99 to 101, 103 to 107 and 117.03, a firearm is deemed to be a prohibited device if

(a) it is proved that the firearm is not designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second or at a muzzle energy exceeding 5.7 Joules; and (b) the firearm is designed or intended to exactly resemble, or to resemble with near precision, a firearm, other than an antique firearm, that is designed or adapted to discharge a shot, bullet or other projectile at a muzzle velocity exceeding 152.4 m per second and at a muzzle energy exceeding 5.7 Joules."

Make sure to also sign ePetition e-3201 to put a stop to Bill C-21:

https://petitions.ourcommons.ca/en/Petition/Sign/e-3201